How & Where to create the Target Groups and Transport Targets for Business

Hi Experts,
I am Transporting the scenarios from Development 500 client XI system to Development 500 client PI7.1 system. I have taken the exports of Technical system and Business System from the DEV XI system and correspondingly have imported the same in the PI7.1 system. I can see the all the business system in the Business system SLD of the PI7.1 system. I would like to assign the Business System Groups and Transport Targets for every business system that I want to transport. How can I do that ? Whether this is to be done in DEV XI system or the DEV PI system? Can somebody elaborate the step by step method to create the Groups and Target system for the every Business system so that I can import the object of the Integration Directory sucessfully................................
Thanks & Regards
suk4023
Edited by: sukande on Aug 17, 2010 8:18 AM

Hi Supriya,
Thanks for the reply and good illustration............Still going further after defing the destination for transport in the source SLD Business system ( XI dev server) , then we should export it and subsequently import it in the SLD of the PI 7.1 ie the destination server. Then we should transport the objects of Integration Repository and Integration Directory to the new PI7.1 server. Is this the right way to proceed.? Hope that this will not give the error while importing the objects in Integration Directory. An typical which comes while importing the objects in the Integration Directory is as follows:-
*Import failed because of business system transfer of object Communication Component | PCM: Obligatory transport target for business system PCM not found in System Landscape Directory*
Pls clarify on this ......
Thanks & Regards
suk4023

Similar Messages

How can I get the second group and report totals in Matrix report?

Hi,
I have created a matrix report with 2 break Groups.
Iam getting columns totals for the first group, but not for the second group and the report totals.
How can I get the second group and report totals for each month?
Thanks.
Ram.

Hi Ram,
If you want a total at any group-level, go to the particular group in the data model, insert a summary column in the group, and select
Reset At > appropriate Group Name
For report level summaries, you must create the summary column outside of all groups.
Navneet.

How to Configuring Groups and Transport Targets ?

Hi Experts,
In my scenario i am having two XI Servers XI1(DEV) and XI2(QUA) each system is connected to different r/3 system.
If i transport object from XI1(DEV) to XI2(QUA) after defining Transport Target in XI1(DEV) as r/3 system connected to XI2(QUA) using file system would be fine (or) should i go for CTS?
Regards,
RajeshKumar.D

Hi,
You have to use Transpoprt method
Procedure:
1) Call Integration Builder screen on DEV Server with http://hostname:J2ee Port/rep
2) Call SLD (System Landscape Directory) Component from the Integration builder
Save all the .zip files on the Local Desktop
3) Select the Software Component & say Export that you want to Export from DEV
Server to Production server and which is going to use in the IR of XI
4) Also Select the Product of the above SWC and say Export
5) Select the Technical Systems (TS of XI & TS of the SAP R/3) and say Export
6) Select the Business System(s) & say Export; those are associated with above Exported
Technical systems.
In Production Server
1) Logon to the SLD of the Production Server.
2) Create a Technical System and Business system which points to the Production SAP R/3
3) Go to Administration TAB in the main page of SLD
4) Select the Import option to Import the SWC , PRD, TS,& BS which we Exported Earlier in DEV Server
5) Click on Browse and select the .zip files that is to Import into Production Server,
Which were stored on the local desktop at the time of DEV Server Export
And say Import Selected File Option
By this we exported and imported the SLD Objects
Now we have to create transport groups and transport targets in the Production server of SLD
Creation of Transport Groups
1) Select the Business systems GroupEdit Groups
2) Click on New Group and give the name of the group as DEV_group & select the
Corresponding Development serveru2019s integration Server
3) Similar way create another group for Production serveru2019s business system as
PRD_group and select the Production serveru2019s integration Server
Creation of transport targets
This is to Define which business systems in two different groups correspond to each other
1) Select each Business system in the SLD and select transport TAB---click on
Add/Change Target and select its corresponding target business system.
For Example:
If you select the business system of Production XI server means
In the target you have to select group as DEVGROUP and the business system of Development XI server.
Like this do the same for other business systems also
Ex:
BS_PRD_Integration Server----
BS_DEV_Inetration Server
How to create Transport Groups & transport Targets
http://help.sap.com/saphelp_nw04/helpdata/en/ef/a21e3e0987760be10000000a114084/content.htm
Regards
Seshagiri

How can we automate the Depreciation keys based on production for business

How can we automate the Depreciation keys based on production for business u2013 this is currently not an optimised process if we expect business to manually change the keyu2019s on a monthly basis.
The end user updates the table, transaction AO25, manually on month end after the production calculations are completed. The question is, is it possible when the PP is completed, that the system updates the Period Unit table for that period?
Thanks.
Regards,
PS PS

Hi,
I am new at this, so I need a explanation on how will this help me, and how do I get about doing this?
Thanks a lot.
Regards,
PS PS

Transport target group and routes setting for 2 system landscape

Hi!
I have 2 system landscape (DEV with 2 Clients, 100 CUST and 200 TEST and PRD with productvie client 100).
Currently I have the standard TMS configuration for 2 systems (with tranport layers/routes ZDEV and SAP) .
Now I have to set up my TMS settings client specific
(Development in DEV 100 and transport to the DE 200 TEST and PRD 100).
I have created tranport target group /B-DEV/ with both target goals:
DEV 200 and PRD 100.
What are the further settings for transport routes?
I assume, I have to delete the existing routes ZDEV and SAP?
what are the next steps? 
Thank you very much
regards

Ok, I have in DEV system:
Client 100 (Customizing)
Client 200 (Test) (it can be considered as replacement of QAS-system, because we only have 2 systems)
PRD system
Client 100 (Productive client)
So we would like to set up the transport management system client specific, in order to develop in DEV 100 to test in DEV 200 and to use the transports in PRD 100.
Thank you very for your help
regards

Configuring Groups and Transport Targets

Hi All,
I went through SAP help for this..i found this a little confusing.
Do i create groups DEV,QAS,PRD in XI development SLD. Or the groups should be there in the respective systems SLD.
In my case in Dev SLD only the development systems is visible in the SLD and in QAS the quality systems are visible in the SLD.
Do i need to show all the systems in each of the SLD?
Does the SAP help mean that we have only one SLD for the development, quality and production systems?
Regards,
Rahul

Hi Bhavesh,
I have different SLD. One each for DEV, QA, PRD.
i have installed CMS in development XI system
>>>>, in the QA SLD , you would need the Dev and the QA transprot Group and then create the trasnprot targets for the same.
Does it mean that in my QA SLD all the systems which are there in the Development system should be there?
Or shall i export the development SLD and then import it in the QA server.
Im on XI7.0 sp 9.
Regards,
Rahul
Message was edited by:
Rahul Jain

How can I change the default fill and stroke colors for new shapes?

As you can see in the following screen recording, after I change the stroke and fill color, all my subsequent rectangles are created respecting these new colors. But then when I delete all the rectangles, choose the rectangle shape tool once again, and start creating new rectangles, they start getting created with another color I had used some time ago (and I don't know how did it become the default color).
http://tinypic.com/r/64jrwp/6
So how can I change the defaults, so that the fill color is say #ddd, and the shape has no stroke at all?
Thanks.

When you have the shape tool selected you will see in the tool bar below - file edit etc a fill and stroke. This is where you can change the colours.
You can keep drawing your shapes like you did in the video but then select the rectangle and change the colour from this tool bar. The reason it changes will be because you changed the colours you were using (foreground / background) that display in the left side tool bar.

How do I get the Manged bean and Taskflow logic for Disable button in User details Modify page

Hi,
I have a requirement where I have to add to custom buttons like "Terminate" and "Reinstate" in the users detail page. Terminate is closely modeled with "Disable" button of user details page. Before I develop the custom beans and register the task flow for the custom button, I just want to understand the logic written in the managed bean for "Disable" button and understand what is there in its associated task flow. Am trying to get these details from OIM. Not sure where exactly I can get the code for this and customize as per my requirement.
Please suggest the exact location?
Raghu

Thanks for the information - I still was hoping that the article Mario mentioned above was accessible (perhaps just moved)? Somewhere on the BC system? Just so I can add it to my BC help folder - as well as even share it with clients who want to try things on their own (best to give them some help in that direction so they don't fumble through things).
I have the checkout form populating information, if they have purchased in the past it will populate their address - but I am also trying to get their "account page" to do the same (basically show them what their current information in the system is - then allow them to update whatever might be wrong or need changes). We have a login page, for people to sign up without having "bought" something - so the CRM won't have their billing/shipping info in the system yet. Trying to capture that without a purchasing being made.

In panorama, when I left click and drag to open a new tab group, unclicking doesn't create the new group and left clicking again only creates another group without finalizing the first one.

In Firefox 4.0 beta 11 (Windows 7 Professional) left clicking in panorama creats a new tab group but letting go doesn't finalise the group. I have XP mode on my computer and firefox b11 works fine in the virtual PC.
Edit:
This has continued into Firefox 4 RC2

Start Firefox in [[Safe Mode]] to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Where to store the PO: Terms and Condition file For printing it in PO

Hi All,
I want to add Terms and condition in my PO: Print output which is coming in PDF. I got the Profile name, which is --PO: Terms and Conditions filename. But i am not getting where i have to store the file on server and what i need to give the value for this profile. I had customized the PO_STANDARD_XSLFO template. Now only remaining thing is that i want to add the Terms and Conditions.
Should I hardcode it in the XSL-FO Template???
OR what value i should give to this profile option?
Regards
Ravi

Ravi
Check the thread
How to add Terms and Conditions in Standard PO XSL-FO template
Vicha

How do I create both a landscape and portrait display for my landing page?

I am using dreamweaver with phonegap to create an app.
I want to have two options for the landing page; one optimized for portrait, one optimized for landscape, that will change based on device orientation.
How do I do this?
Thank you

Have a look at this article http://voormedia.com/blog/2012/11/responsive-background-images-with-fixed-or-fluid-aspect- ratios

HT1918 How do I change the I-cloud and app password for this device to my husband's existing account?

Can I change the I-tune username and password for this I-pad to the username and password used on my husband's I-pad?

You can log out of the account that is used for purchasing content by tapping on the id in Settings > iTunes & App Store and you can then log back in with a different account - any content that was downloaded by the currently logged in account will remain tied to that account, so only that account will be able to download updates to its apps.
If you use iTunes Match, automatic downloads or redownload an account's past purchases then you may tie your iPad to that account for 90 days : http://support.apple.com/kb/HT4627 - so you won't be able to any of those three things on a different account until the 90 days have completed
For iCloud you can remove the existing account via Settings > iCloud > Delete Account

JavaCode to create IT Resource, Group and UserForm in OIM

Hi,
Is it possible to create the ITResource, Group and UserForm in OIM using java code(java apis).
Has anyone tried creating.
Regards,
Manju

ya , it is very simple. you can use the APIs for creating group, form etc,.
Use this link [APIs Guide|http://74.125.153.132/search?q=cache:Rkz-kX1n6sMJ:download-east.oracle.com/docs/cd/B32386_01/generic.902/b32144.pdf+guide+oracle+identity+manager+API&cd=1&hl=en&ct=clnk&gl=in]
[Create Group|http://otndnld.oracle.co.jp/document/products/id_mgmt/idm_904/doc_cd/javadocs/operations/Thor/API/Operations/tcGroupOperationsIntf.html]
Use Create Group API to create group and use tcFormDefinitionOperation and tcFormInstanceOperationsIntf APi to create form etc

About report groups and read programs for the object EC_PCA_SUM

Hi Friends,
Hope every one is doing well..!
I've an issue with the report groups and read programs for the object EC_PCA_SUM. As we know that the report groups and read programs available for this object in the application customizing are used to analys the archived data.
That is these programs comes into picture after the archiving operation.
For more information, you can visit the below web site:
[http://help.sap.com/erp2005_ehp_03/helpdata/EN/e4/69f353b75a11d1b5850000e82debc6/frameset.htm]
Now, my question is how would I check the code for these analysing programs available for this object. I can't see this in SE38.
Thanks to reply for this..
Full marks will be awarded.
Regards,
Shamim

Hi Lakshman,
Thanks for the reply.
Hi Deiter,
You're right.
Your provided transaction "GR55" helped me to find out the program name for a particular group. However, these are just Write and Painter reports.
But can you please let me know the functionality of these report groups ?? what are these used for ???
Do we have these programs for other archiving objects like CO_ITEM,CO_ML_BEL,MM_MATBEL,CO_ORDER,
PP_PLAN,PP_BKFLUSH ??
More points will be awarded.
Thanks a lot.
Regards,
Shamim
Edited by: S H A M I M on Sep 19, 2008 3:19 PM

Target groups and marketting compaigns

Hello all,
I am seeking for information about target groups and campaigns,
Where target group ID and compaign ID are stored?
Where can I find function modules that returns all bp's belongs to target group, and all target groups belongs to campaing?
All help wil be appriciated,
Rika

Hi Rika,
You will find campaign detials in table CGPL_TASK. Use function module CRM_MKTTG_TG_READ to get all bp's belong to target group.
Thanks
Swagatika

How & Where to create the Target Groups and Transport Targets for Business

Similar Messages

Maybe you are looking for