[SOLVED] Bumblebee/bbswitch Not Disabling Nvidia Card
Hello all. I've been able to resolve a wide variety of problems by searching through the posts here, but it seems I've come up empty on this one.
I'm running Arch on a Sager NP5160 (Clevo W150HN), i7-2630 QM, 8 GB RAM, running Optimus with an Nvidia GT 540M Optimus setup.
I've had Bumblebee and bbswitch running fine in the past, but recently I needed to reinstall Arch (my own fault).
I installed bumblebee and bbswitch again, as described on the wiki.
However, once everything is installed and configured, bbswitch is still unable to deactivate my Nvidia card.
I'm using the proprietary Nvidia driver.
I have verified that bumblebee.conf has the driver set to Nvidia (not nouveau), and uses bbswitch.
I have also tried blacklisting both nouveau and nvidia, as well as adding bbswitch to the modules section of my mkinitcpio.conf file (and regenerating the initramfs).
A curious point that I have noted is that the Nvidia card is disabled during boot, and up until I login.
Once my information loads, the Nvidia card is activated and I cannot deactivate it, even manually.
Here is the dmesg output when I run glxspheres64 using bumblebee:
[ 777.827743] [drm] Module unloaded
[ 777.829410] bbswitch: disabling discrete graphics
[ 777.829423] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140926/nsarguments-95)
[ 777.842135] pci 0000:01:00.0: Refused to change power state, currently in D0
[ 778.625647] nvidia 0000:01:00.0: enabling device (0006 -> 0007)
[ 778.625799] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=none,decodes=none:owns=none
[ 778.626884] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 1
[ 778.626906] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 346.35 Sat Jan 10 21:27:15 PST 2015
[ 778.629748] nvidia 0000:01:00.0: irq 38 for MSI/MSI-X
[ 778.635579] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140926/nsarguments-95)
[ 778.635666] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140926/nsarguments-95)
[ 778.635703] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140926/nsarguments-95)
[ 778.635734] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140926/nsarguments-95)
[ 778.635762] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140926/nsarguments-95)
[ 778.635790] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140926/nsarguments-95)
[ 778.636064] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140926/nsarguments-95)
[ 778.636096] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140926/nsarguments-95)
[ 782.694911] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140926/nsarguments-95)
Part of my systemd journal from a recent boot:
Feb 04 15:26:04 gondolin acpid[322]: client connected from 6944[0:997]
Feb 04 15:26:04 gondolin acpid[322]: 1 client rule loaded
Feb 04 15:26:05 gondolin bumblebeed[320]: [ 368.404917] [WARN][XORG] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
Feb 04 15:26:05 gondolin bumblebeed[320]: [ 368.404963] [WARN][XORG] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
Feb 04 15:26:05 gondolin bumblebeed[320]: [ 368.404979] [ERROR][XORG] (EE) systemd-logind: failed to get session: PID 6944 does not belong to any known session
Feb 04 15:26:05 gondolin bumblebeed[320]: [ 368.404989] [ERROR][XORG] (EE) /dev/dri/card0: failed to set DRM interface version 1.4: Permission denied
Feb 04 15:26:05 gondolin bumblebeed[320]: [ 368.405031] [WARN][XORG] (WW) NVIDIA(0): Unable to get display device for DPI computation.
Feb 04 15:26:05 gondolin bumblebeed[320]: [ 368.405056] [ERROR][XORG] (EE) /dev/dri/card0: failed to set DRM interface version 1.4: Permission denied
Feb 04 15:26:08 gondolin logger[6979]: ACPI group/action undefined: thermal_zone / LNXTHERM:00
Feb 04 15:26:12 gondolin kernel: [drm] Module unloaded
Feb 04 15:26:12 gondolin kernel: bbswitch: disabling discrete graphics
Feb 04 15:26:12 gondolin kernel: ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140926/nsarguments-95)
Feb 04 15:26:12 gondolin kernel: pci 0000:01:00.0: Refused to change power state, currently in D0
Feb 04 15:26:12 gondolin bumblebeed[320]: [ 375.273427] [ERROR][XORG] (EE) Server terminated successfully (0). Closing log file.
Feb 04 15:26:12 gondolin acpid[322]: client 6944[0:997] has disconnected
Feb 04 15:26:12 gondolin acpid[322]: client 6944[0:997] has disconnected
Feb 04 15:26:12 gondolin kernel: nvidia 0000:01:00.0: enabling device (0006 -> 0007)
Feb 04 15:26:12 gondolin kernel: vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=none,decodes=none:owns=none
Feb 04 15:26:12 gondolin kernel: [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 1
Feb 04 15:26:12 gondolin kernel: NVRM: loading NVIDIA UNIX x86_64 Kernel Module 346.35 Sat Jan 10 21:27:15 PST 2015
Feb 04 15:26:12 gondolin kernel: nvidia 0000:01:00.0: irq 38 for MSI/MSI-X
Feb 04 15:26:12 gondolin kernel: ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140926/nsarguments-95)
Feb 04 15:26:12 gondolin kernel: ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140926/nsarguments-95)
Feb 04 15:26:12 gondolin kernel: ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140926/nsarguments-95)
Feb 04 15:26:12 gondolin kernel: ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140926/nsarguments-95)
Feb 04 15:26:12 gondolin kernel: ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140926/nsarguments-95)
Feb 04 15:26:12 gondolin kernel: ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140926/nsarguments-95)
Feb 04 15:26:12 gondolin kernel: ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140926/nsarguments-95)
Feb 04 15:26:12 gondolin kernel: ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140926/nsarguments-95)
Feb 04 15:26:12 gondolin logger[6997]: ACPI group/action undefined: PNP0C14:00 / 000000d0
Finally, the Xorg.8.log:
X.Org X Server 1.16.3
Release Date: 2014-12-20
[ 366.573] X Protocol Version 11, Revision 0
[ 366.573] Build Operating System: Linux 3.18.1-1-ARCH x86_64
[ 366.573] Current Operating System: Linux gondolin 3.18.5-1-ARCH #1 SMP PREEMPT Fri Jan 30 07:31:50 CET 2015 x86_64
[ 366.573] Kernel command line: initrd=\initramfs-linux.img root=/dev/sda3 rw
[ 366.573] Build Date: 29 December 2014 01:09:58PM
[ 366.573]
[ 366.573] Current version of pixman: 0.32.6
[ 366.573] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 366.573] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 366.573] (==) Log file: "/var/log/Xorg.8.log", Time: Wed Feb 4 15:26:03 2015
[ 366.573] (++) Using config file: "/etc/bumblebee/xorg.conf.nvidia"
[ 366.573] (++) Using config directory: "/etc/bumblebee/xorg.conf.d"
[ 366.573] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 366.574] (==) ServerLayout "Layout0"
[ 366.574] (**) |-->Screen "Default Screen" (0)
[ 366.574] (**) | |-->Monitor "<default monitor>"
[ 366.574] (**) | |-->Device "DiscreteNvidia"
[ 366.574] (==) No monitor specified for screen "Default Screen".
Using a default monitor configuration.
[ 366.574] (**) Option "AutoAddDevices" "false"
[ 366.574] (**) Option "AutoAddGPU" "false"
[ 366.574] (**) Not automatically adding devices
[ 366.574] (==) Automatically enabling devices
[ 366.574] (**) Not automatically adding GPU devices
[ 366.574] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 366.574] Entry deleted from font path.
[ 366.574] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 366.574] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 366.574] Entry deleted from font path.
[ 366.574] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 366.574] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/
[ 366.574] (++) ModulePath set to "/usr/lib/nvidia/xorg/,/usr/lib/xorg/modules"
[ 366.575] (==) |-->Input Device "<default pointer>"
[ 366.575] (==) |-->Input Device "<default keyboard>"
[ 366.575] (==) The core pointer device wasn't specified explicitly in the layout.
Using the default mouse configuration.
[ 366.575] (==) The core keyboard device wasn't specified explicitly in the layout.
Using the default keyboard configuration.
[ 366.575] (II) Loader magic: 0x818d80
[ 366.575] (II) Module ABI versions:
[ 366.575] X.Org ANSI C Emulation: 0.4
[ 366.575] X.Org Video Driver: 18.0
[ 366.575] X.Org XInput driver : 21.0
[ 366.575] X.Org Server Extension : 8.0
[ 366.577] (EE) systemd-logind: failed to get session: PID 6944 does not belong to any known session
[ 366.578] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 366.578] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 366.578] (EE) /dev/dri/card0: failed to set DRM interface version 1.4: Permission denied
[ 366.581] (--) PCI:*(0:1:0:0) 10de:0df4:1558:5140 rev 161, Mem @ 0xf0000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00005000/128
[ 366.581] (II) Open ACPI successful (/var/run/acpid.socket)
[ 366.581] (II) LoadModule: "glx"
[ 366.581] (II) Loading /usr/lib/nvidia/xorg/modules/extensions/libglx.so
[ 366.599] (II) Module glx: vendor="NVIDIA Corporation"
[ 366.599] compiled for 4.0.2, module version = 1.0.0
[ 366.599] Module class: X.Org Server Extension
[ 366.599] (II) NVIDIA GLX Module 346.35 Sat Jan 10 20:53:39 PST 2015
[ 366.599] (II) LoadModule: "nvidia"
[ 366.599] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 366.600] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 366.600] compiled for 4.0.2, module version = 1.0.0
[ 366.600] Module class: X.Org Video Driver
[ 366.600] (II) LoadModule: "mouse"
[ 366.600] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
[ 366.600] (II) Module mouse: vendor="X.Org Foundation"
[ 366.600] compiled for 1.16.0, module version = 1.9.1
[ 366.600] Module class: X.Org XInput Driver
[ 366.600] ABI class: X.Org XInput driver, version 21.0
[ 366.600] (II) LoadModule: "kbd"
[ 366.601] (WW) Warning, couldn't open module kbd
[ 366.601] (II) UnloadModule: "kbd"
[ 366.601] (II) Unloading kbd
[ 366.601] (EE) Failed to load module "kbd" (module does not exist, 0)
[ 366.601] (II) NVIDIA dlloader X Driver 346.35 Sat Jan 10 20:32:18 PST 2015
[ 366.601] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 366.601] (--) using VT number 7
[ 366.601] (II) Loading sub module "fb"
[ 366.601] (II) LoadModule: "fb"
[ 366.601] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 366.601] (II) Module fb: vendor="X.Org Foundation"
[ 366.601] compiled for 1.16.3, module version = 1.0.0
[ 366.601] ABI class: X.Org ANSI C Emulation, version 0.4
[ 366.601] (II) Loading sub module "wfb"
[ 366.601] (II) LoadModule: "wfb"
[ 366.601] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 366.602] (II) Module wfb: vendor="X.Org Foundation"
[ 366.602] compiled for 1.16.3, module version = 1.0.0
[ 366.602] ABI class: X.Org ANSI C Emulation, version 0.4
[ 366.602] (II) Loading sub module "ramdac"
[ 366.602] (II) LoadModule: "ramdac"
[ 366.602] (II) Module "ramdac" already built-in
[ 366.615] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen" for depth/fbbpp 24/32
[ 366.615] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 366.615] (==) NVIDIA(0): RGB weight 888
[ 366.615] (==) NVIDIA(0): Default visual is TrueColor
[ 366.616] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 366.616] (**) NVIDIA(0): Option "NoLogo" "true"
[ 366.616] (**) NVIDIA(0): Option "ProbeAllGpus" "false"
[ 366.616] (**) NVIDIA(0): Option "UseEDID" "false"
[ 366.616] (**) NVIDIA(0): Option "UseDisplayDevice" "none"
[ 366.616] (**) NVIDIA(0): Enabling 2D acceleration
[ 366.616] (**) NVIDIA(0): Ignoring EDIDs
[ 366.616] (**) NVIDIA(0): Option "UseDisplayDevice" set to "none"; enabling NoScanout
[ 366.616] (**) NVIDIA(0): mode
[ 366.964] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
[ 366.965] (II) NVIDIA(0): NVIDIA GPU GeForce GT 540M (GF108) at PCI:1:0:0 (GPU-0)
[ 366.965] (--) NVIDIA(0): Memory: 1048576 kBytes
[ 366.965] (--) NVIDIA(0): VideoBIOS: 70.08.53.00.05
[ 366.965] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 366.965] (--) NVIDIA(0): Valid display device(s) on GeForce GT 540M at PCI:1:0:0
[ 366.965] (--) NVIDIA(0): none
[ 366.966] (II) NVIDIA(0): Validated MetaModes:
[ 366.966] (II) NVIDIA(0): "NULL"
[ 366.966] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
[ 366.966] (WW) NVIDIA(0): Unable to get display device for DPI computation.
[ 366.966] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[ 366.966] (--) Depth 24 pixmap format is 32 bpp
[ 366.966] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[ 366.966] (II) NVIDIA: access.
[ 367.798] (II) NVIDIA(0): Setting mode "NULL"
[ 367.841] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 367.842] (==) NVIDIA(0): Backing store enabled
[ 367.842] (==) NVIDIA(0): Silken mouse enabled
[ 367.842] (==) NVIDIA(0): DPMS enabled
[ 367.842] (II) Loading sub module "dri2"
[ 367.842] (II) LoadModule: "dri2"
[ 367.842] (II) Module "dri2" already built-in
[ 367.842] (II) NVIDIA(0): [DRI2] Setup complete
[ 367.842] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 367.842] (--) RandR disabled
[ 367.852] (II) Initializing extension GLX
[ 367.928] (II) Using input driver 'mouse' for '<default pointer>'
[ 367.928] (**) Option "CorePointer" "on"
[ 367.928] (**) <default pointer>: always reports core events
[ 367.928] (WW) <default pointer>: No Device specified, looking for one...
[ 368.010] (II) <default pointer>: Setting Device option to "/dev/input/mice"
[ 368.010] (--) <default pointer>: Device: "/dev/input/mice"
[ 368.010] (==) <default pointer>: Protocol: "Auto"
[ 368.010] (**) <default pointer>: always reports core events
[ 368.010] (**) Option "Device" "/dev/input/mice"
[ 368.090] (==) <default pointer>: Emulate3Buttons, Emulate3Timeout: 50
[ 368.090] (**) <default pointer>: ZAxisMapping: buttons 4 and 5
[ 368.090] (**) <default pointer>: Buttons: 9
[ 368.090] (II) XINPUT: Adding extended input device "<default pointer>" (type: MOUSE, id 6)
[ 368.090] (**) <default pointer>: (accel) keeping acceleration scheme 1
[ 368.090] (**) <default pointer>: (accel) acceleration profile 0
[ 368.090] (**) <default pointer>: (accel) acceleration factor: 2.000
[ 368.090] (**) <default pointer>: (accel) acceleration threshold: 4
[ 368.090] (II) <default pointer>: Setting mouse protocol to "ExplorerPS/2"
[ 368.384] (II) <default pointer>: ps2EnableDataReporting: succeeded
[ 368.384] (II) LoadModule: "kbd"
[ 368.385] (WW) Warning, couldn't open module kbd
[ 368.385] (II) UnloadModule: "kbd"
[ 368.385] (II) Unloading kbd
[ 368.385] (EE) Failed to load module "kbd" (module does not exist, 0)
[ 368.385] (EE) No input driver matching `kbd'
[ 368.388] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 368.388] (II) AutoAddDevices is off - not adding device.
[ 368.388] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[ 368.388] (II) AutoAddDevices is off - not adding device.
[ 368.389] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 368.389] (II) AutoAddDevices is off - not adding device.
[ 368.389] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 368.389] (II) AutoAddDevices is off - not adding device.
[ 368.390] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 368.390] (II) AutoAddDevices is off - not adding device.
[ 368.390] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 368.390] (II) AutoAddDevices is off - not adding device.
[ 368.391] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 368.391] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 368.391] (EE) /dev/dri/card0: failed to set DRM interface version 1.4: Permission denied
[ 368.391] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event9)
[ 368.392] (II) AutoAddDevices is off - not adding device.
[ 368.392] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event10)
[ 368.392] (II) AutoAddDevices is off - not adding device.
[ 368.392] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event11)
[ 368.392] (II) AutoAddDevices is off - not adding device.
[ 368.393] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event12)
[ 368.393] (II) AutoAddDevices is off - not adding device.
[ 368.394] (II) config/udev: Adding input device Areson USB Device (/dev/input/event7)
[ 368.394] (II) AutoAddDevices is off - not adding device.
[ 368.394] (II) config/udev: Adding input device Areson USB Device (/dev/input/mouse0)
[ 368.394] (II) AutoAddDevices is off - not adding device.
[ 368.395] (II) config/udev: Adding input device BisonCam, NB Pro (/dev/input/event13)
[ 368.395] (II) AutoAddDevices is off - not adding device.
[ 368.395] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[ 368.395] (II) AutoAddDevices is off - not adding device.
[ 368.396] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event14)
[ 368.396] (II) AutoAddDevices is off - not adding device.
[ 368.396] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[ 368.396] (II) AutoAddDevices is off - not adding device.
[ 368.397] (II) config/udev: Adding input device PC Speaker (/dev/input/event8)
[ 368.397] (II) AutoAddDevices is off - not adding device.
[ 375.131] (II) UnloadModule: "mouse"
[ 375.153] (II) NVIDIA(GPU-0): Deleting GPU-0
[ 375.154] (EE) Server terminated successfully (0). Closing log file.
I am unsure what else to try.
If there is any other information needed that I have neglected to provide, I will do my best to post it right away.
Thanks in advance for your assistance.
Last edited by StateOfBlind (2015-03-08 13:46:49)
Sorry to bump this, but I've found some more information.
Unfortunately, I'm not sure what to do with it yet.
I've uninstalled and reinstalled the relevant packages outlined in the Bumblebee wiki.
When my laptop boots, the Nvidia card is disabled up until I log in, at which point it appears to be perpetually enabled, unless the Optimus indicator lights are showing incorrectly.
This is the log output I receive when I run optimus glxspheres64:
Mar 02 10:15:03 gondolin kernel: ------------[ cut here ]------------
Mar 02 10:15:03 gondolin kernel: WARNING: CPU: 1 PID: 16254 at fs/proc/generic.c:315 proc_register+0xc8/0x150()
Mar 02 10:15:03 gondolin kernel: proc_dir_entry 'driver/nvidia' already registered
Mar 02 10:15:03 gondolin kernel: Modules linked in: nvidia(PO+) ctr ccm hid_generic usbhid hid bbswitch(O) joydev mousedev uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core v4l2_common videodev media snd_hda_codec_hdmi iTCO_wdt i
Mar 02 10:15:03 gondolin kernel: intel_gtt i2c_algo_bit libata drm_kms_helper xhci_pci ehci_pci scsi_mod drm xhci_hcd atkbd ehci_hcd libps2 sdhci_pci sdhci led_class usbcore mmc_core usb_common i2c_core i8042 serio video button [last unl
Mar 02 10:15:03 gondolin kernel: CPU: 1 PID: 16254 Comm: modprobe Tainted: P W O 3.18.6-1-ARCH #1
Mar 02 10:15:03 gondolin kernel: Hardware name: CLEVO CO. W150HNM/W170HN /W150HNM/W170HN , BIOS HR_2.1.0.128 X64 04/01
Mar 02 10:15:03 gondolin kernel: 0000000000000000 00000000970ffdf0 ffff88021233fb08 ffffffff8154fb74
Mar 02 10:15:03 gondolin kernel: 0000000000000000 ffff88021233fb60 ffff88021233fb48 ffffffff81072c41
Mar 02 10:15:03 gondolin kernel: ffffffff81b11838 ffff880208fdab80 ffff88022e2b15f3 ffff88022e2b1580
Mar 02 10:15:03 gondolin kernel: Call Trace:
Mar 02 10:15:03 gondolin kernel: [<ffffffff8154fb74>] dump_stack+0x4e/0x71
Mar 02 10:15:03 gondolin kernel: [<ffffffff81072c41>] warn_slowpath_common+0x81/0xa0
Mar 02 10:15:03 gondolin kernel: [<ffffffff81072cb5>] warn_slowpath_fmt+0x55/0x70
Mar 02 10:15:03 gondolin kernel: [<ffffffff8123aed4>] ? proc_alloc_inum+0x54/0xe0
Mar 02 10:15:03 gondolin kernel: [<ffffffff8123b028>] proc_register+0xc8/0x150
Mar 02 10:15:03 gondolin kernel: [<ffffffff8123b1b2>] proc_mkdir_data+0x52/0x80
Mar 02 10:15:03 gondolin kernel: [<ffffffff8123b1f3>] proc_mkdir_mode+0x13/0x20
Mar 02 10:15:03 gondolin kernel: [<ffffffffa0c88ffc>] nv_register_procfs+0x5c/0x210 [nvidia]
Mar 02 10:15:03 gondolin kernel: [<ffffffffa178c2e2>] nvidia_init_module+0x2e2/0x7c2 [nvidia]
Mar 02 10:15:03 gondolin kernel: [<ffffffffa178c7d7>] ? nv_drm_init+0x15/0x15 [nvidia]
Mar 02 10:15:03 gondolin kernel: [<ffffffffa178c85d>] nvidia_frontend_init_module+0x86/0x829 [nvidia]
Mar 02 10:15:03 gondolin kernel: [<ffffffff81002148>] do_one_initcall+0xd8/0x210
Mar 02 10:15:03 gondolin kernel: [<ffffffff81196c52>] ? __vunmap+0xa2/0x100
Mar 02 10:15:03 gondolin kernel: [<ffffffff810f6bd6>] load_module+0x1ea6/0x27d0
Mar 02 10:15:03 gondolin kernel: [<ffffffff810f2fb0>] ? store_uevent+0x70/0x70
Mar 02 10:15:03 gondolin kernel: [<ffffffff810f75cd>] SyS_init_module+0xcd/0x120
Mar 02 10:15:03 gondolin kernel: [<ffffffff815556e9>] system_call_fastpath+0x12/0x17
Mar 02 10:15:03 gondolin kernel: ---[ end trace 1a8b41591c71f998 ]---
Mar 02 10:15:03 gondolin kernel: NVRM: This is a 64-bit BAR mapped above 4GB by the system
NVRM: BIOS or the Linux kernel, but the PCI bridge
NVRM: immediately upstream of this GPU does not define
NVRM: a matching prefetchable memory window.
Mar 02 10:15:03 gondolin kernel: NVRM: This may be due to a known Linux kernel bug. Please
NVRM: see the README section on 64-bit BARs for additional
NVRM: information.
Mar 02 10:15:03 gondolin kernel: nvidia: probe of 0000:01:00.0 failed with error -1
Mar 02 10:15:03 gondolin kernel: Error: Driver 'nvlink' is already registered, aborting...
Mar 02 10:15:03 gondolin kernel: NVRM: The NVIDIA probe routine failed for 1 device(s).
Mar 02 10:15:03 gondolin kernel: NVRM: None of the NVIDIA graphics adapters were initialized!
Mar 02 10:15:03 gondolin kernel: [drm] Module unloaded
Mar 02 10:15:03 gondolin kernel: NVRM: NVIDIA init module failed!
Mar 02 10:15:03 gondolin systemd-udevd[15488]: Failed to apply ACL on /dev/dri/card1: No such file or directory
Mar 02 10:15:03 gondolin systemd-udevd[15488]: Failed to apply ACL on /dev/dri/card1: No such file or directory
Mar 02 10:15:04 gondolin systemd-udevd[15488]: Failed to apply ACL on /dev/dri/card1: No such file or directory
Mar 02 10:15:04 gondolin systemd-udevd[15488]: Failed to apply ACL on /dev/dri/card1: No such file or directory
Any thoughts?
Similar Messages
-
Disable Nvidia Card Using Bumblebee
Hi,
I had Nvidia Optimus disabled through BIOS but it seems their is a neat way to disable Nvidia NVS 4200 in Arch using Bumblebee which is very helpful as I am still setting up my Arch system and use windows and nvidia card. Nvidia card adds another 5 degrees of heat to my system and I would like to disable it when using Arch.
I installed bumblebee and bumblebee-thinkpad_w520_t520_t420 from AUR. I have added bumblebee group. bumblebee and dkms is in daemon category of rc.conf and nvidia and acpi_call is in module section. I get following error when loading nvidia module.
modprobe nvidia
FATAL: Error inserting nvidia (/lib/modules/3.1.8-1-ARCH/kernel/drivers/video/nvidia.ko): No such device
This is what i have in end of dmesg
[ 265.106489] nvidia: module license 'NVIDIA' taints kernel.
[ 265.106492] Disabling lock debugging due to kernel taint
[ 265.149082] NVRM: No NVIDIA graphics adapter found!
[ 1248.491642] NVRM: No NVIDIA graphics adapter found!
Thanks.
Last edited by donniezazen (2012-01-08 20:47:05)Sorry, Nvidia card works but now bumblebee fails.
-
Windows 7 Not Detecting Nvidia Card. Gt70 670MX GPU.
So I downgraded from windows 8 to windows 7 and have recently discovered my computer is using the Intel HD 4000 instead of the correct Nvidia 670MX. When I disable the Intel Hd the system restarts and displays stuff but the nvidia program says it can not detect an nvidia gpu. When I re enable, the nvidia driver detects the gpu but does not use it (directx diag shows the intel hd 4000). Any help would be greatly appreciated because I would hate to have to reformat back to windows 8.
Dxdiag will not use the NVidia card. Ignore it, as it's stupid to rely on it for anything.
You can't use the NVidia card 100% of the time. You need to use the Intel HD4000 when you're not gaming, as that's what it's meant for with Optimus.
Sometimes you need to make sure that it is switching to the NVidia card when you need it for a game or for whatever it is you're doing that you need it. This usually involves making a custom profile within the NVidia control panel. I have not played a game yet where I did NOT have to add it. I'd add it anyway, just to be sure that it's working correctly. Once you add the game, and tell it to use the NVidia high performance adapter (instead of the Intel integrated adapter), it should work just fine and hopefully increase your FPS. -
[solved] bumblebee - can't use NVIDIA
hi
I can't find anything helpfull about this error.
johannes@arch-laptop ~ % optirun steam
[ 1074.176912] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) systemd-logind: failed to get session: PID 753 does not belong to any known session
[ 1074.176969] [ERROR]Aborting because fallback start is disabled.
1 johannes@arch-laptop ~ % cat /var/log/Xorg.8.log :(
[ 25.790]
X.Org X Server 1.16.0
Release Date: 2014-07-16
[ 25.790] X Protocol Version 11, Revision 0
[ 25.790] Build Operating System: Linux 3.15.5-2-ARCH x86_64
[ 25.790] Current Operating System: Linux arch-laptop 3.16.1-1-ARCH #1 SMP PREEMPT Thu Aug 14 07:40:19 CEST 2014 x86_64
[ 25.790] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=b9d0c62c-be3e-43e3-ae89-1908af570819 rw quiet
[ 25.790] Build Date: 31 July 2014 11:53:19AM
[ 25.790]
[ 25.790] Current version of pixman: 0.32.6
[ 25.790] Before reporting problems, check [url]http://wiki.x.org[/url]
to make sure that you have the latest version.
[ 25.790] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 25.791] (==) Log file: "/var/log/Xorg.8.log", Time: Tue Aug 19 10:09:35 2014
[ 25.791] (++) Using config file: "/etc/bumblebee/xorg.conf.nvidia"
[ 25.791] (++) Using config directory: "/etc/bumblebee/xorg.conf.d"
[ 25.791] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 25.791] (==) ServerLayout "Layout0"
[ 25.791] (==) No screen section available. Using defaults.
[ 25.791] (**) |-->Screen "Default Screen Section" (0)
[ 25.791] (**) | |-->Monitor "<default monitor>"
[ 25.791] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 25.791] (**) | |-->Device "DiscreteNvidia"
[ 25.791] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 25.791] (**) Option "AutoAddDevices" "false"
[ 25.791] (**) Option "AutoAddGPU" "false"
[ 25.791] (**) Not automatically adding devices
[ 25.791] (==) Automatically enabling devices
[ 25.791] (**) Not automatically adding GPU devices
[ 25.791] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 25.791] Entry deleted from font path.
[ 25.791] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 25.791] Entry deleted from font path.
[ 25.791] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 25.791] Entry deleted from font path.
[ 25.791] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 25.791] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 25.791] Entry deleted from font path.
[ 25.791] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 25.791] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/
[ 25.791] (++) ModulePath set to "/usr/lib/nvidia/xorg/,/usr/lib/xorg/modules"
[ 25.791] (==) |-->Input Device "<default pointer>"
[ 25.791] (==) |-->Input Device "<default keyboard>"
[ 25.791] (==) The core pointer device wasn't specified explicitly in the layout.
Using the default mouse configuration.
[ 25.791] (==) The core keyboard device wasn't specified explicitly in the layout.
Using the default keyboard configuration.
[ 25.791] (II) Loader magic: 0x818d80
[ 25.791] (II) Module ABI versions:
[ 25.791] X.Org ANSI C Emulation: 0.4
[ 25.791] X.Org Video Driver: 18.0
[ 25.791] X.Org XInput driver : 21.0
[ 25.791] X.Org Server Extension : 8.0
[ 25.792] (EE) systemd-logind: failed to get session: PID 753 does not belong to any known session
[ 25.792] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 25.792] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 25.792] (EE) /dev/dri/card0: failed to set DRM interface version 1.4: Permission denied
[ 25.793] (--) PCI:*(0:1:0:0) 10de:11e2:1558:3537 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 25.793] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 25.793] (II) LoadModule: "glx"
[ 25.793] (II) Loading /usr/lib/nvidia/xorg/modules/extensions/libglx.so
[ 25.879] (II) Module glx: vendor="NVIDIA Corporation"
[ 25.879] compiled for 4.0.2, module version = 1.0.0
[ 25.879] Module class: X.Org Server Extension
[ 25.880] (II) NVIDIA GLX Module 340.32 Tue Aug 5 20:32:43 PDT 2014
[ 25.880] (II) LoadModule: "nvidia"
[ 25.881] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 25.886] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 25.886] compiled for 4.0.2, module version = 1.0.0
[ 25.886] Module class: X.Org Video Driver
[ 25.887] (II) LoadModule: "mouse"
[ 25.887] (WW) Warning, couldn't open module mouse
[ 25.887] (II) UnloadModule: "mouse"
[ 25.887] (II) Unloading mouse
[ 25.887] (EE) Failed to load module "mouse" (module does not exist, 0)
[ 25.887] (II) LoadModule: "kbd"
[ 25.887] (WW) Warning, couldn't open module kbd
[ 25.887] (II) UnloadModule: "kbd"
[ 25.887] (II) Unloading kbd
[ 25.887] (EE) Failed to load module "kbd" (module does not exist, 0)
[ 25.887] (II) NVIDIA dlloader X Driver 340.32 Tue Aug 5 20:13:04 PDT 2014
[ 25.887] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 25.888] (--) using VT number 1
[ 25.888] (II) Loading sub module "fb"
[ 25.888] (II) LoadModule: "fb"
[ 25.888] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 25.889] (II) Module fb: vendor="X.Org Foundation"
[ 25.889] compiled for 1.16.0, module version = 1.0.0
[ 25.889] ABI class: X.Org ANSI C Emulation, version 0.4
[ 25.889] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 25.889] (II) Loading sub module "wfb"
[ 25.889] (II) LoadModule: "wfb"
[ 25.889] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 25.890] (II) Module wfb: vendor="X.Org Foundation"
[ 25.890] compiled for 1.16.0, module version = 1.0.0
[ 25.890] ABI class: X.Org ANSI C Emulation, version 0.4
[ 25.890] (II) Loading sub module "ramdac"
[ 25.890] (II) LoadModule: "ramdac"
[ 25.890] (II) Module "ramdac" already built-in
[ 25.892] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 25.892] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 25.892] (==) NVIDIA(0): RGB weight 888
[ 25.892] (==) NVIDIA(0): Default visual is TrueColor
[ 25.892] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 25.892] (**) NVIDIA(0): Option "NoLogo" "true"
[ 25.892] (**) NVIDIA(0): Option "ProbeAllGpus" "false"
[ 25.892] (**) NVIDIA(0): Option "UseEDID" "false"
[ 25.892] (**) NVIDIA(0): Option "UseDisplayDevice" "none"
[ 25.892] (**) NVIDIA(0): Enabling 2D acceleration
[ 25.892] (**) NVIDIA(0): Ignoring EDIDs
[ 25.892] (**) NVIDIA(0): Option "UseDisplayDevice" set to "none"; enabling NoScanout
[ 25.892] (**) NVIDIA(0): mode
[ 26.062] (EE) NVIDIA(GPU-0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please
[ 26.062] (EE) NVIDIA(GPU-0): check your system's kernel log for additional error
[ 26.062] (EE) NVIDIA(GPU-0): messages and refer to Chapter 8: Common Problems in the
[ 26.062] (EE) NVIDIA(GPU-0): README for additional information.
[ 26.062] (EE) NVIDIA(GPU-0): Failed to initialize the NVIDIA graphics device!
[ 26.062] (EE) NVIDIA(0): Failing initialization of X screen 0
[ 26.062] (II) UnloadModule: "nvidia"
[ 26.062] (II) UnloadSubModule: "wfb"
[ 26.062] (II) UnloadSubModule: "fb"
[ 26.062] (EE) Screen(s) found, but none have a usable configuration.
[ 26.062] (EE)
Fatal server error:
[ 26.062] (EE) no screens found(EE)
[ 26.062] (EE)
Please consult the The X.Org Foundation support
at [url]http://wiki.x.org[/url]
for help.
[ 26.062] (EE) Please also check the log file at "/var/log/Xorg.8.log" for additional information.
[ 26.062] (EE)
[ 26.062] (EE) Server terminated with error (1). Closing log file.
dmesg:
[ 21.892672] NVRM: RmInitAdapter failed! (0x24:0x28:1170)
[ 21.892678] NVRM: rm_init_adapter failed for device bearing minor number 0
[ 21.892694] NVRM: nvidia_frontend_open: minor 0, module->open() failed, error -5
[ 21.897046] NVRM: request_irq() failed (-22)
[ 21.897050] NVRM: nvidia_frontend_open: minor 0, module->open() failed, error -22
[ 21.900586] NVRM: request_irq() failed (-22)
[ 21.900590] NVRM: nvidia_frontend_open: minor 0, module->open() failed, error -22
[ 21.906486] NVRM: request_irq() failed (-22)
[ 21.906491] NVRM: nvidia_frontend_open: minor 0, module->open() failed, error -22
[ 21.910275] NVRM: request_irq() failed (-22)
[ 21.910279] NVRM: nvidia_frontend_open: minor 0, module->open() failed, error -22
[ 22.193946] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is off
[ 25.312453] bbswitch: enabling discrete graphics
[ 25.914870] vgaarb: this pci device is not a vga device
[ 25.916494] nvidia 0000:01:00.0: irq 51 for MSI/MSI-X
[ 25.918744] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[ 25.918793] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[ 25.918819] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[ 25.918851] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[ 25.918876] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[ 25.918900] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[ 25.918928] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[ 25.918953] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[ 25.964044] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[ 26.083073] NVRM: GPU at 0000:01:00.0 has fallen off the bus.
[ 26.085289] NVRM: RmInitAdapter failed! (0x25:0x28:1196)
[ 26.085296] NVRM: rm_init_adapter failed for device bearing minor number 0
[ 26.085312] NVRM: nvidia_frontend_open: minor 0, module->open() failed, error -5
[ 32.838914] bbswitch: enabling discrete graphics
[ 54.361747] bbswitch: enabling discrete graphics
[ 54.373589] nvidia 0000:01:00.0: Refused to change power state, currently in D3
[ 272.255328] [drm] Module unloaded
[ 292.733787] NVRM: This is a 64-bit BAR mapped above 4GB by the system
NVRM: BIOS or the Linux kernel, but the PCI bridge
NVRM: immediately upstream of this GPU does not define
NVRM: a matching prefetchable memory window.
[ 292.733790] NVRM: This may be due to a known Linux kernel bug. Please
NVRM: see the README section on 64-bit BARs for additional
NVRM: information.
[ 292.733793] nvidia: probe of 0000:01:00.0 failed with error -1
[ 292.734134] NVRM: The NVIDIA probe routine failed for 1 device(s).
[ 292.734135] NVRM: None of the NVIDIA graphics adapters were initialized!
[ 292.734137] [drm] Module unloaded
[ 292.734224] NVRM: NVIDIA init module failed!
[ 601.447155] bbswitch: enabling discrete graphics
[ 601.458443] pci 0000:01:00.0: Refused to change power state, currently in D3
[ 1074.830805] bbswitch: enabling discrete graphics
[ 1074.841537] pci 0000:01:00.0: Refused to change power state, currently in D3
edit: I think it has something to do with the new Xorg-server:
https://github.com/Bumblebee-Project/Bu … issues/600
Last edited by aligator (2014-08-20 17:15:19)johannes@arch-laptop ~ % systemctl status bumblebeed
● bumblebeed.service - Bumblebee C Daemon
Loaded: loaded (/usr/lib/systemd/system/bumblebeed.service; enabled)
Active: active (running) since Di 2014-08-19 12:12:40 CEST; 11min ago
Main PID: 290 (bumblebeed)
CGroup: /system.slice/bumblebeed.service
└─290 /usr/bin/bumblebeed
Aug 19 12:13:03 arch-laptop bumblebeed[290]: [ 26.738516] [ERROR][XORG] (EE) NVIDIA(0): Failing initialization of X screen 0
Aug 19 12:13:03 arch-laptop bumblebeed[290]: [ 26.738519] [ERROR][XORG] (EE) Screen(s) found, but none have a usable configuration.
Aug 19 12:13:03 arch-laptop bumblebeed[290]: [ 26.738521] [ERROR][XORG] (EE)
Aug 19 12:13:03 arch-laptop bumblebeed[290]: [ 26.738525] [ERROR][XORG] (EE) no screens found(EE)
Aug 19 12:13:03 arch-laptop bumblebeed[290]: [ 26.738528] [ERROR][XORG] (EE)
Aug 19 12:13:03 arch-laptop bumblebeed[290]: [ 26.738531] [ERROR][XORG] (EE) Please also check the log file at "/var/log/Xorg.8.log" for additional information.
Aug 19 12:13:03 arch-laptop bumblebeed[290]: [ 26.738533] [ERROR][XORG] (EE)
Aug 19 12:13:03 arch-laptop bumblebeed[290]: [ 26.738535] [ERROR][XORG] (EE) Server terminated with error (1). Closing log file.
Aug 19 12:13:03 arch-laptop bumblebeed[290]: [ 26.741900] [ERROR]X did not start properly
Aug 19 12:13:22 arch-laptop bumblebeed[290]: [ 45.367149] [ERROR]Could not enable discrete graphics card
1 johannes@arch-laptop ~ % sudo lspci -k | grep -A 2 -i "VGA" :(
[sudo] password for johannes:
00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06)
Subsystem: CLEVO/KAPOK Computer Device 3537
Kernel driver in use: i915
1 johannes@arch-laptop ~ % sudo lspci -k | grep -A 2 -i "NVIDIA" :(
01:00.0 3D controller: NVIDIA Corporation GK106M [GeForce GTX 765M] (rev ff)
Kernel driver in use: nvidia
Kernel modules: nouveau, nvidia
The strange thing is that sometimes it works great after reboot...
Last edited by aligator (2014-08-18 10:30:10) -
Heroes of the Storm with bumblebee doesn't use NVidia Card.
Hi,
So I have bumblebee installed it works perfectly.
Problem:
executing "optirun wine HeroesSwitcher.exe" it doesn't use the Nvidia GPu.
It's probably caused by the launcher is starting the game in a separate process and exiting right after, witch in turn termintes it's parent process "optirun".
Is there any way that I can like run all the wine programs with bumblebee. or a way to execute the game with the Nvidia GPU.
Sorry for the English.
Regards,
Last edited by hardrevo (2015-03-31 02:41:24)Is there any insight here? I can't seem to get my brand new work y70 to use the NVidia graphics card for any external displays! What the heck is going on!? And, moreso, why can't even the crummy Intel onboard graphics push 2560 x 1600 via either HDMI or USB (through a replicator)? I've had a 30" monitor running 2560 x 1600 for 5 years. This is a brand new laptop and can't push out high res?! It's crazy to me!! EDIT: I presently have the Intel display adapter disabled in the device manager. I have video on the laptop display but I can no longer get ANY external displays to work. Which means, to me, it would seem that the NVidia GPU is 100% relegated to the laptop display, ONLY.
-
Gt70 2pe disable nvidia card unlocked
Need an unlocked BIOS.
My GTX 880M video card is bad.
I need to be able to turn it off so that my OS can only see the Intel HD 4600 video card.
Let me know when you get a BIOS ready for me.
How much is donation?http://i933.photobucket.com/albums/ad171/bash64000/Capture3_zpssdmjjfzn.png
-
[solved] Module bbswitch does not load, cannot disable nvidia
Hey!
According to the title I'm unable to load the bbswitch module on load with it's given parameters. I do it the way suggest in the Arch Wiki.
I'm using linux-ck
local/linux-ck-corex 3.5.6-1 (ck-corex)
local/linux-ck-corex-headers 3.5.6-1 (ck-corex)
local/nvidia-ck-corex 304.51-2 (ck-corex)
(I heard theat graysky said that there are no problems)
My /etc/modprobe.d/bbswitch.conf looks like
options bbswitch load_state=0 unload_state=0
dmesg|tail -10 outputs:
[ 121.351475] bbswitch: version 0.4.2
[ 121.351486] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
[ 121.351497] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG1.GFX0
[ 121.351647] bbswitch: detected an Optimus _DSM function
[ 121.351656] bbswitch: device 0000:01:00.0 is in use by driver 'nvidia', refusing OFF
[ 121.351659] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on
[ 135.236590] bbswitch: disabling discrete graphics
[ 135.236977] bbswitch: Result of Optimus _DSM call: 01000058
[ 135.250144] pci 0000:01:00.0: >Refused to change power state, currently in D0
[ 135.343414] pci 0000:01:00.0: >power state changed by ACPI to D3
Any suggestions? Am I missing something? I'm thinking of adding bbswitch into modules-load.d and add the parameters as kernel parameters in grub but I'm not happy with that solution…
even if it's the "cleaner" version, imho.
Cheers!
Help is appreciated, thanks. :-)
Edit: If I load bbswitch manually, I have to restart bumblebee to turn the graphics off. I cannot disable the card via bbswitch suggested in bbswitch git repo with command: tee /proc/acpi/bbswitch <<<OFF.
Tried via modules-load.d now and grub boot parameters. The module is loaded but the card is turned on…
$domac.vex dmesg |tail -10
[ 35.421363] atl1c 0000:05:00.0: >irq 55 for MSI/MSI-X
[ 35.433604] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 36.766411] EXT4-fs (sda3): re-mounted. Opts: data=ordered,commit=0
[ 36.773765] EXT4-fs (sda1): re-mounted. Opts: data=ordered,commit=0
[ 107.303982] Bluetooth: Core ver 2.16
[ 107.304005] NET: Registered protocol family 31
[ 107.304007] Bluetooth: HCI device and connection manager initialized
[ 107.304009] Bluetooth: HCI socket layer initialized
[ 107.304011] Bluetooth: L2CAP socket layer initialized
[ 107.304016] Bluetooth: SCO socket layer initialized
Added my bumblebee.conf _here_.
Last edited by domac (2012-10-10 15:28:04)Hey Lekensteyn! First of all, thanks for your answer. :-)
I disabled the nvidia module now. My /etc/modprobe.d now looks like
/etc/modprobe.d
total 20K
drwxr-xr-x 2 root root 4.0K Oct 9 19:32 .
drwxr-xr-x 76 root root 4.0K Oct 9 12:49 ..
-rw-r--r-- 1 root root 45 Oct 9 19:32 bbswitch.conf
-rw-r--r-- 1 root root 18 Aug 8 20:08 nouveau_blacklist.conf
-rw-r--r-- 1 root root 17 Oct 9 12:23 nvidia_blacklist.conf
nvidia_blacklist.conf:
blacklist nvidia
nouveau_blacklist.conf:
blacklist nouveau
bbswitch.conf:
options bbswitch load_state=0 unload_state=0
There is only one more problem left… the bbswitch module does not load on startup. If I # modprobe bbswitch manually the nvidia card is turned off and it also seems the bumblebeed daemon is not started… I have no idea why. It worked with that setup all the time… not much has changed… imho nothing.
Are there any logs I could post or what can I do to eventually fix this problem.
Thanks for the help in advance!
EDIT: I can start the bumblebeed.service manually. + Why are the modules from modprobe.d not loaded? My mkinitcpio.conf.
EDIT2: Found it why bbswitch module wasn't loaded… http://comments.gmane.org/gmane.linux.a … eral/44986… testing this one right now.
Last edited by domac (2012-10-09 17:54:04) -
Xorg not working with NVidia card on laptop.
Hi, I'm new here, but have been using other distros for a while now.
My problem is that whenever i try to use the discrete graphics Xorg freezes and the logs say something about not having a valid display for the card.
The Intel graphics work fine for most things, but for example Steam doesn't launch because of a missing GLX plugin or something.
GDM and Gnome also just give me a "something went wrong" instead of letting me log in or use the desktop (lxdm + kde works fine).
My configs:
10-monitor.conf
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
EndSection
Section "Monitor"
Identifier "Monitor0"
EndSection
Section "Screen"
Identifier "Screen0"
Monitor "Monitor0"
Device "Device0"
EndSection
20-intel.conf
Section "Device"
Identifier "Device1"
Driver "modesetting"
Option "AccelMethod" "none"
EndSection
20-nvidia.conf
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVidia Corporation"
Option "NoLogo" "false"
Option "AllowEmptyInitialConfiguration"
BusID "PCI:4:0:0"
EndSection
/var/log/Xorg.0.log
[ 13.417]
X.Org X Server 1.17.1
Release Date: 2015-02-10
[ 13.417] X Protocol Version 11, Revision 0
[ 13.417] Build Operating System: Linux 3.18.6-1-ARCH x86_64
[ 13.417] Current Operating System: Linux Hawaii-Arch 3.18.6-1-ARCH #1 SMP PREEMPT Sat Feb 7 08:44:05 CET 2015 x86_64
[ 13.417] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=1c7d6663-e037-4ff8-ae85-e51f6745bb45 rw quiet
[ 13.417] Build Date: 22 February 2015 12:50:32PM
[ 13.417]
[ 13.417] Current version of pixman: 0.32.6
[ 13.417] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 13.417] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 13.417] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 13 18:27:43 2015
[ 13.496] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 13.496] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 13.581] (==) ServerLayout "Layout0"
[ 13.581] (**) |-->Screen "Screen0" (0)
[ 13.581] (**) | |-->Monitor "Monitor0"
[ 13.581] (**) | |-->Device "Device0"
[ 13.581] (==) Automatically adding devices
[ 13.581] (==) Automatically enabling devices
[ 13.581] (==) Automatically adding GPU devices
[ 13.602] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/OTF/".
[ 13.602] Entry deleted from font path.
[ 13.602] (Run 'mkfontdir' on "/usr/share/fonts/OTF/").
[ 13.602] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 13.602] Entry deleted from font path.
[ 13.638] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 13.638] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 13.638] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 13.638] (II) Loader magic: 0x815d80
[ 13.638] (II) Module ABI versions:
[ 13.638] X.Org ANSI C Emulation: 0.4
[ 13.638] X.Org Video Driver: 19.0
[ 13.638] X.Org XInput driver : 21.0
[ 13.638] X.Org Server Extension : 9.0
[ 13.639] (EE) systemd-logind: failed to get session: PID 283 does not belong to any known session
[ 13.639] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 13.639] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 13.640] (--) PCI:*(0:0:2:0) 8086:0a16:1043:131d rev 9, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
[ 13.640] (--) PCI: (0:4:0:0) 10de:1292:1043:131d rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000d000/128, BIOS @ 0x????????/524288
[ 13.640] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 13.641] (II) LoadModule: "glx"
[ 13.668] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 14.479] (II) Module glx: vendor="NVIDIA Corporation"
[ 14.479] compiled for 4.0.2, module version = 1.0.0
[ 14.479] Module class: X.Org Server Extension
[ 14.487] (II) NVIDIA GLX Module 346.35 Sat Jan 10 20:53:39 PST 2015
[ 14.491] (II) LoadModule: "nvidia"
[ 14.492] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 14.588] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 14.588] compiled for 4.0.2, module version = 1.0.0
[ 14.588] Module class: X.Org Video Driver
[ 14.593] (II) NVIDIA dlloader X Driver 346.35 Sat Jan 10 20:32:18 PST 2015
[ 14.593] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 14.594] (++) using VT number 1
[ 14.595] (II) Loading sub module "fb"
[ 14.595] (II) LoadModule: "fb"
[ 14.595] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 14.611] (II) Module fb: vendor="X.Org Foundation"
[ 14.611] compiled for 1.17.1, module version = 1.0.0
[ 14.611] ABI class: X.Org ANSI C Emulation, version 0.4
[ 14.611] (II) Loading sub module "wfb"
[ 14.611] (II) LoadModule: "wfb"
[ 14.612] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 14.614] (II) Module wfb: vendor="X.Org Foundation"
[ 14.614] compiled for 1.17.1, module version = 1.0.0
[ 14.614] ABI class: X.Org ANSI C Emulation, version 0.4
[ 14.614] (II) Loading sub module "ramdac"
[ 14.614] (II) LoadModule: "ramdac"
[ 14.614] (II) Module "ramdac" already built-in
[ 14.616] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Screen0" for depth/fbbpp 24/32
[ 14.616] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 14.616] (==) NVIDIA(0): RGB weight 888
[ 14.616] (==) NVIDIA(0): Default visual is TrueColor
[ 14.616] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 14.617] (**) NVIDIA(0): Option "NoLogo" "false"
[ 14.617] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration"
[ 14.617] (**) NVIDIA(0): Enabling 2D acceleration
[ 19.094] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
[ 19.096] (II) NVIDIA(0): NVIDIA GPU GeForce GT 740M (GK208) at PCI:4:0:0 (GPU-0)
[ 19.096] (--) NVIDIA(0): Memory: 2097152 kBytes
[ 19.096] (--) NVIDIA(0): VideoBIOS: 80.28.2a.00.3d
[ 19.096] (II) NVIDIA(0): Detected PCI Express Link width: 8X
[ 19.096] (--) NVIDIA(0): Valid display device(s) on GeForce GT 740M at PCI:4:0:0
[ 19.096] (--) NVIDIA(0): none
[ 19.096] (II) NVIDIA(0): Validated MetaModes:
[ 19.096] (II) NVIDIA(0): "NULL"
[ 19.096] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
[ 19.096] (WW) NVIDIA(0): Unable to get display device for DPI computation.
[ 19.096] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[ 19.096] (--) Depth 24 pixmap format is 32 bpp
[ 19.097] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[ 19.097] (II) NVIDIA: access.
[ 19.100] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 19.100] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 19.100] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 19.100] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 19.100] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 19.100] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 19.100] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 19.100] (II) NVIDIA(0): Config Options in the README.
[ 19.100] (II) NVIDIA(0): Setting mode "NULL"
[ 19.150] (II) NVIDIA(0): Built-in logo is bigger than the screen.
[ 19.201] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 19.201] (==) NVIDIA(0): Backing store enabled
[ 19.201] (==) NVIDIA(0): Silken mouse enabled
[ 19.202] (==) NVIDIA(0): DPMS enabled
[ 19.220] (II) Loading sub module "dri2"
[ 19.220] (II) LoadModule: "dri2"
[ 19.220] (II) Module "dri2" already built-in
[ 19.220] (II) NVIDIA(0): [DRI2] Setup complete
[ 19.220] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 19.220] (--) RandR disabled
[ 19.242] (II) Initializing extension GLX
[ 19.242] (II) Indirect GLX disabled.(II) config/udev: Adding input device Power Button (/dev/input/event9)
[ 19.774] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 19.774] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 19.774] (II) LoadModule: "libinput"
[ 19.774] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 19.817] (II) Module libinput: vendor="X.Org Foundation"
[ 19.817] compiled for 1.17.1, module version = 0.6.0
[ 19.817] Module class: X.Org XInput Driver
[ 19.817] ABI class: X.Org XInput driver, version 21.0
[ 19.817] (II) Using input driver 'libinput' for 'Power Button'
[ 19.817] (**) Power Button: always reports core events
[ 19.817] (**) Option "Device" "/dev/input/event9"
[ 19.818] (II) input device 'Power Button', /dev/input/event9 is a keyboard
[ 19.836] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input13/event9"
[ 19.836] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 19.837] (II) input device 'Power Button', /dev/input/event9 is a keyboard
[ 19.837] (II) config/udev: Adding input device Video Bus (/dev/input/event11)
[ 19.837] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 19.837] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 19.837] (II) Using input driver 'libinput' for 'Video Bus'
[ 19.837] (**) Video Bus: always reports core events
[ 19.837] (**) Option "Device" "/dev/input/event11"
[ 19.837] (II) input device 'Video Bus', /dev/input/event11 is a keyboard
[ 19.863] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input15/event11"
[ 19.863] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 19.863] (II) input device 'Video Bus', /dev/input/event11 is a keyboard
[ 19.864] (II) config/udev: Adding input device Video Bus (/dev/input/event10)
[ 19.864] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 19.864] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 19.864] (II) Using input driver 'libinput' for 'Video Bus'
[ 19.864] (**) Video Bus: always reports core events
[ 19.864] (**) Option "Device" "/dev/input/event10"
[ 19.864] (II) input device 'Video Bus', /dev/input/event10 is a keyboard
[ 19.890] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:05/LNXVIDEO:00/input/input14/event10"
[ 19.890] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 19.890] (II) input device 'Video Bus', /dev/input/event10 is a keyboard
[ 19.890] (II) config/udev: Adding input device Lid Switch (/dev/input/event7)
[ 19.890] (II) No input driver specified, ignoring this device.
[ 19.890] (II) This device may have been added with another device file.
[ 19.890] (II) config/udev: Adding input device Sleep Button (/dev/input/event8)
[ 19.890] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 19.890] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 19.890] (II) Using input driver 'libinput' for 'Sleep Button'
[ 19.890] (**) Sleep Button: always reports core events
[ 19.890] (**) Option "Device" "/dev/input/event8"
[ 19.891] (II) input device 'Sleep Button', /dev/input/event8 is a keyboard
[ 19.916] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input12/event8"
[ 19.916] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 19.917] (II) input device 'Sleep Button', /dev/input/event8 is a keyboard
[ 19.917] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event16)
[ 19.917] (II) No input driver specified, ignoring this device.
[ 19.917] (II) This device may have been added with another device file.
[ 19.917] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event17)
[ 19.917] (II) No input driver specified, ignoring this device.
[ 19.917] (II) This device may have been added with another device file.
[ 19.917] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event18)
[ 19.917] (II) No input driver specified, ignoring this device.
[ 19.917] (II) This device may have been added with another device file.
[ 19.918] (II) config/udev: Adding input device Razer Razer Kraken 7.1 (/dev/input/event4)
[ 19.918] (**) Razer Razer Kraken 7.1: Applying InputClass "evdev keyboard catchall"
[ 19.918] (**) Razer Razer Kraken 7.1: Applying InputClass "libinput keyboard catchall"
[ 19.918] (II) Using input driver 'libinput' for 'Razer Razer Kraken 7.1'
[ 19.918] (**) Razer Razer Kraken 7.1: always reports core events
[ 19.918] (**) Option "Device" "/dev/input/event4"
[ 19.918] (II) input device 'Razer Razer Kraken 7.1', /dev/input/event4 is a keyboard
[ 19.970] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.3/0003:1532:0501.0004/input/input8/event4"
[ 19.970] (II) XINPUT: Adding extended input device "Razer Razer Kraken 7.1" (type: KEYBOARD, id 10)
[ 19.970] (II) input device 'Razer Razer Kraken 7.1', /dev/input/event4 is a keyboard
[ 19.970] (II) config/udev: Adding input device CM Storm Coolermaster Novatouch TKL (/dev/input/event5)
[ 19.970] (**) CM Storm Coolermaster Novatouch TKL: Applying InputClass "evdev keyboard catchall"
[ 19.970] (**) CM Storm Coolermaster Novatouch TKL: Applying InputClass "libinput keyboard catchall"
[ 19.970] (II) Using input driver 'libinput' for 'CM Storm Coolermaster Novatouch TKL'
[ 19.970] (**) CM Storm Coolermaster Novatouch TKL: always reports core events
[ 19.970] (**) Option "Device" "/dev/input/event5"
[ 19.970] (II) input device 'CM Storm Coolermaster Novatouch TKL', /dev/input/event5 is a keyboard
[ 20.010] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:2516:0026.0005/input/input9/event5"
[ 20.010] (II) XINPUT: Adding extended input device "CM Storm Coolermaster Novatouch TKL" (type: KEYBOARD, id 11)
[ 20.010] (II) input device 'CM Storm Coolermaster Novatouch TKL', /dev/input/event5 is a keyboard
[ 20.010] (II) config/udev: Adding input device CM Storm Coolermaster Novatouch TKL (/dev/input/event6)
[ 20.010] (**) CM Storm Coolermaster Novatouch TKL: Applying InputClass "evdev keyboard catchall"
[ 20.010] (**) CM Storm Coolermaster Novatouch TKL: Applying InputClass "libinput keyboard catchall"
[ 20.010] (II) Using input driver 'libinput' for 'CM Storm Coolermaster Novatouch TKL'
[ 20.010] (**) CM Storm Coolermaster Novatouch TKL: always reports core events
[ 20.010] (**) Option "Device" "/dev/input/event6"
[ 20.010] (II) input device 'CM Storm Coolermaster Novatouch TKL', /dev/input/event6 is a keyboard
[ 20.063] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.1/0003:2516:0026.0006/input/input10/event6"
[ 20.063] (II) XINPUT: Adding extended input device "CM Storm Coolermaster Novatouch TKL" (type: KEYBOARD, id 12)
[ 20.063] (II) input device 'CM Storm Coolermaster Novatouch TKL', /dev/input/event6 is a keyboard
[ 20.064] (II) config/udev: Adding input device USB2.0 HD UVC WebCam (/dev/input/event13)
[ 20.064] (**) USB2.0 HD UVC WebCam: Applying InputClass "evdev keyboard catchall"
[ 20.064] (**) USB2.0 HD UVC WebCam: Applying InputClass "libinput keyboard catchall"
[ 20.064] (II) Using input driver 'libinput' for 'USB2.0 HD UVC WebCam'
[ 20.064] (**) USB2.0 HD UVC WebCam: always reports core events
[ 20.064] (**) Option "Device" "/dev/input/event13"
[ 20.064] (II) input device 'USB2.0 HD UVC WebCam', /dev/input/event13 is a keyboard
[ 20.116] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-5/2-5:1.0/input/input17/event13"
[ 20.116] (II) XINPUT: Adding extended input device "USB2.0 HD UVC WebCam" (type: KEYBOARD, id 13)
[ 20.117] (II) input device 'USB2.0 HD UVC WebCam', /dev/input/event13 is a keyboard
[ 20.117] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event19)
[ 20.117] (II) No input driver specified, ignoring this device.
[ 20.117] (II) This device may have been added with another device file.
[ 20.117] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event20)
[ 20.117] (II) No input driver specified, ignoring this device.
[ 20.117] (II) This device may have been added with another device file.
[ 20.117] (II) config/udev: Adding input device Razer Razer DeathAdder 2013 (/dev/input/event1)
[ 20.117] (**) Razer Razer DeathAdder 2013: Applying InputClass "evdev pointer catchall"
[ 20.117] (**) Razer Razer DeathAdder 2013: Applying InputClass "libinput pointer catchall"
[ 20.117] (II) Using input driver 'libinput' for 'Razer Razer DeathAdder 2013'
[ 20.117] (**) Razer Razer DeathAdder 2013: always reports core events
[ 20.117] (**) Option "Device" "/dev/input/event1"
[ 20.118] (II) input device 'Razer Razer DeathAdder 2013', /dev/input/event1 is a pointer caps = relative-motion button
[ 20.170] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:1532:0037.0001/input/input5/event1"
[ 20.170] (II) XINPUT: Adding extended input device "Razer Razer DeathAdder 2013" (type: MOUSE, id 14)
[ 20.170] (**) Option "AccelerationScheme" "none"
[ 20.170] (**) Razer Razer DeathAdder 2013: (accel) selected scheme none/0
[ 20.170] (**) Razer Razer DeathAdder 2013: (accel) acceleration factor: 2.000
[ 20.170] (**) Razer Razer DeathAdder 2013: (accel) acceleration threshold: 4
[ 20.170] (II) input device 'Razer Razer DeathAdder 2013', /dev/input/event1 is a pointer caps = relative-motion button
[ 20.170] (II) config/udev: Adding input device Razer Razer DeathAdder 2013 (/dev/input/mouse0)
[ 20.170] (II) No input driver specified, ignoring this device.
[ 20.170] (II) This device may have been added with another device file.
[ 20.171] (II) config/udev: Adding input device Razer Razer DeathAdder 2013 (/dev/input/event2)
[ 20.171] (**) Razer Razer DeathAdder 2013: Applying InputClass "evdev keyboard catchall"
[ 20.171] (**) Razer Razer DeathAdder 2013: Applying InputClass "libinput keyboard catchall"
[ 20.171] (II) Using input driver 'libinput' for 'Razer Razer DeathAdder 2013'
[ 20.171] (**) Razer Razer DeathAdder 2013: always reports core events
[ 20.171] (**) Option "Device" "/dev/input/event2"
[ 20.171] (II) input device 'Razer Razer DeathAdder 2013', /dev/input/event2 is a keyboard
[ 20.223] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:1532:0037.0002/input/input6/event2"
[ 20.223] (II) XINPUT: Adding extended input device "Razer Razer DeathAdder 2013" (type: KEYBOARD, id 15)
[ 20.223] (II) input device 'Razer Razer DeathAdder 2013', /dev/input/event2 is a keyboard
[ 20.224] (II) config/udev: Adding input device Razer Razer DeathAdder 2013 (/dev/input/event3)
[ 20.224] (**) Razer Razer DeathAdder 2013: Applying InputClass "evdev keyboard catchall"
[ 20.224] (**) Razer Razer DeathAdder 2013: Applying InputClass "libinput keyboard catchall"
[ 20.224] (II) Using input driver 'libinput' for 'Razer Razer DeathAdder 2013'
[ 20.224] (**) Razer Razer DeathAdder 2013: always reports core events
[ 20.224] (**) Option "Device" "/dev/input/event3"
[ 20.224] (II) input device 'Razer Razer DeathAdder 2013', /dev/input/event3 is a keyboard
[ 20.276] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.3/1-1.3:1.2/0003:1532:0037.0003/input/input7/event3"
[ 20.276] (II) XINPUT: Adding extended input device "Razer Razer DeathAdder 2013" (type: KEYBOARD, id 16)
[ 20.277] (II) input device 'Razer Razer DeathAdder 2013', /dev/input/event3 is a keyboard
[ 20.277] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event14)
[ 20.277] (**) Asus WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 20.277] (**) Asus WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[ 20.277] (II) Using input driver 'libinput' for 'Asus WMI hotkeys'
[ 20.277] (**) Asus WMI hotkeys: always reports core events
[ 20.277] (**) Option "Device" "/dev/input/event14"
[ 20.277] (II) input device 'Asus WMI hotkeys', /dev/input/event14 is a keyboard
[ 20.330] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input22/event14"
[ 20.330] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 17)
[ 20.330] (II) input device 'Asus WMI hotkeys', /dev/input/event14 is a keyboard
[ 20.330] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 20.330] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 20.330] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 20.330] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 20.330] (**) AT Translated Set 2 keyboard: always reports core events
[ 20.330] (**) Option "Device" "/dev/input/event0"
[ 20.330] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[ 20.383] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 20.383] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 18)
[ 20.383] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[ 20.384] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event15)
[ 20.384] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[ 20.384] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[ 20.384] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[ 20.384] (**) ETPS/2 Elantech Touchpad: Applying InputClass "libinput touchpad catchall"
[ 20.384] (II) Using input driver 'libinput' for 'ETPS/2 Elantech Touchpad'
[ 20.384] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 20.384] (**) Option "Device" "/dev/input/event15"
[ 20.384] (II) input device 'ETPS/2 Elantech Touchpad', /dev/input/event15 is a touchpad
[ 20.436] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input21/event15"
[ 20.436] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 19)
[ 20.436] (**) Option "AccelerationScheme" "none"
[ 20.436] (**) ETPS/2 Elantech Touchpad: (accel) selected scheme none/0
[ 20.436] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[ 20.436] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[ 20.437] (II) input device 'ETPS/2 Elantech Touchpad', /dev/input/event15 is a touchpad
[ 20.437] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse1)
[ 20.437] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 20.437] (II) config/udev: Adding input device PC Speaker (/dev/input/event12)
[ 20.437] (II) No input driver specified, ignoring this device.
[ 20.437] (II) This device may have been added with another device file.I had a similar issue but i solved it following the instructions explained here https://wiki.archlinux.org/index.php/Bu … l.2FNVIDIA.
I also reccomend you to install the bbswitch package which disables NVIDIA discrete graphics card when isn't used. -
[SOLVED?] Problem with nVidia card
This is my first post, so; hello to everyone!! Thx in advance to this great community!!
My problem is pretty strange and anoying. I have an nVidia 8600GT in a Abit AX78 MB running Arch with KDE. Anything is going right until logon process. I write the user and password in KDM screen and then, after de animation of init proces of KDE, all graphics displayed are corrupted (a rectangle in the upper left corner is showed) and that's it. Only work the mouse pointer.
This malfunction its showed by the nouveau driver AND the proprietary driver... So i think the problem is it in other place than the driver of the card.
The Xorg.0.log and dmesg.log files are atached at the end of this thread.
I hope that annyone can help me.
Thx in advance again.
The Xorg.0.log file contains this:
[ 15.809]
X.Org X Server 1.10.3
Release Date: 2011-07-08
[ 15.814] X Protocol Version 11, Revision 0
[ 15.814] Build Operating System: Linux 2.6.39-ARCH i686
[ 15.814] Current Operating System: Linux hidramedia_host 2.6.39-ARCH #1 SMP PREEMPT Sat Jul 9 15:31:04 CEST 2011 i686
[ 15.815] Kernel command line: root=/dev/sda5 ro
[ 15.815] Build Date: 09 July 2011 07:57:07AM
[ 15.815]
[ 15.815] Current version of pixman: 0.22.2
[ 15.815] Before reporting problems, check [url]http://wiki.x.org[/url]
to make sure that you have the latest version.
[ 15.815] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 15.815] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Aug 1 14:13:23 2011
[ 15.829] (==) Using config file: "/etc/X11/xorg.conf"
[ 15.829] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 15.835] (==) ServerLayout "Layout0"
[ 15.835] (**) |-->Screen "Screen0" (0)
[ 15.835] (**) | |-->Monitor "Monitor0"
[ 15.836] (**) | |-->Device "Device0"
[ 15.836] (**) |-->Input Device "Keyboard0"
[ 15.836] (**) |-->Input Device "Mouse0"
[ 15.836] (==) Automatically adding devices
[ 15.836] (==) Automatically enabling devices
[ 15.859] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 15.859] Entry deleted from font path.
[ 15.859] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 15.859] Entry deleted from font path.
[ 15.859] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 15.859] Entry deleted from font path.
[ 15.859] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 15.859] Entry deleted from font path.
[ 15.859] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 15.859] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 15.859] Entry deleted from font path.
[ 15.859] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 15.859] (==) FontPath set to:
/usr/share/fonts/misc/
[ 15.859] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 15.859] (**) Extension "Composite" is disabled
[ 15.859] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 15.859] (WW) Disabling Keyboard0
[ 15.859] (WW) Disabling Mouse0
[ 15.859] (II) Loader magic: 0x822e1a0
[ 15.859] (II) Module ABI versions:
[ 15.859] X.Org ANSI C Emulation: 0.4
[ 15.859] X.Org Video Driver: 10.0
[ 15.859] X.Org XInput driver : 12.2
[ 15.859] X.Org Server Extension : 5.0
[ 15.860] (--) PCI:*(0:1:0:0) 10de:0402:0000:0000 rev 161, Mem @ 0xfa000000/16777216, 0xd0000000/268435456, 0xf8000000/33554432, I/O @ 0x0000df00/128, BIOS @ 0x????????/131072
[ 15.860] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 15.860] (II) LoadModule: "extmod"
[ 15.871] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 15.880] (II) Module extmod: vendor="X.Org Foundation"
[ 15.880] compiled for 1.10.3, module version = 1.0.0
[ 15.880] Module class: X.Org Server Extension
[ 15.880] ABI class: X.Org Server Extension, version 5.0
[ 15.880] (II) Loading extension MIT-SCREEN-SAVER
[ 15.880] (II) Loading extension XFree86-VidModeExtension
[ 15.880] (II) Loading extension XFree86-DGA
[ 15.880] (II) Loading extension DPMS
[ 15.880] (II) Loading extension XVideo
[ 15.880] (II) Loading extension XVideo-MotionCompensation
[ 15.880] (II) Loading extension X-Resource
[ 15.880] (II) LoadModule: "dbe"
[ 15.880] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 15.881] (II) Module dbe: vendor="X.Org Foundation"
[ 15.881] compiled for 1.10.3, module version = 1.0.0
[ 15.881] Module class: X.Org Server Extension
[ 15.881] ABI class: X.Org Server Extension, version 5.0
[ 15.881] (II) Loading extension DOUBLE-BUFFER
[ 15.881] (II) LoadModule: "glx"
[ 15.881] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 16.640] (II) Module glx: vendor="NVIDIA Corporation"
[ 16.640] compiled for 4.0.2, module version = 1.0.0
[ 16.640] Module class: X.Org Server Extension
[ 16.640] (II) NVIDIA GLX Module 275.21 Mon Jul 18 14:55:52 PDT 2011
[ 16.640] (II) Loading extension GLX
[ 16.640] (II) LoadModule: "record"
[ 16.641] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 16.645] (II) Module record: vendor="X.Org Foundation"
[ 16.645] compiled for 1.10.3, module version = 1.13.0
[ 16.645] Module class: X.Org Server Extension
[ 16.645] ABI class: X.Org Server Extension, version 5.0
[ 16.645] (II) Loading extension RECORD
[ 16.645] (II) LoadModule: "dri"
[ 16.645] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 16.661] (II) Module dri: vendor="X.Org Foundation"
[ 16.661] compiled for 1.10.3, module version = 1.0.0
[ 16.661] ABI class: X.Org Server Extension, version 5.0
[ 16.661] (II) Loading extension XFree86-DRI
[ 16.661] (II) LoadModule: "dri2"
[ 16.661] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 16.662] (II) Module dri2: vendor="X.Org Foundation"
[ 16.662] compiled for 1.10.3, module version = 1.2.0
[ 16.662] ABI class: X.Org Server Extension, version 5.0
[ 16.662] (II) Loading extension DRI2
[ 16.662] (II) LoadModule: "nvidia"
[ 16.662] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 16.709] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 16.709] compiled for 4.0.2, module version = 1.0.0
[ 16.709] Module class: X.Org Video Driver
[ 16.732] (II) NVIDIA dlloader X Driver 275.21 Mon Jul 18 14:38:30 PDT 2011
[ 16.737] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 16.740] (++) using VT number 7
[ 16.751] (II) Loading sub module "fb"
[ 16.751] (II) LoadModule: "fb"
[ 16.751] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 16.762] (II) Module fb: vendor="X.Org Foundation"
[ 16.762] compiled for 1.10.3, module version = 1.0.0
[ 16.762] ABI class: X.Org ANSI C Emulation, version 0.4
[ 16.762] (II) Loading sub module "wfb"
[ 16.762] (II) LoadModule: "wfb"
[ 16.763] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 16.769] (II) Module wfb: vendor="X.Org Foundation"
[ 16.769] compiled for 1.10.3, module version = 1.0.0
[ 16.769] ABI class: X.Org ANSI C Emulation, version 0.4
[ 16.769] (II) Loading sub module "ramdac"
[ 16.769] (II) LoadModule: "ramdac"
[ 16.769] (II) Module "ramdac" already built-in
[ 16.771] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 16.771] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 16.771] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 16.780] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 16.780] (==) NVIDIA(0): RGB weight 888
[ 16.780] (==) NVIDIA(0): Default visual is TrueColor
[ 16.780] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 17.785] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 17.785] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 17.789] (II) NVIDIA(0): NVIDIA GPU GeForce 8600 GT (G84) at PCI:1:0:0 (GPU-0)
[ 17.789] (--) NVIDIA(0): Memory: 262144 kBytes
[ 17.789] (--) NVIDIA(0): VideoBIOS: 60.84.35.00.00
[ 17.789] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 17.789] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 17.789] (--) NVIDIA(0): Connected display device(s) on GeForce 8600 GT at PCI:1:0:0
[ 17.789] (--) NVIDIA(0): Samsung SyncMaster (CRT-0)
[ 17.789] (--) NVIDIA(0): Samsung SyncMaster (CRT-0): 400.0 MHz maximum pixel clock
[ 17.859] (II) NVIDIA(0): Assigned Display Device: CRT-0
[ 17.859] (==) NVIDIA(0):
[ 17.859] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 17.859] (==) NVIDIA(0): will be used as the requested mode.
[ 17.859] (==) NVIDIA(0):
[ 17.859] (II) NVIDIA(0): Validated modes:
[ 17.859] (II) NVIDIA(0): "nvidia-auto-select"
[ 17.859] (II) NVIDIA(0): Virtual screen size determined to be 800 x 600
[ 17.900] (--) NVIDIA(0): DPI set to (72, 72); computed from "UseEdidDpi" X config
[ 17.900] (--) NVIDIA(0): option
[ 17.900] (--) Depth 24 pixmap format is 32 bpp
[ 17.901] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[ 17.905] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 17.905] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 17.905] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 17.905] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 17.905] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 17.905] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 17.905] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 17.905] (II) NVIDIA(0): Config Options in the README.
[ 17.908] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[ 17.946] (II) Loading extension NV-GLX
[ 18.001] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 18.002] (==) NVIDIA(0): Backing store disabled
[ 18.002] (==) NVIDIA(0): Silken mouse enabled
[ 18.002] (**) NVIDIA(0): DPMS enabled
[ 18.002] (II) Loading extension NV-CONTROL
[ 18.003] (II) Loading extension XINERAMA
[ 18.003] (II) Loading sub module "dri2"
[ 18.003] (II) LoadModule: "dri2"
[ 18.003] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 18.003] (II) Module dri2: vendor="X.Org Foundation"
[ 18.003] compiled for 1.10.3, module version = 1.2.0
[ 18.003] ABI class: X.Org Server Extension, version 5.0
[ 18.003] (II) NVIDIA(0): [DRI2] Setup complete
[ 18.003] (==) RandR enabled
[ 18.003] (II) Initializing built-in extension Generic Event Extension
[ 18.003] (II) Initializing built-in extension SHAPE
[ 18.003] (II) Initializing built-in extension MIT-SHM
[ 18.003] (II) Initializing built-in extension XInputExtension
[ 18.003] (II) Initializing built-in extension XTEST
[ 18.003] (II) Initializing built-in extension BIG-REQUESTS
[ 18.003] (II) Initializing built-in extension SYNC
[ 18.003] (II) Initializing built-in extension XKEYBOARD
[ 18.003] (II) Initializing built-in extension XC-MISC
[ 18.003] (II) Initializing built-in extension SECURITY
[ 18.003] (II) Initializing built-in extension XINERAMA
[ 18.003] (II) Initializing built-in extension XFIXES
[ 18.003] (II) Initializing built-in extension RENDER
[ 18.003] (II) Initializing built-in extension RANDR
[ 18.003] (II) Initializing built-in extension COMPOSITE
[ 18.003] (II) Initializing built-in extension DAMAGE
[ 18.005] (II) Initializing extension GLX
[ 18.213] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 18.213] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 18.213] (II) LoadModule: "evdev"
[ 18.213] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 18.214] (II) Module evdev: vendor="X.Org Foundation"
[ 18.214] compiled for 1.10.0, module version = 2.6.0
[ 18.214] Module class: X.Org XInput Driver
[ 18.214] ABI class: X.Org XInput driver, version 12.2
[ 18.214] (II) Using input driver 'evdev' for 'Power Button'
[ 18.214] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 18.214] (**) Power Button: always reports core events
[ 18.214] (**) Power Button: Device: "/dev/input/event3"
[ 18.226] (--) Power Button: Found keys
[ 18.226] (II) Power Button: Configuring as keyboard
[ 18.226] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 18.226] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 18.226] (**) Option "xkb_rules" "evdev"
[ 18.226] (**) Option "xkb_model" "evdev"
[ 18.226] (**) Option "xkb_layout" "us"
[ 18.252] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 18.252] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 18.252] (II) Using input driver 'evdev' for 'Power Button'
[ 18.252] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 18.252] (**) Power Button: always reports core events
[ 18.252] (**) Power Button: Device: "/dev/input/event2"
[ 18.266] (--) Power Button: Found keys
[ 18.266] (II) Power Button: Configuring as keyboard
[ 18.266] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[ 18.266] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 18.266] (**) Option "xkb_rules" "evdev"
[ 18.266] (**) Option "xkb_model" "evdev"
[ 18.266] (**) Option "xkb_layout" "us"
[ 18.271] (II) config/udev: Adding input device Primax Electronics Wireless Mouse (/dev/input/event1)
[ 18.271] (**) Primax Electronics Wireless Mouse: Applying InputClass "evdev pointer catchall"
[ 18.271] (II) Using input driver 'evdev' for 'Primax Electronics Wireless Mouse'
[ 18.271] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 18.271] (**) Primax Electronics Wireless Mouse: always reports core events
[ 18.271] (**) Primax Electronics Wireless Mouse: Device: "/dev/input/event1"
[ 18.283] (--) Primax Electronics Wireless Mouse: Found 3 mouse buttons
[ 18.283] (--) Primax Electronics Wireless Mouse: Found scroll wheel(s)
[ 18.283] (--) Primax Electronics Wireless Mouse: Found relative axes
[ 18.283] (--) Primax Electronics Wireless Mouse: Found x and y relative axes
[ 18.283] (II) Primax Electronics Wireless Mouse: Configuring as mouse
[ 18.283] (II) Primax Electronics Wireless Mouse: Adding scrollwheel support
[ 18.283] (**) Primax Electronics Wireless Mouse: YAxisMapping: buttons 4 and 5
[ 18.283] (**) Primax Electronics Wireless Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 18.283] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.4/usb6/6-2/6-2:1.0/input/input1/event1"
[ 18.283] (II) XINPUT: Adding extended input device "Primax Electronics Wireless Mouse" (type: MOUSE)
[ 18.283] (II) Primax Electronics Wireless Mouse: initialized for relative axes.
[ 18.283] (**) Primax Electronics Wireless Mouse: (accel) keeping acceleration scheme 1
[ 18.283] (**) Primax Electronics Wireless Mouse: (accel) acceleration profile 0
[ 18.283] (**) Primax Electronics Wireless Mouse: (accel) acceleration factor: 2.000
[ 18.283] (**) Primax Electronics Wireless Mouse: (accel) acceleration threshold: 4
[ 18.283] (II) config/udev: Adding input device Primax Electronics Wireless Mouse (/dev/input/mouse0)
[ 18.283] (II) No input driver/identifier specified (ignoring)
[ 18.285] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event5)
[ 18.285] (II) No input driver/identifier specified (ignoring)
[ 18.285] (II) config/udev: Adding input device HDA ATI SB Headphone (/dev/input/event6)
[ 18.285] (II) No input driver/identifier specified (ignoring)
[ 18.286] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 18.286] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 18.286] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 18.286] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 18.286] (**) AT Translated Set 2 keyboard: always reports core events
[ 18.286] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 18.300] (--) AT Translated Set 2 keyboard: Found keys
[ 18.300] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 18.300] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 18.300] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 18.300] (**) Option "xkb_rules" "evdev"
[ 18.300] (**) Option "xkb_model" "evdev"
[ 18.300] (**) Option "xkb_layout" "us"
[ 18.300] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 18.300] (II) No input driver/identifier specified (ignoring)
[ 1563.531] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[ 1563.587] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 1563.587] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 1563.587] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 1563.587] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 1563.587] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 1563.587] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 1563.587] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 1563.587] (II) NVIDIA(0): Config Options in the README.
And the dmesg.log file contains this:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.39-ARCH (thomas@evey) (gcc version 4.6.1 (GCC) ) #1 SMP PREEMPT Sat Jul 9 15:31:04 CEST 2011
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
[ 0.000000] BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] DMI 2.5 present.
[ 0.000000] DMI: . ./AX78(AMD770+SB600), BIOS 6.00 PG 01/17/2008
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x7fff0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-CFFFF uncachable
[ 0.000000] D0000-D3FFF write-back
[ 0.000000] D4000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [c00f41f0] f41f0
[ 0.000000] initial memory mapped : 0 - 01c00000
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000
[ 0.000000] RAMDISK: 7fdc9000 - 7ffe0000
[ 0.000000] Allocated new RAMDISK: 375e7000 - 377fd792
[ 0.000000] Move RAMDISK from 000000007fdc9000 - 000000007ffdf791 to 375e7000 - 377fd791
[ 0.000000] ACPI: RSDP 000f81d0 00024 (v02 AMD770)
[ 0.000000] ACPI: RSDT 7fff3000 00038 (v01 AMD770 AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 7fff3080 00074 (v01 AMD770 AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DSDT 7fff3100 051E2 (v01 AMD770 AWRDACPI 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS 7fff0000 00040
[ 0.000000] ACPI: SSDT 7fff83c0 002CC (v01 PTLTD POWERNOW 00000001 LTP 00000001)
[ 0.000000] ACPI: HPET 7fff86c0 00038 (v01 AMD770 AWRDACPI 42302E31 AWRD 00000098)
[ 0.000000] ACPI: MCFG 7fff8700 0003C (v01 AMD770 AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: APIC 7fff8300 00084 (v01 AMD770 AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1159MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0007fff0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007fff0
[ 0.000000] On node 0 totalpages: 524159
[ 0.000000] free_area_init_node: node 0, pgdat c14a1980, node_mem_map f65e6200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2320 pages used for memmap
[ 0.000000] HighMem zone: 294626 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 12 pages/cpu @f6000000 s27648 r0 d21504 u1048576
[ 0.000000] pcpu-alloc: s27648 r0 d21504 u1048576 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520063
[ 0.000000] Kernel command line: root=/dev/sda5 ro
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 8388096 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0007fff0)
[ 0.000000] Memory: 2062632k/2097088k available (3376k kernel code, 34004k reserved, 1390k data, 512k init, 1187784k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc14a8000 - 0xc1528000 ( 512 kB)
[ 0.000000] .data : 0xc134c3bf - 0xc14a7c00 (1390 kB)
[ 0.000000] .text : 0xc1000000 - 0xc134c3bf (3376 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptable hierarchical RCU implementation.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:512
[ 0.000000] CPU 0 irqstacks, hard=f540c000 soft=f540e000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration failed
[ 0.000000] TSC: Unable to calibrate against PIT
[ 0.000000] TSC: using HPET reference calibration
[ 0.000000] Detected 2700.236 MHz processor.
[ 0.000000] Marking TSC unstable due to TSCs unsynchronized
[ 0.016736] Calibrating delay loop (skipped), value calculated using timer frequency.. 5402.49 BogoMIPS (lpj=9000786)
[ 0.016870] pid_max: default: 32768 minimum: 301
[ 0.016983] Security Framework initialized
[ 0.017051] AppArmor: AppArmor disabled by boot time parameter
[ 0.017144] Mount-cache hash table entries: 512
[ 0.017404] Initializing cgroup subsys ns
[ 0.017471] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.017549] Initializing cgroup subsys cpuacct
[ 0.017625] Initializing cgroup subsys memory
[ 0.017701] Initializing cgroup subsys devices
[ 0.017767] Initializing cgroup subsys freezer
[ 0.017833] Initializing cgroup subsys net_cls
[ 0.017899] Initializing cgroup subsys blkio
[ 0.017995] CPU: Physical Processor ID: 0
[ 0.018060] CPU: Processor Core ID: 0
[ 0.018126] mce: CPU supports 5 MCE banks
[ 0.018199] using C1E aware idle routine
[ 0.019127] ACPI: Core revision 20110316
[ 0.023362] ftrace: allocating 15225 entries in 30 pages
[ 0.026734] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.027332] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.061631] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ stepping 02
[ 0.063329] Performance Events: AMD PMU driver.
[ 0.063329] ... version: 0
[ 0.063329] ... bit width: 48
[ 0.063329] ... generic registers: 4
[ 0.063329] ... value mask: 0000ffffffffffff
[ 0.063329] ... max period: 00007fffffffffff
[ 0.063329] ... fixed-purpose events: 0
[ 0.063329] ... event mask: 000000000000000f
[ 0.080086] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.106674] CPU 1 irqstacks, hard=f54b4000 soft=f54b6000
[ 0.106676] Booting Node 0, Processors #1
[ 0.106783] smpboot cpu 1: start_ip = 9b000
[ 0.019998] Initializing CPU#1
[ 0.200085] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.206657] Brought up 2 CPUs
[ 0.206721] Total of 2 processors activated (10805.88 BogoMIPS).
[ 0.207206] devtmpfs: initialized
[ 0.207206] PM: Registering ACPI NVS region at 7fff0000 (12288 bytes)
[ 0.207649] print_constraints: dummy:
[ 0.207764] NET: Registered protocol family 16
[ 0.207919] node 0 link 0: io port [c000, ffff]
[ 0.207922] TOM: 0000000080000000 aka 2048M
[ 0.207987] node 0 link 0: mmio [a0000, bffff]
[ 0.207990] node 0 link 0: mmio [80000000, dfffffff]
[ 0.207992] node 0 link 0: mmio [f0000000, fe02ffff]
[ 0.207995] node 0 link 0: mmio [e0000000, e03fffff]
[ 0.207997] bus: [00, 03] on node 0 link 0
[ 0.208000] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.208002] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[ 0.208003] bus: 00 index 2 [mem 0x80000000-0xefffffff]
[ 0.208005] bus: 00 index 3 [mem 0xf0000000-0xffffffff]
[ 0.208011] ACPI: bus type pci registered
[ 0.208149] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.208227] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.208292] PCI: Using MMCONFIG for extended config space
[ 0.208357] PCI: Using configuration type 1 for base access
[ 0.208842] bio: create slab <bio-0> at 0
[ 0.210574] ACPI: EC: Look up EC in DSDT
[ 0.211181] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.214150] ACPI: Interpreter enabled
[ 0.214220] ACPI: (supports S0 S3 S4 S5)
[ 0.214501] ACPI: Using IOAPIC for interrupt routing
[ 0.225790] ACPI: No dock devices found.
[ 0.225854] HEST: Table not found.
[ 0.225919] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.226037] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.226190] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.226257] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.226324] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.226399] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
[ 0.226474] pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xffffffff]
[ 0.226562] pci 0000:00:00.0: [1002:5957] type 0 class 0x000600
[ 0.226576] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
[ 0.226609] pci 0000:00:02.0: [1002:5978] type 1 class 0x000604
[ 0.226636] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.226639] pci 0000:00:02.0: PME# disabled
[ 0.226667] pci 0000:00:0a.0: [1002:597f] type 1 class 0x000604
[ 0.226693] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 0.226696] pci 0000:00:0a.0: PME# disabled
[ 0.226723] pci 0000:00:12.0: [1002:4380] type 0 class 0x000106
[ 0.226742] pci 0000:00:12.0: reg 10: [io 0xff00-0xff07]
[ 0.226752] pci 0000:00:12.0: reg 14: [io 0xfe00-0xfe03]
[ 0.226763] pci 0000:00:12.0: reg 18: [io 0xfd00-0xfd07]
[ 0.226773] pci 0000:00:12.0: reg 1c: [io 0xfc00-0xfc03]
[ 0.226784] pci 0000:00:12.0: reg 20: [io 0xfb00-0xfb0f]
[ 0.226794] pci 0000:00:12.0: reg 24: [mem 0xfe02f000-0xfe02f3ff]
[ 0.226836] pci 0000:00:13.0: [1002:4387] type 0 class 0x000c03
[ 0.226851] pci 0000:00:13.0: reg 10: [mem 0xfe02e000-0xfe02efff]
[ 0.226919] pci 0000:00:13.1: [1002:4388] type 0 class 0x000c03
[ 0.226933] pci 0000:00:13.1: reg 10: [mem 0xfe02d000-0xfe02dfff]
[ 0.227002] pci 0000:00:13.2: [1002:4389] type 0 class 0x000c03
[ 0.227016] pci 0000:00:13.2: reg 10: [mem 0xfe02c000-0xfe02cfff]
[ 0.227084] pci 0000:00:13.3: [1002:438a] type 0 class 0x000c03
[ 0.227099] pci 0000:00:13.3: reg 10: [mem 0xfe02b000-0xfe02bfff]
[ 0.227166] pci 0000:00:13.4: [1002:438b] type 0 class 0x000c03
[ 0.227181] pci 0000:00:13.4: reg 10: [mem 0xfe02a000-0xfe02afff]
[ 0.227255] pci 0000:00:13.5: [1002:4386] type 0 class 0x000c03
[ 0.227275] pci 0000:00:13.5: reg 10: [mem 0xfe029000-0xfe0290ff]
[ 0.227351] pci 0000:00:13.5: supports D1 D2
[ 0.227352] pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot
[ 0.227357] pci 0000:00:13.5: PME# disabled
[ 0.227379] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[ 0.227402] pci 0000:00:14.0: reg 10: [io 0x0b00-0x0b0f]
[ 0.227483] pci 0000:00:14.1: [1002:438c] type 0 class 0x000101
[ 0.227497] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
[ 0.227507] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
[ 0.227518] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
[ 0.227528] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
[ 0.227538] pci 0000:00:14.1: reg 20: [io 0xf900-0xf90f]
[ 0.227577] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
[ 0.227600] pci 0000:00:14.2: reg 10: [mem 0xfe024000-0xfe027fff 64bit]
[ 0.227663] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.227667] pci 0000:00:14.2: PME# disabled
[ 0.227681] pci 0000:00:14.3: [1002:438d] type 0 class 0x000601
[ 0.227759] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[ 0.227808] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
[ 0.227823] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
[ 0.227835] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
[ 0.227848] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
[ 0.227903] pci 0000:01:00.0: [10de:0402] type 0 class 0x000300
[ 0.227914] pci 0000:01:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
[ 0.227926] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.227937] pci 0000:01:00.0: reg 1c: [mem 0xf8000000-0xf9ffffff 64bit]
[ 0.227945] pci 0000:01:00.0: reg 24: [io 0xdf00-0xdf7f]
[ 0.227953] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.233329] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 0.233396] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
[ 0.233399] pci 0000:00:02.0: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.233404] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.233444] pci 0000:02:00.0: [11ab:4364] type 0 class 0x000200
[ 0.233462] pci 0000:02:00.0: reg 10: [mem 0xfdffc000-0xfdffffff 64bit]
[ 0.233472] pci 0000:02:00.0: reg 18: [io 0xee00-0xeeff]
[ 0.233505] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.233535] pci 0000:02:00.0: supports D1 D2
[ 0.233537] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.233541] pci 0000:02:00.0: PME# disabled
[ 0.239995] pci 0000:00:0a.0: PCI bridge to [bus 02-02]
[ 0.240062] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff]
[ 0.240065] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff]
[ 0.240069] pci 0000:00:0a.0: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
[ 0.240134] pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode)
[ 0.240203] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
[ 0.240207] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.240212] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff pref]
[ 0.240214] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.240217] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.240219] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.240221] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.240224] pci 0000:00:14.4: bridge window [mem 0x80000000-0xffffffff] (subtractive decode)
[ 0.240236] pci_bus 0000:00: on NUMA node 0
[ 0.240239] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.240363] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 0.240408] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
[ 0.240440] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
[ 0.240465] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.240531] Unable to assume _OSC PCIe control. Disabling ASPM
[ 0.251996] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.252665] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.253351] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.254017] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.254684] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.255350] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.257059] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.257725] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.258446] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.258522] vgaarb: loaded
[ 0.258678] PCI: Using ACPI for IRQ routing
[ 0.258742] PCI: pci_cache_line_size set to 64 bytes
[ 0.258749] pci 0000:00:00.0: address space collision: [mem 0xe0000000-0xffffffff 64bit] conflicts with PCI Bus 0000:01 [mem 0xf8000000-0xfbffffff]
[ 0.258890] reserve RAM buffer: 000000000009f400 - 000000000009ffff
[ 0.258893] reserve RAM buffer: 000000007fff0000 - 000000007fffffff
[ 0.259004] NetLabel: Initializing
[ 0.259067] NetLabel: domain hash size = 128
[ 0.259131] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.259205] NetLabel: unlabeled traffic allowed by default
[ 0.259287] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.259608] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.261015] Switching to clocksource hpet
[ 0.261499] Switched to NOHz mode on CPU #0
[ 0.261582] Switched to NOHz mode on CPU #1
[ 0.266362] pnp: PnP ACPI init
[ 0.266443] ACPI: bus type pnp registered
[ 0.266593] pnp 00:00: [bus 00-ff]
[ 0.266598] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.266600] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.266602] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.266604] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.266606] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[ 0.266609] pnp 00:00: [mem 0x80000000-0xffffffff window]
[ 0.266662] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.266792] pnp 00:01: [io 0x4100-0x411f]
[ 0.266794] pnp 00:01: [io 0x0228-0x022f]
[ 0.266796] pnp 00:01: [io 0x040b]
[ 0.266798] pnp 00:01: [io 0x04d6]
[ 0.266799] pnp 00:01: [io 0x0c00-0x0c01]
[ 0.266801] pnp 00:01: [io 0x0c14]
[ 0.266803] pnp 00:01: [io 0x0c50-0x0c52]
[ 0.266805] pnp 00:01: [io 0x0c6c-0x0c6d]
[ 0.266807] pnp 00:01: [io 0x0c6f]
[ 0.266808] pnp 00:01: [io 0x0cd0-0x0cd1]
[ 0.266810] pnp 00:01: [io 0x0cd2-0x0cd3]
[ 0.266812] pnp 00:01: [io 0x0cd4-0x0cdf]
[ 0.266814] pnp 00:01: [io 0x4000-0x40fe]
[ 0.266815] pnp 00:01: [io 0x4210-0x4217]
[ 0.266817] pnp 00:01: [io 0x0b10-0x0b1f]
[ 0.266819] pnp 00:01: [mem 0x00000000-0x00000fff window]
[ 0.266822] pnp 00:01: [mem 0xfee00400-0xfee00fff window]
[ 0.266828] pnp 00:01: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.266939] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[ 0.267023] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:02:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[ 0.267131] system 00:01: [io 0x4100-0x411f] has been reserved
[ 0.267198] system 00:01: [io 0x0228-0x022f] has been reserved
[ 0.267264] system 00:01: [io 0x040b] has been reserved
[ 0.267330] system 00:01: [io 0x04d6] has been reserved
[ 0.267395] system 00:01: [io 0x0c00-0x0c01] has been reserved
[ 0.267461] system 00:01: [io 0x0c14] has been reserved
[ 0.267530] system 00:01: [io 0x0c50-0x0c52] has been reserved
[ 0.267596] system 00:01: [io 0x0c6c-0x0c6d] has been reserved
[ 0.267662] system 00:01: [io 0x0c6f] has been reserved
[ 0.267727] system 00:01: [io 0x0cd0-0x0cd1] has been reserved
[ 0.267793] system 00:01: [io 0x0cd2-0x0cd3] has been reserved
[ 0.267859] system 00:01: [io 0x0cd4-0x0cdf] has been reserved
[ 0.267926] system 00:01: [io 0x4000-0x40fe] has been reserved
[ 0.267992] system 00:01: [io 0x4210-0x4217] has been reserved
[ 0.268058] system 00:01: [io 0x0b10-0x0b1f] has been reserved
[ 0.268125] system 00:01: [mem 0xfee00400-0xfee00fff window] has been reserved
[ 0.268201] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.268290] pnp 00:02: [dma 4]
[ 0.268291] pnp 00:02: [io 0x0000-0x000f]
[ 0.268293] pnp 00:02: [io 0x0080-0x0090]
[ 0.268295] pnp 00:02: [io 0x0094-0x009f]
[ 0.268297] pnp 00:02: [io 0x00c0-0x00df]
[ 0.268326] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.268366] pnp 00:03: [irq 0 disabled]
[ 0.268380] pnp 00:03: [irq 8]
[ 0.268382] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 0.268408] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.268430] pnp 00:04: [io 0x0070-0x0073]
[ 0.268456] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.268463] pnp 00:05: [io 0x0061]
[ 0.268488] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.268495] pnp 00:06: [io 0x00f0-0x00ff]
[ 0.268504] pnp 00:06: [irq 13]
[ 0.268535] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.268566] pnp 00:07: [io 0x0010-0x001f]
[ 0.268567] pnp 00:07: [io 0x0022-0x003f]
[ 0.268569] pnp 00:07: [io 0x0044-0x005f]
[ 0.268571] pnp 00:07: [io 0x0062-0x0063]
[ 0.268573] pnp 00:07: [io 0x0065-0x006f]
[ 0.268575] pnp 00:07: [io 0x0074-0x007f]
[ 0.268576] pnp 00:07: [io 0x0091-0x0093]
[ 0.268578] pnp 00:07: [io 0x00a2-0x00bf]
[ 0.268580] pnp 00:07: [io 0x00e0-0x00ef]
[ 0.268582] pnp 00:07: [io 0x04d0-0x04d1]
[ 0.268632] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.268699] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.269033] pnp 00:08: [io 0x0060]
[ 0.269034] pnp 00:08: [io 0x0064]
[ 0.269043] pnp 00:08: [irq 1]
[ 0.269080] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.269127] pnp 00:09: [mem 0x000f0000-0x000fffff]
[ 0.269129] pnp 00:09: [mem 0x00000000-0x001fffff]
[ 0.269131] pnp 00:09: [mem 0xfed00000-0xfed000ff]
[ 0.269132] pnp 00:09: [mem 0x7fff0000-0x7fffffff]
[ 0.269134] pnp 00:09: [mem 0xffff0000-0xffffffff]
[ 0.269136] pnp 00:09: [mem 0x00000000-0x0009ffff]
[ 0.269138] pnp 00:09: [mem 0x00100000-0x7ffeffff]
[ 0.269140] pnp 00:09: [mem 0xfec00000-0xfec00fff]
[ 0.269142] pnp 00:09: [mem 0xfee00000-0xfee00fff]
[ 0.269144] pnp 00:09: [mem 0xfff80000-0xfffeffff]
[ 0.269148] pnp 00:09: disabling [mem 0x000f0000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.269229] pnp 00:09: disabling [mem 0x00000000-0x001fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.269309] pnp 00:09: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.269390] pnp 00:09: disabling [mem 0x00100000-0x7ffeffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.269519] system 00:09: [mem 0xfed00000-0xfed000ff] has been reserved
[ 0.269587] system 00:09: [mem 0x7fff0000-0x7fffffff] could not be reserved
[ 0.269654] system 00:09: [mem 0xffff0000-0xffffffff] has been reserved
[ 0.269721] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.269788] system 00:09: [mem 0xfee00000-0xfee00fff] could not be reserved
[ 0.269855] system 00:09: [mem 0xfff80000-0xfffeffff] has been reserved
[ 0.269922] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.269930] pnp: PnP ACPI: found 10 devices
[ 0.269994] ACPI: ACPI bus type pnp unregistered
[ 0.306168] pci 0000:01:00.0: BAR 6: assigned [mem 0xfb000000-0xfb01ffff pref]
[ 0.306245] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 0.306311] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
[ 0.306378] pci 0000:00:02.0: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.306445] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.306523] pci 0000:02:00.0: BAR 6: assigned [mem 0xfde00000-0xfde1ffff pref]
[ 0.306598] pci 0000:00:0a.0: PCI bridge to [bus 02-02]
[ 0.306664] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff]
[ 0.306741] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff]
[ 0.306809] pci 0000:00:0a.0: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
[ 0.306886] pci 0000:00:14.4: PCI bridge to [bus 03-03]
[ 0.306952] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
[ 0.307022] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.307090] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff pref]
[ 0.307175] pci 0000:00:02.0: setting latency timer to 64
[ 0.307180] pci 0000:00:0a.0: setting latency timer to 64
[ 0.307188] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.307190] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.307192] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.307194] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.307197] pci_bus 0000:00: resource 8 [mem 0x80000000-0xffffffff]
[ 0.307199] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.307201] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfbffffff]
[ 0.307203] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.307206] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.307208] pci_bus 0000:02: resource 1 [mem 0xfdf00000-0xfdffffff]
[ 0.307210] pci_bus 0000:02: resource 2 [mem 0xfde00000-0xfdefffff 64bit pref]
[ 0.307213] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
[ 0.307215] pci_bus 0000:03: resource 1 [mem 0xfdd00000-0xfddfffff]
[ 0.307217] pci_bus 0000:03: resource 2 [mem 0xfdc00000-0xfdcfffff pref]
[ 0.307219] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[ 0.307222] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[ 0.307224] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.307226] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.307228] pci_bus 0000:03: resource 8 [mem 0x80000000-0xffffffff]
[ 0.307274] NET: Registered protocol family 2
[ 0.307398] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.307694] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.308325] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.308652] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.308719] TCP reno registered
[ 0.308783] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.308856] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.309050] NET: Registered protocol family 1
[ 0.426742] pci 0000:01:00.0: Boot video device
[ 0.426749] PCI: CLS 64 bytes, default 64
[ 0.426800] Unpacking initramfs...
[ 0.460291] Freeing initrd memory: 2140k freed
[ 0.461639] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 0.461707] apm: disabled - APM is not SMP safe.
[ 0.461884] audit: initializing netlink socket (disabled)
[ 0.461957] type=2000 audit(1312207987.459:1): initialized
[ 0.462290] highmem bounce pool size: 64 pages
[ 0.462357] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.464180] VFS: Disk quotas dquot_6.5.2
[ 0.464312] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.464469] msgmni has been set to 1712
[ 0.464730] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.464841] io scheduler noop registered
[ 0.464907] io scheduler deadline registered
[ 0.464983] io scheduler cfq registered (default)
[ 0.465152] pcieport 0000:00:02.0: setting latency timer to 64
[ 0.465180] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[ 0.465225] pcieport 0000:00:0a.0: setting latency timer to 64
[ 0.465246] pcieport 0000:00:0a.0: irq 41 for MSI/MSI-X
[ 0.465393] ERST: Table is not found!
[ 0.465467] isapnp: Scanning for PnP cards...
[ 0.822554] isapnp: No Plug & Play device found
[ 0.822675] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.050031] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.050099] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.050669] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.050792] mousedev: PS/2 mouse device common for all mice
[ 1.050892] rtc_cmos 00:04: RTC can wake from S4
[ 1.074526] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.076767] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.076869] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.076954] cpuidle: using governor ladder
[ 1.077018] cpuidle: using governor menu
[ 1.077281] TCP cubic registered
[ 1.077345] NET: Registered protocol family 17
[ 1.077415] Registering the dns_resolver key type
[ 1.077492] Using IPI No-Shortcut mode
[ 1.077626] PM: Hibernation image not present or could not be loaded.
[ 1.077633] registered taskstats version 1
[ 1.077987] rtc_cmos 00:04: setting system clock to 2011-08-01 14:13:08 UTC (1312207988)
[ 1.078086] Initializing network drop monitor service
[ 1.078222] Freeing unused kernel memory: 512k freed
[ 1.078587] Write protecting the kernel text: 3380k
[ 1.078672] Write protecting the kernel read-only data: 1028k
[ 1.088713] udevd[47]: starting version 171
[ 1.180160] SCSI subsystem initialized
[ 1.197209] usbcore: registered new interface driver usbfs
[ 1.197412] usbcore: registered new interface driver hub
[ 1.197625] usbcore: registered new device driver usb
[ 1.215729] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.215840] ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 1.215930] ehci_hcd 0000:00:13.5: EHCI Host Controller
[ 1.216028] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1
[ 1.226748] ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround
[ 1.226842] ehci_hcd 0000:00:13.5: debug port 1
[ 1.226937] ehci_hcd 0000:00:13.5: irq 19, io mem 0xfe029000
[ 1.237087] libata version 3.00 loaded.
[ 1.240040] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00
[ 1.240292] hub 1-0:1.0: USB hub found
[ 1.240359] hub 1-0:1.0: 10 ports detected
[ 1.240733] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.241613] scsi0 : pata_atiixp
[ 1.241804] scsi1 : pata_atiixp
[ 1.242405] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf900 irq 14
[ 1.242472] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf908 irq 15
[ 1.244130] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.244228] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.244315] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 1.244390] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
[ 1.250091] ohci_hcd 0000:00:13.0: irq 16, io mem 0xfe02e000
[ 1.307508] hub 2-0:1.0: USB hub found
[ 1.307579] hub 2-0:1.0: 2 ports detected
[ 1.307730] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.307813] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 1.307889] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
[ 1.326729] ohci_hcd 0000:00:13.1: irq 17, io mem 0xfe02d000
[ 1.384201] hub 3-0:1.0: USB hub found
[ 1.384274] hub 3-0:1.0: 2 ports detected
[ 1.384428] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.384511] ohci_hcd 0000:00:13.2: OHCI Host Controller
[ 1.384583] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
[ 1.405209] ohci_hcd 0000:00:13.2: irq 18, io mem 0xfe02c000
[ 1.460849] hub 4-0:1.0: USB hub found
[ 1.460923] hub 4-0:1.0: 2 ports detected
[ 1.461068] ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.461149] ohci_hcd 0000:00:13.3: OHCI Host Controller
[ 1.461220] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
[ 1.480027] ohci_hcd 0000:00:13.3: irq 17, io mem 0xfe02b000
[ 1.537463] hub 5-0:1.0: USB hub found
[ 1.537533] hub 5-0:1.0: 2 ports detected
[ 1.537661] ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.537735] ohci_hcd 0000:00:13.4: OHCI Host Controller
[ 1.537805] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
[ 1.553363] ohci_hcd 0000:00:13.4: irq 18, io mem 0xfe02a000
[ 1.610820] hub 6-0:1.0: USB hub found
[ 1.610890] hub 6-0:1.0: 2 ports detected
[ 1.611025] ahci 0000:00:12.0: version 3.0
[ 1.611043] ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 1.611127] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
[ 1.611295] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 1.611377] ahci 0000:00:12.0: flags: ncq sntf ilck led clo pmp pio ccc
[ 1.612922] scsi2 : ahci
[ 1.613831] scsi3 : ahci
[ 1.614815] scsi4 : ahci
[ 1.614997] scsi5 : ahci
[ 1.615170] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
[ 1.615247] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
[ 1.615324] ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
[ 1.615400] ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
[ 1.933384] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.933527] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.063354] usb 6-2: new low speed USB device number 2 using ohci_hcd
[ 2.106684] ata3: softreset failed (device not ready)
[ 2.106751] ata3: applying SB600 PMP SRST workaround and retrying
[ 2.106831] ata4: softreset failed (device not ready)
[ 2.106897] ata4: applying SB600 PMP SRST workaround and retrying
[ 2.273373] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.273477] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.275971] ata4.00: ATAPI: HL-DT-ST DVDRAM GH20NS10, EL00, max UDMA/100
[ 2.276040] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 2.278897] ata3.00: ATA-7: SAMSUNG HD161HJ, JF100-19, max UDMA7
[ 2.278963] ata3.00: 312581808 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 2.279030] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 2.279635] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 2.279701] ata4.00: configured for UDMA/100
[ 2.284467] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 2.284533] ata3.00: configured for UDMA/133
[ 2.284747] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD161HJ JF10 PQ: 0 ANSI: 5
[ 2.397145] scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GH20NS10 EL00 PQ: 0 ANSI: 5
[ 2.407639] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 2.407755] sd 2:0:0:0: [sda] Write Protect is off
[ 2.407821] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.407838] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.411375] input: Primax Electronics Wireless Mouse as /devices/pci0000:00/0000:00:13.4/usb6/6-2/6-2:1.0/input/input1
[ 2.411568] generic-usb 0003:0461:4D25.0001: input,hiddev0,hidraw0: USB HID v1.10 Mouse [Primax Electronics Wireless Mouse] on usb-0000:00:13.4-2/input0
[ 2.411669] usbcore: registered new interface driver usbhid
[ 2.411745] usbhid: USB HID core driver
[ 2.437927] sda: sda1 sda2 sda3 < sda5 >
[ 2.438378] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.518436] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.518516] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.518787] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 2.959493] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 4.003984] udevd[255]: starting version 171
[ 4.140765] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 4.140858] ACPI: Power Button [PWRB]
[ 4.140981] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 4.141058] ACPI: Power Button [PWRF]
[ 4.154881] Linux agpgart interface v0.103
[ 4.157785] ACPI: Fan [FAN] (on)
[ 4.158635] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[ 4.161972] ACPI: acpi_idle registered with cpuidle
[ 4.162457] SP5100 TCO timer: mmio address 0xfec000f0 already in use
[ 4.228336] sky2: driver version 1.28
[ 4.228452] sky2 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 4.228527] sky2 0000:02:00.0: setting latency timer to 64
[ 4.228555] sky2 0000:02:00.0: Yukon-2 EC Ultra chip revision 5
[ 4.228709] sky2 0000:02:00.0: irq 42 for MSI/MSI-X
[ 4.228991] sky2 0000:02:00.0: eth0: addr 00:50:8d:ba:48:da
[ 4.232113] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 4.250935] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 4.302867] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 4.356767] ACPI Warning: For \_TZ_.THRM._PSL: Return Package type mismatch at index 0 - found [NULL Object Descriptor], expected Reference (20110316/nspredef-1059)
[ 4.356967] ACPI: Expecting a [Reference] package element, found type 0
[ 4.357033] ACPI: Invalid passive threshold
[ 4.363965] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 4.364111] sr 3:0:0:0: Attached scsi generic sg1 type 5
[ 4.476288] nvidia: module license 'NVIDIA' taints kernel.
[ 4.476360] Disabling lock debugging due to kernel taint
[ 4.556743] thermal LNXTHERM:00: registered as thermal_zone0
[ 4.556813] ACPI: Thermal Zone [THRM] (44 C)
[ 4.691172] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.775620] hda_codec: ALC888: BIOS auto-probing.
[ 4.777062] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input5
[ 4.781547] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
[ 5.638691] nvidia 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 5.638769] nvidia 0000:01:00.0: setting latency timer to 64
[ 5.638774] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 5.639105] NVRM: loading NVIDIA UNIX x86 Kernel Module 275.21 Mon Jul 18 14:37:03 PDT 2011
[ 5.886530] EXT4-fs (sda5): re-mounted. Opts: (null)
[ 5.965890] Adding 996024k swap on /dev/sda2. Priority:-1 extents:1 across:996024k
Last edited by Fuentes (2011-08-16 22:44:13)the contents of /home/user/.xsession-errors
startkde: Starting up...
Connecting to deprecated signal QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
kbuildsycoca4 running...
kded(920) LayoutMemoryPersister::restoreFromFile: Failed to open layout memory xml file for reading "/home/alvaro/.kde4/share/apps/kded/session/keyboard/layout_memory.xml" error: 5
kded(920)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig:
No outputs have backlight property
QDBusConnection: name 'org.kde.kglobalaccel' had owner '' but we thought it was ':1.5'
kded(920) PowerDevilUPowerBackend::brightness: org.kde.powerdevil.backlighthelper.brightness failed
Object::connect: No such signal QDBusAbstractInterface::Changed()
Invalid D-BUS member name 'idle-hint' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
Invalid D-BUS member name 'is-local' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
Invalid D-BUS member name 'x11-display-device' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
Invalid D-BUS member name 'x11-display' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
Invalid D-BUS member name 'display-device' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
Invalid D-BUS member name 'remote-host-name' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
Invalid D-BUS member name 'session-type' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
Invalid D-BUS member name 'unix-user' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
QDBusObjectPath: invalid path ""
QDBusObjectPath: invalid path ""
X Error: BadValue (integer parameter out of range for operation) 2
Major opcode: 53 (X_CreatePixmap)
Resource id: 0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 14 (X_GetGeometry)
Resource id: 0x1e00141
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 3 (X_GetWindowAttributes)
Resource id: 0x8bf31cc
QPainter::begin: Cannot paint on a null pixmap
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Extension: 152 (RENDER)
Minor opcode: 4 (RenderCreatePicture)
Resource id: 0x1e00141
X Error: BadValue (integer parameter out of range for operation) 2
Major opcode: 53 (X_CreatePixmap)
Resource id: 0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 14 (X_GetGeometry)
Resource id: 0x1e00143
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 3 (X_GetWindowAttributes)
Resource id: 0xb6d1bef4
QPainter::begin: Cannot paint on a null pixmap
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Extension: 152 (RENDER)
Minor opcode: 4 (RenderCreatePicture)
Resource id: 0x1e00143
X Error: BadValue (integer parameter out of range for operation) 2
Major opcode: 53 (X_CreatePixmap)
Resource id: 0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 14 (X_GetGeometry)
Resource id: 0x1e00145
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 3 (X_GetWindowAttributes)
Resource id: 0xb6d1bef4
QPainter::begin: Cannot paint on a null pixmap
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Extension: 152 (RENDER)
Minor opcode: 4 (RenderCreatePicture)
Resource id: 0x1e00145
X Error: BadValue (integer parameter out of range for operation) 2
Major opcode: 53 (X_CreatePixmap)
Resource id: 0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 14 (X_GetGeometry)
Resource id: 0x1e00147
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 3 (X_GetWindowAttributes)
Resource id: 0xb6d1bef4
QPainter::begin: Cannot paint on a null pixmap
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Extension: 152 (RENDER)
Minor opcode: 4 (RenderCreatePicture)
Resource id: 0x1e00147
X Error: BadValue (integer parameter out of range for operation) 2
Major opcode: 53 (X_CreatePixmap)
Resource id: 0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 14 (X_GetGeometry)
Resource id: 0x1e00149
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 3 (X_GetWindowAttributes)
Resource id: 0xb6d1bef4
QPainter::begin: Cannot paint on a null pixmap
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Extension: 152 (RENDER)
Minor opcode: 4 (RenderCreatePicture)
Resource id: 0x1e00149
X Error: BadValue (integer parameter out of range for operation) 2
Major opcode: 53 (X_CreatePixmap)
Resource id: 0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 14 (X_GetGeometry)
Resource id: 0x1e0014b
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 3 (X_GetWindowAttributes)
Resource id: 0xb6d1bef4
QPainter::begin: Cannot paint on a null pixmap
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Extension: 152 (RENDER)
Minor opcode: 4 (RenderCreatePicture)
Resource id: 0x1e0014b
X Error: BadValue (integer parameter out of range for operation) 2
Major opcode: 53 (X_CreatePixmap)
Resource id: 0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 14 (X_GetGeometry)
Resource id: 0x1e0014d
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 3 (X_GetWindowAttributes)
Resource id: 0xb6d1bef4
QPainter::begin: Cannot paint on a null pixmap
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Extension: 152 (RENDER)
Minor opcode: 4 (RenderCreatePicture)
Resource id: 0x1e0014d
X Error: BadValue (integer parameter out of range for operation) 2
Major opcode: 53 (X_CreatePixmap)
Resource id: 0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 14 (X_GetGeometry)
Resource id: 0x1e0014f
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 3 (X_GetWindowAttributes)
Resource id: 0xb6d1bef4
QPainter::begin: Cannot paint on a null pixmap
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Extension: 152 (RENDER)
Minor opcode: 4 (RenderCreatePicture)
Resource id: 0x1e0014f
Object::connect: No such signal QDBusAbstractInterface::Changed()
Object::connect: No such signal KWindowSystem::windowChanged(WId,unsigned long*)
kwin(977): Compositing is not possible
kwin(977): Compositing is not possible
kwin(977): Compositing is not possible
kded(920) PowerDevilUPowerBackend::brightness: org.kde.powerdevil.backlighthelper.brightness failed
kded(920) PowerDevilUPowerBackend::brightness: org.kde.powerdevil.backlighthelper.brightness failed
kded(920) PowerDevilUPowerBackend::setBrightness: org.kde.powerdevil.backlighthelper.setbrightness failed
kded(920) PowerDevilUPowerBackend::setBrightness: org.kde.powerdevil.backlighthelper.setbrightness failed
QProcess: Destroyed while process is still running.
plasma-desktop(1001): Communication problem with "plasma-desktop" , it probably crashed.
Error message was: "org.freedesktop.DBus.Error.Disconnected" : " "Connection was disconnected before a reply was received" "
kdeinit4: Fatal IO error: client killed
kdeinit4: sending SIGHUP to children.
klauncher: Exiting on signal 1
kglobalaccel: Fatal IO error: client killed
kdeinit4: Fatal IO error: client killed
kdeinit4: sending SIGHUP to children.
ksmserver: Fatal IO error: client killed
kdeinit4: sending SIGTERM to children.
kdeinit4: Exit.
kded4: Fatal IO error: client killed
kdeinit4: sending SIGTERM to children.
kdeinit4: Exit. -
GE620 DX, Nvidia card not working properly
Hello everyone,
Nvidia support sent me here since updating drivers didn't solve my problem.
To be honest, I'm not really computer savy... I've been sticking to consoles my entire life because it's always felt like an easy option. Because of my lack of experience I'm not the first person to notice when a computer isn't performing the way it should, therefore it has taken me a while to realize that the Nvidia Geforce GT 635M (2GB GDDR3) card has reset the settings to use the integrated graphics card instead of the Nvidia card (LOL).
Readjusting the settings doesn't work. The window will freeze for about 2-5 seconds, then refresh and the settings will be back to integrated card. Also, I downloaded new drivers from Nvidia, but the installation failed.
EDIT:
The power button is red, not blue (opening task manager does not resolve this).
Nvidia control panel isn't working. When I try to use it I get a message saying I have no monitor connected to the Nvidia GPU.Hello, i'm on laptop:
Lenovo Y580 (i7 2300Mhz, 8Gb DDR3, GF 660 2Gb DDR5, 256Gb SSD, Windows 7 / Windows 10 TH)
At first i was using default driver from windows th, but some games (styx / bioshock) won't even launch, clicking on exe file didn't do anything. Then i've updated driver:
intel - 15.33.30.64.3958
nvidia - 344.60
And now these games are working, but they are only on intel. I tried to force nvidia in several ways, but no luck. Though some other apps (3dmark06) are working on nvidia card.
And switching game to dx9 (where it possible) solves the issue. -
Nice to see 13" retina but it has only Intel HD Graphics 4000 and does not have NVIDIA GeForce GT 650M with 1GB of GDDR5 memory card. How it will affect the speed, performance and other things compared to 15" retina where NVIDIA GeForce card is available.
The 15" Retina's will have better performance than any 13" Retina. Not only do the 15" machines have dedicated GPU's, but they also have quad-core processors, whereas the 13" Retina's only have dual-core processors.
-
Do you remember the days when Apple wrote robust code ? The latest updates have not been great.
Maybe the programers are outsourced to a foriegn country now or Noobs out of school ?
It looks like someone isn't paying attention to the editing layer... I write code. and when you edit an image you store the update in another layer. The method enables you to easily undo edits. I "upgraded" to 10.9.1 and was forced to update iPhoto. After I uploaded photos from my camera I noticed redeye reduction results in just white squares over the eyes. I also noticed issues if I attempt any photo edit funcition in iPhoto.
This means to me that iPhoto 's editor is saving video from the wrong memory location.
I have a NVIDIA card because I write CUDA applications on my Mac. An NVIDIA card enables me to write CUDA and OpenCL apps.
Here's what happens if I attempt to straighten an image:
Origianal:
After Edit:
Here's what happens if I attempt to use the Redeye reduction tool:
As you can see Mavericks may have made some improvements but overall it does not get the job done as it used to.
I am willing to bet that your graphics code has devolved into ATI centric code.
I booted into macos 7.5.1 and the issue with the same hardware older operating system and apps works fine. I just wish I never deleted my 10.6.8 install. 10.6.8 was the most stable on the MacPro. Everything worked. From 10.7 up I've noticed a decline in dependability.
Can you please fix this or design a work around ? Switching over to an ATI graphics card is NOT a good answer.
Also I noticed Cinebench R15 benchmarks are higher in 7.5.1 verses 10.9.1Where in that other topic is the manufacturer of the graphic card or even a graphic card mentioned.? You may have known what kind of card you had but we're not mind readers.
Since it appears to be a incompatibility between that particular card, Mavericks and iPhoto you should keep telling Apple about it by contacting them via
http://www.apple.com/feedback/iphoto.html
http://www.apple.com/feedback/macosx.html
http://www.apple.com/feedback/macbookpro.html
http://www.apple.com/feedback/mac-pro.html
whichever is appropriate for your particular situation. It's the squeaky wheel that gets the attention.
OT -
Macbook Pro Retina - nVidia card does not work correctly
Hi,
having a MacBook Pro Retina. It ran fine till yeasterday when I fired up a game which was laggy and it was running fine before. It took me several hours to find where the problem is and it seems to me that the nVidia dicrete card is not working. But strangely not working. I installed gfxCardStatus to see whether the card is being switched to run the game and it actually is. But the performance is the same as running it on an internal Intel. I took another test and downloaded CINEBENCH to see the differences and sadly the results are the same if I switch to nVidia or to Intel and run the benchmark.
Obviously something is not right here. It happened over night. Before it worked corectly. I do not remember installing something that day/night that could have broken it (in case it is a SW problem). Only one thing comes to my mind - Apple Java update. But I tried to uninstall it and got the same result. I did try to restart several times. But otherwise there is no visible flaw, e.g. flickering or black screen when swithech do nVidia - nothing. gfxCardStatus shows that the system switches the card and I notice no change. Only in heavy load it is obvious that it is slow (slower than it was).
Is there a way to see if the nVidia card is working? I suspect that even if the system is trying to switch to a discreet card it still runs on the Intel in reality. Any way how to distinguish this rather than to rely on gfxCardStatus? Any log that would make this clear? Any test I can run (Apple HW test shows "no problem detected")?
Many thanks for hints.To show what I am talkin about I did another test. I downloaded and ran LuxMark. There it is possible to test CPU and GPU separately on a same benchmark scene. FIrst I let the system switch to nvidia and did the test:
Then I manually switched to Intel/CPU in gfxCardStatus and also selected CPU in the LuxMark and did the same test. The result is:
You see? How it is possible that in OpenCL computation CPU with internal graphic card is even faster then the descreet one? This is what I am experiencing now and cannot figure out where the problem lies.
Would the Apple HW test discover a dead nvidia card? Because nothing shows that the card is dead but as you can see it is not performing as it should. -
[SOLVED] Can't launch X server with nvidia card
I am having difficulties setting up X on my computer. Hardware is Nvidia Geforce 970 GTX. I keep getting the error:
modprobe: ERROR: could not insert 'nvidia': No such device
(EE) Fatal server error: no screens found
Here's some additional info. Help is much appreciated.
lspci:
00:00.0 Host bridge: Intel Corporation 4th Gen Core Processor DRAM Controller (rev 06)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller (rev 06)
00:14.0 USB controller: Intel Corporation 9 Series Chipset Family USB xHCI Controller
00:16.0 Communication controller: Intel Corporation 9 Series Chipset Family ME Interface #1
00:19.0 Ethernet controller: Intel Corporation Ethernet Connection (2) I218-LM
00:1a.0 USB controller: Intel Corporation 9 Series Chipset Family USB EHCI Controller #2
00:1b.0 Audio device: Intel Corporation 9 Series Chipset Family HD Audio Controller
00:1c.0 PCI bridge: Intel Corporation 9 Series Chipset Family PCI Express Root Port 1 (rev d0)
00:1c.3 PCI bridge: Intel Corporation 9 Series Chipset Family PCI Express Root Port 4 (rev d0)
00:1c.4 PCI bridge: Intel Corporation 9 Series Chipset Family PCI Express Root Port 5 (rev d0)
00:1c.6 PCI bridge: Intel Corporation 9 Series Chipset Family PCI Express Root Port 7 (rev d0)
00:1d.0 USB controller: Intel Corporation 9 Series Chipset Family USB EHCI Controller #1
00:1f.0 ISA bridge: Intel Corporation 9 Series Chipset Family Z97 LPC Controller
00:1f.2 SATA controller: Intel Corporation 9 Series Chipset Family SATA Controller [AHCI Mode]
00:1f.3 SMBus: Intel Corporation 9 Series Chipset Family SMBus Controller
01:00.0 PCI bridge: PLX Technology, Inc. PEX 8747 48-Lane, 5-Port PCI Express Gen 3 (8.0 GT/s) Switch (rev ca)
02:08.0 PCI bridge: PLX Technology, Inc. PEX 8747 48-Lane, 5-Port PCI Express Gen 3 (8.0 GT/s) Switch (rev ca)
02:10.0 PCI bridge: PLX Technology, Inc. PEX 8747 48-Lane, 5-Port PCI Express Gen 3 (8.0 GT/s) Switch (rev ca)
03:00.0 VGA compatible controller: NVIDIA Corporation GM204 [GeForce GTX 970] (rev a1)
03:00.1 Audio device: NVIDIA Corporation GM204 High Definition Audio Controller (rev a1)
06:00.0 PCI bridge: ASMedia Technology Inc. Device 1187
07:01.0 PCI bridge: ASMedia Technology Inc. Device 1187
07:02.0 PCI bridge: ASMedia Technology Inc. Device 1187
07:03.0 PCI bridge: ASMedia Technology Inc. Device 1187
07:04.0 PCI bridge: ASMedia Technology Inc. Device 1187
07:05.0 PCI bridge: ASMedia Technology Inc. Device 1187
07:06.0 PCI bridge: ASMedia Technology Inc. Device 1187
07:07.0 PCI bridge: ASMedia Technology Inc. Device 1187
0a:00.0 SATA controller: ASMedia Technology Inc. ASM1062 Serial ATA Controller (rev 02)
0d:00.0 Ethernet controller: Intel Corporation I210 Gigabit Network Connection (rev 03)
0e:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6315 Series Firewire Controller (rev 01)
0f:00.0 SATA controller: ASMedia Technology Inc. ASM1062 Serial ATA Controller (rev 02)
10:00.0 USB controller: ASMedia Technology Inc. ASM1042A USB 3.0 Host Controller
20-nvidia.conf:
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BusID "PCI:3:0:0"
Option "NoLogo" "true"
EndSection
Xorg.0.log:
[ 258.707]
X.Org X Server 1.16.3
Release Date: 2014-12-20
[ 258.707] X Protocol Version 11, Revision 0
[ 258.707] Build Operating System: Linux 3.18.1-1-ARCH x86_64
[ 258.707] Current Operating System: Linux Bastet 3.17.6-1-ARCH #1 SMP PREEMPT Sun Dec 7 23:43:32 UTC 2014 x86_64
[ 258.707] Kernel command line: initrd=\initramfs-linux.img root=/dev/sda4 rw acpi=off
[ 258.707] Build Date: 29 December 2014 01:09:58PM
[ 258.707]
[ 258.707] Current version of pixman: 0.32.6
[ 258.707] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 258.707] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 258.707] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Dec 30 00:53:53 2014
[ 258.707] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 258.707] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 258.707] (==) No Layout section. Using the first Screen section.
[ 258.707] (==) No screen section available. Using defaults.
[ 258.707] (**) |-->Screen "Default Screen Section" (0)
[ 258.707] (**) | |-->Monitor "<default monitor>"
[ 258.707] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 258.707] (**) | |-->Device "Device0"
[ 258.707] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 258.707] (==) Automatically adding devices
[ 258.707] (==) Automatically enabling devices
[ 258.707] (==) Automatically adding GPU devices
[ 258.708] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 258.708] Entry deleted from font path.
[ 258.708] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 258.708] Entry deleted from font path.
[ 258.708] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 258.708] Entry deleted from font path.
[ 258.708] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 258.708] Entry deleted from font path.
[ 258.708] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 258.708] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 258.708] Entry deleted from font path.
[ 258.708] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 258.708] (==) FontPath set to:
/usr/share/fonts/misc/
[ 258.708] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 258.708] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 258.708] (II) Loader magic: 0x818d80
[ 258.708] (II) Module ABI versions:
[ 258.708] X.Org ANSI C Emulation: 0.4
[ 258.708] X.Org Video Driver: 18.0
[ 258.708] X.Org XInput driver : 21.0
[ 258.708] X.Org Server Extension : 8.0
[ 258.708] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[ 258.709] (--) PCI:*(0:3:0:0) 10de:13c2:1043:8508 rev 161, Mem @ 0xde000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 258.709] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 258.709] (II) LoadModule: "glx"
[ 258.709] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 258.714] (II) Module glx: vendor="NVIDIA Corporation"
[ 258.714] compiled for 4.0.2, module version = 1.0.0
[ 258.714] Module class: X.Org Server Extension
[ 258.714] (II) NVIDIA GLX Module 343.36 Mon Dec 1 15:50:02 PST 2014
[ 258.714] (II) LoadModule: "nvidia"
[ 258.714] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 258.714] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 258.714] compiled for 4.0.2, module version = 1.0.0
[ 258.714] Module class: X.Org Video Driver
[ 258.714] (II) NVIDIA dlloader X Driver 343.36 Mon Dec 1 15:28:39 PST 2014
[ 258.714] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 258.714] (++) using VT number 1
[ 258.714] (--) controlling tty is VT number 1, auto-enabling KeepTty
[ 258.714] (II) Loading sub module "fb"
[ 258.714] (II) LoadModule: "fb"
[ 258.714] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 258.714] (II) Module fb: vendor="X.Org Foundation"
[ 258.714] compiled for 1.16.3, module version = 1.0.0
[ 258.714] ABI class: X.Org ANSI C Emulation, version 0.4
[ 258.714] (II) Loading sub module "wfb"
[ 258.714] (II) LoadModule: "wfb"
[ 258.714] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 258.715] (II) Module wfb: vendor="X.Org Foundation"
[ 258.715] compiled for 1.16.3, module version = 1.0.0
[ 258.715] ABI class: X.Org ANSI C Emulation, version 0.4
[ 258.715] (II) Loading sub module "ramdac"
[ 258.715] (II) LoadModule: "ramdac"
[ 258.715] (II) Module "ramdac" already built-in
[ 258.779] (EE) NVIDIA: Failed to initialize the NVIDIA kernel module. Please see the
[ 258.779] (EE) NVIDIA: system's kernel log for additional error messages and
[ 258.779] (EE) NVIDIA: consult the NVIDIA README for details.
[ 258.779] (EE) No devices detected.
[ 258.779] (EE)
Fatal server error:
[ 258.779] (EE) no screens found(EE)
[ 258.779] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 258.779] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 258.779] (EE)
Last edited by Nepherte (2014-12-30 10:05:05)dmesg (check the last messages):
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.17.6-1-ARCH (builduser@foutrelis) (gcc version 4.9.2 (GCC) ) #1 SMP PREEMPT Sun Dec 7 23:43:32 UTC 2014
[ 0.000000] Command line: initrd=\initramfs-linux.img root=/dev/sda4 rw acpi=off pci=biosirq
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000001000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000008ffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000090000-0x0000000000090fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000091000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009e51ffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009e520000-0x000000009e526fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009e527000-0x000000009e984fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009e985000-0x000000009edeffff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009edf0000-0x00000000bd921fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bd922000-0x00000000bdc8efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bdc8f000-0x00000000bdcaffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bdcb0000-0x00000000be1d8fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000be1d9000-0x00000000beffefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000befff000-0x00000000beffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000043effffff] usable
[ 0.000000] PCI: Unknown option `biosirq'
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820: update [mem 0x9c598018-0x9c5b9a57] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000000fff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000001000-0x0000000000057fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000008ffff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000000090000-0x0000000000090fff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000091000-0x000000000009dfff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000009e000-0x000000000009ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000009c598017] usable
[ 0.000000] reserve setup_data: [mem 0x000000009c598018-0x000000009c5b9a57] usable
[ 0.000000] reserve setup_data: [mem 0x000000009c5b9a58-0x000000009e51ffff] usable
[ 0.000000] reserve setup_data: [mem 0x000000009e520000-0x000000009e526fff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x000000009e527000-0x000000009e984fff] usable
[ 0.000000] reserve setup_data: [mem 0x000000009e985000-0x000000009edeffff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000009edf0000-0x00000000bd921fff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000bd922000-0x00000000bdc8efff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000bdc8f000-0x00000000bdcaffff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x00000000bdcb0000-0x00000000be1d8fff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x00000000be1d9000-0x00000000beffefff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000befff000-0x00000000beffffff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000043effffff] usable
[ 0.000000] efi: EFI v2.31 by American Megatrends
[ 0.000000] efi: ACPI 2.0=0xbdc95000 ACPI=0xbdc95000 SMBIOS=0xbef4e498
[ 0.000000] efi: mem00: type=6, attr=0x800000000000000f, range=[0x0000000000000000-0x0000000000001000) (0MB)
[ 0.000000] efi: mem01: type=2, attr=0xf, range=[0x0000000000001000-0x0000000000007000) (0MB)
[ 0.000000] efi: mem02: type=7, attr=0xf, range=[0x0000000000007000-0x0000000000058000) (0MB)
[ 0.000000] efi: mem03: type=0, attr=0xf, range=[0x0000000000058000-0x0000000000059000) (0MB)
[ 0.000000] efi: mem04: type=7, attr=0xf, range=[0x0000000000059000-0x0000000000090000) (0MB)
[ 0.000000] efi: mem05: type=5, attr=0x800000000000000f, range=[0x0000000000090000-0x0000000000091000) (0MB)
[ 0.000000] efi: mem06: type=7, attr=0xf, range=[0x0000000000091000-0x000000000009e000) (0MB)
[ 0.000000] efi: mem07: type=0, attr=0xf, range=[0x000000000009e000-0x00000000000a0000) (0MB)
[ 0.000000] efi: mem08: type=7, attr=0xf, range=[0x0000000000100000-0x0000000001000000) (15MB)
[ 0.000000] efi: mem09: type=2, attr=0xf, range=[0x0000000001000000-0x0000000001f4f000) (15MB)
[ 0.000000] efi: mem10: type=7, attr=0xf, range=[0x0000000001f4f000-0x000000007fcb9000) (2013MB)
[ 0.000000] efi: mem11: type=2, attr=0xf, range=[0x000000007fcb9000-0x0000000080000000) (3MB)
[ 0.000000] efi: mem12: type=7, attr=0xf, range=[0x0000000080000000-0x000000009ae13000) (430MB)
[ 0.000000] efi: mem13: type=2, attr=0xf, range=[0x000000009ae13000-0x000000009af13000) (1MB)
[ 0.000000] efi: mem14: type=7, attr=0xf, range=[0x000000009af13000-0x000000009c598000) (22MB)
[ 0.000000] efi: mem15: type=2, attr=0xf, range=[0x000000009c598000-0x000000009c5ba000) (0MB)
[ 0.000000] efi: mem16: type=1, attr=0xf, range=[0x000000009c5ba000-0x000000009e520000) (31MB)
[ 0.000000] efi: mem17: type=10, attr=0xf, range=[0x000000009e520000-0x000000009e527000) (0MB)
[ 0.000000] efi: mem18: type=4, attr=0xf, range=[0x000000009e527000-0x000000009e688000) (1MB)
[ 0.000000] efi: mem19: type=3, attr=0xf, range=[0x000000009e688000-0x000000009e94a000) (2MB)
[ 0.000000] efi: mem20: type=4, attr=0xf, range=[0x000000009e94a000-0x000000009e94f000) (0MB)
[ 0.000000] efi: mem21: type=3, attr=0xf, range=[0x000000009e94f000-0x000000009e953000) (0MB)
[ 0.000000] efi: mem22: type=4, attr=0xf, range=[0x000000009e953000-0x000000009e968000) (0MB)
[ 0.000000] efi: mem23: type=3, attr=0xf, range=[0x000000009e968000-0x000000009e97a000) (0MB)
[ 0.000000] efi: mem24: type=4, attr=0xf, range=[0x000000009e97a000-0x000000009e985000) (0MB)
[ 0.000000] efi: mem25: type=6, attr=0x800000000000000f, range=[0x000000009e985000-0x000000009edf0000) (4MB)
[ 0.000000] efi: mem26: type=4, attr=0xf, range=[0x000000009edf0000-0x000000009ee03000) (0MB)
[ 0.000000] efi: mem27: type=7, attr=0xf, range=[0x000000009ee03000-0x000000009ee07000) (0MB)
[ 0.000000] efi: mem28: type=2, attr=0xf, range=[0x000000009ee07000-0x000000009ee12000) (0MB)
[ 0.000000] efi: mem29: type=7, attr=0xf, range=[0x000000009ee12000-0x00000000b903e000) (418MB)
[ 0.000000] efi: mem30: type=4, attr=0xf, range=[0x00000000b903e000-0x00000000b919d000) (1MB)
[ 0.000000] efi: mem31: type=7, attr=0xf, range=[0x00000000b919d000-0x00000000b91ab000) (0MB)
[ 0.000000] efi: mem32: type=4, attr=0xf, range=[0x00000000b91ab000-0x00000000b91c7000) (0MB)
[ 0.000000] efi: mem33: type=7, attr=0xf, range=[0x00000000b91c7000-0x00000000b91ce000) (0MB)
[ 0.000000] efi: mem34: type=4, attr=0xf, range=[0x00000000b91ce000-0x00000000b91fe000) (0MB)
[ 0.000000] efi: mem35: type=7, attr=0xf, range=[0x00000000b91fe000-0x00000000b9211000) (0MB)
[ 0.000000] efi: mem36: type=4, attr=0xf, range=[0x00000000b9211000-0x00000000b9292000) (0MB)
[ 0.000000] efi: mem37: type=7, attr=0xf, range=[0x00000000b9292000-0x00000000b92b7000) (0MB)
[ 0.000000] efi: mem38: type=4, attr=0xf, range=[0x00000000b92b7000-0x00000000b92d3000) (0MB)
[ 0.000000] efi: mem39: type=7, attr=0xf, range=[0x00000000b92d3000-0x00000000b92e0000) (0MB)
[ 0.000000] efi: mem40: type=4, attr=0xf, range=[0x00000000b92e0000-0x00000000b9315000) (0MB)
[ 0.000000] efi: mem41: type=7, attr=0xf, range=[0x00000000b9315000-0x00000000b9330000) (0MB)
[ 0.000000] efi: mem42: type=4, attr=0xf, range=[0x00000000b9330000-0x00000000b9375000) (0MB)
[ 0.000000] efi: mem43: type=7, attr=0xf, range=[0x00000000b9375000-0x00000000b9398000) (0MB)
[ 0.000000] efi: mem44: type=4, attr=0xf, range=[0x00000000b9398000-0x00000000b93cd000) (0MB)
[ 0.000000] efi: mem45: type=7, attr=0xf, range=[0x00000000b93cd000-0x00000000b93ea000) (0MB)
[ 0.000000] efi: mem46: type=4, attr=0xf, range=[0x00000000b93ea000-0x00000000b93f0000) (0MB)
[ 0.000000] efi: mem47: type=7, attr=0xf, range=[0x00000000b93f0000-0x00000000b9408000) (0MB)
[ 0.000000] efi: mem48: type=4, attr=0xf, range=[0x00000000b9408000-0x00000000b9455000) (0MB)
[ 0.000000] efi: mem49: type=7, attr=0xf, range=[0x00000000b9455000-0x00000000b947d000) (0MB)
[ 0.000000] efi: mem50: type=4, attr=0xf, range=[0x00000000b947d000-0x00000000b951b000) (0MB)
[ 0.000000] efi: mem51: type=7, attr=0xf, range=[0x00000000b951b000-0x00000000b9529000) (0MB)
[ 0.000000] efi: mem52: type=4, attr=0xf, range=[0x00000000b9529000-0x00000000b9545000) (0MB)
[ 0.000000] efi: mem53: type=7, attr=0xf, range=[0x00000000b9545000-0x00000000b954c000) (0MB)
[ 0.000000] efi: mem54: type=4, attr=0xf, range=[0x00000000b954c000-0x00000000b957a000) (0MB)
[ 0.000000] efi: mem55: type=7, attr=0xf, range=[0x00000000b957a000-0x00000000b958d000) (0MB)
[ 0.000000] efi: mem56: type=4, attr=0xf, range=[0x00000000b958d000-0x00000000b960f000) (0MB)
[ 0.000000] efi: mem57: type=7, attr=0xf, range=[0x00000000b960f000-0x00000000b9634000) (0MB)
[ 0.000000] efi: mem58: type=4, attr=0xf, range=[0x00000000b9634000-0x00000000b9651000) (0MB)
[ 0.000000] efi: mem59: type=7, attr=0xf, range=[0x00000000b9651000-0x00000000b965e000) (0MB)
[ 0.000000] efi: mem60: type=4, attr=0xf, range=[0x00000000b965e000-0x00000000b9692000) (0MB)
[ 0.000000] efi: mem61: type=7, attr=0xf, range=[0x00000000b9692000-0x00000000b96ad000) (0MB)
[ 0.000000] efi: mem62: type=4, attr=0xf, range=[0x00000000b96ad000-0x00000000b96f2000) (0MB)
[ 0.000000] efi: mem63: type=7, attr=0xf, range=[0x00000000b96f2000-0x00000000b9715000) (0MB)
[ 0.000000] efi: mem64: type=4, attr=0xf, range=[0x00000000b9715000-0x00000000b974c000) (0MB)
[ 0.000000] efi: mem65: type=7, attr=0xf, range=[0x00000000b974c000-0x00000000b9769000) (0MB)
[ 0.000000] efi: mem66: type=4, attr=0xf, range=[0x00000000b9769000-0x00000000b981e000) (0MB)
[ 0.000000] efi: mem67: type=7, attr=0xf, range=[0x00000000b981e000-0x00000000b986b000) (0MB)
[ 0.000000] efi: mem68: type=4, attr=0xf, range=[0x00000000b986b000-0x00000000b9898000) (0MB)
[ 0.000000] efi: mem69: type=7, attr=0xf, range=[0x00000000b9898000-0x00000000b98a6000) (0MB)
[ 0.000000] efi: mem70: type=4, attr=0xf, range=[0x00000000b98a6000-0x00000000b98c1000) (0MB)
[ 0.000000] efi: mem71: type=7, attr=0xf, range=[0x00000000b98c1000-0x00000000b98c8000) (0MB)
[ 0.000000] efi: mem72: type=4, attr=0xf, range=[0x00000000b98c8000-0x00000000b998d000) (0MB)
[ 0.000000] efi: mem73: type=7, attr=0xf, range=[0x00000000b998d000-0x00000000b999f000) (0MB)
[ 0.000000] efi: mem74: type=4, attr=0xf, range=[0x00000000b999f000-0x00000000b99d0000) (0MB)
[ 0.000000] efi: mem75: type=7, attr=0xf, range=[0x00000000b99d0000-0x00000000b99d5000) (0MB)
[ 0.000000] efi: mem76: type=4, attr=0xf, range=[0x00000000b99d5000-0x00000000b9a0f000) (0MB)
[ 0.000000] efi: mem77: type=7, attr=0xf, range=[0x00000000b9a0f000-0x00000000b9a17000) (0MB)
[ 0.000000] efi: mem78: type=4, attr=0xf, range=[0x00000000b9a17000-0x00000000b9ac9000) (0MB)
[ 0.000000] efi: mem79: type=7, attr=0xf, range=[0x00000000b9ac9000-0x00000000b9ad3000) (0MB)
[ 0.000000] efi: mem80: type=4, attr=0xf, range=[0x00000000b9ad3000-0x00000000b9c16000) (1MB)
[ 0.000000] efi: mem81: type=7, attr=0xf, range=[0x00000000b9c16000-0x00000000b9c24000) (0MB)
[ 0.000000] efi: mem82: type=4, attr=0xf, range=[0x00000000b9c24000-0x00000000b9c40000) (0MB)
[ 0.000000] efi: mem83: type=7, attr=0xf, range=[0x00000000b9c40000-0x00000000b9c47000) (0MB)
[ 0.000000] efi: mem84: type=4, attr=0xf, range=[0x00000000b9c47000-0x00000000b9c77000) (0MB)
[ 0.000000] efi: mem85: type=7, attr=0xf, range=[0x00000000b9c77000-0x00000000b9c7c000) (0MB)
[ 0.000000] efi: mem86: type=4, attr=0xf, range=[0x00000000b9c7c000-0x00000000b9d4e000) (0MB)
[ 0.000000] efi: mem87: type=7, attr=0xf, range=[0x00000000b9d4e000-0x00000000b9d5b000) (0MB)
[ 0.000000] efi: mem88: type=4, attr=0xf, range=[0x00000000b9d5b000-0x00000000b9d8d000) (0MB)
[ 0.000000] efi: mem89: type=7, attr=0xf, range=[0x00000000b9d8d000-0x00000000b9d95000) (0MB)
[ 0.000000] efi: mem90: type=4, attr=0xf, range=[0x00000000b9d95000-0x00000000b9fc0000) (2MB)
[ 0.000000] efi: mem91: type=7, attr=0xf, range=[0x00000000b9fc0000-0x00000000b9fc7000) (0MB)
[ 0.000000] efi: mem92: type=4, attr=0xf, range=[0x00000000b9fc7000-0x00000000ba0cd000) (1MB)
[ 0.000000] efi: mem93: type=7, attr=0xf, range=[0x00000000ba0cd000-0x00000000ba0da000) (0MB)
[ 0.000000] efi: mem94: type=4, attr=0xf, range=[0x00000000ba0da000-0x00000000ba288000) (1MB)
[ 0.000000] efi: mem95: type=7, attr=0xf, range=[0x00000000ba288000-0x00000000ba293000) (0MB)
[ 0.000000] efi: mem96: type=4, attr=0xf, range=[0x00000000ba293000-0x00000000ba341000) (0MB)
[ 0.000000] efi: mem97: type=7, attr=0xf, range=[0x00000000ba341000-0x00000000ba348000) (0MB)
[ 0.000000] efi: mem98: type=4, attr=0xf, range=[0x00000000ba348000-0x00000000ba40c000) (0MB)
[ 0.000000] efi: mem99: type=7, attr=0xf, range=[0x00000000ba40c000-0x00000000ba416000) (0MB)
[ 0.000000] efi: mem100: type=4, attr=0xf, range=[0x00000000ba416000-0x00000000ba44f000) (0MB)
[ 0.000000] efi: mem101: type=7, attr=0xf, range=[0x00000000ba44f000-0x00000000ba45c000) (0MB)
[ 0.000000] efi: mem102: type=4, attr=0xf, range=[0x00000000ba45c000-0x00000000ba821000) (3MB)
[ 0.000000] efi: mem103: type=7, attr=0xf, range=[0x00000000ba821000-0x00000000ba822000) (0MB)
[ 0.000000] efi: mem104: type=4, attr=0xf, range=[0x00000000ba822000-0x00000000ba8da000) (0MB)
[ 0.000000] efi: mem105: type=7, attr=0xf, range=[0x00000000ba8da000-0x00000000ba8dc000) (0MB)
[ 0.000000] efi: mem106: type=4, attr=0xf, range=[0x00000000ba8dc000-0x00000000baa8c000) (1MB)
[ 0.000000] efi: mem107: type=7, attr=0xf, range=[0x00000000baa8c000-0x00000000baa91000) (0MB)
[ 0.000000] efi: mem108: type=4, attr=0xf, range=[0x00000000baa91000-0x00000000bab22000) (0MB)
[ 0.000000] efi: mem109: type=7, attr=0xf, range=[0x00000000bab22000-0x00000000bab23000) (0MB)
[ 0.000000] efi: mem110: type=4, attr=0xf, range=[0x00000000bab23000-0x00000000baba2000) (0MB)
[ 0.000000] efi: mem111: type=7, attr=0xf, range=[0x00000000baba2000-0x00000000baba3000) (0MB)
[ 0.000000] efi: mem112: type=4, attr=0xf, range=[0x00000000baba3000-0x00000000bac04000) (0MB)
[ 0.000000] efi: mem113: type=7, attr=0xf, range=[0x00000000bac04000-0x00000000bac07000) (0MB)
[ 0.000000] efi: mem114: type=4, attr=0xf, range=[0x00000000bac07000-0x00000000bac5c000) (0MB)
[ 0.000000] efi: mem115: type=7, attr=0xf, range=[0x00000000bac5c000-0x00000000bac5e000) (0MB)
[ 0.000000] efi: mem116: type=4, attr=0xf, range=[0x00000000bac5e000-0x00000000baef6000) (2MB)
[ 0.000000] efi: mem117: type=7, attr=0xf, range=[0x00000000baef6000-0x00000000baf04000) (0MB)
[ 0.000000] efi: mem118: type=4, attr=0xf, range=[0x00000000baf04000-0x00000000baf2a000) (0MB)
[ 0.000000] efi: mem119: type=7, attr=0xf, range=[0x00000000baf2a000-0x00000000baf30000) (0MB)
[ 0.000000] efi: mem120: type=4, attr=0xf, range=[0x00000000baf30000-0x00000000baf4a000) (0MB)
[ 0.000000] efi: mem121: type=7, attr=0xf, range=[0x00000000baf4a000-0x00000000baf4f000) (0MB)
[ 0.000000] efi: mem122: type=4, attr=0xf, range=[0x00000000baf4f000-0x00000000bb3e4000) (4MB)
[ 0.000000] efi: mem123: type=7, attr=0xf, range=[0x00000000bb3e4000-0x00000000bb3e6000) (0MB)
[ 0.000000] efi: mem124: type=4, attr=0xf, range=[0x00000000bb3e6000-0x00000000bb3ed000) (0MB)
[ 0.000000] efi: mem125: type=7, attr=0xf, range=[0x00000000bb3ed000-0x00000000bb3ef000) (0MB)
[ 0.000000] efi: mem126: type=4, attr=0xf, range=[0x00000000bb3ef000-0x00000000bb3f5000) (0MB)
[ 0.000000] efi: mem127: type=7, attr=0xf, range=[0x00000000bb3f5000-0x00000000bb3f8000) (0MB)
[ 0.000000] efi: mem128: type=4, attr=0xf, range=[0x00000000bb3f8000-0x00000000bb40c000) (0MB)
[ 0.000000] efi: mem129: type=7, attr=0xf, range=[0x00000000bb40c000-0x00000000bb410000) (0MB)
[ 0.000000] efi: mem130: type=4, attr=0xf, range=[0x00000000bb410000-0x00000000bb445000) (0MB)
[ 0.000000] efi: mem131: type=7, attr=0xf, range=[0x00000000bb445000-0x00000000bb448000) (0MB)
[ 0.000000] efi: mem132: type=4, attr=0xf, range=[0x00000000bb448000-0x00000000bb462000) (0MB)
[ 0.000000] efi: mem133: type=7, attr=0xf, range=[0x00000000bb462000-0x00000000bb464000) (0MB)
[ 0.000000] efi: mem134: type=4, attr=0xf, range=[0x00000000bb464000-0x00000000bb469000) (0MB)
[ 0.000000] efi: mem135: type=7, attr=0xf, range=[0x00000000bb469000-0x00000000bb46b000) (0MB)
[ 0.000000] efi: mem136: type=4, attr=0xf, range=[0x00000000bb46b000-0x00000000bb473000) (0MB)
[ 0.000000] efi: mem137: type=7, attr=0xf, range=[0x00000000bb473000-0x00000000bb474000) (0MB)
[ 0.000000] efi: mem138: type=4, attr=0xf, range=[0x00000000bb474000-0x00000000bb489000) (0MB)
[ 0.000000] efi: mem139: type=7, attr=0xf, range=[0x00000000bb489000-0x00000000bb48a000) (0MB)
[ 0.000000] efi: mem140: type=4, attr=0xf, range=[0x00000000bb48a000-0x00000000bcf39000) (26MB)
[ 0.000000] efi: mem141: type=7, attr=0xf, range=[0x00000000bcf39000-0x00000000bd015000) (0MB)
[ 0.000000] efi: mem142: type=3, attr=0xf, range=[0x00000000bd015000-0x00000000bd922000) (9MB)
[ 0.000000] efi: mem143: type=0, attr=0xf, range=[0x00000000bd922000-0x00000000bd9e4000) (0MB)
[ 0.000000] efi: mem144: type=0, attr=0xf, range=[0x00000000bd9e4000-0x00000000bdc8f000) (2MB)
[ 0.000000] efi: mem145: type=9, attr=0xf, range=[0x00000000bdc8f000-0x00000000bdc95000) (0MB)
[ 0.000000] efi: mem146: type=9, attr=0xf, range=[0x00000000bdc95000-0x00000000bdcb0000) (0MB)
[ 0.000000] efi: mem147: type=10, attr=0xf, range=[0x00000000bdcb0000-0x00000000bddb8000) (1MB)
[ 0.000000] efi: mem148: type=10, attr=0xf, range=[0x00000000bddb8000-0x00000000be1d9000) (4MB)
[ 0.000000] efi: mem149: type=6, attr=0x800000000000000f, range=[0x00000000be1d9000-0x00000000be488000) (2MB)
[ 0.000000] efi: mem150: type=6, attr=0x800000000000000f, range=[0x00000000be488000-0x00000000beeaf000) (10MB)
[ 0.000000] efi: mem151: type=6, attr=0x800000000000000f, range=[0x00000000beeaf000-0x00000000beeb2000) (0MB)
[ 0.000000] efi: mem152: type=6, attr=0x800000000000000f, range=[0x00000000beeb2000-0x00000000bef50000) (0MB)
[ 0.000000] efi: mem153: type=5, attr=0x800000000000000f, range=[0x00000000bef50000-0x00000000bef74000) (0MB)
[ 0.000000] efi: mem154: type=5, attr=0x800000000000000f, range=[0x00000000bef74000-0x00000000befff000) (0MB)
[ 0.000000] efi: mem155: type=4, attr=0xf, range=[0x00000000befff000-0x00000000bf000000) (0MB)
[ 0.000000] efi: mem156: type=7, attr=0xf, range=[0x0000000100000000-0x000000043f000000) (13296MB)
[ 0.000000] efi: mem157: type=11, attr=0x8000000000000001, range=[0x00000000e0000000-0x00000000f0000000) (256MB)
[ 0.000000] efi: mem158: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
[ 0.000000] efi: mem159: type=11, attr=0x8000000000000001, range=[0x00000000fed00000-0x00000000fed04000) (0MB)
[ 0.000000] efi: mem160: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
[ 0.000000] efi: mem161: type=11, attr=0x8000000000000001, range=[0x00000000fee00000-0x00000000fee01000) (0MB)
[ 0.000000] efi: mem162: type=11, attr=0x8000000000000001, range=[0x00000000ff000000-0x0000000100000000) (16MB)
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: ASUS All Series/Z97-WS, BIOS 1204 07/07/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x43f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7C00000000 write-back
[ 0.000000] 1 base 0400000000 mask 7FE0000000 write-back
[ 0.000000] 2 base 0420000000 mask 7FF0000000 write-back
[ 0.000000] 3 base 0430000000 mask 7FF8000000 write-back
[ 0.000000] 4 base 0438000000 mask 7FFC000000 write-back
[ 0.000000] 5 base 043C000000 mask 7FFE000000 write-back
[ 0.000000] 6 base 043E000000 mask 7FFF000000 write-back
[ 0.000000] 7 base 00C0000000 mask 7FC0000000 uncachable
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xbf000 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b2b000, 0x01b2bfff] PGTABLE
[ 0.000000] BRK [0x01b2c000, 0x01b2cfff] PGTABLE
[ 0.000000] BRK [0x01b2d000, 0x01b2dfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x43ee00000-0x43effffff]
[ 0.000000] [mem 0x43ee00000-0x43effffff] page 2M
[ 0.000000] BRK [0x01b2e000, 0x01b2efff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x43c000000-0x43edfffff]
[ 0.000000] [mem 0x43c000000-0x43edfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x400000000-0x43bffffff]
[ 0.000000] [mem 0x400000000-0x43bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x9e51ffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
[ 0.000000] [mem 0x80000000-0x9e3fffff] page 2M
[ 0.000000] [mem 0x9e400000-0x9e51ffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x9e527000-0x9e984fff]
[ 0.000000] [mem 0x9e527000-0x9e5fffff] page 4k
[ 0.000000] [mem 0x9e600000-0x9e7fffff] page 2M
[ 0.000000] [mem 0x9e800000-0x9e984fff] page 4k
[ 0.000000] BRK [0x01b2f000, 0x01b2ffff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x9edf0000-0xbd921fff]
[ 0.000000] [mem 0x9edf0000-0x9edfffff] page 4k
[ 0.000000] [mem 0x9ee00000-0xbd7fffff] page 2M
[ 0.000000] [mem 0xbd800000-0xbd921fff] page 4k
[ 0.000000] BRK [0x01b30000, 0x01b30fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xbefff000-0xbeffffff]
[ 0.000000] [mem 0xbefff000-0xbeffffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff]
[ 0.000000] [mem 0x100000000-0x3ffffffff] page 1G
[ 0.000000] RAMDISK: [mem 0x7fcb9000-0x7fffffff]
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000043effffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x43effffff]
[ 0.000000] NODE_DATA [mem 0x43eff8000-0x43effbfff]
[ 0.000000] [ffffea0000000000-ffffea0010ffffff] PMD -> [ffff88042e600000-ffff88043e5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x43effffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x00057fff]
[ 0.000000] node 0: [mem 0x00059000-0x0008ffff]
[ 0.000000] node 0: [mem 0x00091000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0x9e51ffff]
[ 0.000000] node 0: [mem 0x9e527000-0x9e984fff]
[ 0.000000] node 0: [mem 0x9edf0000-0xbd921fff]
[ 0.000000] node 0: [mem 0xbefff000-0xbeffffff]
[ 0.000000] node 0: [mem 0x100000000-0x43effffff]
[ 0.000000] On node 0 totalpages: 4179020
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3995 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12051 pages used for memmap
[ 0.000000] DMA32 zone: 771249 pages, LIFO batch:31
[ 0.000000] Normal zone: 53184 pages used for memmap
[ 0.000000] Normal zone: 3403776 pages, LIFO batch:31
[ 0.000000] SFI: Simple Firmware Interface v0.81 http://simplefirmware.org
[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00090000-0x00090fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9c598000-0x9c598fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9c5b9000-0x9c5b9fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9e520000-0x9e526fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9e985000-0x9edeffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbd922000-0xbdc8efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbdc8f000-0xbdcaffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbdcb0000-0xbe1d8fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbe1d9000-0xbeffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf000000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xbf000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88043ec00000 s82752 r8192 d23744 u2097152
[ 0.000000] pcpu-alloc: s82752 r8192 d23744 u2097152 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4113700
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: initrd=\initramfs-linux.img root=/dev/sda4 rw acpi=off pci=biosirq
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 16297060K/16716080K available (5386K kernel code, 897K rwdata, 1712K rodata, 1136K init, 1176K bss, 419020K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=1.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[ 0.000000] NR_IRQS:8448 nr_irqs:24 0
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 67108864 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3598.042 MHz processor
[ 0.000019] Calibrating delay loop (skipped), value calculated using timer frequency.. 7198.92 BogoMIPS (lpj=11993473)
[ 0.000021] pid_max: default: 32768 minimum: 301
[ 0.001187] Security Framework initialized
[ 0.001191] Yama: becoming mindful.
[ 0.001802] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.003720] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.004536] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.004547] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.004689] Initializing cgroup subsys memory
[ 0.004693] Initializing cgroup subsys devices
[ 0.004694] Initializing cgroup subsys freezer
[ 0.004695] Initializing cgroup subsys net_cls
[ 0.004696] Initializing cgroup subsys blkio
[ 0.004710] CPU: Physical Processor ID: 0
[ 0.004711] CPU: Processor Core ID: 0
[ 0.004713] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.005425] mce: CPU supports 9 MCE banks
[ 0.005435] CPU0: Thermal monitoring enabled (TM1)
[ 0.005443] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.007800] Freeing SMP alternatives memory: 20K (ffffffff819fe000 - ffffffff81a03000)
[ 0.009280] ftrace: allocating 20687 entries in 81 pages
[ 0.014722] smpboot: weird, boot CPU (#0) not listed by the BIOS
[ 0.014723] smpboot: SMP motherboard not detected
[ 0.014743] TSC deadline timer enabled
[ 0.014744] smpboot: SMP disabled
[ 0.014756] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
[ 0.014768] ... version: 3
[ 0.014769] ... bit width: 48
[ 0.014769] ... generic registers: 4
[ 0.014770] ... value mask: 0000ffffffffffff
[ 0.014770] ... max period: 0000ffffffffffff
[ 0.014771] ... fixed-purpose events: 3
[ 0.014771] ... event mask: 000000070000000f
[ 0.031484] x86: Booted up 1 node, 1 CPUs
[ 0.031486] smpboot: Total of 1 processors activated (7198.92 BogoMIPS)
[ 0.031509] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.031540] devtmpfs: initialized
[ 0.033214] PM: Registering ACPI NVS region [mem 0x9e520000-0x9e526fff] (28672 bytes)
[ 0.033215] PM: Registering ACPI NVS region [mem 0xbdcb0000-0xbe1d8fff] (5410816 bytes)
[ 0.033692] pinctrl core: initialized pinctrl subsystem
[ 0.033718] RTC time: 1:46:17, date: 12/30/14
[ 0.033767] NET: Registered protocol family 16
[ 0.033828] cpuidle: using governor ladder
[ 0.033830] cpuidle: using governor menu
[ 0.033891] PCI: Using configuration type 1 for base access
[ 0.045003] ACPI: Interpreter disabled.
[ 0.045040] vgaarb: loaded
[ 0.045084] PCI: Probing PCI hardware
[ 0.045085] PCI: root bus 00: using default resources
[ 0.045085] PCI: Probing PCI hardware (bus 00)
[ 0.045098] PCI host bridge to bus 0000:00
[ 0.045099] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.045100] pci_bus 0000:00: root bus resource [mem 0x00000000-0x7fffffffff]
[ 0.045101] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 0.045106] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
[ 0.045142] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
[ 0.045163] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.045208] pci 0000:00:14.0: [8086:8cb1] type 00 class 0x0c0330
[ 0.045223] pci 0000:00:14.0: reg 0x10: [mem 0xdf720000-0xdf72ffff 64bit]
[ 0.045269] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.045297] pci 0000:00:16.0: [8086:8cba] type 00 class 0x078000
[ 0.045312] pci 0000:00:16.0: reg 0x10: [mem 0xdf73a000-0xdf73a00f 64bit]
[ 0.045362] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.045396] pci 0000:00:19.0: [8086:15a0] type 00 class 0x020000
[ 0.045409] pci 0000:00:19.0: reg 0x10: [mem 0xdf700000-0xdf71ffff]
[ 0.045415] pci 0000:00:19.0: reg 0x14: [mem 0xdf738000-0xdf738fff]
[ 0.045421] pci 0000:00:19.0: reg 0x18: [io 0xf040-0xf05f]
[ 0.045467] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.045499] pci 0000:00:1a.0: [8086:8cad] type 00 class 0x0c0320
[ 0.045514] pci 0000:00:1a.0: reg 0x10: [mem 0xdf737000-0xdf7373ff]
[ 0.045585] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.045618] pci 0000:00:1b.0: [8086:8ca0] type 00 class 0x040300
[ 0.045626] pci 0000:00:1b.0: reg 0x10: [mem 0xdf730000-0xdf733fff 64bit]
[ 0.045669] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.045696] pci 0000:00:1c.0: [8086:8c90] type 01 class 0x060400
[ 0.045745] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.045774] pci 0000:00:1c.3: [8086:8c96] type 01 class 0x060400
[ 0.045823] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.045851] pci 0000:00:1c.4: [8086:8c98] type 01 class 0x060400
[ 0.045900] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.045929] pci 0000:00:1c.6: [8086:8c9c] type 01 class 0x060400
[ 0.045978] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[ 0.046011] pci 0000:00:1d.0: [8086:8ca6] type 00 class 0x0c0320
[ 0.046027] pci 0000:00:1d.0: reg 0x10: [mem 0xdf736000-0xdf7363ff]
[ 0.046098] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.046130] pci 0000:00:1f.0: [8086:8cc4] type 00 class 0x060100
[ 0.046239] pci 0000:00:1f.2: [8086:8c82] type 00 class 0x010601
[ 0.046251] pci 0000:00:1f.2: reg 0x10: [io 0xf090-0xf097]
[ 0.046256] pci 0000:00:1f.2: reg 0x14: [io 0xf080-0xf083]
[ 0.046261] pci 0000:00:1f.2: reg 0x18: [io 0xf070-0xf077]
[ 0.046266] pci 0000:00:1f.2: reg 0x1c: [io 0xf060-0xf063]
[ 0.046271] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
[ 0.046276] pci 0000:00:1f.2: reg 0x24: [mem 0xdf735000-0xdf7357ff]
[ 0.046304] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.046328] pci 0000:00:1f.3: [8086:8ca2] type 00 class 0x0c0500
[ 0.046338] pci 0000:00:1f.3: reg 0x10: [mem 0xdf734000-0xdf7340ff 64bit]
[ 0.046354] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
[ 0.046407] pci 0000:01:00.0: [10b5:8747] type 01 class 0x060400
[ 0.046413] pci 0000:01:00.0: reg 0x10: [mem 0xdf100000-0xdf13ffff]
[ 0.046446] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.051564] pci 0000:00:01.0: PCI bridge to [bus 01-04]
[ 0.051566] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.051567] pci 0000:00:01.0: bridge window [mem 0xde000000-0xdf1fffff]
[ 0.051570] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.051606] pci 0000:02:08.0: [10b5:8747] type 01 class 0x060400
[ 0.051645] pci 0000:02:08.0: PME# supported from D0 D3hot D3cold
[ 0.051677] pci 0000:02:10.0: [10b5:8747] type 01 class 0x060400
[ 0.051716] pci 0000:02:10.0: PME# supported from D0 D3hot D3cold
[ 0.051745] pci 0000:01:00.0: PCI bridge to [bus 02-04]
[ 0.051748] pci 0000:01:00.0: bridge window [io 0xe000-0xefff]
[ 0.051750] pci 0000:01:00.0: bridge window [mem 0xde000000-0xdf0fffff]
[ 0.051753] pci 0000:01:00.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.051779] pci 0000:02:08.0: PCI bridge to [bus 04]
[ 0.051821] pci 0000:03:00.0: [10de:13c2] type 00 class 0x030000
[ 0.051830] pci 0000:03:00.0: reg 0x10: [mem 0xde000000-0xdeffffff]
[ 0.051840] pci 0000:03:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.051851] pci 0000:03:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[ 0.051858] pci 0000:03:00.0: reg 0x24: [io 0xe000-0xe07f]
[ 0.051865] pci 0000:03:00.0: reg 0x30: [mem 0xdf000000-0xdf07ffff pref]
[ 0.051918] vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=none,locks=none
[ 0.051931] pci 0000:03:00.1: [10de:0fbb] type 00 class 0x040300
[ 0.051938] pci 0000:03:00.1: reg 0x10: [mem 0xdf080000-0xdf083fff]
[ 0.058252] pci 0000:02:10.0: PCI bridge to [bus 03]
[ 0.058255] pci 0000:02:10.0: bridge window [io 0xe000-0xefff]
[ 0.058257] pci 0000:02:10.0: bridge window [mem 0xde000000-0xdf0fffff]
[ 0.058260] pci 0000:02:10.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.058300] pci 0000:00:1c.0: PCI bridge to [bus 05]
[ 0.058349] pci 0000:06:00.0: [1b21:1187] type 01 class 0x060400
[ 0.058430] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
[ 0.064932] pci 0000:00:1c.3: PCI bridge to [bus 06-0e]
[ 0.064934] pci 0000:00:1c.3: bridge window [io 0xa000-0xcfff]
[ 0.064936] pci 0000:00:1c.3: bridge window [mem 0xdf200000-0xdf4fffff]
[ 0.065000] pci 0000:07:01.0: [1b21:1187] type 01 class 0x060400
[ 0.065083] pci 0000:07:01.0: PME# supported from D0 D3hot D3cold
[ 0.065126] pci 0000:07:02.0: [1b21:1187] type 01 class 0x060400
[ 0.065209] pci 0000:07:02.0: PME# supported from D0 D3hot D3cold
[ 0.065254] pci 0000:07:03.0: [1b21:1187] type 01 class 0x060400
[ 0.065337] pci 0000:07:03.0: PME# supported from D0 D3hot D3cold
[ 0.065382] pci 0000:07:04.0: [1b21:1187] type 01 class 0x060400
[ 0.065464] pci 0000:07:04.0: PME# supported from D0 D3hot D3cold
[ 0.065510] pci 0000:07:05.0: [1b21:1187] type 01 class 0x060400
[ 0.065593] pci 0000:07:05.0: PME# supported from D0 D3hot D3cold
[ 0.065641] pci 0000:07:06.0: [1b21:1187] type 01 class 0x060400
[ 0.065724] pci 0000:07:06.0: PME# supported from D0 D3hot D3cold
[ 0.065772] pci 0000:07:07.0: [1b21:1187] type 01 class 0x060400
[ 0.065855] pci 0000:07:07.0: PME# supported from D0 D3hot D3cold
[ 0.065918] pci 0000:06:00.0: PCI bridge to [bus 07-0e]
[ 0.065923] pci 0000:06:00.0: bridge window [io 0xa000-0xcfff]
[ 0.065926] pci 0000:06:00.0: bridge window [mem 0xdf200000-0xdf4fffff]
[ 0.065979] pci 0000:07:01.0: PCI bridge to [bus 08]
[ 0.066038] pci 0000:07:02.0: PCI bridge to [bus 09]
[ 0.066117] pci 0000:0a:00.0: [1b21:0612] type 00 class 0x010601
[ 0.066134] pci 0000:0a:00.0: reg 0x10: [io 0xc050-0xc057]
[ 0.066147] pci 0000:0a:00.0: reg 0x14: [io 0xc040-0xc043]
[ 0.066160] pci 0000:0a:00.0: reg 0x18: [io 0xc030-0xc037]
[ 0.066172] pci 0000:0a:00.0: reg 0x1c: [io 0xc020-0xc023]
[ 0.066185] pci 0000:0a:00.0: reg 0x20: [io 0xc000-0xc01f]
[ 0.066198] pci 0000:0a:00.0: reg 0x24: [mem 0xdf400000-0xdf4001ff]
[ 0.071619] pci 0000:07:03.0: PCI bridge to [bus 0a]
[ 0.071625] pci 0000:07:03.0: bridge window [io 0xc000-0xcfff]
[ 0.071628] pci 0000:07:03.0: bridge window [mem 0xdf400000-0xdf4fffff]
[ 0.071681] pci 0000:07:04.0: PCI bridge to [bus 0b]
[ 0.071741] pci 0000:07:05.0: PCI bridge to [bus 0c]
[ 0.071832] pci 0000:0d:00.0: [8086:1533] type 00 class 0x020000
[ 0.071853] pci 0000:0d:00.0: reg 0x10: [mem 0xdf300000-0xdf37ffff]
[ 0.071886] pci 0000:0d:00.0: reg 0x18: [io 0xb000-0xb01f]
[ 0.071903] pci 0000:0d:00.0: reg 0x1c: [mem 0xdf380000-0xdf383fff]
[ 0.072047] pci 0000:0d:00.0: PME# supported from D0 D3hot D3cold
[ 0.078303] pci 0000:07:06.0: PCI bridge to [bus 0d]
[ 0.078309] pci 0000:07:06.0: bridge window [io 0xb000-0xbfff]
[ 0.078312] pci 0000:07:06.0: bridge window [mem 0xdf300000-0xdf3fffff]
[ 0.078387] pci 0000:0e:00.0: [1106:3403] type 00 class 0x0c0010
[ 0.078414] pci 0000:0e:00.0: reg 0x10: [mem 0xdf200000-0xdf2007ff 64bit]
[ 0.078429] pci 0000:0e:00.0: reg 0x18: [io 0xa000-0xa0ff]
[ 0.078555] pci 0000:0e:00.0: supports D2
[ 0.078556] pci 0000:0e:00.0: PME# supported from D2 D3hot D3cold
[ 0.084986] pci 0000:07:07.0: PCI bridge to [bus 0e]
[ 0.084991] pci 0000:07:07.0: bridge window [io 0xa000-0xafff]
[ 0.084994] pci 0000:07:07.0: bridge window [mem 0xdf200000-0xdf2fffff]
[ 0.085083] pci 0000:0f:00.0: [1b21:0612] type 00 class 0x010601
[ 0.085095] pci 0000:0f:00.0: reg 0x10: [io 0xd050-0xd057]
[ 0.085104] pci 0000:0f:00.0: reg 0x14: [io 0xd040-0xd043]
[ 0.085113] pci 0000:0f:00.0: reg 0x18: [io 0xd030-0xd037]
[ 0.085122] pci 0000:0f:00.0: reg 0x1c: [io 0xd020-0xd023]
[ 0.085132] pci 0000:0f:00.0: reg 0x20: [io 0xd000-0xd01f]
[ 0.085141] pci 0000:0f:00.0: reg 0x24: [mem 0xdf600000-0xdf6001ff]
[ 0.091661] pci 0000:00:1c.4: PCI bridge to [bus 0f]
[ 0.091663] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.091665] pci 0000:00:1c.4: bridge window [mem 0xdf600000-0xdf6fffff]
[ 0.091720] pci 0000:10:00.0: [1b21:1142] type 00 class 0x0c0330
[ 0.091739] pci 0000:10:00.0: reg 0x10: [mem 0xdf500000-0xdf507fff 64bit]
[ 0.091849] pci 0000:10:00.0: PME# supported from D3cold
[ 0.098344] pci 0000:00:1c.6: PCI bridge to [bus 10]
[ 0.098347] pci 0000:00:1c.6: bridge window [mem 0xdf500000-0xdf5fffff]
[ 0.098364] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 10
[ 0.098440] PCI: pci_cache_line_size set to 64 bytes
[ 0.098515] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.098516] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 0.098517] e820: reserve RAM buffer [mem 0x9c598018-0x9fffffff]
[ 0.098517] e820: reserve RAM buffer [mem 0x9e520000-0x9fffffff]
[ 0.098518] e820: reserve RAM buffer [mem 0x9e985000-0x9fffffff]
[ 0.098519] e820: reserve RAM buffer [mem 0xbd922000-0xbfffffff]
[ 0.098520] e820: reserve RAM buffer [mem 0xbf000000-0xbfffffff]
[ 0.098520] e820: reserve RAM buffer [mem 0x43f000000-0x43fffffff]
[ 0.098569] NetLabel: Initializing
[ 0.098570] NetLabel: domain hash size = 128
[ 0.098570] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.098576] NetLabel: unlabeled traffic allowed by default
[ 0.098594] Switched to clocksource refined-jiffies
[ 0.100961] pnp: PnP ACPI: disabled
[ 0.101632] pci 0000:02:08.0: PCI bridge to [bus 04]
[ 0.101639] pci 0000:02:10.0: PCI bridge to [bus 03]
[ 0.101640] pci 0000:02:10.0: bridge window [io 0xe000-0xefff]
[ 0.101643] pci 0000:02:10.0: bridge window [mem 0xde000000-0xdf0fffff]
[ 0.101645] pci 0000:02:10.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.101648] pci 0000:01:00.0: PCI bridge to [bus 02-04]
[ 0.101649] pci 0000:01:00.0: bridge window [io 0xe000-0xefff]
[ 0.101652] pci 0000:01:00.0: bridge window [mem 0xde000000-0xdf0fffff]
[ 0.101654] pci 0000:01:00.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.101657] pci 0000:00:01.0: PCI bridge to [bus 01-04]
[ 0.101661] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.101662] pci 0000:00:01.0: bridge window [mem 0xde000000-0xdf1fffff]
[ 0.101664] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.101666] pci 0000:00:1c.0: PCI bridge to [bus 05]
[ 0.101674] pci 0000:07:01.0: PCI bridge to [bus 08]
[ 0.101685] pci 0000:07:02.0: PCI bridge to [bus 09]
[ 0.101696] pci 0000:07:03.0: PCI bridge to [bus 0a]
[ 0.101698] pci 0000:07:03.0: bridge window [io 0xc000-0xcfff]
[ 0.101702] pci 0000:07:03.0: bridge window [mem 0xdf400000-0xdf4fffff]
[ 0.101710] pci 0000:07:04.0: PCI bridge to [bus 0b]
[ 0.101721] pci 0000:07:05.0: PCI bridge to [bus 0c]
[ 0.101733] pci 0000:07:06.0: PCI bridge to [bus 0d]
[ 0.101735] pci 0000:07:06.0: bridge window [io 0xb000-0xbfff]
[ 0.101739] pci 0000:07:06.0: bridge window [mem 0xdf300000-0xdf3fffff]
[ 0.101747] pci 0000:07:07.0: PCI bridge to [bus 0e]
[ 0.101748] pci 0000:07:07.0: bridge window [io 0xa000-0xafff]
[ 0.101753] pci 0000:07:07.0: bridge window [mem 0xdf200000-0xdf2fffff]
[ 0.101761] pci 0000:06:00.0: PCI bridge to [bus 07-0e]
[ 0.101762] pci 0000:06:00.0: bridge window [io 0xa000-0xcfff]
[ 0.101767] pci 0000:06:00.0: bridge window [mem 0xdf200000-0xdf4fffff]
[ 0.101774] pci 0000:00:1c.3: PCI bridge to [bus 06-0e]
[ 0.101776] pci 0000:00:1c.3: bridge window [io 0xa000-0xcfff]
[ 0.101779] pci 0000:00:1c.3: bridge window [mem 0xdf200000-0xdf4fffff]
[ 0.101783] pci 0000:00:1c.4: PCI bridge to [bus 0f]
[ 0.101785] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.101788] pci 0000:00:1c.4: bridge window [mem 0xdf600000-0xdf6fffff]
[ 0.101793] pci 0000:00:1c.6: PCI bridge to [bus 10]
[ 0.101796] pci 0000:00:1c.6: bridge window [mem 0xdf500000-0xdf5fffff]
[ 0.101801] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.101802] pci_bus 0000:00: resource 5 [mem 0x00000000-0x7fffffffff]
[ 0.101803] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.101804] pci_bus 0000:01: resource 1 [mem 0xde000000-0xdf1fffff]
[ 0.101805] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.101806] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.101807] pci_bus 0000:02: resource 1 [mem 0xde000000-0xdf0fffff]
[ 0.101807] pci_bus 0000:02: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.101808] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.101809] pci_bus 0000:03: resource 1 [mem 0xde000000-0xdf0fffff]
[ 0.101810] pci_bus 0000:03: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.101811] pci_bus 0000:06: resource 0 [io 0xa000-0xcfff]
[ 0.101812] pci_bus 0000:06: resource 1 [mem 0xdf200000-0xdf4fffff]
[ 0.101813] pci_bus 0000:07: resource 0 [io 0xa000-0xcfff]
[ 0.101813] pci_bus 0000:07: resource 1 [mem 0xdf200000-0xdf4fffff]
[ 0.101814] pci_bus 0000:0a: resource 0 [io 0xc000-0xcfff]
[ 0.101815] pci_bus 0000:0a: resource 1 [mem 0xdf400000-0xdf4fffff]
[ 0.101816] pci_bus 0000:0d: resource 0 [io 0xb000-0xbfff]
[ 0.101817] pci_bus 0000:0d: resource 1 [mem 0xdf300000-0xdf3fffff]
[ 0.101818] pci_bus 0000:0e: resource 0 [io 0xa000-0xafff]
[ 0.101819] pci_bus 0000:0e: resource 1 [mem 0xdf200000-0xdf2fffff]
[ 0.101819] pci_bus 0000:0f: resource 0 [io 0xd000-0xdfff]
[ 0.101820] pci_bus 0000:0f: resource 1 [mem 0xdf600000-0xdf6fffff]
[ 0.101821] pci_bus 0000:10: resource 1 [mem 0xdf500000-0xdf5fffff]
[ 0.101833] NET: Registered protocol family 2
[ 0.101941] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.102058] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.102147] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.102157] TCP: reno registered
[ 0.102165] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.102195] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.102236] NET: Registered protocol family 1
[ 0.102251] pci 0000:00:14.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[ 0.103443] pci 0000:00:1a.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[ 0.121537] PCI: CLS mismatch (64 != 128), using 64 bytes
[ 0.121543] pci 0000:00:1d.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[ 0.139571] pci 0000:00:1c.6: can't find IRQ for PCI INT C; please try using pci=biosirq
[ 0.139579] pci 0000:10:00.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[ 0.140768] Unpacking initramfs...
[ 0.175981] Freeing initrd memory: 3356K (ffff88007fcb9000 - ffff880080000000)
[ 0.175987] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.175989] software IO TLB [mem 0xb503e000-0xb903e000] (64MB) mapped at [ffff8800b503e000-ffff8800b903dfff]
[ 0.176028] platform rtc_cmos: registered platform RTC device (no PNP device found)
[ 0.176077] RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
[ 0.176092] microcode: CPU0 sig=0x306c3, pf=0x2, revision=0x19
[ 0.176112] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 0.176126] Scanning for low memory corruption every 60 seconds
[ 0.176233] futex hash table entries: 256 (order: 2, 16384 bytes)
[ 0.176239] Initialise system trusted keyring
[ 0.176423] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.177103] zpool: loaded
[ 0.177104] zbud: loaded
[ 0.177193] VFS: Disk quotas dquot_6.5.2
[ 0.177209] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.177270] msgmni has been set to 31984
[ 0.177299] Key type big_key registered
[ 0.177354] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.177366] io scheduler noop registered
[ 0.177367] io scheduler deadline registered
[ 0.177381] io scheduler cfq registered (default)
[ 0.177420] pcieport 0000:00:01.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[ 0.177430] pcieport 0000:00:01.0: irq 16 for MSI/MSI-X
[ 0.177454] pcieport 0000:00:1c.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[ 0.177464] pcieport 0000:00:1c.0: irq 17 for MSI/MSI-X
[ 0.177498] pcieport 0000:00:1c.3: can't find IRQ for PCI INT D; please try using pci=biosirq
[ 0.177509] pcieport 0000:00:1c.3: irq 18 for MSI/MSI-X
[ 0.177543] pcieport 0000:00:1c.4: can't find IRQ for PCI INT A; please try using pci=biosirq
[ 0.177553] pcieport 0000:00:1c.4: irq 19 for MSI/MSI-X
[ 0.177595] pcieport 0000:00:1c.6: irq 20 for MSI/MSI-X
[ 0.177629] pcieport 0000:01:00.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[ 0.177651] pcieport 0000:02:08.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[ 0.177673] pcieport 0000:02:10.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[ 0.177697] pcieport 0000:06:00.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[ 0.177740] pcieport 0000:07:01.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[ 0.177786] pcieport 0000:07:02.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[ 0.177830] pcieport 0000:07:03.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[ 0.177875] pcieport 0000:07:04.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[ 0.177920] pcieport 0000:07:05.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[ 0.177964] pcieport 0000:07:06.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[ 0.178009] pcieport 0000:07:07.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[ 0.178063] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[ 0.178064] pcieport 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 0.178065] pcieport 0000:02:08.0: Signaling PME through PCIe PME interrupt
[ 0.178066] pcieport 0000:02:10.0: Signaling PME through PCIe PME interrupt
[ 0.178066] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 0.178067] pci 0000:03:00.1: Signaling PME through PCIe PME interrupt
[ 0.178069] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[ 0.178078] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.178081] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.178089] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[ 0.178090] pcieport 0000:06:00.0: Signaling PME through PCIe PME interrupt
[ 0.178091] pcieport 0000:07:01.0: Signaling PME through PCIe PME interrupt
[ 0.178092] pcieport 0000:07:02.0: Signaling PME through PCIe PME interrupt
[ 0.178093] pcieport 0000:07:03.0: Signaling PME through PCIe PME interrupt
[ 0.178093] pci 0000:0a:00.0: Signaling PME through PCIe PME interrupt
[ 0.178094] pcieport 0000:07:04.0: Signaling PME through PCIe PME interrupt
[ 0.178095] pcieport 0000:07:05.0: Signaling PME through PCIe PME interrupt
[ 0.178095] pcieport 0000:07:06.0: Signaling PME through PCIe PME interrupt
[ 0.178096] pci 0000:0d:00.0: Signaling PME through PCIe PME interrupt
[ 0.178097] pcieport 0000:07:07.0: Signaling PME through PCIe PME interrupt
[ 0.178098] pci 0000:0e:00.0: Signaling PME through PCIe PME interrupt
[ 0.178100] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[ 0.178109] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[ 0.178109] pci 0000:0f:00.0: Signaling PME through PCIe PME interrupt
[ 0.178112] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[ 0.178121] pcieport 0000:00:1c.6: Signaling PME through PCIe PME interrupt
[ 0.178122] pci 0000:10:00.0: Signaling PME through PCIe PME interrupt
[ 0.178124] pcie_pme 0000:00:1c.6:pcie01: service driver pcie_pme loaded
[ 0.178132] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.178140] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.178157] efifb: probing for efifb
[ 0.178163] efifb: framebuffer at 0xc0000000, mapped to 0xffffc90001b80000, using 3072k, total 3072k
[ 0.178164] efifb: mode is 1024x768x32, linelength=4096, pages=1
[ 0.178165] efifb: scrolling: redraw
[ 0.178165] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.179350] Console: switching to colour frame buffer device 128x48
[ 0.180418] fb0: EFI VGA frame buffer device
[ 0.180422] intel_idle: MWAIT substates: 0x42120
[ 0.180423] intel_idle: v0.4 model 0x3C
[ 0.180424] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.180487] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.201010] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.201132] Linux agpgart interface v0.103
[ 0.201221] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[ 0.201236] rtc_cmos rtc_cmos: alarms up to one day, 114 bytes nvram
[ 0.201241] Intel P-state driver initializing.
[ 0.201260] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.201311] TCP: cubic registered
[ 0.201359] NET: Registered protocol family 10
[ 0.201460] NET: Registered protocol family 17
[ 0.201549] Loading compiled-in X.509 certificates
[ 0.201556] registered taskstats version 1
[ 0.201938] Magic number: 10:630:762
[ 0.201974] rtc_cmos rtc_cmos: setting system clock to 2014-12-30 01:46:17 UTC (1419903977)
[ 0.202020] PM: Hibernation image not present or could not be loaded.
[ 0.202422] Freeing unused kernel memory: 1136K (ffffffff818e2000 - ffffffff819fe000)
[ 0.202423] Write protecting the kernel read-only data: 8192k
[ 0.203481] Freeing unused kernel memory: 748K (ffff880001545000 - ffff880001600000)
[ 0.203917] Freeing unused kernel memory: 336K (ffff8800017ac000 - ffff880001800000)
[ 0.206804] random: systemd-tmpfile urandom read with 1 bits of entropy available
[ 0.214973] usbcore: registered new interface driver usbfs
[ 0.215012] usbcore: registered new interface driver hub
[ 0.218047] SCSI subsystem initialized
[ 0.221736] libata version 3.00 loaded.
[ 0.222022] ahci 0000:00:1f.2: version 3.0
[ 0.222027] ahci 0000:00:1f.2: can't find IRQ for PCI INT B; please try using pci=biosirq
[ 0.222053] ahci 0000:00:1f.2: irq 21 for MSI/MSI-X
[ 0.222081] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0xb impl SATA mode
[ 0.222082] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
[ 0.222421] usbcore: registered new device driver usb
[ 0.222622] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.222688] ehci-pci: EHCI PCI platform driver
[ 0.224499] firewire_ohci 0000:0e:00.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[ 0.224527] genirq: Flags mismatch irq 0. 00000080 (firewire_ohci) vs. 00015a00 (timer)
[ 0.224549] firewire_ohci 0000:0e:00.0: failed to allocate interrupt 0
[ 0.224572] firewire_ohci: probe of 0000:0e:00.0 failed with error -5
[ 0.234786] scsi host0: ahci
[ 0.234841] scsi host1: ahci
[ 0.234886] scsi host2: ahci
[ 0.234929] scsi host3: ahci
[ 0.234972] scsi host4: ahci
[ 0.235014] scsi host5: ahci
[ 0.235035] ata1: SATA max UDMA/133 abar m2048@0xdf735000 port 0xdf735100 irq 21
[ 0.235037] ata2: SATA max UDMA/133 abar m2048@0xdf735000 port 0xdf735180 irq 21
[ 0.235037] ata3: DUMMY
[ 0.235039] ata4: SATA max UDMA/133 abar m2048@0xdf735000 port 0xdf735280 irq 21
[ 0.235039] ata5: DUMMY
[ 0.235039] ata6: DUMMY
[ 0.235058] ahci 0000:0a:00.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[ 0.235097] ahci 0000:0a:00.0: irq 22 for MSI/MSI-X
[ 0.235109] ahci 0000:0a:00.0: SSS flag set, parallel bus scan disabled
[ 0.235146] ahci 0000:0a:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 0.235147] ahci 0000:0a:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
[ 0.235275] ehci-pci 0000:00:1a.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[ 0.235278] ehci-pci 0000:00:1a.0: Found HC with no IRQ. Check BIOS/PCI 0000:00:1a.0 setup!
[ 0.235297] ehci-pci 0000:00:1a.0: init 0000:00:1a.0 fail, -19
[ 0.235316] ehci-pci 0000:00:1d.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[ 0.235318] ehci-pci 0000:00:1d.0: Found HC with no IRQ. Check BIOS/PCI 0000:00:1d.0 setup!
[ 0.235338] ehci-pci 0000:00:1d.0: init 0000:00:1d.0 fail, -19
[ 0.235400] xhci_hcd 0000:00:14.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[ 0.235411] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.235414] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 0.235476] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.235486] xhci_hcd 0000:00:14.0: irq 23 for MSI/MSI-X
[ 0.235714] hub 1-0:1.0: USB hub found
[ 0.235728] hub 1-0:1.0: 14 ports detected
[ 0.235898] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.235900] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.235973] hub 2-0:1.0: USB hub found
[ 0.235998] hub 2-0:1.0: 6 ports detected
[ 0.236094] xhci_hcd 0000:10:00.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[ 0.236104] xhci_hcd 0000:10:00.0: xHCI Host Controller
[ 0.236106] xhci_hcd 0000:10:00.0: new USB bus registered, assigned bus number 3
[ 0.244565] scsi host6: ahci
[ 0.251214] scsi host7: ahci
[ 0.251240] ata7: SATA max UDMA/133 abar m512@0xdf400000 port 0xdf400100 irq 22
[ 0.251242] ata8: SATA max UDMA/133 abar m512@0xdf400000 port 0xdf400180 irq 22
[ 0.251285] ahci 0000:0f:00.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[ 0.251314] ahci 0000:0f:00.0: irq 24 for MSI/MSI-X
[ 0.251323] ahci 0000:0f:00.0: SSS flag set, parallel bus scan disabled
[ 0.251350] ahci 0000:0f:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 0.251351] ahci 0000:0f:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc
[ 0.257910] scsi host8: ahci
[ 0.264602] scsi host9: ahci
[ 0.264625] ata9: SATA max UDMA/133 abar m512@0xdf600000 port 0xdf600100 irq 24
[ 0.264627] ata10: SATA max UDMA/133 abar m512@0xdf600000 port 0xdf600180 irq 24
[ 0.296576] xhci_hcd 0000:10:00.0: irq 25 for MSI/MSI-X
[ 0.296578] xhci_hcd 0000:10:00.0: irq 26 for MSI/MSI-X
[ 0.296710] hub 3-0:1.0: USB hub found
[ 0.296716] hub 3-0:1.0: 2 ports detected
[ 0.296759] xhci_hcd 0000:10:00.0: xHCI Host Controller
[ 0.296761] xhci_hcd 0000:10:00.0: new USB bus registered, assigned bus number 4
[ 0.296875] hub 4-0:1.0: USB hub found
[ 0.296880] hub 4-0:1.0: 2 ports detected
[ 0.556696] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.558535] ata1.00: supports DRM functions and may not be fully accessible
[ 0.558561] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 0.558562] ata1.00: ATA-9: Samsung SSD 850 PRO 256GB, EXM01B6Q, max UDMA/133
[ 0.558563] ata1.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 0.558738] ata1.00: supports DRM functions and may not be fully accessible
[ 0.558763] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 0.558806] ata1.00: configured for UDMA/133
[ 0.563429] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 0.563472] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 850 1B6Q PQ: 0 ANSI: 5
[ 0.564753] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[ 0.564771] sd 0:0:0:0: [sda] Write Protect is off
[ 0.564772] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.564777] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.565118] ata2.00: ATAPI: ASUS BC-12D2HT, 1.00, max UDMA/100
[ 0.565571] sda: sda1 sda2 sda3 sda4
[ 0.565688] sd 0:0:0:0: [sda] Attached SCSI disk
[ 0.565740] ata2.00: configured for UDMA/100
[ 0.566048] scsi 1:0:0:0: CD-ROM ASUS BC-12D2HT 1.00 PQ: 0 ANSI: 5
[ 0.566799] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.567259] ata4.00: ATA-9: WDC WD3003FZEX-00Z4SA0, 01.01A01, max UDMA/133
[ 0.567260] ata4.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 0.568491] ata4.00: configured for UDMA/133
[ 0.573548] ata7: SATA link down (SStatus 0 SControl 300)
[ 0.575040] scsi 3:0:0:0: Direct-Access ATA WDC WD3003FZEX-0 1A01 PQ: 0 ANSI: 5
[ 0.575102] sd 3:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
[ 0.575103] sd 3:0:0:0: [sdb] 4096-byte physical blocks
[ 0.575115] sd 3:0:0:0: [sdb] Write Protect is off
[ 0.575116] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 0.575121] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.587016] ata9: SATA link down (SStatus 0 SControl 300)
[ 0.588472] sr 1:0:0:0: [sr0] scsi3-mmc drive: 1x/1x writer dvd-ram cd/rw xa/form2 cdda tray
[ 0.588473] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 0.588524] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 0.597116] usb 1-2: new high-speed USB device number 2 using xhci_hcd
[ 0.602136] sdb: sdb1 sdb2
[ 0.602224] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 0.796333] hub 1-2:1.0: USB hub found
[ 0.796476] hub 1-2:1.0: 4 ports detected
[ 0.897881] ata8: SATA link down (SStatus 0 SControl 300)
[ 0.958892] usb 1-7: new full-speed USB device number 3 using xhci_hcd
[ 1.138972] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.142463] usbcore: registered new interface driver usbhid
[ 1.142465] usbhid: USB HID core driver
[ 1.143465] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-7/input2
[ 1.198065] input: Logitech Unifying Device. Wireless PID:101a as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.2/0003:046D:C52B.0003/0003:046D:C52B.0004/input/input0
[ 1.198082] logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:101a] on usb-0000:00:14.0-7:1
[ 1.207130] Switched to clocksource tsc
[ 1.223905] ata10: SATA link down (SStatus 0 SControl 300)
[ 1.254898] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 1.297340] usb 1-8: new high-speed USB device number 4 using xhci_hcd
[ 1.343905] systemd[1]: systemd 218 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD +IDN)
[ 1.343953] systemd[1]: Detected architecture 'x86-64'.
[ 1.344230] systemd[1]: Set hostname to <Bastet>.
[ 1.387480] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 1.387651] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 1.387678] systemd[1]: Started Forward Passwor -
HP Pavilion 500-336 Desktop PC not recognizing NVidia GeForce GT610 graphics card
I recently purchased a HP Pavilion 500-336 Desktop PC and I already had a EVGA NVDIA GeForce GT610 graphics card. When I try and install the graphicas card, I get the 6 beeps. So, I googled the problem and somebody had suggested to disable hyperthreading in the BIOS and go to legacy mode from UEFI mode which I did as well.
However, my monitor still doesn't turn on and goes to power saving mode. Please help. The customer service rep said the power supply needs to be upgraded, but I don't think this is true. This graphics card is not that power hungry.
Here are the specifications of my desktop: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c04345595
And here are the specifications of my video card: http://www.geforce.com/hardware/desktop-gpus/geforce-gt-610/specifications
Thanks in advance.Hi:
You do not disable hyperthreading in the BIOS. I recommend you go back and enable that setting.
Please see this document for what settings you need to change in the BIOS when you install a non-HP video card...
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c03653200&lc=en&jumpid=reg_r1002_us...
Maybe you are looking for
-
Outlook and 9500 Sync but do not reflect updates
I have Outlook 2003 and the latest version of PC Suite (6.??). WHen I syncronise, either via the 9500 or via the PC, they both reflect that updates have taken place for contacts and dummy calendar entries I have entered (some on the 9500 and others i
-
A question about the TreeSelectionListener. I was having trouble adding the interface to my app, and after reading one of the examples under the JTree tutorials, I tried adding an import statement for TreeSelectionListener, along with TreeSelectionEv
-
To become a SCM Functional consultant
hi , basically i am an abaper. i have worked in some parts of BW and BI-IP planning functions. im interested to become SCM Functional consultant. please guide me. is there any certification for SCM in sap techd? regards, Raghu Edited by: raghu dasyam
-
Adding two double numbers is a problem
Hi friends.. when we try to add the two double numbers say, 119.52, 10.00 here we should get 129.52 but it is giving as 129.51999999999998 Here i want to round this to two digits after decimal point if i round the above value i will get 129.52 and th
-
I recently found I am unable to send emails from my work account (Which I think uses outlook) on my Q5. Is there anything I can do to remedy this? Thanks, mfb253