Software updates package at install pending for a secondary site

Hello all,
For the last 2 weeks I have been fighting ore secondary server that will not download a software updates package. It continues to say "install pending" I keep seeing the same message in the Distmgr.log on the secondary server. I
have checked the despoil.log, sender.log and replmgr.log and do not see anything that sticks out as being a error. I have other packages that can be sent to this distribution point without any problems so I know the permissions are ok.
I have removed the packaged and added it back a few times and waiting day between removing it and adding it back.
This all started when the drive ran low on space and this was the package that ran the drive out of space. My best clue is in the distmgr.log file I see it says package JFG0001ED requires a newer version (5) and the current version is 4. The
problem is the distmgr.log file on the primary server is trying to push version 8 and that is the current version going to the other distribution points. It appears that the secondary server is trying to get an different version than the primary
server is serving up.
I have also removed the distribution point role from the secondary server and added it back. I'm pretty sure recreating the package will fix the issue but since it is an update package it is almost 5GB that I would have to resend
to 40 other DPs.
~Processing incoming file C:\Program Files (x86)\Microsoft Configuration Manager\inboxes\distmgr.box\INCOMING\ZMJO6LPC.PKG. $$<SMS_DISTRIBUTION_MANAGER><Fri May 30 08:43:28.556 2014 Central Daylight Time><thread=2204 (0x89C)>
~Adding package JFG001ED to the active package array. $$<SMS_DISTRIBUTION_MANAGER><Fri May 30 08:43:28.587 2014 Central Daylight Time><thread=2204 (0x89C)>
~Package JFG001ED requires a newer version (5) of source files and the new compressed files haven't arrived yet, current version is 4, skip C:\Program Files (x86)\Microsoft Configuration Manager\inboxes\distmgr.box\INCOMING\ZMJO6LPC.PKG $$<SMS_DISTRIBUTION_MANAGER><Fri
May 30 08:43:28.587 2014 Central Daylight Time><thread=2204 (0x89C)>
~Removing package JFG001ED from the active package array. $$<SMS_DISTRIBUTION_MANAGER><Fri May 30 08:43:28.587 2014 Central Daylight Time><thread=2204 (0x89C)>

I would remove the package from that distribution point. Once that is done, and it's not waiting for a new version, you can try sending again. Assuming you now have the space for it.

Similar Messages

Software Update doesn't install Java for Mac OS X 10.5 Update 1

The installation blue bar gets about 60% of the way across the screen then seems to freeze and doesn't go any further. Has anyone else had any similar problems with this install? All other software updates are fine.

Manually download and install it.

Hi, i have question about my macBook pro. I have a somehow managed to delete a driver or no, so I can not install new software updates. I have tried for several hours to fixe it on OS X tools-Disc Tools. anyone has a clue about this more than I have.

I have a somehow managed to delete a driver or no, so I can not install new software updates. I have tried for several hours to fixe it on OS X tools-Disc Tools. anyone has a clue about this more than I have about Mac´crack that **** formatted and has really nothing to the HD. what do I do??
<Edited by Host>

Cami87,
which model MacBook Pro do you have, and which version of OS X is installed on it?

HT4718 My macbook air is stuck at the "installing software updated" screen while installing update for the osX. What should I do?

My macbook air is stuck at the "installing software updated" screen while installing update for the osX. What should I do?

Welcome to Apple Support Communities
If your Mac has been installing software updates for a long time, Software Update is probably frozen. Hold the Power button until your MacBook Air turns off, and turn it on again. OS X should start up.

How do I know if the Maverick software update has been installed on my mac?

How do I know if the Maverick software update has been installed on my mac?

It will not download if you already have it.
Just to be 100% clear …
Look in /Applications for "Install OS X Mavericks"
Use the Finders Go menu > Applications. To open it.
You may have an Applications folder in your Home directory too, it shouldn't be in there but it is possible.
Also try Spotlight to see if it can find that filename.
Can you also tell us what system you have?
Apple menu > About this Mac > more info button… What is the Model (under the Overview tab).
10.9 doesn't install on all systems, so it could explain why you can't get it, however it usually displays a dialog stating that fact.

Why distribute Software Update Packages to DP's?

I recently integrated WSUS with SCCM 2012 and deployed my first update package, I distributed it to our DP's at each of our facilities and then deployed the package. I am seeing results but it looks like all my clients are going directly to the Active
SUP for the updates instead of grabbing them from their DP's (which is causing my admins to flip over bandwidth usage). If the clients can only grab the updates from the SUP itself what is the point of distributing the software update package to them?
Is this things running as intended or should they be looking to their DP's for this? I have already investigated the option of setting up secondary sites and creating downstream SUP's but I am seeing conflicting forum posts mentioning that the DP's should
handle to update downloads so I don't want to commit to reorganizing our SCCM infrastructure when there is a simpler solution to this.

Yes the SUP was previously the Upstream server for our stand alone WSUS environment, when we integrated WSUS with SCCM we cleared the GPO directing PC's where to get updates from so that it would not interfere with the default client policies I have set.
Interesting point about the DP on the SUP, it does have a DP role assigned as it was the DP for our corporate office. I know the boundaries are configured correctly because my software packages are downloaded by the clients from their local DP's, I even double
checked this to make sure they were not assigned to this DP for some reason. We have the CAS set as the fallback point as well so I don't think that is why either. Our CAS has a DP role and could serve as this for our corporate office, would it be worth a
shot to clear the DP role from the SUP server and see if this reassigns the WUA managed server for the clients?
<![LOG[Enabling WUA Managed server policy to use server: http://NAME OF SUP.DOMAIN.LOCAL:8530]LOG]!><time="08:36:20.522+360" date="02-26-2014" component="WUAHandler" context="" type="1" thread="3924" file="sourcemanager.cpp:938">
That is an excerpt from the WUAHandler.log on one of the clients at a one of our facilities, would this be the correct place to see where it is downloading the update from? My network admin originally tipped me off to this when he was noticing high bandwidth
utilization from our facilities and traced the packets out to our SUP. I edited out the name of the SUP but I know this is the assigned SUP for my Primary site.

Why Software Updater does not install some updates automatically?

QuestionWhy Software Updater does not install some updates automatically?
AnswerSoftware Updater only installs security-related updates automatically. Non-security-related updates, and service packs installation are required to be initiated manually via the Software updates tab under the Policy Manager Console.
In Policy Manager 12, a checkbox Show non-security-related updates has been introduced under the Policy Manager Console > Software tab. Unchecking the checkbox hides the following update types:
Microsoft security tools
Non-security updates
Service packs
Note: This checkbox is Policy Manager Console-specific setting. If you change the setting in one Policy Manager Console, it would not affect another Policy Manager Console connected to the same Policy Manager Server.

amrok90 wrote:
Updater does not detects 5800. I've reinstalled everything as it's stated (as, according to FAQ, sometimes the drivers may get corrupt). Restarted the PC. Nothing happened.
Presumably FOTA not an option for your 5800XM?
Happy to have helped forum with a Support Ratio = 42.5

An amount of software-updates cannot be installed due to an unexpected error?

After downloading Software-updates, an amount of software-updates cannot be installed due to an unexpected error.
Is there someone who had the same problem and can help me?
Thanks in advance for your support!

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select "/var/log/install.log" from the file list. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, start over and note the time. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message.
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

Software updates will not install... error message

Software updates refuse to install for several weeks/months... backed up to six or more updates... cannot get any help from apple unless i pay them 75 dollars but i am sure it is something simple... when i attempt to update, i put in my pass code, they download and when they go to install the error message says "none of the checked updates can be installed, sorry an unexpected error has occurred" vague enough for you? Can anyone help me out, it would be greatly appreciated. Thanks in advance.

What happens when you run Software Update?
Get MacJanitor and run the Maintenance scripts. When it's finished quit MacJanitor and restart your Mac.
Have you checked the hard disk for errors?
Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger and later) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
When you are finished with DU, from the Menu Bar, select Utilities/Startup Manager.
Select your start up disk and click Restart
While you have the Disk Utility window open, look at the bottom of the window where you see Capacity and Available. Make sure there is always 15% free disk space. Not enough disk space can cause directory corruption.
If you cannot boot from your install disk, try booting in Safe Mode
Carolyn

Software Update wants to install Pro Apps Update 2008-05...

I've been running Final Cut Studio 3 on this machine for a long time. Suddenly Software update wants to install the Pro Applications Update 2008-05. The only thing I can think of that might have caused that is that I dragged over a copy of LiveType from an older PPC G5 that was still running FCS2. Not sure if I should allow it or not. If I allow it, will it be smart enough to see that I have more recent versions of all of the apps? Any suggestions?
Thanks,
CJ

Nothing newer will be replaced.

Large Software Update Package size.

Not sure if this is normal or not, but I noticed that our Software Update Packages are HUGE. I've noticed a few things.
Office 2010 Updates are being downloaded for ALL Languages - even though I've only selected English.
I see multiple updates being duplicated. For example:
ie11-windows6.1-kb3021952-x64 - I have two of these files, that are same exact size
(50mb) but they are in two different folders.
One is in D:\Source - Updates\February Updates 2015\c2b0814b-b278-4826-b44d-5054771f93d8 the other is in
D:\Source - Updates\February Updates 2015\4178f1cf-204e-4969-aba8-79a537c9ba45
Is this normal? I typically have one SUG/deployment pkg for each month for both Server/Workstation and office packages, and this month my package is about 3.5 gigs..
Is this normal?? Thanks to anyone that can set me straight!

Hi,
In System Center 2012 Configuration Manager, we’ve added the capability to automatically remove software update content from distribution points when that content is related to expired updates. This process helps manage drive space on your distribution points
by removing any content you no longer need.
Also, please refer to the thread below:
https://social.technet.microsoft.com/Forums/en-US/1cdca30e-8b71-41ab-b2f5-7414623da922/ms-office-2013-sp1?forum=configmanagersecurity
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

SCCM Reporting: Software Updates / Apllication the "Installed date" is missing or null in reports

When the “V_GS_Add_Remove_Programs” or “V_GS_Quick_Fix_Engineering” queried for installed date (the views that contains information on updates/application
installed date), the “installDate0” Column returns “Null” or is
"blank" on most of the rows.
The machine in this example is “X”
2. As you can see from the machines X's add remove Programs installed Date is given clearly.
Appreciate your help on this as its for an audit report of windows updates and applications installed date, I know that some applications do not populate this value but my argument is if its visible from Programs and Features why isn't the data being collected.
Best Regards,
Michael

Duplicated post.
http://social.technet.microsoft.com/Forums/en-US/678489ad-3289-4fd6-8e84-bbaf487abacf/sccm-reporting-software-updates-apllication-the-installed-date-is-missing-or-null-in-reports?forum=configmanagergeneral
http://www.enhansoft.com/

Recreate Software update packages

Hi,
I am working on a new environment where I would like to reorganize the software update packages. Currently, they are organized in 3 types:
- Workstation update packages (W7,8,8.1)
- Server update packages (2003,2008...)
- Application updates (Office...)
For each type there is one package per year (ex: Workstation update packages - 2014...)
Since (per year) I have one package for servers and another one for computers, I end up having the same update twice in 2 different packages (IE update in that case).
I don't think it's a big deal but I would like to "clean" it and regroup it under only one package per year ideally that would contain computer, server and office packages.
Is it possible to reorganize the packages or should I re-download all the updates ?
Also, since I have 3 ADR (Server, computer, Office), I was wondering if it could cause an issue if the three of them point to the same package and are launched around the same time after Patch Tuesday.
Thanks.

Hi,
>>Is it possible to reorganize the packages or should I re-download all the updates ?
If the updates need to be downloaded do not exist in the package, they will be redownloaded.
>>Also, since I have 3 ADR (Server, computer, Office), I was wondering if it could cause an issue if the three of them point to the same package and are launched around the same time after Patch Tuesday.
I think this is OK.
Best Regards,
Joyce
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Software update cannot find installed App's in sub-folder

Hi All,
I have same kind of problem - I created folder called "iLife' 11" and moved there all App's which belong to this package. As soon as I did this Software Update cannot find anything. For example Apple released iPhoto' 11 (9.1.1) update and Software Update did not find it until I moved it back to "Applications".
BTW I have same problem with Adobe App's. Adobe update did not see Photoshop which has been moved to sub-folder.
My question is DO I have any chance to put App's to sub-folder and get them automatically updated by Software update? IF so, what should I do?

All sub-folders located in /Applications/ not in /Users/username/Applications. Actually /Users/username/Applications/ is empty on my mac.
What I trying to have is sub-folder (for example called Photo where I will have all applications for working with images (Photoshop, Nikon Scan, SilverFast and so on) in one locations or iLife' 11.
I took this idea from folder "Utilities" I can put App there and it worked and updated without any problems.
As far as I understand this problem (from Unix point of view) is a PATH problems. Software Update cannot find App in the folder which not listed in PATH.
If I create link (allies) for application in /Applications/ folder it will updated.

HT1338 Software Update message "Failed to check for updates. The operation couldn't be completed. Operation not permitted" MacBookPro 10.74 Lion

The problem..
Software Update message "Failed to check for updates. The operation couldn’t be completed. Operation not permitted"
MacBookPro 10.74 Lion Computer is online, as you can see by this message.
Anyone know what is going on?

Most likely needs to be run under an admin account. What's yours?

Software updates package at install pending for a secondary site

Similar Messages

Maybe you are looking for