[Solved] archiso intermittent umount / target is busy error

Synopsys: Run build script in a native [Alt]-[F2...n] tty NOT in a tty started with polkit in an X session.
I get the error below immediately after the last app in packages.x86_64 is installed.
umount: /tmp/LUKS_HDD/linuK_ISO/work/x86_64/root-image/dev: target is busy.
I've pruned the package list all the way back to the original (which always seems to work) but as I progressively add my apps again sometimes it bombs and sometimes it doesn't but I can't quite figure out where the error is when it bombs.
This is all very similar to the symptoms mentioned here except that I do get the error message above and I am using the stock kernel.
Last edited by KairiTech (2014-02-13 20:47:51)

I had the same issue yesterday when following the guide from wiki: https://wiki.archlinux.org/index.php/Au … ork_mounts
So /srv/nfs4 gets mounted well - but the drive is busy, when you try to mount it for the 2nd time with /srv/nfs4/storage.
I resolved it temporarily by deleting "/srv/nfs4" from /etc/exports and setting fsid=0 to "/srv/nfs4/storage".

Similar Messages

Obligatory transport target for business system BS_DEV in SLD

Hi all,
   We are moving receiver detrmination from QA to PRD, there we are getting one error
"com.sap.aii.ibtransportclient.XiTransportException: caused by: ClientServerException exception:Impo
>>>rt failed because of business system transfer of object Receiver Determination   BS_DEV
>>>   *   *: Obligatory transport target for business system BS_DEV not found in Sys
>>>tem Landscape Directory caused by: com.sap.aii.ib.core.transport.api.PostprocessingException: Import
>>>failed because of business system transfer of object Receiver Determination   BS_DEV
*: Obligatory transport target for business system BS_DEV not found in Syste
>>>m Landscape Directory caused by: com.sap.aii.util.hmi.api.HmiMethodFault: caused by: ClientServerEx
>>>ception exception:Import failed because of business system transfer of object Receiver Determination
>>> BS_DEV      *   *:Obligatory transport target for business system WP
>>>C_Dev not found in System Landscape Directory caused by: com.sap.aii.ib.core.transport.api.Postproce
>>>ssingException: Import failed because of businesssystem transfer of object Receiver Determination
>>> BS_DEV     *   *: Obligatory transport target for business system BS_
>>>DEV not found in System Landscape Directory"
I am moving the same object from development to production, i feels ther is some problem in setting transport target.
BS_DEV target system is BS_QA, in development sld
BS_QA source system is BS_DEV anf target system Is BS_PRD in Quality sld
BS_PRD source system is BS_QA, in production.
The above error occurs when we are moving same object which i moved from development to quality to production.
whether i need to take obejct from quality and need to move that one to production, or i can use the same development object to production...?
Regards
Pradeep P N

Hi,
Even I am facing the same problem.
we have given the Transports Target as mentioned, but still facing the same error:
Deployment
Transport request   : DPIK900141
System              : QPI
tp path             : tp
Version and release: 375.30.25 710
CTS Deploy Service - Version 0.92 06.03.2007
========================================================================
Deploy Web service destination = CTSDEPLOY
Directory = /usr/sap/trans/data
SDM Deploy URL =
SLD Deploy URL =
XI Deploy URL = http://sqnpi1.sap.sgroupit:51600
Double-stack system QPI
Deploy for XID
Deploy File = 2f8021d0f9ca11dea81e001a64925608
Start of Web service log
Deploy Service called with following parameters:
CommunicationData-Type:1
CommunicationData-Address:http://sqnpi1.sap.spoolzgroupit:51600/dir
CommunicationData-Host:sqnpi1.sap.sgroupit
CommunicationData-Port:51600
CommunicationData-User:'filled'
CommunicationData-Password:'filled'
Deployable(0)
Deployable-Type:1
Deployable-Id:/usr/sap/trans/data/DPIK900041/2f8021d0f9ca11dea81e001a64925608
com.sap.aii.ibtransportclient.XiTransportException: caused by: ClientServerException exception:Impo
>>>rt failed because of business system transfer of object Receiver Determination   DPI   SI_POS_CH_SN
Returncode:'8'
Deployment
End date and time : 20100105151741
Ended with return code: ===> 8 <===
Can anyone guide to solve it.

Error: 28005, Severity: 16, State: 2...An exception occurred while enqueueing a message in the target queue. Error: 15517, State: 1. Cannot execute as the database principal because the principal "dbo" does not exist, this type of principal cannot be impe

I've seen some similar questions, but want to make sure I can get an answer quickly and how to fix.
Thanks,
Paul
spid24s Error: 28005, Severity: 16, State: 2
spid24s An exception occurred while enqueueing a message in the target queue. Error: 15517, State: 1. Cannot execute as the database principal because the principal "dbo" does not exist, this type of principal cannot be impersonated,
or you do not have permission.

Hi Paul,
I also had the same error on one of my servers, and it was because the user that created the database no longer worked for the company.
So when his AD account got deleted, the database had NULL as owner
Using the following query I asked for the owners of the databases:
select name, suser_sname(sid) from master.dbo.sysdatabases
So changing the owner of the databases that had a NULL owner solved the issue for me.
use <databasesname>
go
exec sp_changedbowner 'sa'
Thanks for triggering the solution.
Peter

How I fixed the 'network host busy" error

I've been down for a day solving the "network host busy' error.
First, I had fits trying to hook up this HP to my system. Here's the thread on that:
http://forums.techguy.org/networking/858081-laserjet-4500-mac-osx-10-a.html
Once all that was done, it was working.
The system was off and sometimes unplugged over the course of the evening.
I could not get it to work again.
It turned out that somehow during the course of events, the ip number of the printer had changed. I printed out the configuration page directly from the printer's configuration menu, and reset the ip address to match the new one.
Protocol in this case was HP Jet Direct socket.
Hope that helps someone out there. It looks like there are a lot of people tearing their hair out over this message and that there is no one solution.

I just found a solution to this problem and thought I would post it here, too.
I'm using a HP Photosmart C7280 with 10.6.1
Ever since updating to Snow Leopard, I kept receiving the "Network host busy" message. Today, I thought I would try running the network wizard feature on the printer itself, and after the printer connected to my router and I entered the password, the problem fixed itself. No more error message.
I'm not sure if this will work for everyone, but it did for me. Such an easy solution for such a headache-inducing problem.
Message was edited by: TNTWhite

Transport target for business system not found in System Landscape Director

Folks,
We have new installed new PI 7.1 system and importing interfaces from the OLD XI 3.0 system in to new PID 7.1 system.
We are getting following error when we try to import an interfaces in to new PID system:
Import failed because of business system transfer object
Communication component XID_FileSystem: Obligatory
transport target for business system XID_FileSystem not found in
System Landscape Directory
We are yet to install PIQ system.
All the interfaces in the old XID system have transport target of XIQ system. I removed the transport taget for the interface, but transport target is still showing in the Business system under transport target head.
How can we overcome this issue as we will not have PIQ system atleast for two weeks.
Thanks in advance,
Regards
Chandu

Hi,
You need to maintain Transport Groups and target for business systems while SLD transports between your XI system and PI 7.1
Illustrated with DEv & PRD here.
Procedure:
1) Call Integration Builder screen on DEV Server with http://hostname:J2ee Port/rep
2) Call SLD (System Landscape Directory) Component from the Integration builder
Save all the Following .zip files on the Local Desktop
3) Select the Software Component & say Export that you want to Export from DEV
Server to Production server and which is going to use in the IR of XI
4) Also Select the Product of the above SWC and say Export
5) Select the Technical Systems (TS of XI & TS of the SAP R/3) and say Export
6) Select the Business System(s) & say Export; those are associated with above Exported
Technical systems.
In Production Server
1) Logon to the SLD of the Production Server.
2) Create a Technical System and Business system which points to the Production SAP R/3
3) Go to Administration TAB in the main page of SLD
4) Select the Import option to Import the SWC , PRD, TS,& BS which we Exported Earlier in DEV Server
5) Click on Browse and select the .zip files that is to Import into Production Server,
Which were stored on the local desktop at the time of DEV Server Export
And say Import Selected File Option
By this we exported and imported the SLD Objects
Now we have to create transport groups and transport targets in the Production server of SLD
Creation of Transport Groups
Edit GroupsGroup1) Select the Business systems
2) Click on New Group and give the name of the group as DEV_group & select the
Corresponding Development serveru2019s integration Server
3) Similar way create another group for Production serveru2019s business system as
PRD_group and select the Production serveru2019s integration Server
Creation of transport targets
This is to Define which business systems in two different groups correspond to each other
1) Select each Business system in the SLD and select transport TAB---click on
Add/Change Target and select its corresponding target business system.
For Example:
If you select the business system of Production XI server means
In the target you have to select group as DEVGROUP and the business system of Development XI server.
Like this do the same for other business systems also
Ex:
BS_PRD_Integration Server----
BS_DEV_Inetration Server
How to create Transport Groups & transport Targets
http://help.sap.com/saphelp_nw04/helpdata/en/ef/a21e3e0987760be10000000a114084/content.htm
Regards
Seshagiri

DEV- QAS : Obligatory transport target for business system not found

Hi guys!
I have read all the other threads about this subject, but since I still have no success, I´m feeling obligated to ask you for a help (deadline approaching fast!)
I´m trying to transport a Communication Channel, from DEV environment to QAS. I'm having the 'usual' error:
Import failed because of business system transfer of object Communication Channel * | SIGA | SOAP_SYNC_SENDER: Obligatory transport target for business system SIGA not found in System Landscape Directory
Here were my steps:
Keep in mind that in DEV, everything was up and running: Software Component, Product, Technical System and Business System for this name "SIGA".
1 - In DEV, I created a new Technical System, named "SIGA_QAS", pointing to my QAS server. (Keeping in mind I already had a "SIGA" pointing to my DEV server.)
2 - Still in DEV, I did create two groups: GROUP_DEV and GROUP_QAS, one points to INTEGRATION_SERVER_DX1 (DEV) and the other INTEGRATION_SERVER_QX1 (QAS).
3 - Still in DEV, I created the Business System called "SIGA_QAS" also, pointing to my QAS server.
4 - Still in DEV, I went inside both Business Systems and put: "SIGA_QAS" as TARGET BS of "SIGA" (which automatically puts "SIGA" as SOURCE BS of "SIGA_QAS")
If I look at my QAS SLD, I can see all of these objects already there, since my BASIS team did activate the 'sync' between these two environments. So, I dont need to create anything 'new' in my QAS SLD, all the objects are there, same as DEV SLD.
If I try to EXPORT/IMPORT a simple Communication Channel (using file system or even CTS - I tried both) I get the error mentioned above.
But this is 'wierd' for me, since the error says: "business system SIGA not found in System Landscape Directory", but it is there, in both SLDs.
Am I missing something here?
Thanks!
Ricardo Sancio Lóra
Brazil

Hi,
If you not tried this then try it. Delete the Business System SIGA from Integration Directory in your QAS system and then again import the business system from SLD. Acitvate the changes and then import the CC from Dev to QAS.
Regards,
Sarvesh

Obligatorytransport target for business system not found in SLD

Dears,
We implemented CTS+ in our PI three system landscape.
While implementation we configured local SLD and after that for dev and QAs we configured a central SLD.
And for Production we have seprate SLD.
In DEV SLD we have three buisness systems:
File_Dummy of type DEv
File_Dummy_Q of type QAS
File_Dummy_P of type PRD
Now in transport target group of File_Dummy I put File_Dummy_Q and in File_Dummy_Q I put File_Dummy_P but for BS File_Dummy_P target group is empty.
Now I put all these BS into a request and import them in QAS then I get error:
Obligatorytransport target for business system File_Dummy_P not found in System Landscape Directory
Now I am not getting what to put in transport target of File_Dummy_P as it is of type.
I tried to put their File_Dummy_P but we can not put PRD type BS there.
I also tried with dev and qas BS there but still same error.
Please suggest how to resolve this error.
Regards,
Shivam

Hi,
did you transported the associated technical systems of your business systems....?
Also I assume you have assoicated the targets foryour business systems in SDL..
like for D targets are Q and P
for Q source is D and Target is P
for P sources are D and Q... if not assoicate the same...
and also make sure the three groups are available for three environments...
HTH
Rajesh

Obligatory transport target for business system SAPR3D not found in System

HI All ,
We have installed New PI 7.1 system and stared migrating the interfaces from XI 3.0 to PI 7.1 . in Devlopement system .
IR object have been successfully deployed but while delopying ID objects got the following error . Obligatory transport target for business system SAPR3D not found in System Landscape Directory.
When I checked with business system transport target was not defined ., Please suggest how to go ahead further .
Thanks ,
Prakash

Hi Ravi,
Please go through below disucssion it is on the same line of your question.
Transport target for business system not found in System Landscape Director

How & Where to create the Target Groups and Transport Targets for Business

Hi Experts,
I am Transporting the scenarios from Development 500 client XI system to Development 500 client PI7.1 system. I have taken the exports of Technical system and Business System from the DEV XI system and correspondingly have imported the same in the PI7.1 system. I can see the all the business system in the Business system SLD of the PI7.1 system. I would like to assign the Business System Groups and Transport Targets for every business system that I want to transport. How can I do that ? Whether this is to be done in DEV XI system or the DEV PI system? Can somebody elaborate the step by step method to create the Groups and Target system for the every Business system so that I can import the object of the Integration Directory sucessfully................................
Thanks & Regards
suk4023
Edited by: sukande on Aug 17, 2010 8:18 AM

Hi Supriya,
Thanks for the reply and good illustration............Still going further after defing the destination for transport in the source SLD Business system ( XI dev server) , then we should export it and subsequently import it in the SLD of the PI 7.1 ie the destination server. Then we should transport the objects of Integration Repository and Integration Directory to the new PI7.1 server. Is this the right way to proceed.? Hope that this will not give the error while importing the objects in Integration Directory. An typical which comes while importing the objects in the Integration Directory is as follows:-
*Import failed because of business system transfer of object Communication Component | PCM: Obligatory transport target for business system PCM not found in System Landscape Directory*
Pls clarify on this ......
Thanks & Regards
suk4023

"Network host busy" error

Hi, everyone. I have trawled this discussion list and followed all the advice available to no avail. Any help would certainly be appreciated.
The background is as follows:
MacBook Pro, 2.33GHz Intel Core 2 duo, 2GB RAM, currently running OSX 10.6.2. Software up to date. Previously on OSX 10.4.11 until 4 weeks ago. Printing to a networked HP 4100 with a fixed IP address in the office worked fine until last week, when a "Network host busy error, trying again in 30 seconds" error arose. Printing from the other workstations (iMacs on 10.6.2) on the network continues to proceed normally. Steps I have taken include deleting the HP4100 print queue and re-installing (several times) as IP>HPJetDirect socket to 192.168.1.100. Clearly the printer is online (it says so) and is identified as the correct printer driver is selected automatically (HP LaserJet 4100 series v 3010.107) and all the configurable options are correctly selected (trays 2,3 & 4, envelope feeder and duplex option) and toner supply levels are correctly read. Still get network host busy error. Rebooted the printer. No avail. Rebooted the router. No avail. Reinstalled HP printer drivers from here: http://support.apple.com/downloads/#printer%20drivers%20mac%20os%20x%20v10.6. No avail. Have also reset the printing system (losing all the other print queues in the process!) to no avail. Checked the printer setup on the iMacs that can print, and it is identical to that which I am attempting to install. Have I missed something? Anyone with any clues, please?

Hi there,
If you have your HP printer queue configured exactly the same as other Mac's that are working fine, and with all the steps you have taken thus far, then I can only suggest that you either have a network issue or something blocking the path.
So first thing is to check that you are set to the same subnet as the other Mac's. This can be confirmed via the Network Utility under the Info pane. You may have to change the drop menu from Ethernet (en0) to Airport (en1) depending on what you use. Typically the first three sets of numbers of your IP address is your subnet, while the last number is your network address. So, based on the printers address of 192.168.1.100, your Mac should have a subnet of 192.168.1 and a network address other than 100.
If the IP address for your Mac is set to the same subnet as the HP then while Network Utility is still open, select the Ping tab, enter the IP address of 192.168.1.100, set the number of Pings to 4 and press the Ping button. You should get a response from the printer.
If you do get a response then it is safe to assume that the network setup on your Mac is okay. At this stage I would check that your Firewall is disabled (located in System Preferences > Security).
If the firewall is not enabled then my last suggestion is to create another printer queue to the HP, this time selecting IP > LPD for the protocol. Since HP wrote Socket then it is odd that it would not be working, but a network host busy would indicate that the Mac cannot either communicate with the IP address or the Port of the selected IP address. By changing the protocol from HP Socket to LPD you are basically setting the Mac to connect on port 515 instead of 9100.
Note that if the other Mac's show the print queue URL as "socket://192.168.1.100/" then they are using HP Jetdirect also so it would make no sense that your connection to the same port would fail. But it can't hurt trying an alternate protocol when you have tried everything else...
HTH and reply if needed.
Pahu

"Server Busy" Error in Windows 8.1

Since yesterday, I have been unable to use Dreamweaver due to a "Server Busy" error coming up when I start the program. I have installed the available update through CC and am still etting the error, and all documentation on said error is for earlier versions of Dreamweaver and Windows.
I am unable to use the program and need a resolution to this as quickly as possible. Any help would be appreciated.
Thank you.

I believe I have found the solution. I uninstalled Norton Anti-Virus (after it said to have failed the latest update) and now the error is gone.
Norton came pre-installed on my laptop, yet the two programs had no problem until last week.

FDM data target system load error

Hi,
I am trying to Load the data from FDM11.1.1.3 to Planning11.1.1.3
I am using Essbase Adapter ES11X-G4-E,I imported data from a csv file ,it is imported success,and Export file was also successfully created,
My question : after this I am getting the error message in another window Target system laod , Error:Invalid use of null
Can you please anybody tell me what is the reasons for getting this error ?
Regards,
SV

One of the values on the Hyperion Essbase Integration Setup tab of the adapter is currently empty. Perform the following
a) Right-Click on the Essbase adpater in the workbench and choose Configure
b) Click on the Hyperion Essbase Integration Setup tab
c)Click on the Load/Check button
d) Verifiy that the List1, List2, and List3 boxes are not empty. These must have values:
List1: 0 -Load
List2: opt1
List3: opt1

Exit CL_HRASR00_POBJ_WF_EXIT triggered exeception for event STATE_CHG and (target) status READY- ERROR EVENT_RAISED - Error updating the process object

Hi All
I have set up a simple custom HCM process and Form regarding Infotype TO CREATE AND CHANGE POSITION. I have checked the process and form consistency and it seems fine. Now when I run the process from HRASR_DT it generates a process number but it also gives an error workflow could not start.I get following error (SWIA log - Step history)
Executing flow work item - Transaction brackets of the workflow has been damaged
Exception occurred - Error when starting work item 000000007031
PROCESS_NODE - Error when processing node '0000000014' (ParForEach index 000000)
CREATE - Error when creating a component of type 'Step'
CREATE_WIM_HANDLE - Error when creating a work item
CREATE_VIA_WFM - Exit CL_HRASR00_POBJ_WF_EXIT triggered exeception for event CREATED and (target) status
EVENT_RAISED - Error updating the process object
Executing flow work item - Exit CL_HRASR00_POBJ_WF_EXIT triggered exeception for event STATE_CHG and (target) status READY->ERROR
EVENT_RAISED - Error updating the process object
Executing flow work item - Transaction brackets of the workflow has been damaged
Executing flow work item - Work item 000000007031: Object FLOWITEM method EXECUTE cannot be executed
Executing flow work item - Error when processing node '0000000014' (ParForEach index 000000)
Points to be noted:
1) I have searched few SAP notes such as 1384961(Notes for 6.0.4) but our system is in higher level patch 6.0.5
2) WF-BATCH have SAP_NEW and SAP_ALL authorization.
Appreciate your valuable suggestions.
Thanks
Ragav

Hi Ragav
did you try to debug this? maybe something is missing in config of P&F?
Since you are on 605, the following note would be there in your system....use it to debug:
1422496 - Debugging background workflow tasks in HCM P&F
This will help you find the root cause.
regards,
modak

IP Printing Network Host Busy Error

I have a Dell color laser on our Novell LAN that I've always been able to print to from my PowerBook using the printer's IP address. Today I found a new PPD for that printer and installed it, now I can't print. I get this error:
"Network host 'nameofhost' is busy; will retry in 30 seconds . . ."
I can ping the printer and it's there. I can check the supply levels and it shows the correct levels. If I turn the printer off, I can no longer ping it or show the levels, so I know it's connecting correctly. I put the old PPD back in and I still get the same network busy error. I get the same error no matter which application I print from. Everything is set up the same as before, and it's setup the same as all the other printers I can print to. I can print to other printers on the network using the same method. I can print to this printer using my Windows PC and it works fine, so I know the printer/queue itself is not down.
If I had any hair, I would pull it out.
PowerBook G4 17 1.67GHz 1.5Gb RAM Mac OS X (10.4.6) Novell LAN printing via IP, Dell 5100cn Color Laser using correct PPD

Greg:
You gave me the hint that fixed it. I was setting up the new printer in SysPrefs using IPP protocol, but the printer was set up to accept LPD protocol. I changed it and now it works great. Thanks a bunch!!

"Server Busy" Error in Lightroom 4.1. 4.4 won't download/open properly

When I try to import new photos I get a "server busy" error in Lightroom 4.1. I have to click cancel/reset/cancel/reset for about a minute to get just one photo to import. Completely unacceptable if trying to import multiple photos. I downloaded 4.4 most recently in hopes of fixing this buy, but although it downloads, once downloading Lightroom, hoping when I re-installed it would automatically accept updates, but that didn't work. I still get server busy error. My Lightroom is completely useless right now. I'm working off a Windows system.

OMG... I'm such a nit-wit!! I switched the setting in my camera to try something and forgot to swith it back!
I've been digging through this for more that an hour and never bothered to check the file setting.
Thanks for the suggestion!

[Solved] archiso intermittent umount / target is busy error

Similar Messages

Maybe you are looking for