[Solved]E17 crashes on video preview.

On certain types of files. Most likely is X that crashes because when i try to enlightenment_remote -restart it from a terminal i get a message about d_bus and X.
It works on .mp4 & .mkv but crashes with .ogg .mpg. Haven't tried anything else. Also crashes when i double click a .mpg file.
Any ideas.
Last edited by 89c51 (2013-02-01 20:05:22)

Hi to all.
I have a similar problem: when I pass the mouse over .avi files a tooltip appear and E17 freezes.+ù
[albi@localhost ~]$ pacman -Qs gstreamer
local/clutter-gst 2.0.2-1
GStreamer bindings for clutter
local/gst-libav 1.0.6-1
Gstreamer libav Plugin
local/gst-plugins-bad 1.0.6-1
GStreamer Multimedia Framework Bad Plugins
local/gst-plugins-base 1.0.6-1
GStreamer Multimedia Framework Base Plugins
local/gst-plugins-base-libs 1.0.6-1
GStreamer Multimedia Framework Base Plugin libraries
local/gst-plugins-good 1.0.6-1
GStreamer Multimedia Framework Good Plugins
local/gst-plugins-ugly 1.0.6-1
GStreamer Multimedia Framework Ugly Plugins
local/gstreamer 1.0.6-1
GStreamer Multimedia Framework
local/gstreamer0.10 0.10.36-1
GStreamer Multimedia Framework
local/gstreamer0.10-bad 0.10.23-3
GStreamer Multimedia Framework Bad Plugin libraries (gst-plugins-bad)
local/gstreamer0.10-bad-plugins 0.10.23-3 (gstreamer0.10-plugins)
GStreamer Multimedia Framework Bad Plugins (gst-plugins-bad)
local/gstreamer0.10-base 0.10.36-1
GStreamer Multimedia Framework Base plugin libraries
local/gstreamer0.10-base-plugins 0.10.36-1 (gstreamer0.10-plugins)
GStreamer Multimedia Framework Base Plugins (gst-plugins-base)
local/gstreamer0.10-ffmpeg 0.10.13-1 (gstreamer0.10-plugins)
Gstreamer FFMpeg Plugin
local/gstreamer0.10-good 0.10.31-1
GStreamer Multimedia Framework Good plugin libraries
local/gstreamer0.10-good-plugins 0.10.31-1 (gstreamer0.10-plugins)
GStreamer Multimedia Framework Good Plugins (gst-plugins-good)
local/gstreamer0.10-ugly 0.10.19-5
GStreamer Multimedia Framework Ugly plugin libraries
local/gstreamer0.10-ugly-plugins 0.10.19-5 (gstreamer0.10-plugins)
GStreamer Multimedia Framework Ugly Plugins (gst-plugins-ugly)
local/totem 3.6.3-2 (gnome-extra)
GNOME3 movie player based on GStreamer

Similar Messages

Lync 2013 Crashing on Video Preview

Hi,
I have a problem with a laptop where as soon as hovering over video preview lync crashes. I have updated/re-installed internal webcam drivers, graphics drivers. Ran repair on office, i'm looking to see if anyone has any other things to check?
Thanks in advance
Chris

Hi,
I suggest you collect the event logs to find the cause of this issue.
Press Win + R, type "eventvwr" in the blank box, press Enter.
Browse to Windows Logs -> Application, find if there's any error about Lync crash.
You can send the logs to us to help you analyze the problem, to protect your private information, you can send it to our email address:
[email protected]
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Adobe Premiere Pro crashes on video preview

Hello,
I was recently working on a project and had Premiere Pro opened, then I had to update my video card drivers, because I had all sort of visual glitches in my games, occasionally when watching movies and the drivers were completely crashing every now and then. At some point during the update my screen went all azure-colored and my computer was completely non-responsive, so I had to restart it, after some waiting. After which the drivers appear to have been installed correctly but when I tried to start Premiere it crashed after loading my project. After a reinstall the same thing kept on occurring, it turned out premiere can start by itself with no problems and even import video files, but the moment I put the video file on the preview window, either by dragging it or by putting it in the timeline, Premiere crashes.
My stupid video card is "SAPPHIRE VAPOR-X R9 270X 2G G5", like I said I updated the drivers, because it was causing problems, it is still uncertain if the update fixed those issues, but now I have a problem with Premiere, which was working fine before that.
I also cleared the media caches, no effect. The crash occurs with any video file, not just with my last project.
Any ideas?

Will do, however in the meantime I found out Premiere works fine if in a new project I set the rendering to be only software, without the GPU, also in all cases audio import, preview and playback are unaffected.
I was sort of hoping I could play games AND rend video, what are the chances of that?

Lync 2013 crashes when video preview or video is loading

Hey all,
For my work I have Office 365 (tried 32bit and 64bit) and this is installed on my windows 8.1 laptop of Dell. There are no problem using the software. But when I'm running lync and on purpose or by accidant go over the video icon in a conversation,
my lync freezes and after a while it wants to restart. The other microsoft voip software (Skype) does not have this issue and works perfectly. Also it is possible to open my video settings, the webcam will show everything like it should. Only hovering the
video icon in a chat is enough to make lync crash. For my work I'm really relying on lync., so I hope ther is a solution for this problem.
The webcam is a Quanta H.264 Integrate Webcam and it was working on a combination of earlier versions of windows and lync.
With some my colleagues (same laptop) running earlier version of windows there are no issues.
Is there some way to fix this problem?
thanks,

Mostly this problem is related with video driver.
Please try to update your video driver.
Lisa Zheng
TechNet Community Support

Video Preview Screen Is Black But Still hear the sound

I was having problems viewing previews for movies and videos. Itunes support kept having me re-install just Quicktime but it never solved the problemn so I started digging around the prefernces for Quicktime. Here's what I did:
1. Open Quicktime, click on edit and pick Quicktime preferences.
2. Choose the advanced mode and click on all the Direct X options.
3. Hit apply.
4. Close Quicktime and open your itunes.
This should fix it. Hope this helps anyone else who has this problem.

Thanks for this tip! It solved my black music videos preview and overall poor Quicktime performance
MacRevisited

Camera video preview - Random crashes and green screens

Hello everyone,
I am currently working on a Windows Phone 8.1 app and I need to preview video from the phone's back camera. For quite some time I've been struggling with random crashes and green screens. When these green screens appear, all camera apps become affected and
the device needs to be restarted. Occasionally the phone freezes and only recovers after battery removal. I test the app on my Lumia 620.
After some web search, I found references to the same problem by many users/developers of different apps. I'm really frustrated as I've tried many possible solutions with no avail.
Here is part of my code:
//in App.xaml.cs:
MediaCaptureInitializationSettings settings;
public static MediaCapture captureMgr;
public static bool UnableToInitializeCamera = false;
public async Task InitializeVideoCapture()
DeviceInformation backWebcam = await GetCameraDeviceInfoAsync(Windows.Devices.Enumeration.Panel.Back);
if(captureMgr!=null) captureMgr.Dispose();
captureMgr = new MediaCapture();
settings = new MediaCaptureInitializationSettings();
settings.StreamingCaptureMode = StreamingCaptureMode.Video;
settings.PhotoCaptureSource = PhotoCaptureSource.VideoPreview;
settings.AudioDeviceId = "";
if (backWebcam != null)
settings.VideoDeviceId = backWebcam.Id;
else
var _messageDialog = new MessageDialog("Back panel camera not found");
_messageDialog.Commands.Add(new UICommand("OK"));
_messageDialog.ShowAsync();
try
await captureMgr.InitializeAsync(settings);
captureMgr.SetPreviewRotation(VideoRotation.Clockwise90Degrees);
UnableToInitializeCamera = false;
catch
UnableToInitializeCamera = true;
Debug.WriteLine("HANDLED EXCEPTION: camera could not be initialized");
var _messageDialog = new MessageDialog("Unable to initialize camera");
_messageDialog.Commands.Add(new UICommand("OK"));
_messageDialog.ShowAsync();
protected override async void OnLaunched(LaunchActivatedEventArgs e)
//.... other app initialization code
await InitializeVideoCapture();
Window.Current.Activate();
private async void OnResuming(object sender, object e)
AppIsResuming = true;
FinishedCameraInitialize = false;
await Task.Delay(TimeSpan.FromSeconds(0.5));//this makes crashes less frequent
await InitializeVideoCapture();
FinishedCameraInitialize = true;
if(WasPreviewingCamera)
WasPreviewingCamera = false; //the following line allows time for SetupPage._captureElement to be assigned before video preview starts while (!SetupPage.CaptureElementSourceAssigned) await Task.Delay(TimeSpan.FromMilliseconds(1));
SetupPage.CaptureElementSourceAssigned = false;
try
Debug.WriteLine("trying to restart video preview");
await captureMgr.StartPreviewAsync();
SetupPage.PreviewingCamera = true;
catch
Debug.WriteLine("HANDLED EXCEPTION: unable to start previewing");
SetupPage.PreviewingCamera = false;
GC.Collect();
AppIsResuming = false;
private async void OnSuspending(object sender, SuspendingEventArgs e)
var deferral = e.SuspendingOperation.GetDeferral();
while (AppIsResuming) await Task.Delay(TimeSpan.FromMilliseconds(1));//prevents crash when app is suspended right after it is resumed
await CleanupCaptureResources();
TimeOfLastSuspend = DateTime.Now;
FinishedCameraInitialize = false;
GC.Collect();
deferral.Complete();
public async Task CleanupCaptureResources()
if (SetupPage.PreviewingCamera)
await captureMgr.StopPreviewAsync();
WasPreviewingCamera = true;
SetupPage.PreviewingCamera = false;
else WasPreviewingCamera = false;
if (captureMgr != null) captureMgr.Dispose();
//in SetupPage.xaml.cs
void OnSuspending(object sender, Windows.ApplicationModel.SuspendingEventArgs e)
var deferral = e.SuspendingOperation.GetDeferral();
_captureElement.Source = null;
CaptureElementSourceAssigned = false;
GC.Collect();
deferral.Complete();
private async void OnResuming(object sender, object e)
ProgressRing2.Visibility = Visibility.Visible;
ProgressRing2.IsActive = true;
while (!App.FinishedCameraInitialize) await Task.Delay(TimeSpan.FromMilliseconds(1));
App.FinishedCameraInitialize = false;
captureElement.Source = App.captureMgr;
CaptureElementSourceAssigned = true;
GC.Collect();
ProgressRing2.Visibility = Visibility.Collapsed;
ProgressRing2.IsActive = false;
Any help towards a solution will be greatly appreciated.
Thank you

I will also advice that you start by following the
Windows Store app sample.
Is this a Windows Phone app?
The crash/green screen only manifests itself when I suspend my app and switch to the default camera app (could be any other camera app perhaps). It happens roughly 1 out of 8 times. That's why I posted the suspension and resuming handlers, which I wrote
according to the msdn instructions.
I found
this page with a sample that demonstrates the MediaCapture API for Windows Phone. Some developers have reported problems similar as mine. Has Microsoft dealt with this issue?
I've spent quite a few weeks trying to investigate this problem, without actually knowing if it is my code that needs to be debugged. That's why I'm asking if other developers are facing similar problems.
Thank you
Edit: It seems that the crash/green screen can appear when suspending/switching to any app (regardless if it uses the camera or not). Also, all works fine when the app is running on the debugger.

Encore crashes dury any video preview

I just bought Encore and to my dismay it crashes during any video preview. This includes previewing the video in the Project panel, using File > Preview, and using the Monitor panel. It even happens when I just use the scrollbar, without even playing it. Is there a fix for this or did I just throw away a lot of money?
Is it possible my video card needs to be upgraded? I'd think that if the video card was too weak the video would just be choppy, not crashing the program, but I don't know much about video cards! Also, I'm on Vista. Tried running it in Windows XP compatibility mode but that didn't make a difference.

Thanks for the info! Lots of good stuff on that page! I didn't go through the whole thing, but my tests so far have led me to believe that this is the issue.
"It takes only one unexpectedly corrupt clip to cause endless problems. Make a list of all of your media clips. Play each one in an external media player and check off each one that is successful."
Although my AVI clips (they were taken using a RCA Small Wonder - http://www.mysmallwonder.com/) play fine in Windows Media Player, I do NOT get the crash if I use the WMV clips that come with Vista (C:\Users\Public\Videos\Sample Videos)
So on the simplest level, converting my AVIs to WMV or maybe just re-encoding should work for me, but I'll check my AVI codecs first with the tools listed on that page.
I figured listing my hardware was the next step if this wasn't a common problem... listing it here now but will provide everything else later if necessary.
Dell Dimension DXP061 running Windows Vista Home Premium
Processor: Intel Core2 CPU (600 @ 2.40GHz 2.39GHz)
Memory(RAM): 3070MB
System Type: 32-bit
Video Card: NVIDIA GeForce 7300 LE
Will post the culprit once I verify what it is in case others have this same issue.
Thanks John!

FCPX 10.0.3: no video preview, crash

Hi all,
I have just updated FCPX 10.0.2 to 10.0.3 and it is a disaster.
The video preview is not working anymore: when i try to view one video from my events and pass the mouse over one, i hear the video sound, the time progressing but nothing appears in the video preview. If i try to play it (using the play button), FCPX hangs. I have to kill it.
It is the same when i edit a project: no video preview at all. It is very strange.
I tried a new project, import new videos, trash the prefs, reinstall FCPX from scratch with no events no projects, even make the lion combo 10.7.3 update (I updated lion the day before)...
My FCPX is useless. Do you have any advice that may help me?
Is it possible to roll back to 10.0.2 version via the mac app store?
My config; MBP Mid2009 15" (GPU 9600MGT).
Regards,
Chris.

ANYONE???
FWIW, I seem to be having similar issues. Used 10.0.3 for the first time earlier today (under Snow Leopard, on an 8-core Mac Pro now with 24GB of RAM). Constantly losing video -- audio plays fine. Never seemed to have this problem in 10.0.2. (Lots of other problems, mind you -- just not this one.)
Found I can usually get video back by opening Playback Prefs and making a change (like switching between "use proxy media" and "use original/optimized"), then waiting 2-3 minutes while the orange bar which has now appeared over the ENTIRE timeline -- even though NO changes have been made to the timeline whatsoever -- slowly goes away.
One of the triggers for losing the video in my case seems to be letting the Timeline play through till past the end. And I say "past" the end, because there's now suddenly a weird 2-3 minute void after the final clip of video. No audio, no "gap clips", just a big stretch of nothing. I can't figure out how to get rid of it, and the fade out I'd applied long ago to the last video clip no longer works. When the playhead reaches that transition (or nears the end of the last video clip, even with the transition removed) the video just cuts to black. The audio then ends normally while the playhead just keeps going into this mysterious blank emptiness for almost 3 minutes -- at least that's how much extra black I get when I do an Export of the Project.
Naturally I've tried re-doing the end transition; and have of course made sure there is no media of any kind down at the end of timeline which might be causing this strange empty section. Even tried carefully selecting all the real clips on the Timeline and Copy/Pasting them into a whole new project. No difference. The gap at the end just reappears.
(Meantime, as others have reported, I also experienced loss of parameters on several simple titles in Projects created in 10.0.2 and updated/imported into 10.0.3. Likewise for the irrational re-re-re-re-re-re-re-re-re-re-re-re-rendering. Have not yet had time to test any of this on a newly-created 10.0.3 project, but I really do look forward to the day when the bulk of my work in FCP-X might actually involve editing, with the time spent in trouble-shooting and unpaid beta-testing perhaps reduced to just a few hours a week. A crazy idea, I know -- but I can still dream.)
John B
Toronto

E17 - No mkv video thumbnails or previews

Hi all, I'm at my wit's end trying to fix this.
When using the elementary file manager, it simply will not generate video thumbnails or video previews for .mkv files (video/x-matroska), despite doing so for .avi, .mp4, .m4v, and others.
I believe I have the necessary gstreamer packages:
pacman -Qs gstreamer
local/gstreamer0.10 0.10.36-1
GStreamer Multimedia Framework
local/gstreamer0.10-bad 0.10.23-3
GStreamer Multimedia Framework Bad Plugin libraries (gst-plugins-bad)
local/gstreamer0.10-bad-plugins 0.10.23-3 (gstreamer0.10-plugins)
GStreamer Multimedia Framework Bad Plugins (gst-plugins-bad)
local/gstreamer0.10-base 0.10.36-1
GStreamer Multimedia Framework Base plugin libraries
local/gstreamer0.10-base-plugins 0.10.36-1 (gstreamer0.10-plugins)
GStreamer Multimedia Framework Base Plugins (gst-plugins-base)
local/gstreamer0.10-ffmpeg 0.10.13-1 (gstreamer0.10-plugins)
Gstreamer FFMpeg Plugin
local/gstreamer0.10-good 0.10.31-1
GStreamer Multimedia Framework Good plugin libraries
local/gstreamer0.10-good-plugins 0.10.31-1 (gstreamer0.10-plugins)
GStreamer Multimedia Framework Good Plugins (gst-plugins-good)
local/gstreamer0.10-ugly 0.10.19-5
GStreamer Multimedia Framework Ugly plugin libraries
local/gstreamer0.10-ugly-plugins 0.10.19-5 (gstreamer0.10-plugins)
GStreamer Multimedia Framework Ugly Plugins (gst-plugins-ugly)
Also, looking in the 'File Icons Settings' menu, 'video/x-matroska' does not appear, which seems to imply that the filemanager isn't creating thumbnails/previews due to not recognising the filetype.
Any help would be much appreciated.
Last edited by breed808 (2013-02-17 05:59:40)

Interestingly, if I build the emotion package with xine support, I get sound output but no video output during the preview, and thumbnails are still not generated. Building the package with vlc support got no further results.
Last edited by breed808 (2013-02-17 07:10:16)

R3D, RED files based project showing no video preview after reinstalling CS6. Solution!

Hello Friends,
I just came across with a problem which happened with my RED R3D RAW Files shot on RED EPIC Camera and managed to solve it in a simple click after wasting many hours, so thought why not to share this on adobe forum so others can save time.
Problem was :-
I made a project in Primer pro CS6 with RED RAW R3D files and later I had to reinstall CS6. Later when I tried opening my same project which consist of R3D RED RAW files. The project opened successfully but I red files was seen but with no video preview, importing the new RED files where working fine but the old files which was imported when I made the project they where not playing at all.
Solution:-
You can select all you RED R3D Files and go to source settings, Click Reload from RMD. Problem Solved!!!
I hope this small write up will be helpful to some of you out their.
Cheers,
Saurabh Pandey.

I have verified this problem. After Effects CS6, Premiere Pro CS6, and Adobe Media Encoder CS6 experience problems with RED .r3d files on Mac OS X 10.10 Yosemite.
More specifically, the ImporterREDServer process used by these applications is failing to launch or crashing. You may be able to import and use some .r3d files for a short time, but once the ImporterREDServer process crashes, frames from imported files won't be returned, and importing new files will result in error messages.
We are investigating the problem.
This problem does not occur in the CC or CC 2014 versions of After Effects, Premiere Pro, or Adobe Media Encoder on Mac OS X 10.10 Yosemite. If you do not have access to these versions, my suggestion for workarounds are to transcode the .r3d files to a different format (ex., QuickTime with ProRes or other high quality intermediate codec) or roll back to Mac OS X 10.9.

No video Preview During Capture

Here is the scoop:
Adobe Premeire CS5
Windows 7 64bit
Canon XL2
Capturing DV NOT HDV
Canon standard device control as there is no preset listed for the XL2
Video and audio actually captures fine. I can hear audio during capture but cannot see any video.
I know there is no video preview when capturing HDV but I am capturing DV.
Again this is CS5 NOT 5.5 so .dll fix is not an option
Thanks in advance.

FIXED!
Heres how it went:
Went to Device Manager and let windows look for an updated driver for my Graphics Card (Radeon HD 4200). Windows said the most current driver was installed. It was NOT the most current driver. I went out to ATI and got the most current driver, installed, reboot and OH JOY! I get video in the capture window during preview AND during capture (of DV)!
I also let windows (device manager) look for updated drivers for sound and it said the driver was the most current. Again, it was not. so the moral of the story is...Don't trust Device Manager on current driver versions.
Hope this will help some folks out there.
Side Note*
Most of us spend hours on forums looking for answers/fixes to particular problems. Most replies I see are either in the vein of "I have that problem too" or " try this, it worked in this OTHER version or try this OTHER software" etc. If you dont have an answer/fix for the problem, dont post.
ON the flip side of that, when posting a problem you want an answer to, Give all the pertinent information in your initial question. " Premiere crashes when I plug up my camera" does NOT suffice! What version of Premiere, what camera, what OS, What kind of connection, etc.

Problems with video previews: image freezes when scrubbing (CS6)

I just installed CS6 on my computer after working with CS5.5 and I encountered a strange problem with my EOS5D Mk 2 and also Ixus 100IS footage in Bridge CS6 (actually this happens with every video).
In CS5.5 I was able to preview my mov files and scrub through them without many problems (aside from a casual crash, but hey... )
In CS6 now the video preview starts and everything seems fine, until I scrub to a later point in the video. At that point the video freezes but the sound goes on. The only way to make the video run again is to click pause and then click play again. You can imagine that scrubbing through videos isn't much fun..
Has anyone ever had a problem like that with CS6?
Since CS5.5 is still installed, I checked and found out, that in Bridge CS5.5 everything is still working fine: No video freezes there - only in CS6
I already updated to the latest graphics card driver and all updates from CS6. Does anyone have an idea what I could do?
some stats about my computer:
win7 64bit
nvidia geforce GTX 590, driver 301.42
no other video software installed
Aside from that, I also realized that video quality in the preview area isn't particularly brilliant (neither in CS5.5 nor in CS6). Since the video is scaled to the preview window size, I sometimes get scaling artefacts/moirees. Is there a way to smooth the video playback, like you could in a regular video player?

Perhaps your understanding of rendering is different than mine. I think of it more as combining edits to form a new video. Are you using rendering as the same as playback? Also, not sure how you can have a system that has only CS6 files, as files are the same for CS5.5. I must be missing something here.
Manniac described the error well "In CS6 now the video preview starts and everything seems fine, until I scrub to a later point in the video. At that point the video freezes but the sound goes on. The only way to make the video run again is to click pause and then click play again".
Believe that error is fixed as my video play OK now.

AE 2014.2 crash when switching preview panel with Matrox

I newly bought a pc with Matrox M9138 card, and using it for professional use. All works fine, except for Adobe After Effects CC 2014.2: it simply crashes when switching between the Preview-panel and Render-Cue panel.
When I look in AE preferences under Video-preview > Mercury transmit doesn't even show that there is a Matrox-card. The only option there is Adobe DV. So, I guess AE doesn't find and even makes use of my Matrox card.
Technical info:
Windows Version: 8.1
Processor: Intel Core i7-4790 CPU, 3.6 GHz
RAM: 16GB
Type: 64bits
Matrox M9138 LP PCIex16
Driver version 2.4.3.2 (4.4.3.2) for Win 8-64bit
Adobe CC After effects 2014.2
After Efects error: "Crash in progress. Last logged message was: <816><ae.blitpipe><2> Making New Context"
First I installed the Matrox driver, and then Adobe CC, but After effects crashed when switching between preview-panel and render-cue-panel (No Matrox recognition in AE preferences > Mercury transmit)
Now I did it in other order:
- I removed Adobe CC (AE included) and all parts
- Did extra checkup removal with Adobe CC cleaner
- Removed the Matrox driver
- Restarted PC
- Reinstalled Adobe CC with AE
- Reinstalled Matrox Driver
- Restarted PC
- matrox fully installed and working perfectly (no errors in Display Adapters info).
But still, After effects crashed (Still no Matrox recognition in AE preferences > Mercury transmit)
I contacted Matrox technical support, and as I suspected, they say they haven't had this problem before and all works fine.
Typical...
Does someone has an idea what the problem would be?
Help or info would be very appreciated.

Solution:
My graphics card did not supported the "Mercury Playback Engine GPU Acceleration (Open CL)". You can change it into "Mercury Playback Engine Software Only" in your Project Settings.
But this is in the wrong place in my opinion. Why not in "Edit/Preferences"? I could've changed it by myself but I did not find the menu.
Thanks Michaela from the Adobe Support Chat!

Video preview problem

Hi. I have a problem with video playback in my premiere cc. In project window I have video file imported, video is on timeline, but I can't see this video preview in program and source windows. I haven't worked a lot in premiere and I don't know where the problem is. I have already reinstalled program, but it didn't solve the problem. Can someone help me? Additionally, when I render this video, everything is fine,...problem is that, I can't see what I render

More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
•What is your exact brand/model graphics adapter (ATI or nVidia or ???)
•What is your exact graphics adapter driver version?
•Have you gone to the vendor web site to check for a newer driver?
•For Windows, do NOT rely on Windows Update to have current driver information
•-you need to go direct to the vendor web site and check updates for yourself
•nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us
•ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
Exactly what is INSIDE the video you are editing?
Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
https://forums.adobe.com/thread/1070933 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download

Mac pro HDMI video preview goes yellow solid and turns off by itself often

I work with 2 monitors. main monitor is Apple thunderbolt cinema display 27", and second monitor is LG HD tv connected through HDMI of MacPro.
when I use aftereffect, I use my LG TV as video preview, and it goes yellow solid and turns off itself very often.
I use Final Cut Pro X and, davinci 10 lite with LG TV also, but it works well in these condition.
It makes trouble with aftereffects only.
I hope it can be solved.
thank you

thank you, tim.
English is not my first language. so I'm not sure I fully understand with this.
I will show you my full hardware setting
* Does preview on the LG monitor work at all? When does it go yellow? When does it turn off?
- it works initially. A few minutes after I start making RAM preview, yellow screen appear(the RAM preview keeps going anyway),
if I stop the video preview(command + /), and restart video preview, it turns on normal,
but if I don't stop video preview, 10 or 20 seconds later it turns off by itself, and all the options in 'Output Device' disappear except 'Computer Monitor Only', so I should restart After Effects to turn on video preview.
* When you have the problem, if you open Activity Monitor, is Adobe QT32 Server running?
- yes, it(it appears red characters, is it normal?) looks running
* Do you have Premiere Pro installed? Does it have the same problem when previewing to the LG monitor?
- no, Premiere Pro works well.
- I tried to remove Blackmagic Codec.component , but it didn't solve my problem
let me know if you need more information about this.
thank you again.

[Solved]E17 crashes on video preview.

Similar Messages

Maybe you are looking for