[SOLVED]JDBC Dynamic credentials problem

Hello everyone. I have been trying to implement Steve Muench example 14 about JDBC Dynamic Credentials on my own web app., I am using Jdeveloper 10.1.3.2 and JSF/ADF.
The thing is that the JDBC dynamic credential works well but when I enter a non-existant username/password the login.jsp page sends me to the main.jsp page and in the table that I have placed there (in the main.jsp page) it shows "Access Denied". Is there any way to tell the app. to redirect the users to the login.jsp page if they try to acces other parts of the app. and they are not logged in???, or is it thay I am missing something from the Steve Muench's example???
I have been cheking the "DynamicJDBCBindingFilter.java" code and, if I understand correctly ('cause I consider myself a newbe), the "super.doFilter(request, response,chain)" is suppoused to throw an exception if the authentication fails and the "catch" code then sends the user to the login.jsp page... but for some reason this doesn't work!!!
Can anybody help me on this one please?
Thanks.
* By the way, no errors are thrown!
Message was edited by:
dragonov7

Hi Frank, thanks for your response. That same idea crossed my mind but the thing is that the line "super.doFilter(request, response,chain);" is supouseded to throw an exception if it fails to do its job but for some reason it does not... I have placed a "System.out.printline("XXX");" line inmediatly after the "catch" statement to see if an exception is thrown but apparently it doesn't, so I can't set a flag if I don't know for sure if the process ended well (or wrong).
I think I'll clear my mind for 1 hour and start all over again... maybe I am missing something...

Similar Messages

  • Jdbc dynamic credentials

    How does one go about implementing JDBC dynamic credentials as suggested by this article http://otn.oracle.com/products/jdev/howtos/bc4j/howto_dynamic_jdbc.html in UIX instead of JSP? Any pointers?
    Thanks!
    Ronny

    I should preface this with a warning that I'm not all that familiar with what you are trying to do. However, it should be possible to use very similar code to what is shown in the How To document for JSPs. In the JSP example, the code is inline part of the JSP. uiXML doesn't mix code and UI, so this code would therefore be located in a method event handler.
    The first thing to do would be to create a uiXML page with form fields for username and password. I would use a messageTextInput for these fields (with the secret attribute set to true for the password field). I would add a "Login" submitButton, and then add a ctrl:event="Login" attribute to the button so that it will fire a UIX Controller "Login" event.
    I would add a handler for the "Login" event in the handlers section of the uiXML page, and use a method event handler to call out to Java code. The method event handler has access to the HTTPSession and the submitted username and password, so you should be able to get the HTTPContainer and manipulate the session. The only major difference with the JSP example, would be that the JSP example uses the <jbo:ApplicationModule> tag in a try/catch block to attempt the connection, and you would need to use the regular BC4J Java APIs. If the connection was sucessful, your event hander would return an EventResult for the next paeg in your application, if there was an error you could return an event result for the same page displaying the error (as discussed in the Handling Errors chapter of the UIX Developer's Guide).
    Whenever discussing login procedures, it is worth pointing out the TrivialPageFlowEngine in the UIX Controller which is useful in enforcing that the user has gone through your login procedure prior to jumping to any page in the application.
    Hope this helps!

  • Problems JDBC Dynamic Credentials

    Considered:
    I am using Jdev 10.1.2 with ADF, and in the application that I use we have implemented the use of DynamicJDBCCredentials. The particularitity is that the work form is the following one, When initiating, the application must be connected with a user that is taken pre-defined from a file properties, this will show the screen of login, in which the user along with enters his data the selection of the company that wish, when doing this and to press ok, the application would have to change to the user and password of which appmod this connecting itself to the DB, the seteos of user/password takes control correctly, but appmodule does not change the connection and I do not understand because… somebody Will be able to help me with this? From already thank you very much.
    Estimados: Estoy usando Jdev 10.1.2 con ADF, y en la aplicacion que utilizo hemos implementado el uso de DynamicJDBCCredentials. La particularidad es que la forma de trabajo es la siguiente, Al iniciar, la aplicacion debe conectarse con un usuario que se toma pre-definido desde un archivo properties, esto mostrará la pantalla de login, en la cual el usuario ingresa sus datos junto con la seleccion de la empresa que desea, al hacer esto y presionar ok, la aplicacion debería cambiar el usuario y password con el cual el appmod se esta conectando a la DB, los seteos de user/password se hacen correctamente, pero el appmodule no cambia la conexion y no entiendo porque ... Podrá alguien ayudarme con esto? Desde ya muchas gracias.

    I should preface this with a warning that I'm not all that familiar with what you are trying to do. However, it should be possible to use very similar code to what is shown in the How To document for JSPs. In the JSP example, the code is inline part of the JSP. uiXML doesn't mix code and UI, so this code would therefore be located in a method event handler.
    The first thing to do would be to create a uiXML page with form fields for username and password. I would use a messageTextInput for these fields (with the secret attribute set to true for the password field). I would add a "Login" submitButton, and then add a ctrl:event="Login" attribute to the button so that it will fire a UIX Controller "Login" event.
    I would add a handler for the "Login" event in the handlers section of the uiXML page, and use a method event handler to call out to Java code. The method event handler has access to the HTTPSession and the submitted username and password, so you should be able to get the HTTPContainer and manipulate the session. The only major difference with the JSP example, would be that the JSP example uses the <jbo:ApplicationModule> tag in a try/catch block to attempt the connection, and you would need to use the regular BC4J Java APIs. If the connection was sucessful, your event hander would return an EventResult for the next paeg in your application, if there was an error you could return an event result for the same page displaying the error (as discussed in the Handling Errors chapter of the UIX Developer's Guide).
    Whenever discussing login procedures, it is worth pointing out the TrivialPageFlowEngine in the UIX Controller which is useful in enforcing that the user has gone through your login procedure prior to jumping to any page in the application.
    Hope this helps!

  • Solve this Dynamic sql problem

    hi i am sending the table and the contents in the table and what i want from the table.
    SQL> descr sswms_rule_components;
    Name Null? Type
    RULE_COMPONENT_ID NOT NULL NUMBER
    RULE_COMPONENT_CODE NOT NULL VARCHAR2(30)
    RULE_COMPONENT_NAME NOT NULL VARCHAR2(100)
    ENABLED_FLAG NOT NULL VARCHAR2(1)
    DB_TABLE VARCHAR2 (100)
    DB_COLUMN VARCHAR2 (100)
    DB_FUNCTION VARCHAR2(100)
    WHERE_CLAUSE VARCHAR2 (2000)
    FROM_CLAUSE VARCHAR2 (2000)
    The table contains the following data
    db_table
    sswms_shipment_lines
    wsh_carrier_ship_method --- the data inside the db_table column is a table
    db_column
    Ship to
    Carrier_id
    Where_clause
    Oe_order_headers_all.header_id = sswms_shipment_lines.order_header_id
    From_clause
    Oe_order_headers_all, sswms_shipment_lines -- the data inside the From_clause is a table
    Now my requirement is to build a dynamic sql in forms 6i.when I click the build sql it should update the sql
    So --- I have to write a procedure --
    Select db_table || . || db_column || ‘’ || group_key
    ---group_key is an alias
    From db_table, From_clause
    --- Here the logic should be
    1. I should remove the commas from the “FROM_CLAUSE” column and check for duplicate values
    2. i should check for duplicate values for the “DB_TABLE “ column
    3. I should compare both the FROM_CLAUSE and DB_TABLE column for DUPLICATE VALUES
    4. After doing this I should add the result to the “FROM” in the select statement
    5.The table name should not be repeated from the "FROM"
    I am expecting the code and a positive reply from you.

    I'm waiting for the code the last 10 minutes and none arrived. What's happening? Developers, do my work, please! (ironic sentence)

  • Solving corrupt dynamic memory problem

    Using LabWindows/CVI 2010, Windows XP. I have a data acquisition program that uses a rather large number of dynamically allocated arrays as buffers. The buffers are used to hold data from DAQmx and are passed and copied to a number of thread-safe queues and other routines. In certain circumstances, when I free one buffer I get a "dynamic memory is corrupt" error, which probably means - from reading the other posts on this topic on this forum - that some buffer was written past its end and corrupted the dynamic memory linked list. Is there any good way to determine exactly <i>which</i> buffer was corrupted? I don't believe that it was the one that I get the error on, it was probably the previous or next one in the chain. I can see the memory chain in the resource window, but I'm not sure how to interpret it.

    Hi pblase, 
    Here is an KnowledgeBase article that was written for LabWindows\CVI 6.0 but it still has some valid suggestions for debugging in LabWindows\CVI 2010:
    http://digital.ni.com/public.nsf/allkb/862567530005F09C8625632500692F41?OpenDocument
    There are three valid suggestions to debug from this article.  The only one that does not work still is the Run » Dynamic Memory feature.
    Peter T
    Applications Engineer
    National Instruments

  • JDBC Dynamic Credential with proxy users

    Hi
    We've developed an application with Business Components and it's been working very well. We're using JDBC Dynamic Credential like explain the document (How to Support JDBC Dynamic Credentials - http://www.oracle.com/technology/products/jdev/howtos/10g/dynamicjdbchowto.html). Now we want to use proxy users with JDBC Dynamic Credentials. How can we
    user proxy users with JDBC Credentials? What classes or parameters we need to change?
    I've been tested proxy users a lot, but in simple java classes, I don't know where to set some parameters in business components, for example, where can I set the following parameters?:
    OracleOCIConnectionPool.PROXY_USER_NAME
    OracleOCIConnectionPool.PROXYTYPE_USER_NAME
    Thanks in advance
    Liceth

    Hi Frank, thanks again
    Now we are using JDBC Credentials(like explain the paper http://www.oracle.com/technology/products/jdev/howtos/10g/dynamicjdbchowto.html), every user connects to the application with a diferent database user and password, then at database level the administrator can see diferents usernames (not the same user). Every application user correspond to a database user, relation one to one. The application works fine with that configuration. But, now for performance we want to change our application to use proxy users, I read that with proxy users redirectec to a single user, then the pooling connections are well reused, and at database level you have diferent usernames. Our principal goal is use pooling (for performance) and see diferent usernames at database level, this for facilitate administration tasks and auditory .
    We want that the application user autenticate with proxy users (username and password) but we have some problems because we don't know where specify that we're using proxy users. (The parameters OracleOCIConnectionPool.PROXY_USER_NAME
    OracleOCIConnectionPool.PROXYTYPE_USER_NAME).
    We want open our connections with the following code:
    OracleOCIConnectionPool ods = new OracleOCIConnectionPool();
    ods.setURL("jdbc:oracle:oci:@"+tnsAlias);
    ods.setUser("user_application");
    ods.setPassword("oracle");
    java.util.Properties prop = new java.util.Properties();
    prop.setProperty(OracleOCIConnectionPool.CONNPOOL_MIN_LIMIT,"3");
    prop.setProperty(OracleOCIConnectionPool.CONNPOOL_MAX_LIMIT,"20");
    prop.setProperty(OracleOCIConnectionPool.CONNPOOL_INCREMENT,"1");
    ods.setPoolConfig(prop);
    java.util.Properties userNameProp = new java.util.Properties();
    userNameProp.setProperty(OracleOCIConnectionPool.PROXY_USER_NAME,"Mark/123");
    Connection conn = ods.getProxyConnection(OracleOCIConnectionPool.PROXYTYPE_USER_NAME,userNameProp);
    with other user
    userNameProp.setProperty(OracleOCIConnectionPool.PROXY_USER_NAME,"Marty/123d");
    Connection conn = ods.getProxyConnection(OracleOCIConnectionPool.PROXYTYPE_USER_NAME,userNameProp);
    Thanks in advance
    Liceth

  • Dynamic Credentials and Web Service Data Controls

    I've followed Steve Muench's post on using Dynamic Credentials (14.     Dynamic JDBC Credentials for Model 1 and Model 2 [10.1.3.2] 2006, Upd: 17-MAY-2007), which works fine with the ADF BC part of the project. However, the project also contains Data Controls created from web services. I'm getting the following exception. Why are the web services being effected by the credentials and how can I fix it?
    Aug 31, 2007 12:38:41 PM oracle.adf.model.adapter.DataControlFactoryImpl createSession
    SEVERE: Exception:
    oracle.adf.model.adapter.AdapterException: DCA-40012: Failed to create a connection to the Web Service.
         at oracle.adfinternal.model.adapter.webservice.WSDefinition.loadFromMetadata(WSDefinition.java:659)
         at oracle.adf.model.adapter.DataControlFactoryImpl.createSession(DataControlFactoryImpl.java:163)
         at oracle.adf.model.binding.DCDataControlReference.getDataControl(DCDataControlReference.java:76)
         at oracle.adf.model.BindingContext.get(BindingContext.java:457)
         at oracle.adf.model.binding.DCUtil.findSpelObject(DCUtil.java:280)
         at oracle.adf.model.binding.DCUtil.findSpelObject(DCUtil.java:248)
         at oracle.adf.model.binding.DCUtil.findContextObject(DCUtil.java:383)
         at oracle.adf.model.binding.DCIteratorBinding.<init>(DCIteratorBinding.java:127)
         at oracle.jbo.uicli.binding.JUIteratorBinding.<init>(JUIteratorBinding.java:60)
         at oracle.jbo.uicli.binding.JUMethodIteratorDef$JUMethodIteratorBinding.<init>(JUMethodIteratorDef.java:138)
         at oracle.jbo.uicli.binding.JUMethodIteratorDef.createIterBinding(JUMethodIteratorDef.java:93)
         at oracle.jbo.uicli.binding.JUMethodIteratorDef.createIterBinding(JUMethodIteratorDef.java:84)
         at oracle.adf.model.binding.DCIteratorBindingDef.createExecutableBinding(DCIteratorBindingDef.java:277)
         at oracle.adf.model.binding.DCBindingContainerDef.createExecutables(DCBindingContainerDef.java:296)
         at oracle.adf.model.binding.DCBindingContainerDef.createBindingContainer(DCBindingContainerDef.java:425)
         at oracle.adf.model.binding.DCBindingContainerReference.createBindingContainer(DCBindingContainerReference.java:54)
         at oracle.adf.model.binding.DCBindingContainerReference.getBindingContainer(DCBindingContainerReference.java:44)
         at oracle.adf.model.BindingContext.get(BindingContext.java:483)
         at oracle.adf.model.BindingContext.findBindingContainer(BindingContext.java:313)
         at oracle.adf.model.BindingContext.findBindingContainerByPath(BindingContext.java:633)
         at oracle.adf.controller.v2.context.LifecycleContext.getBindingContainer(LifecycleContext.java:150)
         at com.awiweb.om.view.fwkExts.OMS_FacesPageLifecycleContext.initControllerClass(OMS_FacesPageLifecycleContext.java:23)
         at oracle.adf.controller.v2.context.LifecycleContext.<init>(LifecycleContext.java:53)
         at oracle.adf.controller.v2.context.PageLifecycleContext.<init>(PageLifecycleContext.java:48)
         at oracle.adf.controller.faces.context.FacesPageLifecycleContext.<init>(FacesPageLifecycleContext.java:37)
         at com.awiweb.om.view.fwkExts.OMS_FacesPageLifecycleContext.<init>(OMS_FacesPageLifecycleContext.java:17)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
         at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
         at java.lang.reflect.Constructor.newInstance(Constructor.java:494)
         at oracle.adf.controller.v2.context.LifecycleContext.getInstance(LifecycleContext.java:86)
         at oracle.adf.controller.v2.context.LifecycleContext.getInstance(LifecycleContext.java:65)
         at oracle.adf.controller.faces.lifecycle.ADFPhaseListener$1.before(ADFPhaseListener.java:404)
         at oracle.adf.controller.faces.lifecycle.ADFPhaseListener.beforePhase(ADFPhaseListener.java:77)
         at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:228)
         at com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:137)
         at javax.faces.webapp.FacesServlet.service(FacesServlet.java:214)
         at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
         at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._invokeDoFilter(AdfFacesFilterImpl.java:228)
         at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._doFilterImpl(AdfFacesFilterImpl.java:197)
         at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl.doFilter(AdfFacesFilterImpl.java:123)
         at oracle.adf.view.faces.webapp.AdfFacesFilter.doFilter(AdfFacesFilter.java:103)
         at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
         at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:162)
         at com.awiweb.om.view.fwkExts.OMS_ADFBindingFilter.doFilter(OMS_ADFBindingFilter.java:79)
         at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
         at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
         at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
         at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
         at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:221)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:122)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:111)
         at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
         at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:239)
         at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:34)
         at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:880)
         at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
         at java.lang.Thread.run(Thread.java:595)

    Please ignore this post. The problem was not related to the Web Service.

  • Dynamic Credentials with Webservice

    I'm developing a web service and need to establish a database connection based on a heavyweight user in the database. (Please...no discussion on that design...it is what it is at least for now.)
    So far I've created a class defining the service method. (This will be converted to a webservice later using the wizard.) I've created a separate project containing an AppModule through which I'll access the datasource.
    Use of dynamic credentials for web apps is discussed here: http://www.oracle.com/technology/products/jdev/howtos/bc4j/howto_dynamic_jdbc.html. However the example depends on the lifecycle's calling a subclass of SessionCookieFactory and passing of the UID/password via HttpSession object attributes. I'm assuming that a webservice would not have a call to the SessionCookieFactory in its lifecycle.
    Is there a way in a webservice design to dynamically set the username and password for the connection? I'm using an AppModuleImpl subclass in my project, but I haven't seen any methods for changing the username/password before or after my call to Configuration.createRootApplicationModule(String a, String b). {My connection string is defined in a database connection in the Connections Navigator.}
    I'm developing in JDev 10.1.3.1.

    OK...I was able to make this work by modifying the dynamic JDBC example:
    public Element serviceMethod(String username, String password, String parameter) {
    String amDef="mypkg.AppModule";
    String config="AppModuleLocal";
    ServiceEnvInfoProvider envInfo = new ServiceEnvInfoProvider(username, password);
    AppModuleImpl module = (AppModuleImpl)Configuration.createRootApplicationModule(amDef, config, envInfo);
    Element resultElement = processingMethod(parameter);
    return resultElement;
    }

  • CS4 Dynamic Link Problem

    Is anybody having trouble keeping the source files linked in After Effects after using dynamic link from Premiere?
    Please refer to this link:
    cwrig, "CS4 Dynamic Link Problem" #1, 26 Oct 2008 1:02 pm
    This is very frustrating.
    Thanks for your time!

    Did some more tests and here is what does and doesn't work for me.
    Losing footage -
    Yes I was having the issue (and the topic is in the premiere forum also)
    Here is what seems to solve it.
    It loses the footage if I use the original folder which has spaces in the name. Not sure if that is the culprit but both methods proved consistent in every test I did.
    it worked when I used a new folder called "Test" at the root of my editing drive.
    Crashing-
    Not sure if other have the issue but when I close AE, PPro will just sit there with an hour glass and show as not responding.
    If I close PPro first and then AE and reopen PPro then all seems to work as it is supposed to.
    This was also consistent in every test I did.

  • Sender JDBC Commn channel problem - Channel is not reading any data.

    Hi,
    I am referring to the following blog as i have exactly the same problem:
    [Blog|Sender JDBC Commn channel problem;
    I communication channel monitoring i am getting the following logs -
    6/21/10 7:19:07 PM   Processing started
    6/21/10 7:19:07 PM   Retry interval started. Length: 86400.0 seconds
    Here in the channel the poling interval is 86400 seconds.
    Now according to this blog the solution to my issue is "Check whether anything is locked in "Locking adapter" in VA? If there is then just release the lock and restart the comm channel. Note: In "locking adapter" the name will be something like $XIDBAD.JDBC2XI."
    Mine is a PI7.1 system and i am not able to find any thing like this in NWA.
    Can some one please help me on this?
    Thanks & Regards,
    Anshul

    try;
    Goto NWA -> Availability and Performance Management -> Resource Monitoring -> Locks

  • Dynamic credentials

    I am using dynamic credentials in my adf 11g application ,i want after user make login, to store his basic information - (name,salary,birthdate,...etc) which is store in database - to session variables to use these variables in all pages . how can i do that ?
    thanks in advance
    maher

    Maher,
    the ideal point is the method where you are sure the user has successfully logged into your system.
    There you get hold of the session, check if the bean is already instantiated and set its values. If you can't find the bean create it yourself and put it into the session.
    Timo

  • Differend between JAZN and Dynamic Credentials

    Please dose someone hase an article about this?? I want a clear article where it describes the differend between these two.
    thank you

    Hi,
    I don't think that this topic is worth an article.
    The difference is that JAZN performs J2EE container managed authentication in OC4J, whereas dynamic credentials allows ADF BC users to have their own database connection to their own schema (instead of sharing a database connection which then could be database pooled). So we are talking about comparing apples and beans here
    Frank

  • Dynamic Link Problem beim Batchencoden???

    Habe seit kurzem folgendes Problem: Exportiere ich mehrere Videos über den Media Encoder, habe ich bei fast der Hälfte der Filme "kaputte Videos" entweder nur an den Effekten oder beim kompletten Video. Rechne ich die Filme einzeln raus, ist alles ok. Das stinkt sehr nach Dynamic Link Problem. Ich kennen das z.T. schon in der Zusammenarbeit mit After Effects. Hier rechne ich meine Projekte erst, bevor ich sie in Premiere reinhole. Aber auf das Batchencoden kann ich nicht verzichten, da ich teilweise 30 und mehr Clips in verschiedenen Formaten rausrechnen muss und das wirklich nicht einzeln erledigen will.
    Frage: Hat jemand ne Idee (das Problem existiert erst seit kurzer Zeit), ob da irgendwelche caches vollaufen, kann man dynamic link irgendwie "resetten" oder muß ich das ganze Production Premium Paket CS5.5 neu installieren (wollte ich eigentlci vermeiden!!!!!)?
    Ach ja, System Windows 7 64Bit mit CS5.5
    Gruß
    Stefan

    Operator error. Answered my own question. I haven't used Dynamic Link much. It works fine. I was momentarily confusing the import of a PP project vs. a Dynamic Linked Sequence.  

  • Any way of finding out how Apple will solve the Aperture / ACR problem?

    Has anyone out there gotten any comments from Apple support or other people "in the know" about how Apple is going to solve the Aperture / ACR problem, and any potential time frame?
    Of course, Apple is going to work on problems with its own RAW conversion; that goes without saying. But does anyone have any knowledge of whether Apple is going to open up the ability for Apple to send RAW, unconverted images to Photoshop, so that ACR can handle them?
    I think knowing this now is pretty crucial. I am willing to live with the pain Aperture is going to impose on my workflow, in exchange for the file organization benefits it provides, IF I know that I'll be able to use Aperture with ACR soon (near term). But if Apple is going to just tinker with the RAW converter, and not attempt to send RAW files to ACR, then as someone else posted in another topic, this could be a long wait, and other companies have taken years to hone their RAW converters.
    This is kind of my last-ditch effort to keep Aperture around, and build my workflow around it. If I know that within a month or two at the most, I'll be able to be using ACR directly when editing new versions, then I'll absorb the pain until then. But if I am looking at waiting six months for it (several man years), or riding out the process of Apple trying to get their own converter fixed, then as much as I don't want to, Aperture is going to get returned or hit eBay.
    Does anyone have any idea on this? I've held up my projects for the past week trying to reorganize my workflow to work with Aperture, and I've got to pound the gavel, make a decision, and pursue a direction. Knowing what direction Apple is going to take with this makes all the difference in the world in what I do.
    Thanks in advance for any info you can pass on.
    Brad
    Powerbook G4-1.33GHz-17" / Powermac G4-1.4GHz   Mac OS X (10.4.2)   PB: 1GB RAM, Radeon 9600-64MB / PM: 1.25GB RAM, Radeon 9000Pro-128MB

    This "Open External Editor from Master NEF", versus open from a dynamicaly created version is, I have decided, crucial.
    I am getting less clumsy with the interface, but I simply can not get all white balance, and noise reduction done on my best available light shots.
    ACR in CS2, and a subsequent "Neat Image" scrubbing is excellent for this.
    The automatic association within a stack, of the resulting flattened file would be a big difference. I agree a formal statement from Apple would make me more inclined to really commit to Aperture for all my work.
    Going one step further, it would be nice to keep the layers on the round-trip Master file, even if you would work with a dynamicaly created version of the returned "master" within a stack. It would occupy more disk space, but would do so only for those images where the user has made a quality decision.
    Michael
    Powermac G5 dual 2GHZ, 2.5GB - 2x20in   Mac OS X (10.3.4)  

  • CF 10 getting random resets : Detail: [Macromedia][SQLServer JDBC Driver]A problem occurred when attempting to contact the server (Server returned: Connection reset).

      These resets appear to coincide with a clearing of the cached queries for the DSN from memory, breaking all my sub queries that try to use the initial cached one.  I am grasping at straws to discover the reset culprit, the DSN tests always show OK, there is not packet loss at the switch level.  If anyone has some suggestions, I am all ears!
      The resets are completely random and under no load.  My sql 2008 r2 box is set to unlimited connections.
    An example of a DSN setup is :
    Maintain Connections [x]
    String Format [ ]
    Max Pooled Statements 100
    Timeout 20 Interval 7
    Query Timeout 0
    Login Timeout 30
    CLOB [ ]
    BLOB [ ]
    Long Text Buffer 64000
    Blob Buffer 64000
    Validate Connection [ ]
    I am running the following :
    CF Enterprise 10,0,13,287689
    Tomcat 7.0.23.0
    Ubuntu 1204 x64
    Java VM 20.4-b02
    Java 1.6 (Sun Microsystems Inc)
      I have seen it suggested to uncheck the maintain connections advanced options but this doesn't seem like a good approach to the problem and will cause more stress on the sql box IMHO.
      I have also seen it suggested to enable Validate Connection but documentation on this is a bit sparse...
    Here are more examples of the initial reset error and then the subsequent cache related errors :
    Database Error Information:
    Native Error Code: 0
    SQL State: 08S01
    Query Error: [Macromedia][SQLServer JDBC Driver]A problem occurred when attempting to contact the server (Server returned: Connection reset). Please ensure that the server parameters passed to the driver are correct and that the server is running. Also ensure that the maximum number of connections have not been exceeded for this server.
    Custom Error Code: 08S01
    Database Error Information:
    Native Error Code: 0
    SQL State: n/a
    Query Error:
    Query Of Queries runtime error.
    Table named GlobalDetails was not found in memory. The name is misspelled or the table is not defined.
    Custom Error Code: n/a
    Thanks in advance to anyone who has a suggestion.

    Hi, could DBA check MS SQL Server connection logs???
    May be server has some limits (for example sessions, memory and e.t.c.)

Maybe you are looking for