[SOLVED] I need some help fixing CUPS, it stoped working
hello i'm new here and have been trying to figure out what happended to cups. I installed Arch yesterday and after following the wiki, i had cups working and connected to my ubuntu server( where my printer is) i printed a test page and it was working. this morning cups is not working anymore, i had turn off my computer. the cupsd daemon is in my rc.conf file, but when i do
/etc/rc.d/cupsd restart i get the following:
/etc/rc.d/cupsd: line 6: /etc/rc.d/functions: No such file or directory
/etc/rc.d/cupsd: line 6: /etc/rc.d/functions: No such file or directory
/etc/rc.d/cupsd: line 38: stat_busy: command not found
/etc/rc.d/cupsd: line 44: stat_fail: command not found
/etc/rc.d/cupsd: line 6: /etc/rc.d/functions: No such file or directory
/etc/rc.d/cupsd: line 15: stat_busy: command not found
/etc/rc.d/cupsd: line 21: /usr/sbin/cupsd: Permission denied
/etc/rc.d/cupsd: line 24: stat_fail: command not found
i don't know how to fix it. when i go to http://localhost:631 i'm unable to connect.
this is my /etc/rc.conf :
# /etc/rc.conf - configuration file for initscripts
# Most of rc.conf has been replaced by various other configuration
# files. See archlinux(7) for details.
# For more details on rc.conf see rc.conf(5).
DAEMONS=(syslog-ng network crond sshd acpid dbus alsa cupsd)
# A reasonable DAEMONS array when using sysvinit is:
# DAEMONS=(syslog-ng network crond)
# When using systemd, it is recommended to only enable daemons that
# do not have native systemd service files.
# Storage
# USEDMRAID="no"
# USELVM="no"
# Network
interface=eth0
address=
netmask=
gateway=
# Modules
MODULES=(fglrx dbus pulseaudio equalizer microcode)
I can post anything you guys need me to post here, sorry if its not enough information, i'm still new to linux all together. thanks for the help.
Last edited by lazarojhr16 (2012-10-22 17:06:00)
bhrgunatha wrote:
lazarojhr16 wrote:
pulce wrote:
I see on the home page that new installation use systemd by default. Try
# systemctl start cupsd.service
Ok that worked. So this means I'm using systemd. Now my question would be how can i make it start on boot because i have the cups daemon (cupsd) on the rc.conf file. but it doesn't start on boot. Thanks for all the help.
To get it to start on boot run:
systemctl enable cupsd
or if that doesn't work
systemctl enable cups
For some reason on my system I have to use cups NOT cups**d**
thank you. After reading up on systemd I did systemctl enable cupsd and is not working, you saved the day, the second one works (using cups not cupsd)
Similar Messages
-
[SOLVED] Need some help getting the sound to work again
Recently I changed the motherboard and CPU to an AM3 platform, everything works with my previous setup except sound.
Reinstalling alsa-utils and rebooting had absolutely no effect. Google didn't help either.
lspci -v
00:05.0 Audio device: nVidia Corporation MCP61 High Definition Audio (rev a2)
Subsystem: ASUSTeK Computer Inc. Device 8415
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 11
Memory at dfff4000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel modules: snd-hda-intel
The motherboard documentation refers to it as "VIA VTI708S".
VLC complains about alsa-lib. Reinstalling it also didn't help.
aplay /usr/share/sounds/alsa/Front_Center.wav
ALSA lib confmisc.c:768:(parse_card) cannot find card '0'
ALSA lib conf.c:4154:(_snd_config_evaluate) function snd_func_card_driver returned error: No such file or directory
ALSA lib confmisc.c:392:(snd_func_concat) error evaluating strings
ALSA lib conf.c:4154:(_snd_config_evaluate) function snd_func_concat returned error: No such file or directory
ALSA lib confmisc.c:1251:(snd_func_refer) error evaluating name
ALSA lib conf.c:4154:(_snd_config_evaluate) function snd_func_refer returned error: No such file or directory
ALSA lib conf.c:4633:(snd_config_expand) Evaluate error: No such file or directory
ALSA lib pcm.c:2211:(snd_pcm_open_noupdate) Unknown PCM default
aplay: main:654: audio open error: No such file or directory
alsamixer
cannot open mixer: No such file or directory
Edit:
Damn ASUS font... It's "VIA VT1708S" (number one, not the letter "i") ! Duh. No wonder Google couldn't find any info.
Still, any ideas ? Or would you just rather let me squirm a little and diagnose the problem myself ?
Last edited by DSpider (2010-11-28 18:15:41)sudo modprobe snd-hda-intel
(I think it's what you tried to tell me, igndenok)
Great. It took the bulk of my day trying to figure out how to get this thing to work.
VolWheel is now set to adjust "Master Front" (it was previously set to "Master" with the old motherboard) and the Sonata volume bar apparently works too, just like I wanted (adjusting the PCM volume by default). Good. Great ! Now I just need to set the "snd-hda-intel" module to load at boot so I don't have to type "sudo modprobe snd-hda-intel" all the time and this thread can be considered SOLVED.
sudo nano /etc/rc.conf
...and add the following:
MODULES="... snd-hda-intel ..."
(also removed snd-ac97-codec from the list because that's what the old mobo used)
THANKS FOR ALL YOUR HELP !
PS: Just out of curiosity, why is it called "snd-hda-intel" ? Why intel ? The CPU is AMD, the chipset is Nvidia nForce, sound is VIA...
Anyone know ? I'll subscribe to this topic just in case anyone knows. Thanks again.
Last edited by DSpider (2010-11-28 18:16:36) -
My iPod Nano 5th gen is broken, and I need some help fixing it!
I have a iPod Nano 5th gen, and it is currently broken. When I play a song it usually pops up and at the bottom it shows the length of the song. Now when I play music it pops up and at the bottom it shows the volume control. I tried to switch it back by hitting the central circle button, but it immediately switched it back to volume control. Sometimes the menu button will work but now I usually have to hit the menu button a few times for it to work. I have run out of ideas so if anyone has some please share. Thanks!
You need to get it serviced. The click wheel is damaged.
-
I need some help, because JAVA don´t work in browser after update 7u51 for 64bits.
... I don´t get more some sites that need to use JAVA to work.
I tried several options, but I didn´t get!!!
Java after update, it doesn´t want to work, the browser (Chrome, Firefox, Safari and Exporer) don´t get to find update and I don´t understand what i have to do.
ps.; so sorry if my english isn´t good, but I tried. ...
Thanks!
AndryeaA probable quick fix is available via the "Exception Site List" instructions here - Java™ SE Development Kit 7 Update 51 Release Notes
Long term, however, this is a security risk and recommended security policies should be adhered to
HTH
Srini -
Need some help getting my G5 "SCSI" compatible
Aloha:
I need some help getting my G5 to work with my SCSI scanner.
It has been suggested that I use an Adaptec PowerDomain 29160N to connect my Lacie SilverScanner III scanner, which is SCSI.
http://www.adaptec.com/en-US/products/mac/scsi/APD-29160N/
Does anyone have any experience with this unit or another SCSI adaptor that may be of help.
I have a G5 using OS 10.4.8
Any help would sure be of use!
Thanks
Dan Page
Maui, HawaiiDan Page-
I've not used this card, but a quick scan of the web page says that it is compatible with Mac OSX 10.3.X. You may want to contact them to verify that it will work with your system.
Luck-
-DaddyPaycheck -
I am currently using an ipod touch 3. When i record in voice memos with the apple earphones(with an inbuilt mic) i can see on the screen that its recording;
but when i hear it, its just a long beep. Need some help!Does the mic work for other apps like Voice Control?
Does the mic work OK in other devices?
Have you tried it with another mic?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
The backup disk image “/Volumes/Data/David Witkowski’s Mac Pro.sparsebundle” is already in use. Whenever Time Machine starts to backup to Time Capsuel I get the previous error message Where can I find this disk image?. I need some help to fix this.
Thanks,
David WThere are multiple answers and solutions if you look just to the right under the heading of More Like This.
-
my iPhone 3g has 2 white horizontal lines i don't know where did it came from. I turn it off then on but its still there. the lines spreads everyday. I dont know how to fix it. need some help guys.
If you take a screenshot (Press the home button and Lock button at the same time), does it appear on the screenshot? Zoom in on the screenshot and see if it's still there.
If not, then your display is failing. I would recommend taking it to an Apple Store if you can, if you can't then to an authorised Apple reseller.
If it does appear on the screenshot when you zoom into the spot, then it's a really weird software issue! You might have to backup and restore the device.
Let me know!
xeni -
i need some help! my i phone has switch off totally blank as if there is no baterry, i cant wsitch on anymore, i live in Africa whereby there is no any apple offises arroung, i want to find a solution thats why i am asking for the help
Plug in iPhone with Wall Charger for 10 minutes, it may turn on itself. If not, keep on Wall Charger and Reset, hold both Home and Power buttons until the iPhone begins to restart. This usually takes less than 20 seconds of holding both buttons.
-
I'm new to xcode and need some help.
i have written app and it easily launches etc.
but when i add background image to the ui app doesnt launch even though it says that there are no issues.
it highlights these lines in green and says:"thread 1 programm received signal:"SIGABRT"":
return NSApplicationMain(argc, (const char **) argv);I figured out how to solve our problem. I was using a Web View, and I had to add the Webkit.framework to my project to fix it.
I am not sure what framework if for images...sorry...
If you can find the framework, just add it to fix the problem...
Hope I helped!
Thanks,
Adam B -
Can't boot Lenovo Yoga 10+ HD, need some help ASAP!
Hi guys,
I am a bit clueless here. I just purchased the Yoga 10+ HD tablet and all was fine. Today I realised that my power button is constantly blinking (every 3 seconds). I cant boot the tablet the usual way by pressing the button. Clicking on it for more than 10 seconds won't change anything eiter. What is this and how can I get my tablet back to work?
PS: If I connect my tablet to my PC I get more than 12+ harddrives which can't be accessed and differ between 550kb up to 12gb.
I seriously need some help. I think its somehow in sleep mode or so. I don't know how to fix this.
thx for any solution.
Solved!
Go to Solution.Ok guys, got it. All fine. HAd to push button more than 30 secs. All fine now.
-
My airport problem has returned big time --Need some Help!!
Aloha once again:
I though that this was fixed by simply changing channels on my airport router, but that fix only lasted for a few days, but now it's back and even worse. Let me give you some background on this problem. Here's my original message concerning the problem:
I have my Airport Router connected to the Internet via DSLcable. I then tie my two computers into the internet via their airport cards. For about 6 months this system has been working just fine. Recently my desktop computer quit listening to the router and can no longer connect to the internet. It shows no signal strength and the name of the network on the Airport is not seen in the "connect to internet" panel. The same Airport works just fine on my LapTop and I am using it right now to get this message off to the internet.
I have fixed permissions, removed the airport card and cleaned the connector, the antenna plug and removed the system configuration folder from library preferences all to no avail!
This problem has been hounding me, intermittently, for over a year now What can I do to remedy this??? HELP!!!!
Dan Page
Maui, Hawaii
The suggestion to change channels, that came from this original request, worked but just for a very short time. Now I have to shut down my computer overnight to get connected and then it only lasts for several hours and the connection quits.
I thought maybe heat was a problem, but the last time it happened I opened the computer and played a large fan right on the card. This did not help. I shut it down for the night and it was fine the next morning for about 2 hours.
One new data point; if I turn off just the airport on my laptop computer overnight, that will fix the problem for a short time also.
Still need some help!!!
DanFirst, power off both the Time Capsule and AirPort Express.
Wait a few minutes, then power up the Time Capsule first, and let it run for a few minutes.
Temporarily, move the AirPort Express to the same room or close proximity to the AirPort Express and power it up.
If the Express powers up correctly, power it off again and move it approximately half the distance between the Time Capsule and the general area that needs more wireless coverage. Try to minimize obstructions like walls, ceiling, heavy furniture, etc as much as possible.
Please report on your results. -
Need some help with the Select query.
Need some help with the Select query.
I had created a Z table with the following fields :
ZADS :
MANDT
VKORG
ABGRU.
I had written a select query as below :
select single vkorg abgru from ZADS into it_rej.
IT_REJ is a Work area:
DATA : BEGIN OF IT_REJ,
VKORG TYPE VBAK-VKORG,
ABGRU TYPE VBAP-ABGRU,
END OF IT_REJ.
This is causing performance issue. They are asking me to include the where condition for this select query.
What should be my select query here?
Please suggest....
Any suggestion will be apprecaiated!
Regards,
DeveloperHello Everybody!
Thank you for all your response!
I had changes this work area into Internal table and changed the select query. PLease let me know if this causes any performance issues?
I had created a Z table with the following fields :
ZADS :
MANDT
VKORG
ABGRU.
I had written a select query as below :
I had removed the select single and insted of using the Structure it_rej, I had changed it into Internal table
select vkorg abgru from ZADS into it_rej.
Earlier :
IT_REJ is a Work area:
DATA : BEGIN OF IT_REJ,
VKORG TYPE VBAK-VKORG,
ABGRU TYPE VBAP-ABGRU,
END OF IT_REJ.
Now :
DATA : BEGIN OF IT_REJ occurs 0,
VKORG TYPE VBAK-VKORG,
ABGRU TYPE VBAP-ABGRU,
END OF IT_REJ.
I guess this will fix the issue correct?
PLease suggest!
Regards,
Developer. -
We have a set of oracle clients running on T5220 zones that need some help
Greetings all -
We have a set of oracle clients running on T5220 zones that need some help.
If, for example, I execute the query "select (all) from dba_objects", trace output reports 90% of the elapsed time spent under "SQLNet message from client".
Here are OS details for the clients: Solaris 10 5/08 s10s_u5wos_10 SPARC
Running "uname -a" from the client gives:
(SunOS bmc-ste-app 5.10 Generic_127127-11 sun4v sparc SUNW,SPARC-Enterprise-T5220)
Here are OS details for the dataserver: Enterprise Linux Enterprise Linux Server release 5.2
Running "uname -a" from the dataserver gives:
(2.6.18-92.1.6.0.2.el5 #1 SMP Thu Jun 26 17:44:55 EDT 2008 x86_64 x86_64 x86_64 GNU/Linux)
The RDBMS is 10.2.0.4
Again, please note, there is no application in the picture here. We are just running a simple catalog query (select * from dba_objects) from sqlplus. Why the wait on something like this? The wait also occurs when a different query is used (select (all) from SYS.COL$ where rownum < 50000). And it doesn't matter if I used the full client or the instant client. I still get the same high-wait.
We had thought - maybe this is a network thing - so we put a test client on the same subnet as the dataserver. This helped - but not enough. The wait is still way too high even with firewalls taken out of the equation.
We've also looked at arraysize, SDU, kernel settings. And we've spent time going over tkprof, truss and sqlnet-tracing.
Has anyone ever had to solve this HIGH WAIT ON CLIENT issue? Is there a work around or some tweak I'm missing.
Is anyone configured like we are (linux dataserver, solaris clients)? If so - did you see anything like this?
tia -
Jim
Edited by: jim1768 on Mar 31, 2010 1:47 PM
Edited by: jim1768 on Mar 31, 2010 2:12 PM
Edited by: jim1768 on Mar 31, 2010 2:13 PMHello,
We have the exact same issue. Did you ever solve this issue? We have a t5220 and have just upgraded our 11.5.10.2 11i system on it from 9.2.0.8 32-bit sparc to 11.2.0.1 64-bit sparc. Things should be faster but arent, and our consultant has tracked it down to high wait times when the apps tier using forms connects to the database tier on the same box. So even though the t5220 is both server and client, there is something about the client sql connection.through TNS that his having trouble. Thanks for any information. We've also created an S/R with Oracle.
Note: I am well aware of the other issues with the CMT server series but this particular issue seems independent of the regular / known issues and remains a mystery to us. Other known issues with the CMT servers for SPARC:
Metalink Note 781763.1 (Migration from fast single threaded CPU machine to CMT UltraSPARC T1 & T2)
http://blogs.sun.com/glennf/resource/Optimizing_Oracle_CMT_v1.pdf
http://blogs.sun.com/glennf/tags/throughput
http://blogs.sun.com/glennf/entry/getting_past_go_with_sparc
http://www.oracle.com/apps_benchmark/doc/E-Bus-11i-PAY_ORA_SUN-T5220.pdf (this paper has some oracle init settings at the end. The kernel settings have been included in the OS upgrade)
http://blogs.sun.com/mandalika/entry/siebel_on_sun_cmt_hardware -
Error in internet recovery need some Help.
Hello i need some help with this kind of error on my Macbook pro upon recovering in the internet using wifi..
[URL=http://s617.photobucket.com/user/jrockers_143/media/IMG_0101_zps679fa98a.jpg.htm l][IMG]http://i617.photobucket.com/albums/tt254/jrockers_143/IMG_0101_zps679fa98a.jpg[/IMG][/URL]
does anybody knows how to solve this..Never mind, after a lot of searching adn BS, finally found a tutorial on Youtube on how to get apps without a credit card.
Apple, make your system easier for people out of their country, and people without a credit card.
Maybe you are looking for
-
[JS CS3] Can a dropdown list be made editable?
Hello, I would like to have a dropdown list that is editable. The list I have is a list of existing xml tags. I have a script that creates new xml tags and I would like to include the now existing tag names and the ability to create new names. If a d
-
Creating a Win7 OS install disc via recovery tools?
Is there any way to clean install Win7 (that is, nothing but the OS) from the Lenovo recovery discs I made via the ThinkVantage tool, or is it limited to a full factory-fresh restore only? If that's the case, is it possible to create a Win7-only inst
-
HT204088 I have purchases on my iTunes account that are not mine. Where could this be coming from?
I keep getting charged for purchases that are not mine. I don't know where they are coming from and I checked my childrens accounts. Where could they be coming from?
-
I don't see the preview of my photo in iPhoto.
In Iphoto for one of my folder I dont see the previesw of my picture I see it only when I scroll down or up. Could you help me please.
-
E50 new firmware 06.41.3.0:features ?
Hello, Does anyone have the releases notes for the new firmware of the E50 ? what are the fixes ? what is new ? Nokia does not provide any infos on the software updater page, grrr, not serious... Thanks Benj