Solaris 10 / Sparc: Last Unsuccessful Login

Hi guys,
I would like to know if there is a way to configure my "Solaris 10 / Sparc" system in order that, after a user login on the system, the console displays a message containing the Last Successful Login date and the number of failed login the same user attempts since last login successfully carried out . I hope I've been clear even if the requirement is a bit contorted.
It would be enough for me just know who is the program that produce the message "Last Login: ..." (eg, "Last Login: Mon Jul 6 10:03:59 from 10.173.123.34") in order that I can try to do the same thing with the number of unsuccessful login.
The message "Last Login: ..." is already printed on my Sistem. So I don't need to configure this: I only need to know how to print the number of failed login the same user attempts since last login successfully carried out.
I did some research online and almost all advise to put in "/etc /profile" the following lines:
echo "Login Successful LAST: $ (last-R $ LOGNAME | head -1)"
echo "Login Unsuccessful LAST: $ (lastb-R $ LOGNAME | head -1)"
The problem is that on my machine I can not find the command lastb. I can find Only the "last" command.
Thank you

lastb is a Linux program, also available on HP-UX but not Solaris.
For Solaris you use the loginlog file - create a file in /var/adm - touch /var/adm/loginlog. Make it read and write only for the owner, which is root, and in group sys. Any failed logins at the command line login will show up in /var/adm/loginlog. Failures at the GUI login will not, these show up in /var/adm/messages. The only place I can see to get the last login information at the GUI would be from the /.dt/startlog.old in the user's home directory or /var/adm/messages.

Similar Messages

  • Locking user account for 3 unsuccessful logins using JOSSO

    How the an user account can be locked after 3 unsuccessful logins in Java Open Single Sign On ?
    Please provide me a solution. Thanks in advance.

    We ran into that ourselves, courtesy of our <SARCASM>friends</SARCASM> Sarbanes and Oxley. Based on our research and statements from Sun engineers, the only ways to do it in Solaris 9 are:
    * Write a PAM module to do it
    * Log all failed attempts to a file and have a process scan it for successive login failures
    * Go to something like Directory Server (LDAP) which has account lockouts built into it
    We decided to go with the last option - and yours truly was responsible for doing everything. Two months of hell, but it's done and much easier to manage than files or NIS.

  • SAP 7.0 on SUN Cluster 3.2 (Solaris 10 / SPARC)

    Dear All;
    i'm installing a two nodes cluster (SUN Cluster 3.2 / Solaris 10 / SPARC), for a HA SAP 7.0 / Oracle 10g DataBase
    SAP and Oracle softwares were successfully installed and i could successfully cluster the Oracle DB and it is tested and working fine.
    for the SAP i did the following configurations
    # clresource create -g sap-ci-res-grp -t SUNW.sap_ci_v2 -p SAPSID=PRD -p Ci_instance_id=01 -p Ci_services_string=SCS -p Ci_startup_script=startsap_01 -p Ci_shutdown_script=stopsap_01 -p resource_dependencies=sap-hastp-rs,ora-db-res sap-ci-scs-res
    # clresource create -g sap-ci-res-grp -t SUNW.sap_ci_v2 -p SAPSID=PRD -p Ci_instance_id=00 -p Ci_services_string=ASCS -p Ci_startup_script=startsap_00 -p Ci_shutdown_script=stopsap_00 -p resource_dependencies=sap-hastp-rs,or-db-res sap-ci-Ascs-res
    and when trying to bring the sap-ci-res-grp online # clresourcegroup online -M sap-ci-res-grp
    it executes the startsap scripts successfully as following
    Sun Microsystems Inc.     SunOS 5.10     Generic     January 2005
    stty: : No such device or address
    stty: : No such device or address
    Starting SAP-Collector Daemon
    11:04:57 04.06.2008 LOG: Effective User Id is root
    Starting SAP-Collector Daemon
    11:04:57 04.06.2008 LOG: Effective User Id is root
    * This is Saposcol Version COLL 20.94 700 - V3.72 64Bit
    * Usage: saposcol -l: Start OS Collector
    * saposcol -k: Stop OS Collector
    * saposcol -d: OS Collector Dialog Mode
    * saposcol -s: OS Collector Status
    * Starting collector (create new process)
    * This is Saposcol Version COLL 20.94 700 - V3.72 64Bit
    * Usage: saposcol -l: Start OS Collector
    * saposcol -k: Stop OS Collector
    * saposcol -d: OS Collector Dialog Mode
    * saposcol -s: OS Collector Status
    * Starting collector (create new process)
    saposcol on host eccprd01 started
    Starting SAP Instance ASCS00
    Startup-Log is written to /export/home/prdadm/startsap_ASCS00.log
    saposcol on host eccprd01 started
    Running /usr/sap/PRD/SYS/exe/run/startj2eedb
    Trying to start PRD database ...
    Log file: /export/home/prdadm/startdb.log
    Instance Service on host eccprd01 started
    Jun 4 11:05:01 eccprd01 SAPPRD_00[26054]: Unable to open trace file sapstartsrv.log. (Error 11 Resource temporarily unavailable) [ntservsserver.cpp 1863]
    /usr/sap/PRD/SYS/exe/run/startj2eedb completed successfully
    Starting SAP Instance SCS01
    Startup-Log is written to /export/home/prdadm/startsap_SCS01.log
    Instance Service on host eccprd01 started
    Jun 4 11:05:02 eccprd01 SAPPRD_01[26111]: Unable to open trace file sapstartsrv.log. (Error 11 Resource temporarily unavailable) [ntservsserver.cpp 1863]
    Instance on host eccprd01 started
    Instance on host eccprd01 started
    and the it repeats the following warnings on the /var/adm/messages till it fails to the other node
    Jun 4 12:26:22 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:26:25 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:26:25 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:26:28 eccprd01 last message repeated 1 time
    Jun 4 12:26:28 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:26:31 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:26:31 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:26:34 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:26:34 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:26:37 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:26:37 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:26:40 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:26:40 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:26:43 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:26:43 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:26:46 eccprd01 last message repeated 1 time
    Jun 4 12:26:46 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:26:49 eccprd01 last message repeated 1 time
    Jun 4 12:26:49 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:26:52 eccprd01 last message repeated 1 time
    Jun 4 12:26:52 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:26:55 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:26:55 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:26:58 eccprd01 last message repeated 1 time
    Jun 4 12:26:58 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:27:01 eccprd01 last message repeated 1 time
    Jun 4 12:27:01 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:27:04 eccprd01 last message repeated 1 time
    Jun 4 12:27:04 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:27:07 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:27:07 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:27:10 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:27:10 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:27:13 eccprd01 last message repeated 1 time
    Jun 4 12:27:13 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:27:16 eccprd01 last message repeated 1 time
    Jun 4 12:27:16 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:27:19 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:27:19 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:27:22 eccprd01 last message repeated 1 time
    Jun 4 12:27:22 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:27:25 eccprd01 last message repeated 1 time
    Jun 4 12:27:25 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:27:28 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:27:28 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:27:31 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:27:31 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:27:34 eccprd01 last message repeated 1 time
    Jun 4 12:27:34 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:27:37 eccprd01 last message repeated 1 time
    Jun 4 12:27:37 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:27:40 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:27:40 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:27:43 eccprd01 last message repeated 1 time
    Jun 4 12:27:43 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:27:46 eccprd01 last message repeated 1 time
    Jun 4 12:27:46 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dis
    can anyone one help me if there is any error on configurations or what is the cause of this problem.....thanks in advance
    ARSSES

    Hi all.
    I am having a similar issue with a Sun Cluster 3.2 and SAP 7.0
    Scenrio:
    Central Instance (not incluster) : Started on one node
    Dialog Instance (not in cluster): Started on the other node
    When I create the resource for SUNW.sap_as like
    clrs create --g sap-rg -t SUNW.sap_as .....etc etc
    in the /var/adm/messages I got lots of WAITING FOR DISPACHER TO COME UP....
    Then after timeout it gives up.
    Any clue? What does is try to connect or waiting for? I hve notest that it's something before the startup script....
    TIA

  • How can I install new versions of Fifefox on Solaris 9 Sparc?

    I use Firefox 2.0.0.20 on Solaris 9 Sparc, but I couldn't install any verions of Firefox major version 3.
    There is a great site, http://www.sunfreeware.com/mozilla.html, that looks it has a possibles version compatibles whit my OS, but the links don`t work.
    Any suggestions?
    More detail about my OS:
    Solaris 9 9/05 HW s9s_u9wos_06b SPARC
    Copyright 2006 Sun Microsystems, Inc. All Rights Reserved.
    se is subject to license terms.
    Assembled 25 September 2006

    Hi,
    Please also see [http://unixpackages.com/packages/mozilla this] (from http://www.sunfreeware.com/). It looks like 2.0.0.23 is the last supported version for Solaris 9.

  • Install newest JRE on Solaris 9 Sparc (64-bit)

    Note: This message has also been posted on the JRE forum. This is the second attempt to post it here.
    I would like to know the best method to replace the JRE that is installed with a Solaris 9 (SPARC) installation. A clean installation of Solaris 9 comes with JRE 1.4 and I would prefer 1.4.1 (64-bit) or newer. Sun provides self-extracting archive downloads of the latest JREs for Solaris, but I have been unsuccessful in using these. I followed the instructions at:
    http://java.sun.com/j2se/1.4.2/install-solaris.html
    for doing a self-extracting installation, but this does not replace the contents of /usr/j2se with the new JRE. Additionally a pkginfo still points to the old JRE. I also read the instructions at:
    http://java.sun.com/j2se/1.4.2/install-solaris-64.html
    which stated I should install the 32-bit version, and then the 64-bit version. Finally, both set of instructions mention installation from packages, yet I am unable to find the packages to download. What is the best method to remove the JRE from a Solaris installation and install a newer version of the JRE so the pkginfo is updated and the new JRE resides in /usr/j2se? Any assistance is appreciated.

    I found by issue "mount -v" that our disk slices are
    UFS type. So we don't need apply patch 5257399,
    right? Please confirm. Thanks!!!For your information, you are asking the user community to confirm, not Oracle. Some (many?) of us are not employed by Oracle.
    Therefore, the only answers you can get are from 'friends'. Nothing would be official and Oracle (and Oracle Support) would not be legally responsible.
    Your safest bet would be to escalate the request wityh Oracle Support.

  • How to monitor unsuccessful logins

    Hello,
    I like to know which logs would contain the unsuccessful logins to the dartabase. For example, when a front end user said of the last 10 times he logs in, only 6 times was successful but the other 4 he could not. Is there a log I can take a look and see when there was an unsuccessful log in? Thank you.

    902029 wrote:
    Hello,
    I like to know which logs would contain the unsuccessful logins to the dartabase. For example, when a front end user said of the last 10 times he logs in, only 6 times was successful but the other 4 he could not. Is there a log I can take a look and see when there was an unsuccessful log in? Thank you.after you
    AUDIT CREATE SESSION
    you'll be able to do as you as you desire

  • UFS filesystem limit on solaris 10 - sparc

    Hi All,
    I have one question in regards with soalris UFS file system on Sun Solaris 10 Sparc.
    currently i have one mount point with 1.5 TB of space with UFS filesystem connected to EMC SAN, now i am going to add one metalun of 1 more TB and exapnd it on SAN.
    In regards with this i have some concerns:
    1) Will UFS support 2.5 TB on a single slice?
    2) Simply growfs command will work or do we need to perform additional steps?
    Steps :
    --> bkp data and umount the filesystem
    --> run devfsadm
    --> use growfs command
    --> mount partition again
    Any suggestions in this regards are really appreciated.
    Thanks in advance.

    user12143664 wrote:
    Hi,
    Many thanks for input.
    May i know how can i start scsci auto detect in format?
    Lun detected with new capacity but not displaying in partition table even after labeling the disk.
    11. emcpower1a <DGC-RAID 5-0429-2.44TB>
    /pseudo/emcp@1Current situation:
    Part      Tag    Flag     First Sector          Size          Last Sector
    0        usr    wm                34         1.46TB           3145711582
    1 unassigned    wm                 0            0                0
    2 unassigned    wm                 0            0                0
    3 unassigned    wm                 0            0                0
    4 unassigned    wm                 0            0                0
    5 unassigned    wm                 0            0                0
    6 unassigned    wm                 0            0                0
    8   reserved    wm        3145711583         8.00MB           3145727966I tried zero VTOC its not working as slice 2 wa already zero.
    Need help.
    Thanks in advance.FWIW, that's an EFI label. Above a certain size, "standard" Solaris disk labels don't work, so EFI labels are required. Is that the same as the VTOC that was available before you enlarged the LUN. IIRC that limit might be 2 TB.
    Since you refer to slice 2, I am assuming here the old label may not have been an EFI label. Also, EFI labels do not support overlapping slices, so the old Solaris convention of slice 2 being the entire disk no longer applies.

  • How to install a single 2Gb FC adapter with Solaris 10 SPARC ?.

    Hi All,
    I have the Sun Box runing Solaris 10 SPARC, i tried to install PCI single 2Gb FC adapter on this Server in order to connect to Sun Storage FC. At Ok prompt, i tried to run show-devs and looked the path /pci@1e,600000/SUNW,qlc@2 and supposed that physical installation for this adapter is ok.
    But i don't know whether Solaris 10 SPARC included the required drivers for this adapter already or not. Pls show me how to get correct drivers for this adapter and how to test to look if it's working properly under Solaris 10 SPARC ?.
    Thanks
    Scott

    Yes, it's part#X6767A supported for entry SPARC Sun Fire server Line.
    I tried to seach drivers via qlogic.com and it leads me to the sunsolve.com for the download but the download is required to login with a service plan from Sun. So sun wanted to charge for these patches/drivers.
    Do you know which site/link is free for Sun drivers in gerneral ?.
    Thanks
    Scott

  • Forms 10g - Solaris 10 Sparc and Mozilla 1.7 - Error Applicatio/x-java-appl

    This page contains information of a type ( Applicatio/x-java-applet-version=1.4.2_06) that can be viewed with the appropriate plug-in
    I have an application running and on windows and its is working fine with IE. but when i try to run the application of sun solaris 10 sparc machine with Mozilla 1.7 i get this error.
    What can be the reason and if any body has solved this issue ? please guide me .
    URGENT

    I wouldn't say you made a "mistake". It might be a custom build, but Firefox never had a 1.7 version; skipped from 1.5 to 2.0 in release version numbering.
    The old Mozilla Application Suite had 1.7 as its' last version produced; ended with 1.7.13 in April 2006. That's why I equate "Mozilla web browser (1.7)" with the old Mozilla Suite and not with Firefox.
    http://en.wikipedia.org/wiki/Mozilla_Application_Suite
    Whatever the case, no one should be using a web browser that was produced back in 2006 on the internet in 2014. If that is used completely on an internal intranet, you shouldn't have a problem; beyond finding support for an old version like that.
    http://www.seamonkey-project.org/community

  • Locking a user after unsuccessful login attempts?!

    Does anybody know how to automatically lock a user after a given number of unsuccessful login attempts?
    I noticed that solaris does not offer any security feature concerning this item, although it is a good opportunity for hackers to scan a solaris machine.
    Please let me know
    Thanx in advance

    Hi,
    The Trusted Solaris version supports this feature. You can find the detail about configuring the same at http://docs.sun.com under Trusted Solaris 8 and Administration Procedures.
    The same can also be achieved by using Pluggable Authentication Modules(PAM) which has been incorporated since Solaris 2.6. For more info on PAM check out www.sun.com/solaris/pam. There some white papers and admin guide .Also refer to man pages on pam.conf ,pam and pam_unix.
    Regards
    Anshul

  • Unsuccessful logins to Oracle Applications

    Last Saturday the user received the following email regarding an login attempt through his username to oracle applications:
    Dear JOSE DIAS,
    There were 3 unsuccessful login attempts using your account JDIAS yesterday.
    If this not you attempting to log into the account, please notify the oracle helpdesk immediately to address this issue.
    Do we have a means to get the IP of the user that attempted the below?

    user503988 wrote:
    Last Saturday the user received the following email regarding an login attempt through his username to oracle applications:
    Dear JOSE DIAS,
    There were 3 unsuccessful login attempts using your account JDIAS yesterday.
    If this not you attempting to log into the account, please notify the oracle helpdesk immediately to address this issue.
    Do we have a means to get the IP of the user that attempted the below?Please see old threads.
    https://forums.oracle.com/forums/search.jspa?threadID=&q=Audit+AND+IP&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    https://forums.oracle.com/forums/search.jspa?threadID=&q=IP+AND+Address+AND+Audit&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    Thanks,
    Hussein

  • Problem with installation application server 10g on Solaris 10 sparc

    Hello all.
    Help me, please.
    I'm trying to install Oracle aplication server 10.0.1.2.0.2 on Solaris 10 sparc.
    Server - Sun Fire v210.
    When i install oracle infrastructure(metadata repository and identify management),
    i have a problem - on first step of configuration "end of communication channel".
    Failed
    Anybody know, how solve this problem?
    Sorry for my english.

    There is known bug in installing Oracle10gAS infra. You have to apply the following note during the installation.
    see MetaLink Note:330016.1 for current AS 10.1.2 installation requirements for Solaris 10.
    Regards,
    Amir

  • Oracle 10g R2 installation on sun solaris 10 Sparc machine

    Hi there,
    I encountered the following problem during oracle 10g R2 installation on sun solaris 10 Sparc machine
    Error encountered:
    Using paramFile: /u01/Oracle/10gr2_db_sol/install/oraparam.ini
    Checking installer requirements...
    Checking operating system version: must be 5.8, 5.9 or 5.10. Actual 5.10
    Passed
    Checking Temp space: must be greater than 250 MB. Actual 2266 MB Passed
    Checking swap space: must be greater than 500 MB. Actual 2335 MB Passed
    Checking monitor: must be configured to display at least 256 colors Failed <<<<
    >>> Could not execute auto check for display colors using command /usr/openwin/bin/xdpyinfo. Check if the DISPLAY variable is set.
    Some requirement checks failed. You must fulfill these requirements before
    continuing with the installation,at which time they will be rechecked.
    Continue? (y/n) [n]
    The following were the steps taken before encountering the above error
    1. logged into a workstation
    2. From its xterm terminal I logged to the oracle server via ssh oracle@ip
    3. keyed in the following at the command prompt
    DISPLAY=machine_name:0.0; export DISPLAY
    4. executed the following from the command prompt
    ./runInstaller
    Note: when executing the ./runInstaller, the preinstallation checking just hangs at Checking monitor: must be configured to display at least 256 colors. But the log file shows it failed during preinstallation checking as shown in Error encountered
    Please help me with this problem.
    Thank you
    Ravindran Kanniah

    It is because of UNIX shell. I also faced this error during installation.
    First check your shell by the following command.
    $ echo $SHELL
    Then select the below.
    For csh shell
    $ setenv DISPLAY 192.168.1.128:0.0
    $ export DISPLAY
    For sh,ksh and bash
    $ DISPLAY=192.168.1.128:0.0
    $ export DISPLAY
    After you do this check the value of DISPLAY variable.
    $ echo $DISPLAY
    If the DISPLAY variable is set then run ./runInstaller.
    One advice: Keep a complete log of your terminal session. This will help you in future :)
    -aijaz

  • Weblogic 10.3.0 on Solaris 10 Sparc

    Hello,
    Need Help!!!!
    I have installed WL 10.3.0 on Solaris 10 Sparc 64bits and i have this Error:
    <May 31, 2010 6:51:56 PM WEST> <Warning> <Socket> <BEA-000444> <Could not load the performance pack that can take advantage of /dev/(e
    )poll device due to:
    java.lang.NegativeArraySizeException.
    Will attempt to use the performance pack that does not depend on /dev/(e)poll device.>
    # A fatal error has been detected by the Java Runtime Environment:
    # SIGSEGV (0xb) at pc=0xffffffff08b04e68, pid=5539, tid=74
    # JRE version: 6.0_20-b02
    # Java VM: Java HotSpot(TM) 64-Bit Server VM (16.3-b01 mixed mode solaris-sparc )
    # Problematic frame:
    # C [libmuxer.so+0x4e68]
    # An error report file with more information is saved as:
    # /app/weblogic/domains/smpftth/hs_err_pid5539.log
    # If you would like to submit a bug report, please visit:
    # http://java.sun.com/webapps/bugreport/crash.jsp
    # The crash happened outside the Java Virtual Machine in native code.
    # See problematic frame for where to report the bug.
    Does any one knows how to help me?

    Here is the text from the download site from 10.3.3 that applies to 10.3.0 as well:
    Note: This table includes links to WebLogic Server installers that include 32-bit JVMs for the platform
    in question, and links to WebLogic Server generic installers that can be used on any supported platform.
    To use WebLogic Server with 64-bit JVM's on Linux and Solaris or to use WLS on other supported
    platforms, use the WebLogic Server generic installer listed under "Additional Platforms". The generic
    installers do not include a JVM/JDK. For instructions on using the generic installers, see this document.
    So regardless whether the OS is 64bit or not, you need to select the installer on whether you are running WebLogic Server in a 32bit JVM or a 64bit JVM. If you run in a 32bit JVM, you can use the 32bit binary installer for Solaris that has a .bin extension. If you are going to run a 64bit JVM, then you need to download the "generic" .jar installer and separately download the supported 64bit JDK and follow the instructions similar to this, but for 10.3.0.
    http://download.oracle.com/docs/cd/E14571_01/doc.1111/e14142/guimode.htm#BABGFAAF
    On edelivery.oracle.com, select Oracle Fusion Middleware, then Oracle® Application Server 10g Release 3 (10.1.3) Media Pack for Oracle Solaris on SPARC (64-bit)
    32bit native Solaris installer for 10.3.0 is Part Number V13618-01
    64bit generic installer for 10.3.0 is Part Number V13672-01

  • How I can emulate Solaris 10 sparc on a Virtual Machine?

    Hi for all.
    Guys, I need to emulate an environment Solaris 10 in my job. We have an application that just run in this kind of environment. But, I found some problems when I try to install Solaris 10 Sparc on Virtual Box. I think that the problem is the type of architecture that are differents.
    So, someone knows a way to emulate Solaris 10 sparc architecture on a Virtual Machine. Doesn't matter the Virtual Machine application (Virtual Box, VMWare, etc..). Somebody Help me?

    HI Srini_Chavali
    I'm using the Solaris 10 u11.
    In fact, Virtual Box supports Solaris u6 and higher. I have an installation of Virtual Box running Solaris x86. But, the problem occurs when I try to create a Virtual machine to work with Solaris 10 Sparc architecture.
    The errors that appears on the screen are:
    "No bootable medium found! System Halted" and "FATAL: Could not read from the boot medium! System halted"
    This error occurs just with Architecture sparc.

Maybe you are looking for

  • Can not connect to internet using bluetooth connection with Nokia N95

    Hello! I'm trying to connect to internet using my Nokia N95 as a modem and connecting my Macbook Pro and Nokia using bluetooth connection. Mac says me "Can not connet to PPP server..." When i connect using usb cable connection between Nokia and Mac -

  • Late 2011 Macbook Pro green pixels on the screen where dark colors should appear.

    I have a late 2011 Macbook Pro I bought it new with 4 gb of ram. About 4 months ago i purchased 8 gb of pny ram for this model and upgraded the ram. I followed all of the safety precautions and discharged my static electricity before upgrading. It in

  • Best Practice for UPK implementation

    We will start using UPK tool in our Oracle E-Business Suite (11.5.10) environment soon. We are in a process of configuring the tool and making a standard template for training documents. For example, which screen resolution? which font size and color

  • Raw material inventory report

    Hi SAP GURUS, 1) Is there any standard Raw Material Inventory report that shows value by inventory type (scrap, alloys, principal supplies,  spare parts and minor supplies, WIP, finished goods, graphite, and the reserves for those material types 2) A

  • SAP Query - material costs split by labour/ingredients

    Hi, Is it possible to create a SAP query to show the following; Material / Lab unit cost / Material lab cost I'd also like to be able to select r show 1 or 2 cost variants. I essentially need a list of materials and their costs broken down into their