Solution Manager sync with ARIS

I believe I have done all the configuration to sync solution manager content with aris. I followed the instructions in the aris adminstration manual. I think I'm connecting ok with JCo, but I get the following error: function 'Z_SOLAR_READ_INSTALLED_COMPS'not found on SAP-Server
I have completed the transport of the two .sol files mentioned in the manual. Any ideas?
Thanks.

Hi,
look in SAP Function Builder and search for Z_SOLAR_READ_INSTALLED_COMPS. I'm sure, that your import failed or the function did not have been activated.
Here I have made a function test by my own (but for SAP ERP ECC6 - which is not the standard use). At the end of the article you can find the test method -> [ARIS BS 7.1 - VPN Handout|http://www.aris-user.de/aris/viewtopic.php?p=4722#4722]
So I rest with the best regrads
Yours sincerely
Sabrina Andrea Bangert - Herzogenrath 2009

Similar Messages

Handling Solution Manager changes with ChaRM (ChaRM on SolMan PRD)

Hi Experts,
Having deployed ChaRM to satellite system (three system landscape) we became interested in handling Solution Manager changes with ChaRM. We have operable ChaRM in SolMan 4.0 SP12.
We have DEV and PRD for SolMan so we are talking about two system landscape.
Has anyone of you done this? Does it go the same way as if SolMan was a real satellite system (rfc's=>tms=>ibase=>organization=>project=>MC=>CRs = order of configurations roughly).
I tried searching specific instructions for this deployment but it seems that configuration guides etc focus on satellite system handling. Our need is basically to document and control SolMan changes and with ChaRM we could.
Perhaps there is no magic to this and everything goes just like in satellite, but I would appreciate any experiences others may have had doing this.
Kind regards,
Auli

Hello,
We have implemented this with two systems landscape where in we have in place a Solution Manager Dev system and Solution manager Production system both are SOLMAN 4.0 with SP12. So the path for us to move the changes is from Development Systems to Production system.
We have ChaRM between the Dev and production. We reapplied the satellite system concept. For us the Solution manager Prod is a satellite systems all the changes that we move from Development system to Production systems is tracked with necessary documentation in the ChaRM process.
Yes, I agree with you that this is not any big magic. Working with two SOLMAN implementation, I strongly feel that SAP needs to have well rounded ChaRm processes. We have robust Change Management Process, but when we moved to ChaRM we were limited functionality of the ChaRM processes.
I had approached and did some research on how other companies are implementing the same process. Most of them have almost the same process for tracking SOLMAN changes. I am still look out for improved process to manage SOLMA changes.
Hope this helps!!! Thanks
Vish

Will Desktop Manager Sync with Sage ACT?

I have a customer who has a Windows Mobile device and is thinking of moving to a BB device as WinMo no longer works for him.
Will DTM sync with Sage ACT at all?
In the sync options you normally get the options of different programs to sync with, will ACT appear in this list?
Thanks
Tom

If I recall correctly, in the past Desktop Manager version 4.2.2 did sync with ACT!.
DM 4.2 is no longer supported by RIM.
The current support DM 5.0 does not. Sorry.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Solution Manager Interface with Tools Outside SAP

Does anyone have information on Solution Manager's abilities to interface with tools outside of SAP? I am interested in interfacing Solution Manager with legacy systems and main frame systems (e.g. Informatica). I am especially concerned with Root Cause Analysis, Exception Analysis, and Error Reporting in Solution Manager regarding non-SAP systems. Also, if Solution Manager is able to interface with these systems, can it access details from outside SAP (e.g. data from legacy systems)?

Hi,
The solution manager can be interface with the ARIS.We did in our project this interface.
The Business process flow was defined in ARIS & synchronize with the solman & once configuration is done then we reverse synchronize the same to update the ARIS,so you can interface with legacy also.
Regards,
Raj.

Solution Manager Integration with Maximo

Hi All,
I believe all you know what is Maximo. Those who do not know, I would like to take an opportunity to brief them about the same.
Maximo is a ticketing tool from IBM. This tool is basically used to record and keep track of all change requests taking place in SAP landscape.
Having explained in brief above about Maximo, may somebody please tell me if this can be integrated with Solution Manager?
Has anybody done it before? If so, may you please share your experience with me?
Hope to get reply.
Regards,
Faisal

Hi Faisal,
If you could share your findings and docs and plan if possible , would be appreciated.
I have gone through the SAP notes for integration of Service desk with third party ticketing tools and some white papers on SDN but it does not help much.
Thanks,
Regards,
Kaustubh.

Linking solution manager projects with CHARM implementation project

Hi Guys,
Currently i am working in CHARM implementation project, i have created one CHARM implementation project with urgent correction and i am able to create the Transport request and release the transport request succesfully and i am able to move it to quality system successfully. But my customer is asking to link the solution manager project to CHARM implementation project.
Earlier before implementing CHARM they have implemented project managent in solution manager, during that project they have created so many projects which are currently running, now they want those projects to be linked CHARM implementation project.
When ever they create a transport request through CHARM they want the TP to be saved under a respective project which they are using currently. but according to my knowledge the TP can be saved under CHARM implementation project only.
Now i want to know whether the projects created in SOLAR_PROJECT_ADMIN can be linked to CHARM implementation project. Pls give ur valuable inputs as it is very urgent.
Thanks&Regards
Raju

Hello,
We have implemented this with two systems landscape where in we have in place a Solution Manager Dev system and Solution manager Production system both are SOLMAN 4.0 with SP12. So the path for us to move the changes is from Development Systems to Production system.
We have ChaRM between the Dev and production. We reapplied the satellite system concept. For us the Solution manager Prod is a satellite systems all the changes that we move from Development system to Production systems is tracked with necessary documentation in the ChaRM process.
Yes, I agree with you that this is not any big magic. Working with two SOLMAN implementation, I strongly feel that SAP needs to have well rounded ChaRm processes. We have robust Change Management Process, but when we moved to ChaRM we were limited functionality of the ChaRM processes.
I had approached and did some research on how other companies are implementing the same process. Most of them have almost the same process for tracking SOLMAN changes. I am still look out for improved process to manage SOLMA changes.
Hope this helps!!! Thanks
Vish

SAP Solution Manager SR1 with MSSQL on W2K3 IA32 - Problem with Kernel

Hello,
we are implementing a sandbox in order to test the SAP Solution Manager 4.0 SR1 with MSSQL on W2K3 IA32. Therefore we ordered the installation CD for the above mentioned configuration. Instead of getting the SAP NETWEAVER Kernel SR1 we got SR2. Now we have the problem, that the installation program SAPINST is requesting the SR1- Kernel.
Unforunately the SR1-Kernel seems no longer available in the download section.
It would be fine to get a suggestion how to solve the problem.
Thanks
Best regards
Ralf Richter ([email protected])

Hi Andreas,
thanks for the hint, I have already checked the LABEL.ASC. I have no LABEL.ASC-Key for the SAP Netweaver 2004s SR1, so it would be a possibilty to substitue this key. But neverhteless, I think, there should be another official procedure in order to use the SR2 instead of the old SR1. I have contacted Klaus Billing at SAP as recommended in the OSS Note 918078. Best regards. Ralf R.

Solution Manager Integration with Tivoli and TSRM

Hi,
Has anyone done an integration of SAP Solution manager with Tivoli or TSRM. Solution Manager can perform the same capabilities of Tivoli or TSRM of monitoring and Service desk. However we want to use the best of both. I would appreciate if if someone can share thier thoughts on this.
Regards
Jasvinder

Hi,
Heres a good news for you.
IBM Tivoli Service Request Manager version 7.1 software has now SAP-certified for integration with SAP Solution Manager 7.0 via the service desk interface scenario (SMG-SDI 4.0).
[The News|http://www.cbronline.com/news/ibm_launches_new_service_to_help_automate_it_service_desk_operations_091013]
To Inegrate refer [this guide.|http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e3eeb4a8-0b01-0010-bd99-f4a700a49d32]
Hope this will solve your problem.
Feel free to revert back.
-=-Ragu

Solution manager integration with Hp QC

Hi Team ,
We are trying to integrate Solution manager 7.0 with Hp quality center 9.2 ,i have installed the component ST-QCA ,but even after that i am not able to find the node to activate QC under SAP Solution manager>Configuration>scenario specific settings-->activate solution manager enhancements
could u please tell ,if i have missed something
regards
Praveen

Hi,
With the EhP1, the menu was changed... Follows the way:
SAP Solution Manager Implementation Guide -> SAP Solution Manager -> Scenario-Specific Settings -> Third Party Integration -> SAP Quality Center by HP -> Integration Test Management ...
Is this?
Thanks.
Good Lucky!
Best regards,

Solution Manager Interfacing with Remedy

How do we interface Remedy (Ticketing tool ) to Solution Manager and is it mandate to enable Solution Manager Service Desk for an effective ChaRM implementation or can we use the existing Remedy tool interfaced directly to Sol Man.

Some Discussion about Remedy And Solution Manager,
Solution Manager - Service Desk + Remedy Integration
And Yes BMC Remedy can be integrated with solution Manager, so please Contact Remedy to guide you on this one.
Regards
Shailesh Mamidwar

With iCloud activated on iOS devices, how do I manage syncing with iTunes?

Guess it's time to take a class at the Apple Store (there's an app for that)
Two Questions:
Question 1
I have turned on iCloud in my iPad and iPhone5 for contacts, calendars, reminders, Safari, Passbook (iPhone only), and Find my iPhone/iPad.
I am not using iCloud for backups, email or photo stream because for many reasons I choose to avoid WiFi.In the iPhone User guide (page 57) it says, "if you use iCloud to store your contacts, calendars.....don't also sync them to your device using iTunes."
When I set up the devices in iTunes, i checked "Automatically sync contacts, calendrs, bnookmarks, notes and email." Now I want to modify that setup. However, if I simply plug in the devices to the computer I'm going to get an automatic sync and I understand that can unnecessarily duplicate data.
How to resolve this?
Can I just turn OFF the iCloud features on each device, attach the device to the computer, and reconfigure iTunes to stop the auto-sync of the contacts, etc.? Then after ejecting the device, I turn the iCloud features back ON?
Question 2
I've been downloading apps, music, and books in iTunes and then syncing them to my devices. How does this change with iCloud?
On each device I've gone into Settings-Store and activated Automatic downloads of Music, Apps, Books.
Now, when I go to my PC and log in to iTunes to order an app, book, music, do I still have to attach each device to the computer in order to obtain the downloads?
What about apps I obtain directly from a device?

For your first issue, without connecting your iPad open iTunes on your computer and go to Preferences and on the Devices tab check "Prevent...from syncing automatically". This will disable automatic syncing when you connect your iPad, allowing you to change your settings without syncing. Next, connect your iPad, click on the name of your iPad on the left side of iTunes and to to the Info tab and uncheck the data you no longer want to sync with iTunes (such as contacts and calendars). When done making you changes, click Apply at the bottom (this will sync your phone with the new settings). If you prefer, you can then go back to iTunes preferences and re-enable automatic syncing.
You will continue to sync your iTunes media such as music and apps with iTunes as you did before. These are not stored or synced with iCloud (although you can redownload media purchased from the iTuens and app stores in the future if you need to; however, this has nothing to do with your iCloud account).
If you have enabled automatic downloads for your Apple ID, when you purchase apps, music or books in iTunes using this Apple ID it will automatically be downloaded to your iPad. If you purchase them on your iPad, they will be automatically added to your iTunes library when you sync your iPad.

Solution to syncing with two computers

i have a client who wanted to sync her addresses, datebook, mail etc at her office and her music and photos at home. i was told by many many people at apple that this was impossible.
finally i got a great iphone guy on the phone who said sure, you can do that. i thought i would post what he told me in case anyone else wants to do this.
it seems pretty obvious now but....
with the phone plugged it, go through all the things to sync and only click the ones you want to sync on that computer. on the summary page, under options, only click the second option...only sync checked items.
this worked flawlessly ...hope this can save someone some reasearch time....

It works. Make sure you:
1. Select "Disable automatic syncing for all iPhones" under Edit / Preferences / iPhone in the iTunes menu.
2. Uncheck "Automatically sync when this iPhone is connected" in the Summary tab of iTunes.
3. Check "Only sync checked items" in the same tab.
4. On the computer you want to sync contacts and calendar, check the corresponding boxes in the Info tab. UNCHECK everything else in the MUSIC, PHOTOS, PODCASTS and VIDEO tabs.
5. Sync your iPhone with this computer FIRST.
6. On your other computer, follow the same steps above (1, 2 and 3). Then, UNCHECK everything in the INFO tab, and check everything else on the other tabs.
7. When you sync with this second computer, you may get a message that the iPhone has already been synced with another computer, and that the media library will be deleted. Fine. There should be NO media library on the iPhone since you unchecked all the media items on the first computer, right?
8. Sync. Then you can sync on both computers and each will sync what is checked and not overwrite the rest.
I have this working on two PCs with Windows XP. I have read posts of folks doing it with two Macs, and with one Mac and one PC.
This is not sanctioned by Apple, so I dont know if these steps are "correct". I only know that these are the steps I followed and worked for me. Your mileage may vary.

Solution Manager; problem with SAPLSADC, DBM_CONNECT_PUR

Hi, I need help. What should do I do. In logs are some errors like this:
Directory: /usr/sap/SOL/DVEBMGS00/work
Name: dev_rfc2
Destination: NONE (handle: 3, , {42DBB323-B2C9-1AA8-E100-0000C0A8D220})
Trace file opened at 20050718 154733 CEST SAP-REL 640,0,71 RFC-VER 3
======> Name or password is incorrect. Please re-enter
ABAP Programm: SAPLSADC (Transaction: )
Called function module: DBM_CONNECT_PUR
User: SAPSYS (Client: 000)
Destination: NONE (handle: 5, , {42DBB325-B2C9-1AA8-E100-0000C0A8D220})
thanks

this system runs on Linux/MaxDB, Solution Manager 3.2 (latest SPL loaded)

Solution to syncing with both a Mac & PC

This is for anyone trying to sync their contacts, calendar & bookmarks from a PC, and all of their media from their Mac. I had many problems, but finally figured it out (PTBoater, you led me down the right path!). You have to uncheck "automatically sync" on the info page, and check "only sync checked items". Then after you finish syncing with either the Mac or PC, uncheck both of them, click apply, and disconnect and the device should be recognized by the other machine. This worked for me...hopefully it will work for any of you guys out there struggling with it...

I have to do it with each sync....and it still doesnt work every time. Definetely not as elegant as the sync experience with a single machine.
I could be wrong on this, but you may run into issues. If I understand what you;re saying, you are trying to sync contacts between Mac & PC. Not sure this will work. I'm thinking (again, I'm not the expert here) the only reason what I'm proposing will work, is that I am syncing different data (i.e. contacts, bookmarks ONLY on the PC sync, and music, etc. ONLY on the Mac; no syncing same data on multiple machines). Not sure...but good luck

Solution Manager Integration with IBM Maximo

Hi,
I am trying to integrate IBM tool Maximo with Solman for incident management and testing. I have gone thru SAP notes 529754, 962383 but not getting any direction its possible or not?
Can anyone guide how to integrate? Thanks in advance.
Edited by: Deejoy on Aug 10, 2011 11:46 AM

Hi,
have you checked this [http://help.sap.com/saphelp_nw70/helpdata/EN/42/e704f8999a3ee8e10000000a1553f7/frameset.htm|http://help.sap.com/saphelp_nw70/helpdata/EN/42/e704f8999a3ee8e10000000a1553f7/frameset.htm]
[http://help.sap.com/saphelp_sm40/helpdata/en/8a/b0278648ac4f058a7111c3f9b60feb/content.htm|http://help.sap.com/saphelp_sm40/helpdata/en/8a/b0278648ac4f058a7111c3f9b60feb/content.htm]
and here [service desk 3rd party interface|https://websmp207.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000538663&_SCENARIO=01100035870000000202&_OBJECT=011000358700003503092006E]
and check in IBM internal portal itself, you well get some doc.
Thanks,
Jansi

Solution Manager sync with ARIS

Similar Messages

Maybe you are looking for