[SOLVED] incorrect navigation after migration 6i - 10g

Hi,
we have a big problem after forms migration from 6i to 10g. :-(
Our forms appliction contains a lot of forms with master detail data blocks in tabular layout. In most cases we have text fields inside the data blocks.
After migration we are not able to set the focus on any record by mouse. We are also unable to change the focus from one data block to another. The only way to set the focus is clicking on a check box (if there is one).
In 6i everything works: you can select records by mouse and you can focus another data block. (we tried migration by forms migration assistant and migration by forms builder with same results)
Any hints?
Thanks in advance, florian.
Message was edited by:
fschulze

problem solved!
applying patchset 3 (5983622) solved all navigation probs without programmig. just recompiled with 10.1.2.3 and everthing works as expected ;-))

Similar Messages

After Migrating from 10g to 11g Geeting problems with Guided navigations.

After Migrating from 10g to 11g Geeting problems with Guided navigations and section navigations not working.
And we are getting the following error <<odbc driver returned an error (SQLExecDirectW)>> where we have used navigations.
In 10G we have Guided navigation Reports to display the Reports links and intermediate reports for conditionally displaying the Dashboard section(Reports) but after migrating to 11g Guided navigation reports and conditional reports are not working..
We know that in 11g section navigation replaced with conditions and Guided navigation replaced with action link.. but
do we need to recreate those reports in actions and condition or is there any work around avoid reworking.

Hi Both,
Thanks for the reply ...
For Guided navigation we are getting like below error:
Odbc driver returned an error (SQLExecDirectW).
For Conditional dashboard section we are getting like below error:
"saw.aViewsToRefresh = [];saw.aViewsToRefresh['d:dashboard~p:1egt6il5utl0uu8n~s:3jsmgfs3c1r4tn7c~n:condition'] = true;saw.aViewsToRefresh['d:dashboard~p:1egt6il5utl0uu8n~s:nos5q43jvjmi643b~n:condition'] = true;"

NQS ERROR:14025 NO FACT TABLE EXISTS -after migrating from 10g to 11g

NQS ERROR:14025 NO FACT TABLE EXISTS AT THE REQUESTED LEVEL OF DETAIL in all the reports after migrating from 10g to 11g ...
then we applied the patch (One-off Patch for Bug: 11850704) for the error <<NQS ERROR:14025 NO FACT TABLE EXISTS AT THE REQUESTED LEVEL OF DETAIL>>
But after applying the above the above patch we are still getting the same error.
but in the above patch instructions file - Post deployment instructions to create the Variable
Post Install Instructions:
- To revert to the 10g navigator behavior for handling conforming dimensions,
you must set the following session variable via an init block in the RPD:
NO_FORCE_TO_DETAIL_BIN=1
The default value for the above variable is 0.
- Restart all servers (Admin Server and all Managed Server(s))
but we didn’t find the process to create the specified variable and Initialization block in the RPD
Can you please suggest us how to go further.
Our questions are:

Hi
Refer the below thread.
obiee 11g non-conforming dimensions and nQSError 14025
Might be help you/
Thanks,
satya

Can't see EJB objects in Application Navigator after migration

Hello
I can't see any objects in Application Navigator after migration from previous version of JDeveloper (9.2.0.5), in System Navigator view I can see all sources. Has somebody any idea what the reason is?
Tom

In the application navigator you should see one node per EJB, when you stand on it you'll see the various source files in the structure window.

Unable to parse WSDL of partnerlink after migrating from 10g to 11g

Hi,
My service is an Sync BPEL process calling a customised WSDL with the partnerlink. I migrated the working code of 10g to 11g. But compiling below is the error i am getting while trying to parse the WSDL of the partnerlink after migration.
==========================================
java.lang.RuntimeException: oracle.tip.tools.ide.pm.modules.sca.util.SCAException: SCA_COMPONENT_NAME_NOT_DEFINEDProcessInteraction_v1
     at oracle.tip.tools.ide.pm.modules.sca.ide.JDevScaProcessListener.modelChanged(JDevScaProcessListener.java:78)
     at oracle.tip.tools.ide.common.bpelparser.implementations.xmlef.ProcessImpl.fireModelChanged(ProcessImpl.java:130)
     at oracle.tip.tools.ide.pm.bpelgraph.editors.partnerlink.PartnerLinkEditPage.firePartnerLinkCreated(PartnerLinkEditPage.java:1426)
     at oracle.tip.tools.ide.pm.bpelgraph.editors.partnerlink.PartnerLinkEditPage.saveToModel(PartnerLinkEditPage.java:360)
     at oracle.tip.tools.ide.pm.bpelgraph.editors.partnerlink.PartnerLinkEditPage.saveChanges(PartnerLinkEditPage.java:224)
     at oracle.tip.tools.ide.pm.bpelgraph.views.nodeeditors.AbstractActivityNodeEditor$PanelManager.saveChanges(AbstractActivityNodeEditor.java:224)
     at oracle.tip.tools.ide.pm.bpelgraph.views.nodeeditors.ApplyCancelPanel.handleOK(ApplyCancelPanel.java:268)
     at oracle.tip.tools.ide.pm.bpelgraph.views.nodeeditors.ApplyCancelPanel.actionPerformed(ApplyCancelPanel.java:339)
     at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
     at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318)
     at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
     at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
     at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
     at java.awt.Component.processMouseEvent(Component.java:6263)
     at javax.swing.JComponent.processMouseEvent(JComponent.java:3267)
     at java.awt.Component.processEvent(Component.java:6028)
     at java.awt.Container.processEvent(Container.java:2041)
     at java.awt.Component.dispatchEventImpl(Component.java:4630)
     at java.awt.Container.dispatchEventImpl(Container.java:2099)
     at java.awt.Component.dispatchEvent(Component.java:4460)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4574)
     at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4238)
     at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4168)
     at java.awt.Container.dispatchEventImpl(Container.java:2085)
     at java.awt.Window.dispatchEventImpl(Window.java:2475)
     at java.awt.Component.dispatchEvent(Component.java:4460)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:599)
     at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
     at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
     at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:178)
     at java.awt.Dialog$1.run(Dialog.java:1045)
     at java.awt.Dialog$3.run(Dialog.java:1097)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.awt.Dialog.show(Dialog.java:1095)
     at java.awt.Component.show(Component.java:1563)
     at java.awt.Component.setVisible(Component.java:1515)
     at java.awt.Window.setVisible(Window.java:841)
     at java.awt.Dialog.setVisible(Dialog.java:985)
     at oracle.tip.tools.ide.common.graph.view.GraphPane.startEditing(GraphPane.java:1899)
     at oracle.tip.tools.ide.common.graph.view.GraphPane.startEditing(GraphPane.java:1830)
     at oracle.tip.tools.ide.common.graph.view.GraphPane.mousePressed(GraphPane.java:2186)
     at oracle.tip.tools.ide.pm.bpelgraph.views.BPELGraphPane.mousePressed(BPELGraphPane.java:2010)
     at java.awt.AWTEventMulticaster.mousePressed(AWTEventMulticaster.java:262)
     at java.awt.AWTEventMulticaster.mousePressed(AWTEventMulticaster.java:262)
     at java.awt.AWTEventMulticaster.mousePressed(AWTEventMulticaster.java:262)
     at java.awt.Component.processMouseEvent(Component.java:6260)
     at javax.swing.JComponent.processMouseEvent(JComponent.java:3267)
     at java.awt.Component.processEvent(Component.java:6028)
     at java.awt.Container.processEvent(Container.java:2041)
     at java.awt.Component.dispatchEventImpl(Component.java:4630)
     at java.awt.Container.dispatchEventImpl(Container.java:2099)
     at java.awt.Component.dispatchEvent(Component.java:4460)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4574)
     at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4235)
     at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4168)
     at java.awt.Container.dispatchEventImpl(Container.java:2085)
     at java.awt.Window.dispatchEventImpl(Window.java:2475)
     at java.awt.Component.dispatchEvent(Component.java:4460)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:599)
     at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
     at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
Caused by: oracle.tip.tools.ide.pm.modules.sca.util.SCAException: SCA_COMPONENT_NAME_NOT_DEFINEDProcessInteraction_v1
     at oracle.tip.tools.ide.pm.modules.sca.util.JDevSCAIntegrationUtil.validateNameDefined(JDevSCAIntegrationUtil.java:687)
     at oracle.tip.tools.ide.pm.modules.sca.util.JDevSCAIntegrationUtil.outboundParnerLinkCreated(JDevSCAIntegrationUtil.java:233)
     at oracle.tip.tools.ide.pm.modules.sca.ide.JDevScaProcessListener.createOutboundPartnerLink(JDevScaProcessListener.java:170)
     at oracle.tip.tools.ide.pm.modules.sca.ide.JDevScaProcessListener.modelChanged(JDevScaProcessListener.java:65)
     ... 64 more
======================================
Can someone help me out!
Thanks in advance:)

Were you able to resolve this Issue, can you please post the solution
글 수정: soauser

Problem with national fonts after migration 9i- 10g

I'm after migration from Developer Suite 9i to 10g. I see that all Polish characters are replaced with '?'. This problem is only in 10g Designer (before migration all were OK).
I've tried setting NATLNG to POLISH_POLAND.EE8MSWIN1250 in Forms Generator. In Windows registry is POLISH_POLAND.EE8MSWIN1250 (setting by DS10g setup).
I've tried fonts via Options->Color/Font/Style - I see change on Display view but '?' are still after saving changes and generating form.

Thanks knordstrand.
Problem's resolved yet. You're right - wrong charset on bd.
Close topic

Getting "ORA-01002: fetch out of sequence" after migrating into 10g

Hi All,
We are getting the mentioned error after migrating from "Oracle9i Enterprise Edition Release 9.2.0.8.0 - 64bit Production" to "Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit", when running a procedure.
Have anyone faced this problem before? I have searched a lot but the solution provided is to not to use commit inside loop. We are not using FOR UPDATE with cursors.
Any idea why the procedure running succesfuly in 9i is giving error in 10g.
PROCEDURE is very complicated and calling a lot of other procedures and functions.
Thanks in advance,
Jeneesh

Hi Boneist ,
Actually the code structure is like this. Loping through 140,000 records.
   declare
      cursor c1 .....;
begin
      massaging data;
      for rec in c1 loop
         do_processing .........
         if count is multiple of 5000 commit;
      end loop;
      other processses;
end;
Error is coming after the commit. But the same code is working fine in 9i.
Regards,
Jeneesh

Ofgtel65.pll , CGDV$REF_CODES.SOFT_VAL problem after migrating to 10g

Hi,
We have migrated from Oracle 9i to 10g and
In 'OAS904' , i have used CGDV$REF_CODES.SOFT_VAL to populate a field with a meaning via a dynamic list in one of the FORM and if I query the form by giving a value and press F12,all fields are populating , its working fine but the same thing is not working after migrating the FORMS application to 'OAS10.1.2'. If I query the form by giving a value and press F12,its showing error like "FRM:40201 Field must be entered" for that particular field because that field is not populated and also a required field in the form.
Actually , this form is generated by designer.If i open the form using forms builder, i can see the auto generated code like 'POST-QUERY', in that CGDV$REF_CODES.SOFT_VAL is used to retrieve the meaning.
Note : ofgtel65.pll points to QMS_REF_CODES instead of CG_REF_CODES.
Am using headstart6.5.4.0 .
The generated form having post_query with the following code
CGDV$REF_CODES.SOFT_VAL(P_VALUE=>curr_value, P_MEANING=>l_meaning, P_DOMAIN=>l_domain, P_VAL_CODE=>TRUE);
But in the ofgtel65.pll ,
the soft_val method will have a query that refers to QMS_REF_CODES .But my meanings are present in CG_REF_CODES.
Any help would be of great help. Thanks in advance.
Regards,
Tharini.
Edited by: tharini on Aug 4, 2010 10:30 PM

Is this a Designer generated Form ? You may want to ask the question on that Forum too.

DBMS_JOB after migrating to 10g

No jobs are running after migrating from 9i to 10g. Everything looks ok.
Creating new job for test- same story - no executions. I can execute them manually
Suggestions?

We run plenty of DBMS_JOB processes on 10g without any issue.
How, exactly, did you migrate from 9i to 10g?
If you migrated in place, the instructions will generally have you set JOB_QUEUE_PROCESSES to 0 during the migration. Did you forget to set it back after the migration finished?
Justin

Elapsed time went up from 1min to 22min after migrating from 10g to 11g

I just migrated one of my database from 10.2.0.2(Red hat Linux, 2 node RAC, sga= 1Gb) to 11.2.0.1 (red Hat Linux 2 Node RAC, SGA=7GB)
The timing for one of the specific query shoot up from 1min to 22 min.
Following is the query:
SELECT /*+ gather_plan_statistics */   docr.DRCONTENT
    FROM      WRPADMIN.T_DOCREPORT docr, WRPADMIN.t_document doc
           WHERE doc.docid = docr.docid
   AND 294325 = doc.rdocid
           AND ( ( ( (EXISTS
                         (SELECT   'X'
                            FROM   WRPADMIN.t_mastermap mstm1,
                                   WRPADMIN.t_docdimmap docdim1
                           WHERE       doc.docid = mstm1.docid
                                   AND mstm1.dimlvlid = 2
                                   AND mstm1.mstmapid = docdim1.mstmapid
                                   AND docdim1.dimid IN (86541))))
                  OR (EXISTS
                         (SELECT   'X'
                            FROM   WRPADMIN.t_mastermap mstm2,
                                   WRPADMIN.t_docdimmap docdim2
                           WHERE       doc.rdocid = mstm2.rdocid
                                   AND mstm2.dimlvlid = 1
                                   AND mstm2.mstmapid = docdim2.mstmapid
                                   AND docdim2.dimid IN (28388)))))
ORDER BY   doc.DOCIDThe select field (docr.DRCONTENT) is a CLOB column.
Following is the plan and statistics in 10g
Statistics
          1 recursive calls
          0 db block gets
     675018 consistent gets
      52225 physical reads
          0 redo size
   59486837 bytes sent via SQL*Net to client
   27199426 bytes received via SQL*Net from client
     103648 SQL*Net roundtrips to/from client
          1 sorts (memory)
          0 sorts (disk)
      51823 rows processed
SQL>
Plan hash value: 129748299
| Id | Operation                               | Name           | Starts | E-Rows | A-Rows |   A-Time   | Buffers | Reads | OMem | 1Mem | Used-Mem |
|   1 | SORT ORDER BY                          |                |      1 |     50 | 51823 |00:00:14.72 |     627K|   5379 |    26M| 1873K|   23M (0)|
|* 2 |   FILTER                                |                |      1 |        | 51823 |00:00:08.90 |     627K|   5379 |       |       |          |
|   3 |    TABLE ACCESS BY GLOBAL INDEX ROWID   | T_DOCREPORT    |      1 |      1 | 51823 |00:00:05.42 |     159K|   3773 |       |       |          |
|   4 |     NESTED LOOPS                        |                |      1 |     50 |    103K|00:00:12.65 |     156K|    628 |       |       |          |
|   5 |      TABLE ACCESS BY GLOBAL INDEX ROWID | T_DOCUMENT     |      1 |     50 | 51823 |00:00:00.15 |     481 |    481 |       |       |          |
|* 6 |       INDEX RANGE SCAN                  | RDOC2_INDEX    |      1 |    514 | 51823 |00:00:00.09 |     245 |    245 |       |       |          |
|* 7 |      INDEX RANGE SCAN                   | DOCID9_INDEX   | 51823 |      1 | 51823 |00:00:00.46 |     155K|    147 |       |       |          |
|* 8 |    TABLE ACCESS BY GLOBAL INDEX ROWID   | T_DOCDIMMAP    | 51823 |      1 |      0 |00:00:04.52 |     467K|   1140 |       |       |          |
|   9 |     NESTED LOOPS                        |                | 51823 |      1 |    207K|00:00:03.48 |     415K|    479 |       |       |          |
|* 10 |      TABLE ACCESS BY GLOBAL INDEX ROWID | T_MASTERMAP    | 51823 |      1 | 51823 |00:00:01.20 |     207K|    190 |       |       |          |
|* 11 |       INDEX RANGE SCAN                  | DOCID4_INDEX   | 51823 |      1 | 51824 |00:00:00.41 |     155K|    146 |       |       |          |
|* 12 |      INDEX RANGE SCAN                   | MSTMAPID_INDEX | 51823 |      1 |    103K|00:00:00.43 |     207K|    289 |       |       |          |
|* 13 |     TABLE ACCESS BY GLOBAL INDEX ROWID | T_DOCDIMMAP    |      1 |      1 |      1 |00:00:01.05 |     469 |    466 |       |       |          |
| 14 |      NESTED LOOPS                       |                |      1 |      1 |     15 |00:00:14.62 |     468 |    465 |       |       |          |
|* 15 |       TABLE ACCESS BY GLOBAL INDEX ROWID| T_MASTERMAP    |      1 |      1 |      1 |00:00:01.02 |     464 |    463 |       |       |          |
|* 16 |        INDEX RANGE SCAN                 | RDOCID3_INDEX |      1 |    629 | 44585 |00:00:00.29 |     198 |    198 |       |       |          |
|* 17 |       INDEX RANGE SCAN                  | MSTMAPID_INDEX |      1 |      1 |     14 |00:00:00.02 |       4 |      2 |       |       |          |
Predicate Information (identified by operation id):
   2 - filter(( IS NOT NULL OR IS NOT NULL))
   6 - access("DOC"."RDOCID"=294325)
   7 - access("DOC"."DOCID"="DOCR"."DOCID")
   8 - filter("DOCDIM1"."DIMID"=86541)
10 - filter("MSTM1"."DIMLVLID"=2)
11 - access("MSTM1"."DOCID"=:B1)
12 - access("MSTM1"."MSTMAPID"="DOCDIM1"."MSTMAPID")
13 - filter("DOCDIM2"."DIMID"=28388)
15 - filter("MSTM2"."DIMLVLID"=1)
16 - access("MSTM2"."RDOCID"=:B1)
17 - access("MSTM2"."MSTMAPID"="DOCDIM2"."MSTMAPID")following is the plan in 11g:
Statistics
         32 recursive calls
          0 db block gets
   20959179 consistent gets
     105948 physical reads
        348 redo size
   37320945 bytes sent via SQL*Net to client
   15110877 bytes received via SQL*Net from client
     103648 SQL*Net roundtrips to/from client
          3 sorts (memory)
          0 sorts (disk)
      51823 rows processed
SQL>
Plan hash value: 1013746825
| Id | Operation                               | Name           | Starts | E-Rows | A-Rows |   A-Time   | Buffers | Reads | OMem | 1Mem | Used-Mem |
|   0 | SELECT STATEMENT                        |                |      1 |        | 51823 |00:01:10.08 |      20M|   2306 |       |       |          |
|   1 | SORT ORDER BY                          |                |      1 |      1 | 51823 |00:01:10.08 |      20M|   2306 | 9266K| 1184K| 8236K (0)|
|* 2 |   FILTER                                |                |      1 |        | 51823 |00:21:41.79 |      20M|   2306 |       |       |          |
|   3 |    NESTED LOOPS                         |                |      1 |        | 51823 |00:00:01.95 |    8054 |   1156 |       |       |          |
|   4 |     NESTED LOOPS                        |                |      1 |    335 | 51823 |00:00:00.99 |    4970 |    563 |       |       |          |
|   5 |      TABLE ACCESS BY GLOBAL INDEX ROWID | T_DOCUMENT     |      1 |    335 | 51823 |00:00:00.38 |     402 |    401 |       |       |          |
|* 6 |       INDEX RANGE SCAN                  | RDOC2_INDEX    |      1 |    335 | 51823 |00:00:00.17 |     148 |    147 |       |       |          |
|* 7 |      INDEX RANGE SCAN                   | DOCID9_INDEX   | 51823 |      1 | 51823 |00:00:00.55 |    4568 |    162 |       |       |          |
|   8 |     TABLE ACCESS BY GLOBAL INDEX ROWID | T_DOCREPORT    | 51823 |      1 | 51823 |00:00:00.94 |    3084 |    593 |       |       |          |
|   9 |    CONCATENATION                        |                | 51823 |        | 51823 |00:22:16.08 |      20M|   1150 |       |       |          |
| 10 |     NESTED LOOPS                        |                | 51823 |        |      0 |00:00:02.71 |     221K|   1150 |       |       |          |
| 11 |      NESTED LOOPS                       |                | 51823 |      1 |    103K|00:00:01.19 |     169K|    480 |       |       |          |
|* 12 |       TABLE ACCESS BY GLOBAL INDEX ROWID| T_MASTERMAP    | 51823 |      1 | 51823 |00:00:00.72 |     108K|    163 |       |       |          |
|* 13 |        INDEX RANGE SCAN                 | DOCID4_INDEX   | 51823 |      1 | 51824 |00:00:00.52 |   56402 |    163 |       |       |          |
|* 14 |       INDEX RANGE SCAN                  | MSTMAPID_INDEX | 51823 |      2 |    103K|00:00:00.60 |   61061 |    317 |       |       |          |
|* 15 |      TABLE ACCESS BY GLOBAL INDEX ROWID | T_DOCDIMMAP    |    103K|      1 |      0 |00:00:01.14 |   52584 |    670 |       |       |          |
| 16 |     NESTED LOOPS                        |                | 51823 |        | 51823 |00:22:13.19 |      20M|      0 |       |       |          |
| 17 |      NESTED LOOPS                       |                | 51823 |      1 |    725K|00:22:12.31 |      20M|      0 |       |       |          |
|* 18 |       TABLE ACCESS BY GLOBAL INDEX ROWID| T_MASTERMAP    | 51823 |      1 | 51823 |00:22:11.09 |      20M|      0 |       |       |          |
|* 19 |        INDEX RANGE SCAN                 | RDOCID3_INDEX | 51823 |    336 |   2310M|00:12:08.04 |    6477K|      0 |       |       |          |
|* 20 |       INDEX RANGE SCAN                  | MSTMAPID_INDEX | 51823 |      2 |    725K|00:00:00.83 |   51838 |      0 |       |       |          |
|* 21 |      TABLE ACCESS BY GLOBAL INDEX ROWID | T_DOCDIMMAP    |    725K|      1 | 51823 |00:00:00.92 |   51823 |      0 |       |       |          |
Predicate Information (identified by operation id):
   2 - filter( IS NOT NULL)
   6 - access("DOC"."RDOCID"=294325)
   7 - access("DOC"."DOCID"="DOCR"."DOCID")
12 - filter("MSTM1"."DIMLVLID"=2)
13 - access("MSTM1"."DOCID"=:B1)
14 - access("MSTM1"."MSTMAPID"="DOCDIM1"."MSTMAPID")
15 - filter((INTERNAL_FUNCTION("DOCDIM1"."DIMID") AND (("DOCDIM1"."DIMID"=86541 AND "MSTM1"."DIMLVLID"=2 AND "MSTM1"."DOCID"=:B1) OR
              ("DOCDIM1"."DIMID"=28388 AND "MSTM1"."DIMLVLID"=1 AND "MSTM1"."RDOCID"=:B2))))
18 - filter(("MSTM1"."DIMLVLID"=1 AND (LNNVL("MSTM1"."DOCID"=:B1) OR LNNVL("MSTM1"."DIMLVLID"=2))))
19 - access("MSTM1"."RDOCID"=:B1)
20 - access("MSTM1"."MSTMAPID"="DOCDIM1"."MSTMAPID")
21 - filter((INTERNAL_FUNCTION("DOCDIM1"."DIMID") AND (("DOCDIM1"."DIMID"=86541 AND "MSTM1"."DIMLVLID"=2 AND "MSTM1"."DOCID"=:B1) OR
              ("DOCDIM1"."DIMID"=28388 AND "MSTM1"."DIMLVLID"=1 AND "MSTM1"."RDOCID"=:B2))))Calling all performance experts. Any ideas ??
Edited by: dm_ptldba on Oct 8, 2012 7:50 AM

If you check lines 2, 3, 8, and 13 in the 10g plan you will see that Oracle has operated your two EXISTS subqueries separately (there is a bug with multiple filter subqueries in that version that indents each subquery after the first one extra place, so the shape of the plan is a little deceptive). The statistics show that the second subquery only ran once because existence was almost always satistfied by the first.
In the 11g plan, lines 2, 3, and 9 show that the optimizer has transformed your TWO subqueries into a single subquery, then turned transformed the single subquery into a concatenation and this has, in effect, made it execute both subqueries for every row from the driving table - all the extra work appears from the redundant execution of the thing that was the second EXISTS subquery.
If you extract the OUTLINE from the execution plans (add 'outline' to the call to dbms_xplan as one of the format options) you may see some hint that shows the optimizer combining the two subqueries - if so then put in the "NO_xxx" hint to block it. Alternatively you could simply try adding the hint stop ALL cost-based query transformations /*+ no_query_transformation */
Regards
Jonathan Lewis

Error ORA-24247 after migrating from 10g to 11g

Hi all,
After a migration from a 10.2.0.3 (32bits) database to a 11.2.0.3 (64bits) database, we are facing a problem related to the UTL_SMTP package. I vale already created a ACL, as you can see below:
-- create acl
BEGIN
    DBMS_NETWORK_ACL_ADMIN.CREATE_ACL (acl => 'user_processos.xml',
                                                                     description => 'abc',
                                                                principal => 'PROCES',
                                                                is_grant => TRUE,
                                                                privilege => 'connect');
END;
-- assign acl
BEGIN
    DBMS_NETWORK_ACL_ADMIN.ASSIGN_ACL (acl => 'user_processos.xml'
                                                                host => 'rac-abc',
                                                             lower_port => 1521,
                                                             upper_port => NULL);
          END;The problem is: After we try to execute a procedure that calls UTL_SMTP, with user PROCES the error ORA-24247 is raised. I did some research and they all point to the it is necessary to create an ACL to solve this probles, but the ACL already exists, as you can see above.

Hi,
I had the same issue, well multiple issues, with this at first. You should find the solution in one of these links. Make sure you have done each step in the lists and it will work.
[url http://www.ora00600.com/scripts/databaseconfig/ORA-29278.html]ORA-29278 SMTP
[url http://www.ora00600.com/scripts/11g/UTL_SMTP_ORA-06512.html]ORA-06512: at SYS.UTL_SMTP
There are various parameters and configuration steps you need to make sure you have performed for it to work.
Hopefully that helps,
Rob
Edited by: Rob_J on Feb 15, 2013 11:53 AM
*link was not working

Text field highlighting Issue in oracle forms 11g after migrating from 10g

We have migrated the oracle forms from 10g to 11g.
On 10g oracle form when I click on the text item then text item value gets hilighted in blue color but after converting same form(without making any code changes) into 11g version form when I click on then text item then value is NOT hilighted.
Could please help me why it's behaving different? Are there any configuration changes required at the application server side?
Thanks

christian,
We have forms 11.1.1.2.0.
In oracle forms “text item value is highlighted When user clicks on text item” is controlled by form level property “KEEP CURSOR POSITION”.
This property is not working with JAVA SUN plug-in in forms version 11.1.1.2.0.
This issue has been fixed under Patch Set 2 (11.1.1.3.0). Please see below meta link.
https://support.oracle.com:443/CSP/ui/flash.html#tab=KBHome(page=KBHome&id=()),(page=KBNavigator&id=(bmDocDsrc=KB&bmDocType=BULLETIN&bmDocID=1099499.1&from=BOOKMARK&bmDocTitle=Fixed%20Bugs%20List%20-%20Patch%20Set%202%20(11.1.1.3.0)%20for%20Oracle%20Fusion%20Middleware%2011g&viewingMode=1143))
Thanks,
Satish N

Query is taking long time to execute after migrating to 10g r2

Hi
We recently migrated the database from 9i to 10gr2 ((10.2.0.2.0).. This query was running in acceptable time before the upgrade in 9i.. Now it is taking a long long time to execute this... Can you please let me know what should i do to improve the performance now.. We are running stats everyday..
Thanks for your help,
Shree
======================================================================================
SELECT cr.cash_receipt_id
,cr.pay_from_customer
,cr.receipt_number
,cr.receipt_date
,cr.amount
,cust.account_number
,crh.gl_date
,cr.set_of_books_id
,sum(ra.amount_applied) amount_applied
FROM AR_CASH_RECEIPTS_ALL cr
,AR_RECEIVABLE_APPLICATIONS_ALL ra
,hz_cust_accounts cust
,AR_CASH_RECEIPT_HISTORY_ALL crh
,GL_PERIOD_STATUSES gps
,FND_APPLICATION app
WHERE cr.cash_receipt_id = ra.cash_receipt_id
AND ra.status = 'UNAPP'
AND cr.status <> 'REV'
AND cust.cust_account_id = cr.pay_from_customer
AND substr(cust.account_number,1,2) <> 'SI' -- Don't allocate Unapplied receipts FOR SI customers
AND crh.cash_receipt_id = cr.cash_receipt_id
AND app.application_id = gps.application_id
AND app.application_short_name = 'AR'
AND gps.period_name = 'May-07'
AND crh.gl_date <= gps.end_date
AND cr.receipt_number not like 'WH%'
-- AND cust.customer_number = '0000079260001'
GROUP BY cr.cash_receipt_id
,cr.pay_from_customer
,cr.receipt_number
,cr.receipt_date
,cr.amount
,cust.account_number
,crh.gl_date
,cr.set_of_books_id
HAVING sum(ra.amount_applied) > 0;
=========================================================================================
Here is the explain plan in 10g r2 (10.2.0.2.0)
PLAN_TABLE_OUTPUT
Plan hash value: 2617075047
| Id | Operation | Name | Rows | Bytes |TempSpc| Cost (%CPU)|
| 0 | SELECT STATEMENT | | 92340 | 10M| | 513K (1)|
|* 1 | FILTER | | | | | |
| 2 | HASH GROUP BY | | 92340 | 10M| 35M| 513K (1)|
| 3 | TABLE ACCESS BY INDEX ROWID | AR_RECEIVABLE_APPLICATIONS_ALL | 2 | 34 |
| 4 | NESTED LOOPS | | 184K| 21M| | 510K (1)|
|* 5 | HASH JOIN | | 99281 | 9M| 3296K| 176K (1)|
|* 6 | TABLE ACCESS FULL | HZ_CUST_ACCOUNTS | 112K| 1976K| | 22563 (1)|
|* 7 | HASH JOIN | | 412K| 33M| 25M| 151K (1)|
| 8 | TABLE ACCESS BY INDEX ROWID | AR_CASH_RECEIPT_HISTORY_ALL | 332K| 4546K|
| 9 | NESTED LOOPS | | 498K| 19M| | 26891 (1)|
| 10 | NESTED LOOPS | | 2 | 54 | | 4 (0)|
| 11 | TABLE ACCESS BY INDEX ROWID| FND_APPLICATION | 1 | 8 | | 1 (0)|
|* 12 | INDEX UNIQUE SCAN | FND_APPLICATION_U3 | 1 | | | 0 (0)|
| 13 | TABLE ACCESS BY INDEX ROWID| GL_PERIOD_STATUSES | 2 | 38 | | 3 (0)
|* 14 | INDEX RANGE SCAN | GL_PERIOD_STATUSES_U1 | 1 | | | 2 (0)|
|* 15 | INDEX RANGE SCAN | AR_CASH_RECEIPT_HISTORY_N2 | 332K| | | 1011 (1)
PLAN_TABLE_OUTPUT
|* 16 | TABLE ACCESS FULL | AR_CASH_RECEIPTS_ALL | 5492K| 235M| | 108K
|* 17 | INDEX RANGE SCAN | AR_RECEIVABLE_APPLICATIONS_N1 | 4 | | | 2
Predicate Information (identified by operation id):
1 - filter(SUM("RA"."AMOUNT_APPLIED")>0)
5 - access("CUST"."CUST_ACCOUNT_ID"="CR"."PAY_FROM_CUSTOMER")
6 - filter(SUBSTR("CUST"."ACCOUNT_NUMBER",1,2)<>'SI')
7 - access("CRH"."CASH_RECEIPT_ID"="CR"."CASH_RECEIPT_ID")
12 - access("APP"."APPLICATION_SHORT_NAME"='AR')
14 - access("APP"."APPLICATION_ID"="GPS"."APPLICATION_ID" AND "GPS"."PERIOD_NAME"='May-07')
filter("GPS"."PERIOD_NAME"='May-07')
15 - access("CRH"."GL_DATE"<="GPS"."END_DATE")
16 - filter("CR"."STATUS"<>'REV' AND "CR"."RECEIPT_NUMBER" NOT LIKE 'WH%')
17 - access("CR"."CASH_RECEIPT_ID"="RA"."CASH_RECEIPT_ID" AND "RA"."STATUS"='UNAPP')
filter("RA"."CASH_RECEIPT_ID" IS NOT NULL)
Here is the explain plan in 9i
Execution Plan
0 SELECT STATEMENT Optimizer=CHOOSE (Cost=445977 Card=78530 By
tes=9423600)
1 0 FILTER
2 1 SORT (GROUP BY) (Cost=445977 Card=78530 Bytes=9423600)
3 2 HASH JOIN (Cost=443717 Card=157060 Bytes=18847200)
4 3 HASH JOIN (Cost=99563 Card=94747 Bytes=9758941)
5 4 TABLE ACCESS (FULL) OF 'HZ_CUST_ACCOUNTS' (Cost=12
286 Card=110061 Bytes=1981098)
6 4 HASH JOIN (Cost=86232 Card=674761 Bytes=57354685)
7 6 TABLE ACCESS (BY INDEX ROWID) OF 'AR_CASH_RECEIP
T_HISTORY_ALL' (Cost=17532 Card=542304 Bytes=7592256)
8 7 NESTED LOOPS (Cost=17536 Card=809791 Bytes=332
01431)
9 8 NESTED LOOPS (Cost=4 Card=1 Bytes=27)
10 9 TABLE ACCESS (BY INDEX ROWID) OF 'FND_APPL
ICATION' (Cost=1 Card=1 Bytes=8)
11 10 INDEX (UNIQUE SCAN) OF 'FND_APPLICATION_
U3' (UNIQUE)
12 9 TABLE ACCESS (BY INDEX ROWID) OF 'GL_PERIO
D_STATUSES' (Cost=3 Card=1 Bytes=19)
13 12 INDEX (RANGE SCAN) OF 'GL_PERIOD_STATUSE
S_U1' (UNIQUE) (Cost=2 Card=1)
14 8 INDEX (RANGE SCAN) OF 'AR_CASH_RECEIPT_HISTO
RY_N2' (NON-UNIQUE) (Cost=1740 Card=542304)
15 6 TABLE ACCESS (FULL) OF 'AR_CASH_RECEIPTS_ALL' (C
ost=60412 Card=8969141 Bytes=394642204)
16 3 TABLE ACCESS (FULL) OF 'AR_RECEIVABLE_APPLICATIONS_A
LL' (Cost=337109 Card=15613237 Bytes=265425029)

Hi,
The plan between 9i and 10g is pretty the same but the amount of data fetched has considerably increased. I guess the query was performing slow even in 9i.
The AR_CASH_RECEIPT_HISTORY_ALL is presently having 332000 rows in 10g where as it was 17532 in 9i.
AR_CASH_RECEIPT_HISTORY_N2 is now having 332,000 rows in 10g where as in 9i it had 1,740
Try creating some indexes on
AR_CASH_RECEIPTS_ALL
hz_cust_accounts

Table getting clipped after migrating from 10g to 11g

Hi We migrated our application from 10g to 11g, our application got converted to a trinidad application, skin details are follows:
trinidad skins.xml:
<skins xmlns="http://myfaces.apache.org/trinidad/skin">
<skin>
<id>
suede.desktop
</id>
<family>
suede
</family>
<render-kit-id>
org.apache.myfaces.trinidad.desktop
</render-kit-id>
<style-sheet-name>
skins/suede/suede.css
</style-sheet-name>
</skin>
</skins>
Trinidad Config.xml:
<?xml version="1.0" encoding="windows-1252"?>
<trinidad-config xmlns="http://myfaces.apache.org/trinidad/config">
<skin-family>
suede
</skin-family>
</trinidad-config>
The problem is when the page loads, the table in the page is shown in a small box (please check the image: http://files.oraclecorp.com/content/AllPublic/Users/Users-J/jaya.battaramvenkatanaga-Public/anonymous/tableclipped.JPG), I am not sure if this is skin problem or layout problem. Please let me know if there is any correction in skin details given above, other wise if lay out is the problem, please provide any documents regarding trinidad layouts.
Edited by: user9976446 on Mar 1, 2011 5:11 AM
Edited by: user9976446 on Mar 1, 2011 5:19 AM
Edited by: user9976446 on Mar 1, 2011 5:20 AM

Hi Jaya,
I think it's a layout problem, the table component or the outer component around the table is set to some default width value (300px?). Try setting the width explicitly to something larger, or see if you can use a stretchable layout component around the table.
If you post the code from your page here we might be able to say more.
For reference:
Trinidad tag library http://myfaces.apache.org/trinidad/trinidad-api/tagdoc.html
A useful migration guide from 10g to Trinidad http://wiki.apache.org/myfaces/from_ADF_to_Trinidad

Calling Reports from forms after migrating to 10g

Hi all,
I have migrated forms to 10g. Now, few of those forms have a button_block where some buttons have a WHEN_BUTTON_PRESSED trigger, and in that they are calling the reports. Now I need to change it.
I have the following logic in it.
declare
     musername varchar2(20);
     mpassword     varchar2(20);
     mconnect      varchar2(20);
     mparameter varchar2(50);
     mcommand      varchar2(120);
     malert      number;
begin
          musername := Get_Application_Property(USERNAME);
          mpassword := Get_Application_Property(PASSWORD);
          mconnect := Get_Application_Property(CONNECT_STRING);
          mparameter:= 'mreceipt_no='||:global.receipt_no||' mreceipt_category_code='||:global.category_code;
          mcommand := 'r25run.exe module=report_name.rep userid='||musername||'/'||mpassword||'@'||mconnect||' '||rtrim(ltrim(mparameter));
          host(mcommand,NO_SCREEN);
exception
     when others then
          message('error');
end;No I need to change, the line
mcommand := 'r25run.exe module=report_name.rep userid='||musername||'/'||mpassword||'@'||mconnect||' '||rtrim(ltrim(mparameter));
How do I use run_report_object for this??

Hi
here is a complete example on how to call a report from a parameter form 10g
DECLARE
   PARAM_ID                                 PARAMLIST ;
   PARAM_NAME                           VARCHAR2(30) := 'REPORT_PARAMETER';
   ALRT                                         NUMBER;
   ERR_TXT                                   VARCHAR2(1000);
   repid                                         REPORT_OBJECT;
   v_rep                                        VARCHAR2(100);
   v_REP_SERVER_NAME       VARCHAR2(200);
   v_ip                                          VARCHAR2(100);
BEGIN
       PARAM_ID := GET_PARAMETER_LIST(PARAM_NAME);
       IF NOT ID_NULL(PARAM_ID) THEN
          DESTROY_PARAMETER_LIST('REPORT_PARAMETER');
       END IF;
       v_REP_SERVER_NAME := REP_SERVER_NAME;
BEGIN
        SELECT PARAMETER_VALUE -- this is the selection of the server ip stored into a tabel u could assign it into a variabel.
        INTO   v_ip
        FROM GENERAL_FIXED_PARAMETERS
       WHERE PARAMETER_ID = 'REPORT_SERVER_IP';
       EXCEPTION
       WHEN OTHERS THEN
       Message ('OTHERS' || SQLCODE || ' And ' || SQLERRM);
       Message ('OTHERS' || SQLCODE || ' And ' || SQLERRM);
END;
       PARAM_ID := CREATE_PARAMETER_LIST(PARAM_NAME);
       ADD_PARAMETER(PARAM_ID,'PARAMFORM',TEXT_PARAMETER,'NO');
       ADD_PARAMETER(PARAM_ID,'COPIES',TEXT_PARAMETER,:COPIES);
       ADD_PARAMETER(PARAM_ID,'P_DISPLAY',TEXT_PARAMETER,:DESTYPE);
       ADD_PARAMETER(PARAM_ID,'DESFORMAT',TEXT_PARAMETER,'pdf');
       ADD_PARAMETER(PARAM_ID,'group_id',TEXT_PARAMETER, :group_id);
         repid := find_report_object('WH_R01_GRP_ITEM');
         SET_REPORT_OBJECT_PROPERTY(repid,REPORT_SERVER,v_rep_server_name);
         v_rep := RUN_REPORT_OBJECT(repid,PARAM_ID);
WEB.SHOW_DOCUMENT('http://'||V_IP||'/reports/rwservlet/getjobid'||substr(v_rep,instr(v_rep,'_',-1)+1)||'?server='||v_REP_SERVER_NAME,'_blank');
END;
Hope this helps...
Regards,
Abdetu...

[SOLVED] incorrect navigation after migration 6i - 10g

Similar Messages

Maybe you are looking for