[SOLVED] Gnome3 gconf-editor "This key has no schema"
I am using gnome3 and I tried to enable the minimize and maxmize button, so I type
gconftool-2 -s -t string /desktop/gnome/shell/windows/button_layout ":minimize,maximize,close"
in terminal.
Then I open gconf-editor, select "/desktop/gnome/shell/windows/button_layout" , it shows "The key has no schema". And there is no minimize and maximize button on my window.
What's wrong with it? Should I install any package to solve it?
Last edited by tony412 (2012-06-06 09:33:43)
tony412 wrote:
I am using gnome3 and I tried to enable the minimize and maxmize button, so I type
gconftool-2 -s -t string /desktop/gnome/shell/windows/button_layout ":minimize,maximize,close"
in terminal.
Then I open gconf-editor, select "/desktop/gnome/shell/windows/button_layout" , it shows "The key has no schema". And there is no minimize and maximize button on my window.
What's wrong with it? Should I install any package to solve it?
Starting from gnome 3.4 (maybe), the setting of windows button_layout has been changed to donf-config with the path of:
org.gnome.shell.overrides.button-layout
Similar Messages
-
I connected my sons Ipod Touch to my pc and it worked fine. Now, when I try to connect my iPad the following message comes up: One of the usb devices attached to this computer has malfunctioned, and Windows does not recognize it. For assistance in solving this problem, click this message.
I checked the cable. It surely is not the cable. If I connect the iPod again it works fine. If I use the same cable with my pc and ipad at work or my other son’s laptop, it is working perfectly. It is only on my laptop where the iPod was connected. Something tells me it got something to do with the drivers that went corrupt or something when I connected the iPod.
I searched the internet and I see a lot of people gets this message. Still no solved answers yet. Is there a place where I can download the drivers again or any other suggestions?
Windows 7 and iPad 2
Kind regards,I was hoping it would be something like a USB device conflict, but now the shuffle is the only thing connected...
This article was one of the ones you linked to above in your initial post
http://support.apple.com/kb/TS1369
Under Part 9. Verify that USB drivers are installed, did you try the steps in If only "Unknown Device" appears? That appears to be your situation.
Also, you said that the shuffle initially worked well enough to do a sync, then it had the same problem again. If you can get it to work again initially, before doing anything else, try the following. Select the shuffle in the iTunes sidebar, under DEVICES. Over to the right, go to the Summary tab. By default, the checkbox for Enable disk use should be unchecked. If so, check it and Apply the change. See if that makes any difference.
(If Enable disk use was already checked, try unchecking it and Apply the change. Basically, set it the "other way" and see if there is any improvement.)
NOTE: When disk use is enabled, you have to eject the iPod in iTunes before disconnecting it physically.
If the disk use change makes a difference, that may provide a clue about the actual cause. -
Using iPod shuffle 4th generation for first time and receiving the error : one of the USB devices attached to this computer has malfunctioned, and windows does not recognize it. For assistance in solving this problem, click this message.
Using win 7 and latest iTunes [10.6.3]. Have already gone through below links and did not find any solution.
http://support.apple.com/kb/HT2292
http://support.apple.com/kb/TS1369
http://support.apple.com/kb/HT1923
http://en.kioskea.net/forum/affich-17997-ipod-not-detectedI was hoping it would be something like a USB device conflict, but now the shuffle is the only thing connected...
This article was one of the ones you linked to above in your initial post
http://support.apple.com/kb/TS1369
Under Part 9. Verify that USB drivers are installed, did you try the steps in If only "Unknown Device" appears? That appears to be your situation.
Also, you said that the shuffle initially worked well enough to do a sync, then it had the same problem again. If you can get it to work again initially, before doing anything else, try the following. Select the shuffle in the iTunes sidebar, under DEVICES. Over to the right, go to the Summary tab. By default, the checkbox for Enable disk use should be unchecked. If so, check it and Apply the change. See if that makes any difference.
(If Enable disk use was already checked, try unchecking it and Apply the change. Basically, set it the "other way" and see if there is any improvement.)
NOTE: When disk use is enabled, you have to eject the iPod in iTunes before disconnecting it physically.
If the disk use change makes a difference, that may provide a clue about the actual cause. -
How to fix this. Happens even when firewall is disabled. (Apple TV 1st generation)
Apple TV: "Check that any firewall software running on this computer has been set to allow communication on port 3689" alert in WindowsAfter a few hours the same issue started again. (Port 3689 error) I checked my router settings and it shows ATV asd connected to my netrwork. ATV also shows in iTunes devices. It asll works till I try to sync. Then the error pops up
I tired restoring ATV to factory settings. Even backed iTunes up to version 8 and every combonation therein. I started an older Gateway running Vista 64bit and it syncs fine with ATV although it's slow and I have to transfer movies from my Win 7 to tyhe Vista machiner.
I cannot find any reason for this issue. Can anybody solve this before it dribves me crazy? (Crazier) -
This problem has just cropped up - pretty sure it's after the 10.7.3 upgrade.
Scenario: I'm in pages and I'm doing a search. I need to find multiple instances of my search word.
I hold down the command key and press the 'g' key - for find again. It works.
While still holding down the command key - I hit the 'g' key again to do another find again. But instead of executing teh find again, hitting teh 'g' key the sdecond time types "g' over last search item found, acting as if teh command key was not still pessed.
This is happening in DreamWeaver CS5.5, the latest Pages, and the latest BBEdit. Haven't checked all apps.
This IS NOT a problem in the finder though - where command-tabbing brings up the app list properly, and tabs through while holding down teh command key and repeatedly hitting the tab key.
I restarted in safe mode. Still a problem.
First I cleaned the command key, then re-seating the key. I swapped keyboards, Still a problem.
Did a PRAM reset, which didn't fix anything.
I can't find any other post regarding this issue. Been using the mac for over 25 years and I've never seen this one.This turns out to be a problem with my KVM switcher. The USB port on the switcher for the keyboard is failing - hence the intermittent reaction to the command-key presses.
I connected the keyboard directly to my mac and the problem was resolved - sorry I didn't check that before I posted this. -
[SOLVED] trying to change cursor theme and gconf-editor wont work
i am trying to change my cursor theme in my arch setup with gnome i have put the cursor theme in /usr/share/icons/ and now i am trying to use gconf-editor to change the theme but when i start gconf-editor it doesnt give me the option of desktop in the sidebar under / it only gives me the options of apps and schemas i have been very impressed with you guys so far please could you tell me how to fix this or another way of changing my cursor theme
Thanks
icyfox101
Last edited by icyfox101 (2013-05-29 09:31:09)Doesnt matter have fixed it myself
-
Here's the situation:
Upgrading a SharePoint Server 2010 Search Service Application dB to our SharePoint 2013 SP 1 development environment, using the Management Shell
Running the following commands:
$applicationPool= Get-SPServiceApplicationPool -Identity 'SearchService_AppPool'
$searchInst = Get-SPEnterpriseSearchServiceInstance -local
Restore-SPEnterpriseSearchServiceApplication -Name 'SearchServiceApplication' -applicationpool $applicationPool -databasename 'SearchServiceApplicationDB' -databaseserver SERVERNAME -AdminSearchServiceInstance $searchInst
Creates the search dBs (crawl, links, analytics) successfully; however, in the end, I get....
"Exception: Action 15.0.107.0 of Microsoft.Office.Server.Search.Upgrade.SearchAdminDatabaseSequence failed."
Looking at the ULS logs, I find the following:
Inner Exception: An item with the same key has already been added.
at System.Collections.Generic.Dictionary`2.Insert(TKey key, TValue value, Boolean add) at Microsoft.Office.Server.Search.Administration.OOTBSchemaDefinition.FindAndFixExistingManagedProperties() at Microsoft.Office.Server.Search.Administration.OOTBSchemaDefinition.InstallManagedProperties(Boolean
upgrade) at Microsoft.Office.Server.Search.Administration.OOTBSchemaDefinition.Upgrade() at Microsoft.Office.Server.Search.Upgrade.UpdateAllOOTBProperties.Upgrade() at Microsoft.SharePoint.Upgrade.SPActionSequence.Upgrade()
Exception: Action 15.0.107.0 of Microsoft.Office.Server.Search.Upgrade.SearchAdminDatabaseSequence failed.
at Microsoft.SharePoint.Upgrade.SPActionSequence.Upgrade() at Microsoft.SharePoint.Upgrade.SPDatabaseSequence.Upgrade() at Microsoft.Office.Server.Search.Upgrade.SearchDatabaseSequence.Upgrade() at Microsoft.SharePoint.Upgrade.SPUpgradeSession.Upgrade(Object
o, Boolean bRecurse)
Anyone encounter anything like this during their search upgrade process? I'm not honestly even sure what duplicate value to look for at this point, if I were to run a SELECT Id, ClassId, ParentId, Name, Status, Version, Properties FROM Objects on
"SharePoint_Config" in SSMS. Any insight or opinions on the matter are welcome; and thanks to those who choose to reply to this, in advance.Hi ,
You can enable the ULS log on verbose level (note, remember to reset to default level after finished troubleshooting) for more information per the following article, then check there should be more useful message for helping solve the issue.
http://www.brightworksupport.com/enabling-verbose-logging-to-compare-against-c/
http://social.technet.microsoft.com/Forums/sharepoint/en-US/12c99279-d3aa-46de-bc57-d5d250692ff0/upgrade-of-search-service-application-from-2010-to-2013-failure?forum=sharepointadmin
https://www.simple-talk.com/blogs/2014/04/22/sharepoint-2010-to-2013-search-service-application-upgrade-issueaction-15-0-80-0-fails/http://blogs.msdn.com/b/biyengar/archive/2009/10/27/psconfig-failure-with-error-an-item-with-the-same-key-has-already-been-added.aspx
Thanks,
Daniel Yang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]
Daniel Yang
TechNet Community Support -
Error Message "This Item has not been purchased"
I just bought a brand new computer with Windows 7 and I just downloaded Itunes. I couldn't remember my itunes password so I changed my password. After changing my password, I changed my Email address since I was using an old one I don't have access to anymore. After doing that I started trying to get my old purchases put on my new computer and maybe 40 songs downloaded before I got an error saying "This item has not been purchased with your Apple ID". These songs are listed in my purchased list, I bought them on my old computer and Itunes isn't letting me download nearly 300 songs that I paid for.
How do I fix this?Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting. -
Errors in the OLAP storage engine: A duplicate attribute key has been found when processing
Hi dear MSDN Community,
I am facing a problem while processing a cube with a customer hierarchy as follows:
Global Account --> Main Customer --> Master Customer --> Customer
The data comes from a flatted parent child table, that is, I create an extra column for every level of the hierarchy in the customer view. If a level is empty, then the value is filled with the previous value. Then I can use the property:
HideMemberIf = OnlyChildWithParentName for the intermediate levels (Main and Master Customer)
HideMemberIf = ParentName For the leafs (Customer)
HideMemberIf = never for the root (Global Account)
Consider this example:
Then, for the root level I am using as the key the fields in yellow in order to avoid duplicates. However, I am getting the error message "Errors in the OLAP storage engine: A duplicate attribute key has been found when processing" while processing.
I analyzed the query that SSAS issues to the server (select distinct ....) and I think it should work but it is still failing.
I had similar problems with the intermediate levels but I was able to solve it using a similar procedure.
Any help will be appreciated.
Kind Regards.When are you having this error? While processing the dimension or during cube processing?
http://blog.oraylis.de/2013/08/a-duplicate-attribute-key-has-been-found-during-processing-revisited/
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page -
Intel GMA - turning off rotation access keys has no effect
I want to use ctrl+alt+down and ctrl+alt+up in some application, so I want to turn these access keys off. I did it in Intel Graphics Media Accelerator Driver for Mobile settings but it has no effect - these key combinations still rotate my screen. The settings are correctly remembered.
I tried it on administrator and on normal user account. Anyone knows how to solve this problem?Yes. I have already done it, but it's a workaround, not a solution to this problem. I got used to this key combinations in Eclipse (programming environment). There are a lot of key shortcuts, which I use, so it's hard to choose another one, which is good and free.
When I comes to rotating a screen - I don't need it. I can not even imagine use case when 180 degree screen rotation in laptop would be useful :) -
[SOLVED] [GNOME3] How to add applets to the panel
I'm using GNOME 3 in fallback mode, and I can't figure out how can I add or remove applets to gnome-panel. I can't find any GUI tool for do that, and I can't add dconf settings also (with dconf-editor I could set existing values only). Could someone help me?
Last edited by City-busz (2011-04-11 14:10:47)LeCrayonVert wrote:Same thing here on my laptop... I dunno why, cause alt+right click works fine on another computer...
Maybe you changed the key /apps/metacity/general/mouse_button_modifier in gconf-editor. I had changed it to <Super>, resetting it to the default (<Alt>) made Alt+Right-Click work. (at least, for some time after the session starts, but it may be an other problem).
P.S.: See this thread : https://bbs.archlinux.org/viewtopic.php?id=117978
Last edited by Niavlys (2011-05-13 13:55:25) -
Arrow key has fallen off Pavillion 1200dx
An arrow key has fallen off my Pavillion 1299dx keyboard. What is the best method to secure the key back onto the keyboard?
This question was solved.
View Solution.Hi:
This website has videos on how to reattach keys.
If you put the full model number in the site, you will find the video for your key type.
1200dx isn't enough info.
http://www.laptopkey.com/blog/ -
My computer
Problem description:
My macbook pro since this afternoon has been slower, every application I open, it takes a long time to open, and shows the spinning beach ball for a while before it opens or performs some task, or responds to a click…
EtreCheck version: 2.1.8 (121)
Report generated 31 de março de 2015 18:29:15 BRT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
MacBook Pro (13-inch, Early 2011) (Technical Specifications)
MacBook Pro - model: MacBookPro8,1
1 2.3 GHz Intel Core i5 CPU: 2-core
16 GB RAM Upgradeable
BANK 0/DIMM0
8 GB DDR3 1333 MHz ok
BANK 1/DIMM0
8 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Battery Health: Normal - Cycle count 250
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 512 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10.2 (14C1514) - Time since boot: 0:25:47
Disk Information: ℹ️
Hitachi HTS545032B9A302 disk0 : (320,07 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 318.84 GB (47.94 GB free) - 51 errors
Core Storage: disk0s2 319.21 GB Online
MATSHITADVD-R UJ-898
USB Information: ℹ️
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. FaceTime HD Camera (Built-in)
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[loaded] com.oracle.java.Java-Updater.plist [Click for support]
[running] com.trusteer.rapport.rapportd.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[loaded] com.adobe.SwitchBoard.plist [Click for support]
[loaded] com.microsoft.office.licensing.helper.plist [Click for support]
[loaded] com.oracle.java.Helper-Tool.plist [Click for support]
[loaded] com.oracle.java.JavaUpdateHelper.plist [Click for support]
[running] com.trusteer.rooks.rooksd.plist [Click for support]
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[loaded] com.adobe.ARM.[...].plist [Click for support]
[loaded] com.google.keystone.agent.plist [Click for support]
[running] com.spotify.webhelper.plist [Click for support]
User Login Items: ℹ️
iTunesHelper UNKNOWN Hidden (missing value)
AdobeResourceSynchronizer Application Hidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
Stickies Application (/Applications/Stickies.app)
Internet Plug-ins: ℹ️
JavaAppletPlugin: Version: Java 8 Update 31 Check version
FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]
Default Browser: Version: 600 - SDK 10.10
AdobePDFViewerNPAPI: Version: 10.1.13 [Click for support]
AdobePDFViewer: Version: 10.1.13 [Click for support]
Flash Player: Version: 17.0.0.134 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.4.8 - SDK 10.6 [Click for support]
Google Earth Web Plug-in: Version: 7.1 [Click for support]
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
iPhotoPhotocast: Version: 7.0 - SDK 10.8
User internet Plug-ins: ℹ️
npsf_cef: Version: sf 3.3.1.1 [Click for support]
Google Earth Web Plug-in: Version: Unknown
Safari Extensions: ℹ️
DivX HiQ
DivX Plus Web Player HTML5 <video>
3rd Party Preference Panes: ℹ️
Flash Player [Click for support]
Java [Click for support]
MacFUSE [Click for support]
Perian [Click for support]
Trusteer Endpoint Protection [Click for support]
Time Machine: ℹ️
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 318.84 GB Disk used: 270.90 GB
Destinations:
Time Machine Backups [Local]
Total size: 999.86 GB
Total number of backups: 60
Oldest backup: 2012-07-15 01:16:54 +0000
Last backup: 2015-03-29 19:28:06 +0000
Size of backup disk: Excellent
Backup size 999.86 GB > (Disk size 318.84 GB X 3)
Top Processes by CPU: ℹ️
97% rapportd
3% WindowServer
1% mds
0% fseventsd
0% distnoted
Top Processes by Memory: ℹ️
155 MB Safari
120 MB Finder
86 MB rapportd
86 MB WindowServer
69 MB mds_stores
Virtual Memory Information: ℹ️
12.56 GB Free RAM
2.53 GB Active RAM
428 MB Inactive RAM
1.66 GB Wired RAM
1.04 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Mar 31, 2015, 06:00:15 PM Self test - passed
Mar 31, 2015, 01:13:05 PM /Users/[redacted]/Library/Logs/DiagnosticReports/Microsoft Error Reporting_2015-03-31-131305_[redacted].crash
Mar 31, 2015, 01:05:42 PM /Users/[redacted]/Library/Logs/DiagnosticReports/Microsoft Error Reporting_2015-03-31-130542_[redacted].crash
Mar 31, 2015, 12:24:33 PM /Users/[redacted]/Library/Logs/DiagnosticReports/Microsoft Error Reporting_2015-03-31-122433_[redacted].crash
Mar 30, 2015, 05:45:38 PM /Library/Logs/DiagnosticReports/Skype_2015-03-30-174538_[redacted].cpu_resource .diag [Click for details]
Mar 30, 2015, 01:52:07 PM /Users/[redacted]/Library/Logs/DiagnosticReports/Last.fm Scrobbler_2015-03-30-135207_[redacted].crash
Mar 29, 2015, 05:55:05 PM /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-03-29-175505_[redacted].crash
Mar 29, 2015, 01:06:38 PM /Library/Logs/DiagnosticReports/VLC_2015-03-29-130638_[redacted].hang
Mar 29, 2015, 01:02:47 PM /Library/Logs/DiagnosticReports/VLC_2015-03-29-130247_[redacted].hangOpen Activity Monitor and kill this process - rapportd.
Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Alternatively, see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless. -
Hello,
I have been trying to get Adobe's help for over a month now. I've been on the phone twice to them, opened up three seperate cases and still arrived at no solution. I was bought Photoshop CS4 Extended awhile ago and use it for my studies (I'm an art student). Two months ago my harddrive on my computer failed and I had to have a new laptop. I went to reinstall Photoshop and "Licensing for this product has expired" comes up. I've uninstalled, inreinstalled many times and used Microsoft Fix It Programme for uninstalling to make sure all the files are gone.
Surfing the forums I learned that there should be a folder with back up and Adobe PCD but I don't have that folder at all. The serial number I use is my original serial number that I know works and adobe have even said it's a technical error. What do I do? College starts again in two weeks and I don't have the programme I use for it!Try the License Repair Tool Adobe - Adobe Licensing Repair Tool
Other suggestions if this doesn't work: Error "Licensing has stopped working" | Windows
Also if you must uninstall, use the Adobe CS Cleaner tool, not the Microsoft one. Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 -
"Licensing For this Product Has Expired" (But I just bought it!)
I'm having an installation problem, with Adobe CS4 Design Premium for Windows on Vista(64). For technicality purposes, I believe everything installed fine, but I have not been able to open the programs even once, which apparently means this is an installation issue.
Here's the situation:
I had a trial version of Photoshop CS4, it expired, I uninstalled it (or at least went to Control Panel-->Programs And Features--->"Uninstall"), bought Adobe Premier with my student discount, installed it with the new serial number and the 2 CDs without any problems (so I thought), but now every time I try to open any CS4 Program (Photoshop, Dreamweaver, Illustrator, etc.--anything but Acrobat Pro or Bridge CS4) I get a message saying, 'Licensing for this product has expired.'
I found an equivalent issue with Macs and there appears to be a quick fix:
"The tech had me remove APPLICATION SUPPORT > ADOBE > ADOBE PCD > cache > cache.db (to trash)" This apparently solved the problem.
Does anyone know an equivalent fix for Windows PCs?
I've have tried downloading the fix from the following website:
http://www.adobe.com/support/contact/licensing.html
(Running this multiple times, rebooting, etc.) but I believe the above website is just for problems of "License has stopped working" and not "Licensing for this product has expired"
I also tried setting my laptop's date/time back to May 31st 2009 following these instructions:
http://kb2.adobe.com/cps/494/cpsid_49485.html
but when I do that, I get the original, 'Accept these Terms' page, and as soon as I click "I agree' that page disappears, and nothing else happens. My computer works fine, but the program does not start. Therefore I can't deactivate the program/serial number, reset the correct date, start the program, and enter the proper serial number.
Any chance someone knows the appropriate Windows File to remove to solve this problem? Or have any other advice?
Many thanks in advance,
Kevin
PS--I've tried to stay professional about this situation, but it really has me livid. I'm appalled that something that cost me 300+ dollars (and I am fully aware it costs most honest people significantly more) could have caused me to waste the better part of a day, and get so frustrated, and I am still no closer to a solution. If it doesn't get resolved soon I am tempted to try returning the software as 'defective' (which for all intents and purposes it is) or never buy an Adobe product again. My friends have less trouble with the cracks/keygens/etc out there, and they're up $300+ on me.UPDATE:
So, I took John T. Smith's advice (thanks for the phone number--relatively short wait time compared to the other number I had tried), and called Customer Service. I got the usual run-around, where the first guy wanted me to try all the things I described in the original post. Had me try something else (which involve reinstalling) which didn't work. Finally, the next gal I talked with admitted she didn't know the solution, and the problem would be 'upgraded' to the next higher level of presumably smarter tech people. I asked the time frame for this, and she said 1-2 days, which I wasn't happy about, and finally spoke with her supervisor. This person walked me through the uninstallation, and had 'some files' I should delete. AND FINALLY, I GOT WHAT I WANTED:
He said if I just removed/deleted the following file:
C:\Program Files(x86)\Common Files\Adobe\AdobePCD\Cache\Cache.db
So the order he wanted me to do it was:
Uninstall CS4 Design Premium (with windows vista Program and Features in the Control Panel, remove the above file, restart my computer, and reinstall the software. The reinstall didn't go smoothly the first time or two (early on, it said Illustrator, Photoshop, etc could not be installed..) so I just closed ALL programs, and tried again) and finally everything works, or seems to!
From what I read on a Mac forum with the same problem, it seems like I might not have had to uninstall/reinstall the whole suite (which I wish I'd tried, because it would have saved me nearly 2 hours).
But at any rate, everything seems to be working. I wrongly assumed the PC version would have had a different culprit file to be removed. I wish I'd searched my hard drive for the AdobePCD folder earlier. But...now I am happy.
Cheers, and I hope this post might be of some help to a poor unfortunate lad with the same problem I had.
Maybe you are looking for
-
How can I have unified contacts across outlook, iphone and gmail?
I am new to iPhone and cannot seem to get something that I really enjoyed on my blackberry, unified contacts across all three platforms. I use Outlook for work and Gmail for personal. I had it set up on my blackberry that I had one set of contacts,
-
Fields of .xml file sent to Device Controller
Hi all, Does anybody know how we can specify more fields in the .xml file that is sent to the device controller? At this moment, when we do Comission Tag action, the .xml file only contains EPC data as we show you here below: <?xml version="1.0
-
Why does the Adobe Standard profile make a mess of old NEF files?
Recently I've been reprocessing some old NEF files taken with the Nikon D50 camera years ago, and I was startled to find that the Adobe Standard camera profile does a bad job on them: the photos come out muddy-looking, really unacceptable, with too m
-
9.0.3 JSP DataScroller Error (Not a Missing DataHandler)
I generate the Browse Page/Form for DepartmentsView1. It includes a DataHandler, DataScroller, and DataTable (with the AM and DS tags) as appropriate. I can run this successfully with Netscape 4.77, IE 5.5, IE 6.0.26. However a colleague runs this in
-
Project library clip ends and delay to next clip
Why is there a very slight time lag between clips in my project (not the event library) every time I drag in a new clip to immediately follow a clip and how do I remove that delay?????? So if I am speaking on the clips and that clip comes to it's end