[Solved] Ipython Notebook Setup - zmq Dependency Issue
I'm posting both the problem and the solution here in case this helps anyone else who is working with IPython
I just ran into an issue trying to run the ipython notebook on a fresh install of Arch Linux. After installation Ipython works correctly from a shell/terminal prompt, but fails to start when you try to run it in notebook mode (via the' $ ipython notebook --pylab' command ).
This fails with an error that the incorrect version of pyzmq is installed - it's looking for version 2.1.4 (which apparently is not installed with the IPython install. FWIW I reinstalled ipython just to verify that I was not imagining things<g>)!. You can see some more info on this link:
http://ipython.org/ipython-doc/dev/inst … python-zmq
To reinstall/upgrade to the correct version use the following command:
$ sudo pip2 install ipython[zmq]
Notes: 1) This is the appropriate syntax to install subcomponents within a package (did not know this before as I normally install the entire pkg))
2) I use pip2 here as I have both py2.7 and 3.3 installed and I'm trying to develop with py 3.3.
3) AFAIK pip install is recommended over pacman for python components.
Hope this helps someone as it's frustrating trying to solve these install dependency issues - especially if the focus is on finishing some other task. Perhaps someone could confirm where this needs to be fixed as the problem is probably due to an upstream dependency.
ziv667 wrote:HOOKS="base udev autodetect modconf encrypt lvm2 block filesystems keyboard fsck"
Where's the keymap hook?
HOOKS="base udev autodetect modconf keymap encrypt lvm2 block filesystems keyboard fsck"
Similar Messages
-
Hi, I posted a more in detail thread about this on the UE4 forums.
https://answers.unrealengine.com/questions/84890/dependency-issues-with-running-ue4-demos.htmlHi,
Are you using a Gmail account on both Outlook PC client and on the phone? Is it an IMAP account?
Since you mentioned it also occurs to your phone, have you tried to logon the Gmail webmail to check the account status? If new emails sent to the account don't show up on the phone, it's not isolated to Outlook then, we need to contact the Gmail support
to get this issue addressed.
For the emails missing issue, I suggest you just open the .pst file instead of importing it. In Outlook 2013, go to FILE tab -> Open & Export -> Open Outlook Data File -> Browse to the .pst file and open it. It should then be displayed
in the account list on left. Check if the emails are still missing.
If you can confirm you included the emails in 2014 but they are still nowhere in sight, they may be filtered by the Outlook View. Run Outlook with the switch "/cleanviews" to check whether the emails are shown:
Press Win + R, type "outlook.exe /cleanviews" in the blank box, press Enter. Outlook will reset default view, all custom views will be lost.
Let me know if you have further questions.
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. -
[svn:fx-trunk] 12060: Fix dependency issues
Revision: 12060
Revision: 12060
Author: [email protected]
Date: 2009-11-20 12:12:21 -0800 (Fri, 20 Nov 2009)
Log Message:
Fix dependency issues
QE Notes: None
Doc Notes: None
Bugs: SDK-24353, SDK-24354
Reviewer: Corey
API Change: No
Is noteworthy for integration: No
tests: checkintests mustella/gumbo/components/DropDownList
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-24353
http://bugs.adobe.com/jira/browse/SDK-24354
Modified Paths:
flex/sdk/trunk/frameworks/projects/spark/src/spark/components/supportClasses/GroupBase.as
flex/sdk/trunk/frameworks/projects/spark/src/spark/components/supportClasses/SkinnableCom ponent.as
flex/sdk/trunk/frameworks/projects/spark/src/spark/utils/TextUtil.as
Added Paths:
flex/sdk/trunk/frameworks/projects/spark/src/spark/utils/FTETextUtil.as -
Why would Extension Manager CS6 report dependency issues for 29 InDesign CS6 factory plug-ins?
Suddenly Extension Manager CS6 is reporting dependency issues for 29 InDesign CS6 factory plug-ins. I made no changes to those plugins that might have precipitated this. Anyone have any ideas about what might have happened? (This is happening with Extension Manager 6.0.8.28 and InDesign 8.0.2.) Some examples of the plugins reported as not meeting dependency condition are the following:
Book Panel (8.0.0.370)
PDF (8.0.2.413)
Snippet (8.0.0.370)
XML (8.0.2.413)
XMLParser (8.0.0.370)
Hayden1. You only pasted one log file (log0.log?), there is another more important log file: ExtensionManager.log you dind't paste.
2. Have you removed ALL mxi files from ALL subfolders of BOTH "C:\ProgramData\Adobe\Extension Manager CS6\EM Store" AND "C:\Users\<UserName>\AppData\Roaming\Adobe\Extension Manager CS6\EM Store" to separate folder? If yes, Extension Manager shouldn't hang.
3. Please make sure you have "Full control" permission to ""C:\ProgramData\Adobe\Extension Manager CS6\Configuration\DB\ExMan.db" and "C:\Users\<UserName>\AppData\Roaming\Adobe\Extension Manager CS6\Configuration\DB\ExManUser.db". You can check it in "Security" tab page of "Properties" dialog box. -
Libgnome and bonono dependency issues
There is some kind of "unresolved dependency" issues in some packages. For example see https://bugs.archlinux.org/task/22547
This thread should help to fine the evils root. Until now it's seems to be a problem of libgnome, but may be we are wrong yet.
First of all, here is the output of 'pacman -Qe' from a system were terminator is running fine under gnome:
acl 2.2.49-2
acpi 1.5-1
alsa-utils 1.0.23-3
android-ndk r5-1
android-sdk r09-5
apache-ant 1.8.2-1
argouml 0.30.2-1
arj 3.10.22-5
attr 2.4.44-2
audacity 1.3.12-3
autoconf 2.68-1
automake 1.11.1-2
avant-window-navigator 0.4.0-10
bash 4.1.009-3
bash-completion 1.3-1
bin86 0.16.17-5
binutils 2.21-3
bison 2.4.3-1
brasero 2.32.1-1
bzip2 1.0.6-1
bzr 2.2.2-2
ccrypt 1.9-1
ccsm 0.8.4-2
cdrkit 1.1.11-1
cnetworkmanager 0.21.1-3
compiz-decorator-gtk 0.8.6-2
compiz-fusion-plugins-extra 0.8.6-1
compiz-fusion-plugins-main 0.8.6-1
conky 1.8.1-2
coreutils 8.10-1
cpio 2.11-2
cppcheck 1.46.1-1
cracklib 2.8.18-1
cryptsetup 1.2.0-1
cups 1.4.6-1
cups-pdf 2.5.0-1
cxxtest 3.10.1-4
dash 0.5.6.1-2
db 5.1.19-3
dbus 1.4.1-1
dbus-core 1.4.1-1
dcron 4.4-2
device-mapper 2.02.82-2
dhcpcd 5.2.10-1
dialog 1.1_20110118-1
diffutils 3.0-2
dosbox 0.74-1
dosfstools 3.0.10-1
driconf 0.9.1-5
e2fsprogs 1.41.14-1
easytag 2.1.6-3
eog 2.32.1-1
evince 2.32.0-7
faenza-icon-theme 0.8-1
fakeroot 1.14.5-1
fbxkb 0.6-1
figlet 2.2.3-1
file 5.05-1
filesystem 2010.12-1
findutils 4.4.2-3
flashplugin 10.2.152.27-1
flex 2.5.35-4
fuseiso 20070708-2
galculator 1.3.4-2
gamin 0.1.10-4
gartoon-redux-icon-theme 1.10-1
gawk 3.1.8-2
gcc 4.5.2-6
gcc-libs 4.5.2-6
gdb 7.2-2
gdbm 1.8.3-8
gdmap 0.8.1-2
gen-init-cpio 2.6.36-1
gettext 0.18.1.1-1
gimp 2.6.11-2
git 1.7.4-1
glibc 2.13-1
glproto 1.4.12-1
glsof 0.9.16-5
gnome-backgrounds 2.32.0-1
gnome-control-center 2.32.1-1
gnome-desktop 2.32.1-1
gnome-icon-theme 2.31.0-1
gnome-keyring 2.32.1-1
gnome-menus 2.30.5-1
gnome-mime-data 2.18.0-4
gnome-panel 2.32.1-2
gnome-power-manager 2.32.0-1
gnome-session 2.32.1-1
gnome-settings-daemon 2.32.1-2
gnome2-user-docs 2.32.0-1
graphviz 2.26.3-2
grep 2.7-1
groff 1.21-1
grsync 1.1.1-1
grub2 1.98-5
gstreamer0.10-base-plugins 0.10.32-2
gstreamer0.10-ffmpeg 0.10.11-1
gstreamer0.10-good 0.10.27-1
gtk-engines 2.20.2-1
gtk-theme-murrine-unity 0.7-1
gvfs-smb 1.6.6-1
gzip 1.4-2
hd2u 1.0.3-1
hdparm 9.36-1
htop 0.9-1
hunspell-de 20100727-1
hunspell-en 7.0-1
hunspell-ru 0.99g5-3
inetutils 1.8-2
initscripts 2010.07-2
iperf 2.0.5-1
iputils 20101006-1
jfsutils 1.1.14-2
jperf 2.0.2-2
kbd 1.15.2-1
kernel26 2.6.35.7-1
kernel26-docs 2.6.35.7-1
kernel26-headers 2.6.35.7-1
kernel26-manpages 2.6.35.7-1
ktsuss 1.4-2
laptop-mode-tools 1.55-2
less 436-2
libarchive 2.8.4-2
libdvdcss 1.2.10-2
libfetch 2.33-1
libgcrypt 1.4.6-1
libgpg-error 1.9-2
libpcap 1.1.1-2
libreoffice-de 3.3.0.4-1
libreoffice-ru 3.3.0.4-1
libsigsegv 2.6-1
libtool 2.4-2
libusb 1.0.8-1
libzip 0.9.3-1
licenses 2.6-1
linux-api-headers 2.6.37-1
linux-firmware 20110201-1
logrotate 3.7.9-1
lsdvd 0.16-4
lvm2 2.02.82-2
lxappearance 0.5.0-1
lxdm 0.3.0-1
lzo2 2.04-1
m4 1.4.15-1
mailx 8.1.1-7
make 3.81-5
man-db 2.5.9-1
man-pages 3.32-1
mc 4.7.4-1
mdadm 3.1.4-1
medit 1.0.0-1
meld 1.4.0-3
metacity 2.30.3-1
midori 0.3.0-1
mingw32-gcc 4.5.2-1
mingw32-w32api 3.15-1
mkinitcpio 0.6.8-1
mlocate 0.23.1-2
moc 2.4.4-3
module-init-tools 3.12-2
mp3unicode 1.2-4
namcap 2.7-1
nano 2.2.6-1
nautilus 2.32.2.1-1
ncdu 1.7-1
ncurses 5.7-4
net-tools 1.60-14
netbeans 6.9.1-1
netcfg 2.5.4-1
network-manager-applet 0.8.2-2
networkmanager 0.8.3-0.20110113
nitrogen 1.5.1-1
notification-daemon 0.4.0-4
ntfs-3g 2011.1.15-1
ogle 0.9.2-12
openal 1.12.854-2
openjdk6 6.b20_1.9.5-1
openldap 2.4.23-4
openntpd 3.9p1-13
openssh 5.8p1-1
ortp 0.16.3-1
p7zip 9.13-2
pacman 3.4.3-1
pacman-mirrorlist 20101223-1
pam 1.1.3-1
parcellite 0.9.3-1
patch 2.6.1-2
pciutils 3.1.7-3
pcmciautils 017-1
pcre 8.12-1
perl 5.12.3-1
pkg-config 0.25-3
pmtools 20101124-1
poppler 0.16.2-2
poppler-data 0.4.4-1
popt 1.16-3
powertop 1.13-2
preload 0.6.4-2
procinfo-ng 2.0.304-2
procps 3.2.8-3
psmisc 22.13-1
pwgen 2.06-2
pycrypto 2.3-1
python-dateutil 1.5-2
python-notify 0.1.1-8
python-rsvg 2.32.0-4
qt 4.7.1-3
readline 6.1.002-2
recordmydesktop 0.3.8.1-5
reiserfsprogs 3.6.21-3
samba 3.5.6-1
sdparm 1.06-1
sed 4.2.1-3
shadow 4.1.4.2-4
splix 2.0.0-7
sshfs 2.2-3
strace 4.5.20-1
streamripper 1.64.6-1
subversion 1.6.15-1
sudo 1.7.4.p6-1
sweethome3d 3.0-1
sysfsutils 2.1.0-5
syslog-ng 3.2.1-1
system-config-printer-gnome 1.2.6-1
sysvinit 2.88-2
tar 1.25-1
tcp_wrappers 7.6-12
tcpdump 4.1.1-1
terminator 0.95-2
testdisk 6.11.3-3
texinfo 4.13a-5
thunderbird-de 3.1.7-1
thunderbird-ru 3.1.7-1
transcode 1.1.5-5
transmission-gtk 2.13-1
ttf-dejavu 2.32-2
ttf-ms-fonts 2.0-7
twf-unofficial 0.4-1
tzdata 2010o-1
ubuntulooks 0.9.12-2
udev 165-1
unrar 4.0.6-1
unzip 6.0-5
upm 1.6-1
usbutils 001-2
util-linux-ng 2.18-4
valgrind 3.6.0-3
vi 050325-3
vim 7.3.102-1
vlc 1.1.7-2
vlc-plugin 1.1.7-2
volti 0.2.3-1
wget 1.12-2
which 2.20-4
wine 1.3.13-1
wings-bin 1.2-1
wireshark-gtk 1.4.3-1
worldofgoo 1.41-2
wpa_supplicant 0.7.3-1
wxformbuilder 3.1.70-1
xarchiver 0.5.2-1
xcursor-neutralplus 1.2-2
xf86-input-synaptics 1.3.0-2
xf86-video-intel 2.14.0-1
xfsprogs 3.1.4-1
xinetd 2.3.14-6
xmms2 0.7DrNo-8
xorg-server 1.9.4-1
xorg-xinit 1.3.0-2
xterm 267-1
yaourt 0.9.5.1-1
yelp 2.30.2-1
zim 0.49-1
zip 3.0-1.1
zlib 1.2.5-3In case anyone is interrested, here is the section of my pacman log during the "cleaning" that resulted in being able to use terminator without python2-bonobo.
[2011-02-08 12:03] Running 'pacman -Rs thunar-vfs'
[2011-02-08 12:03] Running 'pacman -Rs thunar-vfs squeeze'
[2011-02-08 12:03] removed squeeze (0.2.3-4)
[2011-02-08 12:04] removed thunar-vfs (1.2.0-2)
[2011-02-08 12:04] Running 'pacman -Rs hal'
[2011-02-08 12:04] Running 'pacman -Rs hal gnome-vfs'
[2011-02-08 12:04] Running 'pacman -Rs hal gnome-vfs libgnome'
[2011-02-08 12:04] Running 'pacman -Rs hal gnome-vfs python2-gnomevfs'
[2011-02-08 12:04] Running 'pacman -Rs hal gnome-vfs python2-gnomevfs python2-libgnome'
[2011-02-08 12:04] Running 'pacman -Rs hal gnome-vfs python2-gnomevfs python2-libgnome rhythmbox'
[2011-02-08 12:04] Running 'pacman -Rs hal gnome-vfs python2-gnomevfs python2-libgnome rhythmbox'
[2011-02-08 12:05] Running 'pacman -Rs hal gnome-vfs python2-gnomevfs python2-libgnome rhythmbox libgnome'
[2011-02-08 12:05] Running 'pacman -Rs hal gnome-vfs python2-gnomevfs python2-libgnome rhythmbox libgnome mysql-gui-tools libbonoboui'
[2011-02-08 12:05] Running 'pacman -Rs hal gnome-vfs python2-gnomevfs python2-libgnome rhythmbox libgnome libbonoboui libgnomeui'
[2011-02-08 12:07] Running 'pacman -Rs hal gnome-vfs python2-gnomevfs python2-libgnome rhythmbox libgnome libbonoboui libgnomeui gsynaptics mysql-gui-tools'
[2011-02-08 12:07] Running 'pacman -Rs hal gnome-vfs python2-gnomevfs python2-libgnome rhythmbox libgnome libbonoboui libgnomeui gsynaptics mysql-gui-tools baobab gnucash'
[2011-02-08 12:08] removed gnucash (2.2.9-10)
[2011-02-08 12:08] removed slib (3b3-1)
[2011-02-08 12:08] removed libofx (0.9.1-1)
[2011-02-08 12:08] removed opensp (1.5.2-1)
[2011-02-08 12:08] removed goffice (0.8.12-1)
[2011-02-08 12:08] Updating Font Cache
[2011-02-08 12:08] removed baobab (2.4.2-3)
[2011-02-08 12:08] removed mysql-gui-tools (5.0r14-4)
[2011-02-08 12:08] removed gtkhtml (3.32.1-1)
[2011-02-08 12:08] removed gsynaptics (0.9.16-1)
[2011-02-08 12:08] removed rhythmbox (0.13.3-1)
[2011-02-08 12:08] removed totem-plparser (2.32.2-1)
[2011-02-08 12:08] removed python2-gconf (2.28.1-7)
[2011-02-08 12:08] removed python-mako (0.3.4-4)
[2011-02-08 12:08] removed python-markupsafe (0.9.2-2)
[2011-02-08 12:08] removed python-beaker (1.5.4-2)
[2011-02-08 12:08] removed media-player-info (12-1)
[2011-02-08 12:08] removed libgpod (0.8.0-1)
[2011-02-08 12:08] removed mutagen (1.20-3)
[2011-02-08 12:08] removed libdmapsharing (2.1.8-1)
[2011-02-08 12:08] removed json-glib (0.12.2-1)
[2011-02-08 12:08] removed gvfs-afc (1.6.6-1)
[2011-02-08 12:08] removed libimobiledevice (1.0.4-1)
[2011-02-08 12:08] removed usbmuxd (1.0.6-2)
[2011-02-08 12:08] removed libplist (1.3-2)
[2011-02-08 12:08] removed python2-libgnome (2.28.1-7)
[2011-02-08 12:08] removed python2-bonobo (2.28.1-7)
[2011-02-08 12:08] removed pyorbit (2.24.0-3)
[2011-02-08 12:08] removed python2-gnomecanvas (2.28.1-7)
[2011-02-08 12:08] removed libgnomeui (2.24.4-1)
[2011-02-08 12:08] removed libbonoboui (2.24.4-1)
[2011-02-08 12:08] removed libgnomecanvas (2.30.3-1)
[2011-02-08 12:08] removed libgnome (2.32.0-3)
[2011-02-08 12:08] removed libgnome-data (2.32.0-3)
[2011-02-08 12:08] removed python2-gnomevfs (2.28.1-7)
[2011-02-08 12:08] removed libbonobo (2.32.0-1)
[2011-02-08 12:08] removed gnome-vfs (2.24.4-1)
[2011-02-08 12:08] removed hal (0.5.14-6)
[2011-02-08 12:08] removed hal-info (0.20091130-1)
[2011-02-08 12:08] removed dmidecode (2.11-1)
[2011-02-08 12:08] Running 'pacman -Rs hal'
[2011-02-08 12:09] Running 'pacman -S ha'
[2011-02-08 12:09] Running 'pacman -S hal'
[2011-02-08 12:09] installed hal-info (0.20091130-1)
[2011-02-08 12:09] installed dmidecode (2.11-1)
[2011-02-08 12:09] installed hal (0.5.14-6)
[2011-02-08 12:09] Running 'pacman -Rs hal'
[2011-02-08 12:09] removed hal (0.5.14-6)
[2011-02-08 12:09] removed hal-info (0.20091130-1)
[2011-02-08 12:09] removed dmidecode (2.11-1) -
How to release plugin(solve dependency issues)
I've developed a illustrator plugin dependent on Qt library, it runs well on the develop machine.
The libOliveLib.dylib is a shared library which developed by Qt.
Following are the dependencies of the plugin:
/System/Library/Frameworks/Cocoa.framework/Versions/A/Cocoa (compatibility version 1.0.0, current version 15.0.0)
@executable_path/../Frameworks/QtCore.framework/Versions/5/QtCore (compatibility version 5.4.0, current version 5.4.0)
@executable_path/../Frameworks/QtGui.framework/Versions/5/QtGui (compatibility version 5.4.0, current version 5.4.0)
@executable_path/../Frameworks/QtWidgets.framework/Versions/5/QtWidgets (compatibility version 5.4.0, current version 5.4.0)
@executable_path/../Frameworks/QtXml.framework/Versions/5/QtXml (compatibility version 5.4.0, current version 5.4.0)
@executable_path/../Frameworks/libOliveLib.dylib (compatibility version 0.0.0, current version 0.0.0)
/usr/lib/libstdc++.6.dylib (compatibility version 7.0.0, current version 7.9.0)
/usr/lib/libSystem.B.dylib (compatibility version 1.0.0, current version 125.2.0)
/System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation (compatibility version 150.0.0, current version 550.29.0)
/usr/lib/libobjc.A.dylib (compatibility version 1.0.0, current version 227.0.0)
And the dependencies of libOliveLib:
@executable_path/../Frameworks/libOliveLib.dylib (compatibility version 0.0.0, current version 0.0.0)
@executable_path/../Frameworks/QtWidgets.framework/Versions/5/QtWidgets (compatibility version 5.4.0, current version 5.4.0)
@executable_path/../Frameworks/QtGui.framework/Versions/5/QtGui (compatibility version 5.4.0, current version 5.4.0)
@executable_path/../Frameworks/QtCore.framework/Versions/5/QtCore (compatibility version 5.4.0, current version 5.4.0)
/System/Library/Frameworks/DiskArbitration.framework/Versions/A/DiskArbitration (compatibility version 1.0.0, current version 1.0.0)
/System/Library/Frameworks/IOKit.framework/Versions/A/IOKit (compatibility version 1.0.0, current version 275.0.0)
@executable_path/../Frameworks/QtXml.framework/Versions/5/QtXml (compatibility version 5.4.0, current version 5.4.0)
/System/Library/Frameworks/OpenGL.framework/Versions/A/OpenGL (compatibility version 1.0.0, current version 1.0.0)
/System/Library/Frameworks/AGL.framework/Versions/A/AGL (compatibility version 1.0.0, current version 1.0.0)
/usr/lib/libstdc++.6.dylib (compatibility version 7.0.0, current version 104.1.0)
/usr/lib/libSystem.B.dylib (compatibility version 1.0.0, current version 1213.0.0)
But when I deploy it to other machine, it crashed. I think it caused by dependency.
Any one has this issue before, could you please give me your suggestions or your solutions
Many hanks!Hi LeoTaro,
Thanks for your response!
This issue can be solved by adding qt.conf file to folder "/Applications/Adobe Illustrator CS6/Adobe Illustrator.app/Contents/Resources".
But this folder is Application resources folder or Adobe Illustrator, I think add qt.conf file to this folder doesn't make sense.
Is there any alternative ways?
I've also tried adding "QCoreApplication::addLibraryPath()" and "QCoreApplication::libraryPaths()", but it doesn't work.
Best Regards,
Jae Liu -
How to solve a PKGBUILD dependency issue for the MinGW-w64 toolchain?
Hi,
I had the ambitious plan of creating PKGBUILDs to provide a fully functional and full-featured MinGW-w64 toolchain in Arch (starting with the AUR). For those of you not aware of MinGW-w64; it's a project that provides the more complete alternative for MinGW.org: they support a much larger set of the Win32 API and provide 64-bit support. In short: they allow you to use GCC for Windows 32 and 64-bit.
The current list of packages is here: https://aur.archlinux.org/packages.php?SeB=m&K=rubenvb
They work (roughly, for me, I'm working out the problems as people report them), but only if you build and install them manually.
I would like to ask the help of the experts that reside here to resolve the issue that handy tools like yaourt and other AUR utilities cannot build/install these packages automagically, so that people are more easily persuaded to use my packages. The dependencies here are what functionally needs to be set, not per se what the current PKGBUILDs specify, due to numerous experiments and trial and error...)
The build and install order needs to be strictly followed:
1. build+install mingw-w64-headers-base (no makedepends)
2. build+install mingw-w64-binutils (no makedepends)
3. build+install mingw-w64-gcc-base (makedepends and depends: mingw-w64-binutils)
4. build+install mingw-w64-crt (makedepends and depends: mingw-w64-gcc-base and mingw-w64-binutils)
5. build mingw-w64-winpthreads (makedepends: mingw-w64-headers-base, mingw-w64-gcc-base and mingw-w64-binutils, conflicts mingw-w64-headers-base)
6. build mingw-w64-headers (no makedepends, conflicts mingw-w64-headers-base)
7. install mingw-w64-headers (replaces mingw-w64-headers-base)
8. install mingw-w64-winpthreads
9. build+install mingw-w64-gcc (replaces mingw-w64-gcc-base)
I tried to enforce this as much as possible in the PLGBUILDs, but am unsure if everything is as it should be...
The resulting binary packages that non-AUR-users
(once mingw-w64 is in a binary repo) should install:
- mingw-w64-headers
- mingw-w64-crt
- mingw-w64-winpthreads
- mingw-w64-binutils
- mingw-w64-gcc
The issue is that winpthreads overwrites two dummy headers that have to be included in mingw-w64-headers-base, so I provide a mingw-w64-headers package omitting these two files, but unusable without mingw-w64-winpthreads. So winpthreads needs to be built when mingw-w64-headers-base is installed, and mingw-w64-headers cannot be installed before winpthreads is installed, due to these two headers (per architecture) being supplied by winpthreads in a complete form.
I will try to tune the dependencies tonight, but any help or insight into the automation process is highly appreciated!
Thanks,
Ruben
Last edited by rubenvb (2011-11-22 21:28:12)Interesting problem.
While i don't use any aur helper, i think you can simplify your approach a bit.
Here's how i would do it (changes in red) :
1. build+install mingw-w64-headers-base (no makedepends)
this package DOES NOT include the dummy headers
1a. build + install mingw-w64-headers-extra-dummy (makedepends : mingw-w64-headers-base)
this package will include ONLY the dummy headers
2. build+install mingw-w64-binutils (no makedepends)
3. build+install mingw-w64-gcc-base (makedepends and depends: mingw-w64-binutils)
4. build+install mingw-w64-crt (makedepends and depends: mingw-w64-gcc-base and mingw-w64-binutils)
5. build mingw-w64-winpthreads
makedepends:
mingw-w64-headers-base, mingw-w64-gcc-base and mingw-w64-binutils, mingw-w64-headers-extra-dummy
conflicts with mingw-w64-headers-extra-dummy
provides mingw-w64-headers-extra
6. skipped
7. skipped
8. install mingw-w64-winpthreads
9. build+install mingw-w64-gcc (replaces mingw-w64-gcc-base)
makedepends : mingw-w64-headers-base, mingw-w64-headers-extra -
[Solved] Uninstalling vlc - dependency issues
pacman 4.2.0:
[root@arch ~]# pacman -Rs vlc
checking dependencies...
error: failed to prepare transaction (could not satisfy dependencies)
:: phonon-qt4-vlc: requires vlc
[root@arch ~]# pacman -Rs vlc phonon-qt4-vlc
checking dependencies...
error: failed to prepare transaction (could not satisfy dependencies)
:: phonon-qt4: requires phonon-qt4-backend
[root@arch ~]# pacman -Rs vlc phonon-qt4-vlc phonon-qt4
checking dependencies...
error: failed to prepare transaction (could not satisfy dependencies)
:: kdelibs: requires phonon-qt4
[root@arch ~]# pacman -Rs phonon-qt4-vlc
checking dependencies...
error: failed to prepare transaction (could not satisfy dependencies)
:: phonon-qt4: requires phonon-qt4-backend
[root@arch ~]# pacman -R phonon-qt4-vlc
checking dependencies...
error: failed to prepare transaction (could not satisfy dependencies)
:: phonon-qt4: requires phonon-qt4-backend
And I can't even
[root@arch ~]# pacman -R vlc
checking dependencies...
error: failed to prepare transaction (could not satisfy dependencies)
:: phonon-qt4-vlc: requires vlc
Last edited by nesk (2015-01-06 11:48:12)Lone_Wolf wrote:
nesk, phonon is a dependency of kdelibs, which is a depedency for many kde applications .
pactree -r kdelibs will give you an idea how many things on your system require kdelibs and thus phonon .
if you do have kdebase-workspace instaled, you can run KDE System Settings manually from terminal using systemsettings
OK, thanks, that did the trick:
[root@arch ~]# pactree -r kdelibs
kdelibs
├─libksane
└─libreoffice-still-kde4
[root@arch ~]# pacman -R libreoffice-still-kde4 libksane
checking dependencies...
Packages (2) libksane-4.14.3-1 libreoffice-still-kde4-4.2.8-2
Total Removed Size: 0.54 MiB
:: Do you want to remove these packages? [Y/n] y
(1/2) removing libksane [####################################################################################] 100%
(2/2) removing libreoffice-still-kde4 [####################################################################################] 100%
[root@arch ~]# pacman -R kdelibs
checking dependencies...
:: vlc optionally requires kdelibs: KDE Solid hardware integration
Packages (1) kdelibs-4.14.3-2
Total Removed Size: 50.35 MiB
:: Do you want to remove these packages? [Y/n] y
(1/1) removing kdelibs
[root@arch ~]# pacman -R vlc phonon-qt4-vlc
checking dependencies...
Packages (2) phonon-qt4-vlc-0.8.2-1 vlc-2.1.5-5
Total Removed Size: 43.71 MiB
:: Do you want to remove these packages? [Y/n] y
(1/2) removing phonon-qt4-vlc [####################################################################################] 100%
(2/2) removing vlc -
[solved] luks on lvm encryption keymap issue
hi,
i just installed arch on a new notebook of mine.
i used a luks encrypted lvm installation, which works (guided by the wiki)
but i am encoutering an issue with the keymap while decrypting at boot.
i've installed using "de-latin1-nodeadkeys" as keymap, and my actual passwort has some special characters.
at boot, i'v entered the passwort but it doesn't work.
so i rebootet with the live image and checked, with the german keymap again, which worked.
i checked for mispelling btw .
for testing purposes i set a password like "///" and it seems that the keymap at boot is an english one.
https://bugs.archlinux.org/task/36689 i found this bug, but it says closed so i'm thinking i went wrong somewhere.
any help is appreciated
here is my mkinitcpio.conf
# vim:set ft=sh
# MODULES
# The following modules are loaded before any boot hooks are
# run. Advanced users may wish to specify all system modules
# in this array. For instance:
# MODULES="piix ide_disk reiserfs"
MODULES=""
# BINARIES
# This setting includes any additional binaries a given user may
# wish into the CPIO image. This is run last, so it may be used to
# override the actual binaries included by a given hook
# BINARIES are dependency parsed, so you may safely ignore libraries
BINARIES=""
# FILES
# This setting is similar to BINARIES above, however, files are added
# as-is and are not parsed in any way. This is useful for config files.
FILES=""
# HOOKS
# This is the most important setting in this file. The HOOKS control the
# modules and scripts added to the image, and what happens at boot time.
# Order is important, and it is recommended that you do not change the
# order in which HOOKS are added. Run 'mkinitcpio -H <hook name>' for
# help on a given hook.
# 'base' is _required_ unless you know precisely what you are doing.
# 'udev' is _required_ in order to automatically load modules
# 'filesystems' is _required_ unless you specify your fs modules in MODULES
# Examples:
## This setup specifies all modules in the MODULES setting above.
## No raid, lvm2, or encrypted root is needed.
# HOOKS="base"
## This setup will autodetect all modules for your system and should
## work as a sane default
# HOOKS="base udev autodetect block filesystems"
## This setup will generate a 'full' image which supports most systems.
## No autodetection is done.
# HOOKS="base udev block filesystems"
## This setup assembles a pata mdadm array with an encrypted root FS.
## Note: See 'mkinitcpio -H mdadm' for more information on raid devices.
# HOOKS="base udev block mdadm encrypt filesystems"
## This setup loads an lvm2 volume group on a usb device.
# HOOKS="base udev block lvm2 filesystems"
## NOTE: If you have /usr on a separate partition, you MUST include the
# usr, fsck and shutdown hooks.
HOOKS="base udev autodetect modconf encrypt lvm2 block filesystems keyboard fsck"
# COMPRESSION
# Use this to compress the initramfs image. By default, gzip compression
# is used. Use 'cat' to create an uncompressed image.
#COMPRESSION="gzip"
#COMPRESSION="bzip2"
#COMPRESSION="lzma"
#COMPRESSION="xz"
#COMPRESSION="lzop"
# COMPRESSION_OPTIONS
# Additional options for the compressor
#COMPRESSION_OPTIONS=""
and my grub.cfg
# DO NOT EDIT THIS FILE
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
### BEGIN /etc/grub.d/00_header ###
insmod part_gpt
insmod part_msdos
if [ -s $prefix/grubenv ]; then
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
if loadfont unicode ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=en_US
insmod gettext
fi
terminal_input console
terminal_output gfxterm
set timeout=5
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Arch Linux, with Linux core repo kernel' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-core repo kernel-true-e084640b-9864-4667-84a4-9f5fb0a43483' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 802f1bee-db08-4896-87df-97c3883f58be
else
search --no-floppy --fs-uuid --set=root 802f1bee-db08-4896-87df-97c3883f58be
fi
echo 'Loading Linux core repo kernel ...'
linux /vmlinuz-linux root=/dev/mapper/main-root rw cryptdevice=/dev/sda2:main quiet
echo 'Loading initial ramdisk ...'
initrd /initramfs-linux.img
menuentry 'Arch Linux, with Linux core repo kernel (Fallback initramfs)' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-core repo kernel-fallback-e084640b-9864-4667-84a4-9f5fb0a43483' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 802f1bee-db08-4896-87df-97c3883f58be
else
search --no-floppy --fs-uuid --set=root 802f1bee-db08-4896-87df-97c3883f58be
fi
echo 'Loading Linux core repo kernel ...'
linux /vmlinuz-linux root=/dev/mapper/main-root rw cryptdevice=/dev/sda2:main quiet
echo 'Loading initial ramdisk ...'
initrd /initramfs-linux-fallback.img
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
### BEGIN /etc/grub.d/60_memtest86+ ###
### END /etc/grub.d/60_memtest86+ ###
and my default/grub
GRUB_DEFAULT=0
GRUB_TIMEOUT=5
GRUB_DISTRIBUTOR="Arch"
GRUB_CMDLINE_LINUX_DEFAULT="cryptdevice=/dev/sda2:main quiet"
GRUB_CMDLINE_LINUX=""
# Preload both GPT and MBR modules so that they are not missed
GRUB_PRELOAD_MODULES="part_gpt part_msdos"
# Uncomment to enable Hidden Menu, and optionally hide the timeout count
#GRUB_HIDDEN_TIMEOUT=5
#GRUB_HIDDEN_TIMEOUT_QUIET=true
# Uncomment to use basic console
GRUB_TERMINAL_INPUT=console
# Uncomment to disable graphical terminal
#GRUB_TERMINAL_OUTPUT=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
GRUB_GFXMODE=auto
# Uncomment to allow the kernel use the same resolution used by grub
GRUB_GFXPAYLOAD_LINUX=keep
# Uncomment if you want GRUB to pass to the Linux kernel the old parameter
# format "root=/dev/xxx" instead of "root=/dev/disk/by-uuid/xxx"
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
GRUB_DISABLE_RECOVERY=true
# Uncomment and set to the desired menu colors. Used by normal and wallpaper
# modes only. Entries specified as foreground/background.
#GRUB_COLOR_NORMAL="light-blue/black"
#GRUB_COLOR_HIGHLIGHT="light-cyan/blue"
# Uncomment one of them for the gfx desired, a image background or a gfxtheme
#GRUB_BACKGROUND="/path/to/wallpaper"
#GRUB_THEME="/path/to/gfxtheme"
# Uncomment to get a beep at GRUB start
#GRUB_INIT_TUNE="480 440 1"
#GRUB_SAVEDEFAULT="true"
vconsole.conf
KEYMAP="de-latin1-nodeadkeys"
Last edited by ziv667 (2013-11-27 12:18:03)ziv667 wrote:HOOKS="base udev autodetect modconf encrypt lvm2 block filesystems keyboard fsck"
Where's the keymap hook?
HOOKS="base udev autodetect modconf keymap encrypt lvm2 block filesystems keyboard fsck" -
Initial notebook setup freeze Microsoft account verification
Hi
Just bought a new notebook when going through the initial setup I put in a Microsoft username and password but I don't think I have one so now under setup it's still thinking 20 minutes later and I can't cancel it with a before button. The next button doesn't work. How can I start setup again any keys to try go back to start?
Big thanks AmandaHi @Mandymoo9 ,
Thank you for visiting the HP Support Forums and Welcome. I have read about your HP 14-D015TU Notebook and getting a blank or black screen on startup. Try performing a hard reset.
When performing a hard reset please note remove any and all USB devices. Disconnect all non-essential devices.
This should start things over again for you.
Hope this helps you out.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping! -
[SOLVED]systemd-tmpfiles-setup.service failure
Hi guys,
I just reinstalled arch with the following partitions:
[root@arch_vinnom vinnom]# gdisk -l /dev/sda
GPT fdisk (gdisk) version 1.0.0
Partition table scan:
MBR: protective
BSD: not present
APM: not present
GPT: present
Found valid GPT with protective MBR; using GPT.
Disk /dev/sda: 625142448 sectors, 298.1 GiB
Logical sector size: 512 bytes
Disk identifier (GUID): BD3CA679-FA08-4F60-9BAD-B845DE9FF7EB
Partition table holds up to 128 entries
First usable sector is 34, last usable sector is 625142414
Partitions will be aligned on 2048-sector boundaries
Total free space is 2014 sectors (1007.0 KiB)
Number Start (sector) End (sector) Size Code Name
1 2048 4095 1024.0 KiB EF02 BIOS
2 4096 52432895 25.0 GiB 8300 ROOT
3 52432896 53481471 512.0 MiB 8300 BOOT
4 53481472 74452991 10.0 GiB 8300 TMP
5 74452992 95424511 10.0 GiB 8300 VAR
6 95424512 602935295 242.0 GiB 8300 HOME
7 602935296 625142414 10.6 GiB 8200 SWAP
The problem is that tmpfs is mounted at '/tmp' through '/usr/lib/systemd/system/tmp.mount'
# This file is part of systemd.
# systemd is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2.1 of the License, or
# (at your option) any later version.
[Unit]
Description=Temporary Directory
Documentation=man:hier(7)
Documentation=http://www.freedesktop.org/wiki/Software/systemd/APIFileSystems
ConditionPathIsSymbolicLink=!/tmp
DefaultDependencies=no
Conflicts=umount.target
Before=local-fs.target umount.target
[Mount]
What=tmpfs
Where=/tmp
Type=tmpfs
Options=mode=1777,strictatime
Because of this, I'm always getting:
● systemd-tmpfiles-setup.service - Create Volatile Files and Directories
Loaded: loaded (/usr/lib/systemd/system/systemd-tmpfiles-setup.service; static; vendor preset: disabled)
Active: failed (Result: exit-code) since Dom 2015-05-03 03:29:58 BRT; 27min ago
Docs: man:tmpfiles.d(5)
man:systemd-tmpfiles(8)
Process: 278 ExecStart=/usr/bin/systemd-tmpfiles --create --remove --boot --exclude-prefix=/dev (code=exited, status=1/FAILURE)
Main PID: 278 (code=exited, status=1/FAILURE)
Then I tried to change '/tmp' to '/run/tmpfs', folder that I created for this, using tmpfs wiki as reference.
# This file is part of systemd.
# systemd is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2.1 of the License, or
# (at your option) any later version.
[Unit]
Description=Temporary Directory
Documentation=man:hier(7)
Documentation=http://www.freedesktop.org/wiki/Software/systemd/APIFileSystems
ConditionPathIsSymbolicLink=!/run/tmpfs
DefaultDependencies=no
Conflicts=umount.target
Before=local-fs.target umount.target
[Mount]
What=tmpfs
Where=/run/tmpfs
Type=tmpfs
Options=mode=1777,strictatime,nodev,nosuid,size=1536M
But the error persists. What I'm missing?
Last edited by vinnom (2015-05-03 16:51:38)ooo wrote:Couldn't you just mask the tmp.mount service? (as mentioned in the wiki page you linked)
Then your /tmp partition would be mounted according to your fstab
Raynman wrote:
The tmp.mount generated from your fstab should override the tmp.mount in /usr/lib/systemd/system. You say
The problem is that tmpfs is mounted at '/tmp' through '/usr/lib/systemd/system/tmp.mount'
If that is true (could you show output of mount and your fstab?) that is worth investigating.
However, your original problem seems to be that systemd-tmpfiles-setup.service fails. If something is wrong with your mounts, that could be related, but it might very well be something else. Is there any more information in the journal to indicate why the service fails (maybe even mentioning a tmpfiles.d config file that is responsible)? Did you create any config files for tmpfiles.d yourself?
Sorry guys, I tried to be concise, but ended up that I didn't make myself clear.
My '/tmp' is mounting fine as it takes priority over systemd. In fact, what I wanted to say is that '/tmp' mounts fine, systemd tried to mount tmpfs at '/tmp' and fails and I want to point tmpfs to mount at '/run/tmpfs' which I created for this, but just editing '/usr/lib/systemd/system/tmp.mount' didn't solve.
As for journalctl, it repeats several times this message:
Mai 02 22:43:32 arch_vinnom systemd[1]: systemd-tmpfiles-setup.service: main process exited, code=exited, status=1/FAILURE
Mai 02 22:43:32 arch_vinnom systemd[1]: Failed to start Create Volatile Files and Directories.
Mai 02 22:43:32 arch_vinnom systemd[1]: Unit systemd-tmpfiles-setup.service entered failed state.
Mai 02 22:43:32 arch_vinnom systemd[1]: systemd-tmpfiles-setup.service failed.
foutrelis wrote:
Depending on how your '/var' file system is created/mounted, you might need to enable ACL on it:
https://wiki.archlinux.org/index.php/Sy … rt_at_boot
hmm
I created my /var during arch installation, with mkfs.reiserfs.
Using
tune2fs -l /dev/sdXY | grep "Default mount options:"
To check if acl was already enabled, I got:
[root@arch_vinnom vinnom]# tune2fs -l /dev/sda5 | grep "Default mount options:"
tune2fs: Bad magic number in super-block while trying to open /dev/sda5
Couldn't find valid filesystem superblock.
Then I searched a bit and noted that reiserfs isn't compatible with acl =/
Last edited by vinnom (2015-05-03 15:12:18) -
HP Notebook 2000 cooling fan issue
Hey, everyone. I've had my HP Notebook 2000 for a few years and I've discovered my first major issue just a few days ago when the cooling fan stopped working. I don't really mind it too much because I have a USB-powered cooling fan that my laptop rests on, and it does a pretty good job. My entire laptop remains at about the same average tempurature.
The biggest issue I'm having is every few hours, the laptop will automatically shut off because of it.
As well, when I boot it up (turn it on), it gives me a reminder that the cooling fan isn't working and I will have to press "enter" or the laptop shuts off in 15 seconds.
How can I make it so the laptop ignores the broken cooling fan? I don't want to spend the money to repair it because I can rely on the USB-powered cooling device.
Thank you!
~Mark
This question was solved.
View Solution.No you can't. Reason it probably shuts down is because cpu temps peak over safety threshhold at times thus it shuts down to prevent damage.
Cooling systems on hp's are not the best when working so thermal stress on cpu,gpu & mainboard will be bad & failure failure will occur quite quickly.
Fan assembly is very cheap & can be done DIY if you have some skill in dismantling these sort of things & following hp service manual & other online guides.
I expect a new fan & new thermal paste & shimming along with cleaning would do wonders for running temps & long term health of the notebook.
Like my post? Click Kudos (thumb+) to show appreciation. -
[SOLVED]iPython 2.0.0 problem with pyzmq
Hello,
I have problem with running ipython 2. It complains about pyzmq version, but my version is 11 versions newer than they wants. Here is output of ipython qtconsole:
ipython qtconsole
Traceback (most recent call last):
File "/usr/lib/python3.4/site-packages/zmq/backend/__init__.py", line 42, in <module>
_ns = select_backend(second)
File "/usr/lib/python3.4/site-packages/zmq/backend/select.py", line 32, in select_backend
mod = __import__(name, fromlist=public_api)
File "/usr/lib/python3.4/site-packages/zmq/backend/cffi/__init__.py", line 12, in <module>
from zmq.backend.cffi import (constants, error, message, context, socket,
File "/usr/lib/python3.4/site-packages/zmq/backend/cffi/constants.py", line 4, in <module>
from ._cffi import C, c_constant_names
File "/usr/lib/python3.4/site-packages/zmq/backend/cffi/_cffi.py", line 20, in <module>
from cffi import FFI
ImportError: No module named 'cffi'
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.4/site-packages/IPython/utils/zmqrelated.py", line 35, in check_for_zmq
import zmq
File "/usr/lib/python3.4/site-packages/zmq/__init__.py", line 60, in <module>
from zmq.backend import *
File "/usr/lib/python3.4/site-packages/zmq/backend/__init__.py", line 45, in <module>
reraise(*exc_info)
File "/usr/lib/python3.4/site-packages/zmq/utils/sixcerpt.py", line 34, in reraise
raise value
File "/usr/lib/python3.4/site-packages/zmq/backend/__init__.py", line 38, in <module>
_ns = select_backend(first)
File "/usr/lib/python3.4/site-packages/zmq/backend/select.py", line 32, in select_backend
mod = __import__(name, fromlist=public_api)
File "/usr/lib/python3.4/site-packages/zmq/backend/cython/__init__.py", line 26, in <module>
from . import (constants, error, message, context,
ImportError: libsodium.so.4: cannot open shared object file: No such file or directory
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/bin/ipython", line 5, in <module>
start_ipython()
File "/usr/lib/python3.4/site-packages/IPython/__init__.py", line 118, in start_ipython
return launch_new_instance(argv=argv, **kwargs)
File "/usr/lib/python3.4/site-packages/IPython/config/application.py", line 562, in launch_instance
app.initialize(argv)
File "<string>", line 2, in initialize
File "/usr/lib/python3.4/site-packages/IPython/config/application.py", line 92, in catch_config_error
return method(app, *args, **kwargs)
File "/usr/lib/python3.4/site-packages/IPython/terminal/ipapp.py", line 321, in initialize
super(TerminalIPythonApp, self).initialize(argv)
File "<string>", line 2, in initialize
File "/usr/lib/python3.4/site-packages/IPython/config/application.py", line 92, in catch_config_error
return method(app, *args, **kwargs)
File "/usr/lib/python3.4/site-packages/IPython/core/application.py", line 381, in initialize
self.parse_command_line(argv)
File "/usr/lib/python3.4/site-packages/IPython/terminal/ipapp.py", line 316, in parse_command_line
return super(TerminalIPythonApp, self).parse_command_line(argv)
File "<string>", line 2, in parse_command_line
File "/usr/lib/python3.4/site-packages/IPython/config/application.py", line 92, in catch_config_error
return method(app, *args, **kwargs)
File "/usr/lib/python3.4/site-packages/IPython/config/application.py", line 474, in parse_command_line
return self.initialize_subcommand(subc, subargv)
File "<string>", line 2, in initialize_subcommand
File "/usr/lib/python3.4/site-packages/IPython/config/application.py", line 92, in catch_config_error
return method(app, *args, **kwargs)
File "/usr/lib/python3.4/site-packages/IPython/config/application.py", line 405, in initialize_subcommand
subapp = import_item(subapp)
File "/usr/lib/python3.4/site-packages/IPython/utils/importstring.py", line 42, in import_item
module = __import__(package, fromlist=[obj])
File "/usr/lib/python3.4/site-packages/IPython/qt/console/qtconsoleapp.py", line 67, in <module>
from IPython.qt.client import QtKernelClient
File "/usr/lib/python3.4/site-packages/IPython/qt/client.py", line 6, in <module>
from IPython.kernel.channels import (
File "/usr/lib/python3.4/site-packages/IPython/kernel/__init__.py", line 4, in <module>
from . import zmq
File "/usr/lib/python3.4/site-packages/IPython/kernel/zmq/__init__.py", line 14, in <module>
check_for_zmq('2.1.11', 'IPython.kernel.zmq')
File "/usr/lib/python3.4/site-packages/IPython/utils/zmqrelated.py", line 37, in check_for_zmq
raise ImportError("%s requires pyzmq >= %s"%(required_by, minimum_version))
ImportError: IPython.kernel.zmq requires pyzmq >= 2.1.11
and when I try to install python-cffi, I get same error:
ipython qtconsole
Traceback (most recent call last):
File "/usr/lib/python3.4/site-packages/cffi/vengine_cpy.py", line 135, in load_library
self.verifier.modulefilename)
ImportError: libsodium.so.4: cannot open shared object file: No such file or directory
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.4/site-packages/zmq/backend/cffi/_cffi.py", line 187, in <module>
_version_info = zmq_version_info()
File "/usr/lib/python3.4/site-packages/zmq/backend/cffi/_cffi.py", line 159, in zmq_version_info
runtime_library_dirs=cfg['runtime_library_dirs'],
File "/usr/lib/python3.4/site-packages/cffi/api.py", line 341, in verify
lib = self.verifier.load_library()
File "/usr/lib/python3.4/site-packages/cffi/verifier.py", line 75, in load_library
return self._load_library()
File "/usr/lib/python3.4/site-packages/cffi/verifier.py", line 151, in _load_library
return self._vengine.load_library()
File "/usr/lib/python3.4/site-packages/cffi/vengine_cpy.py", line 138, in load_library
raise ffiplatform.VerificationError(error)
cffi.ffiplatform.VerificationError: importing '/usr/lib/python3.4/site-packages/zmq/backend/cffi/__pycache__/_cffi__x7ad0c7d1xfbcd4439.cpython-34m.so': libsodium.so.4: cannot open shared object file: No such file or directory
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.4/site-packages/zmq/backend/__init__.py", line 42, in <module>
_ns = select_backend(second)
File "/usr/lib/python3.4/site-packages/zmq/backend/select.py", line 32, in select_backend
mod = __import__(name, fromlist=public_api)
File "/usr/lib/python3.4/site-packages/zmq/backend/cffi/__init__.py", line 12, in <module>
from zmq.backend.cffi import (constants, error, message, context, socket,
File "/usr/lib/python3.4/site-packages/zmq/backend/cffi/constants.py", line 4, in <module>
from ._cffi import C, c_constant_names
File "/usr/lib/python3.4/site-packages/zmq/backend/cffi/_cffi.py", line 190, in <module>
"Please check that you have zeromq headers and libraries." % e)
ImportError: PyZMQ CFFI backend couldn't find zeromq: importing '/usr/lib/python3.4/site-packages/zmq/backend/cffi/__pycache__/_cffi__x7ad0c7d1xfbcd4439.cpython-34m.so': libsodium.so.4: cannot open shared object file: No such file or directory
Please check that you have zeromq headers and libraries.
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.4/site-packages/IPython/utils/zmqrelated.py", line 35, in check_for_zmq
import zmq
File "/usr/lib/python3.4/site-packages/zmq/__init__.py", line 60, in <module>
from zmq.backend import *
File "/usr/lib/python3.4/site-packages/zmq/backend/__init__.py", line 45, in <module>
reraise(*exc_info)
File "/usr/lib/python3.4/site-packages/zmq/utils/sixcerpt.py", line 34, in reraise
raise value
File "/usr/lib/python3.4/site-packages/zmq/backend/__init__.py", line 38, in <module>
_ns = select_backend(first)
File "/usr/lib/python3.4/site-packages/zmq/backend/select.py", line 32, in select_backend
mod = __import__(name, fromlist=public_api)
File "/usr/lib/python3.4/site-packages/zmq/backend/cython/__init__.py", line 26, in <module>
from . import (constants, error, message, context,
ImportError: libsodium.so.4: cannot open shared object file: No such file or directory
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/bin/ipython", line 5, in <module>
start_ipython()
File "/usr/lib/python3.4/site-packages/IPython/__init__.py", line 118, in start_ipython
return launch_new_instance(argv=argv, **kwargs)
File "/usr/lib/python3.4/site-packages/IPython/config/application.py", line 562, in launch_instance
app.initialize(argv)
File "<string>", line 2, in initialize
File "/usr/lib/python3.4/site-packages/IPython/config/application.py", line 92, in catch_config_error
return method(app, *args, **kwargs)
File "/usr/lib/python3.4/site-packages/IPython/terminal/ipapp.py", line 321, in initialize
super(TerminalIPythonApp, self).initialize(argv)
File "<string>", line 2, in initialize
File "/usr/lib/python3.4/site-packages/IPython/config/application.py", line 92, in catch_config_error
return method(app, *args, **kwargs)
File "/usr/lib/python3.4/site-packages/IPython/core/application.py", line 381, in initialize
self.parse_command_line(argv)
File "/usr/lib/python3.4/site-packages/IPython/terminal/ipapp.py", line 316, in parse_command_line
return super(TerminalIPythonApp, self).parse_command_line(argv)
File "<string>", line 2, in parse_command_line
File "/usr/lib/python3.4/site-packages/IPython/config/application.py", line 92, in catch_config_error
return method(app, *args, **kwargs)
File "/usr/lib/python3.4/site-packages/IPython/config/application.py", line 474, in parse_command_line
return self.initialize_subcommand(subc, subargv)
File "<string>", line 2, in initialize_subcommand
File "/usr/lib/python3.4/site-packages/IPython/config/application.py", line 92, in catch_config_error
return method(app, *args, **kwargs)
File "/usr/lib/python3.4/site-packages/IPython/config/application.py", line 405, in initialize_subcommand
subapp = import_item(subapp)
File "/usr/lib/python3.4/site-packages/IPython/utils/importstring.py", line 42, in import_item
module = __import__(package, fromlist=[obj])
File "/usr/lib/python3.4/site-packages/IPython/qt/console/qtconsoleapp.py", line 67, in <module>
from IPython.qt.client import QtKernelClient
File "/usr/lib/python3.4/site-packages/IPython/qt/client.py", line 6, in <module>
from IPython.kernel.channels import (
File "/usr/lib/python3.4/site-packages/IPython/kernel/__init__.py", line 4, in <module>
from . import zmq
File "/usr/lib/python3.4/site-packages/IPython/kernel/zmq/__init__.py", line 14, in <module>
check_for_zmq('2.1.11', 'IPython.kernel.zmq')
File "/usr/lib/python3.4/site-packages/IPython/utils/zmqrelated.py", line 37, in check_for_zmq
raise ImportError("%s requires pyzmq >= %s"%(required_by, minimum_version))
ImportError: IPython.kernel.zmq requires pyzmq >= 2.1.11
version of my python-pyzmq is 14.3.0-1. It works on another computer with arch, when I do fresh install and it worked on this machine 3 days ago. Since then, nothing around python has changed in my computer (according to pacman.log).
Thank you
Last edited by Kotrfa (2014-05-14 13:16:35)Hello. I found a problem! This problem is caused by `libsodium 0.5.0.-1`. Downgrading package to 0.4.5-2 solve that.
You can do that by:
pacman -U /var/cache/pacman/pkg/libsodium-0.4.5-2-x86_64.pkg.tar.xz
and then add "libsodium" to /etc/pacman.conf IgnorePkg list.
Submitted here
Last edited by Kotrfa (2014-05-14 20:28:47) -
HP Pavilion g6 Notebook PC - Video playback issues
Hi,
The product I am using is HP Pavilion g6 Notebook PC and a Windows 8.1 operating system.
I am currently experiencing a problem with my laptop. Whenever I try and play a video no matter what website I am using one of two things happen. The video either buffers but does not play at all (no sound or video) for a minute or the video play for 7 second (with no sound) then freezes for about a minute and then plays the sound from the beginning and only starts playing the video when the sound catches up.
Note - when I try to play several vidoes as once they all start playing at the same time.
Your help would be greatly appreciated.A few things to try ChrisM95. The first thing to check is the volume mixer from desktop mode. Right click on your volume icon in the system tray, and 'open volume mixer'. When you go to a site and play a video, you may get a new slider for that site. Make sure it is not muted, and the slider is up.
Here is Googles troubleshooting list for YouTube: No sound on videos
Here is the general no sound document. Don't discount it right away, go through the steps to make sure it is configured correctly: No Sound from Speakers (Windows 8)
I am not certain if you have the Recovery Manager, but if you do you might be able to restore the original IDT Audio drivers using this method: Using Recovery Manager to Restore Software and Drivers (Windows 8)
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping! -
HP Pavilion dv7 Notebook PC graphics card issues
I have a HP Pavilion dv7 Notebook PC (Product number: QG704EA#B1A) with an AMD radeon HD 6700M graphics card. Most of my games crash, im always given a graphical error, i experience freezes, lagging and general overheating. This only happens when playing games.
I have done every update Intel, radeon and hp offers and nothing works including bios updates. All my research tells me its just a bad compatibility with the graphics card. Can that really be true? Have i wasted over a thousand euro on just bad hardware??
My warrenty expired already, i had no idea this could happen with a laptop.hi ,
welcome to HP support
your problem needs some effort to be solved
i can understand your setuation so i will help you
HW problems
>> you may have a cooling system problem check the cooling system
>> use cooling fan program to check the temps
SW problems
>> use a good OS version / i recommend Win 7 Enterprise x64
>> make sure you have no viruses / i recommend using NORMAN malware tool
>> make sure that the system partition (C) has a good free space
>> make sure you are using the latest drivers
>> make sure you have all the drivers available for you
>> VGA driver is very important use the one provided from HP drivers website not from any site even AMD.com
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the left to say “Thanks” for helping!
Mark Th. Antonio
Faculty Of Engineering Alexandria University
Maybe you are looking for
-
Design the New process set up for Materials in one physical stock serving p
Hi Experts, The requirement is one physical plant as two different logical plants in the system. The main issue is how to administrate or how to find the set up which allows one Physical warehouse in Hamburg which we have supplying two Logical wareho
-
Tried to upgrade my phone online using Loyalty Discount - Online sales Rep no help
I tried to upgrade my phone online to take advantage of the online discount and also use a loyalty discount. The price of the phone is correct until it I get to checkout, the loyalty discount is then removed and only the online discount is applied.
-
Good afternoon, MAC 00:0C:29:24:15:72 was entered from CWA through Device Registration by an AD user. Eventually, this MAC address appeared in the Endpoint database as "VMWare-Device" (which it is) and static assignment FALSE (because it was entered
-
The page isn't redirecting properly Firefox has detected that the server is redirecting the request for this address in a way that will never complete. This problem can sometimes be caused by disabling or refusing to accept c
-
AnyConnect SSL-client Certificate AND AAA RADIUS
Hi All, I'm trying to setup Anyconnect VPN Phone feature. I have the license, and I have been able to get the phone to authenticate / register etc with a username / password. I want to use the cert on the phone, use the CN as the username and just ve