[Solved]Can t create new directory on other drives
Hi
I use arch linux 64 bit.
My system can mount other drives like usb hdd and manjaro and windows but
can t create new directory on them even as root.
my system information is :
/etc/fstab:
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
# /dev/sda3
UUID=88e6666f-6762-4f20-9944-82429dd5bc2f / ext4 rw,relatime,data=ordered 0 1
UUID=263ad1bd-2e85-4330-905c-c730193e959b swap swap defaults 0 0
/etc/group:
root:x:0:root
bin:x:1:root,bin,daemon
daemon:x:2:root,bin,daemon
sys:x:3:root,bin
adm:x:4:root,daemon
tty:x:5:
disk:x:6:root
lp:x:7:daemon
mem:x:8:
kmem:x:9:
wheel:x:10:root,hasan
ftp:x:11:
mail:x:12:
uucp:x:14:
log:x:19:root
utmp:x:20:
locate:x:21:
rfkill:x:24:
smmsp:x:25:
http:x:33:
games:x:50:
lock:x:54:
uuidd:x:68:
dbus:x:81:
network:x:90:
video:x:91:
audio:x:92:
optical:x:93:
floppy:x:94:
storage:x:95:hasan
scanner:x:96:
power:x:98:hasan
nobody:x:99:
users:x:100:
systemd-journal:x:190:
avahi:x:84:
polkitd:x:102:
lightdm:x:620:
git:x:619:
vboxusers:x:108:hasan
What can I do?
thanks
Last edited by hosseini (2014-02-08 20:47:13)
hasan@hasan ~]$ mount
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
sys on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
dev on /dev type devtmpfs (rw,nosuid,relatime,size=2018728k,nr_inodes=504682,mode=755)
run on /run type tmpfs (rw,nosuid,nodev,relatime,mode=755)
/dev/sda3 on / type ext4 (rw,relatime,data=ordered)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /sys/fs/cgroup type tmpfs (rw,nosuid,nodev,noexec,mode=755)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,release_agent=/usr/lib/systemd/systemd-cgroups-agent,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpuacct,cpu)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/net_cls type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=28,pgrp=1,timeout=300,minproto=5,maxproto=5,direct)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime)
tmpfs on /tmp type tmpfs (rw)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
mqueue on /dev/mqueue type mqueue (rw,relatime)
configfs on /sys/kernel/config type configfs (rw,relatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=1000,group_id=100)
/dev/sda1 on /media/WIN7 type ntfs (rw,nosuid,nodev,relatime,uid=1000,gid=100,fmask=0177,dmask=077,nls=utf8,errors=continue,mft_zone_multiplier=1,uhelper=udisks)
/dev/sda2 on /media/MANJARO type ext4 (rw,nosuid,nodev,relatime,data=ordered,uhelper=udisks)
I want create new directory on them. I just use enlightenment .
Last edited by hosseini (2014-02-08 19:33:17)
Similar Messages
-
Hi Guys! I can not create new partition on my MacBook Pro. I don't what just happened on it. Before i could but these fews day i can't. When I try to create new partition it said: Partition failed. couldn't modify partition map because file system verify failed. My HHD is samsung sata 640GB.
When I went to iONE (Apple store in cambodia) they check for me and they said my HHD is no problem. So please help with this.
Thanks you so much......! any ideas please send to [email protected] or [email protected]I've just scanned my logs and I've found a lot of failed connections to teamviewer but I do not have this app installed. Can you suggest me a way to stop these connections? I found tons of messages like this:
21/10/14 14:45:31,851 com.apple.xpc.launchd[1]: (com.teamviewer.service[1428]) Service could not initialize: Unable to set current working directory. error=2, path=/Applications/TeamViewer.app/Contents/Resources: 14A389: xpcproxy + 12907 [1227][1016C726-9ACF-3A24-9C51-A279F5C6B167]: 0x2
21/10/14 14:45:31,851 com.apple.xpc.launchd[1]: (com.teamviewer.service) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
21/10/14 14:45:37,239 com.apple.xpc.launchd[1]: (com.teamviewer.teamviewer[1430]) Service could not initialize: Unable to set current working directory. error=2, path=/Applications/TeamViewer.app/Contents/MacOS: 14A389: xpcproxy + 12907 [1227][1016C726-9ACF-3A24-9C51-A279F5C6B167]: 0x2
21/10/14 14:45:37,239 com.apple.xpc.launchd[1]: (com.teamviewer.teamviewer) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
thx -
Can't create new / forward / reply email on 6700 s...
I have google sync set on MFE account. It syncs well with the excising mail, calendar, contacts. But for some odd reason I can't create new mail message.
"Toimintoa ei voitu suorittaa loppuun" ( veeery vague, "Can't complete action!" I guess) says the modal dialog overlay over the recipient / subject fields. Pushing anything cancels the new message.
I have been hunting different setting for email, mfe, messages for a while but have not come up with anything that would have helped with the issue?This solved it. Don't know why. Shouldn't be like this. When I searched for it, the file appeared. Not only it it appear but my three other attempts appeared as well. All four of them are in Contacts. That's a bit wacked I think.
Thanks very much.
Wait it gets better. I went back to the email. Clicked the email address to save it. Selected Add to existing contact. Found the contact. Added it. Click Done, and the name is gone again from the Conatcts directory. Used the search function again, and it reappeared.
But there's more. Left the phone app. Came back to it and the name is gone again. Apparently every time I want this name I have to add it by searching in Spotlight, and of course it's not updating iCloud so it's never going to get back to my computer.
Message was edited by: Tom Wolsky -
Can we create new partner types for quallity notifications in SAP system?
Can we create new partner types for quallity notifications in SAP system?
The business requirement is to limit the available entries for partners displayed when they search in quality notification. I have already created new partner functions & assigned the relevant partner types, however struggling with defining new partner types.
Would appreciate help in resolving this.
Thanks,
NileshI know this customisation setting ...It allows us to create the partner functions & assign it to the partner determination procedure.
Then you can assign the procedure to the notification type.
This customisation setting does not solve the problem I have.
I'm looking for the partner type creation process which we assign to the partner function.
Edited by: NILESH BHAVE on Aug 12, 2010 3:06 PM -
Can We Create New Categories and Folders?
I hate having all of my apps piled up in the "ALL" category. Can we create new categories such as "Business Apps" or "Education" in order to stay organized? If not can we at least create folders within the existing catefories?
Solved!
Go to Solution.I read a response to a similar question yesterday on this forum. The BlackBerry tech said it is not an option right now but you can choose your favorites and have them show in the favorites section. Maybe folders will be available later. Enjoy the new tablet I know I am.
-
Can't create new projects in RoboHelp HTML 7
When I try to create a new projects in RoboHelp HTML 7, the
Projects Type field is blank on the New tab of hte New Project
dialog box. I just bought this product after using the trial
version for 30 days. I can open the projects I created before but
can't create new projects. Help! I need it now!OK, this problem is solved -- the problem was RoboSource
Control 3.1. I realized that I had installed RoboSource Control 3.1
during my Trial install (the option to install it is checked by
default). By re-running the Trial download (thank God I saved it) I
was able to uninstall RoboSource Control 3.1. (I could not
uninstall it using the Tech Comm Suite installer or the Add/Remove
function in the Windows Control Panel)
Then I ran the Tech Comm Suite install and reinstalled
RoboHelp 7 (without installing RoboSource Control 3.1).
Now RoboHelp 7 HTML works again. Note that only the HTML
version was screwed up -- the Word version ran OK, I just don't
need it.
Finally, I just want to say, Adobe Tech Support *SUCKS*.
After spending a half hour on my initial call on Sept. 26th, "Ken"
directed me to the Adobe Support web page and told me to enter my
problem myself -- thanks for nothing, Ken. He promised a 24 hour
turn around, which did not happen.
When I called back on Sept. 29th, I wasted another hour with
Natasha and Sam, who had me run CSClean, which wiped out my
registry entries for Acrobat and Photoshop, forcing a reinstall of
those products. Of course, that did not help me at all.
Adobe, please stop outsourcing your Tech Support to India --
those guys know nothing!
The replies to this issue on the "Customer Support Portal"
have been slow, indifferent and unhelpful. Shame on them!
I'm posting this fix to this problem on this Forum, so the
next poor slob may be able to fix their problem themselves as I
did, 'cause Tech Support sure won't help! -
In garageband I can't create new projects
In garageband I can't create new projects it says file couldn't be opened. Checking on web searches some indicate to check under Library... I do not have a Library directory on my system. Garageband came with the Mac. Any clues how to get it to work?
kenevans3 wrote:
I do not have a Library directory on my system.
in Finder hold down the OptionKey and click the Go menu, select the Library menuItem to open it -
Can't create new folder in home folder when saving files
In gnome, when I want to save any file in my home folder, and I want to create a new folder in my own home. The new folder appeares for several minutes and then disappears.
If I create new folder in other directory. There is no such problem.
Also I can create new folder in my own home directory in nautilus or by mkdir.
any one can help me.....
Thanks very much....I think either way should work OK - it's less of a security risk to use a standard account for "everything", including web browsing, but I confess I don't myself do this. You would again have to authenticate with an admin username/password if you do download and install from the standard account.
Whichever way you do it, this article may be relevant:
*About file quarantine in Mac OS X v10.5 and v10.6*
http://support.apple.com/kb/HT3662
It includes the following:
If you have multiple user accounts on your Mac, the user account that downloaded the file is the only user account that can remove the quarantine attribute to the file. All other user accounts can open the quarantine file, but they will be presented with the quarantine dialog box asking "Are you sure you want to open it?" every time they open the file.
-------------------- -
My friend created me an itunes store account with his credit card , his credit card is about to expire and they are asking me to re-enter the credit card and security card number .... I don't have these numbers ... How can i create new itunes account without credit card?????
Why do you need to create a new account?
Just change the payment method.
http://support.apple.com/kb/ht1918 -
When i bought this iMac i failed to register correctly and as i am trying to install a printer i need to do this when i am logging on. How can i create new password
See
http://osxdaily.com/2011/08/24/reset-mac-os-x-10-7-lion-password/ and
http://osxdaily.com/2011/09/19/change-password-mac-os-x-10-7-lion-without-knowin g-current-password/
which also apply to Mtn Lion and Macericks. -
Can not open JPEG files and can not create JPEG files from other software
Can not open JPEG files and can not create JPEG files from other software (For example from Solidworks).
When I try to right click on a JPEG, a notice window appears written: "Windows Explorer has stopped working - Windows is
checking for a solution to the problem" and then the notice box disapears, the desktop appears and I can continue working.
From the other side - If I try to save as JPEG a screen of Solidworks (like a view of a part) the Solidworks falls but the JPEG
is created (I can see its name in the directory I created it).
I can open the JPEGS with the Paint software if I want but not with the Windows Photo Viewer.
I have the feeling that the Windows Photo Viewer disapeared from my computer - just a feeling.
I will appreciate your assistance.
Avi T. 2014Hi,
Did Windows Photo Viewer option appear when you right click the JPEG file and select open with?
I would like suggest you use Clean Boot to troubleshoot if there is third-party software conflict:
How to perform a clean boot in Windows
http://support.microsoft.com/kb/929135
Karen Hu
TechNet Community Support -
Can we create new cref.exe
Hi all,
suppose if we modify the source code present in java card framework and then compile them to class files, converting these class files to JCA files , generating mask files from these JCA files, and using these mask files along with C code available to create new cref.exe
Is it possible to do the above steps.
Thanks in advance
murali920553 wrote:
can we create new LOV's using forms personalizationhttps://forums.oracle.com/forums/search.jspa?threadID=&q=personalization+AND+LOV&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein -
I have a question, can i create new CRM(Conflict resolution Manager) additionally in 11i EBS..?
do we find any scripts to check about concurrent managers in EBS from back end(sqlplus )..?yes default installation give you some scripts to check about concurrent managers.
The following SQL scripts located under $FND_TOP/sql :
1. afimchk.sql Tells the status of the ICM and PMON method
2. afcmstat.sql Lists active manager processes
3. afrqrun.sql Lists all the running, waiting and terminating requests
4. afrqwait.sql Lists requests that are constrained and waiting for the ICM to release them
5. afrqscm.sql Prints log file name of managers that can run a given request. It can be used to check for possible errors when a request stays in pending status. It requires a request id value.
6. afcmcreq.sql Prints the log file name of the manager that processed the request
7. afrqstat.sql Summary of completed concurrent requests grouped by completion status and execution type. It requires number of days prior to today on which to report parameter.
8. afimlock.sql Lists locks that the ICM is waiting to get
9. afcmrrq.sql Lists managers that currently are running a request -
HT201240 I forget my password and hint . How can I create new password ?
I forget my password and hint in MacBook Air 11-inch mid 2012 . How can I create new password .
Reset Password
OS X 10.7 Lion /10.8 MountainLion
Follow the instructions in the first and the third boxes.
http://pondini.org/OSX/Password.html
Note
Keychain
http://support.apple.com/kb/PH10623
Best. -
Can we create new tablespace in Oracle Database 10g Express Edition?
Hi,
Can we create new tablespace in Oracle Database 10g Express Edition instead of using the default "users" tablespace provided?
Please advise.
Thank you.Correct. The sum of all user tablespaces is not allowed to exceed 4 GIG.
You could try shrinking your tablespaces. Theres a script called maxshrink on http://asktom.oracle.com which is useful for this.
You could compress your tables.
If you are storing lobs, you could consider storing them as bfiles.
Or upgrade to Oracle Standard Edition 1. Its not that expensive.
Maybe you are looking for
-
Need help on implementation of AI move generation
Hi, I am totally new to Java so please be patient. I am attempting to write a a card-shredding game in java and am currently in the process of writing code for the AI move generation. To generate all combinations of possible moves. I am stuck at this
-
Lightroom 4.4 Won't Open Up
Just this week when I try to open LR, it just does not open. No errors and PC just freezes. It WILL open in Safe Mode, just not in normal mode. Then PC just hangs up and I need to hard power off. Anyone having issues like this?
-
Songs not playing all the way through.
When playing songs in iTunes, whether bought in iTunes or not, sometimes the song stops playing with 30 seconds left and goes to the next song. Why is this happening and how do i fix it?
-
i am creating the desktop sharing gadget via rmi,, every thing is fine apart from it does not respond to key events..i don't understand where i am lacking.. here's server code. public class ServerInterface extends UnicastRemoteObject implements Syste
-
Lightroom can't import from firewire card reader. PS,Nikon Capture, RSP have no problems with the reader. Windows Vista AMD 6000+ 3GHZ 2gb DDR2