[SOLVED] Creating src package when the source files must d/l manually

There's a program which requires to input some data before the GPL source can be downloaded.
http://www.csse.uwa.edu.au/cnet/download.html
When I put `source=('cnet-3.3.1.tgz')` in the PKGBUILD and put the archive in PKGBIULD's dir - it compiles and installs just fine.
However when creating a source file with `mkaurball` it puts the whole archive in the .src.tar.gz.
What do I do?
Last edited by axper (2014-06-28 12:11:58)

You should file a bug against pkgbuild-introspection , looks like mkaurball needs an extra check for archives in source array.
You could use makepkg --source for now, and upload the file that creates.
An alternative may be to edit the .src.tar.gz mkaurball created and delete the cnet*.tgz manually .
Not sure is editing .AURINFO is also needed .

Similar Messages

How do I relink my video files when the source files are located in an AVCHD folder structure?

I am using FCP X 10.1.1 and I was completely done with editing a simple multicam video for a choir track and when I was exporting it it failed. I re-opened FCPX and found that there are several missing files, when I had just been working with them just a second ago! I know about relinking video files, but when I try to locate the source files (knowing where they are), the browser will not let me select ACHD file contents to get at the video files. Also, I cannot open the Library file for my project either.
Here is a snap shot:

If it comes down to it, use clip wrap to carve your .mov files out of the SD. I am confused tho - if you were originally able to import all you needed and still have the original media ? Why can't you do it again to add other clips? To "get in" to your Library, control click on it>show paskage... but do NOT MOVE anything only copy.
Perhaps soeone else can shed light on this?

Can you create a playlist when the associated files are not present?

I want to let my friend create a playlist from songs in MY library, but from HIS computer, so I copied my Library.itl and Library.XML files to his PC to let him peruse what I have. Obviously this only lets hin VIEW the songs, NOT play them. Is there a way he can create a playlist that I can then move back to my library and put on my iPod?
I've tried dragging and dropping as well as right click>Add to Playlist, but neither method works when the files associated are not present.
Is it possible?

No. iTunes will only add media to a playlist if the media files are present.

ODI: Can I create join link between the source Files?

I have a few flat files that has foreign key relationships to each other, and I put them as source files, and try to import data to Essbase from them. and I got the error message: The source data server has no join capacilities. But if I just put all of the informations inside one flat file, the transferring is successful. It seems I cannot put "joins" on the source flat files. Please advise,thanks!

Hi,
You can join tables in your source area, even if they are flat files.
The joins will be done in a staging area, depending on the size of the files and the location of the agent you are running it can define where you want the staging area to be.
If the files are small and the joins are not complex then it can be done using the memory engine, otherwise in most circumstances I would use the power of a relational engine such as Oracle/SQL server as the staging area.
Make sure you use a staging area for the interface or you will get the error messages, also on the joins make sure they are done in the staging area, there will be an option when you highlight the join
Cheers
John
http://john-goodwin.blogspot.com/

"ABC could not be saved, because the source file could not be read" error when downloading

Almost every time I download a file, the download gets to the end and then I get this error "<filename> could not be saved, because the source file could not be read", and then the download fails.
I checked my addons and they are not the problem. This doesn't happen when I try another Firefox profile. I tried several solutions offered in "http://kb.mozillazine.org/Unable_to_save_or_download_files" but they didn't help. It's not my antivirus.
I hate to start another profile because I have my current one just the way I like it.
Please help!

You can check the file attributes of all the files in the Firefox Profile Folder to make sure that you have write permission.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
Create a new profile as a test to check if your current profile is causing the problems.
See Basic Troubleshooting: Make a new profile:
*https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

How I can diable in firefox dialog box "download error could not be saved, because the source file could not be read. " when file not downloaded

How I can diable in firefox dialog box "download error could not be saved, because the source file could not be read. " standart download manager when file not downloaded

It is possible that anti-virus software is corrupting downloaded files or is interfering otherwise.
Try to disable the real-time (live) scanning of files in your anti-virus software temporarily to see if that makes downloading work.
See:
*http://kb.mozillazine.org/Unable_to_save_or_download_files
You can try to set the browser.download.manager.scanWhenDone pref on the <b>about:config</b> page to false.
*http://kb.mozillazine.org/about:config

When I tried to update, I got this message: "/tmp/S_ku+qmL.part could not be saved, because the source file could not be read. Try again later, or contact the server administrator" What do I do???

I am running version 3.6.22 and would like to update. However when I tried to update from the Mozilla web site I got the message: "/tmp/S_ku+qmL.part could not be saved, because the source file could not be read. Try again later, or contact the server administrator"
What do I do now?? Paul Stager [email protected]

I have tried downloading the file several times and get the same message: "No data received." I have no other system problems, I navigate well to other sites, but I'm unable to download this upgrade. Any suggestions?

I get the following error when trying to open a pdf file... '*pdf.part could not be saved, because the source file could not be read"

I get the following error when trying to open a pdf file... '*pdf.part could not be saved, because the source file could not be read". I am able to open pdf files in IE and other programs.

I am encountering the same problem -- though with .qfx files from my bank. This worked fine in Firefox 31 ESR, but since upgrading to Firefox 33.0, I get the "<name>.qfx.part could not be saved, because the source file could not be read" when I attempt to download. (I should add that downloading PDF statements from the same site works fine, and that the qfx downloads work fine in IE and Chrome.)
I tried safe mode, it is still broken. Tried v34 beta, no luck. I reverted to version 31, it works again.
I guess I will stick with the older version until a solution is found...or just use an alternate browser to download my financial data.

Adobe reader will not open pdf files I have saved as, or, export as pdf to my desktop (latest Maverick). The same file does open when I am on the source website (i.e. user manuals etc.). Why?

Adobe reader will not open pdf files I have saved as, or, export as pdf to my desktop (latest Maverick). The same file does open when I am on the source website (i.e. user manuals etc.). Why?

iMac G4, Mac OS X (10.4.9)
Make sure you have the latest Adobe Reader installed for your OS.
http://www.adobe.com/support/downloads/product.jsp?platform=macintosh&product=10
Did you try using Preview. If you control click on the PDF on your desktop you can use the "open with" option.

Creating multiple records from 1 record in the source file for Import DM

Hi Experts,
Today I am working on an interface/import where I want to get the following result:
Source file contains a records like:
Account, Entity, DriverX
Sales,EntityA,ZZ
The BPC appset contains the 2 dimensions Account and Entity next to CostCenter dimension. The DriverX field in the source file is just additional information in the source file. However based on this DriverX we need to determine what CostCenter to choose but we also need to have the same record assigned to a second record in BPC.
Following my example, based on DriverX value I need to create 2 records:
Account, Entity, CostCenter,
Sales,EntityA,CC1
Sales,EntityA,CC2
I don't have a problem assigning the record to 1 CostCenter based on DriverX value but I have a problem creating my second record. Does any of you have had the same "challenge" and if so would you like to share the solution for this?
Best regards,
Johan
PS: I am working on SAP BPC, version 7.0 Microsoft version.

Hi Greg,
Many thanks for your answer. And yes this would be a solution. However I just simplified my case as the decision to create an second record and where to post is depending on more than 1 field in the source.
But I will keep it in mind, because I also can opt for a solution to store data differently in BPC fac-tabels which will help me to use script logic.
If it is not possible to create multiple records from a single records in the standard functionality in the Transformation and/or Conversion file, I have to create a custom DTSX or change my way of storing data.
Anyone else who is having an alternative idea like Greg came up with?
Please let it know!
Best regards,
Johan

I am trying to create mobile pages using the steps file new new document page from sample mobile starters jquery mobile (cdn). When "page from sample" is selected, the subsequent options are not available. This seems like a silly question, but how do I

I am trying to create mobile pages using the steps file>new>new document>page from sample>mobile starters>jquery mobile (cdn). When "page from sample" is selected, the subsequent options are not available. This seems like a silly question, but how do I acquire these options?

You can get the latest jQuery Mobile Themes directly from jQuery Mobile's web site.
https://demos.jquerymobile.com/1.1.0/docs/api/themes.html
Or roll your own with ThemeRoller
http://themeroller.jquerymobile.com/
Nancy O.

The option to create an instance of the source document from a publication

Hi,
I have a question about the attitude of Business Objects Enterprise 3.1 with creating instances with scheduled publications.
We have different publications scheduled with a deski report as source document. After running a publication always an instance is created behind the publication as a log file. If I look at the source document that was published I donu2019t see an instance. I would like to automatically create an instance of the source document when the publication ran.
In a few of my publications an instance is created on the(deski) source document when the publication ran successfully. How can I set the option to create an instance of the source document of the publication?
Thanks,
Regards,
Pieter

Create an interface. say
package MyPackage;
public Interface APlugin {
     void runPlugin();
}Then your plugin implements this interface. Then, to load and execute the interface:
try {
      Class pClass = class.forName(className);
       APlugin plugin = (APlugin) pClass.newInstance();
        plugin.runPlugin();
   catch(ClassNotFoundException e) {
        .... plugin not found
   } catch(ClassCastException e) {
        .... plugin class found but doesn't implement APlugin
    } catch(InstantiationException e) {
        ... plugin badly defined e.g. doesn't have no-arg constructor
    } catch(IllegalAccessException e) {
        ... plugin or it's constructor not public
     }

Folio Builder: An error has occurred opening the source file for the article layout.

I have been working on a Folio. When I sat down to work on my folio, I was instructed by indesign to update my Folio producer tools, which I did.
Since then I can no longer view any article layout from that folio in indesign. Indeed any folio that I create that does not reside on my desktop give the same problem. I can import articles, add articles and they all upload to the proper place at adobe and I can view them. But I simply cannot open them up through folio builder as I previously.
The exact error message is as below:
An error has occurred opening the source file for the article layout.
The InDesign file for the layout cannot be found.
Another strange thing that seems to be happening is that the folio will randomly reoder the articles in the folio.
I have dumped my indesign prefs, tried creating an entirely new project, made a new account and even reinstalled the entire software.
But the problem of opening an article that I have imported or added to a folio, simply not being found to open has got me stumped. I can't proceed with a major project until I can sort this out.
Can anyone help.
Many thanks
Steve
The problem initially seemed very similar to the one linked below, but I dont get the content generation error
http://forums.adobe.com/thread/901804?decorator=print&displayFullThread=true

Questions about the Adobe Digital Publishing Suite should be posted in the DPS Forum.
http://forums.adobe.com/community/dps

Logon Error:Could not retrieve the source file for Port "Main"

Hi All,
We have a port which is blocked due to structural exceptions.When i try to connect to the Exceptions folder
"Main[Exceptions]" the import manager throws an error "Logon Error:Could not retrieve the source file for port "Main".
Any help greatly appreciated

Hi ,
Thanks for your reply.
This is what I see in the log file in the exceptions folder
These are the line I see almost to the end of the log file before they complete field mappings,value addings
          <Failure ts="2008/07/22 00:10:48.326 GMT" tid="1286" entry-no="9114" operation="Create lookups" rc="0x80000001">Illegal value for parameter</Failure>
          <Timer ts="2008/07/22 00:10:48.327 GMT" tid="1286" entry-no="9115" name="Import Lookup" total="0.040819">1</Timer>
          <Trace ts="2008/07/22 00:10:48.327 GMT" tid="1286" entry-no="9116">Import of Lookup Failed.</Trace>
But when I open the same source xml file after downloading to my local folder from Exceptions Structural folder and load manually using IM i get the status as "Ready to import".
Any Help greatly appreciated

The source folder must contain a valid boot.wim file

Hi.
I have the following problem
I have downloaded MDOP2014 (en_microsoft_desktop_optimization_pack_2014_x86_x64_dvd_4130158)
I have installed the Windows Assessment and Deployment Kit (Windows ADK) for Windows 8.1 Update
And then installed MSDaRT81.exe on a Windows 8.1 (with Update) machine
I have also copied the boot.wim from the "Sources" folder from the Win8.1 ISO file.
But when I start the DaRT Recovery Image Wizard an try to point to the folder with the boot.wim file, it gives me:
"The source folder must contain a valid boot.wim file"
I have tried boot.wim files from 8.1 ent, 8.1 ent with update, server 2012 R2, server 2012 R2 with update...no go
I am using boot.wim of win 7.
Any ideas????

Hi,
I found that if you point to the root directory (not the sources folder), then it finds the correct boot.wim. Specifically, I downloaded the 8.1 Enterprise evaluation ISO, then mounted the ISO (F:). When pointing to the sources folder, it gave the same error,
but when I pointed only to F:, it worked fine.
Additionally, both in the wizard and in the article 'Creating the DaRT 8.0 Recovery Image', it states:
Specify the root path of the Windows 8 <64-bit or 32-bit> install media
Hope this helps,
David
MDOP on the Springboard Series on TechNet

[SOLVED] Creating src package when the source files must d/l manually

Similar Messages

Maybe you are looking for