[solved] Editing makepkg.conf (x86_64)

Hello everyone,
I just set up my first Arch 64bit-system, so I want get to know its abilities and advantages a bit better for my everyday work.
Before installing any more stuff, I'm actually editing makepkg.conf, because I'd like to have the CPU usage optimzed, though I don't expect any significant performance boost -- I just want to learn about it and then use it. So far I read the specific Wikis Arch, Gentoo, and of course the Arch64 FAQ. -- However, tuning this file would only affect compiling PKGBUILDs from the AUR, or from other sources, because I'll mostly use the precompiled packages as they are, I suppose.
The CPU is a Xeon Kentsfield, looking like an early "quad-core, appearing as a single core" to me:
Wikipedia wrote:Intel released relabeled versions of its quad-core (2x2) Core 2 Quad processor as the Xeon 3200-series (,,,), these models only support single-CPU operation ...
Four processors are found anyway:
# cat /proc/cpuinfo
processor : 0
model name : Intel(R) Xeon(R) CPU X3210 @ 2.13GHz
physical id : 0
siblings : 4
core id : 0
cpu cores : 4
processor : 1
physical id : 0
siblings : 4
core id : 2
cpu cores : 4
processor : 2
physical id : 0
siblings : 4
core id : 1
cpu cores : 4
processor : 3
physical id : 0
siblings : 4
core id : 3
cpu cores : 4
So I wonder: how would this quad-or-no-quad appear or have to be adressed in a (desktop) system monitor -- as 1, 4 or even 2 (as it also a "2x2") CPUs?
The related section of my makepkg.conf actually reads:
CARCH="x86_64"
CHOST="x86_64-unknown-linux-gnu"
CFLAGS="-march=native -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2"
CXXFLAGS="${CFLAGS}"
#MAKEFLAGS="-j2"
Well, I admit that I'm not sure that I got everything in details. But I guess with this I'd be able to use any PKBGUILD in the AUR (or provide my own that others could use without risk), right?
Last, what about the MAKEFLAGS? The wiki says,
Typically -j2, plus 1 for each additional core/processor is an adequate choice.
If the Xeon is a "real" quad-core (see above), it should rather be
MAKEFLAGS="-j5"
as in this case there are three additional cores, right?
Last edited by cameo (2012-08-19 23:56:24)

I see.
Alternatively, for i686 compiling on this very machine I probably must get to grips with this stuff (if I'm not mixing something up); well, that's a future plan.
Thanks very much anyway.
Hm, regarding that system monitoring matter, I've just a feeling, different programs could just use different hooks for showing the processor loads. I mean if that Xeon is physically a quad, but "acting" like a single, some could maybe show just 1 CPU, and others 4. -- Since my topic here is mainly about editing makepkg.conf, I'd better discuss this in detail in another thread later, if necessary. (But of course, if somebody has got some information about this, please let me know.)
Seems to me, there's nothing more for me to question here then, so I'll mark this as solved.

Similar Messages

Error after editing makepkg.conf

As the topic, I have edited my makepkg.conf in order to build via abs according to my cpu. When I try to run makpkg -csi on a pkgbuild i get this error:
==> ERROR: openbox is not available for the '' architecture.
Note that many packages may need a line added to their PKGBUILD
such as arch=('').
(there is nothing wrong with the pkgbuid in question).
My modified makepkg.conf looks like this:
# /etc/makepkg.conf
# SOURCE ACQUISITION
#-- The download utilities that makepkg should use to acquire sources
# Format: 'protocol::agent'
DLAGENTS=('ftp::/usr/bin/wget -c --passive-ftp -t 3 --waitretry=3'
'http::/usr/bin/wget -c -t 3 --waitretry=3'
'https::/usr/bin/wget -c -t 3 --waitretry=3 --no-check-certificate'
'rsync::/usr/bin/rsync -z'
'scp::/usr/bin/scp -C')
# Other common tools:
# /usr/bin/snarf
# /usr/bin/lftpget -c
# /usr/bin/curl
# ARCHITECTURE, COMPILE FLAGS
CHOST="x86_64-pc-linux-gnu"
CFLAGS="-march=athlon64 -O2 -pipe"
CXXFLAGS="${CFLAGS}"
MAKEFLAGS="-j3"
#-- Exclusive: will only run on -march=x86-64
# -march (or -mcpu) builds exclusively for an architecture
# -mtune optimizes for an architecture, but builds for whole processor family
#-- Make Flags: change this for DistCC/SMP systems
#MAKEFLAGS="-j2"
# BUILD ENVIRONMENT
# Defaults: BUILDENV=(fakeroot !distcc color !ccache !xdelta)
# A negated environment option will do the opposite of the comments below.
#-- fakeroot: Allow building packages as a non-root user
#-- distcc: Use the Distributed C/C++/ObjC compiler
#-- color: Colorize output messages
#-- ccache: Use ccache to cache compilation
#-- xdelta: Generate delta patch from previous to current package
BUILDENV=(fakeroot !distcc color !ccache !xdelta)
#-- If using DistCC, your MAKEFLAGS will also need modification. In addition,
#-- specify a space-delimited list of hosts running in the DistCC cluster.
#DISTCC_HOSTS=""
# GLOBAL PACKAGE OPTIONS
# These are default values for the options=() settings
# Default: OPTIONS=(strip !docs libtool emptydirs)
# A negated option will do the opposite of the comments below.
#-- strip: Strip symbols from binaries/libraries
#-- docs: Save doc and info directories
#-- libtool: Leave libtool (.la) files in packages
#-- emptydirs: Leave empty directories in packages
OPTIONS=(strip !docs libtool emptydirs)
#-- File integrity checks to use. Valid: md5, sha1, sha256, sha384, sha512
INTEGRITY_CHECK=(md5)
#-- Info and doc directories to remove (if option set correctly above)
DOC_DIRS=(usr/{,share/}{info,doc,gtk-doc} opt/*/{info,doc,gtk-doc})
# PACKAGE OUTPUT
# Default: put built package and cached source in build directory
#-- Destination: specify a fixed directory where all packages will be placed
#PKGDEST=/home/packages
#-- Source cache: specify a fixed directory where source files will be cached
#SRCDEST=/home/sources
#-- Source root: specify location where PKGBUILDs are located for '--builddeps'
#SRCROOT=/home/pkgbuilds
#-- Packager: name/email of the person or organization building packages
#PACKAGER="John Doe <[email protected]>"
# BUILDSCRIPT/EXTENSION DEFAULTS
# WARNING: Do NOT modify these variables unless you know what you are
# doing.
BUILDSCRIPT='PKGBUILD'
PKGEXT='.pkg.tar.gz'
SRCEXT='.src.tar.gz'
DB_COMPRESSION='gz'
DB_CHECKSUMS=(md5)
# vim: set ft=sh ts=2 sw=2 et:
ps. I have an amd athlon 64 x2.

You are missing the CARCH- field(?). Add
CARCH="x86_64"
into your makepkg.conf (it's above CHOST by default).

[solved] makepkg.conf + local path

Hi!
I would like to create two packages that are needed to run my printer (canon).
From the canon website, after long passages, I downloaded two .tar.gz packages with the necessary sources.
From wiki, I refer to the page that explains how to create the PKGBUILD, I realized that you can
also specify a local directory as url to find the source package.
To do this, however, you must edit the file makepkg.conf.
The question is: how do I change the file makepkg.conf?
Thank you!
Last edited by trevi (2011-12-29 15:19:55)

Just put the tarball names in the source= array, put the tarballs and PKGBUILD in the same dir, and run makepkg in that dir. No need to edit makepkg.conf.

Override CFLAGS and CXFLAGS from /etc/makepkg.conf [solved]

This might be a stupid question, but here goes: if I redefine variables such as CFLAGS and CXXFLAGS from within a PKGBUILD, any subsequent make would use the new ones rather than the ones defined in /etc/makepkg.conf ...right? I'm assuming that makepkg reads them once when the user invokes it.
Thanks.
Last edited by graysky (2011-01-15 11:58:58)

Thanks. I looked at /usr/bin/makepkg and I believe this is the case, but I don't know of a way to check after I compile them. Is there some place I can look within the final NAME.tar.xz to see which CFLAGS were used? (Again, I think the answer here is "no").

Not all PKGBUILDS use makepkg.conf

When bulding some packages (smplayer-svn, arora-git, qtscriptgenerator-git, qmpdclient - that's what i notticed) makepkg.conf doesn't influence.
For example for smplayer-svn I have:
g++ -c -m64 -pipe -march=x86-64 -mtune=generic -O2 -pipe -Wall -W -D_REENTRANT -DDOWNLOAD_SUBS -DDATA_PATH=\"/usr/share/smplayer\" -DDOC_PATH=\"/usr/share/doc/packages/smplayer\" -DTRANSLATION_PATH=\"/usr/share/smplayer/translations\" -DTHEMES_PATH=\"/usr/share/smplayer/themes\" -DSHORTCUTS_PATH=\"/usr/share/smplayer/shortcuts\" -DQT_NO_DEBUG -DQT_XML_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_CORE_LIB -DQT_SHARED -I/usr/share/qt/mkspecs/linux-g++-64 -I. -I/usr/include/QtCore -I/usr/include/QtNetwork -I/usr/include/QtGui -I/usr/include/QtXml -I/usr/include -Ifindsubtitles -Ivideopreview -Impcgui -Ifindsubtitles/filedownloader -Ifindsubtitles/quazip -I.moc -I.ui -o .obj/prefinterface.o prefinterface.cpp
while in makepgs.conf:
me$ cat /etc/makepkg.conf | grep -A 1 CFLAGS
CFLAGS="-march=amdfam10 -O2 -pipe"
CXXFLAGS="-march=amdfam10 -O2 -pipe"
where is the trick? Arch x86_64 with testing repo enabled.
P.S. maybe I'm wrong but they all use qmake for makefiles generation.
Last edited by vit (2009-05-19 19:26:45)

AUR pks mainteners often disables some makeflags to maintain compatibility look for options=('!makeflags') line - "!" sign before makeflags disables user-set makepkg.conf makeflags.

Question about optimizing packages int Makepkg.conf

I edited my Makepkg.conf file so that it knows that I have a Intel Core 2 Duo. Do I need to rebuild any packages? How do I go about it if I do?

Ranguvar wrote:
SkonesMickLoud wrote:
slughappy1 wrote:Isn't prescott the right config for an Intel Centrino Core 2 Duo? That's what the guide says. Although, I once tried to install Gentoo. I think I remember that someone told me that prescott is just the current form, and that for the core 2 duo it was going to change. Or something like that
Prescott is for the i686 version, Nocona is for x86_64.
Note that this is, I'm pretty sure, independent of what architecture your OS is running (32-bit vs 64-bit).
Yeah. What I meant was that if you're running i686 on your Core2Duo it's a Prescott. If you're running x86_64, it's a Nocona.

Makepkg.conf and compilation problem

Hi!
In my makepkg.conf I have:
CARCH="x86_64"
CHOST="x86_64-unknown-linux-gnu"
#-- Exclusive: will only run on -march=x86-64
# -march (or -mcpu) builds exclusively for an architecture
# -mtune optimizes for an architecture, but builds for whole processor family
CFLAGS="-march=amdfam10 -O2 -pipe" #Arch wiki says this
CXXFLAGS="${CFLAGS}"
#-- Make Flags: change this for DistCC/SMP systems
MAKEFLAGS="-j5"
and when I try to makepkg for smting (for example arora) I get:
g++ -c -m64 -pipe -march=x86-64 -mtune=generic -O2...
My gcc is 4.3.3. AMD Phenom II x4 910 processor.
Why is this two -march are different?

It's the only one package. And it fails to build every time on different files with the same error. And if I just enter ./src/arora-build and run qmake && make it does compile ok.
The error example:
.obj/moc_settings.o: file not recognized: File truncated
collect2: ld returned 1 exit status
P.S. PKGBUILD is community/arora-git
Last edited by vit (2009-05-06 18:02:36)

Problems with Yaourt and makepkg.conf

Hi all,
So, I've recently switched all the way over to Arch Linux after playing around with it for some time. And it's been great! I am very glad I did it.
I've been using yaourt to install all of my humble indie bundle games, and it's been going well until I tried to install mark of the ninja.
Every time I try to install ANYTHING on yaourt now, I get these types of error messages:
[nicholas@nicholas ~]$ yaourt -s markoftheninja-hib
1 aur/markoftheninja-hib 1.38+h20131002-1 (4)
Mark of the Ninja, a side-scrolling stealth game (Humble Bundle version)
==> Enter n° of packages to be installed (ex: 1 2 3 or 1-3)
==> -------------------------------------------------------
==> 1
/etc/makepkg.conf: line 89: for: command not found
==> Downloading markoftheninja-hib PKGBUILD from AUR...
x markoftheninja-hib.desktop
x PKGBUILD
markoftheninja-hib 1.38+h20131002-1 (Wed Sep 11 20:25:29 EDT 2013)
( Unsupported package: Potentially dangerous ! )
==> Edit PKGBUILD ? [Y/n] ("A" to abort)
==> ------------------------------------
==> n
/etc/makepkg.conf: line 89: for: command not found
==> WARNING: Running makepkg as an unprivileged user will result in non-root
ownership of the packaged files. Try using the fakeroot environment by
placing 'fakeroot' in the BUILDENV array in /etc/makepkg.conf.
==> markoftheninja-hib dependencies:
- sdl (already installed)
- libgl (already installed)
- gcc-libs (already installed)
- xdg-utils (already installed)
==> Continue building markoftheninja-hib ? [Y/n]
==> --------------------------------------------
==>
==> Building and installing package
/etc/makepkg.conf: line 89: for: command not found
==> WARNING: Running makepkg as an unprivileged user will result in non-root
ownership of the packaged files. Try using the fakeroot environment by
placing 'fakeroot' in the BUILDENV array in /etc/makepkg.conf.
==> ERROR: markoftheninja-hib is not available for the '' architecture.
Note that many packages may need a line added to their PKGBUILD
such as arch=('').
==> ERROR: Makepkg was unable to build markoftheninja-hib.
==> Restart building markoftheninja-hib ? [y/N]
==> -------------------------------------------
==>
[nicholas@nicholas ~]$ sudo gedit /etc/makepkg.conf
So, I already have fakeroot properly activated IN makepkg.conf. This is my makepkg.conf setup:
# /etc/makepkg.conf
# SOURCE ACQUISITION
#-- The download utilities that makepkg should use to acquire sources
# Format: 'protocol::agent'
DLAGENTS=('ftp::/usr/bin/curl -fC - --ftp-pasv --retry 3 --retry-delay 3 -o %o %u'
'http::/usr/bin/curl -fLC - --retry 3 --retry-delay 3 -o %o %u'
'https::/usr/bin/curl -fLC - --retry 3 --retry-delay 3 -o %o %u'
'rsync::/usr/bin/rsync --no-motd -z %u %o'
'scp::/usr/bin/scp -C %u %o'
'hib::/usr/bin/find /home/nicholas/Downloads -name $(echo %u | cut -c 7-) -exec ln -s \{\} %o \; -quit')'
# Other common tools:
# /usr/bin/snarf
# /usr/bin/lftpget -c
# /usr/bin/wget
# ARCHITECTURE, COMPILE FLAGS
CARCH="x86_64"
CHOST="x86_64-unknown-linux-gnu"
#-- Compiler and Linker Flags
# -march (or -mcpu) builds exclusively for an architecture
# -mtune optimizes for an architecture, but builds for whole processor family
CPPFLAGS="-D_FORTIFY_SOURCE=2"
CFLAGS="-march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4"
CXXFLAGS="-march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4"
LDFLAGS="-Wl,-O1,--sort-common,--as-needed,-z,relro"
#-- Make Flags: change this for DistCC/SMP systems
#MAKEFLAGS="-j2"
#-- Debugging flags
DEBUG_CFLAGS="-g -fvar-tracking-assignments"
DEBUG_CXXFLAGS="-g -fvar-tracking-assignments"
# BUILD ENVIRONMENT
# Defaults: BUILDENV=(fakeroot !distcc color !ccache check !sign)
# A negated environment option will do the opposite of the comments below.
#-- fakeroot: Allow building packages as a non-root user
#-- distcc: Use the Distributed C/C++/ObjC compiler
#-- color: Colorize output messages
#-- ccache: Use ccache to cache compilation
#-- check: Run the check() function if present in the PKGBUILD
#-- sign: Generate PGP signature file
BUILDENV=(fakeroot !distcc color !ccache check !sign)
#-- If using DistCC, your MAKEFLAGS will also need modification. In addition,
#-- specify a space-delimited list of hosts running in the DistCC cluster.
#DISTCC_HOSTS=""
#-- Specify a directory for package building.
#BUILDDIR=/tmp/makepkg
# GLOBAL PACKAGE OPTIONS
# These are default values for the options=() settings
# Default: OPTIONS=(strip docs !libtool !staticlibs emptydirs zipman purge !upx !debug)
# A negated option will do the opposite of the comments below.
#-- strip: Strip symbols from binaries/libraries
#-- docs: Save doc directories specified by DOC_DIRS
#-- libtool: Leave libtool (.la) files in packages
#-- staticlibs: Leave static library (.a) files in packages
#-- emptydirs: Leave empty directories in packages
#-- zipman: Compress manual (man and info) pages in MAN_DIRS with gzip
#-- purge: Remove files specified by PURGE_TARGETS
#-- upx: Compress binary executable files using UPX
#-- debug: Add debugging flags as specified in DEBUG_* variables
OPTIONS=(strip docs !libtool !staticlibs emptydirs zipman purge !upx !debug)
#-- File integrity checks to use. Valid: md5, sha1, sha256, sha384, sha512
INTEGRITY_CHECK=(md5)
#-- Options to be used when stripping binaries. See `man strip' for details.
STRIP_BINARIES="--strip-all"
#-- Options to be used when stripping shared libraries. See `man strip' for details.
STRIP_SHARED="--strip-unneeded"
#-- Options to be used when stripping static libraries. See `man strip' for details.
STRIP_STATIC="--strip-debug"
#-- Manual (man and info) directories to compress (if zipman is specified)
MAN_DIRS=({usr{,/local}{,/share},opt/*}/{man,info})
#-- Doc directories to remove (if !docs is specified)
DOC_DIRS=(usr/{,local/}{,share/}{doc,gtk-doc} opt/*/{doc,gtk-doc})
#-- Files to be removed from all packages (if purge is specified)
PURGE_TARGETS=(usr/{,share}/info/dir .packlist *.pod)
# PACKAGE OUTPUT
# Default: put built package and cached source in build directory
#-- Destination: specify a fixed directory where all packages will be placed
#PKGDEST=/home/packages
#-- Source cache: specify a fixed directory where source files will be cached
#SRCDEST=/home/sources
#-- Source packages: specify a fixed directory where all src packages will be placed
#SRCPKGDEST=/home/srcpackages
#-- Log files: specify a fixed directory where all log files will be placed
#LOGDEST=/home/makepkglogs
#-- Packager: name/email of the person or organization building packages
#PACKAGER="John Doe <[email protected]>"
#-- Specify a key to use for package signing
#GPGKEY=""
# COMPRESSION DEFAULTS
COMPRESSGZ=(gzip -c -f -n)
COMPRESSBZ2=(bzip2 -c -f)
COMPRESSXZ=(xz -c -z -)
COMPRESSLRZ=(lrzip -q)
COMPRESSLZO=(lzop -q)
COMPRESSZ=(compress -c -f)
# EXTENSION DEFAULTS
# WARNING: Do NOT modify these variables unless you know what you are
# doing.
PKGEXT='.pkg.tar.xz'
SRCEXT='.src.tar.gz'
# vim: set ft=sh ts=2 sw=2 et:
Here is line 89, which is the one that yaourt flags:
- Options to be used when stripping binaries. See `man strip' for
It's almost as if it is treating "for" as a command. This is very strange.
Also, I do have the architecture specified in the makepkg. It doesn't matter which package I try to install: it does the same thing.
Does anyone have any ideas? I'd really appreciate your help.
Thank you.
Sincerely,
Corey Goettsch

Karol,
Thank you for the suggestion. Here are the code outputs
[nicholas@nicholas ~]$ yaourt -S markoftheninja-hib
/etc/makepkg.conf: line 89: for: command not found
==> Downloading markoftheninja-hib PKGBUILD from AUR...
x markoftheninja-hib.desktop
x PKGBUILD
markoftheninja-hib 1.38+h20131002-1 (Wed Sep 11 20:25:29 EDT 2013)
( Unsupported package: Potentially dangerous ! )
==> Edit PKGBUILD ? [Y/n] ("A" to abort)
==> ------------------------------------
==> n
/etc/makepkg.conf: line 89: for: command not found
==> WARNING: Running makepkg as an unprivileged user will result in non-root
ownership of the packaged files. Try using the fakeroot environment by
placing 'fakeroot' in the BUILDENV array in /etc/makepkg.conf.
==> markoftheninja-hib dependencies:
- sdl (already installed)
- libgl (already installed)
- gcc-libs (already installed)
- xdg-utils (already installed)
==> Continue building markoftheninja-hib ? [Y/n]
==> --------------------------------------------
==>
==> Building and installing package
/etc/makepkg.conf: line 89: for: command not found
==> WARNING: Running makepkg as an unprivileged user will result in non-root
ownership of the packaged files. Try using the fakeroot environment by
placing 'fakeroot' in the BUILDENV array in /etc/makepkg.conf.
==> ERROR: markoftheninja-hib is not available for the '' architecture.
Note that many packages may need a line added to their PKGBUILD
such as arch=('').
==> ERROR: Makepkg was unable to build markoftheninja-hib.
==> Restart building markoftheninja-hib ? [y/N]
==> -------------------------------------------
==>
[nicholas@nicholas ~]$ sudo gedit /etc/makepkg.conf
[sudo] password for nicholas:
(gedit:2211): Gtk-WARNING **: Theme parsing error: notebook.css:6:13: Theming engine 'unico' not found
(gedit:2211): Gtk-WARNING **: Theme parsing error: nemo.css:90:13: Theming engine 'unico' not found
And this is my makepkg.conf:
# /etc/makepkg.conf
# SOURCE ACQUISITION
#-- The download utilities that makepkg should use to acquire sources
# Format: 'protocol::agent'
DLAGENTS=('ftp::/usr/bin/curl -fC - --ftp-pasv --retry 3 --retry-delay 3 -o %o %u'
'http::/usr/bin/curl -fLC - --retry 3 --retry-delay 3 -o %o %u'
'https::/usr/bin/curl -fLC - --retry 3 --retry-delay 3 -o %o %u'
'rsync::/usr/bin/rsync --no-motd -z %u %o'
'scp::/usr/bin/scp -C %u %o'
'hib::/usr/bin/find /home/nicholas/Downloads -name $(echo %u | cut -c 7-) -exec ln -s \{\} %o \; -quit')'
# Other common tools:
# /usr/bin/snarf
# /usr/bin/lftpget -c
# /usr/bin/wget
# ARCHITECTURE, COMPILE FLAGS
CARCH="x86_64"
CHOST="x86_64-unknown-linux-gnu"
#-- Compiler and Linker Flags
# -march (or -mcpu) builds exclusively for an architecture
# -mtune optimizes for an architecture, but builds for whole processor family
CPPFLAGS="-D_FORTIFY_SOURCE=2"
CFLAGS="-march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4"
CXXFLAGS="-march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4"
LDFLAGS="-Wl,-O1,--sort-common,--as-needed,-z,relro"
#-- Make Flags: change this for DistCC/SMP systems
#MAKEFLAGS="-j2"
#-- Debugging flags
DEBUG_CFLAGS="-g -fvar-tracking-assignments"
DEBUG_CXXFLAGS="-g -fvar-tracking-assignments"
# BUILD ENVIRONMENT
# Defaults: BUILDENV=(fakeroot !distcc color !ccache check !sign)
# A negated environment option will do the opposite of the comments below.
#-- fakeroot: Allow building packages as a non-root user
#-- distcc: Use the Distributed C/C++/ObjC compiler
#-- color: Colorize output messages
#-- ccache: Use ccache to cache compilation
#-- check: Run the check() function if present in the PKGBUILD
#-- sign: Generate PGP signature file
BUILDENV=(fakeroot !distcc color !ccache check !sign)
#-- If using DistCC, your MAKEFLAGS will also need modification. In addition,
#-- specify a space-delimited list of hosts running in the DistCC cluster.
#DISTCC_HOSTS=""
#-- Specify a directory for package building.
#BUILDDIR=/tmp/makepkg
# GLOBAL PACKAGE OPTIONS
# These are default values for the options=() settings
# Default: OPTIONS=(strip docs !libtool !staticlibs emptydirs zipman purge !upx !debug)
# A negated option will do the opposite of the comments below.
#-- strip: Strip symbols from binaries/libraries
#-- docs: Save doc directories specified by DOC_DIRS
#-- libtool: Leave libtool (.la) files in packages
#-- staticlibs: Leave static library (.a) files in packages
#-- emptydirs: Leave empty directories in packages
#-- zipman: Compress manual (man and info) pages in MAN_DIRS with gzip
#-- purge: Remove files specified by PURGE_TARGETS
#-- upx: Compress binary executable files using UPX
#-- debug: Add debugging flags as specified in DEBUG_* variables
OPTIONS=(strip docs !libtool !staticlibs emptydirs zipman purge !upx !debug)
#-- File integrity checks to use. Valid: md5, sha1, sha256, sha384, sha512
INTEGRITY_CHECK=(md5)
#-- Options to be used when stripping binaries. See `man strip' for details.
STRIP_BINARIES="--strip-all"
#-- Options to be used when stripping shared libraries. See `man strip' for details.
STRIP_SHARED="--strip-unneeded"
#-- Options to be used when stripping static libraries. See `man strip' for details.
STRIP_STATIC="--strip-debug"
#-- Manual (man and info) directories to compress (if zipman is specified)
MAN_DIRS=({usr{,/local}{,/share},opt/*}/{man,info})
#-- Doc directories to remove (if !docs is specified)
DOC_DIRS=(usr/{,local/}{,share/}{doc,gtk-doc} opt/*/{doc,gtk-doc})
#-- Files to be removed from all packages (if purge is specified)
PURGE_TARGETS=(usr/{,share}/info/dir .packlist *.pod)
# PACKAGE OUTPUT
# Default: put built package and cached source in build directory
#-- Destination: specify a fixed directory where all packages will be placed
#PKGDEST=/home/packages
#-- Source cache: specify a fixed directory where source files will be cached
#SRCDEST=/home/sources
#-- Source packages: specify a fixed directory where all src packages will be placed
#SRCPKGDEST=/home/srcpackages
#-- Log files: specify a fixed directory where all log files will be placed
#LOGDEST=/home/makepkglogs
#-- Packager: name/email of the person or organization building packages
#PACKAGER="John Doe <[email protected]>"
#-- Specify a key to use for package signing
#GPGKEY=""
# COMPRESSION DEFAULTS
COMPRESSGZ=(gzip -c -f -n)
COMPRESSBZ2=(bzip2 -c -f)
COMPRESSXZ=(xz -c -z -)
COMPRESSLRZ=(lrzip -q)
COMPRESSLZO=(lzop -q)
COMPRESSZ=(compress -c -f)
# EXTENSION DEFAULTS
# WARNING: Do NOT modify these variables unless you know what you are
# doing.
PKGEXT='.pkg.tar.xz'
SRCEXT='.src.tar.gz'
# vim: set ft=sh ts=2 sw=2 et:
And, last, here is the output from line 89:
#-- Options to be used when stripping binaries. See `man strip' for details.
So, the problem is that "for" in line 89 is being treated like a command. Which is very strange. Also, I already have fakeroot set up in makepkg.conf. And, last, I also have the architecture specified in the PKGBUILD. So, I'm a bit at a loss here. I would really appreciate any help.

Enabling -fstack-protector-strong in makepkg.conf?

A little more than a year ago Google submitted a patch which added a -fstack-protector-strong option which was intended to strike a balance between -fstack-protector (used in Arch) and -fstack-protector-all which was considered too computationally expensive for google's chromiumos. All of these options introduce measures to protect compiled programs against stack overflow attacks to varying degrees of security and performance.
This google doc sums up what the new flag introduces: https://docs.google.com/document/d/1xXB … t?hl=en_US
My recently installed default /etc/makepkg.conf shows -fstack-protector (not -strong) in CFLAGS. Is there a specific reason that it has not yet been implemented in Arch, or has it simply just "not happened" yet?
Fedora 20 is now using -fstack-protector-strong. After some searching I couldn't find anything here or on the arch bugtracker which discusses the new option. I should add that I am by no means well-versed in security and this is something I would like to know more about.
Last edited by oboenerd (2013-12-08 03:13:19)

This is something that should be brought up in the bug tracker I think. Though, interestingly this is not documented in the gcc man page nor the gcc info page.
Edit: I didn't follow your links, but I do remember reading about this. It would seem that this functionality has not been merged, as trying to use -fstack-protector-strong fails with:
gcc: error: unrecognized command line option '-fstack-protector-strong'
Last edited by WonderWoofy (2013-12-08 03:54:56)

BUILDENV in new makepkg.conf is lowercase!

I just discovered after upgrading to the new pacman that in the new makepkg.conf, BUILDENV=(foo) is actually buildenv=(foo).
I kept getting these warnings about having fakeroot in the BUILDENV list. After being really confused I realized why it wasn't working, I vimdiffed my old one to see what the problem was.
Just a heads up for anyone else that has this problem.

I don't know why your BUILDENV was lowercase, but I doubt it was via pacman.. I don't see that typo in any of the revisions, nor in the pacnew files on my 2 Arch systems.
i686 makepkg.conf revs
x86_64 makepkg.conf revs

I'm missing makepkg.conf

Well, I accidentally deleted /etc/makepkg.conf, and I don't find a sample anywhere. How do I generate a new one?

You can also grab https://projects.archlinux.org/svntogit … ges/pacman but I think you have to edit
CARCH="@CARCH@"
CHOST="@CHOST@"
etc. to e.g.
CARCH="i686"
CHOST="i686-pc-linux-gnu"
by hand.

NEEDED? makepkg.conf.pacnew and/or yaourt-git: WARNING: Unable to copy

Hi....
ISSUE: when I try to install CERTAIN things via yaourt on my up to date system.
At the end of the yaourt process I will sometimes get the:
==> WARNING: Unable to copy WHATEVER PACKAGE to /tmp/ directory
I'm pretty sure I deleted makepkg.conf.pacnew.
I am certain to have gone through the big 3.2 pacman upgrade a while back.
I assumed the pacnew was a pacsave ...I guess.... can't assume of course.
The only post I could find was this one...
http://bbs.archlinux.org/viewtopic.php?id=53040
As I very likely threw out the makepkg.conf.pacnew
and missed the merge thing.... could someone post it... or tell me the fix....
OTHER FIX/ISSUE I READ ABOUT:
yaourt-git needed instead of the release version ????
I'm not at all sure if I need yaourt-git and the doing of the recommended MERGE with the makepkg.conf.pacnew and the old one.
After this gets resolved I will hopefully add t omy knowledge of AUR usage... and add the other install techniques!! great!
thanks!!!!!!!!
Last edited by yvonney (2009-01-24 08:50:36)

anonymous_user wrote:Pacman is 4.1 is not released yet. The wiki is just telling you about the new feature in the next pacman.
I see, but I do not understand why I already encounter PKGBUILDs written with the aforementioned "style".
For instance, giving a look to pacman-git, I find:
source=(git://projects.archlinux.org/pacman.git)
sha1sums=('SKIP')
pkgver() {
cd pacman
git describe | sed 's/^v//;s/-/./g'
build() {
cd "pacman"
./autogen.sh
./configure \
--prefix=/usr \
--sysconfdir=/etc \
--localstatedir=/var \
--enable-doc \
--enable-git-version \
--enable-debug \
--with-scriptlet-shell=/usr/bin/bash \
--with-ldconfig=/usr/bin/ldconfig
make
make -C contrib
As I said, my makepkg cannot handle that source and there is not an official way to fix it, apparently.

Makepkg.conf the same as make.conf

Simple question really, is makepkg the same as make? If I add in CFLAGS will they be used when compiling packages from source or does makepkg just work when using makepkg.

makepkg is for compiling from source but the settings from makepkg.conf won't be used if you run
./configure && make && make install
by hand (and it doesn't create an Arch package), they are used when you run 'makepkg'.
'less /usr/bin/makepkg' will show you what 'makepkg' is.
From the wiki: https://wiki.archlinux.org/index.php/Makepkg
makepkg is a script that automates the building of packages; it can download and validate source files, check dependencies, configure build-time settings, compile the sources, install into a temporary root, make customizations, generate meta-info, and package everything together.
Last edited by karol (2011-07-04 20:21:27)

Makepkg.conf and active ftp

I'm trying to build some arch-packages but having problems with makepkg while downloading the tarballs. I think it has something to do with the use of active ftp, but passive doesn't work in the network I use.
My makepkg.conf:
DLAGENTS=('ftp::/usr/bin/wget -c --no-passive-ftp -t 3 --waitretry=3 -O %o %u'
'http::/usr/bin/wget -c -t 3 --waitretry=3 -O %o %u'
'https::/usr/bin/wget -c -t 3 --waitretry=3 --no-check-certificate -O %o %u'
'rsync::/usr/bin/rsync -z %u %o'
'scp::/usr/bin/scp -C %u %o')
CARCH="i686"
CHOST="i686-pc-linux-gnu"
CFLAGS="-march=i686 -mtune=generic -O2 -pipe"
CXXFLAGS="-march=i686 -mtune=generic -O2 -pipe"
BUILDENV=(fakeroot !distcc color !ccache !xdelta)
OPTIONS=(strip docs libtool emptydirs zipman)
INTEGRITY_CHECK=(md5)
DOC_DIRS=(usr/{,share/}{info,doc,gtk-doc} opt/*/{info,doc,gtk-doc})
STRIP_DIRS=(bin lib sbin usr/{bin,lib,sbin,local/{bin,lib,sbin}} opt/*/{bin,lib,sbin})
BUILDSCRIPT='PKGBUILD'
PKGEXT='.pkg.tar.gz'
SRCEXT='.src.tar.gz'
DB_COMPRESSION='gz'
DB_CHECKSUMS=(md5)
with makepkg I get the following output:
--2008-10-07 23:05:26-- ftp://...
(try: 3) => 'package'
Connecting to ftp.... connected.
Logging in as anonymous ... Logged in!
==> SYST ... done. ==> PWD ... done.
==> TYPE I ... done. ==> CWD /packagedir ... done.
==> SIZE package ... size
==> PORT ... done. ==> RETR package ...
Error in server response, closing control connection.
can someone help me?

It's the only one package. And it fails to build every time on different files with the same error. And if I just enter ./src/arora-build and run qmake && make it does compile ok.
The error example:
.obj/moc_settings.o: file not recognized: File truncated
collect2: ld returned 1 exit status
P.S. PKGBUILD is community/arora-git
Last edited by vit (2009-05-06 18:02:36)

Makepkg.conf: Stripping /usr/local Docs Out Of Builds?

Trying to strip out '/usr/local/gtk-doc/html' out of builds without resorting to 'without-html-dir'. Tried the following individually within makepkg.conf with no effect:
OPTIONS=(!docs)
DOC_DIRS=({usr{,/local}{,/share},opt/*}/{doc,gtk-doc}
DOC_DIRS=({usr{,/local}{,/share},opt/*}/{doc,gtk-doc{,/html}}
DOC_DIRS=(usr/{,local/}{,share/}{doc,gtk-doc} opt/*/{doc,gtk-doc})
DOC_DIRS=(usr/{,local/}{,share/}{doc,gtk-doc{,/html}} opt/*/{doc,gtk-doc{,/html}})
All fo the above appear to echo properly. No options=() within any PKGBUILD files I am testing. How to strip '/usr/local/gtk-doc/html' out of builds using makepkg.conf (would rather not add an 'rm' statement to each and every PKGBUILD)?
Last edited by adamlau (2009-03-29 21:43:48)

Correct. This is my /etc/makepkg-git.conf (makepkg.conf backed up and removed from /etc):
DLAGENTS=('ftp::/usr/bin/wget -c --passive-ftp -t 3 --waitretry=3 -O %o %u'
'http::/usr/bin/wget -c -t 3 --waitretry=3 -O %o %u'
'https::/usr/bin/wget -c -t 3 --waitretry=3 --no-check-certificate -O %o %u'
'rsync::/usr/bin/rsync -z %u %o'
'scp::/usr/bin/scp -C %u %o')
CARCH="i686"
CHOST="i686-pc-linux-gnu"
CFLAGS="-march=native -O2 -pipe -fomit-frame-pointer"
CXXFLAGS="-march=native -O2 -pipe -fomit-frame-pointer"
LDFLAGS="-Wl,-O1,--as-needed,--hash-style=gnu"
#MAKEFLAGS="-j2"
BUILDENV=(fakeroot !distcc color !ccache !xdelta)
OPTIONS=(strip !docs !libtool !emptydirs zipman purge)
INTEGRITY_CHECK=(md5)
MAN_DIRS=({usr{,/local}{,/share},opt/*}/{man,info})
DOC_DIRS=(usr/{,local/}{,share/}{doc,gtk-doc} opt/*/{doc,gtk-doc})
STRIP_DIRS=(bin lib sbin usr/{bin,lib,sbin,local/{bin,lib,sbin}} opt/*/{bin,lib,sbin})
PURGE_TARGETS=(usr/{,share}/info/dir .packlist *.pod)
PKGEXT='.pkg.tar.gz'
SRCEXT='.src.tar.gz'

[solved] Editing makepkg.conf (x86_64)

Similar Messages

Maybe you are looking for