Solution manager optimizer configuration
hi
I am in solution manager 4.0 optimizer configuration step here i face an error when i type the t code solution_manager it displays the appropriate screen then i click on new button
here i entered the
solution name sandbox landscape
language english
then when i click on continue button here nothing is happening actually it has to go to the next screen but the screen stands as if, nothing is happening no reponse at all
support pack updated to stack 09
internet explorer 7 version is installed and all prerequisite is done
please help me
regards
senthil
Hi,
Can you tell what the error is? I may be able to help you.
Amol
Similar Messages
-
Sap solution manager optimizer configuration error
Dear Receipient
I have installed solution manager 4.0, patch is updated upto the level of optimizer configuration. I have configured sap router on the same solution manager machine.
now i am in solution manager optimizer configuration in that i am doing it with an user of having sap_all rights
in t code sm59 -> sap-oss connection test is good
now through t code solution_manager i have created an new active solution of sandbox land scape and through t code smsy i have created an logical component of sap ecc and i have added the user basis which iam using for soman optimizer configuration thru t code aisuser
but now if i go to t code solution_manager if i click on sandbox landscape -> change management -> support packs -> then click on maintenance optimizer it shows as no system
and also in product version also no available its showing
i dont know where i went wrong in my solman optimizer configuration
pls help me
regards
senthilHi,
Please follow the SAP Tutor to setup maintenance optimizer:
http://service.sap.com/solman-mopz
-> "SAP Tutor on Maintenance Optimizer " under the section
"Additional information on Maintenance Optimizer"
Best regards,
Warren -
Hi All,
I have applied latest patches to Solution Manager,I want to configure the Optimizer. The document which i have is not latest.
Please provide me the link to get the newest document to configure the Optimizer.
Thanks,
Prashant.Try this link, it has a step-by-step instructions...
https://websmp202.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000633637&
You have to click <b>Technology Consultant & System Administrator</b> under <b>Technical Roles</b>
regards
tamilboy
Message was edited by:
tamilboy -
Solution Manager Charm configuration
Hi @all,
I´am using SAP Solution Manager 7.0 SP 15. Configurated all Charm Steps successfully.
The SAP Solutoin Manager - Scenario- Specific Settings - Change Management - Extended Configuration -Checks - Execute Check Report is green
I can´t open any hance cycle in solar_project_admin - System Landscape - Change Requests , Create Task List, I get the result "project is not released. hance cycle can not be created".
If i click "check", there are three errors:
Message from function module /TMWFLOW/CALC_SINGLE_TRACK: No source system
(Message no. /TMWFLOW/TRACK_N103)
No track for project DF_WART_01 with log. system A36/200
(Message no. /TMWFLOW/CM_CHECK038)
CTS projects in production systems for project DF_WART_01
(Message no. /TMWFLOW/TASKLIST190)
System change options are empty.
In my authorized Change Requests - related documents (next document). i get "there are no actions in the Worklist"
i´ve no idea where my fault is. I hope you can help me.
Please suggest.
Best Regards
DanielNow I have created a new maintenance project, I´ve configured everything, when I check it, I get two errors:
No consolidation system found for A36-200 (project DF_SOLMAN1)
Message no. /TMWFLOW/TRACK_N806
No track for project DF_SOLMAN1 with log. system A36/200
Message no. /TMWFLOW/CM_CHECK038
I noticed that this thread is pretty old already but I bumped into similar error messages and in the end it was caused by a TMS route configuration that didn't match the configuration of the logical component that was in use.
You can pretty easily verify this through SMSY. Navigate to your logical component there, select the line of the system assignment and click on Shipment Routes button. If you get an empty screen back, then your TMS transport route configuration doesn't match your logical component configuration.
For example, you've got DEV 100 - DEV 200 - PRD 100 for a CHARM demo landscape. If your TMS transport route configuration matches this but your logical component has DEV 100 assigned as Quality Assurance, then your configuration check for CHARM will fail because there is a mismatch.
When your configuration is correct, so both your TMS transport route as your Logical Component (system role assignment), then you should get a transport route configuration back (visible) after clicking Shipment Routes. -
Solution Manager - initial configuration
Lance,
I apologize before hand, I think I am missing something simple or I am clueless right now, Here is my situation-
I am walking through the IMG steps of setting up solution Manager. I already in have in place the SNC SAProuter connection operational to SAP.
SAPOSS connection is confirmed working.
I have gone to Tx DSWP, maintained the S- user for SAP support, and it connects and logs on, also re-entered the password and saved it to make sure it is working.
I have made sure the user I am using has the sap_suppdesk_admin role
When I go to SPRO and select initial configuration, it creates the admin and communication users, however when I put in the S-ID which I have it comes back with the following error message
error creating communication to SAP Service and Support
If I go to Tx SLG1, I get the error below
"read the documentation about the function module" SR (RFC Utilities)
Now I have done the same steps in client 001 and 100 which I created from 000 and user auth from 001.
I am just not able to get it to connect, the one thing I know is when I go to Tx AISUSER, I can put in a user but no contact person (s-id), I see a no. of posts in the forum about this but I do not believe thats my issue as that step is a 2 or 3 items below where I am right now.
i have the latest patches ST 400 0011
any ideas welcomeE::000 basically means that the system is trying to show an error message "000" from a specific error message set.This problem is caused by a program error. If the authorization check fails, no relevant error message is displayed.
have you created any system by the name SM1 in SMSY?
Regards,
Rajeev -
Solution Manager Optimizer mainance
Hi
I am trying to setup optimizer in solution manager.
I am getting the error
No destination for SAP customer number 2354460
Message Number: AISDK_SP_MESSAGES056
Diagnosis
Searching for an RFC destination of the form
SM_SP_0001234567
where 0001234567 is the SAP customer number with leading zeros
it is allowing me to download kernel , but not support patches.
what could be the problem in setting?I tried after removeing the custmor no , it is giving error
No customer numbers in transaction AISUSER
You don't need to remove anything... just add the user in AISUSER.
Regards
Juan -
Solution manager charm configure
hello everyone
i want to configure the charM scope with our R3 and BW at two domain .
R3 landscape
DEV(101sandbox,201-develop,301-customizing ,800unit testing)
QAS(800- testing)
PRD(800-prduct)
tranport from DEV TO QAS and delivery to PRD ,also you can export the object from QAS to PRD for special .
domain controller is PRD
BW landscape BWD(client 100)--BWQ(client 880)BWP(client 880)
domain controller is BWP
if we use the charM for manager the change requst ,how we configure in all system for prepare the charM like the stms configure .
we notice our test system and prd system have same client number ,so it is ok for configure ?
expect your help!
thanks a lot!
frankHi,
1 QAS client and PRD client can be the same(need not to be different).
2. Make sure that the system landscape you mention under system landscape tab of SOLAR_PROJECT_ADMIN should match with TMS configuration of Solution Manager.(This is very important).
You should create a maintenance project with system landscape DEV-201->QAS-200->PRD-200 using SOLAR_PROJECT_ADMIN. Repeat this step for BW also.
You need to configure TMS of Solution Manager in Client 000 as follows:
SLM->DEV-201->(Consolidation Route)QAS-200->(Delivery Route)PRD-200
SLM->BW-100->(Consolidation Route)BW-880->(Delivery Route)BW-880
No more document is required better than SPRO. Just follow this SPRO path to configure TMS:
SPRO->SAP Solution Manager->Configuration->Scenario-Specific Settings->Change Management
->Change Request Management->Standard Configuration->Transport Management System(Read IMG activity of each step).
Let me know if you have aby issues.
Regards,
Sanjai -
Is there any service desk guide for Solution Manager 7 configuration?
Dear Sir:
I would like to configure the service desk of solution manager 7.
but all i found documents are for solution manager 4.
the IMG setting and other steps are quite different...
wondering is there any new guide or step by step documents for specific solution manager 7?
Regards
Jack Leehi,
There is no direct document which is that much specific
Have you checked this document
https://websmp101.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000722612&_OBJECT=011000358700000122472008E
U can follow the steps and if u dont find any node u cn search in SPRO
in solman 7 mainly all the activities are under the node SPRO->scenario-specific->service desk
rest check this
Service Desk: Support team determination
/people/dolores.correa/blog/2007/10/06/service-desk-support-team-determination
Service Desk Implementation Guide
/people/bruyneel.guillaume/blog/2008/05/02/service-desk-implementation-guide-part-i
/people/bruyneel.guillaume/blog/2008/06/13/service-desk-implementation-guide-part-ii
Hope it helps,
Regards
Prakhar -
Error in Solution Manager Optimizer after support packages
HI all,
after patching my SAP Solution Manager from SP18 to SP25, MOPZ doesn't work because there is this error in web page:
Error when processing your request
What has happened?
The URL http://<fqdn>:<port>/sap/bc/webdynpro/sap/wda_mopz_plan/ was not called due to an error.
Note
■The following error text was processed in the system SLM : CREATE OBJECT: The class \CLASS=/1WDA/L0STANDARD\CLASS=CL_LINK_CHOICE was not found.
■The error occurred on the application server srvslm_SLM_00 and in the work process 0 .
■The termination type was: RABAX_STATE
■The ABAP call stack was:
Method: CREATE_BY_VIEW_ELEMENT of program CL_WDR_VIEW_ELEMENT_ADAPTER===CP
I've found that web dynpro WDC_MOPZ_CORE has a syntax error if a try to generate it.
The error is:
Web Dynpro Comp. / Intf. WDC_MOPZ_CORE,Web Dynpro Component Controller COMPONENTCONTROLLER
Method ADJUST_XML
Method "ADJUST_STACK_XML" is unknown or PROTECTED or PRIVATE.
Here the ABAP codes:
method ADJUST_XML .
DATA lv_editable TYPE abap_bool.
wd_this->mo_controller->crm_adapter->is_editable(
IMPORTING ev_is_editable = lv_editable
CHECK lv_editable eq abap_true.
call method wd_this->mo_xml_manager->adjust_stack_xml.
endmethod.
There are no inactive objects as described in oss notes and I've tried to apply also notes 1548530 & 1485385 but with no luck.
Could you help me ?
Thanks
Maurizio ManeraHello Mr Manera,
It is a known issue that the activating errors or issues with the objects in the common correction notes happen when the upgrade is done to SP23, notes applied, then upgrade again to SP25 or SP26.
The usual way to deal with this kind of error is running SPAU, letting the note go into an inconsistent state, then applying again the new version of the note. This may require to completely deimplement the common correction notes then implement them again.
Have you tried doing this?
Best regards,
Miguel Ariñ -
Earllywatchreport - Solution Manager Diagnostics Configuration
Hi gurus,
under "4.3 solutionmanager configuration", i got::
The number of Background Work processes for BI could not be checked from 'ABAP Host=xxx, old invalid hostname - source of systemcopy. Please advise, which setting is to update to avoid this message ?
Thanks a lot in advance
ThomasHi Thomas,
Try the following:
1. Check the if password is correct in Visual Admin Tool -> JCO RFC Provider then the Webadmin one.
2. Check the user definition for BI-user and BI-Admin referring to the following documentation.
https://service.sap.com/diagnostics
-> 'User Administration Guide'
-> Chapter 2.3.5 and 2.3.6
After correcting 1 and 2, please run the 'Managed System Configuration' for the managed system.
Regards,
Allam -
Solution Manager (SP 10) Maintanence Optimizer
Hi,
While configuring the Maintenance Optimizer, using the Activity "Activate Integration with Change Request Management" In the 1st activity list "Activate Change Request and Set - up Client by mistake i entered the wrong client id, and now it just doesnt let me change it.
Is there anyway that I can change it?
Also when I click on Maintanence Optimzer button, in Support Package and Stack Inbox I get the following error " Local logical system is not defined ". What does it mean? Is it because of the wrong client ID that i mentioned about above?
Any help on this will be much appriciated.
Thanks,
VikramTranscation SPRO
IMG Activity -> Sap Solution Manager -> Initial Configuration ->
Solution Manager - > General Configuration -> Maintain Logical Systems
Define Logical System
Add a unique ID and some name, then assign this logical system to the client you are using for Optimizer in the "Assign client to System.
I would suggest that you also do all the initial IMG activity step by step. -
Maintenance Optimizer in SAP Solution Manager
what is Maintenance Optimizer in SAP Solution Manager and what are its benefits
Hi
even this may be useful
Ensure your Solution manager system is at the most recent Support Package Level, specifically ST 400 Patch 11, to reduce note application time
Download from oss most recent step-by-step setup guide
Oss note 1024932
Oss Note 1008717 ( N/A )
Relevant up to SP11 for Basis 700
OSS Note 950975 support for IE7 ( N/A we are using GUI)
Oss note 975510 corrections for snote ( Via OSS not snote )
Oss note 1004691 corrections for snote *** Corrections for 975510 ( UP TO SAP_BASIS 11 ) N/A
Common problem notes, but not critical for Maint Opt
0998987: Maintenance Optimizer: Empty error messages
1022072: Maintenance Optimizer: "No Data Available" message o See note 1025381 before applying 1022072.
1020789: Maintenance Optimizer: Allow all systems to be selected
1020802: Maintenance Optimizer List displays incomplete data
1024105: Maintenance Optimizer: two "Cancel" buttons
1025381: Maintenance Optimizer: Link to additional download files
1029453: Maintenance Optimizer - Wrong status displayed
1030405: Maintenance Optimizer: Browser opens in background
1030498: Maintenance Optimizer - IBase is not active
1032463: Maintenance Optimizer: Internet Explorer Script Error
1042704: Maintenance Optimizer: Display only employee partners
Partner Scenario SOLMAN4.0 Only
Os note 1021275 ( RFC Destinations ) N/A ST 400 11
Oss Note: 997780 ( N/A we are at 11 use note 939897 for ST400 SP11 Application )
Relevant for ST400 SP09 ( N/A ST 400 11 )
User:
To setup you must have SAP_ALL
General Users: ( Oss note 1032322 )
Must be assigned to role SAP_MAINT_OPT_ADMIN
Auth Object: D_SOL_VSBL ( visibility of solutions)
Auth Object: CRM_ORD_PR ( for CRM stuff )
/spro
As of Support Package level ST 400 SP10:
Call Transaction SPRO -> SAP Reference IMG ->SAP Solution Manager -> Advanced Configuration -> Basic Settings -> SAP Solution Manager System -> Change Management -> Set Up Maintenance Optimizer
This IMG activity refers to the SAP Note 990534: Solution Manager Maintenance Optimizer: BC Set. Follow the instructions in this SAP Note
N/A as of ST400 SP11
Define a Solution:
Solution_Manager Select Solution Overview New.
Enter Descriptive Name ( Ex. GTS Landscape )
Hit Continue
Select Solution Landscape Maintenance
Select System Groups & Logical Components on the Left hand Side
Select Solution Landscapes and pick the one you created
Define the solutions for that landscape
Highlight each item and click Logical Component (You must have a valid license to set this up)
Assign S-User
Transaction: AISUSER
Enter you user id and your SUSER ID for downloading
Create another SAPOSS Connection called SAP-OSS with S-User assigned
Call SOLUTION_MANAGER
Select Solution Overview
Select the solution you want to work with
Select Change Management Support Package Stacks
Click Maintenance Optimizer around middle of screen
Select the solution you want to get Sps for
Go to OSS and add the files to download basket
When done return to screen and hit continue
Select - Confirm files in Download Basket
Error message comes if your sap user and your oss user are not setup in AISUSER screen
Now go to SAP Download Manager ( On your local pc ) and download the files you just confirmed of course using the same S-User id you just added them to the basket with
Apply support packages via spam per normal process
Return to the SOLUTION_MANAGER window select the landscape you are working on
Hit Maintenance Optimizer List
Choose the maintenance transaction you are working on
You will see a list of the confirmed and downloaded sps you selected
Once you apply these to the system using SPAM you will change the status of implementation to Completed and Hit Save
This completes this activity
If you wish to do more work you will have to create a new transaction.
[Edit section] Add A New Instance to Maintenance Optimizer
Sign into Solution Manager
Ensure new instance has valid license installed and logical clients assigned
Select Landscape Components
Right Click Systems
Select Create new system with assistant
Enter
SID / Description / Product Type / Installation Number ( Get this from SLICENSE in system you are setting up )
Next enter Sys # & MEssgae Server and hit continue
Next select Generate RFC Destinations & Assign Logical Components & Enter Client #
I always get a problem saving since SLD is not setup ignore and continue
Highlight the system you just added under Systems SAP Global Trade Services
Select Assignment to Logical Components
Now add additional software such as Net weaver ABAP & JAVA if your primary setup was of another type ( ex. GTS )
Highlight the system you wish to update under Systems and hit change
Select Header Data
Click Installed Product Versions
In the product box add whatever you require for this system
Select the version from the 2nd box and hit copy
Ex.
If you cannot setup the trusted system here is a workaround:
Create User in Target for Trusted System RFC from SM1
User: <Username>
Pass: <Pass>
Type: Communication
Use this when setting up the trusted connection, remove the trust and use this CPIC user info for the RFC.
Generate RFCs and ensure SMSY setup is done for SID in Solution manager
Now Create a New Solution For your instance:
Go to SOLUTION_MANAGER transaction
Select NEW
Give Descriptive name: ex. GTS Landscape
Under Solution Landscape
Select Solution Landscape Maintenance
Select System Groups and Logical Components Tab
Open Solution Landscapes
Select the one you just defined (GTS Landscape)
SOLTION_MANAGER
Select Change Management Support Package Stacks
Select Maintenance Optimizer
Select the Product Version
GTS 7.1
Select the System Type SID
From here you will be prompted to go to service marketplace and add the items you wish to install. You can do this beforehand as well, be sure to use the same Suser you setup in AISUSER with your sap login
It will ask you to confirm the basket, once you do that you install them normally.
Download with sap download manager, ftp and apply -
System monitoring configuration in solution manager EHP1
Hi all
I am in a bit of fix
We have upgraded our solution manager devlopment to EHP1
Now I have added one system through SMSY in solution manager to configure system monitoring
I have generated all the RFC's,I have created the logical component and solution and assigned the system to the solution
When I check my solution it is looking fine
Now when I go within solution and click on the tab system monitoring
It shows me on the left hand side -> Set up system monitoring
when I click on Set up system monitoring on the left part of SAP screen,strangely it doesnt take me to the activation of screen monitoring,it just shows me the best practices documents on the right side but nothing more than that
I have checked many guides,blogs and SAP tutors anfd have followed them but strangely I am not been able to go to the screen for activating system monitoring
Are there any activities that need to be done after upgrading to EHP1?
Are there any services to be activated for system monitoring?
Please advice
RohitI'm not 100% sure that it is necessary, but it won't hurt.
Perhaps the essential adjustment you need for system monitoring is being done in there.
It won't hurt -
Configure Solution Manager for MS Word 2002
Hi experts,
I am currently facing a problem when I want to create a business blueprint from the SOLAR01.
The MS Word document for the blueprint is created fine, but when I try to execute the macro it stops with error "library not found".
The reason is that "Microsoft Excel 12.0 Object Library" is not present on my PC. That is because I am using MS Office 2002 (where only version 10.0 of this library exist).
As far as I know the 12.0 Object library is part of MS Office 2007. I therefore presume that the Solution Manager is configured to create word documents for office 2007. So is there any possibility to configure it for office 2002?
Thanks a lot for all answers.
Best regards,
TorbenHi,
what is your solman system version?
please refer this [Note 1442338 - Business Blueprint Document: collection of fixes|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1442338]
jansi -
Configure TMS in fresh installed Solution Manager system
Hi Expets,
I have fresh Installed Solution manager. Configure TMS and now want to configure solution manger so that I can monitor all our SAP system from Solution manager. How I configure our SAP system in solution manager?
Also would like to know after TMS implementation if we like to use ChaRM or CTS+ so what changes required in current TMS setting? Thanks in advance.Hello,
No Deejoy, I provided you with how to resource to do the things you requested.
TMS is transport Management System.
If you want to manage transports with an enhanced product CTS+ I provided the configuration guide.
If you want to implement ChaRM, I pointed you to the Wiki.
If you want to inegrate CTS+ with ChaRM, I also provided you with resources.
And lastly, I directed you to RKT-SOLMAN which can help you configure any aspect of Solution Manager.
But I do not see where I said to manage TMS on Satellite systems you need to implement ChaRM.
Charm was only raised, because you raised it in your question.
You have all the resouces you require to address everything you raised.
This is what is provided in my earlier reply.
Regards,
Paul
Maybe you are looking for
-
Mid 2007 iMac24, which suddenly has a display problem.
First windows appeared partially transparent, showing shadows of images of windows which already were closed! Then it started to have trouble to wake up the display. Now even a restart results in a black screen which only eventually reappears after s
-
Has anyone else had their screen stuck on "processing" forever, after trying to rent a movie?
-
How to get the Primary key from Synonym
Hi , I want to get the Primary Keys for my tables . I used java.sql.DatabaseMetaData databasemetadata = connection.getMetaData(); ResultSet rs = databasemetadata.getTables(null, null, "%", null); rs.next(); System.out.println(" TABLE_CAT "+ r
-
Firefox not connecting to Addon Website for Updates
Firefox says it is unable to connect to Mozilla Addon site when I try to update my addons. Likewise, it gives the same error when I try to update addons directly from their page on the Firefox Addon Website.
-
Footage takes up more space after clipwrap changes the codec
I have mts files that need to be changed to .mov files so that they can be imported into fcp. I put a 32gb sdhc card into my mbp and convert the clips in clipward with a prores422 lt setting and save it to my lacie 1tb external hd and the files take