[SOLUTION] Evolution doesn't print

I ran into a problem with evolution. (Just started to use gnome since last weekend, until now it's mostly been kde for me.)
What it did was to only allow me to "print preview", the other button was greyed out. I could not get it to make a printout on any of my printers. Not even on cups-pdf.
If I opened the pdf file generated from evolution/evince preview (located in /tmp) with okular, I could print just fine?!
After trying all the things I could find on the Internet, (installing libgnomeprint, gnome-cups-manager and some others. And changing some config files.) I wanted to print some test pages from gnome-cups-manager just to verify my printersetup was OK. This wasn't possible either. After that I went to the cups web interface do try it from there, and here I also had problems.
That reminded me that I had problems already a while ago configuring my printers through the web interface. I had some weird addresses on the links, and got all kinds of "page doesn't exist" errors.
Finally today (I am sometimes a little slow   ) I checked the weird address on the link. It started with ::1 which I at first didn't recognize at all. Now I know that it's an IPv6 address.:rolleyes:
This got me to speculate whether this could also have something to do with my problems printing from evolution. And yes it did.
I disabled the IPv6 module as described in the wiki, and all is now fine for me again.
I make this post as a heads up to everyone who might get in the same situation. I did search for a solution both here and through google, but didn't turn anything up anywhere (on the IPv6 part that is).
Wasn't really sure if this belonged here or in another section of the forum. Please feel free to move it.
Last edited by madeye (2009-04-26 12:39:42)

schuay wrote:editing cupsd.conf solved it for me
Yes, but I was not focusing my attention on cups at first. Printing worked fine from KDE programs, so I thought that I had a configuration problem with Gnome somewhere.
Thanks for the link

Similar Messages

  • Epson SX218 doesn't print (client-error-document-format-not-supported)

    Hi there,
    I'm currently trying to figure out how to get my Epson Stylus SX 218 to work. Unfortunately, cups (or the printer or whatever causes my problems...) obviously just doesn't want me to get this to work.
    Here's what I've done so far:
    I installed everything as described in the CUPS wiki article (so ghostscript and all the foomatic-stuff is installed, usblp is NOT blacklisted, see why below)
    I installed epson-inkjet-printer-workforce-sx218 from AUR
    I started cups...
    Nothing worked (Printer not recognized, either with or without blacklisted usblp module...)
    I searched the forums for a solution
    I installed cups-usblp and reinstalled all the cups stuff
    Printer got recognized! Yay!
    So, now the printer is set up in cups using the avasys driver. But...
    It doesn't print!
    When I try to print a test page via the cups webinterface it keeps telling me
    Unsupported format "application/vnd.cups-banner".
    The following packages are installed now:
    $ pacman -Qs cups
    local/cups-usblp 1.5.0-1
    local/libcups 1.5.0-1
    $ pacman -Qs foomatic
    local/foomatic-db 1:4.0.7_20110707-1
    local/foomatic-db-engine 1:4.0.7_20110707-1
    local/foomatic-db-nonfree 1:4.0.7_20110707-1
    local/foomatic-filters 1:4.0.7_20110707-1
    $ pacman -Qs epson
    local/epson-inkjet-printer-workforce-320-sx218 1.0.0-6
    $ pacman -Qs ghostscript
    local/ghostscript 9.04-5
    Here's my cups error log:
    I [01/Jan/2012:18:59:01 +0100] Listening to [v1.::1]:631 (IPv6)
    I [01/Jan/2012:18:59:01 +0100] Listening to 127.0.0.1:631 (IPv4)
    I [01/Jan/2012:18:59:01 +0100] Listening to /var/run/cups/cups.sock (Domain)
    I [01/Jan/2012:18:59:01 +0100] Remote access is disabled.
    D [01/Jan/2012:18:59:01 +0100] Added auto ServerAlias mamapc
    I [01/Jan/2012:18:59:01 +0100] Loaded configuration file "/etc/cups/cupsd.conf"
    I [01/Jan/2012:18:59:01 +0100] Using default TempDir of /var/spool/cups/tmp...
    I [01/Jan/2012:18:59:01 +0100] Configured for up to 100 clients.
    I [01/Jan/2012:18:59:01 +0100] Allowing up to 100 client connections per host.
    I [01/Jan/2012:18:59:01 +0100] Using policy "default" as the default.
    D [01/Jan/2012:18:59:01 +0100] cupsdMarkDirty(---p--)
    D [01/Jan/2012:18:59:01 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Not busy"
    I [01/Jan/2012:18:59:01 +0100] Partial reload complete.
    I [01/Jan/2012:18:59:01 +0100] Listening to [v1.::1]:631 on fd 6...
    I [01/Jan/2012:18:59:01 +0100] Listening to 127.0.0.1:631 on fd 8...
    I [01/Jan/2012:18:59:01 +0100] Listening to /var/run/cups/cups.sock:631 on fd 9...
    I [01/Jan/2012:18:59:01 +0100] Resuming new connection processing...
    D [01/Jan/2012:18:59:01 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
    D [01/Jan/2012:18:59:01 +0100] Discarding unused server-restarted event...
    D [01/Jan/2012:18:59:01 +0100] cupsdAcceptClient: 13 from localhost:631 (IPv4)
    D [01/Jan/2012:18:59:01 +0100] Report: clients=1
    D [01/Jan/2012:18:59:01 +0100] Report: jobs=0
    D [01/Jan/2012:18:59:01 +0100] Report: jobs-active=0
    D [01/Jan/2012:18:59:01 +0100] Report: printers=0
    D [01/Jan/2012:18:59:01 +0100] Report: printers-implicit=0
    D [01/Jan/2012:18:59:01 +0100] Report: stringpool-string-count=407
    D [01/Jan/2012:18:59:01 +0100] Report: stringpool-alloc-bytes=4648
    D [01/Jan/2012:18:59:01 +0100] Report: stringpool-total-bytes=5736
    D [01/Jan/2012:18:59:01 +0100] PID 928 (/usr/lib/cups/cgi-bin/admin.cgi) exited with no errors.
    D [01/Jan/2012:18:59:01 +0100] cupsdReadClient: 13 GET /images/wait.gif HTTP/1.1
    D [01/Jan/2012:18:59:01 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
    D [01/Jan/2012:18:59:01 +0100] cupsdAuthorize: Authorized as root using Basic
    D [01/Jan/2012:18:59:01 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
    D [01/Jan/2012:18:59:06 +0100] cupsdReadClient: 13 GET /admin/?OP=redirect HTTP/1.1
    D [01/Jan/2012:18:59:06 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
    D [01/Jan/2012:18:59:06 +0100] cupsdAuthorize: Authorized as root using Basic
    D [01/Jan/2012:18:59:06 +0100] [CGI] argv[0] = "/usr/lib/cups/cgi-bin/admin.cgi"
    D [01/Jan/2012:18:59:06 +0100] [CGI] argv[1] = "OP=redirect"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[0] = "CUPS_CACHEDIR=/var/cache/cups"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[1] = "CUPS_DATADIR=/usr/share/cups"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[2] = "CUPS_DOCROOT=/usr/share/cups/doc"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[3] = "CUPS_FONTPATH=/usr/share/cups/fonts"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[4] = "CUPS_REQUESTROOT=/var/spool/cups"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[5] = "CUPS_SERVERBIN=/usr/lib/cups"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[6] = "CUPS_SERVERROOT=/etc/cups"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[7] = "CUPS_STATEDIR=/var/run/cups"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[8] = "HOME=/var/spool/cups/tmp"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[9] = "PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[10] = "SERVER_ADMIN=root@mamapc"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[11] = "SOFTWARE=CUPS/1.5.0"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[12] = "TMPDIR=/var/spool/cups/tmp"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[13] = "USER=root"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[14] = "CUPS_SERVER=/var/run/cups/cups.sock"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[15] = "CUPS_ENCRYPTION=IfRequested"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[16] = "IPP_PORT=631"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[17] = "AUTH_TYPE=Basic"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[18] = "LANG=de_DE.UTF8"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[19] = "REDIRECT_STATUS=1"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[20] = "GATEWAY_INTERFACE=CGI/1.1"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[21] = "SERVER_NAME=localhost"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[22] = "SERVER_PORT=631"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[23] = "REMOTE_ADDR=127.0.0.1"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[24] = "REMOTE_HOST=localhost"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[25] = "SCRIPT_NAME=/admin/"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[26] = "SCRIPT_FILENAME=/usr/share/cups/doc/admin/"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[27] = "REMOTE_USER=root"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[28] = "SERVER_PROTOCOL=HTTP/1.1"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[29] = "HTTP_COOKIE=org.cups.sid=960956618ce3e170434dd2afacd4fad3"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[30] = "HTTP_USER_AGENT=Opera/9.80 (X11; Linux i686; U; de) Presto/2.10.229 Version/11.60"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[31] = "HTTP_REFERER=http://localhost:631/admin"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[32] = "REQUEST_METHOD=GET"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[33] = "QUERY_STRING=OP=redirect"
    D [01/Jan/2012:18:59:06 +0100] [CGI] Started /usr/lib/cups/cgi-bin/admin.cgi (PID 929)
    I [01/Jan/2012:18:59:06 +0100] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=929)
    D [01/Jan/2012:18:59:06 +0100] cupsdSendCommand: 13 file=14
    D [01/Jan/2012:18:59:06 +0100] [CGI] admin.cgi started...
    D [01/Jan/2012:18:59:06 +0100] cupsdAcceptClient: 16 from localhost (Domain)
    D [01/Jan/2012:18:59:06 +0100] [CGI] http=0xb9359360
    D [01/Jan/2012:18:59:06 +0100] [CGI] org.cups.sid cookie is "960956618ce3e170434dd2afacd4fad3"
    D [01/Jan/2012:18:59:06 +0100] [CGI] redirecting with prefix http://localhost:631!
    D [01/Jan/2012:18:59:06 +0100] cupsdReadClient: 16 WAITING Closing on EOF
    D [01/Jan/2012:18:59:06 +0100] cupsdCloseClient: 16
    D [01/Jan/2012:18:59:06 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
    D [01/Jan/2012:18:59:06 +0100] Script header: Location: http://localhost:631/admin
    D [01/Jan/2012:18:59:06 +0100] Script header:
    D [01/Jan/2012:18:59:06 +0100] cupsdAcceptClient: 16 from localhost:631 (IPv4)
    D [01/Jan/2012:18:59:06 +0100] cupsdReadClient: 16 GET /admin HTTP/1.1
    D [01/Jan/2012:18:59:06 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
    D [01/Jan/2012:18:59:06 +0100] cupsdAuthorize: Authorized as root using Basic
    D [01/Jan/2012:18:59:06 +0100] [CGI] argv[0] = "/usr/lib/cups/cgi-bin/admin.cgi"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[0] = "CUPS_CACHEDIR=/var/cache/cups"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[1] = "CUPS_DATADIR=/usr/share/cups"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[2] = "CUPS_DOCROOT=/usr/share/cups/doc"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[3] = "CUPS_FONTPATH=/usr/share/cups/fonts"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[4] = "CUPS_REQUESTROOT=/var/spool/cups"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[5] = "CUPS_SERVERBIN=/usr/lib/cups"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[6] = "CUPS_SERVERROOT=/etc/cups"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[7] = "CUPS_STATEDIR=/var/run/cups"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[8] = "HOME=/var/spool/cups/tmp"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[9] = "PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[10] = "SERVER_ADMIN=root@mamapc"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[11] = "SOFTWARE=CUPS/1.5.0"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[12] = "TMPDIR=/var/spool/cups/tmp"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[13] = "USER=root"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[14] = "CUPS_SERVER=/var/run/cups/cups.sock"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[15] = "CUPS_ENCRYPTION=IfRequested"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[16] = "IPP_PORT=631"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[17] = "AUTH_TYPE=Basic"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[18] = "LANG=de_DE.UTF8"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[19] = "REDIRECT_STATUS=1"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[20] = "GATEWAY_INTERFACE=CGI/1.1"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[21] = "SERVER_NAME=localhost"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[22] = "SERVER_PORT=631"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[23] = "REMOTE_ADDR=127.0.0.1"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[24] = "REMOTE_HOST=localhost"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[25] = "SCRIPT_NAME=/admin"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[26] = "SCRIPT_FILENAME=/usr/share/cups/doc/admin"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[27] = "REMOTE_USER=root"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[28] = "SERVER_PROTOCOL=HTTP/1.1"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[29] = "HTTP_COOKIE=org.cups.sid=960956618ce3e170434dd2afacd4fad3"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[30] = "HTTP_USER_AGENT=Opera/9.80 (X11; Linux i686; U; de) Presto/2.10.229 Version/11.60"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[31] = "HTTP_REFERER=http://localhost:631/admin"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[32] = "REQUEST_METHOD=GET"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[33] = "QUERY_STRING="
    D [01/Jan/2012:18:59:06 +0100] [CGI] Started /usr/lib/cups/cgi-bin/admin.cgi (PID 930)
    I [01/Jan/2012:18:59:06 +0100] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=930)
    D [01/Jan/2012:18:59:06 +0100] cupsdSendCommand: 16 file=17
    D [01/Jan/2012:18:59:06 +0100] PID 929 (/usr/lib/cups/cgi-bin/admin.cgi) exited with no errors.
    D [01/Jan/2012:18:59:06 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
    D [01/Jan/2012:18:59:06 +0100] [CGI] admin.cgi started...
    D [01/Jan/2012:18:59:06 +0100] cupsdAcceptClient: 14 from localhost (Domain)
    D [01/Jan/2012:18:59:06 +0100] [CGI] http=0xb866c360
    D [01/Jan/2012:18:59:06 +0100] [CGI] org.cups.sid cookie is "960956618ce3e170434dd2afacd4fad3"
    D [01/Jan/2012:18:59:06 +0100] [CGI] No form data, showing main menu...
    D [01/Jan/2012:18:59:06 +0100] [CGI] /usr/share/cups/drivers/pscript5.dll: Datei oder Verzeichnis nicht gefunden
    D [01/Jan/2012:18:59:06 +0100] cupsdReadClient: 14 POST / HTTP/1.1
    D [01/Jan/2012:18:59:06 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
    D [01/Jan/2012:18:59:06 +0100] cupsdAuthorize: No authentication data provided.
    D [01/Jan/2012:18:59:06 +0100] cupsdReadClient: 14 1.1 Get-Subscriptions 1
    D [01/Jan/2012:18:59:06 +0100] Get-Subscriptions ipp://localhost/
    D [01/Jan/2012:18:59:06 +0100] Get-Subscriptions client-error-not-found: No subscriptions found.
    D [01/Jan/2012:18:59:06 +0100] Returning IPP client-error-not-found for Get-Subscriptions (ipp://localhost/) from localhost
    D [01/Jan/2012:18:59:06 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
    D [01/Jan/2012:18:59:06 +0100] Script header: Content-Type: text/html;charset=utf-8
    D [01/Jan/2012:18:59:06 +0100] Script header:
    D [01/Jan/2012:18:59:06 +0100] cupsdReadClient: 14 WAITING Closing on EOF
    D [01/Jan/2012:18:59:06 +0100] cupsdCloseClient: 14
    D [01/Jan/2012:18:59:06 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
    D [01/Jan/2012:18:59:06 +0100] PID 930 (/usr/lib/cups/cgi-bin/admin.cgi) exited with no errors.
    D [01/Jan/2012:18:59:06 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
    D [01/Jan/2012:18:59:11 +0100] cupsdReadClient: 13 GET / HTTP/1.1
    D [01/Jan/2012:18:59:11 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
    D [01/Jan/2012:18:59:11 +0100] cupsdAuthorize: Authorized as root using Basic
    D [01/Jan/2012:18:59:11 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
    D [01/Jan/2012:18:59:11 +0100] cupsdReadClient: 13 WAITING Closing on EOF
    D [01/Jan/2012:18:59:11 +0100] cupsdCloseClient: 13
    D [01/Jan/2012:18:59:11 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
    D [01/Jan/2012:18:59:12 +0100] cupsdReadClient: 16 WAITING Closing on EOF
    D [01/Jan/2012:18:59:12 +0100] cupsdCloseClient: 16
    D [01/Jan/2012:18:59:12 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
    D [01/Jan/2012:18:59:12 +0100] cupsdAcceptClient: 13 from localhost:631 (IPv4)
    D [01/Jan/2012:18:59:12 +0100] cupsdReadClient: 13 GET /admin/log/access_log? HTTP/1.1
    D [01/Jan/2012:18:59:12 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
    D [01/Jan/2012:18:59:12 +0100] cupsdAuthorize: Authorized as root using Basic
    D [01/Jan/2012:18:59:12 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
    I [01/Jan/2012:18:59:32 +0100] Generating printcap /etc/printcap...
    D [01/Jan/2012:18:59:32 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Dirty files"
    D [01/Jan/2012:18:59:35 +0100] cupsdAcceptClient: 14 from localhost (Domain)
    D [01/Jan/2012:18:59:35 +0100] cupsdReadClient: 14 POST / HTTP/1.1
    D [01/Jan/2012:18:59:35 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
    D [01/Jan/2012:18:59:35 +0100] cupsdAuthorize: No authentication data provided.
    D [01/Jan/2012:18:59:35 +0100] cupsdReadClient: 14 1.1 CUPS-Get-Devices 1
    D [01/Jan/2012:18:59:35 +0100] CUPS-Get-Devices
    D [01/Jan/2012:18:59:35 +0100] cupsdIsAuthorized: username=""
    D [01/Jan/2012:18:59:35 +0100] Returning HTTP Unauthorized for CUPS-Get-Devices (no URI) from localhost
    D [01/Jan/2012:18:59:35 +0100] cupsdSendHeader: 14 WWW-Authenticate: Basic realm="CUPS", trc="y"
    D [01/Jan/2012:18:59:35 +0100] cupsdReadClient: 14 WAITING Closing on EOF
    D [01/Jan/2012:18:59:35 +0100] cupsdCloseClient: 14
    D [01/Jan/2012:18:59:35 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
    D [01/Jan/2012:18:59:35 +0100] cupsdAcceptClient: 14 from localhost (Domain)
    D [01/Jan/2012:18:59:35 +0100] cupsdAcceptClient: 16 from localhost (Domain)
    D [01/Jan/2012:18:59:35 +0100] cupsdReadClient: 14 WAITING Closing on EOF
    D [01/Jan/2012:18:59:35 +0100] cupsdCloseClient: 14
    D [01/Jan/2012:18:59:35 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
    D [01/Jan/2012:18:59:35 +0100] cupsdReadClient: 16 POST / HTTP/1.1
    D [01/Jan/2012:18:59:35 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
    D [01/Jan/2012:18:59:35 +0100] cupsdAuthorize: Authorized as root using PeerCred
    D [01/Jan/2012:18:59:35 +0100] cupsdReadClient: 16 1.1 CUPS-Get-Devices 1
    D [01/Jan/2012:18:59:35 +0100] CUPS-Get-Devices
    D [01/Jan/2012:18:59:35 +0100] cupsdIsAuthorized: username="root"
    D [01/Jan/2012:18:59:35 +0100] [CGI] argv[0] = "/usr/lib/cups/daemon/cups-deviced"
    D [01/Jan/2012:18:59:35 +0100] [CGI] argv[1] = "1"
    D [01/Jan/2012:18:59:35 +0100] [CGI] argv[2] = "0"
    D [01/Jan/2012:18:59:35 +0100] [CGI] argv[3] = "2"
    D [01/Jan/2012:18:59:35 +0100] [CGI] argv[4] = "2"
    D [01/Jan/2012:18:59:35 +0100] [CGI] argv[5] = "requested-attributes=all exclude-schemes='beh','cups-pdf','bluetooth','dnssd','http','https','ipp','lpd','ncp','parallel','scsi','smb','snmp','socket'"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[0] = "CUPS_CACHEDIR=/var/cache/cups"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[1] = "CUPS_DATADIR=/usr/share/cups"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[2] = "CUPS_DOCROOT=/usr/share/cups/doc"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[3] = "CUPS_FONTPATH=/usr/share/cups/fonts"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[4] = "CUPS_REQUESTROOT=/var/spool/cups"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[5] = "CUPS_SERVERBIN=/usr/lib/cups"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[6] = "CUPS_SERVERROOT=/etc/cups"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[7] = "CUPS_STATEDIR=/var/run/cups"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[8] = "HOME=/var/spool/cups/tmp"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[9] = "PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[10] = "SERVER_ADMIN=root@mamapc"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[11] = "SOFTWARE=CUPS/1.5.0"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[12] = "TMPDIR=/var/spool/cups/tmp"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[13] = "USER=root"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[14] = "CUPS_SERVER=/var/run/cups/cups.sock"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[15] = "CUPS_ENCRYPTION=IfRequested"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[16] = "IPP_PORT=631"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[17] = "AUTH_TYPE=PeerCred"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[18] = "LANG=en_US.UTF8"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[19] = "REDIRECT_STATUS=1"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[20] = "GATEWAY_INTERFACE=CGI/1.1"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[21] = "SERVER_NAME=localhost"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[22] = "SERVER_PORT=631"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[23] = "REMOTE_ADDR="
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[24] = "REMOTE_HOST=localhost"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[25] = "SCRIPT_NAME=/"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[26] = "SCRIPT_FILENAME=/usr/share/cups/doc/"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[27] = "REMOTE_USER=root"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[28] = "SERVER_PROTOCOL=HTTP/1.1"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[29] = "HTTP_USER_AGENT=CUPS/1.5.0"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[30] = "REQUEST_METHOD=POST"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[31] = "CONTENT_LENGTH=244"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[32] = "CONTENT_TYPE=application/ipp"
    D [01/Jan/2012:18:59:35 +0100] [CGI] Started /usr/lib/cups/daemon/cups-deviced (PID 948)
    I [01/Jan/2012:18:59:35 +0100] Started "/usr/lib/cups/daemon/cups-deviced" (pid=948)
    D [01/Jan/2012:18:59:35 +0100] cupsdSendCommand: 16 file=14
    D [01/Jan/2012:18:59:35 +0100] [cups-deviced] Started backend /usr/lib/cups/backend/mdns (PID 949)
    D [01/Jan/2012:18:59:35 +0100] [cups-deviced] Started backend /usr/lib/cups/backend/usb (PID 950)
    D [01/Jan/2012:18:59:35 +0100] [cups-deviced] Started backend /usr/lib/cups/backend/ipps (PID 951)
    D [01/Jan/2012:18:59:35 +0100] [cups-deviced] Started backend /usr/lib/cups/backend/serial (PID 952)
    D [01/Jan/2012:18:59:35 +0100] [cups-deviced] PID 949 (mdns) exited with no errors.
    D [01/Jan/2012:18:59:35 +0100] [CGI] list_devices
    D [01/Jan/2012:18:59:35 +0100] [CGI] usb_find_busses=2
    D [01/Jan/2012:18:59:35 +0100] [CGI] usb_find_devices=7
    D [01/Jan/2012:18:59:35 +0100] [CGI] libusb couldn't open USB device /dev/bus/usb/002/002: Permission denied.
    D [01/Jan/2012:18:59:35 +0100] [CGI] libusb requires write access to USB device nodes.
    D [01/Jan/2012:18:59:35 +0100] [cups-deviced] PID 950 (usb) exited with no errors.
    D [01/Jan/2012:18:59:35 +0100] [CGI] Flushed attributes...
    D [01/Jan/2012:18:59:35 +0100] [cups-deviced] Found device "ipps"...
    D [01/Jan/2012:18:59:35 +0100] [cups-deviced] PID 951 (ipps) exited with no errors.
    D [01/Jan/2012:18:59:35 +0100] Script header: Content-Type: application/ipp
    D [01/Jan/2012:18:59:35 +0100] Script header:
    D [01/Jan/2012:18:59:35 +0100] [CGI] Flushed attributes...
    D [01/Jan/2012:18:59:35 +0100] [cups-deviced] Found device "serial:/dev/ttyS0?baud=115200"...
    D [01/Jan/2012:18:59:35 +0100] [CGI] Flushed attributes...
    D [01/Jan/2012:18:59:35 +0100] [cups-deviced] Found device "serial:/dev/ttyS1?baud=115200"...
    D [01/Jan/2012:18:59:35 +0100] [cups-deviced] PID 952 (serial) exited with no errors.
    D [01/Jan/2012:18:59:35 +0100] PID 948 (/usr/lib/cups/daemon/cups-deviced) exited with no errors.
    D [01/Jan/2012:18:59:35 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
    D [01/Jan/2012:18:59:35 +0100] cupsdReadClient: 16 WAITING Closing on EOF
    D [01/Jan/2012:18:59:35 +0100] cupsdCloseClient: 16
    D [01/Jan/2012:18:59:35 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
    D [01/Jan/2012:19:00:23 +0100] Report: clients=1
    D [01/Jan/2012:19:00:23 +0100] Report: jobs=0
    D [01/Jan/2012:19:00:23 +0100] Report: jobs-active=0
    D [01/Jan/2012:19:00:23 +0100] Report: printers=0
    D [01/Jan/2012:19:00:23 +0100] Report: printers-implicit=0
    D [01/Jan/2012:19:00:23 +0100] Report: stringpool-string-count=407
    D [01/Jan/2012:19:00:23 +0100] Report: stringpool-alloc-bytes=4648
    D [01/Jan/2012:19:00:23 +0100] Report: stringpool-total-bytes=5736
    D [01/Jan/2012:19:01:15 +0100] cupsdReadClient: 13 WAITING Closing on EOF
    D [01/Jan/2012:19:01:15 +0100] cupsdCloseClient: 13
    D [01/Jan/2012:19:01:15 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
    D [01/Jan/2012:19:19:03 +0100] Report: clients=0
    D [01/Jan/2012:19:19:03 +0100] Report: jobs=0
    D [01/Jan/2012:19:19:03 +0100] Report: jobs-active=0
    D [01/Jan/2012:19:19:03 +0100] Report: printers=0
    D [01/Jan/2012:19:19:03 +0100] Report: printers-implicit=0
    D [01/Jan/2012:19:19:03 +0100] Report: stringpool-string-count=407
    D [01/Jan/2012:19:19:03 +0100] Report: stringpool-alloc-bytes=4648
    D [01/Jan/2012:19:19:03 +0100] Report: stringpool-total-bytes=5736
    D [01/Jan/2012:19:22:10 +0100] Report: clients=0
    D [01/Jan/2012:19:22:11 +0100] Report: jobs=0
    D [01/Jan/2012:19:22:11 +0100] Report: jobs-active=0
    D [01/Jan/2012:19:22:11 +0100] Report: printers=0
    D [01/Jan/2012:19:22:11 +0100] Report: printers-implicit=0
    D [01/Jan/2012:19:22:11 +0100] Report: stringpool-string-count=407
    D [01/Jan/2012:19:22:11 +0100] Report: stringpool-alloc-bytes=4648
    D [01/Jan/2012:19:22:11 +0100] Report: stringpool-total-bytes=5736
    D [01/Jan/2012:19:24:21 +0100] Report: clients=0
    D [01/Jan/2012:19:24:21 +0100] Report: jobs=0
    D [01/Jan/2012:19:24:21 +0100] Report: jobs-active=0
    D [01/Jan/2012:19:24:21 +0100] Report: printers=0
    D [01/Jan/2012:19:24:21 +0100] Report: printers-implicit=0
    D [01/Jan/2012:19:24:21 +0100] Report: stringpool-string-count=407
    D [01/Jan/2012:19:24:21 +0100] Report: stringpool-alloc-bytes=4648
    D [01/Jan/2012:19:24:21 +0100] Report: stringpool-total-bytes=5736
    D [01/Jan/2012:19:27:26 +0100] Report: clients=0
    D [01/Jan/2012:19:27:26 +0100] Report: jobs=0
    D [01/Jan/2012:19:27:26 +0100] Report: jobs-active=0
    D [01/Jan/2012:19:27:26 +0100] Report: printers=0
    D [01/Jan/2012:19:27:26 +0100] Report: printers-implicit=0
    D [01/Jan/2012:19:27:26 +0100] Report: stringpool-string-count=407
    D [01/Jan/2012:19:27:26 +0100] Report: stringpool-alloc-bytes=4648
    D [01/Jan/2012:19:27:26 +0100] Report: stringpool-total-bytes=5736
    D [01/Jan/2012:19:37:11 +0100] Report: clients=0
    D [01/Jan/2012:19:37:11 +0100] Report: jobs=0
    D [01/Jan/2012:19:37:11 +0100] Report: jobs-active=0
    D [01/Jan/2012:19:37:11 +0100] Report: printers=0
    D [01/Jan/2012:19:37:11 +0100] Report: printers-implicit=0
    D [01/Jan/2012:19:37:11 +0100] Report: stringpool-string-count=407
    D [01/Jan/2012:19:37:11 +0100] Report: stringpool-alloc-bytes=4648
    D [01/Jan/2012:19:37:11 +0100] Report: stringpool-total-bytes=5736
    I [01/Jan/2012:19:37:41 +0100] Scheduler shutting down normally.
    D [01/Jan/2012:19:37:41 +0100] Discarding unused server-stopped event...
    I [01/Jan/2012:19:37:41 +0100] Saving job.cache...
    I [01/Jan/2012:19:38:18 +0100] Listening to [v1.::1]:631 (IPv6)
    I [01/Jan/2012:19:38:18 +0100] Listening to 127.0.0.1:631 (IPv4)
    I [01/Jan/2012:19:38:18 +0100] Listening to /var/run/cups/cups.sock (Domain)
    I [01/Jan/2012:19:38:18 +0100] Remote access is disabled.
    D [01/Jan/2012:19:38:18 +0100] Added auto ServerAlias mamapc
    I [01/Jan/2012:19:38:18 +0100] Loaded configuration file "/etc/cups/cupsd.conf"
    D [01/Jan/2012:19:38:18 +0100] Creating missing directory "/var/run/cups"
    D [01/Jan/2012:19:38:18 +0100] Repairing ownership of "/var/run/cups"
    D [01/Jan/2012:19:38:18 +0100] Repairing access permissions of "/var/run/cups"
    D [01/Jan/2012:19:38:18 +0100] Creating missing directory "/var/run/cups/certs"
    D [01/Jan/2012:19:38:18 +0100] Repairing ownership of "/var/run/cups/certs"
    D [01/Jan/2012:19:38:18 +0100] Repairing access permissions of "/var/run/cups/certs"
    I [01/Jan/2012:19:38:18 +0100] Using default TempDir of /var/spool/cups/tmp...
    I [01/Jan/2012:19:38:18 +0100] Configured for up to 100 clients.
    I [01/Jan/2012:19:38:18 +0100] Allowing up to 100 client connections per host.
    I [01/Jan/2012:19:38:18 +0100] Using policy "default" as the default.
    I [01/Jan/2012:19:38:18 +0100] Full reload is required.
    I [01/Jan/2012:19:38:19 +0100] Loaded MIME database from "/usr/share/cups/mime" and "/etc/cups": 35 types, 42 filters...
    I [01/Jan/2012:19:38:19 +0100] Loading job cache file "/var/cache/cups/job.cache"...
    I [01/Jan/2012:19:38:19 +0100] Full reload complete.
    D [01/Jan/2012:19:38:19 +0100] cupsdCleanFiles(path="/var/spool/cups/tmp", pattern="(null)")
    I [01/Jan/2012:19:38:19 +0100] Cleaning out old files in "/var/spool/cups/tmp"...
    D [01/Jan/2012:19:38:19 +0100] Removed "/var/spool/cups/tmp/0039f4f0366a5"...
    D [01/Jan/2012:19:38:19 +0100] cupsdCleanFiles(path="/var/cache/cups", pattern="*.ipp")
    I [01/Jan/2012:19:38:19 +0100] Cleaning out old files in "/var/cache/cups"...
    I [01/Jan/2012:19:38:19 +0100] Listening to [v1.::1]:631 on fd 8...
    I [01/Jan/2012:19:38:19 +0100] Listening to 127.0.0.1:631 on fd 9...
    I [01/Jan/2012:19:38:19 +0100] Listening to /var/run/cups/cups.sock:631 on fd 10...
    I [01/Jan/2012:19:38:19 +0100] Resuming new connection processing...
    D [01/Jan/2012:19:38:19 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
    D [01/Jan/2012:19:38:19 +0100] Discarding unused server-started event...
    D [01/Jan/2012:19:38:20 +0100] Report: clients=0
    D [01/Jan/2012:19:38:20 +0100] Report: jobs=0
    D [01/Jan/2012:19:38:20 +0100] Report: jobs-active=0
    D [01/Jan/2012:19:38:20 +0100] Report: printers=0
    D [01/Jan/2012:19:38:20 +0100] Report: printers-implicit=0
    D [01/Jan/2012:19:38:20 +0100] Report: stringpool-string-count=289
    D [01/Jan/2012:19:38:20 +0100] Report: stringpool-alloc-bytes=4648
    D [01/Jan/2012:19:38:20 +0100] Report: stringpool-total-bytes=4792
    I [01/Jan/2012:20:53:48 +0100] Scheduler shutting down normally.
    D [01/Jan/2012:20:53:48 +0100] Discarding unused server-stopped event...
    I [01/Jan/2012:20:53:48 +0100] Saving job.cache...
    I [01/Jan/2012:20:54:26 +0100] Listening to [v1.::1]:631 (IPv6)
    I [01/Jan/2012:20:54:26 +0100] Listening to 127.0.0.1:631 (IPv4)
    I [01/Jan/2012:20:54:26 +0100] Listening to /var/run/cups/cups.sock (Domain)
    I [01/Jan/2012:20:54:26 +0100] Remote access is disabled.
    D [01/Jan/2012:20:54:26 +0100] Added auto ServerAlias mamapc
    I [01/Jan/2012:20:54:26 +0100] Loaded configuration file "/etc/cups/cupsd.conf"
    D [01/Jan/2012:20:54:26 +0100] Creating missing directory "/var/run/cups"
    D [01/Jan/2012:20:54:26 +0100] Repairing ownership of "/var/run/cups"
    D [01/Jan/2012:20:54:26 +0100] Repairing access permissions of "/var/run/cups"
    D [01/Jan/2012:20:54:26 +0100] Creating missing directory "/var/run/cups/certs"
    D [01/Jan/2012:20:54:26 +0100] Repairing ownership of "/var/run/cups/certs"
    D [01/Jan/2012:20:54:26 +0100] Repairing access permissions of "/var/run/cups/certs"
    I [01/Jan/2012:20:54:26 +0100] Using default TempDir of /var/spool/cups/tmp...
    I [01/Jan/2012:20:54:26 +0100] Configured for up to 100 clients.
    I [01/Jan/2012:20:54:26 +0100] Allowing up to 100 client connections per host.
    I [01/Jan/2012:20:54:26 +0100] Using policy "default" as the default.
    I [01/Jan/2012:20:54:26 +0100] Full reload is required.
    I [01/Jan/2012:20:54:27 +0100] Loaded MIME database from "/usr/share/cups/mime" and "/etc/cups": 35 types, 42 filters...
    I [01/Jan/2012:20:54:27 +0100] Loading job cache file "/var/cache/cups/job.cache"...
    I [01/Jan/2012:20:54:27 +0100] Full reload complete.
    D [01/Jan/2012:20:54:27 +0100] cupsdCleanFiles(path="/var/spool/cups/tmp", pattern="(null)")
    I [01/Jan/2012:20:54:27 +0100] Cleaning out old files in "/var/spool/cups/tmp"...
    D [01/Jan/2012:20:54:27 +0100] cupsdCleanFiles(path="/var/cache/cups", pattern="*.ipp")
    I [01/Jan/2012:20:54:27 +0100] Cleaning out old files in "/var/cache/cups"...
    I [01/Jan/2012:20:54:27 +0100] Listening to [v1.::1]:631 on fd 8...
    I [01/Jan/2012:20:54:27 +0100] Listening to 127.0.0.1:631 on fd 9...
    I [01/Jan/2012:20:54:27 +0100] Listening to /var/run/cups/cups.sock:631 on fd 10...
    I [01/Jan/2012:20:54:27 +0100] Resuming new connection processing...
    D [01/Jan/2012:20:54:27 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
    D [01/Jan/2012:20:54:27 +0100] Discarding unused server-started event...
    D [01/Jan/2012:20:54:28 +0100] Report: clients=0
    D [01/Jan/2012:20:54:28 +0100] Report: jobs=0
    D [01/Jan/2012:20:54:28 +0100] Report: jobs-active=0
    D [01/Jan/2012:20:54:28 +0100] Report: printers=0
    D [01/Jan/2012:20:54:28 +0100] Report: printers-implicit=0
    D [01/Jan/2012:20:54:28 +0100] Report: stringpool-string-count=289
    D [01/Jan/2012:20:54:28 +0100] Report: stringpool-alloc-bytes=4648
    D [01/Jan/2012:20:54:28 +0100] Report: stringpool-total-bytes=4792
    I [02/Jan/2012:05:34:23 +0100] Scheduler shutting down normally.
    D [02/Jan/2012:05:34:24 +0100] Discarding unused server-stopped event...
    I [02/Jan/2012:05:34:24 +0100] Saving job.cache...
    I [02/Jan/2012:05:35:05 +0100] Listening to [v1.::1]:631 (IPv6)
    I [02/Jan/2012:05:35:05 +0100] Listening to 127.0.0.1:631 (IPv4)
    I [02/Jan/2012:05:35:05 +0100] Listening to /var/run/cups/cups.sock (Domain)
    I [02/Jan/2012:05:35:05 +0100] Remote access is disabled.
    D [02/Jan/2012:05:35:05 +0100] Added auto ServerAlias mamapc
    I [02/Jan/2012:05:35:05 +0100] Loaded configuration file "/etc/cups/cupsd.conf"
    D [02/Jan/2012:05:35:05 +0100] Creating missing directory "/var/run/cups"
    D [02/Jan/2012:05:35:05 +0100] Repairing ownership of "/var/run/cups"
    D [02/Jan/2012:05:35:05 +0100] Repairing access permissions of "/var/run/cups"
    D [02/Jan/2012:05:35:05 +0100] Creating missing directory "/var/run/cups/certs"
    D [02/Jan/2012:05:35:05 +0100] Repairing ownership of "/var/run/cups/certs"
    D [02/Jan/2012:05:35:05 +0100] Repairing access permissions of "/var/run/cups/certs"
    I [02/Jan/2012:05:35:05 +0100] Using default TempDir of /var/spool/cups/tmp...
    I [02/Jan/2012:05:35:05 +0100] Configured for up to 100 clients.
    I [02/Jan/2012:05:35:05 +0100] Allowing up to 100 client connections per host.
    I [02/Jan/2012:05:35:05 +0100] Using policy "default" as the default.
    I [02/Jan/2012:05:35:05 +0100] Full reload is required.
    I [02/Jan/2012:05:35:06 +0100] Loaded MIME database from "/usr/share/cups/mime" and "/etc/cups": 35 types, 42 filters...
    I [02/Jan/2012:05:35:06 +0100] Loading job cache file "/var/cache/cups/job.cache"...
    I [02/Jan/2012:05:35:06 +0100] Full reload complete.
    D [02/Jan/2012:05:35:06 +0100] cupsdCleanFiles(path="/var/spool/cups/tmp", pattern="(null)")
    I [02/Jan/2012:05:35:06 +0100] Cleaning out old files in "/var/spool/cups/tmp"...
    D [02/Jan/2012:05:35:06 +0100] cupsdCleanFiles(path="/var/cache/cups", pattern="*.ipp")
    I [02/Jan/2012:05:35:06 +0100] Cleaning out old files in "/var/cache/cups"...
    I [02/Jan/2012:05:35:06 +0100] Listening to [v1.::1]:631 on fd 8...
    I [02/Jan/2012:05:35:06 +0100] Listening to 127.0.0.1:631 on fd 9...
    I [02/Jan/2012:05:35:06 +0100] Listening to /var/run/cups/cups.sock:631 on fd 10...
    I [02/Jan/2012:05:35:06 +0100] Resuming new connection processing...
    D [02/Jan/2012:05:35:06 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
    D [02/Jan/2012:05:35:06 +0100] Discarding unused server-started event...
    D [02/Jan/2012:05:35:07 +0100] Report: clients=0
    D [02/Jan/2012:05:35:07 +0100] Report: jobs=0
    D [02/Jan/2012:05:35:07 +0100] Report: jobs-active=0
    D [02/Jan/2012:05:35:07 +0100] Report: printers=0
    D [02/Jan/2012:05:35:07 +0100] Report: printers-implicit=0
    D [02/Jan/2012:05:35:07 +0100] Report: stringpool-string-count=289
    D [02/Jan/2012:05:35:07 +0100] Report: stringpool-alloc-bytes=4648
    D [02/Jan/2012:05:35:07 +0100] Report: stringpool-total-bytes=4792
    I [02/Jan/2012:05:56:24 +0100] Scheduler shutting down normally.
    D [02/Jan/2012:05:56:24 +0100] Discarding unused server-stopped event...
    I [02/Jan/2012:05:56:24 +0100] Saving job.cache...
    I [02/Jan/2012:17:22:51 +0100] Listening to [v1.::1]:631 (IPv6)
    I [02/Jan/2012:17:22:51 +0100] Listening to 127.0.0.1:631 (IPv4)
    I [02/Jan/2012:17:22:51 +0100] Listening to /var/run/cups/cups.sock (Domain)
    I [02/Jan/2012:17:22:51 +0100] Remote access is disabled.
    D [02/Jan/2012:17:22:51 +0100] Added auto ServerAlias mamapc
    I [02/Jan/2012:17:22:51 +0100] Loaded configuration file "/etc/cups/cupsd.conf"
    D [02/Jan/2012:17:22:51 +0100] Creating missing directory "/var/run/cups"
    D [02/Jan/2012:17:22:51 +0100] Repairing ownership of "/var/run/cups"
    D [02/Jan/2012:17:22:51 +0100] Repairing access permissions of "/var/run/cups"
    D [02/Jan/2012:17:22:51 +0100] Creating missing directory "/var/run/cups/certs"
    D [02/Jan/2012:17:22:51 +0100] Repairing ownership of "/var/run/cups/certs"
    D [02/Jan/2012:17:22:51 +0100] Repairing access permissions of "/var/run/cups/certs"
    I [02/Jan/2012:17:22:51 +0100] Using default TempDir of /var/spool/cups/tmp...
    I [02/Jan/2012:17:22:51 +0100] Configured for up to 100 clients.
    I [02/Jan/2012:17:22:51 +0100] Allowing up to 100 client connections per host.
    I [02/Jan/2012:17:22:51 +0100] Using policy "default" as the default.
    I [02/Jan/2012:17:22:51 +0100] Full reload is required.
    I [02/Jan/2012:17:22:52 +0100] Loaded MIME database from "/usr/share/cups/mime" and "/etc/cups": 35 types, 42 filters...
    I [02/Jan/2012:17:22:52 +0100] Loading job cache file "/var/cache/cups/job.cache"...
    I [02/Jan/2012:17:22:52 +0100] Full reload complete.
    D [02/Jan/2012:17:22:52 +0100] cupsdCleanFiles(path="/var/spool/cups/tmp", pattern="(null)")
    I [02/Jan/2012:17:22:52 +0100] Cleaning out old files in "/var/spool/cups/tmp"...
    D [02/Jan/2012:17:22:52 +0100] cupsdCleanFiles(path="/var/cache/cups", pattern="*.ipp")
    I [02/Jan/2012:17:22:52 +0100] Cleaning out old files in "/var/cache/cups"...
    I [02/Jan/2012:17:22:52 +0100] Listening to [v1.::1]:631 on fd 8...
    I [02/Jan/2012:17:22:52 +0100] Listening to 127.0.0.1:631 on fd 9...
    I [02/Jan/2012:17:22:52 +0100] Listening to /var/run/cups/cups.sock:631 on fd 10...
    I [02/Jan/2012:17:22:52 +0100] Resuming new connection processing...
    D [02/Jan/2012:17:22:52 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
    D [02/Jan/2012:17:22:52 +0100] Discarding unused server-started event...
    D [02/Jan/2012:17:22:53 +0100] Report: clients=0
    D [02/Jan/2012:17:22:53 +0100] Report: jobs=0
    D [02/Jan/2012:17:22:53 +0100] Report: jobs-active=0
    D [02/Jan/2012:17:22:53 +0100] Report: printers=0
    D [02/Jan/2012:17:22:53 +0100] Report: printers-implicit=0
    D [02/Jan/2012:17:22:53 +0100] Report: stringpool-string-count=289
    D [02/Jan/2012:17:22:53 +0100] Report: stringpool-alloc-bytes=4648
    D [02/Jan/2012:17:22:53 +0100] Report: stringpool-total-bytes=4792
    I [02/Jan/2012:18:15:27 +0100] Scheduler shutting down normally.
    D [02/Jan/2012:18:15:27 +0100] Discarding unused server-stopped event...
    I [02/Jan/2012:18:15:27 +0100] Saving job.cache...
    E [02/Jan/2012:18:40:40 +0100] cupsdAuthorize: pam_authenticate() returned 7 (Authentication failure)!
    E [02/Jan/2012:18:41:03 +0100] Bad request line "%16%03%01" from localhost!
    E [02/Jan/2012:18:41:03 +0100] Bad request line "%16%03%01" from localhost!
    E [02/Jan/2012:18:41:03 +0100] Bad request line "%16%03%01" from localhost!
    E [02/Jan/2012:18:41:03 +0100] Bad request line "%16%03%01" from localhost!
    E [02/Jan/2012:18:41:04 +0100] Bad request line "%16%03%01" from localhost!
    E [02/Jan/2012:18:44:36 +0100] Returning HTTP Forbidden for CUPS-Delete-Printer (ipp://localhost/printers/Epson-Stylus-SX218) from localhost
    E [02/Jan/2012:18:46:25 +0100] Returning IPP client-error-document-format-not-supported for Print-Job (ipp://localhost:631/printers/Epson_Stylus_SX218) from localhost
    E [02/Jan/2012:18:54:25 +0100] Bad request line "%16%03%01" from localhost!
    E [02/Jan/2012:18:54:25 +0100] Bad request line "%16%03%01" from localhost!
    E [02/Jan/2012:18:54:25 +0100] Bad request line "%16%03%01" from localhost!
    E [02/Jan/2012:18:54:26 +0100] Bad request line "%16%03%01" from localhost!
    E [02/Jan/2012:18:56:58 +0100] Bad request line "%16%03%01" from localhost!
    E [02/Jan/2012:18:58:04 +0100] Bad request line "%16%03%01" from localhost!
    E [02/Jan/2012:18:58:04 +0100] Bad request line "%16%03%01" from localhost!
    W [02/Jan/2012:19:01:48 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Brother/BR5070DN_GPL.ppd.gz!
    E [02/Jan/2012:19:01:49 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
    W [02/Jan/2012:19:01:53 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/KONICA_MINOLTA/KOC451JX.ppd.gz!
    W [02/Jan/2012:19:01:53 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Xerox/xrx6120pu.ppd!
    W [02/Jan/2012:19:01:54 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp950c.ppd.gz!
    W [02/Jan/2012:19:01:54 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp960s.ppd.gz!
    W [02/Jan/2012:19:01:54 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp9100.ppd.gz!
    W [02/Jan/2012:19:01:54 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp880c.ppd.gz!
    W [02/Jan/2012:19:01:54 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp980c.ppd.gz!
    W [02/Jan/2012:19:01:54 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp850c.ppd.gz!
    W [02/Jan/2012:19:01:54 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp920c.ppd.gz!
    W [02/Jan/2012:19:01:54 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp830c.ppd.gz!
    E [02/Jan/2012:19:02:06 +0100] Bad request line "%16%03%01" from localhost!
    E [02/Jan/2012:19:02:11 +0100] Bad request line "%16%03%01" from localhost!
    E [02/Jan/2012:19:02:11 +0100] Bad request line "%16%03%01" from localhost!
    E [02/Jan/2012:19:02:11 +0100] Bad request line "%16%03%01" from localhost!
    W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Brother/BR5070DN_GPL.ppd.gz!
    E [02/Jan/2012:19:02:57 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
    W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/KONICA_MINOLTA/KOC451JX.ppd.gz!
    W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Xerox/xrx6120pu.ppd!
    W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp950c.ppd.gz!
    W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp960s.ppd.gz!
    W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp9100.ppd.gz!
    W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp880c.ppd.gz!
    W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp980c.ppd.gz!
    W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp850c.ppd.gz!
    W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp920c.ppd.gz!
    W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp830c.ppd.gz!
    W [02/Jan/2012:19:03:42 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Brother/BR5070DN_GPL.ppd.gz!
    E [02/Jan/2012:19:03:42 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
    W [02/Jan/2012:19:03:42 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/KONICA_MINOLTA/KOC451JX.ppd.gz!
    W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Xerox/xrx6120pu.ppd!
    W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp950c.ppd.gz!
    W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp960s.ppd.gz!
    W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp9100.ppd.gz!
    W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp880c.ppd.gz!
    W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp980c.ppd.gz!
    W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp850c.ppd.gz!
    W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp920c.ppd.gz!
    W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp830c.ppd.gz!
    W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Brother/BR5070DN_GPL.ppd.gz!
    E [02/Jan/2012:19:04:46 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
    W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/KONICA_MINOLTA/KOC451JX.ppd.gz!
    W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Xerox/xrx6120pu.ppd!
    W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp950c.ppd.gz!
    W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp960s.ppd.gz!
    W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp9100.ppd.gz!
    W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp880c.ppd.gz!
    W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp980c.ppd.gz!
    W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp850c.ppd.gz!
    W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp920c.ppd.gz!
    W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp830c.ppd.gz!
    E [02/Jan/2012:19:05:17 +0100] Bad request line "%16%03%01" from localhost!
    W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Brother/BR5070DN_GPL.ppd.gz!
    E [02/Jan/2012:19:06:12 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
    W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/KONICA_MINOLTA/KOC451JX.ppd.gz!
    W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Xerox/xrx6120pu.ppd!
    W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp950c.ppd.gz!
    W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp960s.ppd.gz!
    W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp9100.ppd.gz!
    W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp880c.ppd.gz!
    W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp980c.ppd.gz!
    W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp850c.ppd.gz!
    W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp920c.ppd.gz!
    W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp830c.ppd.gz!
    E [02/Jan/2012:19:06:57 +0100] Bad request line "%16%03%01" from localhost!
    E [02/Jan/2012:19:06:58 +0100] Bad request line "%16%03%01" from localhost!
    E [02/Jan/2012:19:15:57 +0100] Avahi client failed, closing client to allow a clean restart
    W [02/Jan/2012:19:18:48 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Brother/BR5070DN_GPL.ppd.gz!
    E [02/Jan/2012:19:18:48 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
    W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/KONICA_MINOLTA/KOC451JX.ppd.gz!
    W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Xerox/xrx6120pu.ppd!
    W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp950c.ppd.gz!
    W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp960s.ppd.gz!
    W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp9100.ppd.gz!
    W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp880c.ppd.gz!
    W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp980c.ppd.gz!
    W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp850c.ppd.gz!
    W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp920c.ppd.gz!
    W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp830c.ppd.gz!
    W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Brother/BR5070DN_GPL.ppd.gz!
    E [02/Jan/2012:19:19:55 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
    W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/KONICA_MINOLTA/KOC451JX.ppd.gz!
    W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Xerox/xrx6120pu.ppd!
    W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp950c.ppd.gz!
    W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp960s.ppd.gz!
    W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp9100.ppd.gz!
    W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp880c.ppd.gz!
    W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp980c.ppd.gz!
    W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp850c.ppd.gz!
    W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp920c.ppd.gz!
    W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp830c.ppd.gz!
    E [02/Jan/2012:19:20:30 +0100] Returning IPP client-error-document-format-not-supported for Print-Job (ipp://localhost:631/printers/Epson_Stylus_SX218) from localhost
    E [02/Jan/2012:19:24:03 +0100] Returning IPP client-error-document-format-not-supported for Send-Document (ipp://localhost:631/printers/Epson_Stylus_SX218) from localhost
    Please let me know if you should need other outputs, logfiles, etc. I appreciate any idea that could help me to get this damn thing to finally print something.
    Thank you very much!

    Hi Radhakrishnan,
    ORARRP doesn't actually do any printing itself. Via COM/Active-X, it calls the appropriate program that corresponds to the type of output, and then this program does the actual printing. For PDF, it calls Acrobat Reader to print the document. Acrobat Reader displays the printer dialog to let you choose which printer to use, and then when you click OK, Acrobat Reader prints the document and sends it to the printer.
    I expect that you'll find that when you use Acrobat Reader yourself on this machine it has exactly the same problems with this particular printer configuration. If so, you'll need to contact Adobe for further assistance.
    regards,
    Stewart

  • HP 3540 AIO Printer DOESN'T PRINT BLACK TEXT!

    I unfortunately have an HP AIO Printer Deskjet 3540 Series. 
    Upon haggling wiht the abject customer tech support for an hour, he asks me to re-install the driver. After doing so, the black text JUST DOESN'T PRINT!
    Is this some kind of joke! I am going to run out of colored ink in printng the **bleep** test pages. 
    It's an absolute rip-off. No wonder people buy cheap cartridges. 

    Hi @GaurangDivecha 
    Although I would be happy to offer you some troubleshooting steps, I think it might be best to call HP.
    You are welcome to take a look at the following document to ensure you have done all the necessary troubleshooting; Printer Prints a Blank Page or Does Not Print Black or Color Ink for the HP ENVY 4500 and Deskjet In...
    If you are in Canada or US call 800 474 6836, or you can Contact HP Worldwide.
    HP printers generally have a 1 year warranty from their purchase date, you can verify the warranty using the following link if you would like; warranty check. 
    Don't hesitate to call, although the printer may be out of warranty, the cartridges could be in warranty; therefore, there wouldn't likely be a fee for the phone support. HP will, at HP's option, either replace products under warranty that prove to be defective or refund the purchase price.
    To find the “Warranty Ends” date, look in the following table for the date's location on each product. The date follows the YYYY/MM/DD or YYYY/MM format, where YYYY indicates the year, MM indicates the month, and DD indicates the day.
    I hope this helps.
      - In support of Movember
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • Printer:HP OFFICEJET 6500 E709n Series Doesn't print

    My printer, HP OFFICEJET 6500 E709n Series doesn't print. It is directly connected by a cable to the computer. When I hit the print button, there is an error message:
                   Not enough memory available
                   Check cable as this may not be properly connected
    I checked the cable, everything is okay. I rebooted several times. But it didn' work.
    Anybody can help me?
    thanks
    This question was solved.
    View Solution.

    What operating system? 
    Running the diagnostics at http://www.hp.com/go/tools may help resolve the issue.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • HP Officejet Pro 8000 Wireless - Doesn't print black

    I set up a new Officejet 8000 back in about August of 2009.  I never used it much and it looks like I have about 29 pages which have gone through it.  Now I'm trying to use it and the black doesn't print at all.  I have gone through multiple print tests, etc. and the self test even just comes up in magenta.
    The ink level on the black is about 50% so it looks like there is plenty of ink.  I have also taken the print head out and shaken it multiple times.
    I read another post that indicated these printers had problems and it sounds like a warranty replacement but it just seems awfully early to have any problems with it.  Any thoughts on how to resolve or should I just call HP? 

    i have about 11 of these crappy printers on my site, i think i have sent more back to HP than i have actively working.
    the current issue i have is also the black printing problem, its getting to the point where im considering recommending another supplier. HP's quality have gone though the floor with the recent crap they are producing..
    cartridges are fine, even though the Hp rep i spoke to blamed the issue on the cartridge, it works fine in another machine, and a new cartridge also has the same fault. the print heads are also fine & replaced & tested in a working machine, same fault. all the cleaning pages & stages made no differance.
    only solution - wave good bye and post it back to HP - yet again..
    come on HP you used to care about your products and your customers, but lately you just churn our any piece of rubbish.
    why have you let your standard slip soo far.. why dont you care about your customers anymore.

  • Adobe Reader 9.1.3 Doesn't Print on Mac 10.5.8

    I have just installed an HP Officejet Pro 8500 A909g printer.  It prints from every program I have tested, including Safari, Pages, and TextMate.  However, it does not print from Adobe Reader 9.1.3
    I am running the most current version of Leopard, have run Software Update and updated everything, and have run Check for Updates in Adobe Reader (it reports that there are no  updates available)
    I turned on debugging through cups ( http://localhost:631 ) and get the message:
    E [09/Aug/2009:09:05:12 -0700] [Job 14] pstopdffilter/pstocupsraster failed with err number 13
    D [09/Aug/2009:09:05:12 -0700] Discarding unused printer-state-changed event...
    E [09/Aug/2009:09:05:12 -0700] PID 669 (/usr/libexec/cups/filter/pstopdffilter) stopped with status 1!
    E [09/Aug/2009:09:05:15 -0700] [Job 14] can't open `/private/var/spool/cups/tmp/4a7ef3ba9b679'.
    E [09/Aug/2009:09:05:17 -0700] [Job 14] Opening Printer Connection Failed: Unable to open the printer connection. Please check your printer connections and check for printer errors.
    I am connected via wireless to the router, and then wireless from the router to the printer.  Again, every other program prints without problem, so it is not a connection problem
    I had seen a post about problems printing with Reader that suggested opening the Preview mode, and then printing from that, but when I click the Preview button, I get the message "Preview is not supported".
    My workaround (other than not using Reader!) is to click Print, then open the expanded Print Dialog (click on the little down arrow), click on Advanced..., then select "Print as image".  When I do that, it prints without problem.
    James Nachbar
    [url deleted by host]

    To clarify my previous post, I had already seen http://forums.adobe.com/message/1770581 .  I mentioned in my post that I get the message "Preview not supported" when I click the Preview button from the print dialog in Adobe Reader, and thus concluded that the "Preview" workaround discussed in that thread wasn't helping me.
    However, re-reading that post, they were talking about using the Mac "Preview" application to print the pdf file.  Like every other application (other than Reader) I have tried, the Mac's Preview application prints just fine, and is another workaround.
    The only program that doesn't print for me is Adobe Reader.
    BTW, I also have an Intel chip in my MacBook Pro.
    Re-installing Leopard, as suggested by one post in that thread, is not a reasonable option for this problem.
    In fact, since Preview allows me to view and print .pdf's , my solution is probably just going to be not to use Adobe Reader.  In fact, had I not been new to the Mac, I would have known that I didn't need Adobe Reader at all.
    However, I'm glad this happened, in the sense that I use CS3 on the PC, and had considered moving to CS4 on the Mac.  However, since Adobe apparently hasn't figured out how to get printing to work on a Mac from their flagship product (!), I will be sure to do a lot of testing of CS4 before considering buying the upgrade.

  • HP4507 all in one doesn't print

    I bought one of these before and had same problem so I sent it back. I didn't realise I had bought the same model this time. And same problem all the print set up pages and test pages are great. When I try to print from my pc or from online it doesn't print anything. It doesn't queue any jobs up. I am obviously missing something. Why is it so painfully difficult to just get the printer to do what it is supposed to do. It is wireless connected. I cant connect from a usb connection as the lead never came with the printer. which I am not happy about to start with. The printer keeps telling me to load paper but there is paper already there. Then runs through the whole set up proceedure again. Why is it doing this??. I tried the online diagnostic set up trouble shooter. but the test page started printing then after 3 lines it paused for an age I had to press back and finally it spat out the test page. Can anyone help me. its now 6 months since I printed anything from this computer. 4 printers 2 broke. I am losing the faith.  Thanks in advance

    Hi @zookeeperz, and welcome to the HP Forums!
    I see you are having issues printing.  I would like to help!
    I'd recommend starting with a power reset.  Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
    I would also recommend downloading and running the HP Print and Scan Doctor.
    Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • Brother HL-2030,USB doesn't print PDF files

    Mac OS 10.6.7. Brother HL-2030, USB connection, doesn't print any kin of PDF files, or prints with fatal errors. Printer driver Brother HL-2030 series CUPS. Adobe Reader 10.0.3. . A HP Deskjet printer, with the same connection, prints correctly. I did reinstall the system and updated it. Can you help me to fix this problem?

    Are you sure that model number is correct?
    Brother is not showing it on their support web site, but they show a firmware update and a software update from earlier this year for a similarly numbered model:
    http://welcome.solutions.brother.com/bsc/public/us/us/en/dlf/download_index.html ?reg=us&c=us&lang=en&prod=hl2230_us&dlid=&flang=English&os=94&type2=-1

  • Fillable form on iPad doesn't print from Adobe Reader. Is there a fix yet?

    I can fill in a fillable form but when I print it the filled-in text doesn't print. I just get a blank form. I'm using the latest Reader version on an iPad 2.  there a solution available yet?

    It should work with the update to Reader 10.4. "Enhaned compatibility with AirPrint means improved printing of completed forms as well as documents with comments."
    I don't have AirPrint on my printer to test. Is your printer AirPrint compatible?
    I can get it to work with Printer Pro which I'm running on my iPad.

  • LJ M127fw doesn't print with user rights

    Good afternoon.
    Printer hp lj m127fw connected via USB doesn't print with user rights in the OS Windows 7 x64. It prints only with administrator rights, although some computers print with user rights without any action. We noticed, as well, that scanning and printing pictures are always available with user rithts.

    I would suggest the following:  log on as administrator.  Click Start, Devices and Printers, right click on the Laserjet M127FW, select Printer Properties, Security.  Select Everyone and give permission for printing (and whatever else is desired), Apply.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Designjet 500 doesn't print from Windows 7 64 bits

    The problem:
    We got our first Windows 7 64 bit laptop and we can't print to our Designjet 500. Windows submits the job to the printer without errors but it doesn't print and the error 61:05 is displayed on the printer's display. The printer is connected to the network infrastructure with HP Jetdirect.
    Things I tried:
    I tried to connect this laptop directly to the printer through USB.
    I tried to print from Autocad and the Windows test page.
    I tried the Windows Update drivers and the ones provided in HP's support website.
    I tried all the different flavors of the Windows 7 64 bit drivers (w/ HPGL2 card; PS; Plus; 24/42 inches)
    I tried to print from a 2nd W7 x64 laptop that I got temporarily just to troubleshoot this issue.
    Conclusion:
    All 32 bit OS's print as expected. None of the new W7 64 bit systems print. None of the things I tried made a difference, the job is sent to the printer and the error is always the same.
    Any ideas to go on from here?

    This forum is focused on consumer level products.  For the Designjet you may have better results posting in the HP Designjet forum here.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Firefox doesn't print or open preview, when I select print preview I get the following error: Couldn't open the file. It may be corrupt or a file format that Preview doesn't recognize.

    Firefox doesn't print or open preview, when I select print preview I get the following error: Couldn’t open the file. It may be corrupt or a file format that Preview doesn’t recognize.
    However, when I print from Safari or another program, I have no problems
    == Yesterday

    The only solution to corrupted files is to restore from your back up.
    Regards
    TD

  • [SOLVED]Canon D1100 Series UFRII LT doesn't print, CUPS thinks it does

    Hello everyone,
    I have been struggling getting a network printer at work working with my laptop. I installed the driver from Canon's web site, and everything seems to be fine on my end, but the network printer doesn't print anything I give it. I can't find the issue in my log after running the following command:
    echo "This is a test. Hello world." | lpr -p
    Here's the output from the error log:
    D [30/Jan/2014:14:52:31 -0600] [Client 14] 2.0 Create-Job 2
    D [30/Jan/2014:14:52:31 -0600] Create-Job ipp://localhost:631/printers/Canon_D1150_D1170
    D [30/Jan/2014:14:52:31 -0600] cupsdMarkDirty(---J-)
    D [30/Jan/2014:14:52:31 -0600] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients"
    D [30/Jan/2014:14:52:31 -0600] add_job: requesting-user-name="yaro"
    I [30/Jan/2014:14:52:31 -0600] [Job 15] Adding start banner page "none".
    D [30/Jan/2014:14:52:31 -0600] Discarding unused job-created event...
    I [30/Jan/2014:14:52:31 -0600] [Job 15] Queued on "Canon_D1150_D1170" by "yaro".
    D [30/Jan/2014:14:52:31 -0600] [Client 14] Returning IPP successful-ok for Create-Job (ipp://localhost:631/printers/Canon_D1150_D1170) from localhost
    D [30/Jan/2014:14:52:31 -0600] [Client 14] Content-Length: 179
    D [30/Jan/2014:14:52:31 -0600] [Client 14] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=179, response=0x7f8adff8f1e0(IPP_IDLE), pipe_pid=0, file=-1
    D [30/Jan/2014:14:52:31 -0600] [Client 14] Writing IPP response, ipp_state=DATA, old wused=0, new wused=0
    D [30/Jan/2014:14:52:31 -0600] [Client 14] bytes=0, http_state=0, data_remaining=0
    D [30/Jan/2014:14:52:31 -0600] [Client 14] Waiting for request.
    D [30/Jan/2014:14:52:31 -0600] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
    D [30/Jan/2014:14:52:31 -0600] [Client 14] POST /printers/Canon_D1150_D1170 HTTP/1.1
    D [30/Jan/2014:14:52:31 -0600] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
    D [30/Jan/2014:14:52:31 -0600] [Client 14] No authentication data provided.
    D [30/Jan/2014:14:52:31 -0600] [Client 14] 2.0 Send-Document 3
    D [30/Jan/2014:14:52:31 -0600] Send-Document ipp://localhost:631/printers/Canon_D1150_D1170
    D [30/Jan/2014:14:52:31 -0600] cupsdIsAuthorized: requesting-user-name="yaro"
    D [30/Jan/2014:14:52:31 -0600] [Job 15] Auto-typing file...
    D [30/Jan/2014:14:52:31 -0600] [Job 15] Request file type is text/plain.
    D [30/Jan/2014:14:52:31 -0600] cupsdMarkDirty(---J-)
    D [30/Jan/2014:14:52:31 -0600] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
    I [30/Jan/2014:14:52:31 -0600] [Job 15] File of type text/plain queued by "yaro".
    I [30/Jan/2014:14:52:31 -0600] [Job 15] Adding end banner page "none".
    D [30/Jan/2014:14:52:31 -0600] cupsdMarkDirty(---J-)
    D [30/Jan/2014:14:52:31 -0600] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
    D [30/Jan/2014:14:52:31 -0600] [Job 15] time-at-processing=1391115151
    D [30/Jan/2014:14:52:31 -0600] cupsdMarkDirty(---J-)
    D [30/Jan/2014:14:52:31 -0600] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
    D [30/Jan/2014:14:52:31 -0600] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
    D [30/Jan/2014:14:52:31 -0600] Discarding unused printer-state-changed event...
    D [30/Jan/2014:14:52:31 -0600] [Job 15] 4 filters for job:
    D [30/Jan/2014:14:52:31 -0600] [Job 15] texttopdf (text/plain to application/pdf, cost 32)
    D [30/Jan/2014:14:52:31 -0600] [Job 15] pdftopdf (application/pdf to application/vnd.cups-pdf, cost 66)
    D [30/Jan/2014:14:52:31 -0600] [Job 15] pdftops (application/vnd.cups-pdf to application/vnd.cups-postscript, cost 100)
    D [30/Jan/2014:14:52:31 -0600] [Job 15] pstoufr2cpca (application/vnd.cups-postscript to printer/Canon_D1150_D1170, cost 0)
    D [30/Jan/2014:14:52:31 -0600] [Job 15] job-sheets=none,none
    D [30/Jan/2014:14:52:31 -0600] [Job 15] argv[0]="Canon_D1150_D1170"
    D [30/Jan/2014:14:52:31 -0600] [Job 15] argv[1]="15"
    D [30/Jan/2014:14:52:31 -0600] [Job 15] argv[2]="yaro"
    D [30/Jan/2014:14:52:31 -0600] [Job 15] argv[3]="(stdin)"
    D [30/Jan/2014:14:52:31 -0600] [Job 15] argv[4]="1"
    D [30/Jan/2014:14:52:31 -0600] [Job 15] argv[5]="finishings=3 number-up=1 prettyprint job-uuid=urn:uuid:9566668d-244b-32ad-4b26-afeeb081bd7f job-originating-host-name=localhost time-at-creation=1391115151 time-at-processing=1391115151"
    D [30/Jan/2014:14:52:31 -0600] [Job 15] argv[6]="/var/spool/cups/d00015-001"
    D [30/Jan/2014:14:52:31 -0600] [Job 15] envp[0]="CUPS_CACHEDIR=/var/cache/cups"
    D [30/Jan/2014:14:52:31 -0600] [Job 15] envp[1]="CUPS_DATADIR=/usr/share/cups"
    D [30/Jan/2014:14:52:31 -0600] [Job 15] envp[2]="CUPS_DOCROOT=/usr/share/cups/doc"
    D [30/Jan/2014:14:52:31 -0600] [Job 15] envp[3]="CUPS_FONTPATH=/usr/share/cups/fonts"
    D [30/Jan/2014:14:52:31 -0600] [Job 15] envp[4]="CUPS_REQUESTROOT=/var/spool/cups"
    D [30/Jan/2014:14:52:31 -0600] [Job 15] envp[5]="CUPS_SERVERBIN=/usr/lib/cups"
    D [30/Jan/2014:14:52:31 -0600] [Job 15] envp[6]="CUPS_SERVERROOT=/etc/cups"
    D [30/Jan/2014:14:52:31 -0600] [Job 15] envp[7]="CUPS_STATEDIR=/run/cups"
    D [30/Jan/2014:14:52:31 -0600] [Job 15] envp[8]="HOME=/var/spool/cups/tmp"
    D [30/Jan/2014:14:52:31 -0600] [Job 15] envp[9]="PATH=/usr/lib/cups/filter:/usr/bin:/usr/bin:/bin:/usr/bin"
    D [30/Jan/2014:14:52:31 -0600] [Job 15] envp[10]="SERVER_ADMIN=root@spike"
    D [30/Jan/2014:14:52:31 -0600] [Job 15] envp[11]="SOFTWARE=CUPS/1.7.1"
    D [30/Jan/2014:14:52:31 -0600] [Job 15] envp[12]="TMPDIR=/var/spool/cups/tmp"
    D [30/Jan/2014:14:52:31 -0600] [Job 15] envp[13]="USER=root"
    D [30/Jan/2014:14:52:31 -0600] [Job 15] envp[14]="CUPS_MAX_MESSAGE=2047"
    D [30/Jan/2014:14:52:31 -0600] [Job 15] envp[15]="CUPS_SERVER=/run/cups/cups.sock"
    D [30/Jan/2014:14:52:31 -0600] [Job 15] envp[16]="CUPS_ENCRYPTION=IfRequested"
    D [30/Jan/2014:14:52:31 -0600] [Job 15] envp[17]="IPP_PORT=631"
    D [30/Jan/2014:14:52:31 -0600] [Job 15] envp[18]="CHARSET=utf-8"
    D [30/Jan/2014:14:52:31 -0600] [Job 15] envp[19]="LANG=en.UTF-8"
    D [30/Jan/2014:14:52:31 -0600] [Job 15] envp[20]="PPD=/etc/cups/ppd/Canon_D1150_D1170.ppd"
    D [30/Jan/2014:14:52:31 -0600] [Job 15] envp[21]="RIP_MAX_CACHE=128m"
    D [30/Jan/2014:14:52:31 -0600] [Job 15] envp[22]="CONTENT_TYPE=text/plain"
    D [30/Jan/2014:14:52:31 -0600] [Job 15] envp[23]="DEVICE_URI=socket://192.168.2.51"
    D [30/Jan/2014:14:52:31 -0600] [Job 15] envp[24]="PRINTER_INFO=Canon D1150/D1170"
    D [30/Jan/2014:14:52:31 -0600] [Job 15] envp[25]="PRINTER_LOCATION="
    D [30/Jan/2014:14:52:31 -0600] [Job 15] envp[26]="PRINTER=Canon_D1150_D1170"
    D [30/Jan/2014:14:52:31 -0600] [Job 15] envp[27]="PRINTER_STATE_REASONS=none"
    D [30/Jan/2014:14:52:31 -0600] [Job 15] envp[28]="CUPS_FILETYPE=document"
    D [30/Jan/2014:14:52:31 -0600] [Job 15] envp[29]="FINAL_CONTENT_TYPE=printer/Canon_D1150_D1170"
    D [30/Jan/2014:14:52:31 -0600] [Job 15] envp[30]="AUTH_I****"
    I [30/Jan/2014:14:52:31 -0600] [Job 15] Started filter /usr/lib/cups/filter/texttopdf (PID 5140)
    I [30/Jan/2014:14:52:31 -0600] [Job 15] Started filter /usr/lib/cups/filter/pdftopdf (PID 5141)
    I [30/Jan/2014:14:52:31 -0600] [Job 15] Started filter /usr/lib/cups/filter/pdftops (PID 5142)
    I [30/Jan/2014:14:52:31 -0600] [Job 15] Started filter /usr/lib/cups/filter/pstoufr2cpca (PID 5143)
    I [30/Jan/2014:14:52:31 -0600] [Job 15] Started backend /usr/lib/cups/backend/socket (PID 5144)
    D [30/Jan/2014:14:52:31 -0600] Discarding unused job-state-changed event...
    D [30/Jan/2014:14:52:31 -0600] [Client 14] Returning IPP successful-ok for Send-Document (ipp://localhost:631/printers/Canon_D1150_D1170) from localhost
    D [30/Jan/2014:14:52:31 -0600] [Client 14] Content-Length: 171
    D [30/Jan/2014:14:52:31 -0600] [Client 14] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=171, response=0x7f8adff825e0(IPP_IDLE), pipe_pid=0, file=-1
    D [30/Jan/2014:14:52:31 -0600] [Client 14] Writing IPP response, ipp_state=DATA, old wused=0, new wused=0
    D [30/Jan/2014:14:52:31 -0600] [Client 14] bytes=0, http_state=0, data_remaining=0
    D [30/Jan/2014:14:52:31 -0600] [Client 14] Waiting for request.
    D [30/Jan/2014:14:52:31 -0600] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients and dirty files"
    D [30/Jan/2014:14:52:31 -0600] [Client 14] HTTP_STATE_WAITING Closing on EOF
    D [30/Jan/2014:14:52:31 -0600] [Client 14] Closing connection.
    D [30/Jan/2014:14:52:31 -0600] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
    D [30/Jan/2014:14:52:31 -0600] [Job 15] Page = 612x792; 14,14 to 598,778
    D [30/Jan/2014:14:52:31 -0600] [Job 15] STATE: +connecting-to-device
    D [30/Jan/2014:14:52:31 -0600] cupsdMarkDirty(---J-)
    D [30/Jan/2014:14:52:31 -0600] cupsdSetBusyState: newbusy="Dirty files", busy="Printing jobs and dirty files"
    D [30/Jan/2014:14:52:31 -0600] [Job 15] Looking up "192.168.2.51"...
    D [30/Jan/2014:14:52:31 -0600] [Job 15] pstoufr2cpca start.
    D [30/Jan/2014:14:52:31 -0600] Discarding unused printer-state-changed event...
    D [30/Jan/2014:14:52:31 -0600] [Job 15] pdftops - copying to temp print file "/var/spool/cups/tmp/0141652eb6fae"
    D [30/Jan/2014:14:52:31 -0600] [Job 15] prtGeneralCurrentLocalization type is 5, expected 2!
    D [30/Jan/2014:14:52:31 -0600] [Job 15] backendWaitLoop(snmp_fd=5, addr=0x7f63fcee8c88, side_cb=0x7f63fb5631e0)
    D [30/Jan/2014:14:52:31 -0600] [Job 15] PID 5140 (/usr/lib/cups/filter/texttopdf) exited with no errors.
    D [30/Jan/2014:14:52:31 -0600] [Job 15] PID 5141 (/usr/lib/cups/filter/pdftopdf) exited with no errors.
    D [30/Jan/2014:14:52:31 -0600] [Job 15] Printer make and model: Canon d1100
    D [30/Jan/2014:14:52:31 -0600] [Job 15] Using image rendering resolution 600 dpi
    D [30/Jan/2014:14:52:31 -0600] [Job 15] Started filter gs (PID 5149)
    D [30/Jan/2014:14:52:31 -0600] [Job 15] Started filter pstops (PID 5150)
    D [30/Jan/2014:14:52:31 -0600] [Job 15] Page = 612x792; 14,14 to 598,778
    D [30/Jan/2014:14:52:31 -0600] [Job 15] slow_collate=0, slow_duplex=0, slow_order=0
    D [30/Jan/2014:14:52:31 -0600] [Job 15] Before copy_comments - %!PS-Adobe-3.0
    D [30/Jan/2014:14:52:31 -0600] [Job 15] %!PS-Adobe-3.0
    D [30/Jan/2014:14:52:31 -0600] [Job 15] %%BoundingBox: 0 0 612 792
    D [30/Jan/2014:14:52:31 -0600] [Job 15] %%HiResBoundingBox: 0 0 612.00 792.00
    D [30/Jan/2014:14:52:31 -0600] [Job 15] %%Creator: GPL Ghostscript 910 (ps2write)
    D [30/Jan/2014:14:52:31 -0600] [Job 15] %%LanguageLevel: 2
    D [30/Jan/2014:14:52:31 -0600] [Job 15] %%CreationDate: D:20140130145231-06'00'
    D [30/Jan/2014:14:52:31 -0600] [Job 15] %%Pages: 1
    D [30/Jan/2014:14:52:31 -0600] [Job 15] %%EndComments
    D [30/Jan/2014:14:52:31 -0600] [Job 15] Before copy_prolog - %%BeginProlog
    D [30/Jan/2014:14:52:31 -0600] [Job 15] Before copy_setup - %%Page: 1 1
    D [30/Jan/2014:14:52:31 -0600] [Job 15] Before page loop - %%Page: 1 1
    D [30/Jan/2014:14:52:31 -0600] [Job 15] Copying page 1...
    D [30/Jan/2014:14:52:31 -0600] [Job 15] pagew = 583.7, pagel = 763.7
    D [30/Jan/2014:14:52:31 -0600] [Job 15] bboxx = 0, bboxy = 0, bboxw = 612, bboxl = 792
    D [30/Jan/2014:14:52:31 -0600] [Job 15] PageLeft = 14.2, PageRight = 597.8
    D [30/Jan/2014:14:52:31 -0600] [Job 15] PageTop = 777.8, PageBottom = 14.2
    D [30/Jan/2014:14:52:31 -0600] [Job 15] PageWidth = 612.0, PageLength = 792.0
    D [30/Jan/2014:14:52:31 -0600] [Job 15] Wrote 1 pages...
    D [30/Jan/2014:14:52:31 -0600] [Job 15] PID 5150 (pstops) exited with no errors.
    D [30/Jan/2014:14:52:31 -0600] [Job 15] PID 5149 (gs) exited with no errors.
    D [30/Jan/2014:14:52:31 -0600] [Job 15] PID 5142 (/usr/lib/cups/filter/pdftops) exited with no errors.
    D [30/Jan/2014:14:52:31 -0600] [Job 15] opvpOpenPrinter(410)
    D [30/Jan/2014:14:52:31 -0600] [Job 15] CStubOpenPrinter(349)
    D [30/Jan/2014:14:52:31 -0600] [Job 15] Error Response:ReqNo=0, SeqNo=1,opvpErrorNo=-1
    D [30/Jan/2014:14:52:31 -0600] [Job 15] Connecting to 192.168.2.51:9100
    I [30/Jan/2014:14:52:31 -0600] [Job 15] Connecting to printer.
    D [30/Jan/2014:14:52:31 -0600] cupsdMarkDirty(---J-)
    D [30/Jan/2014:14:52:31 -0600] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
    D [30/Jan/2014:14:52:31 -0600] [Job 15] Set job-printer-state-message to "Connecting to printer.", current level=INFO
    D [30/Jan/2014:14:52:31 -0600] Discarding unused job-progress event...
    D [30/Jan/2014:14:52:31 -0600] Discarding unused printer-state-changed event...
    D [30/Jan/2014:14:52:31 -0600] [Job 15] STATE: -connecting-to-device
    D [30/Jan/2014:14:52:31 -0600] cupsdMarkDirty(---J-)
    D [30/Jan/2014:14:52:31 -0600] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Dirty files"
    D [30/Jan/2014:14:52:31 -0600] Discarding unused printer-state-changed event...
    I [30/Jan/2014:14:52:31 -0600] [Job 15] Connected to printer.
    D [30/Jan/2014:14:52:31 -0600] cupsdMarkDirty(---J-)
    D [30/Jan/2014:14:52:31 -0600] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
    D [30/Jan/2014:14:52:31 -0600] [Job 15] Set job-printer-state-message to "Connected to printer.", current level=INFO
    D [30/Jan/2014:14:52:31 -0600] [Job 15] Connected to 192.168.2.51:9100...
    D [30/Jan/2014:14:52:31 -0600] [Job 15] backendRunLoop(print_fd=0, device_fd=6, snmp_fd=5, addr=0x7f63fcee8c88, use_bc=1, side_cb=0x7f63fb5631e0)
    D [30/Jan/2014:14:52:31 -0600] Discarding unused job-progress event...
    D [30/Jan/2014:14:52:31 -0600] Discarding unused printer-state-changed event...
    D [30/Jan/2014:14:52:31 -0600] [Job 15] PID 5143 (/usr/lib/cups/filter/pstoufr2cpca) did not catch or ignore signal 13.
    I [30/Jan/2014:14:52:31 -0600] [Job 15] Waiting for printer to finish.
    D [30/Jan/2014:14:52:31 -0600] cupsdMarkDirty(---J-)
    D [30/Jan/2014:14:52:31 -0600] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
    D [30/Jan/2014:14:52:31 -0600] [Job 15] Set job-printer-state-message to "Waiting for printer to finish.", current level=INFO
    D [30/Jan/2014:14:52:31 -0600] Discarding unused job-progress event...
    D [30/Jan/2014:14:52:31 -0600] Discarding unused printer-state-changed event...
    D [30/Jan/2014:14:52:31 -0600] [Job 15] PID 5144 (/usr/lib/cups/backend/socket) exited with no errors.
    D [30/Jan/2014:14:52:31 -0600] [Job 15] time-at-completed=1391115151
    D [30/Jan/2014:14:52:31 -0600] Discarding unused job-completed event...
    I [30/Jan/2014:14:52:31 -0600] [Job 15] Job completed.
    D [30/Jan/2014:14:52:31 -0600] cupsdMarkDirty(---J-)
    D [30/Jan/2014:14:52:31 -0600] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
    D [30/Jan/2014:14:52:31 -0600] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
    D [30/Jan/2014:14:52:31 -0600] Discarding unused printer-state-changed event...
    D [30/Jan/2014:14:52:31 -0600] cupsdMarkDirty(---J-)
    D [30/Jan/2014:14:52:31 -0600] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
    D [30/Jan/2014:14:52:32 -0600] [Job 15] Unloading...
    I [30/Jan/2014:14:53:02 -0600] Saving job.cache...
    D [30/Jan/2014:14:53:02 -0600] cupsdSetBusyState: newbusy="Not busy", busy="Printing jobs and dirty files"
    D [30/Jan/2014:14:53:02 -0600] Report: clients=0
    D [30/Jan/2014:14:53:02 -0600] Report: jobs=8
    D [30/Jan/2014:14:53:02 -0600] Report: jobs-active=0
    D [30/Jan/2014:14:53:02 -0600] Report: printers=1
    D [30/Jan/2014:14:53:02 -0600] Report: stringpool-string-count=2756
    D [30/Jan/2014:14:53:02 -0600] Report: stringpool-alloc-bytes=8744
    D [30/Jan/2014:14:53:02 -0600] Report: stringpool-total-bytes=49520
    I believe this is all the relevant information from the log. I've not had any success finding this issue in the wiki or in the forums. Google's turned up no help. I'd really like getting this printer to work. Any help would be greatly appreciated.
    Last edited by Yaro (2014-02-25 19:44:17)

    I can't find that printer on the canon eu support website (canon uses model numbers on that site, not series designations) , and canon printers are not easy to get to work well on archlinux.
    However there are 2 aur packages that provide the UFRII driver :
    - cndrvcups-lb (built from source)
    - cndrvcups-lb-bin (uses the binaries)

  • HP Laserjet PRO MFP125nw doesn't print Microsoft Word documents from PC

    Hello.
    I've recently bought a brand new HP Laserjet PRO MFP125nw printer. The functions seemed really nice and the price was acceptable. I've brought it to my home, installed it following the manual, connected it to Wi-Fi etc. It generally works fairly well. PDF files are printed perfectly well, the scaning function works and it's generally a nice piece of technology.
    The only problem is that it just doesn't want to pring Microsoft Word documents from my PC. It prints it perfectly when I try to print .docx from my smartphone using the app, but it doesn't respond when I try doing it from the PC.
    My Office version is 2007 Enterprise. Do you have any idea what I should do?
    Thank you in advance

    Thank you a lot for a quick reply, Cbert. It's fantastic to see HP actually reading their forums and trying to help!
    I'll try plugging it into the wall and directly to the PC with a USB, we'll see if it works out.
    About Word, i've already tried reinstalling Word, even installed a 2003 version to check if it works with that. Well it doesn't. And as i've written before, I tried turning some .docx files to .pdf using a converter, but it still doesn't print them.
    Anyway, i'll try the first two points and keep you updated, thanks!

  • HP Officejet Pro 8500 A909a_ Scan with HP Solution Center doesn't work

    Hallo.
    My name is Michele.
    I can't use  HP Solution Center for scanning with my HP Officejet Pro 8500 A909a (I have windows 7 O.S.) because, when I click on "Scan document" , a white error windows appears and says"Necessary Component is not founded or not correctly installed. Install again HP Photosmart software" . I uninstalled and installed again the software but it doesn't work. Previously it worked with XP. Recently I've updated XP with Windows 7 and I found HP Solution Center doesn't work. Perhaps it doesn't match with Win 7?
    Thank you to everyone who wants help me
    This question was solved.
    View Solution.

    Hi Folks,
    I appreciate the time you have taken trying to resolve this issue. I was able to do some more research, and found a helpful solution, please click on the link below to get started:
    The HP imaging device was not found... -Error popup
    Please try the recommendation and let me know the outcome.
    Thanks,
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Maybe you are looking for