Solaris 10.2 OEM Installation: but emctl displays OMS version is 10.1

Hi,
How can I validate the correct version of the installation I did. I though Iwas installing OEM GC Solaris 10.2.0.1. Installer said it was 10.2.0.1. I did an OMS and AGENT install all using same software distro and when I run ./emctl in the agent home/bin it says my Agent and OMS are version 10.1.0.1
--catharine

I think the OTN at one time had the wrong software up there but if you saw it install 10.2 then you should have it. Any chance you are grabbing the emctl from another Oracle home?
Of course you could check with ./runInstaller but how about just looking in /opt/app/oracle/product/agent10g/relnotes ?

Similar Messages

Downloaded os x 5.16 GB and installation but mac shows beta version

downloaded os x 5.16 GB and installation but mac shows beta version.
HOW TO RECTIFY MY MAC OS.

Miracle of all miracles, I can actually see the included image: Build = 14A299I

Solaris 11.2 x86 installation problem on GPT partitioned SSD

I recently bought a new computer with Windows 8.1 pre-installed on it. I want to install Solaris 11.2 as dual-boot together with the pre-installed windows 8.1.
The computer has a 128 GB SSD which is GPT partitioned. The SSD has 5 GPT partitions which are in use. I used a partition manager in Windows to shrink the size of the 5th partition (the windows system partition) so that i now have about 31 GB of unpartitioned, unused space after the 5 used partitions where i want to install Solaris into.
For installation, I downloaded the Solaris text installer ISO and burned it onto a CD-R. Now, whenever the installation menu shows me the GPT partitions of my SSD and i choose "Use a GPT partition of the disk" it always goes back to the first menu screen where it says "Welcome to the Oracle Solaris installtion menu".
Also, the installation menu shows the 5 used GPT partitions correctly, but then it shows me not one, but two partitions as "unused" with a size of 0.0 MB.
What am i doing wrong?

If you have support, then you will be better served by opening a support case.
Assuming you don't, or you would have gone there already... There may well be bugs with supporting multiple OS's under GPT partitions. I have no idea how much testing we did for such cases, and to be totally honest we put little effort into dual-booting systems these days, as using VM's in VIrtualBox or other VM managers is a better answer for 90i+% of people.
That said, posting the output from prtvtoc for the disk would give someone a chance to see if there's an obvious bug.

CS3 installs, but freezes when I attempt to load it (no splash screen... just loads forever)

I have been able to successfully INSTALL Adobe Photoshop CS3: Extended multiple times, however I have yet to actually successfully RUN the application. After installation, when I try to open the program, a window appears with "Adobe Photoshop CS3" at the top and it is simply a large grey box with nothing inside of it. My mouse cursor turns into an hourglass and that's it... I left it there for an hour and a half once just to see what it would do and it simply continued in an endless loop of nothingness.
I have a custom-built computer with an AMD Phenom X4 9850 Black Edition, 2x2GB of OCZ 1066mhz Reaper DDR2, a Gigabyte motherboard with the GX790 chipset (SB750 southbridge), and a 2x1 Terabyte RAID 1 array.
It's running in a brand spanking new Windows XP Professional installation with Service Pack 3.
I have tried the following:
1) Uninstalling and reinstalling (same result)
2) Uninstalling all Adobe programs, Running Adobe Clean Script at level 4, running Windows Install Cleanup to remove any remaining Adobe remnants, and reinstalled. (same result)
3) Doing everything in step 2 again, then copying the CD to my hard drive, and installing from my hard drive. (same result)
4) Doing everything in step 2 again, then making a new administrative user account and reinstalling (same result...)
The adobe tech support guys I encountered came up with some pretty crazy (and flat stupid) explanations for my problems.
One guy claimed that my Serial was for CS1 and that somehow I'd gotten a CS1 disk that just happened to come in a CS3 box, with a CS3 disk label, which just happens to say "Adobe Photoshop CS3 Extended" after you install it... Yeah... Right.
Another said I should reformat... Yeah right. I JUST installed XP Professional. Terrible advice.
Another said that he had tried everything and that it simply wouldn't run on my computer... and that was that (as if I should be satisfied that a program I just spent many $100s on simply refuses to work and there is nothing I can do about it).
Yet another guy (after I finally got shipped off to Indian technical support...) said that he'd seen this problem many times before and that it's linked to an instruction code error related to AMD Phenom processors and that there should be a patch out soon for it. However, I looked up threads where people with Phenom 9850 CPUs (My CPU!) claim to be running the software flawlessly.
Can anyone give me any hope here? I'm about to call Adobe again and attempt to get some kind of intelligent answer to my problem, but in the mean time I was hoping against hope that someone else out there has had this problem and managed to solve it.
Thank you for your help

Hi Everyone,
Problem Solved Yeah!!!
~~~~ Problem: Adobe CS3 Master Collection Installs, but the applications don't run, but are running in a process, or displays and hangs and does not allow for Activation. ~~~~
This has been an issue for me with my dual Quad Core Xeon system for over a year. I believe that it has to do with RAID configurations and an improper pointer to the operating system for activation. I am using Vista 32 with SP1. The majority of Adobe support took me through literally weeks of pain. Unfortunately, I did not talk to Sarah!!!!
The above works and is posted again below!!!!!!!!!!!!!!!!!
1) Go to administrative tools within the control panel and go to Services. Within Services find FLEXnet Licensing Service and start it, if it is not already started.
2) Go here:
http://kb.adobe.com/selfservice/viewContent.do?externalId=kb401528
Install the patch (I know it says it's for Reader and for Vista only but this is false. It works for many apps within the Adobe suite and is compatible with XP). If you press CTRL+ALT+DEL and go to the Processes tab you should see that FNPLicensingService.exe is now running.
3) Start up any application other than Adobe Acrobat. You should be prompted with an activation screen. Enter your serial and activate the package online. CS3 should now be functinal.
THANK YOU AGAIN "SARAH AT ADOBE" FOR ACTUALLY CARING AND YOUR KNOWLEDGE THAT GAVE YOU THE ABILITY TO ACTUALLY HELP. I WISH I COULD THANK YOU PERSONALLY. I HAVE SPENT LITERALLY OVER 90 HOURS WITH OVER 15 CALLS TO ADOBE WITH NO RESULTS.

TS1587 I tried everything, except for reinstalling the SO-DIMM memory modules. Still, my iMac will not wake up. Turning it on you can hear the fan run, but the display stays dark. Any ideas what to do? Thanks Maja

My iMac won't start up, or wake from sleep. I've tried everything, except for reinstalling the SO-DIMM memory modules. Still, my iMac will not wake up. Turning it on, you can hear the fan run, but the display stays dark. Any ideas what to do? Thanks!

Mac doesn't boot
Can you hear the fans and hard drive and see the white boot screen? Flashing question mark? The circle just runs and nothing happens? Only black screen and nothing else? These can be very helpful to diagnose the source of the problem. [1]
Flashing question mark [2]: This is usually a sign of a failed hard drive. This indicates that boot up volume can not be found.
Black screen: This is usually a sign of a failed logic board. There is no single reason for this and this may be caused by failed GPU, screen, CPU or RAM.
Circle of death/no circle/blue screen: This is usually a sign of a hard drive failure. This may NOT be a dead hard drive, just broken permissions or something
Gray screen/Apple logo/spinning gear or globe/prohibitory sign/folder with flashing question mark [3]: This could be a sign of faulty hardware but more likely a software issue, i.e. broken permissions, failed software update, etc.
[edit]
What to do
First, hold down the option key (also known as the alt key) just after you've pressed the power button. This should show all the available options to boot from, so if you have Windows installed through Bootcamp or a disk in your SuperDrive, you should be able to see them along with your OS X drive/partition. Select the OS X partition with arrow keys and press enter. Startup key combinations
If that doesn't help continue doing the steps from below:
1. SMC reset [4]. Shut down and unplug all cables including power cord for at least 30 seconds and then plug in power cord and keyboard/mouse.
2. PRAM reset [5]. Hold down option, command, P and R while booting. Start it when you hear the sound and don't let go before it reboots.
3. Safe boot [6]. Hold down shift while booting to boot into safe mode. If this works, open Disk Utility from Utilities and repair your permissions and verify the disk
4. Hardware test [7]. Insert the install disk (disk 1 in Mac which shipped with OS X 10.5.4 or earlier, disk 2 if shipped with OS X 10.5.5 or newer) and hold down "D" before the grey boot screen opens. Follow on screen instructions
5. Boot from install disk. Boot from the disk that came with your Mac. Hold C while booting. Select Disk Utility from top bar and repair permissions and verify the disk. Reboot normally and see if it works now.
6. Boot from another Mac (Firewire target disk mode). Connect the machines with a Firewire cable. Power on your Mac and press T. Select the other Mac's hard drive. Download the current OS X combo update. Run the combo update installer and select the drive that won't boot as the destination.
7. "Repair" OS X. Boot from the install disk as in point 5. and reinstall OS X. This should NOT erase any data, just replaces the system files which may have caused your booting problem. Now install the latest combo update for OS X and repair permissions on your drive with Disk Utility.
7.1. Install OS X into an external hard drive and then boot from it [8] and try to copy your data from the hard drive before proceeding. If you have done a backup recently, you don't have to do this.
8. Restore OS X from Time Machine backup. Boot from the disk that came with your Mac and choose the Time Machine restore option. This step will lose any changes made since your last backup but the system and your data will be put back to exactly as it was on that date.
8.1 Reinstall OS X. Boot from the install disk as in point 5. and select Disk Utility again. Now erase the whole hard drive and install OS X again. If you had a Time Machine backup and step 7 worked you don't have to do this.

MSI Z97-G45 Gaming can not POST or enter BIOS but has display

Hi
First post here and sadly a technical one. I just bought the following hardware:
- MSI Z97-G45 GAMING MoBo (no idea on BIOS since I cannot enter it at all)
- Intel Core i5 4690K s1150
- 16GB (2x8GB) Patriot Viper 3 Black Mamba 1600MHz CL9 DDR3 Dual/Quad Channel Kit [PV316G160C9K]
- Corsair CX750M PSU
and installed the hardware with the following old hardware that I am carrying over:
- 2 X Hitachi 1TB Sata HDD
- 2 X GTX 275 SLI
To begin with, my existing drives were setup as RAID 0 and has a installed Windows 7 64-bit on there already. I unregistered the Product key before taking it all apart with the idea of registering it again once the new hardware was all together.
So basically, when I received all the new parts yesterday and put them all in. Upon powering on, I see the MSI Dragon logo fullscreen with the option to press DEL or F11. I let it continue without pressing any key to see how it goes. After the dergaon logo, all I get is "Missing Operating System" at the top which did not really worry me and I assumed it would be realted to the Raid not setup (right?)
So I rebooted the PC and decided to press DEL to enter BIOS. However, every time I want to enter the BIOS the screen turns black! The display is still functional though from what I can tell (the display does not lose signal).
Following that, I reset the CMOS from behind by pressing the button with a pen tip. Starting the PC again now gives me a display of all my hardware that it detected (correct CPU, Correct amount of ram, correct HDD etc...). It also gives me two options... F1 to Enter setup or F2 to Continue. Pressing F1 displays the text "Entering Setup..." at the bottom but again it fails to enter the BIOS (it freezes on the above screen - does not turn black this time) and choosing F2 to Continue freezes as well.
I have tried to boot up with the following changes:
- No GPU and use on board VGA only
- One stick of ram in multiple slots
- No HDDs connected at all
- I've checked the CPU to make sure no bent pins
- Reconnected the PSU cables into the motherboard
I should also mention that when I test it on the bare minimum (CPU, PSU, 1 stick of ram) I get A9 in the lower corner before the dragon logo appears.
Right now I am out of ideas and any suggestions would be helpful or at least some insight in what problems I described may indicate. Thanks!

Quote from: Bernhard on 08-July-14, 19:43:46
Can you post your board's serial number. This contains the manufacture date. From that one could deduce the BIOS version on that board.
As for the windows installation from your previous system, you would be very lucky if you were able to boot with that. Perhaps force safe mode if and when you are able to boot, and then try installing the new drivers. The problem is that with the old drivers still in the boot menu, you are probably heading down a slippery slope trying to re-use it. A clean installation would be advised.
Whatever is on the HDD now should however not prevent you from getting into the BIOS.
The fact that your CPU is recognised by its make doesn't mean that its supported. The CPU ID is probably read by the BIOS, but the microcode of the CPU may be missing in the BIOS support. I am trying to think of possible reasons here, and these are just some of my current ideas as to why you may not be able to get into the BIOS.
Have you tried your MB outside the case yet, i.e. on a non conductive surface, i.e. wood or cardboard to eliminate any chances of a potential short?
Also, you may want to check your CPU seating again and carefully inspect the CPU socket pins to ensure that none were bent or are not making proper contact
Yep here is the serial number: 601-7821-050B1405415963
Yeah I didn't really expect to have too much luck with the original windows 7 installation but I had no choice since my last computer failed to power on (faulty PSU I suspected).
However, as you also mentioned, I do not think it would prevent me from reaching the BIOS setup.
Hopefully the above serial can make some sense for you but I do recall some sort of date after a CMOS reset at the top... I think it was 21 April or May 2014 or so. This was next to the following: E7821IMS v2.0.
Once I get home, I will try a few things like you suggested but trying to get as much info as I can before I get home so I have a few things to try.
Thanks again!
EDIT - as a side note, I also contacted the Online Retailer I got it from and the first response from them was that the DEBUG "A9" code meant it was the RAM not fully inserted. That is another thing I have to be 100% sure of but I am fairly sure it was fully clicked in on both sides... but you never know!

Audigy 2 OEM installation probl

Hi all,
Basically im here to moan and complain :P
Bought audigy 2 card from overlcockers.co.uk
installed into machine, machine recognised new audio control card, cant wait i think to myself whilst i enjoy 24 bit sound rather than crappy realtek 97 on board audio i using.
Now to get drivers, go to soundblaster.com click on auto update web finds i have the audigy 2 card installed and recomends the right set of drivers.
go to install them and get error message saying "Setup can not find the required set of components, etc etc", hmmmm i thought to myself.
Basically i've spent 2 days and roughly 0 hours trying to install drivers all to no succes for this card. Before any of you say try this try that, i have tried EVERYTHING.
Changed PCI slots, tried different drivers, reformated PC, etc etc. Everything some one has mentioned on a forum i have tried.
So i emailed creative, "Sorry sir, but you can not get this working without the original installtion CD, we have no working drivers for this card on the website, only updates"
Great, whats the friggin point of selling an OEM with no CD when you need the CD to get it working?
Im friggin pissed, if anyone can send me an iso of the cd (which i have found on the net but it downloads at 0k a second and its 566 meg big) can you email me at [email][email protected]][email protected][/url]
All the forums i've read about this loads of people have had the same problem, its something to do with OEM hardware not having a hardware identifier on it and therefore the web drivers wont recognise the card is installed.
This thread may get deleted im sure by someone at creative for me swearing in it, but seriously im so unhappy with creative and the audigy 2 oem card i have that i've just got to the point where i dont care,
VERY UNHAPPY CUSTOMER, i will be really happy if some one at creative does something for me so i can get the soundcard working.

Thanks guys for responding to my post,
Ive tried everything that you have mentioned and still have no success, the kx drivers dont seem to have the audigy 2 oem driver (which is the sb0400) and when i try to install the generic driver my machine crashed and reboots with a "windows has recovered from a serious error" message.
The guide of how to properly install the soundblaster drivers i've already tried to no avail just to find the same "Setup did not find the required set of hardware on your machine" error message.
Im now sitting in my mates bedroom with my PC set up (having a LAN :P), and tried his audigy oem installation CD and still i get the same error message (just to remind you i have the audigy 2 OEM card, hey it was worth a try)
Im now at the point where i cant get my hands on an audigy 2 OEM CD as the helpdesk from soundblaster has refered me to my "vendor" and its now the weekened and they arent open till monday.
To say im furious is a bit of an understatement as i now have to use my realtek 97 onboard sound and has ruined my LAN party.
Im now contemplating purchasing a retail card from PC World and putting the OEM card back in the box and taking it back to PCWorld for a refund LOL.
My advice, dont purchase an OEM card PERIOD.

Problem with solaris 10 08/11 installation on x86 workstation (DELL T5500)

Trying to install solaris 10 08/11 installation on x86 workstation (DELL T5500). Following error message was received after selecting the Oracle Solaris interactive Text (Desktop Session) installation method-
SunOS Release 5.10 Version Generic_147441-01 64-bit
Copyright (c) 1983, 2011, Oracle and/or its affiliates. All rights reserved.
Configuring devices.
SUNW-MSG-ID: SUNOS-8000-0G, TYPE: Error, VER: 1, SEVERITY: Major
EVENT-TIME: 0x5075a820.0x8f97a90 (0x1693e68979)
PLATFORM: i86pc, CSN: -, HOSTNAME:
SOURCE: SunOS, REV: 5.10 Generic_147441-01
DESC: Errors have been detected that require a reboot to ensure system
integrity. See http://www.sun.com/msg/SUNOS-8000-0G for more information.
AUTO-RESPONSE: Solaris will attempt to save and diagnose the error telemetry
IMPACT: The system will sync files, save a crash dump if needed, and reboot
REC-ACTION: Save the error summary below in case telemetry cannot be saved
panic[cpu0]/thread=fffffe80000b3c60: pcieb-7: PCI(-X) Express Fatal Error. (0x4)
fffffe80000b3bf0 pcieb:pcieb_intr_handler+1ea ()
fffffe80000b3c40 unix:av_dispatch_autovect+78 ()
fffffe80000b3c50 unix:intr_thread+5f ()
syncing file systems... done
ereport.io.pci.fabric ena=1693e6221600001 detector=[ version=0 scheme="dev"
device-path="/pci@19,0/pci8086,3410@9" ] bdf=2048 device_id=3410 vendor_id=
8086 rev_id=22 dev_type=40 pcie_off=90 pcix_off=0 aer_off=100 ecc_ver=0
pci_status=10 pci_command=47 pci_bdg_sec_status=0 pci_bdg_ctrl=3 pcie_status=6
pcie_command=7 pcie_dev_cap=8021 pcie_adv_ctl=5 pcie_ue_status=4020
pcie_ue_mask=100000 pcie_ue_sev=62030 pcie_ue_hdr0=0 pcie_ue_hdr1=0
pcie_ue_hdr2=0 pcie_ue_hdr3=0 pcie_ce_status=0 pcie_ce_mask=0
pcie_ue_tgt_trans=0 pcie_ue_tgt_addr=0 pcie_ue_tgt_bdf=ffff pcie_rp_status=0
pcie_rp_control=0 pcie_adv_rp_status=7c pcie_adv_rp_command=7
pcie_adv_rp_ce_src_id=2048 pcie_adv_rp_ue_src_id=2048 remainder=0 severity=44
skipping system dump - no dump device configured
rebooting...
Any ideas?

Sometimes, it's just easier and faster
to just start all over and re-install,
particularly when you have only a fresh install on your system.
This time, do not choose to include all the optional "documentation"
(that's what is held on CD5).
I have never found a reason to ever read that documentation so I stopped installing it.
... or you could download and burn a copy of CD5 and use it when prompted.

I have a Windows 2003 Server 64-Bit, and when I upgraded to Firefox 4.0.1 now it won't run, it keeps saying to restart to complete the installation, but I've restarted theserver 4 times, and I still can't use it.

I have a Windows 2003 Server 64-Bit, and when I upgraded to Firefox 4.0.1 now it won't run, it keeps saying to restart the computer to complete the installation, but I've restarted theserver 4 times, and I still can't use it.

I ended up putting it in DFU mode. It's kinda hard to tell it was in DFU mode because nothing showed on the screen, it was just black, but the sounds from the computer helped to tell me it was connected.
Itunes still didn't recognize the device for whatever reason.
So I used redsn0w. I don't know if I can say that on these forums, but considering itunes was worthless at this point I am going to give credit where credit is due.
Now I am giving itunes a second chance to upgrade to 5.1, if it doesn't work, well, back to redsnow and maybe I will even jailbreak it this time rather than just using the fecovery fix found under extras.

In my ipad mini sound is there but somehow display turned off....please help...how to turn on the display

In my ipad mini sound is there but somehow display turned off....please help...how to turn on the display

Frozen or unresponsive iPad
Resolve these most common issues:
    •    Display remains black or blank
    •    Touch screen not responding
    •    Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Home button not working or unresponsive, fix
http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
Fixing an iPad Home Button
http://tinyurl.com/om6rd6u
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
 Cheers, Tom

Need to Install Safari 6.0.2 on a white Intel core duo iMac. Had to throw out 6.0.3 because of conflict with required software. Downloaded wrong version that was for Mountain lion (I am running 10.7.5). It installs but won't open.

Need to Install Safari 6.0.2 on a white Intel core duo iMac. Had to throw out 6.0.3 because of conflict with required software. Downloaded wrong version that was for Mountain lion (I am running 10.7.5). It installs but won't open, says it is for Mountian Lion.
Of course I can't throw it away since I get a message it's part of the sytem. I can show package contents and throw those away, but evidently not a good idea!!

Need to Install Safari 6.0.2 on a white Intel core duo iMac. Had to throw out 6.0.3 because of conflict with required software. Downloaded wrong version that was for Mountain lion (I am running 10.7.5). It installs but won't open, says it is for Mountian Lion.
Of course I can't throw it away since I get a message it's part of the sytem. I can show package contents and throw those away, but evidently not a good idea!!

Updateable Report/Pagination - rows found but not displayed

Bear with me if there is a post that covers this, as the SEARCH facility seems to be hanging when I search on Pagination.
I have a SQL Query (PL/SQL Function Body Returning SQL Query) which creates an Updatable Report.
If I run the Query and the selection criteria results in more than one page in the "search results" and then I go to page 2 or page 3, etc and then peform another search that only results in 1 page of "search results", the actual search results will not display, but the pagination will show the number of rows that should be displaying.
For example, I search on Coroner "John Black", which returns 55 rows. The first 50 are displayed. The next 5 are on page 2. If I then searchon Coroner "Jim Bean", 22 rows are returned (all on page 1). If I then search on "John Black" again, and this time, go to page 2 (to see the final 5 rows in the result set) and then search on "Jim Bean", I won't get any data in the report for Jim Bean, but a message showing that there are 22 rows of data. However, I cannot get that data to show (even if I select NEXT or PREVIOUS for the pages.
Then if I go back and select on "John Black", get the same problem. I basically have to sign out completely in order to get this reset.
Note that the problem occurs if you are on a page greater than that of the result set on the next query. For example, if I am on page 3 of 5 pages and perform another selection that has 3 pages, it is fine. But if the result set only has 2 pages, the form becomes confused.
If the "Layout and Pagination" has a "Pagination Scheme" set to "Row Ranges X to Y of Z (no pagination)" I get an error like "Minimum row requested: 2401, rows found but not displayed: 46".
If I use "Row ranges 1-15 16-30 (with set pagination)" I get "1-46" as a hyperlink, which if I click on, will show me the report.
If I use "Row ranges 1-15 16-30 in select list (with pagination) I have a problem.
If I use "Row Ranges X to Y (no pagination) I have problems.
If I use "Row Ranges X to Y of Z (no pagination) I have problems.
If I use "Row Ranges X to Y of Z (with pagination) I have problems.
Basically, the one one that seems to work is those that have a hyperlink. Uing NEXT, PREVIOUS or a select list does not seem to work.
Do you know what is causing this problem?

I have the same issue, but cannot resolve it following above suggestions. I have a report page with search criteria and a "Go" button to submit the search. The branch back to the same page has "reset pagination for this page" checked, but still if run a query that returns just one row after having paged forwards, I get no rows displayed and a pagination link "1-1" that when clicked brings up the selected row.
I tried adding a "Reset Pagination" process to run on submit (unconditionally), and it made no difference.
I am using HTMLDB 2.0.

I can't install ADE on my PC, because as I try to open it a message of error appears to me: The application will be closed. I've already try with different browsers and also with the manual installation, but nothing..

I can't install ADE on my PC, because as I try to open it a message of error appears to me: The application will be closed. I've already try with different browsers and also with the manual installation, but nothing..

1
Close all iWork applications
2
Uninstall Keynote; this must be done with an application remover tool to delete the installation properly. Appcleaner is known to work correctly for this purpose, it is free and can be downloaded from here: Appcleaner Download
3
empty the trash
4
shutdown the Mac and restart. After the start up chime, hold down the shift key until the apple logo appears
let the Mac complete the start up procedure completely, it will take longer than usual as the hard drive is being repaired
5
Reinstall Keynote by logging into the Mac App Store using download / install

How do I use transparent=true in my Air app but still displaying swf ?

How do I use transparent=true in my Air app but still displaying swf's files ?
The thing is that I created a customized chrome, and looks nice when it is transparent cause seems to be floating, it works as a browser, but the problem is that when I navigate with it into a page wich contains embedded youtube videos, as in example, or any other swf file... it just doesn't show...
Any help ? thanks in advance,

Contact iTunes Support: http://www.apple.com/support/itunes/contact/

I have installed the agent 10 or 15 times and one installation hasfailed, no error appeared during the installation but I am havinginconsistent issues with my ethernet card not working here and there. Werebooted and can log into Novell client but th

I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
Windows xp sp3
ESM 3.5.154
Thanks,
Andy

If you are searching the registry, check for the "Senforce" string. It should be at HKLM\Software\Senforce
Try running the install program for the ZSC with the following command line:
setup.exe /V"STUNINSTALL=1"
If you've specified an uninstall password, try this one instead:
setup.exe /V"STUNINSTALL=1 STUIP=password"" (please note the double quote at the end)
Let me know if that helped you.
Daniel
>>>
From: Andy_DeWees<[email protected] du>
To:novell.support.zenworks.endpoint-security-management
Date: 2/5/2009 12:52 PM
Subject: I have installed the agent 10 or 15 times and one installation hasfailed, no error appeared during the installation but I am havinginconsistent issues with my ethernet card not working here and there. Werebooted and can log into Novell client but the login prompt did not appearfor ESM client or the icon was not in the systray. Everything seems towork, besides at times (a couple times today) it terminates his ethernetcard/connection. I would re-image his computer but he has severalapplications and
I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
Windows xp sp3
ESM 3.5.154
Thanks,
Andy

Solaris 10.2 OEM Installation: but emctl displays OMS version is 10.1

Similar Messages

Maybe you are looking for