[SOLVED] HHD warnings while booting

Hi,
i get these messages while booting and they destroy the "look" of the normal boot messages:
[ 5.068830] scsi 8:0:0:0: Direct-Access WD 5000KS External 1.06 PQ: 0 ANSI: 0
[ 5.068888] scsi 10:0:0:0: Direct-Access WD 10EAVS External 1.75 PQ: 0 ANSI: 4
[ 5.069158] scsi 9:0:0:0: Direct-Access WD Ext HDD 1021 2002 PQ: 0 ANSI: 4
[ 5.069647] sd 8:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 5.069786] sd 10:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 5.070013] sd 9:0:0:0: [sde] 3907024896 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 5.070254] sd 10:0:0:0: [sdd] Write Protect is off
[ 5.070257] sd 10:0:0:0: [sdd] Mode Sense: 23 00 00 00
[ 5.070390] sd 8:0:0:0: [sdc] Write Protect is off
[ 5.070394] sd 8:0:0:0: [sdc] Mode Sense: 00 00 00 00
[ 5.070756] sd 10:0:0:0: [sdd] No Caching mode page present
[ 5.070882] sd 9:0:0:0: [sde] Test WP failed, assume Write Enabled
[ 5.071008] sd 8:0:0:0: [sdc] Asking for cache data failed
[ 5.071010] sd 8:0:0:0: [sdc] Assuming drive cache: write through
[ 5.071754] sd 9:0:0:0: [sde] Asking for cache data failed
[ 5.071756] sd 9:0:0:0: [sde] Assuming drive cache: write through
[ 5.073033] sd 8:0:0:0: [sdc] Asking for cache data failed
[ 5.073035] sd 8:0:0:0: [sdc] Assuming drive cache: write through
[ 5.073251] sd 9:0:0:0: [sde] Test WP failed, assume Write Enabled
[ 5.074140] sd 9:0:0:0: [sde] Asking for cache data failed
[ 5.074142] sd 9:0:0:0: [sde] Assuming drive cache: write through
[ 5.080443] sd 10:0:0:0: [sdd] Assuming drive cache: write through
[ 5.083263] sd 10:0:0:0: [sdd] No Caching mode page present
[ 5.084450] sd 10:0:0:0: [sdd] Assuming drive cache: write through
[ 7.279275] EXT4-fs (sdb1): re-mounted. Opts: discard,commit=30
[ 7.348834] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: commit=30
[ 11.479936] sdc: sdc1
[ 11.482915] sd 8:0:0:0: [sdc] Asking for cache data failed
[ 11.483949] sd 8:0:0:0: [sdc] Assuming drive cache: write through
[ 11.485095] sd 8:0:0:0: [sdc] Attached SCSI disk
[ 12.598941] sdd: sdd1
[ 12.601511] sd 10:0:0:0: [sdd] No Caching mode page present
[ 12.602563] sd 10:0:0:0: [sdd] Assuming drive cache: write through
[ 12.603741] sd 10:0:0:0: [sdd] Attached SCSI disk
[ 19.239186] sde: sde1
[ 19.242084] sd 9:0:0:0: [sde] Test WP failed, assume Write Enabled
[ 19.248280] sd 9:0:0:0: [sde] Asking for cache data failed
[ 19.249315] sd 9:0:0:0: [sde] Assuming drive cache: write through
[ 19.250505] sd 9:0:0:0: [sde] Attached SCSI disk
My fstab, regarding these three disks, looks like this:
/dev/disk/by-id/scsi-SWD_10EAVS_ExternalWD-WCAU48911006-part1 /home/sxe/daten/daten_1TB ext3 defaults,noatime,users,exec 0 0
/dev/disk/by-id/scsi-SWD_Ext_HDD_1021_WCAZA1723679-part1 /home/sxe/daten/daten_2TB ext3 defaults,noatime,users,exec 0 0
/dev/disk/by-id/ata-WDC_WD5000KS-00MNB0_WD-WCANU2365992-part1 /home/sxe/daten/spiele_500MB ntfs-3g defaults,noatime,users,exec 0 0
As u can see, i use the disk id to mount the hdds because they are all external devices and i want to mount them always in the same place.
Maybe thats a problem?
Does anyone know, how to avoid these messages / warnings? They don't hurt but i would like to avoid them.
thx
-- Andy
Last edited by sxe (2011-12-16 10:21:35)

You cna usually silence the messages by adding 'quiet' on the kernel command line:
kernel /vmlinuz-linux root=/dev/disk/by-uuid/bf1d191b-0f0d-4961-bd67-4d023a2e5873 quiet ro
When pasting code, please use [ code ] tags https://bbs.archlinux.org/help.php#bbcode
like this
It makes the code more readable and more convenient to scroll through.

Similar Messages

[SOLVED] nouveau error while booting arch

Hi!!! I'm newbie to arch, here is an error I can't solve myself. I search in google for solutions but they didn't solved. Please help me to solve this. I dual booted arch linux with window 8.1. After installation, while booting for the first time, this error occurred.
Here is the error I found.
[0.063411] Ignoring BGRT: Invalid status 0 (expected 1)
starting version 218
Arch_Linux: clean, 70622/18677760 files, 1643393/74703025 blocks
[ 15.759913] nouveau E[ PIBUST][0000:01:00.0] HUBO: 0xffffffff (0x1a
[ 15.759952] nouveau E[ PIBUST][0000:01:00.0] GPCO: 0x00000001 (0x1a
[ 15.823494] nouveau E[ PBUS][0000:01:00.0] MMIO: 0x00000000 FAULT a
[ 15.824050] nouveau E[ DRM]Pointer to TMDS table invalid
[ 15.824072] nouveau E[ DRM]Pointer to flat panel table invalid}
Last edited by aaa234 (2015-02-04 04:18:42)

aaa234 wrote:
runical wrote:
That is a different problem to be honest. I assume that you can login using your normal user? If you set up sudo you might be able to get into root by using
sudo su
and change the password like that.
I'm sorry if this is a noob question. Where do I type sudo su because as soon as the OS is booted, the system asks localhost login and password. I haven't installed any desktop environment yet. I only set up a password under arch-chroot but I can't login with and without that password.
I was assuming a normal installed environment with a normal user. Using "sudo su", you can abuse privileges granted by sudo to circumvent the password required by su. A well configured sudo should not allow this, but in this case it seemed likely that the system was not completely set up yet.
problem has been solved with this https://bbs.archlinux.org/viewtopic.php?id=168879
Then, if there are no more problems, please mark the thread as solved.

[SOLVED]LUKS error while booting

This is more of an annoyance than a real problem; however it would be nice to know what is causing this. I have an unencrypted root (/dev/sda3) and two encrypted partitions. While booting I get the following message:
ERROR:Failed to open encryption mapping: The device /dev/sda3 is not a LUKS volume and the crypto= parameter was not specified.
However despite this the root is mounted correctly and the boot process follows normally. My two encrypted volumes also mount correctly. I checked my /etc/fstab and /boot/grub/grub.cfg and didn't see anything that might be giving it the idea that my root partition is encrypted. Am I missing something?
Thanks,
musashi.
Last edited by musashi (2012-06-13 15:19:59)

you probably have "encrypt" in your HOOKS array in /etc/mkinitcpio.conf .
remove it and rebuilt your initramfs with "mkinitcpio -p linux"

[SOLVED] strange messages while booting

Hi everyone.
Since upgrading open source video card driver (xf86-video-ati), I get the following messages while booting:
Fri Mar 30 10:26:25 2012: Found hardware: "HDA-Intel" "Realtek ALC272" "HDA:10ec0272,1179ff82,00100001" "0x1179" "0xff00"
Fri Mar 30 10:26:25 2012: Hardware is initialized using a generic method
Fri Mar 30 10:26:25 2012: Found hardware: "HDA-Intel" "ATI R6xx HDMI" "HDA:1002aa01,00aa0100,00100100" "0x1179" "0xff80"
Fri Mar 30 10:26:25 2012: Hardware is initialized using a generic method
What does they mean?
Last edited by digitalone (2012-03-31 12:04:34)

skottish wrote:It's in the ALSA section of the wiki. Just search for 'generic'.
Thanks, that helped me.

[Solved] Deprecated warnings while updating linux

Today while updating linux to its 3.6.10-1 version I got these warnings.
>>> Updating module dependencies. Please wait ...
>>> Generating initial ramdisk, using mkinitcpio. Please wait...
==> Building image from preset: 'default'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
==> Starting build: 3.6.10-1-ARCH
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [autodetect]
==> WARNING: Hook 'pata' is deprecated. Replace it with 'block' in your config
-> Running build hook: [block]
==> WARNING: Hook 'scsi' is deprecated. Replace it with 'block' in your config
-> Running build hook: [block]
==> WARNING: Hook 'sata' is deprecated. Replace it with 'block' in your config
-> Running build hook: [block]
-> Running build hook: [filesystems]
-> Running build hook: [usbinput]
-> Running build hook: [fsck]
==> Generating module dependencies
==> Creating gzip initcpio image: /boot/initramfs-linux.img
==> Image generation successful
==> Building image from preset: 'fallback'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
==> Starting build: 3.6.10-1-ARCH
-> Running build hook: [base]
-> Running build hook: [udev]
==> WARNING: Hook 'pata' is deprecated. Replace it with 'block' in your config
-> Running build hook: [block]
==> WARNING: Hook 'scsi' is deprecated. Replace it with 'block' in your config
-> Running build hook: [block]
==> WARNING: Hook 'sata' is deprecated. Replace it with 'block' in your config
-> Running build hook: [block]
-> Running build hook: [filesystems]
-> Running build hook: [usbinput]
-> Running build hook: [fsck]
==> Generating module dependencies
==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
==> Image generation successful
I'm already using only systemd . Where should I replace the hooks with block?
Last edited by tokoro (2012-12-15 19:28:16)

Into the Pit wrote:
Have a look at your
/etc/mkinitcpio.conf.pacnew
and merge those files.
Thanks, that solved it. Last time I ignored a deprecated warning, it came back to haunt me.

[SOLVED] Error while booting, related to nilfs2

I've just installed my fresh Arch and used nilfs2 inside vlm2 as my home partition. While booting, I'm getting these errors:
fsck: fsck.nilfs2: not found
fsck: error 2 while executing fsck.nilfs2 for /dev/mapper/TheVG-HomeLV
Other logical volumes are getting "clean" output while checked so it's not vlm-related; they are all ext4.
Partition is mounted and seems to work but I'm scared of just ignoring it and creating my user. ;-)
I have nilfs-utils installed. Is there any hook or module I need to add somewhere in order to use nilfs2 properly (like reiserfs hook)? There is nothing in the Wiki about this file system...
Edit: well, it appears that nilfs doesn't not come with check utility so I'm marking this as solved; sorry for garbage post...
Last edited by smsware (2013-03-16 22:07:55)

As there is no fsck utility and as it actually is planned to be created (I read that it's needed because the fs can easily crash on power loss; still, it can be recreated, as you stated) - there is a warning while building the kernel. I deleted fsck hook to not see it as my /var and root are sub-volumes of btrfs partition which doesn't need fsck as well. I made a service to umount, fsck and mount back the /boot (ext4) and uefi partitions... just to let you know what you can expect. But it's great anyway, snapshots are really easy to mount and use. I thought it has no wiki page because it's not popular (and probably for a reason) but now I believe it's because there is nothing to write about... it just works. ;-)
Last edited by smsware (2013-05-29 15:58:26)

HT1338 While booting macbook pro OSX lion 10.7.3 display blue screen for 3 seconds and booting,booting time is also very high. HOw to solve the proble

while booting macbook pro OSx version MAC OSX 10.7.3 display blue screen for some 5 second and continue the booting? such that booting time is high.How to resolve the problem.please guide me to solve that.I have tried NEW installation format installed 10.7.3 from online installation after that aslo im getting the ame problem.

Run through this list and get back with me
Step by Step to fix your Mac
Mac won't boot or "You need to restart"
Create a data recovery, undelete boot drive

Satellite M40-256 - error while booting via CD

Hello,
a well-known friend owns Satellite M40-256 which has Windows problem (error while updating/handling by her children).
She doesn't own an external Toshiba FDD or ODD. Also this portable has no built-in FDD. Buying one only for this issue? NO
The boot priority has been changed to: CD-network-HDD.
I've tried another non Toshiba branded ODD (in BIOS not mentioned/found)
The original ODD works/boots in another pc (via adapter) very great.
Ive tried several CD/DVDs to boot from (no error displayed): instant-Linux like knoppix, suse, other windows CDs, recovery CD, ... no success
Every time the same result: the laptop has a black screen, the ODD speeds up and after about 3 to 5 seconds windows starts with the black-white progress bar.
I also tried to press C to force booting from CD.
Some time ago, I had only access to windows in secured mode. But after uninstalling some updates it ends in a licence problem. This issue can be only solved by booting windows-cd via cd.
It has a Toshiba bios 1.00 (interesting, seems quite old).
I've trying at the moment to boot via network. Does the Toshiba show some messages about succeeding/failing at boot via network or CD?
Has setting the execution bit an influence on behaviour?
Does anybody know a solution booting windows?
Thanks in advance

Thanks for help.
I will look for an other ODD from Toshiba trying for boot.
Does the toshiba bios show messages about booting via cd or network? Even choosing network ends in a faulty Windows boot.
After choosing an item there's no message while booting
As I mentioned: the most interesting issue is ODD works/boots well via adapter in a normal pc and also after windows has been started (secured mode). But no boot possible.
I suspect meanwhile BIOS or Mainboard. But is there a chance for update in secured mode? (the only thing it starts is "secured with prompt"). Cats bites itself in tail.
BIOS also was saved with default setup. Nothing changed.
In event viewer I've found entry about probs with hard-drive and controller.
Does a destructive data processing influence the toshiba bios

Activating Swap "FAILED" while booting + Label swap problem

Hello everybody
I noticed when I was powering on my system that I had a red label "FAILED" next to 'Activating Swap'.
i looked at :
https://wiki.archlinux.org/index.php/Swap
https://wiki.archlinux.org/index.php/Pe … ice_naming
https://bbs.archlinux.org/viewtopic.php?id=103997
https://bbs.archlinux.org/viewtopic.php?id=122962
https://bbs.archlinux.org/viewtopic.php?id=132309
# swapon -s
Filename Type Size Used Priority
# free -m
total used free shared buffers cached
Mem: 2761 2642 118 0 124 1312
-/+ buffers/cache: 1206 1555
Swap: 0 0 0
# blkid
/dev/sda1: LABEL="boot" UUID="5C187AF40E0AEC1C" TYPE="ntfs"
/dev/sda5: LABEL="arch" UUID="74bb0a35-feac-468a-a58f-f842c7fd5340" TYPE="ext4"
/dev/sda9: LABEL="disk" UUID="0ACFB85358B278B7" TYPE="ntfs"
/dev/sda10: UUID="62c63c59-8dc0-4b84-8752-0801a0ae9657" TYPE="swap"
# cat /etc/fstab
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
tmpfs /tmp tmpfs nodev,nosuid 0 0
LABEL=arch / ext4 defaults 0 1
#LABEL=swap swap swap defaults 0 0
/dev/sda10 swap swap defaults 0 0
LABEL=disk /media/disk ntfs defaults 0 0
here i tried to label the /dev/sda10 : swap =>
http://linux.about.com/od/ptn_howto/a/hwtptn07t00.htm
# e2label /dev/sda10 swap
e2label: Bad magic number in super-block while trying to open /dev/sda10
Couldn't find valid filesystem superblock.
# tune2fs -L swap /dev/sda10
tune2fs 1.41.14 (22-Dec-2010)
tune2fs: Bad magic number in super-block while trying to open /dev/sda10
Couldn't find valid filesystem superblock.
# mke2fs swap /dev/sda10
mke2fs 1.41.14 (22-Dec-2010)
mke2fs: invalid blocks count '/dev/sda10' on device 'swap'
then i tried
# swapon /dev/sda10
# free -m
total used free shared buffers cached
Mem: 2761 2608 153 0 157 1290
-/+ buffers/cache: 1161 1600
Swap: 2998 0 2998
i dont understand why i got always "FAILED" next to 'Activating Swap' while booting.... !!
Last edited by hael (2012-01-01 11:18:07)

See in /var/log/boot if it's really "activating swap", not a neighbouring entry, that's failing (someone on the forum made this mistake; your post seems to indicate you're booting without swap indeed).
rc.sysinit (booting script) runs simply "swapon -a", so see if "swapoff -a; swapon -a" works. As the wiki says, you can use mkswap to set a label on swap - running mkswap might solve your problem anyhow, although "swapon /dev/sda10" wouldn't really work if the partition wasn't formatted as swap already.
Do you hibernate?

When I enable hyper-v the computer hang while booting

About 10 days before I refresh my system windows , now when I enable hyper-v to use windows phone 8 emulator the computer hang while booting and cannot go to desktop. I am using windows 8. Before refreshing windows everything was alright. Please can
you give any suggestion to solve the problem.

This should be posted to answers.microsoft.com.
Matt Small - Microsoft Escalation Engineer - Forum Moderator
If my reply answers your question, please mark this post as answered.
NOTE: If I ask for code, please provide something that I can drop directly into a project and run (including XAML), or an actual application project. I'm trying to help a lot of people, so I don't have time to figure out weird snippets with undefined
objects and unknown namespaces.

Little issues while booting (MBP 13"(2014), OS X 10.10.3)

Hi there,
Sometimes I am experiencing strange behaving of my MacBook Pro 13" (2014) while booting OS X (10.10.3)
1.) Pressing Power button --> Sound --> Black screen for some time (10-20s) --> Apple logo appears --> Normal logo screen*---> Then, everything is OK. ( it is happening now,after PRAM reset, because of problem n.2 which appeared some time ago. I tried to reset SMC, but it did not solve the problem)
2.) Pressing Power button --> Sound --> Black screen for some time (10-20s) --> Apple logo will not appear (just a black screen) --> I am forced to use shortcut to reset PRAM (happened to me only two times)
*sometimes will default login screen appear with U.S. keyboard, which is not my default, after entering login information interface looks strange (password box is out of his normal place) then,after few seconds (10s) it will change to normal login screen(with my wallpaper and keyboard setup),then after typing info everything is fine
Normally, I was used to it:
Pressing Power button --> Sound --> Apple logo appears immediately --> Normal logo screen ---> Then, everything is OK. (basically everything took shorter time, than now)
I did test with Apple Diagnostic tool, but My MacBook is without any issue or error.
So, where is the problem? Software? Should I reinstall my OS X?
Thanks for help in advance!
Glutamen

Thanks Oglethorpe,
I had found this solution and was coming back to post it but you were ahead of me.
For some reason the Yosemite update removed the startup drive.
All is well now.
Thanks again for your response.

My Black Berry Z10 is not starting- Stuck at logo while booting..

My mobile BBZ10 STL-100 is stuk at logo while booting. Its not completing the process to open/on the mobile.
Is there any way to fix this issue?
Can any of you help me, how to resolve this issue.
Thanks in Advance.

You can try loading the OS again, using
Upgrading OS10 devices using Autoloader
You will need to know the exact model STL100-x , found on the white sticker under your battery.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Error while booting maverick

error while booting maverick

The most likely causes of this error are:
1) Failing to execute tmloadcf after updating the UBBCONFIG file.
2) Failing to set TUXDIR correctly in the UBBCONFIG file.
3) Failing to set TUXCONFIG, PATH, or
LD_LIBRARY_PATH(Unix)/SHLIB_PATH(HP)/LIBPATH(AIX) correctly in your
enviroment.when executing tmboot or tlisten.
You should verify that your environment is set correctly and you should
execute tmunloadcf to see the contents of the configuration file that has
been loaded.
Ed
<Kaustubh Deoghare> wrote in message news:[email protected]..
Hello,
I am getting following error while booting tuxedo
exec TMS_ORACLE8I -A :
TMS_ORACLE8I: symbol lookup error: TMS_ORACLE8I: undefined symbol:
kgsmp789_compat_
CMDTUX_CAT:819: INFO: Process id=2568 Assume started (pipe).
Though I have installed Oracle9i, in ubbconfig it is still taking
TMS_ORACLE8I and hence trying to access Oracle8i library files.
Pl suggest in this regard
Thanx in advance

Getting BSOD error while booting

Hi,
I am getting BSOD error while booting using bootable pendrive.
Could you guys please provide the possible solution
Regards,
Chandan

Hello,
To troubleshoot the issue, you need review the dump file. We may find out the which file or driver is triggering a BSOD. And in most cases, BSOD is triggered by driver issue.
Are you doing OS deployment via bootable pendeivce? How do you created the boot image?
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Pcipsy error while booting

I have installed a PCI audio card and its driver. While booting
I am getting following error
pcipsy: WARNING: pcipsy0: ino 23 is invalid
pcipsy: WARNING: pcipsy0: ino 10 is invalid
Can any one tell me what is causing this pci error?
Thanks

The most likely causes of this error are:
1) Failing to execute tmloadcf after updating the UBBCONFIG file.
2) Failing to set TUXDIR correctly in the UBBCONFIG file.
3) Failing to set TUXCONFIG, PATH, or
LD_LIBRARY_PATH(Unix)/SHLIB_PATH(HP)/LIBPATH(AIX) correctly in your
enviroment.when executing tmboot or tlisten.
You should verify that your environment is set correctly and you should
execute tmunloadcf to see the contents of the configuration file that has
been loaded.
Ed
<Kaustubh Deoghare> wrote in message news:[email protected]..
Hello,
I am getting following error while booting tuxedo
exec TMS_ORACLE8I -A :
TMS_ORACLE8I: symbol lookup error: TMS_ORACLE8I: undefined symbol:
kgsmp789_compat_
CMDTUX_CAT:819: INFO: Process id=2568 Assume started (pipe).
Though I have installed Oracle9i, in ubbconfig it is still taking
TMS_ORACLE8I and hence trying to access Oracle8i library files.
Pl suggest in this regard
Thanx in advance

[SOLVED] HHD warnings while booting

Similar Messages

Maybe you are looking for