[Solved (kindof)] No sound in Don't Starve

Hello. Earlier today I made this thread where I didn't get sound in Binding of Isaac. That was solved, as written, by doing what was described here.
That wiki article was about Don't Starve, which is the game I'm trying to play now, but the solutions in the wiki doesn't work for me. Everything works fine, except no sound. I've googled like crazy, and the solutions that solved it for others haven't for me.
I installed lib32-alsa-plugins, still no sound
I added the
LD_LIBRARY_PATH="/usr/lib:$LD_LIBRARY_PATH" %command%
to the startup parameters, and to my surprise, still no sound. Then I am out of ideas.
Starting steam through the console, then starting Don't Starve, gives out some errors:
Cannot read socket fd = 46 err = Success
Could not read result type = 22
Client name = rjack conflits with another running client
Cannot connect to the server
FMOD Error: Error initializing output device.
SoundSystem::Initialize failed
cDontStarveGame::DoGameSpecificInitialize()
FMOD Error: An invalid object handle was used.
Every time I hover over a button, that's supposed to make a sound, I get this
FMOD Error: Can't play event dontstarve/HUD/click_mouseover: An invalid object handle was used.
I use ALSA and JACK. Anyone got any idea? Thanks
I made a post about this issue in the Don't Starve reddit, to try and see if they know. Then I made this topic to see if you guys know. I just bought the game and really want to be able to play it.
Last edited by raggerv8 (2015-03-06 16:02:14)

A little update. Was going to play another game with a friend on steam, also didn't work with sound. So I looked into if I could install PulseAudio alongside JACK, so that I could just start Pulse and have the game use that if needed. Worked. I had to use the
LD_LIBRARY_PATH="/usr/lib:$LD_LIBRARY_PATH" %command%
launch parameter to get the sound to work, still.
Even with Pulse, sound in Don't Starve doesn't work. I can now however go to the settings, up the sound, save, and have the sound not reset back to zero. So that works.

Similar Messages

P755 and Realtek HD Audio Manager sound effects don't work

Hi. I have a P755 and the Realtek HD Audio Manager sound effects don't work. Everything seems to be up to date, but the equalizer and environment features have never worked. I am using the Analog stereo out. The Speaker Configuration is Stereo. The only thing that seems to change the audio characteristics is switching from Headphone to Line Out.
Solved!
Go to Solution.

Satellite P755-S5390
Can't hurt to reinstall the drivers.
Realtek Audio Driver
nVidia HD Audio Driver
-Jerry

When i m in a call i touch the screen with my cheek and i keep on putting calls on hols or speaker..how do i solve this?if i don t want a headset?when i m in a call i touch the screen with my cheek and i keep on putting calls on hols or speaker..how do i

when i m in a call i touch the screen with my cheek and i keep on putting calls on hols or speaker..how do i solve this?if i don t want a headset?

SORRY, the picture is just to illustrate and to better show the area where the time display is located, same place in the iPhone 3gs, to my knowledge, the location is the same, due to the OS on both phones.
Second, run the test to see if it works:
1st test: go to phone mode, select dial key pad, put the tip of your thumb in top of the time display ( the screen will not go black), try to dial.
2nd test: place a call, after starts ringing switch the display to dial pad, put the tip of your thumb on top of the time display, the screen will not go black, try to dial.
THE SCREEN WILL ONLY GO BLACK ( INACTIVE) IF YOU TOUCH A LARGER AREA TO THE TOP OF THE DISPLAY, IF THE THUMB ONLY TOUCHES THE TIME DISPLAY AND A LITTLE PART OF THE AREA WHERE THE NUMBERS APPEAR THE DIAL PAD DID NOT WORK EVEN WITH THE DISPLAY NOT GOING BLACK (INACTIVE).
I am also trying in my wife's iPhone 4 as I right this post and both phones behave the same way.
I found out what I stated above after running tests to see if the case was affecting the phones performance.
Due to the thickness of the case on the sensor area, it really did affect the way the sensor was supposed to work, after I cut that part on the case, the sensor started to work perfectly and the screen turns off during a call like it is supposed to do.
So before someone go nuts thinking that the phone is not working and that they have to take it to repair, try seeing if the case is not interfering with the phones performance.

Youtube videos I placed in a site made in Muse, don't have sound and don't auto play in my Android phone. Can anyone tell me why? The same video has no problems when I watch it at the youtube site on my phone. It has sound on an iphone, but doe

Hello. The Youtube videos I placed in a site made in Muse, don't have sound and don't auto play in my Android phone. Can anyone tell me why? The same video has no problems when I watch it at the youtube site on my phone. It has sound on an iphone, but doesn't auto play either. Thanks!

Hi Mariana,
Please make sure you have the autoplay checkbox selected from the fly-out options:
Regards,
Akshay

In my iPad 2 sound notifications don't work anymore

In my iPad 2 sound notifications don't work anymore

Have you got notifications muted ? Only notifications (including games) get muted, so the Music and Videos apps, and headphones, still get sound.
Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad above the volume switch, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085

My Final Cut sound effects don't show up, how can I get them?, My Final Cut sound effects don't show up, how can I get them?

My Final Cut sound effects don't show up, how can I get them?, My Final Cut sound effects don't show up, how can I get them?

Have you downloaded them?
Incidentally, you seem to have a bad echo.

Solving the distorted sound?

Hi, I have itunes v7.1 and am experiencing the same sound problems everyone else seems to , (poor and lowers the volume in the middle by itself). I was thinking of installing v6.5 software but will that solve the bad sound on my music automatically or will I have to re input my cd's into itunes to resolve the sound quality issue?

You might try upgrading to the laterst version.
Also see troubleshooting sound problems:
http://docs.info.apple.com/article.html?artnum=93610
Having said that, I had to downgrade to 6.0.5.
It is not a problem, but you have to retrieve your old 6.0.5 library from Previous iTunes Libraries folder.
You can find the old version here:
http://www.apple.com/support/downloads/itunes605forwindows.html

[SOLVED] Multiple sound cards don't work with Arch

Before you post, make sure you do not list any of these programs that I should use, to configure everything:
alsamixer
alsaconf
kmix
xfce4-mixer
edit: I need to specify what my default sound device is as I have 2 different sound cards, a Logitech ClearChat Comfort, and a TurtleBeach AK-R8.
Websites of my sound products:
http://www.turtlebeach.com/products/akr8/home.aspx
http://www.realtek.com.tw/products/prod … ProdID=135
http://www.fatal1ty.com/products/scards/660.php
http://www.logitech.com/index.cfm/webca … 1&cl=US,EN
I use Windows for gaming (in virtualbox) on America's Army, so good audio is a must when you play against the best.
The reason I state that is because those lack the features I need. I am trying to find gnome-sound-properties and since I needed sound working very fast, and a distro that already has it installed, I am currently on Ubuntu (please do not harass me or insult me about this as I hate it very much and I need to get back to software development) since all I need to do is go to System > Preferences > Sound. Is a picture of what I am looking for:
Last edited by Neo_The_User (2009-09-27 23:28:38)

Solved. all i needed to do was turn up the center and surround thing in alsamixer. works now in true 5.1

[SOLVED]Problem with sound in HDMI

Hello good society of Arch
Now I have problems with sound from HDMI. I use Arch as an tvPc, wasting movies and tv shows on it. I use ALSA and it works well, except of a few files that I have, then there is picture but sound is either twisted or not played at all. It does not matter whether I use vlc or mplayer, I'm experiencing the same problem.
I have not found anything about this with google, other problems have been either hdmi sound working or not, not like it is with me, sometimes it works and sometimes it don't.
I know that the files are ok, I can play them in anther pc I have (also using Arch on that pc).
Does anybody know what the problem might be? What do I have to look at to find out what the problem is? This have been like this for some time now, but I haven't looked into it before, because I don't use TV that muts, but the wife does and when she stats blaming Arch, I have too do something about it.
I have never encountered problem with Arch that i cant solve by using this forum and google
Thanks
Last edited by Vaski (2010-08-21 01:08:42)

cleanrock wrote:I noticed i got no audio over hdmi on some video file which had a low audio bitrate, i solved it by resampling the sound to 48000 in ~/.mplayer/config :
af=resample=48000
I will look at this when i come home from work, thanks.
nTia89 wrote:have you already read our wiki ?
Yes i have, and sound is working, well most of the time.

[Solved]Alsa funkiness (sound breaking)

(Note: I originally thought this was a steam issue, but turns out it's not only steam that can break my sound (see the update on the bottom))
I get an issue with Steam where I get a short (less than 1s) sound on repeat/loop (usually it's some part of the message notification sound, or a trailer that I was watching) sounding a bit like a broken record, randomly occurring after keeping steam open for long periods of time in the background. Only fix I've found so far is to restart steam.
I have the Enlightenmen 18 Window Manager.
Notable errors:
Fontconfig error: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 70: non-double matrix element
Fontconfig warning: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 78: saw unknown, expected number
[0706/170950:ERROR:object_proxy.cc(239)] Failed to call method: org.freedesktop.DBus.Error.ServiceUnknown: The name org.freedesktop.NetworkManager was not provided by any .service files
[0706/170950:WARNING:proxy_service.cc(958)] PAC support disabled because there is no system implementation
PulseAudio connect failed (used only for Mic Volume Control) with error: Access denied
** (steam:7341): WARNING **: Could not initialize NMClient /org/freedesktop/NetworkManager: The name org.freedesktop.NetworkManager was not provided by any .service files
(steam:7341): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
[0706/171536:ERROR:reference_audio_renderer.cc(46)] Not implemented reached in virtual void media::ReferenceAudioRenderer::OnCreated(media::AudioOutputController*)
[0706/171536:ERROR:reference_audio_renderer.cc(50)] Not implemented reached in virtual void media::ReferenceAudioRenderer::OnPlaying(media::AudioOutputController*)
[0706/171657:ERROR:reference_audio_renderer.cc(54)] Not implemented reached in virtual void media::ReferenceAudioRenderer::OnPaused(media::AudioOutputController*)
AL lib: pulseaudio.c:612: Context did not connect: Access denied
I don't have any reliable method to reproduce the issue, and it does not seem to output an error of it's own in the terminal output when it occurs. I have noticed that this is more likely to occur when steam has been open for prolonged periods. I am not using pulseaudio, just Alsa. I also noticed when I was running a Wine game (not through steam) that this issue occurred, and it seemed to contaminate the sound outputs for whine too (I got like a "double" sound for every sound effect the game played). If the sound was completely broken on steam and making a loop like I explained at the start of this post and then I close steam while the Wine game is running, the sound from steam will remain until I shut down the game too (i.e. seems that this isn't just breakage internally in steam, but in alsa itself)
The one thing I have tried to solve this was install lib32-libpulse, this did not seem to fix the errors nor the problem. I imagine installing pulseaudio could fix this problem, but pulseaudio downright hates my sound card, so I would rather not use it.
I also have two other issues too that are less severe.
1: Mouse cursor sometimes gets locked in steam instance (Right clicking will show the steam context menu, pressing "stop" in that context menu will solve the issue. This sometimes happens when I use "Ctrl + C"(copy) or "Ctrl + V"(paste) when I'm typing in the discussions)
2: Fullscreen videos will not go fullscreen (they will only fill the steam window)
Update:
I found a bulletproof way to make a similar issue occur.
If I open facebook in firefox, and get a message notification while I am playing a movie in Cmplayer (my media player of choice) the sound in CMplayer breaks (but firefox's sound keeps working normally)
Update2:
I was rather desperate to get this fixed so I installed pulseaudio as much as I despise it, the quality of my audio is damaged by it, but this problem was as I suspected fixed by installing it. I am guessing pulseaudio is set up partially to prevent issues like this one, but I would relaly prefer not to have it. This does not rid me of all the errors however (reference_audio_renderer errors persist) but it does create a new error for steam:
[0706/215704:ERROR:alsa_output.cc(684)] Failed querying delay: Input/output error
Last edited by rabcor (2014-07-11 16:28:34)

I always had to have an asound.conf in the name of upmixing 2.0 to 5.1 This is the content of my asound.conf before I made the changes. I also had a problem with a game where I had crackling noises on 48khz so I had to tell alsa to force 96khz (or 44.1khz but since my card supports 96khz that's what I went with) to avoid that.
pcm.!default {
slave.pcm "surround51"
slave.channels 6
type route
# Front and rear
ttable.0.0 0.7
ttable.1.1 0.7
ttable.2.2 0.6
ttable.3.3 0.6
# Center and LFE
ttable.4.4 1
ttable.5.5 1
# Front left/right to center
ttable.0.4 0.5
ttable.1.4 0.5
# Front left/right to rear
ttable.0.2 0.5
ttable.1.3 0.5
Now it looks like this and everything seems to be working fine (except that mono sound only plays from my left speaker and I haven't defined a way to downmix 7.1 to 5.1):
pcm.dmixed {
type asym
playback.pcm {
# See plugin:dmix at http://www.alsa-project.org/alsa-doc/alsa-lib/pcm_plugins.html
type dmix
# Don't block other users, e.g. the Timidity midi-player daemon
# http://www.alsa-project.org/alsa-doc/alsa-lib/pcm_plugins.html
ipc_key_add_uid true
ipc_key 5678293
ipc_perm 0660
ipc_gid audio
# Don't put the rate here! Otherwise it resets the rate & channels set below, as shown by: cat /proc/asound/card0/pcm0p/sub0/hw_params
slave {
# 2 for stereo, 6 for surround51, 8 for surround71
channels 6
pcm {
# mplayer chooses S32_LE, but others usually S16_LE
format S32_LE
#format S16_LE
# 44100 or 48000
# 44100 for music, 48000 is compatible with most h/w
#rate 44100
rate 96000
# http://www.alsa-project.org/alsa-doc/alsa-lib/pcm_plugins.html
# Maybe helps
nonblock true
type hw
card 0
device 0
subdevice 0
# mplayer2 chooses 1024
# period_size 512 with buffer_size 16384 stops crackling in xmame
# 320 breaks flash - https://bbs.archlinux.org/viewtopic.php?id=129458
#period_size 512
period_size 1024
#period_size 512
# 4096 might make sound crackle
# mplayer2 chooses 8192. Half-Life 2 chooses 16384.
# If too large, use CONFIG_SND_HDA_PREALLOC_SIZE=2048
buffer_size 16384
capture.pcm "hw:0"
pcm.!default{
type plug
slave.pcm "upmix20_51"
pcm.!surround20 {
type plug
slave.pcm "upmix20_51"
pcm.!surround40 {
type plug
slave.pcm "dmixed"
route_policy duplicate
pcm.!surround51 {
type plug
slave.pcm "dmixed"
pcm.upmix20_51 {
slave.pcm "dmixed"
slave.channels 6
type route
# Front and rear
ttable.0.0 0.7
ttable.1.1 0.7
ttable.2.2 0.6
ttable.3.3 0.6
# Center and LFE
ttable.4.4 1
ttable.5.5 1
# Front left/right to center
ttable.0.4 0.5
ttable.1.4 0.5
# Front left/right to rear
ttable.0.2 0.5
ttable.1.3 0.5
Is there a better way for me to achieve the results of the above config? Because I'm all ears.
Last edited by rabcor (2014-07-08 11:09:23)

[solved] No speaker sound after suspend

Hey I'm wondering if someone can help me out with this. My speakers work fine after cold boot / reboot, but after suspend there is no sound. Headphones still work before / after suspend. This started quite a while ago, and I've been following this other thread: https://bbs.archlinux.org/viewtopic.php?id=163248 but nothing has worked so far.
It's on a Dell M1330 laptop. Below are some hopefully helpful outputs - I didn't notice anything different between before and after suspend outputs.
Any help is appreciated. Thanks
dg@dg-laptop> cat /proc/asound/card0/codec\#0 | grep Codec
Codec: SigmaTel STAC9228
lspci -vvnn (relevant bits)
00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 02)
Subsystem: Dell Device [1028:0209]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 46
Region 0: Memory at f6ffc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
dg@dg-laptop> amixer ~
Simple mixer control 'Master',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback 0 - 127
Mono: Playback 107 [84%] [-15.00dB] [on]
Simple mixer control 'Headphone',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 127
Mono:
Front Left: Playback 127 [100%] [0.00dB] [on]
Front Right: Playback 127 [100%] [0.00dB] [on]
Simple mixer control 'Headphone',1
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 127
Mono:
Front Left: Playback 127 [100%] [0.00dB] [on]
Front Right: Playback 127 [100%] [0.00dB] [on]
Simple mixer control 'Speaker',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 127
Mono:
Front Left: Playback 127 [100%] [0.00dB] [on]
Front Right: Playback 127 [100%] [0.00dB] [on]
Simple mixer control 'PCM',0
Capabilities: pvolume
Playback channels: Front Left - Front Right
Limits: Playback 0 - 255
Mono:
Front Left: Playback 255 [100%] [0.00dB]
Front Right: Playback 255 [100%] [0.00dB]
Simple mixer control 'Mic Boost',0
Capabilities: volume
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 4
Front Left: 0 [0%] [0.00dB]
Front Right: 0 [0%] [0.00dB]
Simple mixer control 'IEC958',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'IEC958 Default PCM',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'IEC958 Playback Source',0
Capabilities: enum
Items: 'Digital Playback' 'ADAT' 'Analog Mux 1' 'Analog Mux 2' 'Analog Mux 3'
Item0: 'Digital Playback'
Simple mixer control 'Beep',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback 0 - 3
Mono: Playback 0 [0%] [-18.00dB] [on]
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch
Capture channels: Front Left - Front Right
Limits: Capture 0 - 14
Front Left: Capture 0 [0%] [0.00dB] [on]
Front Right: Capture 0 [0%] [0.00dB] [on]
Simple mixer control 'Capture',1
Capabilities: cvolume cswitch
Capture channels: Front Left - Front Right
Limits: Capture 0 - 14
Front Left: Capture 0 [0%] [0.00dB] [off]
Front Right: Capture 0 [0%] [0.00dB] [off]
Simple mixer control 'Capture',2
Capabilities: cvolume cswitch
Capture channels: Front Left - Front Right
Limits: Capture 0 - 14
Front Left: Capture 0 [0%] [0.00dB] [off]
Front Right: Capture 0 [0%] [0.00dB] [off]
Simple mixer control 'Auto-Mute Mode',0
Capabilities: enum
Items: 'Disabled' 'Enabled'
Item0: 'Enabled'
Simple mixer control 'Digital',0
Capabilities: cvolume
Capture channels: Front Left - Front Right
Limits: Capture 0 - 120
Front Left: Capture 60 [50%] [0.00dB]
Front Right: Capture 60 [50%] [0.00dB]
Simple mixer control 'Input Source',0
Capabilities: cenum
Items: 'Mic' 'Internal Mic' 'Internal Mic 1'
Item0: 'Internal Mic'
Simple mixer control 'Input Source',1
Capabilities: cenum
Items: 'Mic' 'Internal Mic' 'Internal Mic 1'
Item0: 'Internal Mic'
Simple mixer control 'Input Source',2
Capabilities: cenum
Items: 'Mic' 'Internal Mic' 'Internal Mic 1'
Item0: 'Internal Mic'
Last edited by dandaman0061 (2013-07-16 14:06:07)

buri wrote:
Same problem, kenel 3.9.x and 3.10.x on my old Dell Vostro 1500. Try this:
edit /etc/modprobe.d/alsa-base.conf
options snd-hda-intel enable_msi=0 model=eapd
I found solution on the internet and I do not know why it works.
This didn't seem to work for me...
skunktrader wrote:I had the same problem, but setting "Auto-Mute Mode" to disabled solved it for me
This did work! It'd be nice to have the auto-mute functionality, but I don't use headphones *that* often.
Thanks to both!

[SOLVED]No more sound in flash, but kmix shows a stream

Hello all,
I'm fairly new (and happy that I switched) to Arch . When I installed Arch on my x86_64 based laptop everything worked fine. Somewhere along the line I lost sound in flash. I use KDE with the defaults for sound: Phonon, Pulse, and ALSA. For my phonon backend I'm using VLC, but have also tried gstreamer. I first realized the issue in late November and have since been wrestling with it in my spare time to no avail. I have tried everything in the forums and wikis that I could find (even if it seemed like it didn't apply). The one difference that I'm experiencing that no one else has posted is that I have a stream show up in kmix when a video is playing, but still have no sound. It's not muted, and I can move the volume slider with no change. I have no idea when exactly it broke, or what update may have caused it. Has anyone had this issue and solved it without posting? Can anyone offer some troubleshooting advice? I was previously a Gentoo user of 6+ years and wonder if there are any Arch tools similar to equery (depends and depgraph flags) that can help me find all the packages installed that are related to flash? Also, is there anything in Arch that is similar to the Gentoo emerge log? I would like to clean out everything flash and pulse related and start from scratch, but don't know the best way, or even a clean way, to approach this.
Thank you in advance for any help offered.
Regards,
Joseph
Last edited by jdwieber (2012-01-13 18:46:16)

@alexkarro Thanks for your quick reply and for the links. Unfortunately, I followed the advice from both links. I have both lib32-alsa-plugins and lib32-libcanberra-pulse installed. From what I understand about the first link, my default device is the correct device. But just in case I'm wrong I pasted the output from aplay and my asound.conf below. Am I misinterpreting the output to aplay, or configuring my asound.conf wrong? Originally, when it worked, I got all the config instructions from https://wiki.archlinux.org/index.php/PulseAudio.
Thanks again.
jdwieber@beast:~$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC892 Analog [ALC892 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 1: ALC892 Digital [ALC892 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 7: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 8: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 9: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
jdwieber@beast:~$ cat /etc/asound.conf
# Use PulseAudio by default
pcm.!default {
type pulse
ctl.!default {
type pulse
# Explicit PulseAudio device
pcm.pulse {
type pulse
ctl.pulse {
type pulse
# vim:set ft=alsaconf:

Sound is gone. Sound settings don't show any available output. Mute is checked. Cant uncheck

Suddenly, the sound on my Mac is muted. I tried to unmute using the keyboard. I can not. I went to preferences, sound and Output does not show anything available. There is no option for internal speakers or any other sound item. Mute is checked and I can not uncheck. Yesterday sound worked fine.

There are many possible causes for this issue. Take each of the following steps that you haven't already tried.
1. Start with the steps recommended in this support article. Don't skip any of the steps. It's the starting point for further efforts to solve the problem.
2. If your model has an audio-out (headphone) port, and anything is plugged in, unplug it before putting the system to sleep.
3. If you've installed an application called "Memory Clean" or any other third-party software that is supposed to "clean" or "purge" memory automatically, remove it according to the developer's instructions and restart. You should do that even if the software is not causing the problem, because it's useless.
4. If you've installed a software equalizer called "Boom" or anything similar, update or delete it and restart.
5. If an AirPlay device is selected for sound output from iTunes (or from other applications via third-party software such as "Airfoil"), deselect it.
6. Launch the application "Audio MIDI Setup" by entering the first few letters of its name in a Spotlight search and selecting it in the results (it should be at the top.) Select the Output tab. If the Mute boxes are checked, uncheck them. Move the Volume sliders all the way to the right.
7. If a red light is coming from the audio-out port, the internal switch is stuck in the position for digital output. You may be able to free it by inserting and removing a mini-stereo jack of the proper size. Inserting any kind of tool in the port may cause damage that won't be covered by your warranty.
If there's no red light, the switch may still be stuck in the headphone position. Try to free it the same way.
8. Disconnect all wired peripherals except keyboard and mouse, if applicable. If more than one display is connected, disconnect all extra ones. Restart and test.
9. If you have a MacBook Air, turn off Bluetooth and restart.
10. Start up in safe mode. Don't log in; just restart as usual when the login screen appears. When you do, make sure the words "Safe Boot" do not appear in the login screen. If they do, the system is still in safe mode and sound won't work.
11. Reset the NVRAM.
12. Reset the SMC.
13. Reinstall OS X after backing up all data. For a possible shortcut, see this thread.
14. Make a "Genius" appointment at an Apple Store.

[SOLVED] Too average sound level [Thinkpad T60]

Hi,
Since a week I've changed my computer to an old one, a Thinkpad T60 (2006). And ArchLinux works mostly fine except for the sound level. In each programs, even in alsamixer, I put everything to the maximum level (Master, PCM, sound level of the program etc) and it's still too close of an average level. My speakers on other device are two times stronger than on the T60. Even if I plug headphone the sound is still too close of the average power of my speaker.
Since it doesn't seems to be a configuration problem and if the speakers works great as usual, it seems to be a problem related to the T60. I've tried the mini jack on the laptop and the one on the dock, still the same result. I've also a Razer keyboard which have a mini speaker input too, same problem.
This is my sound card: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 02)
I don't know what to do to solve this problem, if I can.
Thanks for your help and tell me if you miss an information.
Cordially, Koshie
Last edited by koshie (2014-04-26 15:52:37)

Did you turn the hardware volume level up? (Using volume buttons, potentiometer, although lenovo does not mention that) I doubt that there are settings on volume level/gain in bios/uefi. As last resort, you can always add a softvol plugin to your alsa configuration.
Can you test volume levels with another operating system? Maybe even another live linux distribution like mint. Please post following:
aplay -lL; lspci -nn | grep -i audio; amixer -c 0;

(SOLVED) No system sounds, and no sound for some applications

For some reason, system sounds stopped working (like when one takes a screenshot). aplay plays sounds (I mean, no errors whatsoever), but I can hear nothing. Listening from mplayer or vlc still works as normal.
When I 'aplay sound.wav', I see the leds going up and down on pavucontrol, but I hear nothing.
I run openbox and I don't start gnome-settings-daemon with it. It is "pure" openbox.
I checked pavucontrol settings, and also alsamixer but couldn't find anything that could solve the problem. I use pulse-audio, and have pulseaudio-alsa and alsa-utils installed.
Last edited by FernandoBasso (2013-11-16 22:09:34)

raavas wrote:Good thing you posted the solution, even when you found it elsewhere. This helped me too, my speaker channel was at somehow set at zero.
Yeah, I can guarantee that I didn't touch alsamixer myself. I didn't even know the F6 option (although, today I realized it is there very well visible). Anyway, I guess an update might have changed something... I saw other people with similar problems in #archlinux this morning.

[Solved (kindof)] No sound in Don't Starve

Similar Messages

Maybe you are looking for