[solved]gnutls: requires readline =6.0

So I take it I can't update the 9 new packages on my system because it is requiring something from testing.
[root@NAVI ~]# pacman -Syyu
:: Synchronizing package databases...
core 33.2K 231.9K/s 00:00:00 [------------------------------------------------------------] 100%
extra 376.6K 661.4K/s 00:00:01 [------------------------------------------------------------] 100%
community 374.2K 663.4K/s 00:00:01 [------------------------------------------------------------] 100%
archlinuxfr 24.5K 54.1K/s 00:00:00 [------------------------------------------------------------] 100%
:: Starting full system upgrade...
resolving dependencies...
error: cannot resolve "readline>=6.0", a dependency of "gnutls"
error: failed to prepare transaction (could not satisfy dependencies)
:: gnutls: requires readline>=6.0
Happens whether that extra repo is in there or not.
Last edited by lifeafter2am (2009-07-01 16:02:08)

jeffreyldavidson wrote:How long does this normally take. I still cannot update because of the readline error. I changed pacman mirrors and it is still the same.
On my one machine I commented out all the mirrors except the official archlinux.org one and it updated quite fine. My other machine still hasn't got it yet though.

Similar Messages

[Solved] ping requires root privilages but only if OS run from RAM

I have an odd situation where I can use ping as a regular user from openbox's autostart if I run the OS from storage disks but not if I load the OS into RAM. It only works for a regular user with the OS loaded to RAM when I set the sticky bit.
Can this be a timing problem with systemd not activating a required service in time?
Last edited by KairiTech (2014-08-26 21:16:45)

Yep! That's it exactly. I create a root file system archive to speed the loading into RAM. See the exact code below:
sudo tar -vzcf /rootfs.tar.gz / --exclude={/rootfs.tar.gz,/boot/*,/var/cache/pacman/pkg/*,/dev/*,/proc/*,/sys/*,/tmp/*,/run/*,/mnt/*,/media/*,/lost+found}
Adding the --xattrs option to tar solved it.
Last edited by KairiTech (2014-08-26 21:17:46)

[SOLVED]: gnutls not found after LXDE install attempt

After issuing the following command as root:
# pacman -S lxde
many console messages ensue, among them:
error: failed retrieving file 'gnutls-2.8.6-1-i686.pkg.tar.xz' from mirror.rit.edu : Not Found
This message is repeated for each of the other five mirrors in my list.
All the other packages seem to have been retrieved all right.
At the end of the process, the following messages appear:
warning: failed to retrieve some files from extra
error: failed to commit transaction (Not Found)
Errors occurred, no packages were upgraded.
I tried
# pacman -S gnutls
and got the same results as above, with the same version number in the error message, and the same three messages at the end.
I searched for gnutls in the package database, and found gnutls to be at version 2.10.4-1 .
I have searched the Arch wiki, forums, and beginner's guide for this issue, with no success, and have tried Googling the Web with various combinations of the words arch, lxde, gnutls, and "not found", also with no success.
This is my first attempt at installing Arch, but not my first experience with Linux. All has gone well up until now; the Arch CLI environment has been functioning well.
[eof]
Last edited by champted (2010-12-20 22:18:55)

Thankx for your fast reply.
Name : pacman
Version : 3.4.1-1
URL : http://www.archlinux.org/pacman/
Licenses : GPL
Groups : base
Provides : None
Depends On : bash libarchive>=2.7.1 libfetch>=2.25 pacman-mirrorlist
Optional Deps : fakeroot: for makepkg usage as normal user
curl: for rankmirrors usage
Required By : None
Conflicts With : None
Replaces : None
Installed Size : 2244.00 K
Packager : Dan McGee <[email protected]>
Architecture : i686
Build Date : Fri 03 Sep 2010 09:12:12 PM EDT
Install Date : Thu 16 Dec 2010 01:34:01 PM EST
Install Reason : Explicitly installed
Install Script : Yes
Description : A library-based package manager with dependency support

[SOLVED]XFCE requires xorg.conf

Hi all,
I was using Zenwalk Linux since 4 years, and made my mind to install Arch Linux. I installed it using the help of Installation Guide. Thanks to the Arch Linux team for providing such a nice descriptive and useful forum through which any newbie can migrate to Arch Linux easily.
I thought of installing XFCE as my Desktop environment as I was using the same previously. I installed LXDM login manager, and the X session I edited to start up with XFCE.
With the login to init 5, I got the error as "Frequency Out of Range" and the screen went blank. Then somehow, I had the xorg.conf and xorg.conf-vesa file of my older Zenwalk System. I copied it to /etc/X11 directory and rebooted to solve the problem.
I dont know whether xorg.conf is needed or not. 'lspci' noted my video driver as
01:00.0 VGA compatible controller: S3 Inc. VT8375 [ProSavage8 KM266/KL266]
I have installed savage-dri and xf86-video-savage from Arch Repo.
I thought of sharing the same so that it might be helpful to someone (or else, if someone can give a better solution, it will be helpful for me too).
Thanks in advance.
With regards,
Ajay Kumar G
Last edited by ajaykumar (2012-09-18 02:02:18)

I'm not surprised that an old card would require an xorg.conf file to work correctly. Do you mean that another desktop environment from the Arch repos can work on your system without an xorg.conf? And only XFCE results in an error? Then that would be weird.

Hi sap master plz solve my requirement

hi
masters
my client watns a requirement
in g/l line item display(fbl3n) he wants the offsetting account no or long text
plz give me the answer
thank you

Hi,
in fbl3n execute
then it will display report in that select layout and select offestting entry so if data is there it will display
If it is usefull please assign points
Thanks
Ram

[SOLVED] missing required signature

i am not sure this is the right forum but i do'nt find a better one.
i had a power failure during kernel update and i can't login.
i chrooted from fedora 17 installation disk and tried
pacman -Syu
and i got this error
(40/40) checking package integrity [###########################] 100%
error: GPGME error: Inappropriate ioctl for device
error: GPGME error: Inappropriate ioctl for device
error: GPGME error: Inappropriate ioctl for device
error: GPGME error: Inappropriate ioctl for device
error: GPGME error: Inappropriate ioctl for device
error: GPGME error: Inappropriate ioctl for device
error: GPGME error: Inappropriate ioctl for device
error: GPGME error: Inappropriate ioctl for device
error: GPGME error: Inappropriate ioctl for device
error: GPGME error: Inappropriate ioctl for device
error: GPGME error: Inappropriate ioctl for device
error: GPGME error: Inappropriate ioctl for device
error: GPGME error: Inappropriate ioctl for device
error: GPGME error: Inappropriate ioctl for device
error: GPGME error: Inappropriate ioctl for device
error: GPGME error: Inappropriate ioctl for device
error: GPGME error: Inappropriate ioctl for device
error: GPGME error: Inappropriate ioctl for device
error: GPGME error: Inappropriate ioctl for device
error: GPGME error: Inappropriate ioctl for device
error: GPGME error: Inappropriate ioctl for device
error: GPGME error: Inappropriate ioctl for device
error: GPGME error: Inappropriate ioctl for device
error: GPGME error: Inappropriate ioctl for device
error: GPGME error: Inappropriate ioctl for device
error: GPGME error: Inappropriate ioctl for device
error: GPGME error: Inappropriate ioctl for device
error: GPGME error: Inappropriate ioctl for device
error: GPGME error: Inappropriate ioctl for device
error: GPGME error: Inappropriate ioctl for device
error: GPGME error: Inappropriate ioctl for device
error: GPGME error: Inappropriate ioctl for device
error: GPGME error: Inappropriate ioctl for device
error: GPGME error: Inappropriate ioctl for device
error: GPGME error: Inappropriate ioctl for device
error: GPGME error: Inappropriate ioctl for device
error: GPGME error: Inappropriate ioctl for device
error: GPGME error: Inappropriate ioctl for device
error: GPGME error: Inappropriate ioctl for device
error: GPGME error: Inappropriate ioctl for device
error: chromaprint: missing required signature
error: ethtool: missing required signature
error: gettext: missing required signature
error: gpgme: missing required signature
error: libassuan: missing required signature
error: libldap: missing required signature
error: libnl: missing required signature
error: libpcap: missing required signature
error: libreoffice-en-GB: missing required signature
error: python: missing required signature
error: libreoffice-common: missing required signature
error: libreoffice-base: missing required signature
error: libreoffice-calc: missing required signature
error: libreoffice-draw: missing required signature
error: libreoffice-gnome: missing required signature
error: libreoffice-impress: missing required signature
error: libreoffice-math: missing required signature
error: libreoffice-postgresql-connector: missing required signature
error: libreoffice-sdk: missing required signature
error: libreoffice-sdk-doc: missing required signature
error: libreoffice-writer: missing required signature
error: linux: missing required signature
error: linux-headers: missing required signature
error: lirc-utils: missing required signature
error: live-media: missing required signature
error: lsof: missing required signature
error: man-pages: missing required signature
error: net-snmp: missing required signature
error: systemd: missing required signature
error: wpa_supplicant: missing required signature
error: networkmanager: missing required signature
error: opencv: missing required signature
error: syslog-ng: missing required signature
error: systemd-sysvcompat: missing required signature
error: totem-plparser: missing required signature
error: tzdata: missing required signature
error: xfce4-eyes-plugin: missing required signature
error: xfdesktop: missing required signature
error: libtaginfo: missing required signature
error: xnoise: missing required signature
error: failed to commit transaction (invalid or corrupted package (PGP signature))
Errors occurred, no packages were upgraded.
i tried
sudo pacman -Syu --gpgdir /etc/pacman.d/gnupg
but no change
is there a way to install the updates without signature or find the missing signatures?
thanks
ezik
Last edited by shulamy (2013-03-11 19:04:16)

SigLevel = Never worked
but now it says there is no disk space when 14 of 22 GB is free.
[root@localhost /]# sudo pacman -S linux
resolving dependencies...
looking for inter-conflicts...
error: could not open file /var/lib/pacman/local/linux-3.8.1-1/desc: No such file or directory
Targets (1): linux-3.8.2-1
Total Installed Size: 62.10 MiB
Proceed with installation? [Y/n] y
(1/1) checking package integrity [######################] 100%
(1/1) loading package files [######################] 100%
(1/1) checking for file conflicts [######################] 100%
error: could not determine filesystem mount points
error: not enough free disk space
error: failed to commit transaction (unexpected error)
Errors occurred, no packages were upgraded.
ezik

[solved] nvidia: requires linux 3.2

pacman -Syu wrote:...
warning: nvidia: ignoring package upgrade (285.05.09-3 => 290.10-2)
warning: nvidia-utils: ignoring package upgrade (285.05.09-1 => 290.10-1)
resolving dependencies...
looking for inter-conflicts...
error: failed to prepare transaction (could not satisfy dependencies)
:: nvidia: requires linux<3.2
I've downgraded nvidia because nvidia-290.10 doesn't work at all for me.
Q: Now, what options do I have?
To cut a long story short...
A: use pacman -Syud
Thanks again, I've learned a lot these days.
Last edited by rtfreedman (2012-01-25 16:49:42)

rtfreedman wrote:
Hm, I don't get pacman to upgrade - ignoring nvidia
I tried 'pacman -Syu --force' to no avail
error: failed to prepare transaction (could not satisfy dependencies)
:: nvidia: requires linux<3.2
I was going to upgrade the kernel, going to init 1 and compiling the nvidia.ko from source.
How do I do it?
I got the same problem, and my solution was:
1) Use pacman -U to install nvidia-290.10-2 and nvidia-utils-290.10-1 (downloaded directly from a mirror). This will force a kernel upgrade.
2) Use pacman -Syu to make entire system up-to-date
3) Use pacman -R nvidia to remove this package
4) Through ABS get the PKGBUILD of nvidia-utils version 290.10 and change the version to 285.05.09
4a) You must also change the md5sum number, for i686 it's 2d469a90abef50320f548cfa8085e3a0
4b) Use makepkg to build the package, and install both created packages (nvidia-utils and opencl-nvidia)
5) Through ABS get the PKGBUILD of nvidia version 290.10 and change the version to 285.05.09 and pkgrel from 1 to 3.
5a) You must also change the md5sum number, for i686 it's 2d469a90abef50320f548cfa8085e3a0
5b) Use makepkg to build the package, and install created package nvidia
6) Edit /etc/pacman.conf add opencl-nvidia to the ignore list
7) Reboot and enjoy
Hope this works for you too.
Ps: Just for the record, I really hate nvidia for not supporting my graphic card anymore...

[SOLVED]packagekit: requires pacman 4.2.0

sudo pacman -Syu
:: Synchronizing package databases...
testing is up to date
core is up to date
extra 1806.5 KiB 775K/s 00:02 [----------------------] 100%
community-testing is up to date
community is up to date
multilib is up to date
:: Starting full system upgrade...
resolving dependencies...
looking for inter-conflicts...
error: failed to prepare transaction (could not satisfy dependencies)
:: packagekit: requires pacman<4.2.0
Last edited by Dmitrii (2014-12-19 23:46:45)

"Works" for me on my 32-bit Arch with [testing] repos enabled. pacman automatically got downgraded back to 4.1.2-7:
$ sudo pacman -S packagekit
resolving dependencies...
looking for conflicting packages...
Package (2) Old Version New Version Net Change Download Size
core/pacman 4.2.0-1 4.1.2-7 -0.53 MiB
community/packagekit 0.7.6-12 6.90 MiB 0.87 MiB
Total Download Size: 0.87 MiB
Total Installed Size: 10.60 MiB
Net Upgrade Size: 6.37 MiB
:: Proceed with installation? [Y/n]
:: Retrieving packages ...
packagekit-0.7.6-12-i686 894.8 KiB 1916K/s 00:00 [###################################] 100%
(2/2) checking keys in keyring [###################################] 100%
(2/2) checking package integrity [###################################] 100%
(2/2) loading package files [###################################] 100%
(2/2) checking for file conflicts [###################################] 100%
(2/2) checking available disk space [###################################] 100%
(1/2) downgrading pacman [###################################] 100%
(2/2) installing packagekit [###################################] 100%
Optional dependencies for packagekit
networkmanager
It has been flagged out-of-date for almost exactly a year: https://www.archlinux.org/packages/comm … ackagekit/ :-)

F4_FILENAME not solving my requirement

Hi All,
I tried with all these but the file name which I want to get is more than 128 chars.
KD_GET_FILENAME_ON_F4
WS_FILENAME_GET
cl_gui_frontend_services=>file_open_dialog
F4_FILENAME.
Please help me with any FM which can get filename more than 128chars
Thanks,
Srik

cl_gui_frontend_services=>file_open_dialog is corect one it can hold up to 1024 chars
DATA: file_tab type FILETABLE WITH HEADER LINE.
DATA: ret_code TYPE i.
CALL METHOD cl_gui_frontend_services=>file_open_dialog
CHANGING
file_table = file_tab[]
rc = ret_code.
IF ret_code NE 0.
READ TABLE file_tab INDEX 1.
WRITE: file_tab-filename. "here 1024 chars are allowed
ENDIF.
Regards
Marcin

[SOLVED] Help required to boot fresh installation. New to GPT.

Hi all,
I have been using Gnu/Linux since 1998 and Arch since 2007.
I stopped playing the pacman gamble game and had left my system for a few months between updates. I reached a state where I thought it was easier to reinstall and decided to back up my home dir and simplify my partitions back to a single / and just /tmp, /var and /home on separate drives. Also it seemed a good time to switch to GPT and use Syslinux boot loader.
I have followed the Official and Beginner's Installation instructions but cannot boot into my newly installed system. I have used /dev/ designations and UUID designations in my syslinux.cfg but when I try to boot into the new system I either get errors saying my root is a raid member or there is no /sbin/init found.
I have then tried repartitioning using standard MBR partitions but get Missing OS errors. Is there a simple path I should follow?
I am using the following drives......
/dev/sdb Kingston 30GB SSD
/dev/sdb1 /
/dev/sda Western Digital 160GB
/dev/sda1 /tmp
/dev/sda2 /var
/dev/sda3 SWAP
/dev/sda4 /home
/dev/sdc Seagate 2TB
/dev/sdc1 RAID Member
/dev/sdd Western Digital 2TB
/dev/sdd1 RAID Member
/dev/sde Western Digital 1TB
/dev/sde1 RAID Member
/dev/sdf Samsung 1TB
/dev/sdf1 RAID Member
I have installed Mint 14 and Neptune 3 on the same drives with no issues but I want to keep using Arch. I am at a loss for what to do next.
I am considering removing all drives except the 30GB SSD and the 160GB /tmp,/var,SWAP,/home drive and trying again.
Can any one hold my hand through this..... please?! I really do not want to drop Arch as it is for me *the* Linux distro.
Honestly though I would appreciate any help. I am going slightly mad!
Diesel1.
I apologise now for any lack of info but it is late and I need sleep.
Last edited by diesel1 (2013-03-28 19:41:23)

s1ln7m4s7r wrote:
Looking into your hd setup, i would recommend: GPT + SYSLINUX
as the / partition.
You say you already tried this setup and couldn't boot it, but it is as easy as it gets. I must say that arch is a "do it yourself distro", so we are not supposed to hold your hand. BUT, we can help you understand what you did wrong, if you missed something, etc.
If you are able to, you can post the steps you made in your attempt to install arch, and then someone will help you with that!
REMEMBER, you should always read the wikis and search the forum to see if anyone gets the same errors as you before posting.
Thanks for the reply. It is kind of you to 'help me understand' what I did wrong!
I tried again with a different partition set-up and re-read the wikis thoroughly. This time it has worked and I am now booted into my GPT+SYSLINUX Arch system.
From what I can see I needed a separate /boot partition on the same disk (30GB SSD) as the / partition. D'oh! It is the simple things that seem to trip me up.
Anyhow, thanks again,
Diesel1.

[SOLVED] Help Required Installing True Type Fonts

I am currently using Xfce4.8 and have installed xorg-fonts-100dpi xorg-fonts-75dpi and type 1 fonts.
Now the fonts in xfce are starting to look good, menu fonts on firefox look good but many webpages
are using ugly non aliased fonts.
I would like to include the ttf-ms-fonts and have found the folowing wiki page:
http://aur.archlinux.org/packages.php?ID=13030
I have installed the dependemcies
fontconfig xorg-font-utils xorg-fonts-encodings
and also just one font:
http://downloads.sourceforge.net/corefonts/verdan32.exe
I am unsure how to install the verdana font so any help appreciated, thanks in advance.
Last edited by hal8000 (2011-05-21 16:05:49)

Thanks Guys, I am now having trouble with makepkg
I have unzipp ttf-ms-fonts
[anc@orac ttf-ms-fonts]$ ls
LICENSE PKGBUILD ttf-ms-fonts.install
When I run makepkg this error appears:
[anc@orac ttf-ms-fonts]$ makepkg
==> ERROR: Fakeroot must be installed if using the 'fakeroot' option
in the BUILDENV array in /etc/makepkg.conf.
So I check contents of /etc/makepkg.conf
--snip--
# BUILD ENVIRONMENT
# Defaults: BUILDENV=(fakeroot !distcc color !ccache check)
# A negated environment option will do the opposite of the comments below.
#-- fakeroot: Allow building packages as a non-root user
#-- distcc: Use the Distributed C/C++/ObjC compiler
#-- color: Colorize output messages
#-- ccache: Use ccache to cache compilation
#-- check: Run the check() function if present in the PKGBUILD
BUILDENV=(fakeroot !distcc color !ccache check)
#-- If using DistCC, your MAKEFLAGS will also need modification. In addition,
#-- specify a space-delimited list of hosts running in the DistCC cluster.
#DISTCC_HOSTS=""
This looks as though option fakeroot is enabled, is there anything else I need to change?

[SOLVED] Help required, unable to set a wallpaper.

Good day, first of all.
Tough new to Arch, i have /some/ experience with gnu/linux, and this is beyond me. I am running arch x86_64 with gnome, loving it. But if i choose an image as a wallpaper i get nothing but the color. Not even the gnome basic images would work, just the colors. Been around looking for a solution for about 3 hours, i appeal to your kindness.
Any ideas?
thanks in advance.
Last edited by evildrake (2009-07-24 16:37:02)

evildrake,
I am having the same problem in kde4, just started after recent update as of today.
May be they are related. Did you just update?
edit:
I found that it was the gtk2 update that has somehow messed things up i believe.
Some message about libjpeg error
edit:
here is the list of updates, one of them broke my desktop:
extra/akonadi version 1.1.2 release 1 -> 2
extra/gegl version 0.0.22 release 1 -> 2
extra/ghostscript version 8.64 release 5 -> 6
extra/gimp version 2.6.6 release 1 -> 2
extra/imlib2 version 1.4.2 release 2 -> 3
extra/jasper version 1.900.1 release 2 -> 3
extra/lcms version 1.18 release 1 -> 2
extra/libdjvu version 3.5.22 release 1 -> 2
extra/libgphoto2 version 2.4.6 release 1 -> 2
extra/libmng version 1.0.10 release 1 -> 2
extra/libtiff version 3.8.2 release 4 -> 5
extra/libwmf version 0.2.8.4 release 4 -> 5
extra/poppler version 0.10.7 release 1 -> 2
extra/sane version 1.0.20 release 2 -> 3
extra/xulrunner version 1.9.1 release 1 -> 2
==> Software upgrade (new version) :
core/sudo 1.7.1-2 -> 1.7.2-1
extra/boost 1.37.0-1 -> 1.39.0-1
extra/gtk2 2.16.2-1 -> 2.16.4-1
extra/imagemagick 6.5.3.2-1 -> 6.5.3.10-1
extra/libcups 1.3.10-2 -> 1.3.11-1
extra/libjpeg 6b-6 -> 7-1
extra/mplayer 29318-1 -> 29411-3
Fortunately, I used clonezilla to back it up first
Maybe one of these will match something that updated on yours
Last edited by orphius1970 (2009-07-14 12:40:13)

How to solve this requirment ...........please need urgent reply

Dear all
I have two columns in al table its data is like the following
example :
stuff description
desk is red with glass
desk is rounded
desk having four legs
chair its color is brown
this is how the data in the table
what i want is to select from the column stuff the thing with the different description for it without repeating this stuff
such as the following :
desk is red with glass
is rounded
having four legs
chair its color is brown
Will you help me in that select please as fast as possiple thnks alot

user513954 wrote:
Will you help me in that select please as fast as possiple thnks alotUrgent is it?
Why? Have you forgotten to do your coursework and you'll get thrown off your course if you don't hand it in today?
What makes you believe that your request for help is more important than someone else who has requested help? It's very rude to assume you are more important than somebody else, and I'm sure they would like an answer to their issue as soon as they can get one too, but they've generally been polite and not demanded that it is urgent.
Also, you assume that people giving answers are all sitting here just waiting to answer your question for you. That's not so. We're all volunteers with our own jobs to do. How dare you presume to demand our attention with urgency.
If you want help and you want it answering quickly you simply just put your issue forward and provide as much valuable information as possible.
Looking at your post you haven't told us what database version you are using, you haven't provided any create table DDL's and insert statements to populate that with sample data, and you haven't even shown us that you've had a go at doing something yourself.
You will find if you post on here demanding your post is urgent then most people will just ignore it, some will tell you to get lost, and some will explain to you why you shouldn't post "urgent" requests. Occasionally you may find somebody who's got nothing better to do who will actually provide you with an answer, but you really are limiting your options by not asking properly.

How to solve this requirment

hi all
thanks in advance
how do following
select-options s_budat like mkpf-budat take dummy not dispaly
display parameter for taking date
and user insert date in parameter this date assing to dummy
select option which are not display
plz
thanks

hi Anand,
check out this code.
data : date like mkpf-budat.
select-options date1 for date.
Hope this code will help you .
By
Pari

[SOLVED] ndiswrapper requires manual install

Hi all,
For some time now I found that, while the ndiswrapper package is up to date in the repository, pacman -S ndiswrapper and variants seem to sync to a less recent version of the package. Manual downloading the package from the archlinux website works, so it's a problem that can be bypassed. But of course, I'm curious what's going on.
I checked /etc/pacman.conf, and there's no entry of ndiswrapper there, so I don't think I accidentally fudged anything?
Thanks.
Last edited by dumas (2013-06-16 10:15:11)

Another example of the problem:
https://bbs.archlinux.org/viewtopic.php … 2#p1285992
After manual upgrade of rxvt-unicode, pacman -Syyu gives
:: Synchronizing package databases...
core 103.4 KiB 44.3K/s 00:02 [#####################] 100%
extra 1506.6 KiB 300K/s 00:05 [#####################] 100%
community 1794.7 KiB 76.2M/s 00:00 [#####################] 100%
:: Starting full system upgrade...
warning: mplayer2: local (20130428-1) is newer than community (20120729-1)
warning: ndiswrapper: local (1.58-11) is newer than community (1.57-20)
warning: reflector: local (2013-1) is newer than community (2012.7.26-1)
warning: rxvt-unicode: local (9.18-5) is newer than community (9.15-3)
there is nothing to do
Irony with the reflector warning!

[solved]gnutls: requires readline =6.0

Similar Messages

Maybe you are looking for