Hyperion Reporting Studio - data not shown in "Complete book to PDF"

Hello All,
We are using Version 11.1.2 with Planning and Essbase. We have created a book with 2 reports in it. When I run a report in the book to HTML I see data displayed in my statistical accounts but when I run the complete book to PDF the stat accounts are displayed as zeros. I can also retrieve the data using the Excel add-in. There are no error messages when running the book.
Has anyone seen this previously?

Similar Messages

Report Painter - data not shown at first selection

Hello,
we have a Report Painter report for cost centers.
If we start the report with normal selection the values of the cost centers are not shown at the first look.
The window on the right side only shows the sum for the whole cost center group, but if we select one single cost center the report shows
"This report has no pages. Check the following layout settings: Threshold values, Summation levels, Zero line suppression."
But there are values, but they are only shown if we switch to another cost center and then switch back.
All rows that are selected the first time show no values, at the second time the values are there.
Does anybody know the reason for this?
Thank you & regards
Britta

Hello,
starting the report with the selection of a cost center group.
This group is shown on the left side, the values in sum of the right side.
To have a detailled look on the single values of the cost centers I expand the cost center group by clicking on the small triangle, all included cost centers are now showns on the left side.
To see the value of a cost center I click on the respective cost center, on the right side the "no data" information is shown.
Clicking on the next cost center also the "no data" information is shown.
Now switch back to the first cost center on the left side and then the values are shown on the right side.

Reporting tab is not shown in the console

hi everyone
the reporting tab is not shown in the service manager console, the topology i am using is 2 servers [one for DW and the other for management server] both servers have their SQL server installed on each one, could you please tell me how i can start to get
this working or the steps i have to follow ?? isn't supposed to be working out of the box ? i have checked reporting services and they are running

Probably your report server is not pointing to the DWDATAMART database, try login to:
http://YourDWDatabase/Reports/Pages/Folder.aspx?ItemPath=%2fSystemCenter%2fServiceManager&ViewMode=List
click on DWDATAMART Connection, under connection string, do you see your DWDATAMART DB name and server name?
Antoine AL Ibry

Complete Book in PDF is not working for one report

It's strange. All of the other books run fine. If wecreate another copy of this troublesome book, still have the sameproblem. All of the reports in the book can be readindividually. Is there a limitation to the number of reportsin a book to Complete Book in PDF? Thanks

Its working now. We just kept trying to reinstall the tools and restarting indesign. On the 4th time the buttons started working. I can't explain why it finally worked, just that it is working now.

Open complete book in pdf

Is there a way, we can open directly complete book in pdf via related content link.
Thanks in advance!!
Regards,
Rahul

Hi Rahul
You can use related content to link to a book but it runs in html.
I know that you can also use related content to link to a PDF file that you have imported into the workspace by pasting the smartcut into the related content custom link. I am not sure how well you could automate the production of PDF books to a network folder and then the import of the files into workspace though, unfortunately if you run a book as a snapshot it is always in html format.
This is all on version 9.3.1, in version 11 I believe that you can add a file as an annotation to a financial report but I don't think that you can bulk upload them so I guess it woudl depend upon how many of these links you needed to create.
Hope this helps
Stuart
www.analitica.co.uk

Report data not shown

I have a report that previously worked fine. It's relatively simple tied to a stored procedure with three grouping levels and a bunch of formula fields to generate summary calculations. I changed the datasource recently and now the report shows blank. I can run the stored procedure with the values listed in the Show SQL dialog box and I get data. I can refresh the report, browse data and see the data in each field that I expect to see in the report. The display remains blank no matter what I do. I've removed all the groups and shown just details, verified the database, changed the datasource location to a fresh data connection, nothing works. I can create a brand new report, attach to the stored procedure, group and drop in data and it works, but my old report refuses to show data.
I originally spent about a day creating this report so I'm hesitant to just start from scratch. Has anyone else seen this and stumbled across a solution?

hi,
have u got any solution for this?
i am also facing exactly the same issue and i have spent almost a day doing R&D on this but no result.

Data not shown in output but was in XML(diagnostics)

Hi Gurus,
I have created a custom account analysis report for payables by editing the XLAAARPT.xml and XLAAAR01.rtf then saving both into a new file name. Then, i tried to run the custom report and it was completed normally but when i check for the output some data are not shown in it. I then click Diagnostics and View Xml button and found out that the missing data are present in the XML. had anyone experienced the same before? Please help!
Thanks,
Jayson

Duplicate post.
Is editing of XLAAARPT.XML allowed
Please update the original thread instead of creating new one.
If you are not getting any response to your original thread, please log a SR.
Thanks,
Hussein

Report Alerts are not shown on crystal server 2011

Hi,
I have created alerts on From date and To Date. The alert is shown when the difference between From Date and To Date is more than an year. It is shown properly in the crystal report designer. When I am uploading the same report to the server the alerts are not shown on the server.
Can someone help me with the same.
Thanks,
Simran

Hi Jawahar,
I have uploaded the report in CMC using Add--> Local Document.
For Alerts I have checked the Box 'Enable Alert'. Still I am not getting a Pop Up which I get in the crystal report designer. Is the Alert sent on Crystal Server by email? I have currently selected default setting in Configure Alert Notification.
Regards,
Simran

Hyperion Reporting Studio 9.3.1 Error.

Hi all,
I got an error while inserting an row in the Grid of an report. The report contains 774 rows.
The error was GridMgr: updateGridObject() Error:- 2147467259 For input string: "232"
Please suggest why did this error occur.
Any suggestions are cordially invited.
Regards,
Sam

I have unfortunately encountered the same problem today. Been using the Financial Reporting Studio for the last 2 weeks.
Observations from the problem:
1. The error only applies to one particular report (of like 10) I have written.
2. Error does not allow inserting of any lines where required BUT creates a line at the bottom of the grid AND doesn't allow deletion of the new line at the bottom of the grid ALSO causes the last line displayed to disappear ALTHOUGH I believe the last line still appears when printed (I have the line ticked as hidden).
3. Creation of new reports (grids) and insertion of lines are possible.
Affected report includes the following formatting and functions:
Formula, Data, Text, Columns and Rows Hide (from final output), conditional formats, text columns/rows as separators. Page setup is A3 and 36 rows, columns A - V used. Reporting studio version 9.3.1.325.
Kind Regards,
Matthew

Using SSRS Date Range- Data Not shown for date greater than by Analysis Services

Hello Friends,
I am using Date Range filters(Start and End Date) in my SSRS Report. The Problem is that if i am using the start date will be today, then the end date will be the future date by using Analysis Service as my Data Source, the report is not generated.
I don't know why it happens? If I give the date range filters before the current date, then the report will shown.
The problem is that the future date is not in my database. Could you please answer for this. I am struck in here,.
Table contains : 1-7-14 ,
2-7-14,
3-7-14,
If my Date Range will be 1st to 3 of 7th month, then the report shows the data.
if my date starts with 1st of the 7th month and ends in the future, then the report will not shown the 2nd and 3rd records...
Please teach me why?

Your question should be posted to the appropriate MSDN forum. This forum is for questions regarding Microsoft Certifications.

Data not shown properly

Data entered and loaded, but it doesn't appear in the grid or data forms. In the cell history and data audit the data is shown as entered and loaded. Do you know this phenomenon.

I would suggest you do a Data Extract, and see if any data is extracted. What this will also show you, is the POV.
It is not uncommon that the POV is at Entity Currency Total or similar, and as you may not have run a consolidation yet, the view feels empty. Also, set up a grid, and check the status. You should see CN flag which would indicate data has 'changed', and requires a consolidation.

Hyperion Reporting Studio 9.3.1

Any idea on how to import batch reports from previous Hyperion Reports. Currentyl, I have to import one report at a time and it is time consuming. Also, I would to know how to set up Web Forms and Data Grid in Workspace 9.3.1

I was wondering if you might know what my problem is! (Well hyperion related anyway).
I built an entire development environment for our 9.3.1 systems, including Financial Reporting. I attempted to export / import an entire zip folder full of reports; however, nothing happens on the import! When you supply the file, the status meter starts working and then it quickly ends without any success or failure message. Additionally, when I look in the folders, none of the reports have been imported. At first I thought the issue might have been related to the size of my zip file as I exported a large number of folders/reports. Unfortunately, I still receive the same issue when I try importing a much smaller file of ~10 reports.
Any thoughts as to what the issue might be?
Thanks!

Interactive report's data not displaying on the edit form.

I have an interactive report that contains 3 rows. When I click on the edit button next to one of these rows, the edit form displays the data from that row.
But when I click the edit buttons next to the other 2 report rows, I get an error message that states: "ORA-01403: no data found. Error Unable to fetch row."
I do not see why this is happening. The PK of the table involved is "Request Date", so the report's "Link Column" region sends the value "Request Date" to the item P54_Request_Date in the form page.
Any idea why this would work correctly for one of the report rows but not for the other 2?
Clearly, each of the report rows must have a value for the PK, so why would the form not be able to find the same row that the report displays? Is it a problem with the form's "Fetch Row from" process?
Thanks.

Hello:
Your problems are primarily related to in your choice of a 'Date' type as the PK for your table. The Automated Row Fetch (ARF) process uses a SQL statement similar to the one below to retrieve a record from a table select c1, c2, c3 ... from tab where PK_col = :page_item_containing_PK_value . This would work find if the the 'page_item_containing_PK_value' were of the DATE data type. However, all APEX binds are done using varchar2. This means that the 'page_containging_PK_value' needs to have the char representation of the date that matches the default date setting on your database. So the page-item needs to be something like 'DD-MON-YYYY HH24:MI'. In your case the PK item is probably being set to 'DD-MON-YYYY' and therefore the fetch fails.
Now, for the 'issue with the :' in the character representation of the date.The link on the report page uses the standard APEX URL syntax to construct the link
f?p=App:Page:Session:Request:Debug:ClearCache:itemNames:itemValues:PrinterFriendly
As you can see, the ':' acts as the separator that delineates the components that make up the APEX URL. So, having a ':' in the 'itemValues' component will make the APEX engine treat whatever follows the ':' in the value passed as a delimiter as opposed to being part of the value being passed.
Varad

Financial Reporting Studio is not visible in Start Menu in EPM 11.1.2.2

Hi
i have installed EPM 11.1.2.2.0, i tried to login to Financial reporting studio and found that it was not installed. Then i manually installed Financial Reporting studio (V31859-01\FinancialReportingStudio\FinancialReportingStudio.exe). I did not receive any error, but i am not able to view Financial Reporting Studio listed in start menu. Where is Financial Reporting studio? how do i login?
Thanks,
Veeru

The client and server have to be exactly the same version, it sometimes worth downloading FR studio from workspace to make sure you have the same version.
Otherwise log into Oracle support and search for "you are not authorized to use this functionality", you will see lots of results which should help you resolve the problem.
Cheers
John
http://john-goodwin.blogspot.com/

Contact Modify & Create Date not displayed in Address Book

I use the create & modify date a lot in Microsoft Outlook's contacts. Although those fields are supported and updated by the Apple Adderess Book, I can't see a way to display or sort on those in the Apple Address Book.

After several days of trying, i finally seem to have it working. What i ended up doing was exporting my backing up my addresses on another computer that still had Snow Leopard on it. I exported both as .abbu and vCards. I was then able to get the vCards into iCloud.
Problem was, i could not get them to import into Contacts in Mavericks. I could not even add the iCloud account to contacts. It would let me sign in and choose contacts, but iCloud never showed up in the accounts nor did the contacts show up in Contacts.
After trying repairing permissions and resetting the PRAM to no avail, it occured to me to delete the Address Book folder from /Library/Application Support
Once that folder was gone, i was able to add iCloud to the accounts and import the .abbu file from Address Book.
So if you did not export your Address Book contacts before updating, you will need a second computer that is still running Snow Leopard to export the contacts. Then you can delete the Address Book folder from the Library and you should then be able to import the contacts into Contacts on Mavericks.
Hope this helps.

Hyperion Reporting Studio - data not shown in "Complete book to PDF"

Similar Messages

Maybe you are looking for