Solution Manager - Support Packages

Dear All,
       We are applying patch for our SAP Solution Manager 4.0. We are using SAP ECC 6.0, We already applied patch for our development and production servers.
     The following are the patch level in Solution manager      
     BBPCRM             500          0007     SAPKU50007
     CPRXRPM     400          0007     SAPK-40007INCPRXRPM
     BI_CONT             703          0003     SAPKIBIIP3
     ST                     400          0010     SAPKITL420
     ST-A/PI     01I_CRM500     0000         
     ST-ICO             150_700     0006     SAPK-15076INSTPL
     ST-SER             700_2006_2     0000         
We downloaded all the above package, but struck in applying the patch. I want to know the hierarchy of the packages to apply, i confused in this level.
Could anybody let me know the order of above support packages to import.
Regards,
Sridhar S

As already mentioned, the best is to apply a complete Stack by the way you should do the complete job and update to EHP1 because your system will be still low in some SP's.
If you have done SP's installations per components and not per stacks then you could face problems after or during SP's installations so it will be way better to use the Stack Strategy.
But if you think you should go this way then in SPAM you can review New Packages and once there, every package will show up there prerequisites or level of the components (ex: SAPBASIS, ST_SER, ETC) that are necesary to be able to install any component SP's.
It is extremely important to read the Notes regarding the SP's, their dependencies and possible problems with some of them, for example, some SAPBASIS SP's cannot be applied alone or up to certain level because there are known problems and you should go one level up or down to avoid this problems.
Either way I have applied Stacks since they come out and it is better to use this strategy in our Solman with no problems at all.
Have a nice day,

Similar Messages

  • Solution manager Support Package 19 & 20

    Dear Expert,
    Recently I installed the solution manager,
    But there is one DVD call Support Package 19 & 20,
    I'm not sure how to upgrade the package to SLM.
    As I knew,
    there is a folder call "DATA",
    I tried to used SAPCAR tool to decompress it into usr...EPS/in folder.
    and the .SPA file use JSPM tool to update it to the SLM system.
    but....when i used SAPCAR to decompress , it showed a error message below.
    SAPCAR: could not convert from UTF8 string
    Can any one helps me ?
    And What is the SOP to update SPS 19~20??
    Regards
    Jack Lee

    You can get SolMan SPS19/20/21 from http://service.sap.com/swdc:
    Support Packages and Patches - Entry by Application Group
    Support Packages and Patches - Entry by Application Group" SAP Technology Components" SAP SOLUTION MANAGER" SAP SOLUTION MANAGER 7.0 EHP 1
    Link to SP Stack Application
    If you are getting errors from sapcar I'd recommend to first check to get the latest sapcar version and if it does not hep to redownload the file
    Nesimi

  • Solution Manager Support Package Release Notes?

    Hello,
    I'm looking for release notes for all support packages of the solution manager 4.0.
    I would like to read, which changes in which support Package were made.
    Could you help me?
    regards Christian

    Hello Cristian,
    If you are interested in what is contained in the respective support packages functional-wise, you may check this SAP Service Marketplace site:
    <a href="http://service.sap.com/form/sapnet?_SHORTKEY=01100035870000538663&_SCENARIO=01100035870000000202&">http://service.sap.com/form/sapnet?_SHORTKEY=01100035870000538663&_SCENARIO=01100035870000000202&</a>
    Search for respective support package, such as "4.0 Support Package Stack 12" - which currently is the latest one:
    <a href="http://service.sap.com/form/sapnet?_SHORTKEY=01100035870000538663&_SCENARIO=01100035870000000202&_OBJECT=011000358700000478802007E">http://service.sap.com/form/sapnet?_SHORTKEY=01100035870000538663&_SCENARIO=01100035870000000202&_OBJECT=011000358700000478802007E</a>
    or the previous ones named:
    "4.0 Support Package Stack 9" and
    "4.0 Support Package Stack 6"
    I hope this helps you in finding the information you are looking for.
    Best regards,
    Doreen

  • Maintenace optimiser, support package Manager, Support package stack

    HI all,
             Could you please enlighten me the differences among
    Maintenance Optimizer,support package Manager, Support package stack
    And the purpose and most importantly the documentation to be able to use them
    in case of implementation phase (In case of a fresh ECC 60 Production version)
    Thank you

    Maintenace optimiser is used in solution Manager to Approve the Patch that you need to download fron Service  market place
    Support package stack is the collection of patch for a release.
    Support package Manager is SPAM/SAINT used to apply support pack.
    If you want some thing else please revert back
    thanksd Rishi Abrol

  • Solution Manager Enhancement Package 1 issue with SAINT

    Short Text    
    Solution Manager Enhancement Package 1 issue with SAINT    
    Long Text    
    Hi,
    We are trying to install the SAP Solution Manager Enhancement Package 1
    using SAINT. We have encountered an issue while trying to use the Stack
    Configuration option withing SAINT.
    Issue 1: A message appears saying OCS Package SAPK-701DHINSAPBASIS does
    not match current software component vector" . Whats does that mean and
    how do we resolve this issue?
    Issue 2: Ignoring the above message and going forward, we see the
    import condition page where it fails saying BBCPRM component must not
    be installed in this system
    Please check the attahed screen shots for the current Software
    Component levels and the errors.
    Please help to resolve the above issue and explain if we are missing
    anything here.
    Thanks,
    Nag Koppuravuri

    For the errors like ...
    "OCS Package <Package Name> does not match current software component vector" will usually appears when the upgrade is not matching the "MINIMUM support package level"
    Check note 1182336 - Though this note is not for the support package you are applying but the error points to same direction.
    To solve your problem...
    Please check the "Update Guide SAP Solution Manager 7.0 EHP 1 " available on Market place.
    Go to Service Market place -> Release & Upgrade Info -> Installation and Upgrade Guide
    To your left dropdown SAP Components -> Solution Manager -> Release 7.0 EHP 1 and on the right panel check above document Section "Preparations"
    If you satisfy those conditions I think you should be able to apply EHP1 smoothly.
    Lets us know if anything...
    Cheers!

  • Does Solution Manager support Service Report for non-abap?

    Does Solution Manager support Service Report for non-abap?
    We can schedule and view reports for ABAP but for all the non-ABAP such as J2EE stack (PORTAL) we can not pull out a report.
    If the answer is yes please let me know where I can get the documentation of how to setup SLA for PORTAL or non-ABAP.
    I found a document on EWA non-abap but non for SLA.

    Hi
    actually i am in task of setting up ewa for portal.
    i had already done with abap components (ewa and sla)
    i stronly believe one of the pre-requiste to get sla is EWA.
    so i think if u can setup ewa for portal then you can get sla too.
    Regards,
    Vijay.

  • Exporting Solution Manager Support Desk

    Hi
    Does anyone know of a way to export the Solution Manager Support Desk (messages and resolutions) into either a MS Office format (Excel, Access) or export to another Solution Manager system of the same version?
    Much appreciate any help.
    Thanks
    Ginish

    Hi,
    Please provide the document for solution manager installation and also configuration steps.
    Regards,
    Thirumal.A

  • Solution Manager - Support Enablement Package 1.0

    Solution Manager - SEP released to customers ?
    Please mention the download link in https://websmp109.sap-ag.de/swdc if released.
    Regards

    Hi,
    Here's the file, which will solve all your queries on SEP.
    https://websmp201.sap-ag.de/~sapdownload/011000358700000117982007E/20070226_MasterGuide_SEP.zip
    Hope this solves your problem.
    Feel free to revert back.
    --Ragu

  • SOLUTION MANGER SUPPORT PACKAGES CRTs ERROR

    Hi all..
    System status: solution manager 4.0/MS SQL/Windows 2003/kernel-159/sapm 027/700/tp version:372.04.29
    When i am applying basis and abap patches(11) then i am getting CRTs error.
    the error message is-
    The import was stopped, since an error occurred during the phase
    ADDON_CONFLICTS_?, which the Support Package Manager is unable to
    resolve without your input.
    After you have corrected the cause of the error, continue with the
    import by choosing Support Package -> Import queue from the initial
    screen of the Support Package Manager.
    The following details help you to analyze the problem
        -   Error in phase: ADDON_CONFLICTS_?
        -   Reason for error: TP_CANNOT_CONNECT_SYSTEM
        -   Return code:
        -   Error message: TP_INTERFACE_FAILURE
    how can I remove this error? please help me urgently.
    thanks
    NANI

    Hi,
    You have to add extra addon (CRT) support pack with SAP Basis support pack. It is necessary for solution manager.
    Please can you tell me which support pack you are installing and what is your system version. (e.g SAP ECC 6.0 or SAP R/3 4.7 etc)

  • Solution Manager : Support Desk Automation in Portal : GP or ABAPworkflow ?

    Hi ,
    We want to autoamte the Support Desk.
    Currently One Person is needed to handle support desk.
    - when a request mail comes to support , he(the person who handles support desk) has to create a support desk message, and set the status
    -For each reply mail also , he has to update the support desk messge.
    So we want to automize the support desk through portal.
    -For creating a message, a webdynpro iView will be created.
    _ For each user when he logs into the portal, he can view the messages pending with him, and he can act on it.
    - For each such action , RFC's will be called to update the solution manager database.
    But we are confused about..which workflow should be used? ABAP workflow or GP workflow? Which will perform better?
    Can anybody help me to reach a decision?
    thanks
    Smitha

    How about the BSP page?  Transaction 'NOTIF_CREATE_BSP'.

  • Client Copy Solution Manager Enhacement Package 1

    Hello solman experts!
    I'm going to install SolMan EHP1 (SPS20). I'm preparing execution plan for installation. Now I have problem in step sequence.
    Should I make client copy first and then run tamplates for initial configuration (from SOLMAN_SETUP)?
    When I installed PI 7.1 I made client copy before template run (I checked note 1309239). But for SolMan I didn't find any information regarding SolMan client copy and template (and also SOLMAN_SETUP) sequence.
    Do you have any ideas?

    Make copy before customization

  • Solution Manager - Logical Component for SAP Netweaver EHP2

    Hello,
    I installed the newest SAP Netweaver Ehp2 (with usage type AS ABAP only) for a future integrating with BI_CONT (SAP BI requirement). So... what I want to know is... I want to do an update of support packages to the latest Stack (SPS) and in this product version (NW EHP2) the latest stack is stack 06 !! But I ´m facing with a problem which is, because I have to maintain this system in Solution Manager (for Maintenance Optimizer activity)...so what I want is configure this new system on Solution Manager Ehp1 (with SPS 23) but in tcode SMSY I didn´t found this Product in Logical Components for I can apply this system to my Solution... I only see SAP Netweaver with EHP1 and not with EHP2 which is the version that I want to apply this new system. (This is mandatory task, because without it, I will not be able to download the support packages for NW 7.0 EHP2)
    Tell me two things... first if this level version of Solution Manager that I have here (SPS 23) have this product in logical components, and two... if not it, is necessary to raise the level of Solution Manager support packages (to latest stack SPS 25) for I can see that logical component SAP Netweaver EHP2?!
    Thank you very much
    João Dimas - Portugal

    Hi João,
    You can verify if the EHP2 is available (if) in your system, this can be done once you are in SMSY -> Product Definitions -> SAP Netweaver where you should able to see the EHP2. If so, then it's a matter of marking the leading Product & Product Version under the Header Data ->Change Product Assignment where you can use the drop down arrow to select the Product and Product Version. If it's not available, then by checking the 'Free Product / Select Product Version' then use the drop down arrow to select the product & Product Version, once you selected that then click on copy and mark that as active and save.
    Then you need to create a new logical component in System Group & logical Component under SAP Netweaver, then assign the system to the logical component. Once this is done you can use the logical component in a solution and create a maintenance transaction.
    I hope this help you to proceed further, thanks.
    Jay Soma.

  • Spam/saint update and support package

    Hi,
    our solution manger server is crashed long back.Now i installed the solution manager in seperate server.
    solution manager iam getting SPAM/SIANT version as 7.00/0.20 and in development/production SPAM/SAINT version in 7.00/0.23.
    as per check in service market place under SPAM/SAINT update 700 iam getting SPAM/SAINT update version 700 iam got the message as to import  Support Packages SAPKH60008 and SAPKGPAD08. Please advice.
    *in solution manager support package is
    SAPKB70008
    SAPKA70008
    SAPKIPYJ78
    SAPKITLQI2
    SAPKW70008
    SAPKNA7005
    SAPKU50005
    SAPK-40005INCPRXRPM
    SAPKITL416
    SAPK-15074INSTPL
    SAPKITLOG3*
    *in dev/produ system support package is
    SAPKB70011
    SAPKA70011
    SAPKIPYJ7B
    SAPKITLQI3
    SAPKW70012
    SAPKNA7008
    SAPKE60015
    SAPKH60008
    SAPKGPID08
    SAPKGPGD08
    SAPKGPRD08
    SAPK-60008INFINBASIS
    SAPKGPPD08
    SAPKGPFD08
    SAPKGPHD15
    SAPKGPDD08*
    please advice me in service.marketplace>downloads>support packages and from where i will get packages as in dev/production system.
    Regards,
    Asif

    Hi Asif,
    How to get particular support package from service market place .
    EX:SAPKB70011
    If you want to download the patch SAPKB70011:
    Service Market Please --> Downloads --> SAP Support Packages --> Search for Support Package and Patches.
    At the search field, enter SAPKB7001* it will give you all the support package from SAPKB70010 to SAPKB70019 if available.
    You can add the required patch to your download manager.
    Thanks & Regards,
    Nagendra.

  • "manage nuget packages for solution" is missing in the drop down for NuGet Package Manager

    Hi,
    I have VS2013 Ultimate on windows 7 PC and that Nuget Option does show in the dropdown.  Today, I setup a vm in Azure, from image I select VS2013 Ultimate, just like the one on my PC.  However, when I click on the Tools, Nuget, there is only 2
    drop down option, "package manager console" and "package manager settings" are the only 2 available.  How can I get the ""manage nuget packages for solution"?
    I want to install the xamarin.forms extension and I need this.
    thank you
    Thank you

    Hi laJasmine,
    Based on your issue, generally, I know that there have two ways to see the "manage nuget packages for solution" option after we install the VS2013 Ultimate.
    One way is that it is default that we can see the "manage nuget packages for solution" option by right click this Solution->Manage NuGet Packages for Solution option like the following screen shot.
    Another way is that we can see the "manage nuget packages for solution" option by clicking the Tools->Library Package Manager-> manage nuget packages for solution like the following screen shot.
    So please check if you can get the "manage nuget packages for solution" option from this above two way again.
    If you still could not the "manage nuget packages for solution" option in this VS2013 Ultimate, to check if this issue is related to the VS2013 Ultimate set up file. I suggest you could try to copy this setup file and then install it on other machine
    and then check if you still get the issue.
    If you have any updated message about this issue, please tell me.
    Best Regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Support desk queries on solution manager

    Hi All
    I have few queries on solution manager support desk functionality.
    1.Is this the only way to create support desk message HELP-CREATE support desk Message from each individual system??
    2.In our scenario,when we are creating the message we would like to assign component( it should be project specific component,not SAP specific component)...How to acieve this??
    3.We have a requirement where the message has lot of status and fields and depending on the message processor I would like to control which status or field user should be able to view and work on...how to achieve this??
    4.Need the way to send a message to the processor,as soon as his name appear as message processor.
    5.I want to track all the persons involved in the message processing,how can I do this??
    6.I want to use a different transaction type not the standard SLFN,so what configurations are needed??When I create a message it should automatically take properties of transaction type of newly created one??

    Hello Dolores,
    first of all thanks for that answer. I read it in the germany documentation help.
    Here an extract:
    +Anlegen von Support-Meldungen über NOTIF_CREATE
    Mit der Transaktion NOTIF_CREATE können Benutzer, die in Satellitensystemen arbeiten, Meldungen anlegen und an den SAP Solution Manager versenden.
    Vorgehensweise
    Starten Sie Transaktion NOTIF_CREATE.
    Geben Sie folgende Werte im Dialogfenster Anlegen einer Support Meldung ein:
    Priorität
    System/IBase-Komponente
    Kurz- und Langtext
    Um Anlagen anzuhängen, wählen Sie Registerkarte Anlagen.
    Sichern Sie Ihre Eingaben.
    Ergebnis
    Sie haben eine Support-Meldung angelegt.+
    Yesterday I search the internet for a note, but I didn't find one. So I'am happy now.
    But now the next problem occurs. My next issue is about the SLD. The system cannot get the data from the satellites. I'am not sure, but I think our SLD isn't perfectly configuried. Do you have an "How To" or something like that?
    regards
    marc

Maybe you are looking for