Solaris8 Intel able to recognize 7GB out of 40GB

Installed Solaris 8 (Intel) on HP Pavilion 9600 system with 384 MB RAM
and 40GB IDE Hard disk drive. Install program was able to recognize only
6.5GB. My BIOS configuration shows LBA Mode(I tried CHS also).
I installed Solaris 8 and it is working fine with 6.5GB.
LINUX 6.1 was able to recognize all 40GB. Am I doing anything wrong?
I would like to use atleast 20GB for Solaris8 and remaining 20GB for FAT32.
Any suggestions? Thank You in advance.
Mohan Anney

Ok, I got it to work I think, with help from the workaround for
solaris 7 at http://sun.drydog.com/faq/ (question 5.8)
I looked at the western digital web site and found the drive has
87,930,864 sectors. You have to define the geometry as if it
had 16383 cylinders. 87,930,864 / 16383 = 5367 sectors/cylinder.
<pre>
I made a geometry file called 'geometry':
* Label geometry for device /dev/rdsk/c0d0p0
* PCYL NCYL ACYL BCYL NHEAD NSECT SECSIZ
16383 16383 2 0 1 5367 512
# fdisk -S geometry -I /dev/rdsk/c0d0p0
# format
(choose drive, set up partitions, etc)
# newfs /dev/rdsk/c0d0s7
</pre>
etc...
it seemed to work. Note I'm not using this as a boot drive,
just as a secondary drive so booting off the disk wasn't tested.
I also updated the bios on my abit BP6 motherboard because they
had changes for disks > 32gb, but maybe that doesn't matter if
you're not booting off the drive.
hope this helps. Maybe you can post here if it does or doesn't.

Similar Messages

Oracle 9i for Solaris8 (Intel)

Hi,
Has anyone successfully installed Oracle 9i on Solaris8 (Intel) ?. Pl. post your experience.
Thanks

I recall reading a post somewhere abt that particular user being able to install "9i for Sun Sparc" on solaris-intel without any problem. I was interested in finding out if i should give it a shot myself and if there is anything to watch out for.
I have installed "8.1.7 for Sparc" on sol-intel with no problem.

I am trying to find graphic drivers so I can watch 'Netflix' on my "WINDOWS 8" operating system. They lead me to you. R u able to help me out?

Hi...
I am not really sure why "netflix" lead me to you at Apple unless my Iphone being plugged into my compt. had something to do with it?
But here is the problem:
I turned on one of 'netflix' movies, it took awhile and the following messege popped up:
*Not supported by Visual Machine.
New Graphics Drivers May Be Required.
Graphic Card Manufacturer: check with them.................which i did go to their web site and they were NO Help at all! ( i have a view sonic monitor, VG930m) they couldn't even find it...
The second paragraph read like this:
For Windows 8
Basic Display Adapter
Apple Boot Camp
Graphics Driver
The error code was at the bottom and read as follows:
W8156-C0262500
I am stumped,, I've worked on this for almost a week, and I'm getting no where... If anyone is able to help me out on this I would be ever so grateful as my mother who is 84 yrs old had a third massive stroke. I was trying to get this set up for her so she would be able to watch movies with me in the bedroom. Thanks in advance for taking the time to read this.... deb...

http://portableapps.com/apps/internet/firefox_portable/localization#legacy36

I am all of a sudden not able to send emails out from my outlook account on my iPhone. Any suggestions?

I am not able to send emails out from my outlook account on my iPhone 4s. This feature has been working fine for 2 years and all of a sudden decided not to work. I was able to receive emails but not send out. I tried deleting the outlook account and recreating it but now I can't even recreate it. It tells me it cannot verify my account information. The interesting thing is that the account works fine on my PC, so I know my login info is correct. Any help would be appreciated.
Thanks

Hello tmed32
Check the website and log into webmail to see if there is anything you need to add to authorize it on other devices. Also check out the articles below to see if they can provide any further assistance.
iOS: Setting up an Outlook.com, Hotmail, Live, or MSN email account
http://support.apple.com/kb/ht1694
iOS: Troubleshooting Mail
http://support.apple.com/kb/TS3899
Regards,
-Norm G.

After installing an update I am no longer able to hear sound out of my speakers. A red light comes on where the headphone jack is. I have already attempted to trip to switch with a wooden toothpick in the headphone jack but have not had luck.

after installing an update I am no longer able to hear sound out of my speakers. A red light comes on where the headphone jack is. I have already attempted to trip to switch with a wooden toothpick in the headphone jack but have not had luck.

Have you gone into system prefs nad made sure that the headphone port is set to audio out. And not audio in.
Also make sure that you are selecting built in speakers for your audio output.
If that does not fix it try doing a Pram reset.
Shut your mac down.
Press the startup button.
Hold down the following keys. Command Option P and R. Wait till you hear the chime 2 times. Then let go. See if that fixes it.

How much Ram iphone 4s have??i search alot on apple site but cant able to find it out...

how much Ram iphone 4s have??i search alot on apple site but cant able to find it out...
in some other sites it is written 512MB or 1GB...whats the exact truth...

512MB

HT1454 will the new iphone 5 be able to play video out?

Hi
Can any one tell me if the iphone 5 will be able to play video out as the older ones do? I have my 4s plugged into my Alpine system in my car to watch and play all music and movies?

AFAIK, only wireless Video out for iPhone 5.

Not able to recognize any video/audio devices using jmf and java soun

Hi ,
I need one help from your side.
Here I am expecting some clarifications from you. Before that let you my environement.
My working environment :
Eclipse tool and added jmf jar to my project I did not do any thing more.
If any thing I need to do just let me know. My target platform is MAC & UBUNTU.
Please bare with my questions.
1) I am not able to recognize any video/audio devices using jmf and java sound APIs on My system.
( I checked with the app mentioned in the http://www.java-forums.org/new-java/11201-jmf-cannot-connect-device.html )
Do we need any administrives rights for our working PC.
What is the procedure/ setup I need to follow from a java application to enable particular audio/video device since I dont about end-user system setup right.
If possible send some sample code to recognize /r detect audio device ( voice input ). It should run on both MAC and UBUNTU.
2) I run the one sample audio recording application of this link (http://www.jsresources.org/examples/SimpleAudioRecorder.java.html) which is provided by YOU.
I got output audio file and able to hear voice on UBUNTU system but not able to hear voice on MAC system.
I heared that default line in ( audio setup of the sys) is wont take any voice data on MAC.Why I made this stmt means we are getting false when using isSupported methods of JAVA SOUND API.
( like for TragetdataLine ...i,e, all ports are getting false)
I have one sample audio recording app implemented by QUICKTIME API. In this case also he taking audio ftom device only using quicetime API.
With that we are able to record and hear audio ( voice input --> not line in , external device we added some thing like SSB...)
3) In case of Video capturing DataSource, Streams are implemented by PullBufferDataSource , PullBufferStream intefaces used.
In case of Audio capturing DataSource, Streams are implemented by PushBufferDataSource, PushBufferStream intefaces used.
Can you explain the reasons ? I gone through API but i am not clear.
HOPE I WILL BE CLARIFIED EVERY THING FROM YOU.
Thanks
RamaRao.G

Hi ,
I need one help from your side.
Here I am expecting some clarifications from you. Before that let you my environement.
My working environment :
Eclipse tool and added jmf jar to my project I did not do any thing more.
If any thing I need to do just let me know. My target platform is MAC & UBUNTU.
Please bare with my questions.
1) I am not able to recognize any video/audio devices using jmf and java sound APIs on My system.
( I checked with the app mentioned in the http://www.java-forums.org/new-java/11201-jmf-cannot-connect-device.html )
Do we need any administrives rights for our working PC.
What is the procedure/ setup I need to follow from a java application to enable particular audio/video device since I dont about end-user system setup right.
If possible send some sample code to recognize /r detect audio device ( voice input ). It should run on both MAC and UBUNTU.
2) I run the one sample audio recording application of this link (http://www.jsresources.org/examples/SimpleAudioRecorder.java.html) which is provided by YOU.
I got output audio file and able to hear voice on UBUNTU system but not able to hear voice on MAC system.
I heared that default line in ( audio setup of the sys) is wont take any voice data on MAC.Why I made this stmt means we are getting false when using isSupported methods of JAVA SOUND API.
( like for TragetdataLine ...i,e, all ports are getting false)
I have one sample audio recording app implemented by QUICKTIME API. In this case also he taking audio ftom device only using quicetime API.
With that we are able to record and hear audio ( voice input --> not line in , external device we added some thing like SSB...)
3) In case of Video capturing DataSource, Streams are implemented by PullBufferDataSource , PullBufferStream intefaces used.
In case of Audio capturing DataSource, Streams are implemented by PushBufferDataSource, PushBufferStream intefaces used.
Can you explain the reasons ? I gone through API but i am not clear.
HOPE I WILL BE CLARIFIED EVERY THING FROM YOU.
Thanks
RamaRao.G

TS1538 My iTunes, after a short time, decides not to be able to recognize my devices, the only thing that fixes it is a re-install of itunes. it is getting irritating as this will be the 7th time i have had to do it. Any solutions?

My iTunes, after a short time, decides not to be able to recognize my devices, the only thing that fixes it is a re-install of itunes. it is getting irritating as this will be the 7th time i have had to do it. Any solutions?

The info that was on the old iPhone can only be retreived either by restoring from iCloud/iTunes back up or syncing from iCloud. You need to chek these places and if nothing is there then I'm sorry that data is gone and you will only have the back ups you see.
But check iTunes back ups:
Windows
Edit>Preferences>devices
Mac
iTunes>Preferences>devices

Hello am dominic and i want a help from you guys out there i hope you will be able to help me out...i have an i phone which i bought from a friend but it has this i cloud account i wanna know if you can help me wipe it so i can usse it..thanks

hello am dominic and i want a help from you guys out there i hope you will be able to help me out...i have an i phone which i bought from a friend but it has this i cloud account i wanna know if you can help me wipe it so i can usse it..thanks

Only your friend can unlock it, either by giving you his Apple ID and password, or by removing it from his list of devices - please see:
http://support.apple.com/kb/TS4515
There is no way at all it can be unlocked without his doing this.

You used to be able to shuffle a playlist and see the order in which the songs would sync into your iPod. I haven't been able to figure that out. Can anyone help me?

You used to be able to shuffle a playlist and see the order in which the songs would sync into your iPod. I haven't been able to figure that out. Can anyone help me?

With your playlist in "List view", click on the header over the column of numbers all the way to the left. This will then reveal the true playback (and sync) order.
However, the sort order in iTunes may not agree with the sort order on your device, but that is a separate issue and seems to have too many variables to go into here.

Why does my IPhone 4 tell me that it can't back up onto icloud as it has run out of storage space, but when i look at iCloud storage it tells me I have 4.7GB out of 5GB available?

Why does my I-Phone 4 tell me that it can't back up onto i-Cloud as it has run out of storage space, but when I look at i-Cloud storage it tells me I have 4.7GB out of 5GB available?

Welcome to the Apple Community.
Have you checked how much space the backup will need.

HT204368 I accidentally clicked Forget Device in bluetooth on my iPad and I cannot figure how to undo that. Is there any way to be able to recognize the device again?

I accidentally clicked Forget Device in bluetooth on my iPad and I cannot figure how to undo that. Is there any way to be able to recognize the device again?

Put the device back into discovery mode and the iPad will see it again. Make sure the Bluetooth is ON in Settings and look at the devices seen.

WLS5.1 apache plugin for Solaris8 Intel

Is there WLS5.1 apache plugin for Solaris8 Intel platform?

Which platform? WebLogic 8.1 does package the plugin.
Look in either in the weblogic81\server\lib\XXXXX directory or in the
weblogic81\server\bin directory for the mod_wl_20.so.
Eric
"Alan Wong" <[email protected]> wrote in message
news:3f02fc95$[email protected]..
>
I tried to find the Apache plugin for WebLogic 8.1, but I could not findone.
I downloaded the one from BEA web site, but it did not work. I run Apache2.0.46
on Windows 2000 and WebLogic 8.1. The plugin I downloaded gave an errormessage
complaining about the version is incompatible and require some 20020915version.
Does anyone know where I can find the apache plugin? We are testing tomove
forward to WebLogic 8.1 but without the plugin, we can not move forwardwith our
WebLogic 8.1 upgrade. Thank you for your help.
Alan

Lightroom does not recognize the raw format of files loading from my Nikon AW1 and loads them as jpegs. I know there are updates that would allow this camera to be recognized as shooting raw but I haven't been able to work it out. Any help out there?

Lightroom does not recognize the raw files (necs?) coming in from my Nikon AW1. It loads them as jpegs. I know it is possible to update Lightroom so it knows my Nikon but I can't get it to work.
I would like files to be loaded as .dng.

update by downloading the files directly and then applying them for lr 4 and earlier, http://www.adobe.com/downloads/updates/
for lr 5.7.1, the last lr 5 update, use the below link:
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 6| 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5 | 1
Contribute: CS5 | CS4, CS3 | 3,2
FrameMaker: 12, 11, 10, 9, 8, 7.2
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Solaris8 Intel able to recognize 7GB out of 40GB

Similar Messages

Maybe you are looking for