[SOLVED] Changed an option in /etc/updatedb.conf

Hello all,
I started using locate to search my files. However, it never showed files in my /home directory which is, obviously, the directory I search most. Running updatedb --debug-pruning I found out that it didn't add /home to the database because it's an "autofs" filetype:
┌─[jente @ lappy ~] 23:54:27
└─■ sudo updatedb --debug-pruning
`/home' (32 on 18) is `/' of `systemd-1' (0:27), type `autofs'
Skipping `/home': in prunefs
So, I edited /etc/updatedb.conf and removed autofs from the PRUNEFS line. I never found any documentation on this and thus, I don't know if this is the correct way of solving this. Hence this post; I would just like to get some feedback on whether or not I fixed this the right way.
Thanks in advance, guys!
Last edited by Unia (2012-12-15 13:45:36)

Unia wrote:
Mr.Elendig wrote:Another way would be to add your /home to fstab instead.
Hey! Thanks for your input. My /home is actually already there:
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
tmpfs /tmp tmpfs nodev,nosuid 0 0
# /dev/sda1
UUID=60eb73f7-635c-4b3e-9d6a-8bb49aee739a / ext4 rw,relatime 0 1
# /dev/sda2 LABEL=home
UUID=4470b151-db99-4586-a652-398e0e8995cb /home ext4 rw,relatime,noauto,x-systemd.automount 0 2
If your /home is on an internal disk, why use automount?

Similar Messages

  • [Solved] I make mistake, switch /etc/fonts/conf.d of ubuntu to my arch

    Arch's fonts was too small in firefox and sites was difficult to read and with layout wrong because of font, then I switch the fonts config of ubuntu to my arch to fix this problem and I solve, otherwise now I receive errors in terminal when I perform a program like this: Fontconfig warning: "/etc/fonts/conf.d/53-monospace-lcd-filter.conf", line 17: invalid constant used : legacy".
    somebody can help me?
    sorry by bad english.
    Last edited by solanoalves (2008-01-23 04:08:29)

    A good idea would be to post that file.
    An alternative would be to remove the contents of /etc/fonts/conf.d and reinstall the fontconfig package. Then follow the instructions in the wiki to get a better font rendering.
    Good luck

  • [solved] changed owner of /usr /etc /var folders ..

    Hello There !
    I messed up, as being the root user,
    did a
    chown -R root /usr /var /etc
    I'm using KDE 4.2, and I bet I messed up with the system.
    How can I recover this ?
    I cannot start up kde from KDM, just dont know how can I make it work. I reinstalled the whole kde packages..
    Thanks in advance.
    Quarkup
    edit: solved it by installing and turning on the  "consolekit" daemon: see this topic http://bbs.archlinux.org/viewtopic.php?id=62554
    Last edited by quarkup (2009-04-01 18:09:52)

    byte wrote:[byte@io ~]$ find /usr/ ! -user root -o ! -group root | xargs ls -l
    -rwxr-sr-x 1 root locate 30860 19. Jan 04:27 /usr/bin/locate
    -rwxr-sr-x 1 root mail 78208 21. Mär 00:35 /usr/bin/mail
    -rwxr-sr-x 1 root tty 8596 9. Mär 18:31 /usr/bin/write
    -rwxr-sr-x 1 root policykit 13336 30. Nov 15:51 /usr/lib/PolicyKit/polkit-explicit-grant-helper
    -rwxr-sr-x 1 root policykit 14680 30. Nov 15:51 /usr/lib/PolicyKit/polkit-grant-helper
    -rwsr-xr-- 1 root policykit 7568 30. Nov 15:51 /usr/lib/PolicyKit/polkit-grant-helper-pam
    -rwxr-sr-x 1 root policykit 9132 30. Nov 15:51 /usr/lib/PolicyKit/polkit-read-auth-helper
    -rwxr-sr-x 1 root policykit 14968 30. Nov 15:51 /usr/lib/PolicyKit/polkit-revoke-helper
    -rwsr-xr-x 1 policykit root 15036 30. Nov 15:51 /usr/lib/PolicyKit/polkit-set-default-helper
    -rwsr-x--- 1 root dbus 40004 8. Mär 13:58 /usr/lib/dbus-1.0/dbus-daemon-launch-helper
    -r--r--r-- 1 root mail 947 21. Mär 00:35 /usr/share/misc/mail.help
    -r--r--r-- 1 root mail 823 21. Mär 00:35 /usr/share/misc/mail.tildehelp
    That's interesting, all my policykit files are owned either by root:root or root:<user>, with the exception of /usr/lib/Policykit/polkit-set-default-helper, which is policykit:root. So maybe changing either to what byte listed or to root:root or root:<user> for those files would work.
    02:57 PM:/usr/lib/PolicyKit $ ll
    total 204
    -rwxr-sr-x 1 root sero 17152 2008-11-30 09:43 polkit-explicit-grant-helper*
    -rwxr-xr-x 1 root root 66864 2008-10-12 14:13 polkit-gnome-manager*
    -rwxr-sr-x 1 root sero 17464 2008-11-30 09:43 polkit-grant-helper*
    -rwsr-xr-- 1 root sero 9880 2008-11-30 09:43 polkit-grant-helper-pam*
    -rwxr-sr-x 1 root sero 11360 2008-11-30 09:43 polkit-read-auth-helper*
    -rwsr-xr-x 1 root root 8008 2008-11-30 09:43 polkit-resolve-exe-helper*
    -rwxr-sr-x 1 root sero 19520 2008-11-30 09:43 polkit-revoke-helper*
    -rwsr-xr-x 1 policykit root 19544 2008-11-30 09:43 polkit-set-default-helper*
    -rwxr-xr-x 1 root root 19888 2008-11-30 09:43 polkitd*
    If not, maybe reinstalling xorg-server would set the right permissions again.
    Last edited by userlander (2009-03-22 19:09:31)

  • [SOLVED]/etc/vconsole.conf doesn't react to any change

    Hi,
    I'm new in Arch Linux, so sorry if I'm missreading something.
    I try to change my font and keymap using this manual: https://wiki.archlinux.org/index.php/KEYMAP
    So i edit /etc/vconsole.conf like this:
    KEYMAP=cz-lat2
    FONT=Lat2-Terminus16
    but nothing change, even after reboot. "kbd" is installed.
    Btw. when I run "setfont Lat2-Terminus16" the font is changed (but just this session).
    Thanks
    Last edited by Kotrfa (2012-11-06 16:22:41)

    It doesnt work in any form.
    I tried to add i915 to my mkinicpio to modules, but when I run:
    [dan@localhost ~]$ sudo mkinitcpio -p linux
    [sudo] password for root:
    ==> Building image from preset: 'default'
    -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
    ==> Starting build: 3.6.3-1-ARCH
    -> Running build hook: [base]
    -> Running build hook: [udev]
    -> Running build hook: [autodetect]
    findmnt: /etc/fstab: parse error at line 7
    -> Running build hook: [pata]
    -> Running build hook: [scsi]
    -> Running build hook: [sata]
    -> Running build hook: [filesystems]
    -> Running build hook: [usbinput]
    -> Running build hook: [fsck]
    ==> Generating module dependencies
    ==> Creating gzip initcpio image: /boot/initramfs-linux.img
    bsdcpio: Failed to set default locale
    ==> Image generation successful
    ==> Building image from preset: 'fallback'
    -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
    ==> Starting build: 3.6.3-1-ARCH
    -> Running build hook: [base]
    -> Running build hook: [udev]
    -> Running build hook: [pata]
    -> Running build hook: [scsi]
    -> Running build hook: [sata]
    -> Running build hook: [filesystems]
    -> Running build hook: [usbinput]
    -> Running build hook: [fsck]
    ==> Generating module dependencies
    ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
    bsdcpio: Failed to set default locale
    ==> Image generation successful
    There are messages about failing to set locale.
    Btw. here is my locale and locale -a output:
    [dan@localhost ~]$ locale -a
    locale: Cannot set LC_CTYPE to default locale: No such file or directory
    locale: Cannot set LC_MESSAGES to default locale: No such file or directory
    locale: Cannot set LC_COLLATE to default locale: No such file or directory
    C
    POSIX
    cs_CZ.utf8
    en_GB.utf8
    [dan@localhost ~]$ locale
    locale: Cannot set LC_CTYPE to default locale: No such file or directory
    locale: Cannot set LC_MESSAGES to default locale: No such file or directory
    locale: Cannot set LC_ALL to default locale: No such file or directory
    LANG=en_US.utf8
    LC_CTYPE="en_US.utf8"
    LC_NUMERIC="en_US.utf8"
    LC_TIME="en_US.utf8"
    LC_COLLATE="en_US.utf8"
    LC_MONETARY="en_US.utf8"
    LC_MESSAGES="en_US.utf8"
    LC_PAPER="en_US.utf8"
    LC_NAME="en_US.utf8"
    LC_ADDRESS="en_US.utf8"
    LC_TELEPHONE="en_US.utf8"
    LC_MEASUREMENT="en_US.utf8"
    LC_IDENTIFICATION="en_US.utf8"
    LC_ALL=
    Edit: When I try to change my keyboard layout in gnome creating /etc/X11/xorg.conf.d/10-keyboard.conf with:
    Section "InputClass"
    Identifier "Keyboard Defaults"
    MatchIsKeyboard "yes"
    Option "XbkLayout" "cz"
    EndSection
    it doesn't work.
    And when I try to use: "setxkbmap cz", it change my keyboard to czech, but it doesn't work in terminal (when i type "+ěščřtřžýáí" i get "+???????".
    Last edited by Kotrfa (2012-10-29 12:33:51)

  • [Solved] Changed Graphics Driver/Xorg.conf, Font Size Now Different

    Hello,
    I just got the Catalyst 9.4 drivers working on my laptop (Lenovo T400) since the open source ones just can't keep up (even with DRI).
    The problem is now my fonts are all different sizes (or not loading).
    I was thinking this might be because of my monitor settings in xorg.conf.  I've spent a really long time trying to get the catalyst drivers working (I'm doing OpenGL work, so I kinda need them), so I definitely understand why the Arch team took them out of the main repository.  I'm just a little hesitant about changing settings after I finally found a working config.
    Old:
    Section "ServerLayout"
    Identifier "Xorg Configured"
    Screen 0 "Screen0" 0 0
    InputDevice "Keyboard0" "CoreKeyboard"
    # PS/2 Mouse not detected
    # Serial Mouse not detected
    InputDevice "Touchpad" "CorePointer"
    EndSection
    Section "ServerFlags"
    Option "AllowMouseOpenFail" "true"
    Option "AutoAddDevices" "False"
    EndSection
    Section "Files"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc:unscaled"
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/75dpi:unscaled"
    FontPath "/usr/share/fonts/75dpi"
    FontPath "/usr/share/fonts/100dpi:unscaled"
    FontPath "/usr/share/fonts/100dpi"
    FontPath "/usr/share/fonts/PEX"
    # Additional fonts: Locale, Gimp, TTF...
    FontPath "/usr/share/fonts/cyrillic"
    # FontPath "/usr/share/lib/X11/fonts/latin2/75dpi"
    # FontPath "/usr/share/lib/X11/fonts/latin2/100dpi"
    # True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
    FontPath "/usr/share/fonts/Type1"
    FontPath "/usr/share/fonts/ttf/western"
    FontPath "/usr/share/fonts/ttf/decoratives"
    FontPath "/usr/share/fonts/truetype"
    FontPath "/usr/share/fonts/truetype/openoffice"
    FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
    FontPath "/usr/share/fonts/latex-ttf-fonts"
    FontPath "/usr/share/fonts/defoma/CID"
    FontPath "/usr/share/fonts/defoma/TrueType"
    EndSection
    Section "Module"
    Load "ddc" # ddc probing of monitor
    Load "dbe"
    Load "dri"
    Load "extmod"
    Load "glx"
    Load "bitmap" # bitmap-fonts
    Load "type1"
    Load "freetype"
    Load "record"
    Load "synaptics"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    Option "DPMS" "# HorizSync 28.0 - 78.0 # Warning: This may fry very old Monitors
    HorizSync 28.0 - 96.0 # Warning: This may fry old Monitors
    VertRefresh 50.0 - 75.0 # Very conservative. May flicker.
    # VertRefresh 50.0 - 62.0 # Extreme conservative. Will flicker. TFT default.
    # Default modes distilled from
    # "VESA and Industry Standards and Guide for Computer Display Monitor
    # Timing", version 1.0, revision 0.8, adopted September 17, 1998.
    # $XFree86: xc/programs/Xserver/hw/xfree86/etc/vesamodes,v 1.4 1999/11/18 16:52:17 tsi Exp $
    # 640x350 @ 85Hz (VESA) hsync: 37.9kHz
    ModeLine "640x350" 31.5 640 672 736 832 350 382 385 445 +hsync -vsync
    # 640x400 @ 85Hz (VESA) hsync: 37.9kHz
    ModeLine "640x400" 31.5 640 672 736 832 400 401 404 445 -hsync +vsync
    # 720x400 @ 85Hz (VESA) hsync: 37.9kHz
    ModeLine "720x400" 35.5 720 756 828 936 400 401 404 446 -hsync +vsync
    # 640x480 @ 60Hz (Industry standard) hsync: 31.5kHz
    ModeLine "640x480" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync
    # 640x480 @ 72Hz (VESA) hsync: 37.9kHz
    ModeLine "640x480" 31.5 640 664 704 832 480 489 491 520 -hsync -vsync
    # 640x480 @ 75Hz (VESA) hsync: 37.5kHz
    ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -hsync -vsync
    # 640x480 @ 85Hz (VESA) hsync: 43.3kHz
    ModeLine "640x480" 36.0 640 696 752 832 480 481 484 509 -hsync -vsync
    # 800x600 @ 56Hz (VESA) hsync: 35.2kHz
    ModeLine "800x600" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
    # 800x600 @ 60Hz (VESA) hsync: 37.9kHz
    ModeLine "800x600" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
    # 800x600 @ 72Hz (VESA) hsync: 48.1kHz
    ModeLine "800x600" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
    # 800x600 @ 75Hz (VESA) hsync: 46.9kHz
    ModeLine "800x600" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
    # 800x600 @ 85Hz (VESA) hsync: 53.7kHz
    ModeLine "800x600" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
    # 1024x768i @ 43Hz (industry standard) hsync: 35.5kHz
    ModeLine "1024x768" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync +vsync Interlace
    # 1024x768 @ 60Hz (VESA) hsync: 48.4kHz
    ModeLine "1024x768" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
    # 1024x768 @ 70Hz (VESA) hsync: 56.5kHz
    ModeLine "1024x768" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
    # 1024x768 @ 75Hz (VESA) hsync: 60.0kHz
    ModeLine "1024x768" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
    # 1024x768 @ 85Hz (VESA) hsync: 68.7kHz
    ModeLine "1024x768" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
    # 1152x864 @ 75Hz (VESA) hsync: 67.5kHz
    ModeLine "1152x864" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
    # 1280x960 @ 60Hz (VESA) hsync: 60.0kHz
    ModeLine "1280x960" 108.0 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync
    # 1280x960 @ 85Hz (VESA) hsync: 85.9kHz
    ModeLine "1280x960" 148.5 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync
    # 1280x1024 @ 60Hz (VESA) hsync: 64.0kHz
    ModeLine "1280x1024" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
    # 1280x1024 @ 75Hz (VESA) hsync: 80.0kHz
    ModeLine "1280x1024" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
    # 1280x1024 @ 85Hz (VESA) hsync: 91.1kHz
    ModeLine "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync
    # 1600x1200 @ 60Hz (VESA) hsync: 75.0kHz
    ModeLine "1600x1200" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    # 1600x1200 @ 65Hz (VESA) hsync: 81.3kHz
    ModeLine "1600x1200" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    # 1600x1200 @ 70Hz (VESA) hsync: 87.5kHz
    ModeLine "1600x1200" 189.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    # 1600x1200 @ 75Hz (VESA) hsync: 93.8kHz
    ModeLine "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    # 1600x1200 @ 85Hz (VESA) hsync: 106.3kHz
    ModeLine "1600x1200" 229.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    # 1792x1344 @ 60Hz (VESA) hsync: 83.6kHz
    ModeLine "1792x1344" 204.8 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync
    # 1792x1344 @ 75Hz (VESA) hsync: 106.3kHz
    ModeLine "1792x1344" 261.0 1792 1888 2104 2456 1344 1345 1348 1417 -hsync +vsync
    # 1856x1392 @ 60Hz (VESA) hsync: 86.3kHz
    ModeLine "1856x1392" 218.3 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync
    # 1856x1392 @ 75Hz (VESA) hsync: 112.5kHz
    ModeLine "1856x1392" 288.0 1856 1984 2208 2560 1392 1393 1396 1500 -hsync +vsync
    # 1920x1440 @ 60Hz (VESA) hsync: 90.0kHz
    ModeLine "1920x1440" 234.0 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync
    # 1920x1440 @ 75Hz (VESA) hsync: 112.5kHz
    ModeLine "1920x1440" 297.0 1920 2064 2288 2640 1440 1441 1444 1500 -hsync +vsync
    # Additional modelines
    ModeLine "1800x1440" 230 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
    ModeLine "1800x1440" 250 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
    # Extended modelines with GTF timings
    # 640x480 @ 100.00 Hz (GTF) hsync: 50.90 kHz; pclk: 43.16 MHz
    ModeLine "640x480" 43.16 640 680 744 848 480 481 484 509 -HSync +Vsync
    # 768x576 @ 60.00 Hz (GTF) hsync: 35.82 kHz; pclk: 34.96 MHz
    ModeLine "768x576" 34.96 768 792 872 976 576 577 580 597 -HSync +Vsync
    # 768x576 @ 72.00 Hz (GTF) hsync: 43.27 kHz; pclk: 42.93 MHz
    ModeLine "768x576" 42.93 768 800 880 992 576 577 580 601 -HSync +Vsync
    # 768x576 @ 75.00 Hz (GTF) hsync: 45.15 kHz; pclk: 45.51 MHz
    ModeLine "768x576" 45.51 768 808 888 1008 576 577 580 602 -HSync +Vsync
    # 768x576 @ 85.00 Hz (GTF) hsync: 51.42 kHz; pclk: 51.84 MHz
    ModeLine "768x576" 51.84 768 808 888 1008 576 577 580 605 -HSync +Vsync
    # 768x576 @ 100.00 Hz (GTF) hsync: 61.10 kHz; pclk: 62.57 MHz
    ModeLine "768x576" 62.57 768 816 896 1024 576 577 580 611 -HSync +Vsync
    # 800x600 @ 100.00 Hz (GTF) hsync: 63.60 kHz; pclk: 68.18 MHz
    ModeLine "800x600" 68.18 800 848 936 1072 600 601 604 636 -HSync +Vsync
    # 1024x768 @ 100.00 Hz (GTF) hsync: 81.40 kHz; pclk: 113.31 MHz
    ModeLine "1024x768" 113.31 1024 1096 1208 1392 768 769 772 814 -HSync +Vsync
    # 1152x864 @ 60.00 Hz (GTF) hsync: 53.70 kHz; pclk: 81.62 MHz
    ModeLine "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 -HSync +Vsync
    # 1152x864 @ 85.00 Hz (GTF) hsync: 77.10 kHz; pclk: 119.65 MHz
    ModeLine "1152x864" 119.65 1152 1224 1352 1552 864 865 868 907 -HSync +Vsync
    # 1152x864 @ 100.00 Hz (GTF) hsync: 91.50 kHz; pclk: 143.47 MHz
    ModeLine "1152x864" 143.47 1152 1232 1360 1568 864 865 868 915 -HSync +Vsync
    # 1280x960 @ 72.00 Hz (GTF) hsync: 72.07 kHz; pclk: 124.54 MHz
    ModeLine "1280x960" 124.54 1280 1368 1504 1728 960 961 964 1001 -HSync +Vsync
    # 1280x960 @ 75.00 Hz (GTF) hsync: 75.15 kHz; pclk: 129.86 MHz
    ModeLine "1280x960" 129.86 1280 1368 1504 1728 960 961 964 1002 -HSync +Vsync
    # 1280x960 @ 100.00 Hz (GTF) hsync: 101.70 kHz; pclk: 178.99 MHz
    ModeLine "1280x960" 178.99 1280 1376 1520 1760 960 961 964 1017 -HSync +Vsync
    # 1280x1024 @ 100.00 Hz (GTF) hsync: 108.50 kHz; pclk: 190.96 MHz
    ModeLine "1280x1024" 190.96 1280 1376 1520 1760 1024 1025 1028 1085 -HSync +Vsync
    # 1400x1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 122.61 MHz
    ModeLine "1400x1050" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -HSync +Vsync
    # 1400x1050 @ 72.00 Hz (GTF) hsync: 78.77 kHz; pclk: 149.34 MHz
    ModeLine "1400x1050" 149.34 1400 1496 1648 1896 1050 1051 1054 1094 -HSync +Vsync
    # 1400x1050 @ 75.00 Hz (GTF) hsync: 82.20 kHz; pclk: 155.85 MHz
    ModeLine "1400x1050" 155.85 1400 1496 1648 1896 1050 1051 1054 1096 -HSync +Vsync
    # 1400x1050 @ 85.00 Hz (GTF) hsync: 93.76 kHz; pclk: 179.26 MHz
    ModeLine "1400x1050" 179.26 1400 1504 1656 1912 1050 1051 1054 1103 -HSync +Vsync
    # 1400x1050 @ 100.00 Hz (GTF) hsync: 111.20 kHz; pclk: 214.39 MHz
    ModeLine "1400x1050" 214.39 1400 1512 1664 1928 1050 1051 1054 1112 -HSync +Vsync
    # 1600x1200 @ 100.00 Hz (GTF) hsync: 127.10 kHz; pclk: 280.64 MHz
    ModeLine "1600x1200" 280.64 1600 1728 1904 2208 1200 1201 1204 1271 -HSync +Vsync
    EndSection
    Section "Device"
    ### Available Driver options are:-
    ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
    ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
    ### [arg]: arg optional
    #Option "NoAccel" # [<bool>]
    #Option "AccelMethod" # [<str>]
    #Option "offscreensize" # [<str>]
    #Option "SWcursor" # [<bool>]
    #Option "ignoreconnector" # [<str>]
    #Option "forcereduced" # [<bool>]
    #Option "forcedpi" # <i>
    #Option "useconfiguredmonitor" # [<bool>]
    #Option "HPD" # <str>
    #Option "NoRandr" # [<bool>]
    #Option "RROutputOrder" # [<str>]
    #Option "DRI" # [<bool>]
    #Option "TVMode" # [<str>]
    #Option "ScaleType" # [<str>]
    #Option "UseAtomBIOS" # [<bool>]
    #Option "AtomBIOS" # [<str>]
    #Option "UnverifiedFeatures" # [<bool>]
    #Option "Audio" # [<bool>]
    #Option "HDMI" # [<str>]
    #Option "COHERENT" # [<str>]
    Identifier "Card0"
    Driver "radeonhd"
    VendorName "ATI Technologies Inc"
    BoardName "Mobility Radeon HD 3400 Series"
    BusID "PCI:1:0:0"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Card0"
    Monitor "Monitor0"
    DefaultColorDepth 16
    SubSection "Display"
    Depth 1
    Modes "1440x900
    EndSubSection
    SubSection "Display"
    Depth 4
    Modes "1440x900
    EndSubSection
    SubSection "Display"
    Depth 8
    Modes "1440x900
    EndSubSection
    SubSection "Display"
    Depth 15
    Modes "1440x900
    EndSubSection
    SubSection "Display"
    Depth 16
    Modes "1440x900
    EndSubSection
    SubSection "Display"
    Depth 24
    Modes "1440x900
    EndSubSection
    SubSection "Display"
    Depth 32
    Modes "1440x900"
    EndSubSection
    EndSection
    Section "DRI"
    Mode 0666
    EndSection
    New:
    Section "ServerLayout"
    # PS/2 Mouse not detected
    # Serial Mouse not detected
    Identifier "Xorg Configured"
    Screen 0 "aticonfig-Screen[0]-0" 0 0
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "Touchpad" "CorePointer"
    EndSection
    Section "Files"
    # Additional fonts: Locale, Gimp, TTF...
    # FontPath "/usr/share/lib/X11/fonts/latin2/75dpi"
    # FontPath "/usr/share/lib/X11/fonts/latin2/100dpi"
    # True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc:unscaled"
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/75dpi:unscaled"
    FontPath "/usr/share/fonts/75dpi"
    FontPath "/usr/share/fonts/100dpi:unscaled"
    FontPath "/usr/share/fonts/100dpi"
    FontPath "/usr/share/fonts/PEX"
    FontPath "/usr/share/fonts/cyrillic"
    FontPath "/usr/share/fonts/Type1"
    FontPath "/usr/share/fonts/ttf/western"
    FontPath "/usr/share/fonts/ttf/decoratives"
    FontPath "/usr/share/fonts/truetype"
    FontPath "/usr/share/fonts/truetype/openoffice"
    FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
    FontPath "/usr/share/fonts/latex-ttf-fonts"
    FontPath "/usr/share/fonts/defoma/CID"
    FontPath "/usr/share/fonts/defoma/TrueType"
    EndSection
    Section "Module"
    Load "ddc" # ddc probing of monitor
    Load "dbe"
    Load "dri"
    Load "extmod"
    Load "glx"
    Load "bitmap" # bitmap-fonts
    Load "type1"
    Load "freetype"
    Load "record"
    Load "synaptics"
    EndSection
    #Cut out input devices section...
    Section "Monitor"
    # Warning: This may fry old Monitors
    # Very conservative. May flicker.
    # VertRefresh 50.0 - 62.0 # Extreme conservative. Will flicker. TFT default.
    # Default modes distilled from
    # "VESA and Industry Standards and Guide for Computer Display Monitor
    # Timing", version 1.0, revision 0.8, adopted September 17, 1998.
    # $XFree86: xc/programs/Xserver/hw/xfree86/etc/vesamodes,v 1.4 1999/11/18 16:52:17 tsi Exp $
    # 640x350 @ 85Hz (VESA) hsync: 37.9kHz
    Identifier "Panel"
    HorizSync 28.0 - 96.0
    VertRefresh 50.0 - 75.0
    ModeLine "640x350" 31.5 640 672 736 832 350 382 385 445 +hsync -vsync
    ModeLine "640x400" 31.5 640 672 736 832 400 401 404 445 -hsync +vsync
    ModeLine "720x400" 35.5 720 756 828 936 400 401 404 446 -hsync +vsync
    ModeLine "640x480" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync
    ModeLine "640x480" 31.5 640 664 704 832 480 489 491 520 -hsync -vsync
    ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -hsync -vsync
    ModeLine "640x480" 36.0 640 696 752 832 480 481 484 509 -hsync -vsync
    ModeLine "800x600" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
    ModeLine "800x600" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
    ModeLine "800x600" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
    ModeLine "800x600" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
    ModeLine "800x600" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
    ModeLine "1024x768" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync +vsync interlace
    ModeLine "1024x768" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
    ModeLine "1024x768" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
    ModeLine "1024x768" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
    ModeLine "1024x768" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
    ModeLine "1152x864" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
    ModeLine "1280x960" 108.0 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync
    ModeLine "1280x960" 148.5 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync
    ModeLine "1280x1024" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
    ModeLine "1280x1024" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
    ModeLine "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync
    ModeLine "1600x1200" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    ModeLine "1600x1200" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    ModeLine "1600x1200" 189.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    ModeLine "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    ModeLine "1600x1200" 229.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    ModeLine "1792x1344" 204.8 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync
    ModeLine "1792x1344" 261.0 1792 1888 2104 2456 1344 1345 1348 1417 -hsync +vsync
    ModeLine "1856x1392" 218.3 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync
    ModeLine "1856x1392" 288.0 1856 1984 2208 2560 1392 1393 1396 1500 -hsync +vsync
    ModeLine "1920x1440" 234.0 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync
    ModeLine "1920x1440" 297.0 1920 2064 2288 2640 1440 1441 1444 1500 -hsync +vsync
    ModeLine "1800x1440" 230.0 1800 1896 2088 2392 1440 1441 1444 1490 +hsync +vsync
    ModeLine "1800x1440" 250.0 1800 1896 2088 2392 1440 1441 1444 1490 +hsync +vsync
    ModeLine "640x480" 43.2 640 680 744 848 480 481 484 509 -hsync +vsync
    ModeLine "768x576" 35.0 768 792 872 976 576 577 580 597 -hsync +vsync
    ModeLine "768x576" 42.9 768 800 880 992 576 577 580 601 -hsync +vsync
    ModeLine "768x576" 45.5 768 808 888 1008 576 577 580 602 -hsync +vsync
    ModeLine "768x576" 51.8 768 808 888 1008 576 577 580 605 -hsync +vsync
    ModeLine "768x576" 62.6 768 816 896 1024 576 577 580 611 -hsync +vsync
    ModeLine "800x600" 68.2 800 848 936 1072 600 601 604 636 -hsync +vsync
    ModeLine "1024x768" 113.3 1024 1096 1208 1392 768 769 772 814 -hsync +vsync
    ModeLine "1152x864" 81.6 1152 1216 1336 1520 864 865 868 895 -hsync +vsync
    ModeLine "1152x864" 119.7 1152 1224 1352 1552 864 865 868 907 -hsync +vsync
    ModeLine "1152x864" 143.5 1152 1232 1360 1568 864 865 868 915 -hsync +vsync
    ModeLine "1280x960" 124.5 1280 1368 1504 1728 960 961 964 1001 -hsync +vsync
    ModeLine "1280x960" 129.9 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync
    ModeLine "1280x960" 179.0 1280 1376 1520 1760 960 961 964 1017 -hsync +vsync
    ModeLine "1280x1024" 191.0 1280 1376 1520 1760 1024 1025 1028 1085 -hsync +vsync
    ModeLine "1400x1050" 122.6 1400 1488 1640 1880 1050 1051 1054 1087 -hsync +vsync
    ModeLine "1400x1050" 149.3 1400 1496 1648 1896 1050 1051 1054 1094 -hsync +vsync
    ModeLine "1400x1050" 155.8 1400 1496 1648 1896 1050 1051 1054 1096 -hsync +vsync
    ModeLine "1400x1050" 179.3 1400 1504 1656 1912 1050 1051 1054 1103 -hsync +vsync
    ModeLine "1400x1050" 214.4 1400 1512 1664 1928 1050 1051 1054 1112 -hsync +vsync
    ModeLine "1600x1200" 280.6 1600 1728 1904 2208 1200 1201 1204 1271 -hsync +vsync
    Option "DPMS" "true" #"# HorizSync 28.0 - 78.0 # Warning: This may fry very old Monitors"
    EndSection
    Section "Monitor"
    Identifier "aticonfig-Monitor[0]-0"
    Option "VendorName" "ATI Proprietary Driver"
    Option "ModelName" "Generic Autodetecting Monitor"
    Option "DPMS" "true"
    EndSection
    Section "Device"
    Identifier "aticonfig-Device[0]-0"
    Driver "fglrx"
    BusID "PCI:1:0:0"
    EndSection
    Section "Screen"
    Identifier "aticonfig-Screen[0]-0"
    Device "aticonfig-Device[0]-0"
    Monitor "Panel"
    DefaultDepth 24
    SubSection "Display"
    Viewport 0 0
    Depth 24
    EndSubSection
    EndSection
    Section "DRI"
    Mode 0666
    EndSection
    I just switched to Arch from Debian a few weeks ago, and I had fglrx working with my Debian install, but I'm not really great at configuring Xorg, so I just don't want to break X again.
    /var/log/Xorg.log.0
    This is a pre-release version of the X server from The X.Org Foundation.
    It is not supported in any way.
    Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
    Select the "xorg" product for bugs you find in this release.
    Before reporting bugs in pre-release versions please check the
    latest version in the X.Org Foundation git repository.
    See http://wiki.x.org/wiki/GitPage for git access instructions.
    X.Org X Server 1.6.1.901 (1.6.2 RC 1)
    Release Date: 2009-5-8
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.29-ARCH x86_64
    Current Operating System: Linux orion 2.6.29-ARCH #1 SMP PREEMPT Wed May 20 06:42:43 UTC 2009 x86_64
    Build Date: 28 May 2009 08:24:17PM
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jun 1 16:24:31 2009
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) ServerLayout "Xorg Configured"
    (**) |-->Screen "aticonfig-Screen[0]-0" (0)
    (**) | |-->Monitor "Panel"
    (**) | |-->Device "aticonfig-Device[0]-0"
    (**) |-->Input Device "Keyboard0"
    (**) |-->Input Device "Touchpad"
    (**) Option "AllowMouseOpenFail" "true"
    (**) Option "AutoAddDevices" "False"
    (**) Not automatically adding devices
    (==) Automatically enabling devices
    (WW) The directory "/usr/share/fonts/PEX" does not exist.
    Entry deleted from font path.
    (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/cyrillic".
    Entry deleted from font path.
    (Run 'mkfontdir' on "/usr/share/fonts/cyrillic").
    (WW) The directory "/usr/share/fonts/ttf/western" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/ttf/decoratives" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/truetype" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/truetype/openoffice" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/truetype/ttf-bitstream-vera" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/latex-ttf-fonts" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/defoma/CID" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/defoma/TrueType" does not exist.
    Entry deleted from font path.
    (**) FontPath set to:
    /usr/share/fonts/misc:unscaled,
    /usr/share/fonts/misc,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/75dpi,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/100dpi,
    /usr/share/fonts/Type1,
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1,
    built-ins
    (**) ModulePath set to "/usr/lib/xorg/modules"
    (II) No default mouse found, adding one
    (**) |-->Input Device "<default pointer>"
    (II) Loader magic: 0x3540
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 5.0
    X.Org XInput driver : 4.0
    X.Org Server Extension : 2.0
    (II) Loader running on linux
    (++) using VT number 7
    (--) PCI:*(0@1:0:0) ATI Technologies Inc Mobility Radeon HD 3400 Series rev 0, Mem @ 0xd0000000/268435456, 0xcfff0000/65536, I/O @ 0x00002000/256, BIOS @ 0x????????/131072
    (II) Open ACPI successful (/var/run/acpid.socket)
    (II) System resource ranges:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
    (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    (II) "record" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dri2" will be loaded by default.
    (II) LoadModule: "ddc"
    (II) Module "ddc" already built-in
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.6.1.901, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 7.4.0, module version = 1.0.0
    (II) Loading extension XFree86-DRI
    (II) Loading sub module "fglrxdrm"
    (II) LoadModule: "fglrxdrm"
    (II) Loading /usr/lib/xorg/modules/linux//libfglrxdrm.so
    (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
    compiled for 1.4.99.906, module version = 8.60.3
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.6.1.901, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Module glx: vendor="X.Org Foundation"
    compiled for 7.4.0, module version = 1.0.0
    (II) Loading extension GLX
    (II) LoadModule: "type1"
    (WW) Warning, couldn't open module type1
    (II) UnloadModule: "type1"
    (EE) Failed to load module "type1" (module does not exist, 0)
    (II) LoadModule: "freetype"
    (WW) Warning, couldn't open module freetype
    (II) UnloadModule: "freetype"
    (EE) Failed to load module "freetype" (module does not exist, 0)
    (II) LoadModule: "record"
    (II) Loading /usr/lib/xorg/modules/extensions//librecord.so
    (II) Module record: vendor="X.Org Foundation"
    compiled for 1.6.1.901, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension RECORD
    (II) LoadModule: "synaptics"
    (II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
    (II) Module synaptics: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.1.2
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
    (II) LoadModule: "dri2"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
    (II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.6.1.901, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DRI2
    (II) LoadModule: "fglrx"
    (II) Loading /usr/lib/xorg/modules/drivers//fglrx_drv.so
    (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
    compiled for 1.4.99.906, module version = 8.60.3
    Module class: X.Org Video Driver
    (II) LoadModule: "kbd"
    (II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
    (II) Module kbd: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.3.2
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
    (II) LoadModule: "synaptics"
    (II) Reloading /usr/lib/xorg/modules/input//synaptics_drv.so
    (II) LoadModule: "mouse"
    (II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
    (II) Module mouse: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.4.0
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
    (II) Primary Device is: PCI 01@00:00:0
    (WW) Falling back to old probe method for fglrx
    (II) ATI Proprietary Linux Driver Version Identifier:8.60.3
    (II) ATI Proprietary Linux Driver Release Identifier: 8.602
    (II) ATI Proprietary Linux Driver Build Date: Apr 1 2009 15:01:03
    (II) Loading PCS database from /etc/ati/amdpcsdb
    (WW) This ATI Proprietary Linux Driver does not guarantee support of video driver ABI higher than 2.0
    (WW) Video driver ABI version of the X server is 5.0
    (--) Chipset Supported AMD Graphics Processor (0x95C4) found
    (II) AMD Video driver is running on a device belonging to a group targeted for this release
    (II) AMD Video driver is signed
    (II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) fglrx(0): pEnt->device->identifier=0x1f42030
    (II) resource ranges after probing:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
    [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
    [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
    [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
    [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
    (II) Setting vga for screen 0.
    (II) fglrx(0): === [atiddxPreInit] === begin
    (II) Loading sub module "vgahw"
    (II) LoadModule: "vgahw"
    (II) Loading /usr/lib/xorg/modules//libvgahw.so
    (II) Module vgahw: vendor="X.Org Foundation"
    compiled for 1.6.1.901, module version = 0.1.0
    ABI class: X.Org Video Driver, version 5.0
    (II) fglrx(0): PCI bus 1 card 0 func 0
    (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
    (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
    (==) fglrx(0): Default visual is TrueColor
    (**) fglrx(0): Option "DPMS" "true"
    (II) fglrx(0): 10BitPixelFormat disabled by default
    (==) fglrx(0): RGB weight 888
    (II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
    (**) fglrx(0): Gamma Correction for I is 0x06419064
    (==) fglrx(0): Gamma Correction for II is 0x06419064
    (==) fglrx(0): Buffer Tiling is ON
    (II) Loading sub module "fglrxdrm"
    (II) LoadModule: "fglrxdrm"
    (II) Reloading /usr/lib/xorg/modules/linux//libfglrxdrm.so
    (--) fglrx(0): Chipset: "ATI Mobility Radeon HD 3400 Series" (Chipset = 0x95c4)
    (--) fglrx(0): (PciSubVendor = 0x17aa, PciSubDevice = 0x210e)
    (--) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
    (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
    (--) fglrx(0): MMIO registers at 0xcfff0000
    (--) fglrx(0): I/O port at 0x00002000
    (==) fglrx(0): ROM-BIOS at 0x000c0000
    (II) Loading sub module "int10"
    (II) LoadModule: "int10"
    (II) Loading /usr/lib/xorg/modules//libint10.so
    (II) Module int10: vendor="X.Org Foundation"
    compiled for 1.6.1.901, module version = 1.0.0
    ABI class: X.Org Video Driver, version 5.0
    (II) fglrx(0): Primary V_BIOS segment is: 0xc000
    (II) Loading sub module "vbe"
    (II) LoadModule: "vbe"
    (II) Loading /usr/lib/xorg/modules//libvbe.so
    (II) Module vbe: vendor="X.Org Foundation"
    compiled for 1.6.1.901, module version = 1.1.0
    ABI class: X.Org Video Driver, version 5.0
    (II) fglrx(0): VESA BIOS detected
    (II) fglrx(0): VESA VBE Version 3.0
    (II) fglrx(0): VESA VBE Total Mem: 16384 kB
    (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
    (II) fglrx(0): VESA VBE OEM Software Rev: 10.88
    (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
    (II) fglrx(0): VESA VBE OEM Product: M82
    (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
    (II) fglrx(0): ATI Video BIOS revision 9 or later detected
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenByBusid: Searching for BusID PCI:1:0:0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenByBusid: drmOpenMinor returns 11
    drmOpenByBusid: drmGetBusid reports PCI:1:0:0
    (II) fglrx(0): Using adapter: 1:0.0.
    (--) fglrx(0): Video RAM: 262144 kByte, Type: DDR3
    (II) fglrx(0): [FB] MC range(MCFBBase = 0xc0000000, MCFBSize = 0x10000000)
    (II) fglrx(0): PCIE card detected
    (--) fglrx(0): Using per-process page tables (PPPT) as GART.
    (WW) fglrx(0): board is an unknown third party board, chipset is supported
    (II) fglrx(0): RandR 1.2 support is enabled!
    (II) fglrx(0): RandR 1.2 rotation support is enabled!
    (II) Loading sub module "ddc"
    (II) LoadModule: "ddc"
    (II) Module "ddc" already built-in
    (II) Loading sub module "ddc"
    (II) LoadModule: "ddc"
    (II) Module "ddc" already built-in
    (II) fglrx(0): ***Display: ConnectedDisplayTypes=0x00000002, disabled=0x00000000
    (II) fglrx(0): Connected Display1: LCD on internal LVDS [lvds]
    (II) fglrx(0): Display1 EDID data ---------------------------
    (II) fglrx(0): Manufacturer: LEN Model: 4036 Serial#: 0
    (II) fglrx(0): Year: 2008 Week: 0
    (II) fglrx(0): EDID Version: 1.3
    (II) fglrx(0): Digital Display Input
    (II) fglrx(0): Max Image Size [cm]: horiz.: 30 vert.: 19
    (II) fglrx(0): Gamma: 2.20
    (II) fglrx(0): DPMS capabilities: StandBy Suspend Off
    (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    (II) fglrx(0): First detailed timing is preferred mode
    (II) fglrx(0): redX: 0.571 redY: 0.340 greenX: 0.338 greenY: 0.542
    (II) fglrx(0): blueX: 0.158 blueY: 0.125 whiteX: 0.313 whiteY: 0.329
    (II) fglrx(0): Manufacturer's mask: 0
    (II) fglrx(0): Supported additional Video Mode:
    (II) fglrx(0): clock: 101.6 MHz Image Size: 304 x 190 mm
    (II) fglrx(0): h_active: 1440 h_sync: 1488 h_sync_end 1520 h_blank_end 1824 h_border: 0
    (II) fglrx(0): v_active: 900 v_sync: 903 v_sync_end 909 v_blanking: 926 v_border: 0
    (II) fglrx(0): Supported additional Video Mode:
    (II) fglrx(0): clock: 85.6 MHz Image Size: 304 x 190 mm
    (II) fglrx(0): h_active: 1440 h_sync: 1488 h_sync_end 1520 h_blank_end 1848 h_border: 0
    (II) fglrx(0): v_active: 900 v_sync: 903 v_sync_end 909 v_blanking: 926 v_border: 0
    (WW) fglrx(0): Unknown vendor-specific block f
    (II) fglrx(0): LP141WP2-TLB1
    (II) fglrx(0): EDID (in hex):
    (II) fglrx(0): 00ffffffffffff0030ae364000000000
    (II) fglrx(0): 00120103801e1378ea4b859257568a28
    (II) fglrx(0): 20505400000001010101010101010101
    (II) fglrx(0): 010101010101b027a08051841a303020
    (II) fglrx(0): 360030be100000197021a09851841a30
    (II) fglrx(0): 3020360030be100000190000000f0095
    (II) fglrx(0): 0a32950a28191900320c3c01000000fe
    (II) fglrx(0): 004c503134315750322d544c4231001f
    (II) fglrx(0): End of Display1 EDID data --------------------
    (II) fglrx(0): Output LCD using monitor section Panel
    (II) fglrx(0): Output DFP1 has no monitor section
    (II) fglrx(0): Output CRT1 has no monitor section
    (II) fglrx(0): EDID vendor "LEN", prod id 16438
    (II) fglrx(0): Printing DDC gathered Modelines:
    (II) fglrx(0): Modeline "1440x900"x0.0 101.60 1440 1488 1520 1824 900 903 909 926 -hsync -vsync (55.7 kHz)
    (II) fglrx(0): Modeline "1440x900"x0.0 85.60 1440 1488 1520 1848 900 903 909 926 -hsync -vsync (46.3 kHz)
    (II) fglrx(0): Output LCD connected
    (II) fglrx(0): Output DFP1 disconnected
    (II) fglrx(0): Output CRT1 disconnected
    (II) fglrx(0): Using exact sizes for initial modes
    (II) fglrx(0): Output LCD using initial mode 1440x900
    (**) fglrx(0): Display dimensions: (300, 190) mm
    (**) fglrx(0): DPI set to (121, 192)
    (==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
    (==) fglrx(0): QBS disabled
    (==) fglrx(0): FAST_SWAP disabled
    (==) fglrx(0): PseudoColor visuals disabled
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules//libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    compiled for 1.6.1.901, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"
    (II) Module "ramdac" already built-in
    (==) fglrx(0): NoAccel = NO
    (II) Loading sub module "xaa"
    (II) LoadModule: "xaa"
    (II) Loading /usr/lib/xorg/modules//libxaa.so
    (II) Module xaa: vendor="X.Org Foundation"
    compiled for 1.6.1.901, module version = 1.2.1
    ABI class: X.Org Video Driver, version 5.0
    (==) fglrx(0): NoDRI = NO
    (==) fglrx(0): Capabilities: 0x00000000
    (==) fglrx(0): CapabilitiesEx: 0x00000000
    (==) fglrx(0): cpuFlags: 0x8000001d
    (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
    (II) fglrx(0): [pcie] 1986560 kB allocated
    (II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 65536
    (==) fglrx(0): UseFastTLS=0
    (==) fglrx(0): BlockSignalsOnLock=1
    (II) fglrx(0): Direct rendering enabled
    (II) fglrx(0): AC Adapter is used
    (II) fglrx(0): Interrupt handler installed at IRQ 32.
    (II) fglrx(0): Finished Initialize PPLIB!
    (--) Depth 24 pixmap format is 32 bpp
    (II) do I need RAC? No, I don't.
    (II) resource ranges after preInit:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
    [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
    [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
    [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
    [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
    (II) fglrx(0): driver needs X.org 1.4.x.y with x.y >= 99.906
    (WW) fglrx(0): could not detect X server version (query_status=-1)
    (II) Loading extension ATIFGLRXDRI
    (II) fglrx(0): doing DRIScreenInit
    (II) fglrx(0): DRIScreenInit for fglrx driver
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 12, (OK)
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 12, (OK)
    drmOpenByBusid: Searching for BusID PCI:1:0:0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 12, (OK)
    drmOpenByBusid: drmOpenMinor returns 12
    drmOpenByBusid: drmGetBusid reports PCI:1:0:0
    (II) fglrx(0): [drm] DRM interface version 1.0
    (II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:1:0:0"
    (II) fglrx(0): [drm] added 8192 byte SAREA at 0x2000
    (II) fglrx(0): [drm] mapped SAREA 0x2000 to 0x7ff050dab000
    (II) fglrx(0): [drm] framebuffer handle = 0x3000
    (II) fglrx(0): [drm] added 1 reserved context for kernel
    (II) fglrx(0): DRIScreenInit done
    (II) fglrx(0): Kernel Module Version Information:
    (II) fglrx(0): Name: fglrx
    (II) fglrx(0): Version: 8.60.3
    (II) fglrx(0): Date: Apr 1 2009
    (II) fglrx(0): Desc: ATI FireGL DRM kernel module
    (II) fglrx(0): Kernel Module version matches driver.
    (II) fglrx(0): Kernel Module Build Time Information:
    (II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.29-ARCH
    (II) fglrx(0): Build-Kernel MODVERSIONS: no
    (II) fglrx(0): Build-Kernel __SMP__: no
    (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
    (II) fglrx(0): [drm] register handle = 0x00004000
    (II) fglrx(0): Display width adjusted to to 1536 due to alignment constraints
    (II) fglrx(0): DRI initialization successfull!
    (II) fglrx(0): FBADPhys: 0xc0000000 FBMappedSize: 0x010bc000
    (II) fglrx(0): FBMM initialized for area (0,0)-(1536,2856)
    (II) fglrx(0): FBMM auto alloc for area (0,0)-(1536,1536) (front color buffer - assumption)
    (II) fglrx(0): Largest offscreen area available: 1536 x 1320
    (==) fglrx(0): Backing store disabled
    (II) Loading extension FGLRXEXTENSION
    (II) Loading extension ATITVOUT
    (**) fglrx(0): DPMS enabled
    (II) fglrx(0): Initialized in-driver Xinerama extension
    (**) fglrx(0): Textured Video is enabled.
    (II) LoadModule: "glesx"
    (II) Loading /usr/lib/xorg/modules//glesx.so
    (II) Module glesx: vendor="X.Org Foundation"
    compiled for 1.4.99.906, module version = 1.0.0
    (II) Loading extension GLESX
    (II) fglrx(0): GLESX enableFlags = 94
    (II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
    Screen to screen bit blits
    Solid filled rectangles
    Solid Horizontal and Vertical Lines
    Driver provided ScreenToScreenBitBlt replacement
    Driver provided FillSolidRects replacement
    (II) fglrx(0): GLESX is enabled
    (II) LoadModule: "amdxmm"
    (II) Loading /usr/lib/xorg/modules//amdxmm.so
    (II) Module amdxmm: vendor="X.Org Foundation"
    compiled for 1.4.99.906, module version = 1.0.0
    (II) Loading extension AMDXVOPL
    (II) fglrx(0): UVD2 feature is available
    (II) fglrx(0): Enable composite support successfully
    (II) fglrx(0): X context handle = 0x1
    (II) fglrx(0): [DRI] installation complete
    (==) fglrx(0): Silken mouse enabled
    (==) fglrx(0): Using HW cursor of display infrastructure!
    (==) fglrx(0): Using software cursor
    (II) fglrx(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (--) RandR disabled
    (II) Initializing built-in extension Generic Event Extension
    (II) Initializing built-in extension SHAPE
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension BIG-REQUESTS
    (II) Initializing built-in extension SYNC
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-MISC
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    (WW) AIGLX: 3D driver claims to not support visual 0x23
    (WW) AIGLX: 3D driver claims to not support visual 0x24
    (WW) AIGLX: 3D driver claims to not support visual 0x25
    (WW) AIGLX: 3D driver claims to not support visual 0x26
    (WW) AIGLX: 3D driver claims to not support visual 0x27
    (WW) AIGLX: 3D driver claims to not support visual 0x28
    (WW) AIGLX: 3D driver claims to not support visual 0x29
    (WW) AIGLX: 3D driver claims to not support visual 0x2a
    (WW) AIGLX: 3D driver claims to not support visual 0x2b
    (WW) AIGLX: 3D driver claims to not support visual 0x2c
    (WW) AIGLX: 3D driver claims to not support visual 0x2d
    (WW) AIGLX: 3D driver claims to not support visual 0x2e
    (WW) AIGLX: 3D driver claims to not support visual 0x2f
    (WW) AIGLX: 3D driver claims to not support visual 0x30
    (WW) AIGLX: 3D driver claims to not support visual 0x31
    (WW) AIGLX: 3D driver claims to not support visual 0x32
    (WW) AIGLX: 3D driver claims to not support visual 0x33
    (WW) AIGLX: 3D driver claims to not support visual 0x34
    (WW) AIGLX: 3D driver claims to not support visual 0x35
    (WW) AIGLX: 3D driver claims to not support visual 0x36
    (WW) AIGLX: 3D driver claims to not support visual 0x37
    (WW) AIGLX: 3D driver claims to not support visual 0x38
    (WW) AIGLX: 3D driver claims to not support visual 0x39
    (WW) AIGLX: 3D driver claims to not support visual 0x3a
    (WW) AIGLX: 3D driver claims to not support visual 0x3b
    (WW) AIGLX: 3D driver claims to not support visual 0x3c
    (WW) AIGLX: 3D driver claims to not support visual 0x3d
    (WW) AIGLX: 3D driver claims to not support visual 0x3e
    (WW) AIGLX: 3D driver claims to not support visual 0x3f
    (WW) AIGLX: 3D driver claims to not support visual 0x40
    (WW) AIGLX: 3D driver claims to not support visual 0x41
    (WW) AIGLX: 3D driver claims to not support visual 0x42
    (WW) AIGLX: 3D driver claims to not support visual 0x43
    (WW) AIGLX: 3D driver claims to not support visual 0x44
    (WW) AIGLX: 3D driver claims to not support visual 0x45
    (WW) AIGLX: 3D driver claims to not support visual 0x46
    (WW) AIGLX: 3D driver claims to not support visual 0x47
    (WW) AIGLX: 3D driver claims to not support visual 0x48
    (WW) AIGLX: 3D driver claims to not support visual 0x49
    (WW) AIGLX: 3D driver claims to not support visual 0x4a
    (WW) AIGLX: 3D driver claims to not support visual 0x4b
    (WW) AIGLX: 3D driver claims to not support visual 0x4c
    (WW) AIGLX: 3D driver claims to not support visual 0x4d
    (WW) AIGLX: 3D driver claims to not support visual 0x4e
    (WW) AIGLX: 3D driver claims to not support visual 0x4f
    (WW) AIGLX: 3D driver claims to not support visual 0x50
    (WW) AIGLX: 3D driver claims to not support visual 0x51
    (WW) AIGLX: 3D driver claims to not support visual 0x52
    (WW) AIGLX: 3D driver claims to not support visual 0x53
    (WW) AIGLX: 3D driver claims to not support visual 0x54
    (WW) AIGLX: 3D driver claims to not support visual 0x55
    (WW) AIGLX: 3D driver claims to not support visual 0x56
    (WW) AIGLX: 3D driver claims to not support visual 0x57
    (WW) AIGLX: 3D driver claims to not support visual 0x58
    (WW) AIGLX: 3D driver claims to not support visual 0x59
    (WW) AIGLX: 3D driver claims to not support visual 0x5a
    (WW) AIGLX: 3D driver claims to not support visual 0x5b
    (WW) AIGLX: 3D driver claims to not support visual 0x5c
    (WW) AIGLX: 3D driver claims to not support visual 0x5d
    (WW) AIGLX: 3D driver claims to not support visual 0x5e
    (WW) AIGLX: 3D driver claims to not support visual 0x5f
    (WW) AIGLX: 3D driver claims to not support visual 0x60
    (WW) AIGLX: 3D driver claims to not support visual 0x61
    (WW) AIGLX: 3D driver claims to not support visual 0x62
    (WW) AIGLX: 3D driver claims to not support visual 0x63
    (WW) AIGLX: 3D driver claims to not support visual 0x64
    (WW) AIGLX: 3D driver claims to not support visual 0x65
    (WW) AIGLX: 3D driver claims to not support visual 0x66
    (WW) AIGLX: 3D driver claims to not support visual 0x67
    (WW) AIGLX: 3D driver claims to not support visual 0x68
    (WW) AIGLX: 3D driver claims to not support visual 0x69
    (WW) AIGLX: 3D driver claims to not support visual 0x6a
    (WW) AIGLX: 3D driver claims to not support visual 0x6b
    (WW) AIGLX: 3D driver claims to not support visual 0x6c
    (WW) AIGLX: 3D driver claims to not support visual 0x6d
    (WW) AIGLX: 3D driver claims to not support visual 0x6e
    (WW) AIGLX: 3D driver claims to not support visual 0x6f
    (WW) AIGLX: 3D driver claims to not support visual 0x70
    (WW) AIGLX: 3D driver claims to not support visual 0x71
    (WW) AIGLX: 3D driver claims to not support visual 0x72
    (II) AIGLX: Loaded and initialized /usr/lib/dri/fglrx_dri.so
    (II) GLX: Initialized DRI GL provider for screen 0
    (II) fglrx(0): Enable the clock gating!
    (II) fglrx(0): Setting screen physical size to 304 x 190
    (**) Option "CoreKeyboard"
    (**) Keyboard0: always reports core events
    (**) Option "Protocol" "standard"
    (**) Keyboard0: Protocol: standard
    (**) Option "AutoRepeat" "500 30"
    (**) Option "XkbRules" "xorg"
    (**) Keyboard0: XkbRules: "xorg"
    (**) Option "XkbModel" "pc105"
    (**) Keyboard0: XkbModel: "pc105"
    (**) Option "XkbLayout" "us"
    (**) Keyboard0: XkbLayout: "us"
    (WW) Option "XkbVariant" requires an string value
    (**) Option "CustomKeycodes" "off"
    (**) Keyboard0: CustomKeycodes disabled
    (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
    (II) Synaptics touchpad driver version 1.1.2
    (--) Touchpad auto-dev sets device to /dev/input/event11
    (**) Option "Device" "/dev/input/event11"
    (II) Touchpad: x-axis range 1472 - 5472
    (II) Touchpad: y-axis range 1408 - 4448
    (II) Touchpad: pressure range 0 - 255
    (II) Touchpad: finger width range 0 - 0
    (II) Touchpad: buttons: left right middle
    (**) Option "SHMConfig" "on"
    (**) Option "LeftEdge" "1632"
    (**) Option "RightEdge" "5312"
    (**) Option "TopEdge" "1575"
    (**) Option "BottomEdge" "4281"
    (**) Option "FingerLow" "25"
    (**) Option "FingerHigh" "30"
    (**) Option "MaxTapTime" "180"
    (**) Option "MaxTapMove" "220"
    (**) Option "EmulateTwoFingerMinZ" "0"
    (**) Option "VertScrollDelta" "100"
    (**) Option "VertEdgeScroll" "on"
    (**) Option "HorizEdgeScroll" "on"
    (**) Option "VertTwoFingerScroll" "on"
    (**) Option "HorizTwoFingerScroll" "on"
    (**) Option "MinSpeed" "0.20"
    (**) Option "MaxSpeed" "1.00"
    (**) Option "AccelFactor" "0.0020"
    (--) Touchpad: touchpad found
    (**) Option "AlwaysCore"
    (**) Option "SendCoreEvents" "true"
    (**) Option "CorePointer"
    (**) Touchpad: always reports core events
    (II) XINPUT: Adding extended input device "Touchpad" (type: TOUCHPAD)
    (**) Touchpad: (accel) keeping acceleration scheme 1
    (**) Touchpad: (accel) filter chain progression: 2.00
    (**) Touchpad: (accel) filter stage 0: 20.00 ms
    (**) Touchpad: (accel) set acceleration profile 0
    (--) Touchpad: touchpad found
    (WW) <default pointer>: No Device specified, looking for one...
    (II) <default pointer>: Setting Device option to "/dev/input/mice"
    (--) <default pointer>: Device: "/dev/input/mice"
    (==) <default pointer>: Protocol: "Auto"
    (**) Option "AlwaysCore"
    (**) <default pointer>: always reports core events
    (==) <default pointer>: Emulate3Buttons, Emulate3Timeout: 50
    (**) <default pointer>: ZAxisMapping: buttons 4 and 5
    (**) <default pointer>: Buttons: 9
    (**) <default pointer>: Sensitivity: 1
    (II) XINPUT: Adding extended input device "<default pointer>" (type: MOUSE)
    (**) <default pointer>: (accel) keeping acceleration scheme 1
    (**) <default pointer>: (accel) filter chain progression: 2.00
    (**) <default pointer>: (accel) filter stage 0: 20.00 ms
    (**) <default pointer>: (accel) set acceleration profile 0
    (II) <default pointer>: Setting mouse protocol to "ExplorerPS/2"
    (II) <default pointer>: ps2EnableDataReporting: succeeded
    (II) fglrx(0): Restoring recent mode: 1440x900@50Hz
    swlDalGetDisplayIndex:ERROR: The number of Active Displays is 0
    swlDalGetDisplayIndex:ERROR: The number of Active Displays is 0
    (II) config/hal: Adding input device ThinkPad Extra Buttons
    (EE) config/hal: NewInputDeviceRequest failed (8)
    (II) config/hal: Adding input device TPPS/2 IBM TrackPoint
    (EE) config/hal: NewInputDeviceRequest failed (8)
    (II) config/hal: Adding input device Macintosh mouse button emulation
    (EE) config/hal: NewInputDeviceRequest failed (8)
    (II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
    (EE) config/hal: NewInputDeviceRequest failed (8)
    (II) config/hal: Adding input device AT Translated Set 2 keyboard
    (EE) config/hal: NewInputDeviceRequest failed (8)
    (II) config/hal: Adding input device Video Bus
    (EE) config/hal: NewInputDeviceRequest failed (8)
    (II) fglrx(0): EDID vendor "LEN", prod id 16438
    (II) fglrx(0): Printing DDC gathered Modelines:
    (II) fglrx(0): Modeline "1440x900"x0.0 101.60 1440 1488 1520 1824 900 903 909 926 -hsync -vsync (55.7 kHz)
    (II) fglrx(0): Modeline "1440x900"x0.0 85.60 1440 1488 1520 1848 900 903 909 926 -hsync -vsync (46.3 kHz)
    (II) fglrx(0): EDID vendor "LEN", prod id 16438
    (II) fglrx(0): Printing DDC gathered Modelines:
    (II) fglrx(0): Modeline "1440x900"x0.0 101.60 1440 1488 1520 1824 900 903 909 926 -hsync -vsync (55.7 kHz)
    (II) fglrx(0): Modeline "1440x900"x0.0 85.60 1440 1488 1520 1848 900 903 909 926 -hsync -vsync (46.3 kHz)
    (II) fglrx(0): EDID vendor "LEN", prod id 16438
    (II) fglrx(0): Printing DDC gathered Modelines:
    (II) fglrx(0): Modeline "1440x900"x0.0 101.60 1440 1488 1520 1824 900 903 909 926 -hsync -vsync (55.7 kHz)
    (II) fglrx(0): Modeline "1440x900"x0.0 85.60 1440 1488 1520 1848 900 903 909 926 -hsync -vsync (46.3 kHz)
    (II) fglrx(0): EDID vendor "LEN", prod id 16438
    (II) fglrx(0): Printing DDC gathered Modelines:
    (II) fglrx(0): Modeline "1440x900"x0.0 101.60 1440 1488 1520 1824 900 903 909 926 -hsync -vsync (55.7 kHz)
    (II) fglrx(0): Modeline "1440x900"x0.0 85.60 1440 1488 1520 1848 900 903 909 926 -hsync -vsync (46.3 kHz)
    (II) config/hal: Adding input device Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)
    (EE) config/hal: NewInputDeviceRequest failed (8)
    (II) 3rd Button detected: disabling emulate3Button
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    (II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
    Thanks a bunch for any suggestions, xorg.conf can be a bit confusing for me.
    Last edited by atrium (2009-06-02 10:20:56)

    iphitus wrote:
    Could be dpi.
    What are you using to login?
    if it's startx, you can do startx -- -dpi 96
    if it's a login manager, you'll need to edit it's configuration and set it otherwise.
    Thanks for the quick reply.  I'm starting slim as a daemon at bootup inside /etc/rc.conf, then using XFCE4.

  • DELUGE_USER option in /etc/conf.d/deluged and deluge v1.3.4-2

    I did an upgrade to deluge v1.3.4-2 today and in that version it seems that the DELUGE_USER option in /etc/conf.d/deluged isnt used anymore. Is that the case?
    If thats the case then how do run deluge as another user?
    Im following this bug:
    https://bugs.archlinux.org/task/28847

    Same situation here...
    User deluge has been hardcoded into the initscript, changing the user deluge both in deluged and deluge-web script restore the wanted behaviour....
    As per the error messages of kill, they are generate because the mainteinar changed the behaviour of the script.
    Before the update, the stop section removed the pid from /run/deluge
    Now the script does not remove the pid file, it tries to overwrite the pid value inside with the new value.
    But still this section puzzles me:
    PIDFILE=/run/deluge/deluged.pid
    OPTIONS="-P $PIDFILE $OPTIONS"
    [[ -f $PIDFILE ]] && PID=$(<$PIDFILE)
    kill -0 $PID || PID=
    Because:
    - Why test if the pidfile is a regular file? (-f flag)...imho sure that it is, no one touch it except for deluged main program and now that the script has been modified the file is not removed and recreated anymore during any operation
    - Why always try to kill the process?? That brings the error message of kills in two situations: when the program is first started and deluged.pid does not exists, and during restart operation, where kill cannot find the process since in the pidfile there is still the old pid value and the process has been killed by this section during the stop operation. Imho the kill should be performed in the stop section and not in the header. Or delete the pidfile during stop operation, and check for the existance of file before grabbing the pid value and kill it. What's the behaviour of the new version of deluged when you pass as an argument the pidfile? It creates the file if does not exists or requires that the file exists?

  • Dhcpcd overriding /etc/resolv.conf, 'nohook resolv.conf' [solved]

    hello.
    I set dhcpcd not to override the /etc/resolv.conf file:
    [root@ jenia]# cat /etc/dhcpcd.conf
    # A hook script is provided to lookup the hostname if not set by the DHCP
    # server, but it should not be run by default.
    nohook lookup-hostname
    noipv4ll
    nohook resolv.conf <----------------------------------------------------------------------------
    However, this has no effect:
    [root@ jenia]# cat /etc/resolv.conf
    domain members.linode.com
    nameserver 72.14.179.5
    nameserver 72.14.188.5
    nameserver 2600:3c00::2
    nameserver 2600:3c00::3
    options rotate
    [root@ jenia]# systemctl start [email protected]
    [root@ jenia]# cat /etc/resolv.conf
    # This file is managed by systemd-resolved(8). Do not edit.
    # Third party programs must not access this file directly, but
    # only through the symlink at /etc/resolv.conf. To manage
    # resolv.conf(5) in a different way, replace the symlink by a
    # static file or a different symlink.
    nameserver 8.8.8.8
    nameserver 8.8.4.4
    nameserver 2001:4860:4860::8888
    # Too many DNS servers configured, the following entries may be ignored
    nameserver 2001:4860:4860::8844
    As you can see dhcpcd ovveride the /etc/resolv.conf file.
    How can I avoid this? How can I change the file and make the changes permanent.
    Thanks in advance.
    Last edited by jenia (2014-07-16 17:20:02)

    yes. exactly. i removed and used a text editor to make the necessary changes to a file of the same name (/etc/resolv.conf).
    now the changes remained.
    thanks.

  • [SOLVED] How to restore kernel image after wrong /etc/mkinitcpio.conf

    I wanted to learn a bit more about the kernel and boot, and I'm afraid I cannot start up my ArchLinux anymore.
    I updated the /etc/mkinitcpio.conf to make the boot faster (with this reference: http://kmandla.wordpress.com/2007/01/30 … initcpio/) and executed #mkinitcpio -p kernel26
    I thought that if there was any problem, I could start up with the "fallback image". Certainly, there was a problem (probably I didn´t loaded all the modules required) and when I tried the fallback image, I experimented the same problem:
    Root device '/dev/disk/by-uuid/...' doesn´t exist
    ramfs$
    In fact, both images are the same (or at least they have the same size)
    I tried the ArchLinux liveCD to recover my system. There's no recovery service, so I started up the CD-ROM, mounted my ArchLinux partitions, generated the images and copied into the /boot of my Archlinux partitions. But the same problem is still there.
    What could I do to fix it?
    Thank you in advance
    Last edited by jjjaime (2009-05-10 15:45:45)

    Thank you. I follow your instructions and it worked (perhaps it would be simpler with a "#pacman -Sy kernel26"). I didn't know the command chroot and it's really interesting.
    red_erik wrote:
    I have a similar problem, (read more in this thread), and I solve it by booting off the Live CD, and doing the following:
    (replace sda1 with your / partition)
    cd /
    mount -t ext3 /dev/sda1 /mnt
    mount -t proc proc /mnt/proc
    mount -t sysfs sys /mnt/sys
    mount -o bind /dev /mnt/dev
    chroot /mnt /bin/bash
    mkinitcpio -p kernel26
    after that, I exit chroot, unmount all of my partitions and reboot...:
    cd /
    umount -a
    exit
    cd /
    umount -a
    reboot
    hope this helps...

  • [solved]Delay mySQL startup by 30 secs in /etc/rc.conf

    Basically I use wpa_supplicant and it takes a a bit to connect, by the time /etc/rc.conf gets to the mysql startup service, mySQL cannot bind to my servers address,
    This is because wpa_supplicant probably hasn't got an IP address yet, so mySQL fails to start at bootup every time, however right after the boot I can log in and manually boot it just fine.
    Any Ideas?  Maybe delay the mysql by 30-40 seconds at boot? Anyone know how?
    Last edited by kr1zmo (2010-07-05 23:57:10)

    itsbrad212 wrote:
    You could put:
    /etc/rc.d/mysqld start
    in /etc/rc.local
    Thanks for the reply but I solved this by removing the @ before netprofiles, so that wpa_supplicant doesnt startup in the background, therefor everything else waits until wpa_supplicant is connected before it boots.
    Last edited by kr1zmo (2010-07-05 23:59:58)

  • Settings in /etc/sysctl.conf overwritten [SOLVED]

    I added a new line to /etc/sysctl.conf setting the vm.dirty_ratio to 3 (line is simply `vm.dirty_ratio = 3`).  I can invoke it by running `sysctl -p` so I know the syntax is correct.  This setting is however not loaded upon a reboot.  The systemd-sysctl.service is however kicked off just  fine and completes without errors.  I have also tried removing the line from /etc/sysctl.conf and placing it in /etc/sysctl.d/dirty.conf but again, it is not honored at boot.  What am I doing wrong?
    EDIT: The solution is in post #31 - acknowledgement to chp for pointing me to it.  Note that I also changed to topic to a more relevant one.
    Last edited by graysky (2013-08-10 12:27:41)

    Guess I'm stumped.  I just spun up an Arch VM, pasted in the /etc/sysctl.conf below and reboot it.  All the settings in the file in the VM are applied.  If Leonid's guess that something is overriding these values on my workstation, I would like to figure out what it is and shut it down.  To keep things simple, I booted into the stock ARCH kernel; here are the services I have active:
    UNIT LOAD ACTIVE SUB DESCRIPTION
    proc-sys-fs-binfmt_misc.automount loaded active waiting Arbitrary Executable File Formats File System Automo
    sys-devices-pci0000:00-0000:00:19.0-net-eno1.device loaded active plugged P8P67 Deluxe Motherboard
    sys-devices-pci0...-0000:00:1b.0-sound-card0.device loaded active plugged 7 Series/C210 Series Chipset Family High Definition
    sys-devices-pci0...6-0000:07:00.0-net-wlp7s0.device loaded active plugged AR9485 Wireless Network Adapter
    sys-devices-pci0...:0-0:0:0:0-block-sda-sda1.device loaded active plugged OCZ-VERTEX4
    sys-devices-pci0...:0-0:0:0:0-block-sda-sda2.device loaded active plugged OCZ-VERTEX4
    sys-devices-pci0...:0-0:0:0:0-block-sda-sda3.device loaded active plugged OCZ-VERTEX4
    sys-devices-pci0...et0:0:0-0:0:0:0-block-sda.device loaded active plugged OCZ-VERTEX4
    sys-devices-pci0...:0-1:0:0:0-block-sdb-sdb1.device loaded active plugged WDC_WD1001FALS-00J7B1
    sys-devices-pci0...:0-1:0:0:0-block-sdb-sdb2.device loaded active plugged WDC_WD1001FALS-00J7B1
    sys-devices-pci0...:0-1:0:0:0-block-sdb-sdb3.device loaded active plugged WDC_WD1001FALS-00J7B1
    sys-devices-pci0...:0-1:0:0:0-block-sdb-sdb4.device loaded active plugged WDC_WD1001FALS-00J7B1
    sys-devices-pci0...:0-1:0:0:0-block-sdb-sdb5.device loaded active plugged WDC_WD1001FALS-00J7B1
    sys-devices-pci0...:0-1:0:0:0-block-sdb-sdb6.device loaded active plugged WDC_WD1001FALS-00J7B1
    sys-devices-pci0...:0-1:0:0:0-block-sdb-sdb7.device loaded active plugged WDC_WD1001FALS-00J7B1
    sys-devices-pci0...et1:0:0-1:0:0:0-block-sdb.device loaded active plugged WDC_WD1001FALS-00J7B1
    sys-devices-pci0...et3:0:0-3:0:0:0-block-sr0.device loaded active plugged ATAPI_iHAS424_B
    sys-devices-platform-serial8250-tty-ttyS0.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS0
    sys-devices-platform-serial8250-tty-ttyS1.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS1
    sys-devices-platform-serial8250-tty-ttyS2.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS2
    sys-devices-platform-serial8250-tty-ttyS3.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS3
    sys-module-configfs.device loaded active plugged /sys/module/configfs
    sys-module-fuse.device loaded active plugged /sys/module/fuse
    sys-subsystem-net-devices-eno1.device loaded active plugged P8P67 Deluxe Motherboard
    sys-subsystem-net-devices-wlp7s0.device loaded active plugged AR9485 Wireless Network Adapter
    -.mount loaded active mounted /
    boot.mount loaded active mounted /boot
    dev-hugepages.mount loaded active mounted Huge Pages File System
    dev-mqueue.mount loaded active mounted POSIX Message Queue File System
    home-facade-.cache.mount loaded active mounted /home/facade/.cache
    mnt-data.mount loaded active mounted /mnt/data
    run-user-1000-gvfs.mount loaded active mounted /run/user/1000/gvfs
    scratch.mount loaded active mounted /scratch
    sys-fs-fuse-connections.mount loaded active mounted FUSE Control File System
    sys-kernel-config.mount loaded active mounted Configuration File System
    sys-kernel-debug.mount loaded active mounted Debug File System
    tmp.mount loaded active mounted Temporary Directory
    var-cache.mount loaded active mounted /var/cache
    systemd-ask-password-console.path loaded active waiting Dispatch Password Requests to Console Directory Watc
    systemd-ask-password-wall.path loaded active waiting Forward Password Requests to Wall Directory Watch
    cronie.service loaded active running Periodic Command Scheduler
    dbus.service loaded active running D-Bus System Message Bus
    fancontrol.service loaded active running Fan control daemon
    [email protected] loaded active running Getty on tty1
    gpm.service loaded active running Virtual console mouse server
    lxdm.service loaded active running LXDE Display Manager
    [email protected] loaded active exited A basic static ethernet connection using iproute
    ntpd.service loaded active running Network Time Service
    polkit.service loaded active running Authorization Manager
    psd.service loaded active exited Profile-sync-daemon
    rtkit-daemon.service loaded active running RealtimeKit Scheduling Policy Service
    systemd-journald.service loaded active running Journal Service
    systemd-logind.service loaded active running Login Service
    systemd-modules-load.service loaded active exited Load Kernel Modules
    systemd-remount-fs.service loaded active exited Remount Root and Kernel File Systems
    systemd-sysctl.service loaded active exited Apply Kernel Variables
    systemd-tmpfiles-setup.service loaded active exited Recreate Volatile Files and Directories
    systemd-udev-trigger.service loaded active exited udev Coldplug all Devices
    systemd-udevd.service loaded active running udev Kernel Device Manager
    systemd-update-utmp.service loaded active exited Update UTMP about System Reboot/Shutdown
    systemd-user-sessions.service loaded active exited Permit User Sessions
    systemd-vconsole-setup.service loaded active exited Setup Virtual Console
    udisks2.service loaded active running Disk Manager
    ufw.service loaded active exited CLI Netfilter Manager
    upower.service loaded active running Daemon for power management
    cups.socket loaded active listening CUPS Printing Service Sockets
    dbus.socket loaded active running D-Bus System Message Bus Socket
    dmeventd.socket loaded active listening Device-mapper event daemon FIFOs
    sshd.socket loaded active listening sshd.socket
    systemd-initctl.socket loaded active listening /dev/initctl Compatibility Named Pipe
    systemd-journald.socket loaded active running Journal Socket
    systemd-shutdownd.socket loaded active listening Delayed Shutdown Socket
    systemd-udevd-control.socket loaded active listening udev Control Socket
    systemd-update-utmp.service loaded active exited Update UTMP about System Reboot/Shutdown
    systemd-user-sessions.service loaded active exited Permit User Sessions
    systemd-vconsole-setup.service loaded active exited Setup Virtual Console
    udisks2.service loaded active running Disk Manager
    ufw.service loaded active exited CLI Netfilter Manager
    upower.service loaded active running Daemon for power management
    cups.socket loaded active listening CUPS Printing Service Sockets
    dbus.socket loaded active running D-Bus System Message Bus Socket
    dmeventd.socket loaded active listening Device-mapper event daemon FIFOs
    sshd.socket loaded active listening sshd.socket
    systemd-initctl.socket loaded active listening /dev/initctl Compatibility Named Pipe
    systemd-journald.socket loaded active running Journal Socket
    systemd-shutdownd.socket loaded active listening Delayed Shutdown Socket
    systemd-udevd-control.socket loaded active listening udev Control Socket
    systemd-udevd-kernel.socket loaded active running udev Kernel Socket
    basic.target loaded active active Basic System
    cryptsetup.target loaded active active Encrypted Volumes
    getty.target loaded active active Login Prompts
    graphical.target loaded active active Graphical Interface
    local-fs-pre.target loaded active active Local File Systems (Pre)
    local-fs.target loaded active active Local File Systems
    multi-user.target loaded active active Multi-User System
    network.target loaded active active Network
    paths.target loaded active active Paths
    remote-fs.target loaded active active Remote File Systems
    sockets.target loaded active active Sockets
    sound.target loaded active active Sound Card
    swap.target loaded active active Swap
    sysinit.target loaded active active System Initialization
    timers.target loaded active active Timers
    psd-resync.timer loaded active waiting Timer for Profile-sync-daemon - 1Hour
    systemd-tmpfiles-clean.timer loaded active waiting Daily Cleanup of Temporary Directories
    And...
    % systemctl list-unit-files
    UNIT FILE STATE
    proc-sys-fs-binfmt_misc.automount static
    dev-hugepages.mount static
    dev-mqueue.mount static
    proc-fs-nfsd.mount static
    proc-sys-fs-binfmt_misc.mount static
    sys-fs-fuse-connections.mount static
    sys-kernel-config.mount static
    sys-kernel-debug.mount static
    tmp.mount static
    var-lib-nfs-rpc_pipefs.mount static
    cups.path disabled
    systemd-ask-password-console.path static
    systemd-ask-password-wall.path static
    alsa-restore.service static
    alsa-state.service static
    alsa-store.service static
    arch32.service disabled
    [email protected] disabled
    avahi-daemon.service disabled
    avahi-dnsconfd.service disabled
    binfmt-support.service disabled
    blkmapd.service disabled
    canberra-system-bootup.service disabled
    canberra-system-shutdown-reboot.service disabled
    canberra-system-shutdown.service disabled
    colord.service static
    console-getty.service disabled
    console-shell.service disabled
    cronie.service enabled
    cups-browsed.service disabled
    cups.service disabled
    cupsd.service disabled
    dbus-org.freedesktop.hostname1.service static
    dbus-org.freedesktop.locale1.service static
    dbus-org.freedesktop.login1.service static
    dbus-org.freedesktop.timedate1.service static
    dbus.service static
    debug-shell.service disabled
    dhcpcd.service disabled
    [email protected] disabled
    display-manager.service enabled
    distccd.service disabled
    dkms.service disabled
    dmeventd.service static
    emergency.service static
    fancontrol.service enabled
    ftpd.service disabled
    [email protected] enabled
    [email protected] static
    gpm.service enabled
    hddtemp.service disabled
    healthd.service disabled
    initrd-cleanup.service static
    initrd-parse-etc.service static
    initrd-switch-root.service static
    initrd-udevadm-cleanup-db.service static
    ip6tables.service disabled
    iptables.service disabled
    irexec.service disabled
    krb5-kadmind.service disabled
    krb5-kdc.service disabled
    krb5-kpropd.service disabled
    [email protected] static
    lirc.service disabled
    lircm.service disabled
    lm_sensors.service disabled
    lxdm.service enabled
    mcelog.service disabled
    mpd.service disabled
    [email protected] disabled
    [email protected] disabled
    netctl-sleep.service disabled
    netctl.service disabled
    [email protected] static
    [email protected] static
    [email protected] enabled
    nfsd.service disabled
    nmbd.service disabled
    nscd.service disabled
    ntpd.service enabled
    ntpdate.service disabled
    polkit.service static
    psd-resync.service enabled
    psd.service enabled
    quotaon.service static
    rescue.service static
    rpc-gssd.service disabled
    rpc-idmapd.service disabled
    rpc-mountd.service disabled
    rpc-statd.service disabled
    rpc-svcgssd.service disabled
    rpcbind.service disabled
    rsyncd.service disabled
    [email protected] static
    rtkit-daemon.service disabled
    samba.service disabled
    sensord.service disabled
    [email protected] static
    smartd.service disabled
    smbd.service disabled
    [email protected] static
    snmpd.service disabled
    snmptrapd.service disabled
    speech-dispatcherd.service disabled
    sshd.service disabled
    [email protected] static
    sshdgenkeys.service static
    svnserve.service disabled
    [email protected] static
    systemd-ask-password-console.service static
    systemd-ask-password-wall.service static
    systemd-binfmt.service static
    systemd-fsck-root.service static
    [email protected] static
    systemd-halt.service static
    systemd-hibernate.service static
    systemd-hostnamed.service static
    systemd-hybrid-sleep.service static
    systemd-initctl.service static
    systemd-journal-flush.service static
    systemd-journal-gatewayd.service static
    systemd-journald.service static
    systemd-kexec.service static
    systemd-localed.service static
    systemd-logind.service static
    systemd-modules-load.service static
    [email protected] static
    systemd-poweroff.service static
    systemd-quotacheck.service static
    systemd-random-seed-load.service static
    systemd-random-seed-save.service static
    systemd-readahead-collect.service disabled
    systemd-readahead-done.service static
    systemd-readahead-drop.service disabled
    systemd-readahead-replay.service disabled
    systemd-reboot.service static
    systemd-remount-fs.service static
    systemd-shutdownd.service static
    systemd-suspend.service static
    systemd-sysctl.service static
    systemd-timedated.service static
    systemd-tmpfiles-clean.service static
    systemd-tmpfiles-setup-dev.service static
    systemd-tmpfiles-setup.service static
    systemd-udev-settle.service static
    systemd-udev-trigger.service static
    systemd-udevd.service static
    systemd-update-utmp-runlevel.service static
    systemd-update-utmp.service static
    systemd-user-sessions.service static
    systemd-vconsole-setup.service static
    udisks.service disabled
    udisks2.service static
    ufw.service enabled
    upower.service disabled
    usbmuxd.service static
    [email protected] disabled
    uuidd.service static
    vboxweb.service disabled
    vncserver.service disabled
    winbindd.service disabled
    [email protected] disabled
    [email protected] disabled
    wpa_supplicant.service disabled
    [email protected] disabled
    avahi-daemon.socket disabled
    cups.socket enabled
    dbus.socket static
    dmeventd.socket static
    git-daemon.socket disabled
    krb5-kpropd.socket disabled
    rsyncd.socket disabled
    smbd.socket disabled
    sshd.socket enabled
    swat.socket disabled
    syslog.socket static
    systemd-initctl.socket static
    systemd-journal-gatewayd.socket disabled
    systemd-journald.socket static
    systemd-shutdownd.socket static
    systemd-udevd-control.socket static
    systemd-udevd-kernel.socket static
    uuidd.socket disabled
    basic.target static
    bluetooth.target static
    cryptsetup.target static
    ctrl-alt-del.target disabled
    default.target disabled
    emergency.target static
    final.target static
    getty.target static
    graphical.target disabled
    halt.target disabled
    hibernate.target static
    hybrid-sleep.target static
    initrd-fs.target static
    initrd-root-fs.target static
    initrd-switch-root.target static
    initrd.target static
    kexec.target disabled
    local-fs-pre.target static
    local-fs.target static
    multi-user.target disabled
    network-online.target static
    network.target static
    nss-lookup.target static
    nss-user-lookup.target static
    paths.target static
    poweroff.target disabled
    printer.target static
    reboot.target disabled
    remote-fs-pre.target static
    remote-fs.target enabled
    rescue.target disabled
    rpcbind.target static
    shutdown.target static
    sigpwr.target static
    sleep.target static
    smartcard.target static
    sockets.target static
    sound.target static
    suspend.target static
    swap.target static
    sysinit.target static
    system-update.target static
    time-sync.target static
    timers.target static
    umount.target static
    psd-resync.timer static
    systemd-readahead-done.timer static
    systemd-tmpfiles-clean.timer static
    231 unit files listed.
    Last edited by graysky (2014-11-03 08:39:54)

  • [Solved]Add kernel26 to IgnorePkg in /etc/pacman.conf. Not ignored.

    Using kdemod4.3(32bit).  I re-installed kernel26-2.6.30.5-1-i686(earliest in pacman  pkg cache) and added kernel26 and kernel-headers to /etc/pacman.conf IgnorePkg but # "pacman -Syu" still asks to upgrade kernel to 2.30.6-1-i686. What do I add to that IgnorePkg to avoid kernel upgrade? Tried kernel, kernel26 and kernel26*. Adding nvidia,nvidia-utils and xorg-server to Ignorepkg give me that thee aren't upgraded(desirred result). Thanx.
    Last edited by lestoil (2009-10-08 18:08:14)

    # /etc/pacman.conf
    # See the pacman.conf(5) manpage for option and repository directives
    # GENERAL OPTIONS
    [options]
    # The following paths are commented out with their default values listed.
    # If you wish to use different paths, uncomment and update the paths.
    #RootDir     = /
    #DBPath      = /var/lib/pacman/
    #CacheDir    = /var/cache/pacman/pkg/
    #LogFile     = /var/log/pacman.log
    HoldPkg     = pacman glibc
    # If upgrades are available for these packages they will be asked for first
    SyncFirst   = pacman
    #XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
    #XferCommand = /usr/bin/curl %u > %o
    #CleanMethod = KeepInstalled
    # Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
    IgnorePkg   = nvidia nvidia-utils xorg-server 
    #IgnoreGroup =
    #NoUpgrade   =
    #NoExtract   =
    # Misc options (all disabled by default)
    #UseSyslog
    #ShowSize
    #UseDelta
    #TotalDownload
    # REPOSITORIES
    #   - can be defined here or included from another file
    #   - pacman will search repositories in the order defined here
    #   - local/custom mirrors can be added here or in separate files
    #   - repositories listed first will take precedence when packages
    #     have identical names, regardless of version number
    #   - URLs will have $repo replaced by the name of the current repo
    # Repository entries are of the format:
    #       [repo-name]
    #       Server = ServerName
    #       Include = IncludePath
    # The header [repo-name] is crucial - it must be present and
    # uncommented to enable the repo.
    # Testing is disabled by default.  To enable, uncomment the following
    # two lines.  You can add preferred servers immediately after the header,
    # and they will be used before the default mirrors.
    #[testing]
    #Include = /etc/pacman.d/mirrorlist
    #KDEmod4
    [kdemod-core]
    Server = http://mirror.rit.edu/kdemod/core/i686
    #KDEmod4
    [kdemod-extragear]
    Server = http://mirror.rit.edu/kdemod/extragear/i686
    [core]
    # Add your preferred servers here, they will be used first
    Include = /etc/pacman.d/mirrorlist
    [extra]
    # Add your preferred servers here, they will be used first
    Include = /etc/pacman.d/mirrorlist
    [community]
    # Add your preferred servers here, they will be used first
    Include = /etc/pacman.d/mirrorlist
    #Yaourt
    [archlinuxfr]
    Server = http://repo.archlinux.fr/i686
    # An example of a custom package repository.  See the pacman manpage for
    # tips on creating your own repositories.
    #[custom]
    #Server = file:///home/custompkgs
      Here is complete /etc/pacman.conf. file without the "kernel" or "kernel26" entry which doesn't work.

  • [SOLVED]Changing the KEYMAP in rc.conf

    What values are you supposed to give it so that it will change to that keymap? I'm trying to change to the 'colemak' layout, I can't seem to do so.
    If I'm already in x, this doesn't work:
    setxkbmap colemak
    but this does:
    setxkbmap us -variant colemak
    I tried both 'colemak' and 'us -variant colemak' in rc.conf, but neither works.
    Last edited by Hspasta (2012-01-07 06:40:55)

    man rc.conf wrote:
           KEYMAP=
           Defines the keymap to load with the loadkeys program on boot. Possible
           keymaps are found in /usr/share/kbd/keymaps. Please note that this
           setting is only valid for your TTYs, not any graphical window managers
           or X. KEYMAP in /etc/vconsole.conf takes precedence.
    setxkbmap is for X.
    https://wiki.archlinux.org/index.php/KEYMAP
    KEYMAP="colemak"
    should work according to the wiki.
    Edit: The man for rc.conf is in initscripts 2012.01.2-1 - in [testing] atm.
    Last edited by karol (2012-01-07 01:37:30)

  • [solved]how to stop /etc/resolv.conf keeps being overwritten ???

    no matter how many times to change the content, it keeps like that:
    # Generated by dhcpcd from eth0
    # /etc/resolv.conf.head can replace this line
    nameserver 192.168.8.1
    # /etc/resolv.conf.tail can replace this line
    so i can't add nameserver in it
    Last edited by tempo (2010-01-14 15:01:35)

    The clue is in the message, use a file called resolv.conf.head to add a nameserver to the top and resolv.conf.tail to add it to the bottom.
    It's being overwritten because you are using dhcpcd to auto configure your network settings.
    Last edited by Meyithi (2010-01-14 13:03:43)

  • [SOLVED] How Can I Stop DHCPCD from Overwriting my /etc/resolv.conf...

    Hey guys,
    For some unknown reason /etc/dhcpcd.conf continually overwrites my /etc/resolv.conf file, eventhough I set the "nohook resolv.conf" hook in /etc/dhcpcd.conf.
    This is screwing up my DNS and intermittently creating connection problems. Any of you guys know why the hook is not taking effect or how I can stop dhcpcd from overwritting this file?
    Thanks
    Last edited by w201 (2013-03-18 19:05:15)

    drcouzelis wrote:
    w201 wrote:I set the "nohook resolv.conf" hook in /etc/dhcpcd.conf.
    kaszak696 wrote:
    dhcpcd's configuration file may be edited to prevent the dhcpcd daemon from overwriting /etc/resolv.conf. To do this, add the following to the last section of /etc/dhcpcd.conf:
    nohook resolv.conf
    I don't think that information will help w201...
    I changed my DNS to the Google one (8.8.8.8 or something). That's in "resolv.conf", isn't it? I remember editing some OTHER configuration file, which is then read to create the "resolve.conf" file. There it is, in that link to the wiki, under "Use resolv.conf.head". Does that help you do what you want to do?
    There's three techniques at the wiki link, the nohook one, the resolv.conf.head one and the write-protection attribute. 

  • No Inputs in xserver(unable to access /etc/rc.conf to change startup)

    Hello everyone,
    I've installed arch on an older notebook and of all the steps I could miss, I forgot to add hal to the daemons array in /etc/rc.conf so now when arch boots up it goes directly into xserver(kde) without any input hotplugging resulting in no input from trackpad/keyboard, as well as external mouse and keyboard.
    I've tried editing /etc/rc.conf when using the arch boot cd but I get "permission denied" when trying to mount /dev/sda1,2,3,4 etc. Is there any way I can interrupt the boot process so that I can remove "kdm" from the daemons array? Or to somehow stop arch from booting into xserver? I'm somewhat new to the linux environment but I try my best to follow all and any tutorials/advice and you guys seem to have the most detailed tutorials of all the distros - way to go!
    Thanks for the help
    Last edited by geometro (2010-06-08 01:30:06)

    You need to set a different runlevel in the Grub entry. Once you have selected the entry in the boot menu, you can edit it by pressing key e. Add "3" (without to quotes) to the end of the kernel line and then Esc to exit. Then you can try to boot by pressing b.
    Runlevel 3 didnt work(still booted into xserver), but I looked up into runlevels(didnt know about them before) so I tried runlevel 1 and it worked! :P Thanks for the help!!
    "Runlevel 1 is usually for very basic commands. This is the equivalent to "safe mode" used by Windows. This level is usually only used to asses repairs or maintenance to the system. This is a single-user mode and does not allow other users to login to the machine."
    edit: typo
    Last edited by geometro (2010-06-08 05:07:58)

Maybe you are looking for

  • How do i get my music from another computer to my new laptop

    i cant ge my music from my pc to my laptop. how do i do it. i already initiated home share but its not working? help please?

  • Hyperion Reporting Studio - data not shown in "Complete book to PDF"

    Hello All, We are using Version 11.1.2 with Planning and Essbase. We have created a book with 2 reports in it. When I run a report in the book to HTML I see data displayed in my statistical accounts but when I run the complete book to PDF the stat ac

  • Change documnet name for BOR object DEVICE.

    Hi expert,                     Could You please tell me Change document object name of BOR object DEVICE for creating new entries in SWEC transaction.

  • What is the letter for?

    In object oriented programming I see alot of this situation where there is a ?method? followd by a letter. I'm new to programming and just curious what this is. The you see something like this: catch(FileNotFoundException e)I've seen it in listeners

  • HDMI 5.1 Audio

    Just in case some users don't follow the Youview community forums, there should hopefully be a new update soon for the Youview boxes. One update is looking to be 5.1 audio via HDMI