[SOLVED]fluxbox,dual monitor apps without DISPLAY command
Hello, i use a dual monitor system with nvidia videocard, i don't use xinerama and twinview i use they as 2 different displays.
Recently i updated my arch system and now i can't start applications on the second screen just selecting and clicking on menu, but i have to use the command DISPLAY=:0.1 before the app name.
Before the system update i was able to run applications just selectin it from menu and they started in the monitor where the menu was called!!!
FYI i use fluxbox git, i just update it.
Any ideas?
Thanks in advice!
Last edited by Xeo84 (2010-12-18 18:36:39)
As reporteed here:
http://www.gossamer-threads.com/lists/g … ser/222370
is a bug of libX11, i downgraded to 1.3.5 and it's solved
Similar Messages
-
[Solved]Openbox dual monitor crashing
I have been working this out for days to no avail. I have an ATI video card not using the catalyst drivers. Dual monitors worked fine in KDE without any additional setup, and no xorg.conf. In openbox i have tried with arandr, and manual. but when i enable the second monitor its seems that openbox crashes, because whatever is on the screen at the time of enabling the monitor turns to static. I think its openbox because i still have a functional mouse cursor and has proper fucntions accross both monitors in any configuration that i try. when it crashes i have to hard reboot. when i reboot with the monitor still plugged in, both lvds and vga will display a cloned image at the same resolution which is the wrong resolution for both lvds and vga.
I have googled till there is no link unclicked, and wiki give me nothing. i dont believe that i need to set up an xorg.conf as the external is detected fine. its almost like when x applies the settings it corrupts openbox.
anyone have any ideas?
Last edited by zero_one (2010-09-18 18:26:28)zero_one wrote:you mean add the monitors to a xx-monitor.conf? i can give that a try but it doesnt seem that would provide the flexibility that im looking for as sometimes i use the external monitor disabiling lvds, sometimes right of, and sometimes i use hdmi to my tv set right of, to watch movies.
I mean add the monitors to xorg.conf. Here is the xorg.conf I use with openbox (separate X display for the TV), just to give you an idea - yours will differ with ATI:
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen[0]"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "ServerLayout"
Identifier "tv"
Screen 0 "Screen[1]" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Module"
Load "glx"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
Option "AutoRepeat" "210 50" #added, did no good, use ~/.xinitrc xset
Option "XkbOptions" "terminate:ctrl_alt_bksp"
EndSection
Section "Monitor"
Identifier "Monitor[0]"
HorizSync 31.0 - 83.0
VertRefresh 55.0 - 76.0
Option "DPMS"
EndSection
Section "Monitor"
Identifier "Monitor[1]"
HorizSync 15.0 - 620.0
VertRefresh 15.0 - 600.0
EndSection
Section "Device"
Identifier "Device[0]"
Driver "nvidia"
BoardName "GeForce 8500 GT"
BusID "PCI:1:0:0"
EndSection
Section "Device"
Identifier "Device[1]"
Driver "nvidia"
BoardName "GeForce 8500 GT"
#adjust using 'lspci' or cat /proc/pci
BusID "PCI:1:0:0"
Option "ConnectedMonitor" "TV"
EndSection
Section "Screen"
#nvidia
Identifier "Screen[0]"
Device "Device[0]"
Monitor "Monitor[0]"
DefaultDepth 24
Option "TwinView" "0"
# Option "metamodes" "DFP: nvidia-auto-select +0+0"
Option "NoLogo" "True"
Option "RenderAccel" "True"
Option "AddARGBGLXVisuals" "True"
SubSection "Display"
Depth 24
Modes "nvidia-auto-select"
EndSubSection
EndSection
Section "Screen"
#nvidia
Identifier "Screen[1]"
Device "Device[1]"
Monitor "Monitor[1]"
DefaultDepth 24
Option "TwinView" "0"
Option "UseEDID" "FALSE"
Option "ConnectedMonitor" "TV"
Option "TvOutFormat" "Component"
Option "metamodes" "CRT: 1920x1080 +0+0"
Option "TVStandard" "HD1080i"
Option "RenderAccel" "True"
Option "AddARGBGLXVisuals" "True"
SubSection "Display"
Depth 24
Modes "nvidia-auto-select"
EndSubSection
EndSection
Then I start the second X display on the TV with this in openbox's autostart.sh:
(sleep 5 && xinit /usr/bin/openbox -- /usr/bin/X :1 -layout tv -nolisten tcp) &
Thus there are two instances of openbox running.
It may not give you the flexibility, but for testing it may help you narrow down what is causing the problem and find remedies.
Also, the monitor turning to static sounds more like a driver or X issue than something with openbox.
Last edited by IgnorantGuru (2010-09-18 17:46:12) -
Dual Monitor Issue: 2nd Display too large...can't adjust...web pages provide no scroll bars
I have two (2) HP S2031 LCD flat screen monitors. They functioned perfectly with my old 32-bit machine (now gone). I have just purchased a new 64-bit Windows 7 machine. There are no error messages, but if I open a web page on the right (2nd) monitor, it does not display correctly. It's as if it is a little too large. I've tried adjusting the image using the Nividia software and using the monitor adjustments without improvement. It is difficult getting out of that window because no scroll bars (vertical or horizontal) present themselves. I am connecting through an iogear MiniView KVM switch to DVi-D sockets (with the four pins).
Is it a 64-bit driver issue? I think not, because display #1 looks fine. Could it be an iogear KVM firmware issue?
I dug out the HP driver disks that came with my monitors and installed them. After I did that, I realized these were a 32-bit installation. Now the monitor resolution won't go back to the higher, recommended level. I don't see the software installation on the "add/remove programs" listing. I'd like to change that.
BUT THE REAL ISSUE is that I need BOTH monitors to be able to display proper aspect independently. Remember, I've been through both the Nividia adjustments menu and the built-in monitor adjustments menu and found nothing that worked so far.
Please help if you can. This is for my trading business and I need it desperately.When requesting assistance, please provide the brand and model name and/or product number of the computer in question. Without this information, it may be difficult or impossible to resolve your issue.
Have you swapped the two monitors to see if the problem follows the monitor or remains at the same location??? Try that first... if the problem follows the monitor, perform a hard reset by unpluging the monitor from power then holding the power button for 30 seconds. If the problem stays in the same location, you know both monitors are good and I would suspect the KVM isn't passing the "EDID" data to the computer. Removing the KVM should will tell you if this is the case.
Please post back with your troubleshooting results.
Please send KUDOs
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240 -
Dual monitor setup without using the ADC?
Would it be possible to run a dual monitor setup using a DVI splitter cable from my (2009)Mac Pro?
I've seen some old forums referring to the 2006 models saying that this wouldn't work and instead you'd get the same image on both screens but the newer Mac Pros state they have "Dual-Link DVI ports".
Just wondering whether this means what I think it means and you can connect two monitors via a dual link cable and get essentially, two monitors running independently as opposed to the same thing on both??
Hope it's staightforward and me just being slow.The GT120 features one Dual Link DVI-I port and one Mini DisplayPort .
The DVI-I is Dual Link capable, and also can be directly adapted to VGA.
Single-Link DVI is a serial interface that carries three data bits in each signaling interval, as well as control signals. In general, Single-Link supports displays up to 1920 wide. Dual Link DVI is the same except that it carries six data bits in each signaling interval, supporting displays over 1920 wide.
DVI screen drawing is very similar to VGA screen drawing, and the data sent are digital "scan lines" left-to-right row data, top-to-bottom with entire screen data sent about every 60 Hertz. Analog VGA signals are sent at the same time on a separate set of pins.
DisplayPort and its Mini variant are inherently a packet interface, but can be coerced to produce a "Dual Mode" signal that approximates Single-Link DVI. Getting Dual-Link DVI or VGA from DisplayPort interface requires a non-trivial converter than contains chips and requires power.
Executive Summary:
If you have one display that is wider than 1920 or VGA, attach to the DVI-I connector with an appropriate cable.
Running a Mini DisplayPort display from the Mini DisplayPort requires only a cable.
Single-Link DVI can be had from the Mini DisplayPort with a cheap adapter.
Dual-Link DVI or VGA requires an expensive Active Powered converter which can cost US$100. -
Ipad monitoring app without jail break
i am in need of a monitoring app for my children's ipads and do not want to jailbreak them. i there are several apps that appear perfect for my needs, ie peektab, but they all require jail breaking. i've searched the app store and elsewhere online with no results. can anyone offer any advice or recommendations for such an app? thanks!
I don't know of anything like that but you can set up Restrictions to prevent them from changing settings or purchasing things without consent.
-
Dual monitor setup without Xinerama or TwinView
I've searched the forum looking for anyone who is using a dual display setup without using Xinerama or TwinView. There are plenty of discussions to the contrary, but I running one window manager (DWM) on my primary monitor and anything else on the secondary monitor. I don't care about dragging between displays or any of the other features of Xinerama and TwinView offer, but my current implementation is rather crude.
So, I'm looking for a discussion on the this topic.
Current setup:
* Thinkpad T61 with NVIDIA M140 graphics
* Samsung 24" external monitor (245bw)Procyon wrote:
Vintendo wrote:I would like two instances of dwm, one for each screen.
Default dual head does this. So no twinview or xinerama.
Edit: and you run it with
DISPLAY=:0.0 setsid dwm &
DISPLAY=:0.1 setsid dwm &
You can even use two different executables built from different config.h. It's fun to experiment with.
and you setup the resolutions via xorg.conf "screen" section right? -
[solved] XFCE Dual monitor causes theme & icon, xconf issues
Hey all,
Here is the issue:
I have sony svz13114gxx laptop with xfce4 DE, i just tried to hook up external vga monitor to laptop and everything configures right (no mirroring) with this run in normal session:
xrandr --output eDP1 --mode 1920x1080
xrandr --newmode "1920x1200_60.00" 193.25 1920 2056 2256 2592 1200 1203 1209 1245 -hsync +vsync
xrandr --addmode VGA1 1920x1200_60.00
xrandr --output VGA1 --mode 1920x1200_60.00
xrandr --output VGA1 --left-of eDP1
Obviously when i reboot this is not persistent, so then i put this stuff in my /etc/X11/xorg.conf.d/20-intel.conf:
Section "Device"
Identifier "Intel Graphics"
Driver "intel"
Option "AccelMethod" "sna"
Option "monitor-eDP1" "eDP1"
Option "monitor-VGA1" "VGA1"
EndSection
Section "Monitor"
Identifier "VGA1"
Modeline "1920x1200_60.00" 193.25 1920 2056 2256 2592 1200 1203 1209 1245 -HSync +VSync
Option "PreferredMode" "1920x1200_60.00"
EndSection
Section "Monitor"
Identifier "eDP1"
Option "PreferredMode" "1920x1080"
Option "Primary" "true"
Option "Position" "1920 0"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Intel Graphics"
Monitor "eDP1"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1920x1080"
EndSubSection
EndSection
This is where the problems start. On reboot Slim desktop manager seems to be stretched properly across the two monitors, but the I login and the display switches back to being mirrored, my xfce gtk2 theme is disabled in favor of somee default looking one, my icons are back to default, and none of my custom keyboard shorcuts work.
I can then use xrandr to get the displays in extended mode again, but the themes and icons etc do not revert. And on reboot, i have the same issue.
I have tried the sourcing ~/.xprofile, ~/.xinitrc, and ~/.config.xfce4/xinitrc routes, putting the xrandr cammands above the exec lines and that doesn't even enable VGA1.
I have been to all these places
https://wiki.ubuntu.com/X/Config/Resolution#Xrandr_Graphical_Front_End_GUI
http://ilkinbalkanay.blogspot.com/2008/01/extended-desktop-configuration-with.html
https://bbs.archlinux.org/viewtopic.php?id=98747
https://www.google.com/search?q=arch%20xrandr&ie=utf-8&oe=utf-8&aq=t&rls=org.mozilla:en-US:official&client=firefox-a&source=hp&channel=np
https://wiki.archlinux.org/index.php/Execute_commands_after_X_start
http://intellinuxgraphics.org/dualhead.html
http://mac.linux.be/content/setting-xorgconf-manually-xrandr#3
https://www.google.com/search?q=arch%20dual%20monitors%20The%20last%20active%20output%20must%20not%20be%20disabled%2C%20the%20system%20would%20be%20unusable.&ie=utf-8&oe=utf-8&aq=t&rls=org.mozilla:en-US:official&client=firefox-a&source=hp&channel=np#hl=en&safe=off&client=firefox-a&tbo=d&rls=org.mozilla:en-US%3Aofficial&channel=np&sclient=psy-ab&q=xfce+%22Selected+output+not+disabled%22&oq=xfce+%22Selected+output+not+disabled%22&gs_l=serp.3...1694.1694.3.2205.1.1.0.0.0.0.97.97.1.1.0.les%3Bcrnk_timediscounta..0.0...1c.1.O4EDj7DaWlA&pbx=1&fp=1&bpcl=39468505&biw=984&bih=936&cad=b&sei=aKC_UIKvJ6GA0AGTg4HwBg&sei=FKS_UMuwJdPU0gHorICQBA&bav=on.2,or.r_gc.r_pw.r_qf.&sei=2MK_UOaAJ5Ph0wGbsoHICg
https://wiki.archlinux.org/index.php/Xfce#Customizing_Startup_Applications
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/x-config.html
https://wiki.archlinux.org/index.php/Xorg#Monitor_settings
Even after much research, still no luck.
this might be useful:
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=631225
Anyone have any ideas?
here is my Xorg0.log
[ 3.490]
X.Org X Server 1.13.0
Release Date: 2012-09-05
[ 3.490] X Protocol Version 11, Revision 0
[ 3.490] Build Operating System: Linux 3.6.3-1-ARCH x86_64
[ 3.490] Current Operating System: Linux tcz 3.6.8-1-ARCH #1 SMP PREEMPT Mon Nov 26 22:10:40 CET 2012 x86_64
[ 3.490] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=d23251af-35fa-426b-a7d5-5aa2f0a5b87d ro quiet pcie_aspm=force i915.i915_enable_rc6=1
[ 3.490] Build Date: 08 November 2012 07:09:29PM
[ 3.490]
[ 3.490] Current version of pixman: 0.28.0
[ 3.490] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 3.490] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 3.490] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Dec 5 16:25:21 2012
[ 3.492] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 3.494] (==) No Layout section. Using the first Screen section.
[ 3.494] (**) |-->Screen "Default Screen" (0)
[ 3.494] (**) | |-->Monitor "eDP1"
[ 3.494] (**) | |-->Device "Intel Graphics"
[ 3.494] (==) Automatically adding devices
[ 3.494] (==) Automatically enabling devices
[ 3.494] (==) Automatically adding GPU devices
[ 3.504] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 3.504] Entry deleted from font path.
[ 3.504] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 3.504] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 3.504] Entry deleted from font path.
[ 3.504] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 3.504] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/
[ 3.504] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 3.504] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 3.504] (II) Loader magic: 0x7fcc40
[ 3.504] (II) Module ABI versions:
[ 3.504] X.Org ANSI C Emulation: 0.4
[ 3.504] X.Org Video Driver: 13.1
[ 3.504] X.Org XInput driver : 18.0
[ 3.504] X.Org Server Extension : 7.0
[ 3.505] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 6.276] (--) PCI:*(0:0:2:0) 8086:0166:104d:90a5 rev 9, Mem @ 0xd7000000/4194304, 0xc0000000/268435456, I/O @ 0x00009000/64
[ 6.276] (II) Open ACPI successful (/var/run/acpid.socket)
[ 6.276] Initializing built-in extension Generic Event Extension
[ 6.276] Initializing built-in extension SHAPE
[ 6.276] Initializing built-in extension MIT-SHM
[ 6.276] Initializing built-in extension XInputExtension
[ 6.276] Initializing built-in extension XTEST
[ 6.276] Initializing built-in extension BIG-REQUESTS
[ 6.276] Initializing built-in extension SYNC
[ 6.276] Initializing built-in extension XKEYBOARD
[ 6.276] Initializing built-in extension XC-MISC
[ 6.276] Initializing built-in extension SECURITY
[ 6.276] Initializing built-in extension XINERAMA
[ 6.276] Initializing built-in extension XFIXES
[ 6.276] Initializing built-in extension RENDER
[ 6.276] Initializing built-in extension RANDR
[ 6.276] Initializing built-in extension COMPOSITE
[ 6.276] Initializing built-in extension DAMAGE
[ 6.276] Initializing built-in extension MIT-SCREEN-SAVER
[ 6.276] Initializing built-in extension DOUBLE-BUFFER
[ 6.276] Initializing built-in extension RECORD
[ 6.276] Initializing built-in extension DPMS
[ 6.276] Initializing built-in extension X-Resource
[ 6.276] Initializing built-in extension XVideo
[ 6.276] Initializing built-in extension XVideo-MotionCompensation
[ 6.276] Initializing built-in extension XFree86-VidModeExtension
[ 6.276] Initializing built-in extension XFree86-DGA
[ 6.276] Initializing built-in extension XFree86-DRI
[ 6.276] Initializing built-in extension DRI2
[ 6.276] (II) LoadModule: "glx"
[ 6.278] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 6.281] (II) Module glx: vendor="X.Org Foundation"
[ 6.281] compiled for 1.13.0, module version = 1.0.0
[ 6.281] ABI class: X.Org Server Extension, version 7.0
[ 6.281] (==) AIGLX enabled
[ 6.281] Loading extension GLX
[ 6.281] (II) LoadModule: "intel"
[ 6.281] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 6.285] (II) Module intel: vendor="X.Org Foundation"
[ 6.285] compiled for 1.13.0.901, module version = 2.20.14
[ 6.285] Module class: X.Org Video Driver
[ 6.285] ABI class: X.Org Video Driver, version 13.1
[ 6.285] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
Haswell Server (GT2+), Haswell SDV Desktop (GT1),
Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
Haswell ULT Server (GT1), Haswell ULT Server (GT2),
Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
ValleyView PO board
[ 6.286] (++) using VT number 7
[ 6.288] (II) intel(0): using device path '/dev/dri/card0'
[ 6.288] (**) intel(0): Depth 24, (--) framebuffer bpp 32
[ 6.288] (==) intel(0): RGB weight 888
[ 6.288] (==) intel(0): Default visual is TrueColor
[ 6.288] (**) intel(0): Option "AccelMethod" "sna"
[ 6.288] (--) intel(0): Integrated Graphics Chipset: Intel(R) Ivybridge Mobile (GT2)
[ 6.289] (**) intel(0): Framebuffer tiled
[ 6.289] (**) intel(0): Pixmaps tiled
[ 6.289] (**) intel(0): 3D buffers tiled
[ 6.289] (**) intel(0): Throttling enabled
[ 6.289] (**) intel(0): Delayed flush enabled
[ 6.289] (**) intel(0): "Tear free" disabled
[ 6.289] (**) intel(0): Forcing per-crtc-pixmaps? no
[ 6.289] (II) intel(0): Output eDP1 using monitor section eDP1
[ 6.289] (**) intel(0): Option "PreferredMode" "1920x1080"
[ 6.289] (**) intel(0): Option "Position" "1920 0"
[ 6.289] (**) intel(0): Option "Primary" "true"
[ 6.289] (--) intel(0): found backlight control interface acpi_video0 (type 'firmware')
[ 6.293] (II) intel(0): Output VGA1 using monitor section VGA1
[ 6.293] (**) intel(0): Option "PreferredMode" "1920x1200_60.00"
[ 6.294] (II) intel(0): Output HDMI1 has no monitor section
[ 6.336] (II) intel(0): Output DP1 has no monitor section
[ 6.337] (II) intel(0): EDID for output eDP1
[ 6.337] (II) intel(0): Manufacturer: MS_ Model: 25 Serial#: 16843009
[ 6.337] (II) intel(0): Year: 2012 Week: 24
[ 6.337] (II) intel(0): EDID Version: 1.4
[ 6.337] (II) intel(0): Digital Display Input
[ 6.337] (II) intel(0): 8 bits per channel
[ 6.337] (II) intel(0): Digital interface is DisplayPort
[ 6.337] (II) intel(0): Max Image Size [cm]: horiz.: 29 vert.: 16
[ 6.337] (II) intel(0): Gamma: 2.20
[ 6.337] (II) intel(0): No DPMS capabilities specified
[ 6.337] (II) intel(0): Supported color encodings: RGB 4:4:4
[ 6.337] (II) intel(0): First detailed timing is preferred mode
[ 6.337] (II) intel(0): Preferred mode is native pixel format and refresh rate
[ 6.337] (II) intel(0): redX: 0.602 redY: 0.336 greenX: 0.296 greenY: 0.546
[ 6.337] (II) intel(0): blueX: 0.148 blueY: 0.126 whiteX: 0.313 whiteY: 0.329
[ 6.337] (II) intel(0): Manufacturer's mask: 0
[ 6.337] (II) intel(0): Supported standard timings:
[ 6.337] (II) intel(0): #0: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
[ 6.337] (II) intel(0): Supported detailed timing:
[ 6.337] (II) intel(0): clock: 162.8 MHz Image Size: 291 x 164 mm
[ 6.337] (II) intel(0): h_active: 1920 h_sync: 1952 h_sync_end 1984 h_blank_end 2481 h_border: 0
[ 6.337] (II) intel(0): v_active: 1080 v_sync: 1083 v_sync_end 1086 v_blanking: 1095 v_border: 0
[ 6.337] (II) intel(0): Supported detailed timing:
[ 6.337] (II) intel(0): clock: 99.9 MHz Image Size: 291 x 164 mm
[ 6.337] (II) intel(0): h_active: 1920 h_sync: 1952 h_sync_end 1984 h_blank_end 2281 h_border: 0
[ 6.337] (II) intel(0): v_active: 1080 v_sync: 1083 v_sync_end 1086 v_blanking: 1095 v_border: 0
[ 6.337] (II) intel(0): Monitor name: Sony LCD
[ 6.337] (II) intel(0): Ranges: V min: 39 V max: 61 Hz, H min: 43 H max: 66 kHz, PixClock max 175 MHz
[ 6.337] (II) intel(0): EDID (in hex):
[ 6.337] (II) intel(0): 00ffffffffffff00367f250001010101
[ 6.337] (II) intel(0): 18160104a51d1078020f159a564b8b26
[ 6.337] (II) intel(0): 205054000000d1c00101010101010101
[ 6.337] (II) intel(0): 0101010101019c3f803172380f402020
[ 6.337] (II) intel(0): 330023a4100000180727806971380f40
[ 6.337] (II) intel(0): 2020330023a410000018000000fc0053
[ 6.337] (II) intel(0): 6f6e79204c43440a20202020000000fd
[ 6.337] (II) intel(0): 00273d2b4211000a2020202020200013
[ 6.337] (II) intel(0): EDID vendor "MS_", prod id 37
[ 6.337] (II) intel(0): Using EDID range info for horizontal sync
[ 6.337] (II) intel(0): Using EDID range info for vertical refresh
[ 6.337] (II) intel(0): Printing DDC gathered Modelines:
[ 6.337] (II) intel(0): Modeline "1920x1080"x0.0 162.84 1920 1952 1984 2481 1080 1083 1086 1095 -hsync -vsync (65.6 kHz eP)
[ 6.337] (II) intel(0): Modeline "1920x1080"x0.0 99.91 1920 1952 1984 2281 1080 1083 1086 1095 -hsync -vsync (43.8 kHz e)
[ 6.337] (II) intel(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[ 6.337] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 6.337] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 6.337] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 6.337] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 6.337] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 6.337] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 6.337] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 6.337] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 6.337] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 6.337] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 6.337] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 6.337] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 6.337] (II) intel(0): Printing probed modes for output eDP1
[ 6.337] (II) intel(0): Modeline "1920x1080"x59.9 162.84 1920 1952 1984 2481 1080 1083 1086 1095 -hsync -vsync (65.6 kHz UeP)
[ 6.337] (II) intel(0): Modeline "1920x1080"x40.0 99.91 1920 1952 1984 2281 1080 1083 1086 1095 -hsync -vsync (43.8 kHz e)
[ 6.338] (II) intel(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 6.338] (II) intel(0): Modeline "1680x945"x60.0 131.48 1680 1784 1960 2240 945 946 949 978 -hsync +vsync (58.7 kHz)
[ 6.338] (II) intel(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[ 6.338] (II) intel(0): Modeline "1400x1050"x60.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
[ 6.338] (II) intel(0): Modeline "1600x900"x60.0 118.96 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz)
[ 6.338] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 6.338] (II) intel(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 6.338] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 6.338] (II) intel(0): Modeline "1366x768"x60.0 85.89 1366 1439 1583 1800 768 769 772 795 -hsync +vsync (47.7 kHz)
[ 6.338] (II) intel(0): Modeline "1360x768"x60.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e)
[ 6.338] (II) intel(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 +hsync -vsync (49.7 kHz e)
[ 6.338] (II) intel(0): Modeline "1280x768"x59.9 79.50 1280 1344 1472 1664 768 771 778 798 -hsync +vsync (47.8 kHz e)
[ 6.338] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 6.338] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 6.338] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 6.338] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 6.343] (II) intel(0): EDID for output VGA1
[ 6.343] (II) intel(0): Printing probed modes for output VGA1
[ 6.343] (II) intel(0): Modeline "1920x1200_60.00"x59.9 193.25 1920 2056 2256 2592 1200 1203 1209 1245 -hsync +vsync (74.6 kHz UP)
[ 6.343] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 6.344] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 6.344] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 6.344] (II) intel(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
[ 6.344] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 489 492 525 -hsync -vsync (31.5 kHz e)
[ 6.344] (II) intel(0): EDID for output HDMI1
[ 6.386] (II) intel(0): EDID for output DP1
[ 6.386] (II) intel(0): Output eDP1 connected
[ 6.386] (II) intel(0): Output VGA1 connected
[ 6.386] (II) intel(0): Output HDMI1 disconnected
[ 6.386] (II) intel(0): Output DP1 disconnected
[ 6.386] (II) intel(0): Using user preference for initial modes
[ 6.386] (II) intel(0): Output eDP1 using initial mode 1920x1080
[ 6.386] (II) intel(0): Output VGA1 using initial mode 1920x1200_60.00
[ 6.386] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 6.386] (**) intel(0): Display dimensions: (290, 160) mm
[ 6.386] (**) intel(0): DPI set to (336, 190)
[ 6.386] (II) Loading sub module "dri2"
[ 6.386] (II) LoadModule: "dri2"
[ 6.387] (II) Module "dri2" already built-in
[ 6.387] (==) Depth 24 pixmap format is 32 bpp
[ 6.387] (II) intel(0): SNA initialized with IvyBridge backend
[ 6.387] (==) intel(0): Backing store disabled
[ 6.387] (==) intel(0): Silken mouse enabled
[ 6.387] (II) intel(0): HW Cursor enabled
[ 6.387] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 6.388] (==) intel(0): DPMS enabled
[ 6.388] (II) intel(0): [DRI2] Setup complete
[ 6.388] (II) intel(0): [DRI2] DRI driver: i965
[ 6.388] (II) intel(0): direct rendering: DRI2 Enabled
[ 6.388] (WW) intel(0): Option "PreferredMode" is not used
[ 6.388] (WW) intel(0): Option "Primary" is not used
[ 6.388] (WW) intel(0): Option "Position" is not used
[ 6.388] (==) intel(0): hotplug detection: "enabled"
[ 6.388] (--) RandR disabled
[ 6.410] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 6.410] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 6.410] (II) AIGLX: enabled GLX_ARB_create_context
[ 6.410] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 6.410] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 6.410] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 6.410] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 6.410] (II) AIGLX: Loaded and initialized i965
[ 6.410] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 6.411] (II) intel(0): switch to mode 1920x1080 on crtc 3 (pipe 0)
[ 6.500] (II) intel(0): switch to mode 1920x1200 on crtc 5 (pipe 1)
[ 6.663] (II) intel(0): Setting screen physical size to 1016 x 317
[ 6.703] (II) config/udev: Adding input device Video Bus (/dev/input/event10)
[ 6.703] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 6.703] (II) LoadModule: "evdev"
[ 6.704] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 6.706] (II) Module evdev: vendor="X.Org Foundation"
[ 6.706] compiled for 1.13.0, module version = 2.7.3
[ 6.706] Module class: X.Org XInput Driver
[ 6.706] ABI class: X.Org XInput driver, version 18.0
[ 6.706] (II) Using input driver 'evdev' for 'Video Bus'
[ 6.706] (**) Video Bus: always reports core events
[ 6.706] (**) evdev: Video Bus: Device: "/dev/input/event10"
[ 6.706] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 6.706] (--) evdev: Video Bus: Found keys
[ 6.706] (II) evdev: Video Bus: Configuring as keyboard
[ 6.706] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:09/input/input10/event10"
[ 6.706] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 6)
[ 6.706] (**) Option "xkb_rules" "evdev"
[ 6.706] (**) Option "xkb_model" "evdev"
[ 6.706] (**) Option "xkb_layout" "us"
[ 6.732] (II) config/udev: Adding input device Sony Vaio Keys (/dev/input/event3)
[ 6.732] (**) Sony Vaio Keys: Applying InputClass "evdev keyboard catchall"
[ 6.732] (II) Using input driver 'evdev' for 'Sony Vaio Keys'
[ 6.732] (**) Sony Vaio Keys: always reports core events
[ 6.732] (**) evdev: Sony Vaio Keys: Device: "/dev/input/event3"
[ 6.732] (--) evdev: Sony Vaio Keys: Vendor 0x104d Product 0
[ 6.732] (--) evdev: Sony Vaio Keys: Found keys
[ 6.732] (II) evdev: Sony Vaio Keys: Configuring as keyboard
[ 6.732] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/SNY5001:00/input/input3/event3"
[ 6.732] (II) XINPUT: Adding extended input device "Sony Vaio Keys" (type: KEYBOARD, id 7)
[ 6.732] (**) Option "xkb_rules" "evdev"
[ 6.732] (**) Option "xkb_model" "evdev"
[ 6.732] (**) Option "xkb_layout" "us"
[ 6.732] (II) config/udev: Adding input device Sony Vaio Jogdial (/dev/input/event4)
[ 6.732] (II) No input driver specified, ignoring this device.
[ 6.732] (II) This device may have been added with another device file.
[ 6.733] (II) config/udev: Adding input device Sony Vaio Jogdial (/dev/input/mouse0)
[ 6.733] (II) No input driver specified, ignoring this device.
[ 6.733] (II) This device may have been added with another device file.
[ 6.733] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 6.733] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 6.733] (II) Using input driver 'evdev' for 'Power Button'
[ 6.733] (**) Power Button: always reports core events
[ 6.733] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 6.733] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 6.733] (--) evdev: Power Button: Found keys
[ 6.733] (II) evdev: Power Button: Configuring as keyboard
[ 6.733] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[ 6.733] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 6.733] (**) Option "xkb_rules" "evdev"
[ 6.733] (**) Option "xkb_model" "evdev"
[ 6.733] (**) Option "xkb_layout" "us"
[ 6.733] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 6.733] (II) No input driver specified, ignoring this device.
[ 6.733] (II) This device may have been added with another device file.
[ 6.733] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 6.734] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event6)
[ 6.734] (II) No input driver specified, ignoring this device.
[ 6.734] (II) This device may have been added with another device file.
[ 6.734] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event7)
[ 6.734] (II) No input driver specified, ignoring this device.
[ 6.734] (II) This device may have been added with another device file.
[ 6.735] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event8)
[ 6.735] (II) No input driver specified, ignoring this device.
[ 6.735] (II) This device may have been added with another device file.
[ 6.735] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 6.735] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 6.735] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 6.735] (**) AT Translated Set 2 keyboard: always reports core events
[ 6.735] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 6.735] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 6.735] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 6.735] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 6.735] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 6.735] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[ 6.735] (**) Option "xkb_rules" "evdev"
[ 6.735] (**) Option "xkb_model" "evdev"
[ 6.735] (**) Option "xkb_layout" "us"
[ 6.736] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event9)
[ 6.736] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 6.736] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 6.736] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 6.736] (II) LoadModule: "synaptics"
[ 6.737] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 6.738] (II) Module synaptics: vendor="X.Org Foundation"
[ 6.738] compiled for 1.13.0, module version = 1.6.2
[ 6.738] Module class: X.Org XInput Driver
[ 6.738] ABI class: X.Org XInput driver, version 18.0
[ 6.738] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 6.738] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 6.738] (**) Option "Device" "/dev/input/event9"
[ 6.740] (II) synaptics: SynPS/2 Synaptics TouchPad: found clickpad property
[ 6.740] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5768
[ 6.740] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4758
[ 6.740] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 6.740] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 6.740] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left double triple
[ 6.740] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 6.740] (**) Option "FingerLow" "35"
[ 6.740] (**) Option "FingerHigh" "45"
[ 6.740] (**) Option "ClickPad" "true"
[ 6.740] (**) Option "EmulateMidButtonTime" "0"
[ 6.740] (**) Option "HorizTwoFingerScroll" "on"
[ 6.740] (**) Option "TapButton1" "1"
[ 6.740] (**) Option "TapButton2" "2"
[ 6.740] (**) Option "TapButton3" "3"
[ 6.740] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[ 6.740] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 6.740] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 6.740] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input9/event9"
[ 6.740] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 10)
[ 6.741] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 6.741] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 6.741] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.037
[ 6.741] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 6.741] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 6.741] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 6.741] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 6.741] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 6.742] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[ 6.742] (II) No input driver specified, ignoring this device.
[ 6.742] (II) This device may have been added with another device file.
[ 6.742] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 6.742] (II) No input driver specified, ignoring this device.
[ 6.742] (II) This device may have been added with another device file.
[ 6.747] removing GPU device /sys/devices/pci0000:00/0000:00:02.0/drm/card0 21764432
[ 6.747] xf86: remove device 0 /sys/devices/pci0000:00/0000:00:02.0/drm/card0
[ 6.747] failed to find screen to remove
[ 6.747] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 6.747] removing GPU device /sys/devices/pci0000:00/0000:00:02.0/drm/card0/card0-eDP-1 0
[ 6.747] removing GPU device /sys/devices/pci0000:00/0000:00:02.0/drm/card0/card0-VGA-1 0
[ 6.747] (II) config/udev: removing device Video Bus
[ 6.773] (II) evdev: Video Bus: Close
[ 6.773] (II) UnloadModule: "evdev"
[ 6.773] (II) config/udev: Adding input device Video Bus (/dev/input/event10)
[ 6.773] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 6.773] (II) Using input driver 'evdev' for 'Video Bus'
[ 6.773] (**) Video Bus: always reports core events
[ 6.773] (**) evdev: Video Bus: Device: "/dev/input/event10"
[ 6.773] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 6.773] (--) evdev: Video Bus: Found keys
[ 6.773] (II) evdev: Video Bus: Configuring as keyboard
[ 6.773] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:09/input/input10/event10"
[ 6.773] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 6)
[ 6.773] (**) Option "xkb_rules" "evdev"
[ 6.773] (**) Option "xkb_model" "evdev"
[ 6.773] (**) Option "xkb_layout" "us"
[ 6.774] removing GPU device /sys/devices/pci0000:00/0000:00:02.0/drm/card0/card0-HDMI-A-1 0
[ 6.774] removing GPU device /sys/devices/pci0000:00/0000:00:02.0/drm/card0/card0-DP-1 0
[ 7.569] (II) config/udev: Adding input device USB2.0 Camera (/dev/input/event11)
[ 7.569] (**) USB2.0 Camera: Applying InputClass "evdev keyboard catchall"
[ 7.569] (II) Using input driver 'evdev' for 'USB2.0 Camera'
[ 7.569] (**) USB2.0 Camera: always reports core events
[ 7.569] (**) evdev: USB2.0 Camera: Device: "/dev/input/event11"
[ 7.569] (--) evdev: USB2.0 Camera: Vendor 0x5ca Product 0x18c6
[ 7.569] (--) evdev: USB2.0 Camera: Found keys
[ 7.569] (II) evdev: USB2.0 Camera: Configuring as keyboard
[ 7.569] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input11/event11"
[ 7.569] (II) XINPUT: Adding extended input device "USB2.0 Camera" (type: KEYBOARD, id 11)
[ 7.569] (**) Option "xkb_rules" "evdev"
[ 7.569] (**) Option "xkb_model" "evdev"
[ 7.569] (**) Option "xkb_layout" "us"
[ 24.939] (II) intel(0): EDID vendor "MS_", prod id 37
[ 24.939] (II) intel(0): Using hsync ranges from config file
[ 24.939] (II) intel(0): Using vrefresh ranges from config file
[ 24.939] (II) intel(0): Printing DDC gathered Modelines:
[ 24.939] (II) intel(0): Modeline "1920x1080"x0.0 162.84 1920 1952 1984 2481 1080 1083 1086 1095 -hsync -vsync (65.6 kHz eP)
[ 24.939] (II) intel(0): Modeline "1920x1080"x0.0 99.91 1920 1952 1984 2281 1080 1083 1086 1095 -hsync -vsync (43.8 kHz e)
[ 24.939] (II) intel(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[ 24.989] (II) intel(0): switch to mode 1920x1080 on crtc 3 (pipe 0)
[ 25.055] (II) intel(0): EDID vendor "MS_", prod id 37
[ 25.055] (II) intel(0): Using hsync ranges from config file
[ 25.055] (II) intel(0): Using vrefresh ranges from config file
[ 25.055] (II) intel(0): Printing DDC gathered Modelines:
[ 25.055] (II) intel(0): Modeline "1920x1080"x0.0 162.84 1920 1952 1984 2481 1080 1083 1086 1095 -hsync -vsync (65.6 kHz eP)
[ 25.055] (II) intel(0): Modeline "1920x1080"x0.0 99.91 1920 1952 1984 2281 1080 1083 1086 1095 -hsync -vsync (43.8 kHz e)
[ 25.055] (II) intel(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[ 25.150] (II) intel(0): EDID vendor "MS_", prod id 37
[ 25.150] (II) intel(0): Using hsync ranges from config file
[ 25.150] (II) intel(0): Using vrefresh ranges from config file
[ 25.150] (II) intel(0): Printing DDC gathered Modelines:
[ 25.150] (II) intel(0): Modeline "1920x1080"x0.0 162.84 1920 1952 1984 2481 1080 1083 1086 1095 -hsync -vsync (65.6 kHz eP)
[ 25.150] (II) intel(0): Modeline "1920x1080"x0.0 99.91 1920 1952 1984 2281 1080 1083 1086 1095 -hsync -vsync (43.8 kHz e)
[ 25.150] (II) intel(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[ 25.274] (II) intel(0): EDID vendor "MS_", prod id 37
[ 25.274] (II) intel(0): Using hsync ranges from config file
[ 25.274] (II) intel(0): Using vrefresh ranges from config file
[ 25.274] (II) intel(0): Printing DDC gathered Modelines:
[ 25.274] (II) intel(0): Modeline "1920x1080"x0.0 162.84 1920 1952 1984 2481 1080 1083 1086 1095 -hsync -vsync (65.6 kHz eP)
[ 25.274] (II) intel(0): Modeline "1920x1080"x0.0 99.91 1920 1952 1984 2281 1080 1083 1086 1095 -hsync -vsync (43.8 kHz e)
[ 25.274] (II) intel(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[ 25.387] (II) intel(0): EDID vendor "MS_", prod id 37
[ 25.387] (II) intel(0): Using hsync ranges from config file
[ 25.387] (II) intel(0): Using vrefresh ranges from config file
[ 25.387] (II) intel(0): Printing DDC gathered Modelines:
[ 25.387] (II) intel(0): Modeline "1920x1080"x0.0 162.84 1920 1952 1984 2481 1080 1083 1086 1095 -hsync -vsync (65.6 kHz eP)
[ 25.387] (II) intel(0): Modeline "1920x1080"x0.0 99.91 1920 1952 1984 2281 1080 1083 1086 1095 -hsync -vsync (43.8 kHz e)
[ 25.387] (II) intel(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[ 25.518] (II) intel(0): EDID vendor "MS_", prod id 37
[ 25.518] (II) intel(0): Using hsync ranges from config file
[ 25.518] (II) intel(0): Using vrefresh ranges from config file
[ 25.518] (II) intel(0): Printing DDC gathered Modelines:
[ 25.518] (II) intel(0): Modeline "1920x1080"x0.0 162.84 1920 1952 1984 2481 1080 1083 1086 1095 -hsync -vsync (65.6 kHz eP)
[ 25.518] (II) intel(0): Modeline "1920x1080"x0.0 99.91 1920 1952 1984 2281 1080 1083 1086 1095 -hsync -vsync (43.8 kHz e)
[ 25.518] (II) intel(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[ 25.676] (II) intel(0): EDID vendor "MS_", prod id 37
[ 25.676] (II) intel(0): Using hsync ranges from config file
[ 25.676] (II) intel(0): Using vrefresh ranges from config file
[ 25.676] (II) intel(0): Printing DDC gathered Modelines:
[ 25.676] (II) intel(0): Modeline "1920x1080"x0.0 162.84 1920 1952 1984 2481 1080 1083 1086 1095 -hsync -vsync (65.6 kHz eP)
[ 25.676] (II) intel(0): Modeline "1920x1080"x0.0 99.91 1920 1952 1984 2281 1080 1083 1086 1095 -hsync -vsync (43.8 kHz e)
[ 25.676] (II) intel(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[ 29.373] (II) config/udev: Adding input device Bluetooth Laser Travel Mouse (/dev/input/mouse2)
[ 29.373] (II) No input driver specified, ignoring this device.
[ 29.373] (II) This device may have been added with another device file.
[ 29.373] (II) config/udev: Adding input device Bluetooth Laser Travel Mouse (/dev/input/event12)
[ 29.373] (**) Bluetooth Laser Travel Mouse: Applying InputClass "evdev pointer catchall"
[ 29.373] (II) Using input driver 'evdev' for 'Bluetooth Laser Travel Mouse'
[ 29.373] (**) Bluetooth Laser Travel Mouse: always reports core events
[ 29.373] (**) evdev: Bluetooth Laser Travel Mouse: Device: "/dev/input/event12"
[ 29.373] (--) evdev: Bluetooth Laser Travel Mouse: Vendor 0x46d Product 0xb008
[ 29.373] (--) evdev: Bluetooth Laser Travel Mouse: Found 12 mouse buttons
[ 29.373] (--) evdev: Bluetooth Laser Travel Mouse: Found scroll wheel(s)
[ 29.373] (--) evdev: Bluetooth Laser Travel Mouse: Found relative axes
[ 29.373] (--) evdev: Bluetooth Laser Travel Mouse: Found x and y relative axes
[ 29.374] (II) evdev: Bluetooth Laser Travel Mouse: Configuring as mouse
[ 29.374] (II) evdev: Bluetooth Laser Travel Mouse: Adding scrollwheel support
[ 29.374] (**) evdev: Bluetooth Laser Travel Mouse: YAxisMapping: buttons 4 and 5
[ 29.374] (**) evdev: Bluetooth Laser Travel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 29.374] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/bluetooth/hci0/hci0:33/input12/event12"
[ 29.374] (II) XINPUT: Adding extended input device "Bluetooth Laser Travel Mouse" (type: MOUSE, id 12)
[ 29.374] (II) evdev: Bluetooth Laser Travel Mouse: initialized for relative axes.
[ 29.374] (**) Bluetooth Laser Travel Mouse: (accel) keeping acceleration scheme 1
[ 29.374] (**) Bluetooth Laser Travel Mouse: (accel) acceleration profile 0
[ 29.374] (**) Bluetooth Laser Travel Mouse: (accel) acceleration factor: 2.000
[ 29.374] (**) Bluetooth Laser Travel Mouse: (accel) acceleration threshold: 4
[ 589.381] (II) intel(0): EDID vendor "MS_", prod id 37
[ 589.381] (II) intel(0): Using hsync ranges from config file
[ 589.381] (II) intel(0): Using vrefresh ranges from config file
[ 589.381] (II) intel(0): Printing DDC gathered Modelines:
[ 589.381] (II) intel(0): Modeline "1920x1080"x0.0 162.84 1920 1952 1984 2481 1080 1083 1086 1095 -hsync -vsync (65.6 kHz eP)
[ 589.381] (II) intel(0): Modeline "1920x1080"x0.0 99.91 1920 1952 1984 2281 1080 1083 1086 1095 -hsync -vsync (43.8 kHz e)
[ 589.381] (II) intel(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[ 589.433] (II) intel(0): switch to mode 1920x1080 on crtc 3 (pipe 0)
[ 1442.644] (II) intel(0): EDID vendor "MS_", prod id 37
[ 1442.644] (II) intel(0): Using hsync ranges from config file
[ 1442.644] (II) intel(0): Using vrefresh ranges from config file
[ 1442.644] (II) intel(0): Printing DDC gathered Modelines:
[ 1442.644]Hey all,
Here is the issue:
I have sony svz13114gxx laptop with xfce4 DE, i just tried to hook up external vga monitor to laptop and everything configures right with this run in normal session:
[code]
xrandr --output eDP1 --mode 1920x1080
xrandr --newmode "1920x1200_60.00" 193.25 1920 2056 2256 2592 1200 1203 1209 1245 -hsync +vsync
xrandr --addmode VGA1 1920x1200_60.00
xrandr --output VGA1 --mode 1920x1200_60.00
xrandr --output VGA1 --left-of eDP1
[/code]
Obviously when i reboot this is not persistent, so then i put this stuff in my /etc/X11/xorg.conf.d/20-intel.conf:
[code]
Section "Device"
Identifier "Intel Graphics"
Driver "intel"
Option "AccelMethod" "sna"
Option "monitor-eDP1" "eDP1"
Option "monitor-VGA1" "VGA1"
EndSection
Section "Monitor"
Identifier "VGA1"
Modeline "1920x1200_60.00" 193.25 1920 2056 2256 2592 1200 1203 1209 1245 -HSync +VSync
Option "PreferredMode" "1920x1200_60.00"
EndSection
Section "Monitor"
Identifier "eDP1"
Option "PreferredMode" "1920x1080"
Option "Primary" "true"
Option "Position" "1920 0"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Intel Graphics"
Monitor "eDP1"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1920x1080"
EndSubSection
EndSection[/code]
This is where the problems start. On reboot Slim desktop manager seems to be stretched properly across the two monitors, but the I login and the display switches back to being mirrored, my xfce gtk2 theme is disabled in favor of somee default looking one, my icons are back to default, and none of my custom keyboard shorcuts work.
I can then use xrandr to get the displays in extended mode again, but the themes and icons etc do not revert. And on reboot, i have the same issue.
I have tried the sourcing ~/.xprofile, ~/.xinitrc, and ~/.config.xfce4/xinitrc routes, putting the xrandr cammands above the exec lines and that doesn't even enable VGA1.
I have been to all these places
[code]
https://wiki.ubuntu.com/X/Config/Resolution#Xrandr_Graphical_Front_End_GUI
http://ilkinbalkanay.blogspot.com/2008/01/extended-desktop-configuration-with.html
https://bbs.archlinux.org/viewtopic.php?id=98747
https://www.google.com/search?q=arch%20xrandr&ie=utf-8&oe=utf-8&aq=t&rls=org.mozilla:en-US:official&client=firefox-a&source=hp&channel=np
https://wiki.archlinux.org/index.php/Execute_commands_after_X_start
http://intellinuxgraphics.org/dualhead.html
http://mac.linux.be/content/setting-xorgconf-manually-xrandr#3
https://www.google.com/search?q=arch%20dual%20monitors%20The%20last%20active%20output%20must%20not%20be%20disabled%2C%20the%20system%20would%20be%20unusable.&ie=utf-8&oe=utf-8&aq=t&rls=org.mozilla:en-US:official&client=firefox-a&source=hp&channel=np#hl=en&safe=off&client=firefox-a&tbo=d&rls=org.mozilla:en-US%3Aofficial&channel=np&sclient=psy-ab&q=xfce+%22Selected+output+not+disabled%22&oq=xfce+%22Selected+output+not+disabled%22&gs_l=serp.3...1694.1694.3.2205.1.1.0.0.0.0.97.97.1.1.0.les%3Bcrnk_timediscounta..0.0...1c.1.O4EDj7DaWlA&pbx=1&fp=1&bpcl=39468505&biw=984&bih=936&cad=b&sei=aKC_UIKvJ6GA0AGTg4HwBg&sei=FKS_UMuwJdPU0gHorICQBA&bav=on.2,or.r_gc.r_pw.r_qf.&sei=2MK_UOaAJ5Ph0wGbsoHICg
https://wiki.archlinux.org/index.php/Xfce#Customizing_Startup_Applications
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/x-config.html
https://wiki.archlinux.org/index.php/Xorg#Monitor_settings
[/code]
Even after much research, still no luck.
this might be useful:
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=631225
Anyone have any ideas?
here is my Xorg0.log
[code]
[ 3.490]
X.Org X Server 1.13.0
Release Date: 2012-09-05
[ 3.490] X Protocol Version 11, Revision 0
[ 3.490] Build Operating System: Linux 3.6.3-1-ARCH x86_64
[ 3.490] Current Operating System: Linux tcz 3.6.8-1-ARCH #1 SMP PREEMPT Mon Nov 26 22:10:40 CET 2012 x86_64
[ 3.490] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=d23251af-35fa-426b-a7d5-5aa2f0a5b87d ro quiet pcie_aspm=force i915.i915_enable_rc6=1
[ 3.490] Build Date: 08 November 2012 07:09:29PM
[ 3.490]
[ 3.490] Current version of pixman: 0.28.0
[ 3.490] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 3.490] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 3.490] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Dec 5 16:25:21 2012
[ 3.492] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 3.494] (==) No Layout section. Using the first Screen section.
[ 3.494] (**) |-->Screen "Default Screen" (0)
[ 3.494] (**) | |-->Monitor "eDP1"
[ 3.494] (**) | |-->Device "Intel Graphics"
[ 3.494] (==) Automatically adding devices
[ 3.494] (==) Automatically enabling devices
[ 3.494] (==) Automatically adding GPU devices
[ 3.504] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 3.504] Entry deleted from font path.
[ 3.504] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 3.504] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 3.504] Entry deleted from font path.
[ 3.504] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 3.504] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/
[ 3.504] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 3.504] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 3.504] (II) Loader magic: 0x7fcc40
[ 3.504] (II) Module ABI versions:
[ 3.504] X.Org ANSI C Emulation: 0.4
[ 3.504] X.Org Video Driver: 13.1
[ 3.504] X.Org XInput driver : 18.0
[ 3.504] X.Org Server Extension : 7.0
[ 3.505] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 6.276] (--) PCI:*(0:0:2:0) 8086:0166:104d:90a5 rev 9, Mem @ 0xd7000000/4194304, 0xc0000000/268435456, I/O @ 0x00009000/64
[ 6.276] (II) Open ACPI successful (/var/run/acpid.socket)
[ 6.276] Initializing built-in extension Generic Event Extension
[ 6.276] Initializing built-in extension SHAPE
[ 6.276] Initializing built-in extension MIT-SHM
[ 6.276] Initializing built-in extension XInputExtension
[ 6.276] Initializing built-in extension XTEST
[ 6.276] Initializing built-in extension BIG-REQUESTS
[ 6.276] Initializing built-in extension SYNC
[ 6.276] Initializing built-in extension XKEYBOARD
[ 6.276] Initializing built-in extension XC-MISC
[ 6.276] Initializing built-in extension SECURITY
[ 6.276] Initializing built-in extension XINERAMA
[ 6.276] Initializing built-in extension XFIXES
[ 6.276] Initializing built-in extension RENDER
[ 6.276] Initializing built-in extension RANDR
[ 6.276] Initializing built-in extension COMPOSITE
[ 6.276] Initializing built-in extension DAMAGE
[ 6.276] Initializing built-in extension MIT-SCREEN-SAVER
[ 6.276] Initializing built-in extension DOUBLE-BUFFER
[ 6.276] Initializing built-in extension RECORD
[ 6.276] Initializing built-in extension DPMS
[ 6.276] Initializing built-in extension X-Resource
[ 6.276] Initializing built-in extension XVideo
[ 6.276] Initializing built-in extension XVideo-MotionCompensation
[ 6.276] Initializing built-in extension XFree86-VidModeExtension
[ 6.276] Initializing built-in extension XFree86-DGA
[ 6.276] Initializing built-in extension XFree86-DRI
[ 6.276] Initializing built-in extension DRI2
[ 6.276] (II) LoadModule: "glx"
[ 6.278] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 6.281] (II) Module glx: vendor="X.Org Foundation"
[ 6.281] compiled for 1.13.0, module version = 1.0.0
[ 6.281] ABI class: X.Org Server Extension, version 7.0
[ 6.281] (==) AIGLX enabled
[ 6.281] Loading extension GLX
[ 6.281] (II) LoadModule: "intel"
[ 6.281] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 6.285] (II) Module intel: vendor="X.Org Foundation"
[ 6.285] compiled for 1.13.0.901, module version = 2.20.14
[ 6.285] Module class: X.Org Video Driver
[ 6.285] ABI class: X.Org Video Driver, version 13.1
[ 6.285] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
Haswell Server (GT2+), Haswell SDV Desktop (GT1),
Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
Haswell ULT Server (GT1), Haswell ULT Server (GT2),
Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
ValleyView PO board
[ 6.286] (++) using VT number 7
[ 6.288] (II) intel(0): using device path '/dev/dri/card0'
[ 6.288] (**) intel(0): Depth 24, (--) framebuffer bpp 32
[ 6.288] (==) intel(0): RGB weight 888
[ 6.288] (==) intel(0): Default visual is TrueColor
[ 6.288] (**) intel(0): Option "AccelMethod" "sna"
[ 6.288] (--) intel(0): Integrated Graphics Chipset: Intel(R) Ivybridge Mobile (GT2)
[ 6.289] (**) intel(0): Framebuffer tiled
[ 6.289] (**) intel(0): Pixmaps tiled
[ 6.289] (**) intel(0): 3D buffers tiled
[ 6.289] (**) intel(0): Throttling enabled
[ 6.289] (**) intel(0): Delayed flush enabled
[ 6.289] (**) intel(0): "Tear free" disabled
[ 6.289] (**) intel(0): Forcing per-crtc-pixmaps? no
[ 6.289] (II) intel(0): Output eDP1 using monitor section eDP1
[ 6.289] (**) intel(0): Option "PreferredMode" "1920x1080"
[ 6.289] (**) intel(0): Option "Position" "1920 0"
[ 6.289] (**) intel(0): Option "Primary" "true"
[ 6.289] (--) intel(0): found backlight control interface acpi_video0 (type 'firmware')
[ 6.293] (II) intel(0): Output VGA1 using monitor section VGA1
[ 6.293] (**) intel(0): Option "PreferredMode" "1920x1200_60.00"
[ 6.294] (II) intel(0): Output HDMI1 has no monitor section
[ 6.336] (II) intel(0): Output DP1 has no monitor section
[ 6.337] (II) intel(0): EDID for output eDP1
[ 6.337] (II) intel(0): Manufacturer: MS_ Model: 25 Serial#: 16843009
[ 6.337] (II) intel(0): Year: 2012 Week: 24
[ 6.337] (II) intel(0): EDID Version: 1.4
[ 6.337] (II) intel(0): Digital Display Input
[ 6.337] (II) intel(0): 8 bits per channel
[ 6.337] (II) intel(0): Digital interface is DisplayPort
[ 6.337] (II) intel(0): Max Image Size [cm]: horiz.: 29 vert.: 16
[ 6.337] (II) intel(0): Gamma: 2.20
[ 6.337] (II) intel(0): No DPMS capabilities specified
[ 6.337] (II) intel(0): Supported color encodings: RGB 4:4:4
[ 6.337] (II) intel(0): First detailed timing is preferred mode
[ 6.337] (II) intel(0): Preferred mode is native pixel format and refresh rate
[ 6.337] (II) intel(0): redX: 0.602 redY: 0.336 greenX: 0.296 greenY: 0.546
[ 6.337] (II) intel(0): blueX: 0.148 blueY: 0.126 whiteX: 0.313 whiteY: 0.329
[ 6.337] (II) intel(0): Manufacturer's mask: 0
[ 6.337] (II) intel(0): Supported standard timings:
[ 6.337] (II) intel(0): #0: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
[ 6.337] (II) intel(0): Supported detailed timing:
[ 6.337] (II) intel(0): clock: 162.8 MHz Image Size: 291 x 164 mm
[ 6.337] (II) intel(0): h_active: 1920 h_sync: 1952 h_sync_end 1984 h_blank_end 2481 h_border: 0
[ 6.337] (II) intel(0): v_active: 1080 v_sync: 1083 v_sync_end 1086 v_blanking: 1095 v_border: 0
[ 6.337] (II) intel(0): Supported detailed timing:
[ 6.337] (II) intel(0): clock: 99.9 MHz Image Size: 291 x 164 mm
[ 6.337] (II) intel(0): h_active: 1920 h_sync: 1952 h_sync_end 1984 h_blank_end 2281 h_border: 0
[ 6.337] (II) intel(0): v_active: 1080 v_sync: 1083 v_sync_end 1086 v_blanking: 1095 v_border: 0
[ 6.337] (II) intel(0): Monitor name: Sony LCD
[ 6.337] (II) intel(0): Ranges: V min: 39 V max: 61 Hz, H min: 43 H max: 66 kHz, PixClock max 175 MHz
[ 6.337] (II) intel(0): EDID (in hex):
[ 6.337] (II) intel(0): 00ffffffffffff00367f250001010101
[ 6.337] (II) intel(0): 18160104a51d1078020f159a564b8b26
[ 6.337] (II) intel(0): 205054000000d1c00101010101010101
[ 6.337] (II) intel(0): 0101010101019c3f803172380f402020
[ 6.337] (II) intel(0): 330023a4100000180727806971380f40
[ 6.337] (II) intel(0): 2020330023a410000018000000fc0053
[ 6.337] (II) intel(0): 6f6e79204c43440a20202020000000fd
[ 6.337] (II) intel(0): 00273d2b4211000a2020202020200013
[ 6.337] (II) intel(0): EDID vendor "MS_", prod id 37
[ 6.337] (II) intel(0): Using EDID range info for horizontal sync
[ 6.337] (II) intel(0): Using EDID range info for vertical refresh
[ 6.337] (II) intel(0): Printing DDC gathered Modelines:
[ 6.337] (II) intel(0): Modeline "1920x1080"x0.0 162.84 1920 1952 1984 2481 1080 1083 1086 1095 -hsync -vsync (65.6 kHz eP)
[ 6.337] (II) intel(0): Modeline "1920x1080"x0.0 99.91 1920 1952 1984 2281 1080 1083 1086 1095 -hsync -vsync (43.8 kHz e)
[ 6.337] (II) intel(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[ 6.337] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 6.337] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 6.337] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 6.337] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 6.337] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 6.337] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 6.337] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 6.337] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 6.337] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 6.337] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 6.337] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 6.337] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 6.337] (II) intel(0): Printing probed modes for output eDP1
[ 6.337] (II) intel(0): Modeline "1920x1080"x59.9 162.84 1920 1952 1984 2481 1080 1083 1086 1095 -hsync -vsync (65.6 kHz UeP)
[ 6.337] (II) intel(0): Modeline "1920x1080"x40.0 99.91 1920 1952 1984 2281 1080 1083 1086 1095 -hsync -vsync (43.8 kHz e)
[ 6.338] (II) intel(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 6.338] (II) intel(0): Modeline "1680x945"x60.0 131.48 1680 1784 1960 2240 945 946 949 978 -hsync +vsync (58.7 kHz)
[ 6.338] (II) intel(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[ 6.338] (II) intel(0): Modeline "1400x1050"x60.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
[ 6.338] (II) intel(0): Modeline "1600x900"x60.0 118.96 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz)
[ 6.338] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 6.338] (II) intel(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 6.338] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 6.338] (II) intel(0): Modeline "1366x768"x60.0 85.89 1366 1439 1583 1800 768 769 772 795 -hsync +vsync (47.7 kHz)
[ 6.338] (II) intel(0): Modeline "1360x768"x60.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e)
[ 6.338] (II) intel(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 +hsync -vsync (49.7 kHz e)
[ 6.338] (II) intel(0): Modeline "1280x768"x59.9 79.50 1280 1344 1472 1664 768 771 778 798 -hsync +vsync (47.8 kHz e)
[ 6.338] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 6.338] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 6.338] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 6.338] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 6.343] (II) intel(0): EDID for output VGA1
[ 6.343] (II) intel(0): Printing probed modes for output VGA1
[ 6.343] (II) intel(0): Modeline "1920x1200_60.00"x59.9 193.25 1920 2056 2256 2592 1200 1203 1209 1245 -hsync +vsync (74.6 kHz UP)
[ 6.343] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 6.344] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 6.344] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 6.344] (II) intel(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
[ 6.344] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 489 492 525 -hsync -vsync (31.5 kHz e)
[ 6.344] (II) intel(0): EDID for output HDMI1
[ 6.386] (II) intel(0): EDID for output DP1
[ 6.386] (II) intel(0): Output eDP1 connected
[ 6.386] (II) intel(0): Output VGA1 connected
[ 6.386] (II) intel(0): Output HDMI1 disconnected
[ 6.386] (II) intel(0): Output DP1 disconnected
[ 6.386] (II) intel(0): Using user preference for initial modes
[ 6.386] (II) intel(0): Output eDP1 using initial mode 1920x1080
[ 6.386] (II) intel(0): Output VGA1 using initial mode 1920x1200_60.00
[ 6.386] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 6.386] (**) intel(0): Display dimensions: (290, 160) mm
[ 6.386] (**) intel(0): DPI set to (336, 190)
[ 6.386] (II) Loading sub module "dri2"
[ 6.386] (II) LoadModule: "dri2"
[ 6.387] (II) Module "dri2" already built-in
[ 6.387] (==) Depth 24 pixmap format is 32 bpp
[ 6.387] (II) intel(0): SNA initialized with IvyBridge backend
[ 6.387] (==) intel(0): Backing store disabled
[ 6.387] (==) intel(0): Silken mouse enabled
[ 6.387] (II) intel(0): HW Cursor enabled
[ 6.387] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 6.388] (==) intel(0): DPMS enabled
[ 6.388] (II) intel(0): [DRI2] Setup complete
[ 6.388] (II) intel(0): [DRI2] DRI driver: i965
[ 6.388] (II) intel(0): direct rendering: DRI2 Enabled
[ 6.388] (WW) intel(0): Option "PreferredMode" is not used
[ 6.388] (WW) intel(0): Option "Primary" is not used
[ 6.388] (WW) intel(0): Option "Position" is not used
[ 6.388] (==) intel(0): hotplug detection: "enabled"
[ 6.388] (--) RandR disabled
[ 6.410] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 6.410] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 6.410] (II) AIGLX: enabled GLX_ARB_create_context
[ 6.410] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 6.410] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 6.410] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 6.410] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 6.410] (II) AIGLX: Loaded and initialized i965
[ 6.410] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 6.411] (II) intel(0): switch to mode 1920x1080 on crtc 3 (pipe 0)
[ 6.500] (II) intel(0): switch to mode 1920x1200 on crtc 5 (pipe 1)
[ 6.663] (II) intel(0): Setting screen physical size to 1016 x 317
[ 6.703] (II) config/udev: Adding input device Video Bus (/dev/input/event10)
[ 6.703] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 6.703] (II) LoadModule: "evdev"
[ 6.704] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 6.706] (II) Module evdev: vendor="X.Org Foundation"
[ 6.706] compiled for 1.13.0, module version = 2.7.3
[ 6.706] Module class: X.Org XInput Driver
[ 6.706] ABI class: X.Org XInput driver, version 18.0
[ 6.706] (II) Using input driver 'evdev' for 'Video Bus'
[ 6.706] (**) Video Bus: always reports core events
[ 6.706] (**) evdev: Video Bus: Device: "/dev/input/event10"
[ 6.706] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 6.706] (--) evdev: Video Bus: Found keys
[ 6.706] (II) evdev: Video Bus: Configuring as keyboard
[ 6.706] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:09/input/input10/event10"
[ 6.706] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 6)
[ 6.706] (**) Option "xkb_rules" "evdev"
[ 6.706] (**) Option "xkb_model" "evdev"
[ 6.706] (**) Option "xkb_layout" "us"
[ 6.732] (II) config/udev: Adding input device Sony Vaio Keys (/dev/input/event3)
[ 6.732] (**) Sony Vaio Keys: Applying InputClass "evdev keyboard catchall"
[ 6.732] (II) Using input driver 'evdev' for 'Sony Vaio Keys'
[ 6.732] (**) Sony Vaio Keys: always reports core events
[ 6.732] (**) evdev: Sony Vaio Keys: Device: "/dev/input/event3"
[ 6.732] (--) evdev: Sony Vaio Keys: Vendor 0x104d Product 0
[ 6.732] (--) evdev: Sony Vaio Keys: Found keys
[ 6.732] (II) evdev: Sony Vaio Keys: Configuring as keyboard
[ 6.732] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/SNY5001:00/input/input3/event3"
[ 6.732] (II) XINPUT: Adding extended input device "Sony Vaio Keys" (type: KEYBOARD, id 7)
[ 6.732] (**) Option "xkb_rules" "evdev"
[ 6.732] (**) Option "xkb_model" "evdev"
[ 6.732] (**) Option "xkb_layout" "us"
[ 6.732] (II) config/udev: Adding input device Sony Vaio Jogdial (/dev/input/event4)
[ 6.732] (II) No input driver specified, ignoring this device.
[ 6.732] (II) This device may have been added with another device file.
[ 6.733] (II) config/udev: Adding input device Sony Vaio Jogdial (/dev/input/mouse0)
[ 6.733] (II) No input driver specified, ignoring this device.
[ 6.733] (II) This device may have been added with another device file.
[ 6.733] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 6.733] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 6.733] (II) Using input driver 'evdev' for 'Power Button'
[ 6.733] (**) Power Button: always reports core events
[ 6.733] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 6.733] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 6.733] (--) evdev: PowerHave you ever tried 'arandr'? It's a GUI for xrandr; it could be useful.
I used this config with nouveau, now I've successfully created my xorg.conf with nvidia blobs, but this one worked~
Section "Device"
Identifier "NVIDIA GeForce GT320"
Driver "nouveau"
Option "Monitor-DVI-I-1" "BENQ G2450"
Option "Monitor-HDMI-1" "LG W2442PA"
EndSection
Section "Monitor"
Identifier "BENQ G2450"
Option "Primary" "true"
Option "PreferredMode" "1920x1080"
Option "TargetRefresh" "60"
Option "Position" "1080 612"
EndSection
Section "Monitor"
Identifier "LG W2442PA"
Option "LeftOf" "BENQ G2450"
Option "PreferredMode" "1920x1080"
Option "TargetRefresh" "59.9"
Option "Position" "0 0"
Option "Rotate" "Left"
EndSection
Section "Screen"
Identifier "Primary Screen"
Device "NVIDIA GeForce GT320"
Monitor "BENQ G2450"
DefaultDepth 24
SubSection "Display"
Depth 24
Virtual 3000 1920
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Primary Screen"
EndSection
I'm using XFCE as well, 2 monitors, the left one rotated 90º. The main difference it's that I've the 'Virtual' option inside 'SubSection'; not sure if it's relevant. -
T400 dual monitors to standard display switch?
Hello...
I have a T400 I bought in August 2009 running Windows XP. When I am home, I use my T400 in conjunction with a second dual display that acts as an extended desktop. I also like to take the laptop with me. The problem is that every time I return home to connect my external screen, I have to go through this whole process in Catalyst Control Center to configure the extended display, along with its respective resolution, which monitor is primary and secondary, etc. On another laptop, this process happens automatically, detecting the monitor correctly. If this can't be done automatically, could someone please walk me through how to set this up so it can be seamless? It seems like this should be very easy but I can't figure it out for the life of me!
Thanks for any help.
Best wishes,
MavecAs far as completely automatic, you may or may not be able to have a reliable experience. BUT the good news is that the Thinkpad Presentation Director utility can make this a "one click" choice rather than completely reconfiguring your displays every time you reconnect. The utility should already be installed on your machine, most likely in the Thinkvantage section. If it is not, just go to the Lenovo site and in the support section for your machine you can download it. Once installed just run through its wizard to set your displays for the way you want them (resolution, primary, extended etc) and it will have you give that a name- from then on when you connect at home you just click on the icon in the taskbar, select that named profile and you are done. Really works quite well and is pretty painless.
-
Dual monitor problem (without using two monitors)
Ok the problem is not with a second monitor not working. The problem is I don't have a second monitor hooked up anymore and the computer still thinks there is still one there.
I hooked a second monitor up to my work computer to help with some work I was doing. Because it was my personal monitor and I was using it on my computer at work I didnt want to leave it there so I disconnected it and took it home when I was done.
Now when I click display preferences>displays on the work computer it still has an option to arrange the second monitor and set all the settings on it even though its not hooked up anymore. This wouldnt be annoying except for the fact if I move my mouse over too far to the right I lose it and sometime is gets "stuck" on the second monitor and I have to restart my computer.
My question is, is there any way to remove the "second display" option from the computer because i dont plan to have a second monitor hooked up again.
Thanks in advance
RussellTry resetting parameter RAM.
http://docs.info.apple.com/article.html?path=Mac/10.6/en/26871.html -
[SOLVED] Fluxbox − some items aren't displayed
Hi, some items are not displayed in Fluxbox’s menu, even after I’ve “Regen menu”.
These items are google-chrome (AUR) and transmission-gtk. Help would be appreciated I currently need to use “Run”, except for google-chrome that I’ve put into ~/.fluxbox/menuconfig.
And also, since I’ve lastly ”Regen menu” this option, Regen menu, have disappeared, also I got empty and useless menus that are categories of software for which I don’t have any software. What is wrong with Fluxbox?
Last edited by adieulot (2012-04-04 08:37:25)I don't know how you've edited your Fluxbox menu, but by the sound of it you used some tool or another. Take a look at your fluxbox menu config file (~/.fluxbox/menu.xml) and correctly configure it as outlined on the wiki page.
-
[SOLVED]Getting Dual Monitors To With Nvidia Cards Under Arch
Just got a second monitor and I am trying to set it up to work with arch.
I have 2 nvidia cards with 1 monitor plugged into each.
Reading through the wiki: https://wiki.archlinux.org/index.php/DualScreen
When I try
xrandr -q
after downloading and installing:
pacman -S xorg-xrandr arandr
I get the message:
RandR extension missing
So not sure what is going on here... (***EDIT: Worked after rebooting***)
Output for:
xrandr -q
is:
Screen 0: minimum 8 x 8, current 1920 x 1200, maximum 16384 x 16384
DVI-I-0 disconnected primary (normal left inverted right x axis y axis)
DVI-I-1 disconnected (normal left inverted right x axis y axis)
DVI-I-2 connected 1920x1200+0+0 (normal left inverted right x axis y axis) 518mm x 324mm
1920x1200 60.0*+
1920x1080 50.0
1680x1050 60.0
1600x1200 60.0
1440x900 75.0 59.9
1280x1024 75.0 60.0
1280x960 60.0
1280x800 59.8
1280x720 60.0 50.0
1152x864 75.0
1024x768 75.0 70.1 60.0
800x600 75.0 72.2 60.3 56.2
720x576 50.0
720x480 59.9
640x480 75.0 72.8 59.9
HDMI-0 disconnected (normal left inverted right x axis y axis)
DVI-I-3 disconnected (normal left inverted right x axis y axis)
The above indicates, I believe, that arch is not seeing my second monitor...
However, it does see both monitors when I plug them both into 1 card:
Screen 0: minimum 8 x 8, current 1920 x 1200, maximum 16384 x 16384
DVI-I-0 disconnected primary (normal left inverted right x axis y axis)
DVI-I-1 disconnected (normal left inverted right x axis y axis)
DVI-I-2 connected 1920x1200+0+0 (normal left inverted right x axis y axis) 520mm x 320mm
1920x1200 60.0*+
1920x1080 50.0
1680x1050 60.0
1600x1200 60.0
1440x900 75.0 59.9
1280x1024 75.0 60.0
1280x960 60.0
1280x800 59.8
1280x720 60.0 50.0
1152x864 75.0
1024x768 75.0 70.1 60.0
800x600 75.0 72.2 60.3 56.2
720x576 50.0
720x480 59.9
640x480 75.0 72.8 59.9
HDMI-0 disconnected (normal left inverted right x axis y axis)
DVI-I-3 connected (normal left inverted right x axis y axis)
1920x1200 60.0 +
1600x1200 60.0
1280x1024 60.0
1280x960 60.0
1024x768 60.0
800x600 60.3 56.2
640x480 59.9
Since I have 2 gfx cards the card info is:
02:00.0 VGA compatible controller: NVIDIA Corporation GF114 [GeForce GTX 560 Ti] (rev a1)
03:00.0 VGA compatible controller: NVIDIA Corporation GF114 [GeForce GTX 560 Ti] (rev a1)
Since I am using 2 different cards I am supposed to add:
Section "Device"
Identifier "Screen0"
Driver "nvidia"
BusID "PCI:02:00.0"
EndSection
Section "Device"
Identifier "Screen1"
Driver "nvidia"
BusID "PCI:03:00.0"
EndSection
To:
/etc/X11/xorg.conf.d/10-monitor.conf
Section "ServerLayout"
Identifier "DualSreen"
Screen 0 "Screen0"
Screen 1 "Screen1" RightOf "Screen0" #Screen1 at the right of Screen0
Option "Xinerama" "1" #To move windows between screens
EndSection
Section "Monitor"
Identifier "Monitor0"
Option "Enable" "true"
EndSection
Section "Monitor"
Identifier "Monitor1"
Option "Enable" "true"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
Screen 0
EndSection
Section "Device"
Identifier "Device1"
Driver "nvidia"
Screen 1
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "0"
SubSection "Display"
Depth 24
Modes "1280x800_75.00"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Device1"
Monitor "Monitor1"
DefaultDepth 24
Option "TwinView" "0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
I am not clear on how to merge these two snippets together properly...
To be honest I am somewhat confused about this whole process... If anyone has a more clear link or can explain the steps better to me I would greatly appreciate it. Maybe I just have to read through it a few more times. Thanks in advance.
Last edited by soulrainX (2013-05-07 13:17:38)This is how I have it thus far:
/etc/X11/xorg.conf.d/10-monitor.conf
Section "ServerLayout"
Identifier "DualSreen"
Screen 0 "Screen0"
Screen 1 "Screen1" RightOf "Screen0" #Screen1 at the right of Screen0
Option "Xinerama" "1" #To move windows between screens
EndSection
Section "Monitor"
Identifier "Monitor0"
Option "Enable" "true"
EndSection
Section "Monitor"
Identifier "Monitor1"
Option "Enable" "true"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
BusID "PCI:02:00.0"
Screen 0
EndSection
Section "Device"
Identifier "Device1"
Driver "nvidia"
BusID "PCI:03:00.0"
Screen 1
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "0"
SubSection "Display"
Depth 24
Modes "1920x1200_75.00"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Device1"
Monitor "Monitor1"
DefaultDepth 24
Option "TwinView" "0"
SubSection "Display"
Depth 24
EndSubSection
EndSection -
Minor UI Bug: Using Dual Monitor File menu Displays on other monitor.
I Currently have the Browser on my right side monitor. When I click file the file menu shows up on my left side monitor,but it should be showing where the browser is, which is on the right side.
Hi,
If you go to the preview view and click restore, will the window go back to your screen?
Thanks.
Jeremy Wu
TechNet Community Support -
Can't get dual monitors to come back up when docking. T500 with mini dock & XP
I have a T500 with XP installed. I am using it docked into a mini dock attached to two 20inch Viewsonic monitors. One connected via VGA and the other DVI. I setup the dual monitors just fine. Anytime after I undock and boot up the laptop I can't get the dual monitors to automatically display. I have to go into the display properties and re set it up each time. Can anyone suggest any ideas?
When your T500 power-on , press F1 to log in BIOS, and change the option in >config>Display>Boot-Display-Device to Both or VGA, I suppose that it will reslove your problem.
-
HP Pavilion dv7-2250ed and dual monitor setup
Good evening,
Currently I own a HP Pavilion dv7-2250ed notebook using a dual monitor setup (notebook display + extra monitor)
I wondered if it would be possible to hook 2 monitors to this laptop? (notebook display + extra monitor + extra monitor)
If this causes the problem, the notebook display isn't requered.
Also, if not, is there a dockingstation for this brand which supports the above?
Kind Regards,
Cor van Noorloos
Edit: a note to the devs of these forums, using multiple tags is done by comma's, not by spaces. You might wish to rephrase this phrase.wgarn wrote:
I have attempted to connect one monitor via HDMI and the other one via the VGA interface.
Using Windows 7 OS and "default configurations" (Control Panel\Appearance and Personalization\Display\Screen Resolution) it is possible to use both external monitors as desktop. However the laptop screen will go blank. So at any time it appears to be possible to have an extended desktop with only two screens.
- Does HP have any drivers/solutions that make it possible to extend the desktop from "Mobile PC" display to two additional desktops?
- Has anyone tried third party software (e.g.. UltraMon)?
- Is there a technical restriction (e.g.. Videocard capability)?
- How about using a Linux OS (e.g.. Ubuntu)?
- What external Hardware exists that would enable me to extend my desktop to three or more monitors simultaneously?
Many thanks in advance.
It's the graphics card and the number of physical connections available. You might have 3 connections (notebook display being one) but the graphics card likely does not support more than 2 monitors. Intel graphics only support 2, however you may be able to find some AMD chips that will support more however that would be a major upgrade.
________________________________________________________________________________________________________ I Love Kudos! If you feel my post has helped you please click the White Kudos! Star just below my name
If you feel my answer has fixed your problem please click 'Mark As Solution' and make it easier for others to find help quickly -
Lost Dual Monitor capabilites after recent update
After a recent update, our terminal server users no longer have the ability to have actual dual monitor capability without it just spanning over two screens. Has anyone else experienced this? Is there a fix for this?
Hi,
Thanks for posting in Windows Server Forum.
As this thread has been quiet for a while, we assume that the issue has been resolved. At this time, we will mark it as ‘Answered’ as the previous steps should be helpful for many similar scenarios. If the issue still persists, please feel free to reply
this post directly so we will be notified to follow it up.
BTW, we’d love to hear your feedback about the solution. By sharing your experience you can help other community members facing similar problems.
Thanks for your Support & understanding.
Regards.
Dharmesh Solanki
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Maybe you are looking for
-
Entourage - I can no longer access my email.
I get an error message that tells me my username or password is incorrect. The only way I can get my email is via Google (gmail email address that I have heretofore accessed via Entourage). I have shut down my compuetr and restarted, shut down Ento
-
How do I select a range of rows from an internal table in the debugger?
Hi, I have a case where I wanted to delete a range of rows (several thousand) from an internal table using the debugger. It seems that rows can only be selected one at a time by selecting (clicking) on the far left side of the row. This is cumbersome
-
Whenever i try to open firefox, i get a message that firefox cannot install the upgrade because another instance of firefox is running. Then firefox 3.6.2 will start. running windows 7 64 bit. This will occur every time i try to open firefox, after r
-
MB_SELECT_GR_BLOCKED_STOCK problem
Hi all , i am facing a problenm in using the function module 'MB_SELECT_GR_BLOCKED_STOCK' code is as below DATA: BEGIN OF xtab2 OCCURS 10, werks LIKE ekpo-werks, matnr LIKE ekpo-matnr, ebeln LIKE ekpo-ebeln,
-
Hi, I have a question about the "action" attribute of the htmlb form object. Is it a relative or absolute path that the action attribute expects? <hbj:form action="nextjsp.jsp"> or <hbj:form action="pagelet.jsp"> I've tried the JSPDynPage exa