Solution manager requires Microsoft office products use language ENGLISH

In config guide for Solman SP6 section 3.1.2, there is a requirement that MS office products must have language setting EN.
Many of our customers use their own MS Office products with other language settings than EN.
Is this really a requirement or what happens if any user does not have language setting EN active in her/his MS office product? Which services in SolMan does not work anymore?
br: Kimmo

Solution manager language is english and in SAP business solution system (ERP2005) language is Finnish (=Finland). English and Finnish are in same code page. Customization in ERP should be created in Finnish language.
Is there some limitations if languages are different or why did you asked?
Regarding problems in config guide creation, macros in MS products are language dependent? like methodnames macro_execute() (EN) vs. macro_ausfuehren() (DE)? And if current language in MS product is other than EN, the macros used in config guide don't work?
br: Kimmo

Similar Messages

Can't find 2011 Microsoft Office product key after using Time Machine

I just upgraded my macbook pro to a 512gb crucial ssd. In order for me to do this without downloading any other software off the internet, I bought an external drive and had time machine back up everything. I installed the SSD, started up the computer and had time machine do its thing and booted everything up onto the ssd. Everything went perfectly up, until I went to open up any Microsoft Office application because they required I put in the product key. The last time I put in the product key was when I first bought the macbook pro about 4 years ago(I installed everything using the disc). What I tried to do was boot the computer using the old hard drive and we have the same story.... I need a product key that I don't have. I even tried installing a product key finder and it found no Microsoft Office product key.
Tomorrow my plan is to use time machine to bring me back to the couple minutes before I setup the new SSD. Before I do that, I want to know what your opinions are on this matter or more importantly, what should I do?
Thanks in advance.

Read the instructions that came with your PIN - they tell you how to get the Product Key from the MS Shop (I think it comes from there, anyhow!)
This link may work... https://office2010.getmicrosoftkey.com/
If not, please repost your query in the more appropriate Office Community forums here...
http://answers.microsoft.com/en-us/mac
Noel Paton | Nil Carborundum Illegitemi
CrashFixPC |
The Three-toed Sloth
No - I do not work for Microsoft, or any of its contractors.

How can I organize my Microsoft Office products on my dock?

Hello,
Does anyone know how to organize Microsoft Office products (Word, PPT, Excel) into a single fan on right side of dock? Or do the 3 Office products have to take up 3 spots on the dock?
Thank you for any help!

Drag the Microsoft Office folder to that part of the Dock. Or create a new folder (anywhere you like), put alises to those three programs in that folder, then drag that folder to the Dock.
Regards.

Microsoft Office Product Integration in GP

Hi,
I know there is rather extensive integration possiblities avialable for Adobe Document Services (ADS) in GP. I read somewhere that it is also possible to integrate other products.
Does anyone have any experience in this area? In particular with Microsoft Office products.
Thanks.
Dick

You can see this <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e3f6edc7-0701-0010-a5a4-f2ce0c749f9e">Interactive Form Tutorial</a> which is relevant for both MS Infopath and Adobe Forms.
There is also additional information in the <a href="http://help.sap.com/saphelp_crm50/helpdata/en/c4/8d4a4273bb3830e10000000a155106/frameset.htm">GP online help for Interactive Forms.</a>
Regards,
Austin.

How to retrieve Microsoft Office Product Key for Mac

Hi there, Hopefully someone might have a suggestion on how to retrieve the Microsoft Office Product Key for Office 2010 on Mac.
Scenario: Last month, Apple advised me my iMac hard drive may be faulty and would need replacing. That was done, I restored my iMac from Timeline backup and everything is dandy except I need the Product Key for Office to access any of my documents. I purchased the product online in my old job, that email address is now no longer valid and I have lost access to the email that the product key was emailed to me in. I am unable to retrieve the product key from Microsoft without buying a new copy.
I do have Office uploaded on my Macbook Air from the same download/product key, so I have access to the program on the laptop but not the iMac. Hopefully I can get the product key from the laptop somehow.
Any guidance or suggestions would be appreciated. Thanks :-)

As Office is not an Apple product, I strongly recommend asking in the Microsoft Office:Mac forums here:
Office for Mac forums
Everyone there is a Mac user AND an Office user, something you can't say about Apple's forums. You will get the fastest help there and I think you will find the contributors more than helpful.

My Microsoft Office products are corrupt and utility is unable to rebuild. I have a back-up -- what can i do?

My Microsoft Office products are corrupt and utility is unable to rebuild. I have a back-up -- what can i do?

Since this question is about a Microsoft product, you might have more luck getting suggestions if you ask in Microsoft's own forums.
Good luck.

I want to use Microsoft office products on my Ipad

I want to use Microsoft office on my ipad. How do i do this?

You see "Documents to Go" app in App Store
http://itunes.apple.com/it/app/documents-to-go-premium-office/id317107309?mt=8&l s=1

Took Quicktime Update - now Microsoft Office Products fail to start

I took the latest Quicktime 7.2 update today. Now my Microsoft applications won't start up! I use my Mac at work and without Word I'm screwed. How can I get my office products to run again? QuickTime 7.0.4 broke applications, now 7.2 is breaking them. What's the deal with QuickTime???
I'm going to have start doing the Microsoft "wait" with my Mac now. "Not take ANY updates for at least a week from release", because the updates cause more issues than the old versions. This is VERY frustrating.

OK, I'm back up and running.
Another thread had some information from bigman13 that provided a solution. It appears that most (not all) of the people having this problem had also installed Java6 beta. If you are one of those people, here is a solution that might help you. Caution - this involves performing steps from a command shell.
I think you must have a root account enabled to do this. If you don't and wish to enable it, select the "Help | Mac Help" menu item from your desktop screen and type in "root account". Select the "Enabling the root user" entry and follow those instructions.
Steps to fix the problem:
1) Open a Terminal window and type...
2) su -
3) cd /Library/Receipts/JavaSE6Release1.pkg/Contents
4) lsbom -s -f Archive.bom > /tmp/files
5) Now edit the /tmp/files file with a text editor and replace " " with "\ " and all "./" with "rm /" - Resave the file
6) From the terminal again: sudo bash /tmp/files
7) rm -r /Library/Receipts/JavaSE6Release1.pkg
8) sudo update_prebinding
9) I rebooted my Mac
10) Test that Word runs again - Mine Did!
11) I then reinstalled Java6
Hope this helps

Is Solution Manager required for ECC 6.0 upgrade?

We will upgrade our system from 4.7 to ECC 6.0. Is Solution Manager a required tool in ECC 6.0? My understanding is Solution Manager has to be run on a different server, ie. we will have to buy a new server. We have a small SAP implementation with only FI & CO modules, so we are trying to cut our costs if we could. Can anybody share their experience? Thanks for any input.

In an Upgrade , Solution Manager is required for Upgrade Keys and downloading the support packs . Now a days to download the support packs you have to approve it in Solution Manager otherwise it won't show up in your download basket.
May be SAP can provide you the keys & approve the SPs ( they used to do that before ) , in that case it isn't required.
You can also manage your upgrade project in Solman . Sooner or later you need to install solution manager. it's a nice system.Many good features like central monitoring, early watch alert etc etc ...
Thanks
Prince Jose

I need to re-enter Microsoft Office Product Key all the time!

Why do I need to enter the Product Key Number all the time when I open Office programs? I use Microsoft Office Mac 2011 Home & Student. At least every week I need to re-enter the product key number..... Why??

Get in touch with Microsoft support. Let them solve it. That is what I had to do with a similar problem.
http://www.microsoft.com/mac/office-for-mac-worldwide
Depending on who is on the other end you may be asked to pay $75. I was. If that happens insist the service should be free and ask to speak to a supervisor.

Accessing Document URL in SAP Solution Manager from SAP R/3 using BAPI

I want to access the hyperlink corresponding to a document present in Solution Manager from another system (i.e SAP R/3). The hyperlink can be generated manually by clicking on the button "Generate" present in Solution Manager. Can anyone please help me advising any BAPI to generate this hyperlink, or any standard function module for generated such a hyperlink used in Solution Manager so that I can define a custom BAPI.
Thanks in advance!

Hi Alvaro Hernán Rojas R ,
The product line is the hierarchy of the finished goods.
It is pertinent that the finished goods has emerged due to some process(es) carried on the raw material.
Thus logically you should map in solution manager based on the process only.
The macro process while depicts the processes at the highest level.The Business scenarios, Business Process gives a good idea about how you should go about configuring.The Steps/activities helps you to map in to SAP thro' T/Codes.
From the point of view of all of the below three,namely,
Easy configuration activities
Easy design of Unit and integration test
Easy activities of Process enhancement and optimization,
the option Map the process as ISO Standards
- Several projects : For each product line,will be most ideal.
It is the processes that drives the activities.The control activities like internal control etc are all process based.Given these,divorcing the business process from the configuration -as in -is certainly not a good practice.
Hope this helps.
Regards,
Ramesh

Uninstall Microsoft Office 2010 using intune

Has anyone successfully uninstalled Office 2010 using Intune to push the command?
I just upgraded all users to 2013 but would like to remove the old office.
Thanks
Ivan Nix

I know this is very old but I’m trying to clean up old posts. Did you ever solve this? If so it would be good if you could post the solution to assist others. If not, at this
stage, as nobody has answered, I would recommend that you call Intune support if the issue still exists.
You will find your local Intune support number here
http://technet.microsoft.com/en-US/jj839713.aspx
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

Uninstall Microsoft Office 2013 using Invoke-TroubleshootingPack

Hi,
I'm deploying an uninstallation package to uninstall Office 2013 using the ingenious Microsoft Fix it (located here: http://support.microsoft.com/kb/2739501/en-us)
called O15CTRRemove.
When running it manually, it removes everything that is related to Microsoft Office 2013 and I am able to install a new Office 2013 without any problems (changing from Office 365 to VL).
The problem is as follows:
I need to do this silently on a lot of computers using a deployment tool. I figured out how to use powershell and I'm doing it in the following way:
Import-Module TroubleshootingPack
$DIAGOFFRemoveOff2013 = Get-TroubleshootingPack -Path "C:\Deployment\Office2013Uninstall\O15CTRRemove"
Invoke-TroubleshootingPack -Pack $DIAGOFFRemoveOff2013 -AnswerFile "C:\Deployment\Office2013Uninstall\DIAG_Off_RemoveOff2013.xml" -unattended
I created the Answerfile DIAG_Off_RemoveOff2013.xml in the following way (according tohttp://blogs.technet.com/b/heyscriptingguy/archive/2011/02/09/use-powershell-troubleshooting-packs-to-diagnose-remote-problems.aspx):
Get-TroubleshootingPack "C:\Deployment\Office2013Uninstall\O15CTRRemove" -answerfile "C:\Deployment\Office2013Uninstall\DIAG_Off_RemoveOff2013.xml"
It looks like this:
<?xml version="1.0" encoding="UTF-8"?>
<Answers Version="1.0" />
When I run the script it works but for some reason, it doesn't work when I run it as system (my deployment tool runs the script as system, and I've tried it manually like this):
psexec -i -s cmd
cmd /C powershell -executionpolicy unrestricted -file "C:\Deployment\Office2013Uninstall\Uninstall_Office2013.ps1"
It just hangs and I can see in eventviewer that it has run a few troubleshooting packs, that the uninstall of Office is complete but it doesn't continue until I force kill sdiagnhost.exe.
If I run the script after killing sdiagnhost.exe, it finishes without a problem.
I have temporarily solved it like this (I run the same job twice, to be sure everything is removed and the second one finishes quickly while the first hangs until the timeout):
Start-Job -ArgumentList -ScriptBlock {
$DIR = "C:\Deployment\Office2013Uninstall"
Import-Module TroubleshootingPack
$DIAGOFFRemoveOff2013 = Get-TroubleshootingPack -Path "${DIR}\O15CTRRemove"
Invoke-TroubleshootingPack -Pack $DIAGOFFRemoveOff2013 -AnswerFile "${DIR}\DIAG_Off_RemoveOff2013.xml" -unattended
Get-Job | Wait-Job -Timeout 1200
Get-Job | Receive-Job
Get-Job | Remove-Job -Force
Start-Job -ArgumentList -ScriptBlock {
$DIR = "C:\Deployment\Office2013Uninstall"
Import-Module TroubleshootingPack
$DIAGOFFRemoveOff2013 = Get-TroubleshootingPack -Path "${DIR}\O15CTRRemove"
Invoke-TroubleshootingPack -Pack $DIAGOFFRemoveOff2013 -AnswerFile "${DIR}\DIAG_Off_RemoveOff2013.xml" -unattended
Get-Job | Wait-Job -Timeout 1200
Get-Job | Receive-Job
Get-Job | Remove-Job -Force
I am thinking that there is some kind of dialogue questions that I need to get into the answer file, but I have no idea how to do it.
Any help is appreciated!
Best regards,
Simon

Credit goes to MS for core script (its to long to post here).
Credit goes to the guy who wrote the cleaner script. Whoever packaged it and didn't build in silent switches gets zero points.
Please note that this will only work for C2R installs of Office 2013.
This is not true. There are scrub scripts specific to C2R as well as MSI.
I extracted the scrub vbs from O15CTRRemove.diagcab
This is what worked for me. Use 7-zip to extract the entire package to a directory. Then run "OffScrub_015msi.vbs all".

After migration to new iMac - problems with Microsoft office 2008 using multiple users

I migrated my data from my old Imac to my new Imac. On the new Imac I created multiple logins for my kids. My microsoft office 2008 programs will not open. I keep getting the "Customer Experience Improvement Program" screen which cycles through, checks for update then closes never allowowing me to access the program. Please help!!

Reference your first post - I download and use dmg files, so either I'm lucky or they are supported.
I would try the disk reinstall since at this point there doesn't seem to be many options.
Do you have a backup? You could restore the Microsoft Office 2008 folder.

Microsoft Office Product Key

Hi
I am planning on getting a new hard drive for my macbook pro and I can't find my Microsoft Office 2011 product key (or installation disk)
If i want to have office on the new hard drive, do I simply have to copy the Applications (and related files) over to the new hard drive, then add the [/Library/Preferences/com.microsoft.office.licensing.plist] file?
Or do I need to reinstall Office from the microsoft website (if so, where would I find this)?
Please correct me if I am wrong

Check this
http://support.microsoft.com/kb/2279109

Solution manager requires Microsoft office products use language ENGLISH

Similar Messages

Maybe you are looking for