[SOLVED] After migrating to x86_64 Intel HDA sound no longer works

I've been using ArchLinux x86 on the same system for quite a while, but I decided to give x86_64 a try again so I reinstalled Arch (by reinstall I mean a clean one - including / partition format).
Whenever I try to play a sound "socket(): Address family not supported by protocol" error comes up. If the same application tries to access audio devices again, no error is being repeatedly outputed again, thus it still hangs for a few seconds. For instance, if I receive a new mail on Thunderbird application, it has to play a sound while showing a notification, but not only that it doesn't, it also hangs for a few seconds.
"alsaconf" does not find my sound card, even though it is listed in lspci:
ernestas ~ $ lspci | grep dio
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02)
ernestas ~ $
I've tried many solutions I could find online, but none worked. ALSA did find my card while using x86 version of ArchLinux with newest packages. Could anyone help me out?
Last edited by ernetas (2011-08-05 12:20:48)

Here it is:
ernestas ~ $ lspci
00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 02)
00:01.0 PCI bridge: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port (rev 02)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02)
00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02)
00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 02)
00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92)
00:1f.0 ISA bridge: Intel Corporation 82801IR (ICH9R) LPC Interface Controller (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 4 port SATA IDE Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02)
00:1f.5 IDE interface: Intel Corporation 82801I (ICH9 Family) 2 port SATA IDE Controller (rev 02)
01:00.0 VGA compatible controller: nVidia Corporation G92 [GeForce 8800 GT] (rev a2)
03:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02)
03:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02)
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01)
05:00.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 61)
05:00.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 61)
05:00.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 63)
05:02.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11)
05:02.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11)
ernestas ~ $

Similar Messages

  • After migrating to iPad 2, the sound no longer works in many applications.

    I just upgraded from ipad1 to ipad2 and trasferred most of the apps. However, many of them now have no sound. E.g., skype and youtube videos work fine,
    but things like the Time Warner Cable app, Al Jazeera app, CNBC app, all now have video with no sound. The volume button doesn't even bring up the usual
    floating menu when using those applications. Anyone else notice the same problem?

    Hi, I seem to have a similar problem with my IPad. My switch is on rotation lock as it seems it is supposed to be there, but when I receive calls with Skype It rings but I can't hear anyone speaking and I have video in YouTube, but yet again no sound. My IPad sounds work perfectly - I just have this one problem. Can you maybe give me some advice please?

  • Sound no longer working after graphics card installation

    Okay, so my problem is:
    I recently added a graphics card to my windows 8.1 PC. The card itself works fine (a GTX 750Ti), but since installing it my sound no longer works from either port. Things I have already tried:
    Rebooting (obviously)
    Taking the card out and then replacing it
    Going through all the control panel audio settings (more on this later)
    Disabling the HDMI audio on the card
    Trying different (provably working) speakers and headphones
    Updating/installing drivers (not that you need them for headphones)
    The "playback devices" screen declared that nothing whatsoever is plugged in (it is). I'm concerned I might have damaged something during installation, but nothing seems obviously damaged, and I would have expected static to either do no damage
    or wipe out the entire motherboard. The back port is working, so it isn't the cable. My monitor output is HDMI (with no speakers on the monitor), if that makes any difference.
    Penny for anyone's thoughts?

    The back port is working, so it isn't the cable.
    I’m confused as to what this means. If you have audio via the ports on the back of the computer but not in front ports you may have damaged the front audio cable or connection on the motherboard
    or at the front ports. Find the HD Audio (or AC’97) port on your motherboard and verify that the cable is connected and intact, then follow this cable forward to your front audio ports. If you stressed this cable by tugging or pushing, it could have damaged
    the connection to the front ports. Sometimes these ports are connected by a header like the motherboard and this connection could have come loose.
    Brandon
    Windows Outreach Team- IT Pro
    Windows for IT Pros on TechNet

  • After updating to 10.10.2, iPhoto no longer works.

    Problem description:
    After updating to 10.10.2, iPhoto no longer works.
    EtreCheck version: 2.1.8 (121)
    Report generated March 25, 2015 at 1:32:57 PM ADT
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        iMac (21.5-inch, Late 2009) (Technical Specifications)
        iMac - model: iMac10,1
        1 3.06 GHz Intel Core 2 Duo CPU: 2-core
        4 GB RAM Upgradeable
            BANK 0/DIMM0
                Empty  
            BANK 1/DIMM0
                Empty  
            BANK 0/DIMM1
                2 GB DDR3 1067 MHz ok
            BANK 1/DIMM1
                2 GB DDR3 1067 MHz ok
        Bluetooth: Old - Handoff/Airdrop2 not supported
        Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
        NVIDIA GeForce 9400 - VRAM: 256 MB
            iMac 1920 x 1080
    System Software: ℹ️
        OS X 10.10.2 (14C1514) - Time since boot: 2:0:14
    Disk Information: ℹ️
        Hitachi HDT721050SLA360 disk0 : (500.11 GB)
            EFI (disk0s1) <not mounted> : 210 MB
            Macintosh HD (disk0s2) / : 499.25 GB (232.14 GB free)
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
        PIONEER DVD-RW  DVRTS09 
    USB Information: ℹ️
        Apple Inc. Built-in iSight
        Apple Internal Memory Card Reader
        Apple, Inc. Keyboard Hub
            Apple, Inc Apple Keyboard
        Apple Computer, Inc. IR Receiver
        Microsoft Microsoft Basic Optical Mouse v2.0
        Apple Inc. BRCM2046 Hub
            Apple Inc. Bluetooth USB Host Controller
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Kernel Extensions: ℹ️
            /Library/Extensions
        [loaded]    at.obdev.nke.LittleSnitch (4234 - SDK 10.8) [Click for support]
    Startup Items: ℹ️
        ChmodBPF: Path: /Library/StartupItems/ChmodBPF
        Startup items are obsolete in OS X Yosemite
    Launch Agents: ℹ️
        [running]    at.obdev.LittleSnitchUIAgent.plist [Click for support]
        [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [loaded]    com.divx.dms.agent.plist [Click for support]
        [loaded]    com.divx.update.agent.plist [Click for support]
    Launch Daemons: ℹ️
        [running]    at.obdev.littlesnitchd.plist [Click for support]
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [loaded]    com.ambrosiasw.ambrosiaaudiosupporthelper.daemon.plist [Click for support]
        [not loaded]    com.maintain.AutoLoginUserScreenLocked.plist [Click for support]
        [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
        [loaded]    net.waterroof.rules.plist [Click for support]
        [loaded]    org.tcpdump.chmod_bpf.plist [Click for support]
    User Launch Agents: ℹ️
        [loaded]    com.adobe.ARM.[...].plist [Click for support]
        [failed]    com.goacemjobhmmbdlbbfjgifjcojdfnjfm.updater.plist [Click for support] [Click for details]
        [loaded]    com.google.keystone.agent.plist [Click for support]
        [loaded]    com.Livestation.plist [Click for support]
    User Login Items: ℹ️
        Safari    Application  (/Applications/Safari.app)
        AdobeResourceSynchronizer    Application  (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
        ClamXavSentry    UNKNOWN  (missing value)
        ClamXavSentry    UNKNOWN  (missing value)
        ClamXav Sentry    UNKNOWN  (missing value)
        ClamXav Sentry    Application  (/Applications/ClamXav.app/Contents/Resources/ClamXav Sentry.app)
        ExpanderDaemon    Application  (/Applications/StuffIt/StuffIt Expander.app/Contents/MacOS/ExpanderDaemon.app)
        RealPlayer Downloader Agent    Application  (/Users/[redacted]/Library/Application Support/RealNetworks/RealPlayer Downloader Agent.app)
    Internet Plug-ins: ℹ️
        AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
        Flash Player: Version: 16.0.0.296 - SDK 10.6 Outdated! Update
        EPPEX Plugin: Version: 3.0.5.0 [Click for support]
        DivX Web Player: Version: 3.2.4.1250 - SDK 10.6 [Click for support]
        AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
        Scorch: Version: 6.1.0 [Click for support]
        iPhotoPhotocast: Version: 7.0
        RealPlayer Plugin: Version: Unknown
        DirectorShockwave: Version: 12.0.7r148 - SDK 10.6 [Click for support]
        PDF Browser Plugin: Version: 2.3.2 [Click for support]
        FlashPlayer-10.6: Version: 16.0.0.296 - SDK 10.6 [Click for support]
        QuickTime Plugin: Version: 7.7.3
        AdobeAAMDetect: Version: AdobeAAMDetect 1.0.0.0 - SDK 10.6 [Click for support]
        Silverlight: Version: 5.1.10411.0 - SDK 10.6 [Click for support]
        OVSHelper: Version: 1.1 [Click for support]
        Google Earth Web Plug-in: Version: 5.2 [Click for support]
        Default Browser: Version: 600 - SDK 10.10
        Flip4Mac WMV Plugin: Version: 3.2.0.16   - SDK 10.8 [Click for support]
        SharePointBrowserPlugin: Version: 14.4.8 - SDK 10.6 [Click for support]
        JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
    User internet Plug-ins: ℹ️
        RealPlayer Plugin: Version: Unknown [Click for support]
        Google Earth Web Plug-in: Version: 7.1 [Click for support]
    Safari Extensions: ℹ️
        AdBlock
        iMedia Converter Deluxe 
        WOT
    3rd Party Preference Panes: ℹ️
        Flash Player  [Click for support]
        Flip4Mac WMV  [Click for support]
        Perian  [Click for support]
    Time Machine: ℹ️
        Skip System Files: NO
        Mobile backups: OFF
        Auto backup: NO - Auto backup turned off
        Volumes being backed up:
            Macintosh HD: Disk size: 499.25 GB Disk used: 267.11 GB
        Destinations:
            Time Machine [Local]
            Total size: 333.40 GB
            Total number of backups: 45
            Oldest backup: 2014-10-23 13:20:11 +0000
            Last backup: 2015-03-25 16:16:56 +0000
            Size of backup disk: Too small
                Backup size 333.40 GB < (Disk used 267.11 GB X 3)
    Top Processes by CPU: ℹ️
             4%    WindowServer
             1%    RealPlayer Downloader Agent
             0%    AppleSpell
             0%    ClamXav Sentry
             0%    fontd
    Top Processes by Memory: ℹ️
        176 MB    clamd
        172 MB    Finder
        94 MB    mds_stores
        73 MB    Preview
        47 MB    Dock
    Virtual Memory Information: ℹ️
        958 MB    Free RAM
        1.48 GB    Active RAM
        795 MB    Inactive RAM
        616 MB    Wired RAM
        4.25 GB    Page-ins
        24 MB    Page-outs
    Diagnostics Information: ℹ️
        Mar 25, 2015, 01:08:22 PM    /Library/Logs/DiagnosticReports/iPhoto_2015-03-25-130822_[redacted].hang
        Mar 25, 2015, 11:30:42 AM    Self test - passed
        Mar 23, 2015, 03:49:37 PM    /Library/Logs/DiagnosticReports/iTunes_2015-03-23-154937_[redacted].cpu_resourc e.diag [Click for details]
        Mar 23, 2015, 12:06:35 PM    /Library/Logs/DiagnosticReports/MP Navigator EX 2.0_2015-03-23-120635_[redacted].cpu_resource.diag [Click for details]
        Mar 22, 2015, 03:32:47 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/iTunes_2015-03-22-153247_[reda cted].crash
        Mar 25, 2015, 12:47:08 PM    /Library/Logs/DiagnosticReports/iPhoto_2015-03-25-124708_[redacted].hang
        Mar 24, 2015, 05:37:33 PM    /Library/Logs/DiagnosticReports/iTunes_2015-03-24-173733_[redacted].cpu_resourc e.diag [Click for details]
        Mar 24, 2015, 12:42:30 PM    /Library/Logs/DiagnosticReports/MP Navigator EX 2.0_2015-03-24-124230_[redacted].cpu_resource.diag [Click for details]

    What version of iPhoto do you have?  With Yosemite you must be running iPhoto 9.6.1 which is a available from the App Store.  If your previous version of iPhoto was iPhoto 7 (08) or earlier you'll have to download and apply the  iPhoto Library Upgrader 1.1 to the library before opening it with iPhoto 9.6.1. It'll be located in the Applications/Utilities folder after downloading.
    Now for your system:
    Startup Items: ℹ️
        ChmodBPF: Path: /Library/StartupItems/ChmodBPF
        Startup items are obsolete in OS X Yosemite
    Either remove this or update it so it's compatible with Yosemite.
    Get rid of the antivirus software as rkaufmann87 mentioned.  It's not needed.
    User Launch Agents: ℹ️
        [failed]    com.goacemjobhmmbdlbbfjgifjcojdfnjfm.updater.plist [Click for support][Click for details]
    Don't know what this is for.  There was no info on Google about it so remove it.
    Currently you're not having any memory problems since your Page-outs are essentially non existent. You can check it as you work with Activity Monitor.
    Virtual Memory Information: ℹ️
        958 MB    Free RAM
        1.48 GB    Active RAM
        795 MB    Inactive RAM
        616 MB    Wired RAM
        4.25 GB    Page-ins
        24 MB    Page-outs
    As long as the memory pressure is in the green and constant and you're not seeing a lot of SWODs you shouldn't be concerned about the memory.  Of course increasing memory will nearly always improve general system and application performance. But you didn't mention slowness as part of your problem.

  • After upgrading to Windows 8.1 iCloud no longer works on my PC

    After upgrading to Windows 8.1 iCloud no longer works on my PC

    I have the same problem - my data had better not be gone!  Why won't Apple address this problem?

  • HT204266 The sound no longer works on my ipad?

    The sound no longer works on my iPad although when I put headphones in it does. When I press the volume button it comes up as "sound effects" but with no dots that would normally go up or down. When I double click the start button there is the normal volume bit but no button to move up or down. Has anyone ever had this before?

    The disappearing sound is typically one of three things that could be going on. Read this and see which one applies to your situation.
    1. If you have no sound at all, even in the Music App, try rebooting the iPad.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
    2. If you lost sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds may have been muted.
    System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
    Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
    If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
    If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
    If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
    This support article from Apple explains how the side switch works.
    http://support.apple.com/kb/HT4085
    3. If you still have no sound at all - except when using headphones ....try cleaning the dock connector opening of the iPad with a soft brush and just a little bit of rubbing alcohol.

  • After updating to Lion my external monitor no longer works!

    I used a external lcd tv to use split screen on my Macbook Pro. After updating to Lion this week it no longer works. First I thought it was my HDMI adapter but I have replaced it and nothing is still working. I've read that people using more than one problem have been having issues but i just have the one external monitor. Help Please!

    I found a discussion thread here which seems to do the trick.  Like you I've authorized, de-authorized etc, but renaming the files seemed to be the only thing that worked.  Here's the detail:
    https://discussions.apple.com/thread/3477094?start=0&tstart=0

  • The sound no longer works in my husband's iPad and it keeps shutting itself down. This started today. We checked all the settings and everything looks right. Is there something we might be missing?

    The sound no longer works in my husband's iPad and it keeps shutting itself down. This started today. We checked all the settings and everything looks right. Is there something we might be missing?

    Try a reset first: Press and hold both Sleep/Wake and Home buttons until the Apple logo appears.
    If the reset doesn't fix it, try a restore:
    http://support.apple.com/kb/HT1414

  • My sound no longer works, my sound no longer works

    Since i downloaded new OS my sound no longer works, this if for itunes, spotify and trying to listen to youtube videos

    I just found out that a few of my slideshows have the music intact.  For the rest, it looks like I will have to go through the cumbersome process of re-loading the music.
    I can't tell is this was caused by the Mavericks upgrade or Iphoto Update.

  • My sound no longer works on my Apple 5c cell phone.  What should the settings be?

    My sound no longer works on my phone.  What should the settings be?

    What do you by "what should the settings be?  Volume is either up or down.

  • Sound no longer works after upgrade to Windows 8.1

    System:
    Operating System
    Windows 8.1 64-bit
    CPU
    Intel Core i5 3330 @ 3.00GHz
    23 °C
    Ivy Bridge 22nm Technology
    RAM
    8.00GB Dual-Channel DDR3 (11-11-11-28)
    Motherboard
    LENOVO MAHOBAY (SOCKET 0)
    18 °C
    Audio
    ASUS Xonar DGX Audio Device
    I sucessfully upgrading to Windows 8.1 and everything was functioning after the upgrade.  However, after the first time I restarted my system after the upgrade the intergrated soundcard no longer worked.
    I attempted to remove and reinstall the RealTek audio driver, downloading the newest 8.1 compatible driver from the Lenovo support site.
    The drive refused to installed, either via the executable or by manually installing the driver through a device manager upgrade.  
    So I attempted to install a stand alone soundcard, to no success.   
    In device manager this is displayed for both the integrated motherboard audio and the new Asus sound card:
    Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code
    52)
    If I disable the driver driver signature enforcement, neither audio option works.  Instead I get this error in device manager:
    "Windows cannot load the device driver for this hardware. The driver may be corrupted or missing.
    (Code 39)"
    Attempting to update the driver in device manager, Windows tell me I am on the most up-to-date, recommended driver, yet at the same time refuses to
    allow it to function.
    Extremely frustrating.
    Any help would be greatly appreciated.

    I have also attempted to clear out the registry Upper/Lower Filters to no success.
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E96C-E325-11CE-BFC1-08002BE10318}
    At that registry key, in the right window, is there, under "Name", either an UpperFilters orLowerFilters value?
    If so, for each of the UpperFilters and/or LowerFilters value, what is listed under "Data"?
    There could be an improper entry at one of these values which may be causing the problem.

  • Got iPhone 5.  Really Disappointed!  After 2 days, alert and typing sounds are not working.  Camera is terrible!

    Bought iPhone 5.  Really disappointed.  Within 2 days, alert sounds and typing sounds are not working.  Camera is terrible.  My old HTC One S was far superior!

    First, no, it is not showing orange.  I checked the silent button immediately.  Then I checked the sounds section of my settings, but all is good there.  When I get a phone call, it rings fine.  Alert and typing sounds are not working.
    Second..., yes this was a technical point (in which I was hoping someone else might have had the same problem, with a solution), as well as a complaint (definitely one worth making as it is not a minor issue - it is important to hear text alerts when you have children).

  • Sound no longer working on AAO ZG5

    I just reinstalled Arch on my ZG5 -- before I reinstalled everything sound-related was working by using snd-intel-hda and ALSA, all I had to do was add the line
    options snd-hda-intel model=acer-aspire
    in /etc/modprobe.conf, unmute the channels, and ALSA took it from there. After my reinstall, I did the same things I did to get it to work last time, and no sound appears, despite the device being listed.
    Here are outputs from commands that may be useful:
    aplay -l
    **** List of PLAYBACK Hardware Devices ****
    card 0: Intel [HDA Intel], device 0: ALC268 Analog [ALC268 Analog]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    cat /proc/asound/modules
    0 snd_hda_intel
    ls -l /sys/module/snd/holders
    total 0
    lrwxrwxrwx 1 root root 0 Mar 14 19:43 snd_hda_codec -> ../../snd_hda_codec
    lrwxrwxrwx 1 root root 0 Mar 14 19:43 snd_hda_codec_realtek -> ../../snd_hda_codec_realtek
    lrwxrwxrwx 1 root root 0 Mar 14 19:43 snd_hda_intel -> ../../snd_hda_intel
    lrwxrwxrwx 1 root root 0 Mar 14 19:43 snd_hwdep -> ../../snd_hwdep
    lrwxrwxrwx 1 root root 0 Mar 14 19:43 snd_mixer_oss -> ../../snd_mixer_oss
    lrwxrwxrwx 1 root root 0 Mar 14 19:43 snd_pcm -> ../../snd_pcm
    lrwxrwxrwx 1 root root 0 Mar 14 19:43 snd_pcm_oss -> ../../snd_pcm_oss
    lrwxrwxrwx 1 root root 0 Mar 14 19:43 snd_seq -> ../../snd_seq
    lrwxrwxrwx 1 root root 0 Mar 14 19:43 snd_seq_device -> ../../snd_seq_device
    lrwxrwxrwx 1 root root 0 Mar 14 19:43 snd_seq_oss -> ../../snd_seq_oss
    lrwxrwxrwx 1 root root 0 Mar 14 19:43 snd_timer -> ../../snd_timer
    ls -l /dev/snd
    total 0
    drwxr-xr-x 2 root root 60 Mar 14 19:36 by-path
    crw-rw---- 1 root audio 116, 6 Mar 14 19:36 controlC0
    crw-rw---- 1 root audio 116, 5 Mar 14 19:36 hwC0D0
    crw-rw---- 1 root audio 116, 4 Mar 14 19:36 pcmC0D0c
    crw-rw---- 1 root audio 116, 3 Mar 14 19:37 pcmC0D0p
    crw-rw---- 1 root audio 116, 7 Mar 14 19:36 seq
    crw-rw---- 1 root audio 116, 2 Mar 14 19:36 timer
    lsmod | grep '^snd'
    snd_seq_dummy 1119 0
    snd_seq_oss 25232 0
    snd_seq_midi_event 4568 1 snd_seq_oss
    snd_seq 41912 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
    snd_seq_device 4409 3 snd_seq_dummy,snd_seq_oss,snd_seq
    snd_hda_codec_realtek 224540 1
    snd_hda_intel 18988 0
    snd_pcm_oss 33950 0
    snd_hda_codec 64796 2 snd_hda_codec_realtek,snd_hda_intel
    snd_mixer_oss 15366 1 snd_pcm_oss
    snd_hwdep 4804 1 snd_hda_codec
    snd_pcm 59496 3 snd_hda_intel,snd_pcm_oss,snd_hda_codec
    snd_timer 15687 2 snd_seq,snd_pcm
    snd 43987 11 snd_seq_oss,snd_seq,snd_seq_device,snd_hda_codec_realtek,snd_hda_intel,snd_pcm_oss,snd_hda_codec,snd_hwdep,snd_mixer_oss,snd_pcm,snd_timer
    snd_page_alloc 6021 2 snd_hda_intel,snd_pcm
    cat /etc/rc.conf
    # /etc/rc.conf - Main Configuration for Arch Linux
    # LOCALIZATION
    # LOCALE: available languages can be listed with the 'locale -a' command
    # HARDWARECLOCK: set to "UTC" or "localtime", any other value will result
    # in the hardware clock being left untouched (useful for virtualization)
    # TIMEZONE: timezones are found in /usr/share/zoneinfo
    # KEYMAP: keymaps are found in /usr/share/kbd/keymaps
    # CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
    # CONSOLEMAP: found in /usr/share/kbd/consoletrans
    # USECOLOR: use ANSI color sequences in startup messages
    LOCALE="en_GB.UTF-8"
    HARDWARECLOCK="UTC"
    TIMEZONE="Europe/London"
    KEYMAP="uk"
    CONSOLEFONT=
    CONSOLEMAP=
    USECOLOR="yes"
    # HARDWARE
    # MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
    # MOD_BLACKLIST: Prevent udev from loading these modules
    # MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
    # NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
    MOD_AUTOLOAD="yes"
    #MOD_BLACKLIST=() #deprecated
    MODULES=(!snd-pcsp acpi_cpufreq r8169 pciehp ath5k !uvcvideo)
    # Scan for LVM volume groups at startup, required if you use LVM
    USELVM="no"
    # NETWORKING
    # HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
    HOSTNAME="helios"
    # Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
    # Interfaces to start at boot-up (in this order)
    # Declare each interface then list in INTERFACES
    # - prefix an entry in INTERFACES with a ! to disable it
    # - no hyphens in your interface names - Bash doesn't like it
    # DHCP: Set your interface to "dhcp" (eth0="dhcp")
    # Wireless: See network profiles below
    #Static IP example
    #eth0="eth0 192.168.0.2 netmask 255.255.255.0 broadcast 192.168.0.255"
    eth0="dhcp"
    INTERFACES=(eth0)
    # Routes to start at boot-up (in this order)
    # Declare each route then list in ROUTES
    # - prefix an entry in ROUTES with a ! to disable it
    gateway="default gw 192.168.0.1"
    ROUTES=(!gateway)
    # Enable these network profiles at boot-up. These are only useful
    # if you happen to need multiple network configurations (ie, laptop users)
    # - set to 'menu' to present a menu during boot-up (dialog package required)
    # - prefix an entry with a ! to disable it
    # Network profiles are found in /etc/network.d
    # This now requires the netcfg package
    #NETWORKS=(main)
    # DAEMONS
    # Daemons to start at boot-up (in this order)
    # - prefix a daemon with a ! to disable it
    # - prefix a daemon with a @ to start it up in the background
    DAEMONS=(syslog-ng network netfs crond)
    Thanks for any help
    EDIT: Just tested with another distro and sound works out of the box with ALSA and the same output from the above commands... hm.
    Last edited by neurolysis (2011-03-14 21:36:48)

    Hi,
    Don't know if it is possible but what about using a small pin with strong glue? (depending on the force needed to get it out).
    /rob

  • Mail sounds no longer working

    After upgrading to Mountain Lion, the Mail app (6.0) no longer makes sounds for checking, sending, or receiving email messages.  Sounds are enabled in both Mail preferences as well as the mail section of Notifications.  Sounds elsewhere still work, just not in Mail.  Any thoughts?
    I've already searched for, and found, the various threads about activities Mail being curtailed (no spinning wheels for example).  I can think of no good reason to remove visual/audio feedback from an application (or make it configurable).

    Certainly.  This is something that has been around in Mac's for a very long time, but this Apple KB will tell you what to do.  Very simple:
    http://support.apple.com/kb/PH4405
    I've found since my post that I still occasionally lose sound, but quitting and restarting the Mail app has been sufficient; no need to reset the PRAM anymore.

  • Mail Sounds No Longer Work on iPhone 4.

    The sounds for mail, incoming or outgoing, no longer work on my iPhone 4 (4.3.3).  All it does is vibrate even though that is set to Off.   All the other feature settings are set to ON. I have checked all the sounds and they work, they just don't work with the Mail any more.  This is a MobileMe IMAP account.  I tried re-setting everything without deleting data and that made no difference.  The sounds worked perfectly up until a week or so ago.  Any ideas on how to have them function again?  In addition, when I connect the iPhone to my iMac (Snow Leopard 10.6.7) the phone also vibrates.  This is a new feature as well.  Any chance a setting in iTunes might have caused this, and, if so, how to remedy it.
    Thanks!

    Problem solved.  No further action.

Maybe you are looking for

  • Can't add new icloud account to iPhone says that I have too many accounts please help! Forgot old username and email

    I Made a new icloud account bc forgot my username and email and now I can't access bc says I have too many accounts on phone please help!

  • Netinfod errors in system.log

    These errors appear in my system.log every 30 minutes: Jan 8 09:18:03 bd netinfod local[54]: notify's udp binder connection to localhost[255.255.255.255]/local failed during opening (UDP) - socket_open failed Jan 8 09:18:03 bd netinfod local[54]: not

  • Show HTML in Java

    Hi, I need to show an HTML file in a JTextArea or similar....anyone could help? Does it maintain the Layout and Properties of the text specified in the HTML document??? Thanks all, AL

  • AAM not picking up Updates for CC (2014)

    I just noticed that my deployments of Adobe CC 2014 are not picking updates form my Internal Adobe Update Server. The Update Server seems to be working fine, and i can pull updates from Adobe fine, but the local machines are not getting any updates f

  • Finding minimum value from spreadsheet

    Hi, I am attaching here my spreadsheet. In that spreadsheet I want to find minimum value of column B and display the corresponding value at the same iondex from column A. Attachments: vna_readings.xlsx ‏14 KB