Solution Manager; problem with SAPLSADC, DBM_CONNECT_PUR

Hi, I need help. What should do I do. In logs are some errors like this:
Directory: /usr/sap/SOL/DVEBMGS00/work
Name: dev_rfc2
Destination: NONE (handle: 3, , {42DBB323-B2C9-1AA8-E100-0000C0A8D220})
Trace file opened at 20050718 154733 CEST SAP-REL 640,0,71 RFC-VER 3
======> Name or password is incorrect. Please re-enter
ABAP Programm: SAPLSADC (Transaction: )
Called function module: DBM_CONNECT_PUR
User: SAPSYS (Client: 000)
Destination: NONE (handle: 5, , {42DBB325-B2C9-1AA8-E100-0000C0A8D220})
thanks

this system runs on Linux/MaxDB, Solution Manager 3.2 (latest SPL loaded)

Similar Messages

Solution Manager sync with ARIS

I believe I have done all the configuration to sync solution manager content with aris. I followed the instructions in the aris adminstration manual. I think I'm connecting ok with JCo, but I get the following error: function 'Z_SOLAR_READ_INSTALLED_COMPS'not found on SAP-Server
I have completed the transport of the two .sol files mentioned in the manual. Any ideas?
Thanks.

Hi,
look in SAP Function Builder and search for Z_SOLAR_READ_INSTALLED_COMPS. I'm sure, that your import failed or the function did not have been activated.
Here I have made a function test by my own (but for SAP ERP ECC6 - which is not the standard use). At the end of the article you can find the test method -> [ARIS BS 7.1 - VPN Handout|http://www.aris-user.de/aris/viewtopic.php?p=4722#4722]
So I rest with the best regrads
Yours sincerely
Sabrina Andrea Bangert - Herzogenrath 2009

Solutions for problems with QuickTime files in After Effects CC (12.0)

We have a new blog post up about solutions for problems with QuickTime files in After Effects CC (12.0) because of conflict with DVCPROHDVideoOut QuickTime components.
Please read that post and let us know here on this forum thread if you have any questions or comments.
Also, please let us know if the proposed solution works for you.

Mark - The new document that we published is meant to address a specific issue. You can confirm you have the issue by the following:
Adobe QT32 Server is not running when you receive these errors. Keep Activity Monitor open to track whether or not it is running.
The crash log for QT32 Server indicate CoreAudio as the last component called. You can find the crash logs in Users/username/Library/Logs/DiagnosticReports. The report will look like this:
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0   ???                                     0x04981f90 0 + 77078416
1   com.apple.audio.CoreAudio               0x949d05c1 __Call_block_invoke_03 + 56
2   libdispatch.dylib                       0x94a90f8f _dispatch_call_block_and_release + 15
If this is not the issue you're having, please start a new thread and provide the usual data. If your problem does match this issue, please double-check that you've followed the steps in the new document and post back here.

Handling Solution Manager changes with ChaRM (ChaRM on SolMan PRD)

Hi Experts,
Having deployed ChaRM to satellite system (three system landscape) we became interested in handling Solution Manager changes with ChaRM. We have operable ChaRM in SolMan 4.0 SP12.
We have DEV and PRD for SolMan so we are talking about two system landscape.
Has anyone of you done this? Does it go the same way as if SolMan was a real satellite system (rfc's=>tms=>ibase=>organization=>project=>MC=>CRs = order of configurations roughly).
I tried searching specific instructions for this deployment but it seems that configuration guides etc focus on satellite system handling. Our need is basically to document and control SolMan changes and with ChaRM we could.
Perhaps there is no magic to this and everything goes just like in satellite, but I would appreciate any experiences others may have had doing this.
Kind regards,
Auli

Hello,
We have implemented this with two systems landscape where in we have in place a Solution Manager Dev system and Solution manager Production system both are SOLMAN 4.0 with SP12. So the path for us to move the changes is from Development Systems to Production system.
We have ChaRM between the Dev and production. We reapplied the satellite system concept. For us the Solution manager Prod is a satellite systems all the changes that we move from Development system to Production systems is tracked with necessary documentation in the ChaRM process.
Yes, I agree with you that this is not any big magic. Working with two SOLMAN implementation, I strongly feel that SAP needs to have well rounded ChaRm processes. We have robust Change Management Process, but when we moved to ChaRM we were limited functionality of the ChaRM processes.
I had approached and did some research on how other companies are implementing the same process. Most of them have almost the same process for tracking SOLMAN changes. I am still look out for improved process to manage SOLMA changes.
Hope this helps!!! Thanks
Vish

SAP Solution Manager SR1 with MSSQL on W2K3 IA32 - Problem with Kernel

Hello,
we are implementing a sandbox in order to test the SAP Solution Manager 4.0 SR1 with MSSQL on W2K3 IA32. Therefore we ordered the installation CD for the above mentioned configuration. Instead of getting the SAP NETWEAVER Kernel SR1 we got SR2. Now we have the problem, that the installation program SAPINST is requesting the SR1- Kernel.
Unforunately the SR1-Kernel seems no longer available in the download section.
It would be fine to get a suggestion how to solve the problem.
Thanks
Best regards
Ralf Richter ([email protected])

Hi Andreas,
thanks for the hint, I have already checked the LABEL.ASC. I have no LABEL.ASC-Key for the SAP Netweaver 2004s SR1, so it would be a possibilty to substitue this key. But neverhteless, I think, there should be another official procedure in order to use the SR2 instead of the old SR1. I have contacted Klaus Billing at SAP as recommended in the OSS Note 918078. Best regards. Ralf R.

Solution Center problem with HP Office Jet J4550 and windows 7 (64bit)

Hello All,
I have a problem. I have the Solution Center and a HP Office Jet J4550 and windows 7 (64bit). When ever I open the solution center, the solution center says " HP office jet J4550 series disconnected" When I open HP document manager, I can access the printer. Additionally, when I run the HP Print Diagnostic Utility 4.0, it sees the printer, no issues. I can print test pages. No issues. I downloaded the latest driver from the HP site (OJJ4500_Full_13, 299,359KB) Your insight is appreciated.
Thank you
Roy B

I have a similar problem with the J4580 and my new Windows 7 64-bit laptop. HP Solution Center says that the printer is disconnected. Furthermore, it can print some documents (short ones), but it was unable to print a 1-page 5MB pdf file. The printer truncated the page after printing just the top 10%. The printer is OK with my wife's Windows 7 32-bit laptop.
I've seen many other people complain about similar problems in this and other forums. Apparently the driver for J4500 printers is not compatible with Windows 7 64-bit. Can HP please provide an updated driver or patch?

Solution Manager Integration with Tivoli and TSRM

Hi,
Has anyone done an integration of SAP Solution manager with Tivoli or TSRM. Solution Manager can perform the same capabilities of Tivoli or TSRM of monitoring and Service desk. However we want to use the best of both. I would appreciate if if someone can share thier thoughts on this.
Regards
Jasvinder

Hi,
Heres a good news for you.
IBM Tivoli Service Request Manager version 7.1 software has now SAP-certified for integration with SAP Solution Manager 7.0 via the service desk interface scenario (SMG-SDI 4.0).
[The News|http://www.cbronline.com/news/ibm_launches_new_service_to_help_automate_it_service_desk_operations_091013]
To Inegrate refer [this guide.|http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e3eeb4a8-0b01-0010-bd99-f4a700a49d32]
Hope this will solve your problem.
Feel free to revert back.
-=-Ragu

Import Manager - Problem with 0..n field in Import Manager

Iu2019m having problems with XMLs that contain multiple or single tags in MDIS process. For example: I did the map using a XML with multiple tags for Address:
<address>
<item>
u2026
</item>
<item>
u2026
</item>
</address>
When I send two address or more Address, the Import Server work fine, but when I send only one Address, the address is not imported.
<address>
<item>
</item>
<item>
</item>
</address>
Opening the xml file with only one Address in Import Manager, I saw that the fields isnu2019t mapped, but when I open a xml file with multiple Address itu2019s open correctly.
The XSD cardinality for the Address\Item is 0..n

Hi Evandro ,
If it is processing the input file correctly through the Manul Import manager process then update your latest Map by using SAVE As option or else save this correct map with a new name altogether and use this new map in the port for automatic importing.
If your file is able to process correctly through the Import manager without showing any errors till the Import step in the Import manager then this map must be correct and shoul automate the importing correctly.
Provided you are using the similar file for automatic importing as well.The file name and the fields as well as the value mapping as saved in this corrected map must not differ with the input file else this saved map will not be able to import correctly.
Check to see if you have made correct setting for automatic importing by refering the below link:
http://help.sap.com/saphelp_mdm550/helpdata/en/43/12036df94c3e92e10000000a1553f6/frameset.htm (Automatic importing MDIS - Import manager ref guide>MDM import server(MDIS)>MDIS Consfiguration)
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8973bcaf-0801-0010-b7a7-f6af6b1df00e(mdm import and syndication server)
Also check the exception folders if your import is not taking place automatically:
http://help.sap.com/saphelp_mdm550/helpdata/en/43/12036df94c3e92e10000000a1553f6/frameset.htm (Exceptions- MDM Import Manager MDIS-Exception handling)
Hope It Helped
Thanks & Regards
Simona Pinto

Inventory management problem with WS-C2950-24 on CWLMS 4.0

Hi Joe,
I have a problem with inventory management wiht 2950- 24 switches on which I am not able to capture inventory as well as the configurations. The IOS version is 121-22.EA13 and featureset is i6k2l2q4-mz. However, when I troubleshoot it, all the transport protocols (Telnet, ssh, tftp etc) shows success.
Thanks,
Best Regards // Rajiv

Inventory uses snmp to communicate to device. Please check you device has snmp configured and LMS has correct SNMP RO credentials added to it.
Please try to do a manual snmpwalk from LMS server (using device centre > tools) and see the walk succeeds.
Then again try to run the inventory from LMS server on this perticular device and if it fails, share the failure result/screenshot etc details. NMSROOT/log/ic_server.log as well.
-Thanks

Solution Manager Integration with Maximo

Hi All,
I believe all you know what is Maximo. Those who do not know, I would like to take an opportunity to brief them about the same.
Maximo is a ticketing tool from IBM. This tool is basically used to record and keep track of all change requests taking place in SAP landscape.
Having explained in brief above about Maximo, may somebody please tell me if this can be integrated with Solution Manager?
Has anybody done it before? If so, may you please share your experience with me?
Hope to get reply.
Regards,
Faisal

Hi Faisal,
If you could share your findings and docs and plan if possible , would be appreciated.
I have gone through the SAP notes for integration of Service desk with third party ticketing tools and some white papers on SDN but it does not help much.
Thanks,
Regards,
Kaustubh.

Solution Manager Interface with Tools Outside SAP

Does anyone have information on Solution Manager's abilities to interface with tools outside of SAP? I am interested in interfacing Solution Manager with legacy systems and main frame systems (e.g. Informatica). I am especially concerned with Root Cause Analysis, Exception Analysis, and Error Reporting in Solution Manager regarding non-SAP systems. Also, if Solution Manager is able to interface with these systems, can it access details from outside SAP (e.g. data from legacy systems)?

Hi,
The solution manager can be interface with the ARIS.We did in our project this interface.
The Business process flow was defined in ARIS & synchronize with the solman & once configuration is done then we reverse synchronize the same to update the ARIS,so you can interface with legacy also.
Regards,
Raj.

Linking solution manager projects with CHARM implementation project

Hi Guys,
Currently i am working in CHARM implementation project, i have created one CHARM implementation project with urgent correction and i am able to create the Transport request and release the transport request succesfully and i am able to move it to quality system successfully. But my customer is asking to link the solution manager project to CHARM implementation project.
Earlier before implementing CHARM they have implemented project managent in solution manager, during that project they have created so many projects which are currently running, now they want those projects to be linked CHARM implementation project.
When ever they create a transport request through CHARM they want the TP to be saved under a respective project which they are using currently. but according to my knowledge the TP can be saved under CHARM implementation project only.
Now i want to know whether the projects created in SOLAR_PROJECT_ADMIN can be linked to CHARM implementation project. Pls give ur valuable inputs as it is very urgent.
Thanks&Regards
Raju

Hello,
We have implemented this with two systems landscape where in we have in place a Solution Manager Dev system and Solution manager Production system both are SOLMAN 4.0 with SP12. So the path for us to move the changes is from Development Systems to Production system.
We have ChaRM between the Dev and production. We reapplied the satellite system concept. For us the Solution manager Prod is a satellite systems all the changes that we move from Development system to Production systems is tracked with necessary documentation in the ChaRM process.
Yes, I agree with you that this is not any big magic. Working with two SOLMAN implementation, I strongly feel that SAP needs to have well rounded ChaRm processes. We have robust Change Management Process, but when we moved to ChaRM we were limited functionality of the ChaRM processes.
I had approached and did some research on how other companies are implementing the same process. Most of them have almost the same process for tracking SOLMAN changes. I am still look out for improved process to manage SOLMA changes.
Hope this helps!!! Thanks
Vish

Solution manager integration with Hp QC

Hi Team ,
We are trying to integrate Solution manager 7.0 with Hp quality center 9.2 ,i have installed the component ST-QCA ,but even after that i am not able to find the node to activate QC under SAP Solution manager>Configuration>scenario specific settings-->activate solution manager enhancements
could u please tell ,if i have missed something
regards
Praveen

Hi,
With the EhP1, the menu was changed... Follows the way:
SAP Solution Manager Implementation Guide -> SAP Solution Manager -> Scenario-Specific Settings -> Third Party Integration -> SAP Quality Center by HP -> Integration Test Management ...
Is this?
Thanks.
Good Lucky!
Best regards,

Travel management - problem with post a trip for an employee in India

Hi,
I am configure travel management for a customer, in there SAP system. I have already made the configuration for countries like Sweden, Finland, Italy, Germany etc, but when I should do it for India I can not save a trip in PR05. I have copied the configuration (schema) from Sweden to India (India has no schema in standard) and that is no problem, but when I should enter a trip and save in PR05 I have the following problem:
1. It seems like I am in US because travelling country is per default USA (it should be India when I have linked the employee to the company code for India in transaction code PO13 and PA40). I can change the country to IN (India).
2. When I enter an expense type and amount, the system have a tax code for USA per default (I have configured that this expense type should choose a tax code in India but the system choose one for USA). I can change it to an Indian tax code.
3. The system also ask for a tax jurisdiction code on the row for expense type. Here I can choose 9999 as a dummy. But I have no idea why I have to specify that. I think that is typical for USA?
4. When I have changed the country to IN, the tax code to an indian tax code and specified the jurisdiction tax code to 9999 and then save I have got the following error message:
" Customization for 1600 j_1iindcus missing in table
Message no. 8I303" and when I have googled on that error message I found that I should go to:
IMG-Logistics General-Tax on Goods movement -India-Basic Settings-Maintain COmpany code settings
but that is according to logistics and everything else in the system as purchase etc is working fine with no problem with tax jurisdiction code so I don´t guess that I should change anything there if I destroy anything else.
5. If I change the country to IN and not register any trip expense but instead register trip segment, that the employee should have compensation for travelling with its own car and then save I have got the message that I have not maintained the currency USD/rupie which is a sign of that the systém beleives that we are in USA.
Please help. I have no idea how to come around this.
Best regards Lisa

Hi again,
In transaction code FITVFELD I have IN as default country but if I change that country to another I still have US as trip country in PR05. In that transaction code (FITVFELD) I have domestic trip, international etc (like configuration in Sweden), but when I initialize a new trip for India I can not change trip type, if there is a domestic or international. When I do the same for Sweden I can choose so I wonder if the system get the information from USA from anywhere else.
I have also read about jurisdiction code and that is special for USA and Canada and then not for India?
Regards Lisa

Solution Manager Interfacing with Remedy

How do we interface Remedy (Ticketing tool ) to Solution Manager and is it mandate to enable Solution Manager Service Desk for an effective ChaRM implementation or can we use the existing Remedy tool interfaced directly to Sol Man.

Some Discussion about Remedy And Solution Manager,
Solution Manager - Service Desk + Remedy Integration
And Yes BMC Remedy can be integrated with solution Manager, so please Contact Remedy to guide you on this one.
Regards
Shailesh Mamidwar

Solution Manager; problem with SAPLSADC, DBM_CONNECT_PUR

Similar Messages

Maybe you are looking for