[SOLVED] logout-prompt command for xfce's xfdesktop

I just started using xfce and avant window navigator (also know as awn), and in the last mentioned there is a launcher to log out of the system - which I would really like to use.
My problem is that this launcher has to get the right command to get to the normal xfce logout prompt (the one that shows up if you open the normal xfce menu and chooses quit). I know that the command xfce-session-logout worked in older versions of xfce, but it seems that xfce has changed the structure since then, now running under the process xfdesktop.
Does anyone know the command to get up the logout prompt?
Last edited by bozack (2008-07-13 13:18:17)

Sorry, figured it out by myself, the correct command was xfce4-session-logout.
Last edited by bozack (2008-07-13 13:17:47)

Similar Messages

  • [Maybe solved] Repeated prompts for username and password on HTTP(S)

    I'm new to IOS but I'm taking ICND 1 and ICND 2 to catch up. I've gone as far as configuring a 3560 switch from "scratch" in a test environment, and am in part one of ICND 2.
    Setting this switch up for HTTP administration, I've been prompted repeatedly for my username and password both when using a browser directly and when using Cisco Network Assistant (currently 5.5). This is different from the production switches I'm working with, that will prompt me once only and let me work. At first I suspected this was because I'm trying to use SSL and an in-house certitficate authority to sign the switch's certificate, but this is happening in plain HTTP as well.  If I'm persistent enough, I eventually get the pages or configuration screens I want.
    The difference between the production 3560s and my testing one, is the test one uses IOS 12.2(53), the current version.  The production ones use 12.2(25)SEE3 through 12.2(35)SE5 and probably everything in between.  I'm also experimenting with the releases that includes the web-based device manager on my test switch, but the behaviour is similar whether the image has the web-based manager or not.

    In an update to this problem, I've reverted the switch I've been testing back to 12.2(35)SE5, which is what the majority of my production 3560s use. It appears to behave in the same fashion: Repeatedly asking for credentials over HTTP(S).
    While my non-production switch has a local user database set up, my production switches use two ACS servers.  The relevant bits of the running config are:
    aaa new-model
    aaa group server tacacs+ mcbhtacacs
    server 10.1.2.221
    server 10.1.2.222
    aaa group server radius mcbhradius
    server 10.1.2.221 auth-port 1645 acct-port 1646
    server 10.1.2.222 auth-port 1645 acct-port 1646
    aaa authentication login default group mcbhtacacs local
    aaa authentication login LOCALAUTH local
    aaa authorization exec default group mcbhtacacs
    aaa accounting send stop-record authentication failure
    aaa accounting exec default start-stop group mcbhtacacs
    aaa accounting commands 1 default start-stop group mcbhtacacs
    aaa accounting commands 15 default start-stop group mcbhtacacs
    aaa accounting system default start-stop group mcbhtacacs
    aaa session-id common
    tacacs-server host 10.1.2.221 key 7 [censored]
    tacacs-server host 10.1.2.222 key 7 [censored]
    tacacs-server directed-request
    radius-server host 10.1.2.221 auth-port 1645 acct-port 1646 key 7 [censored]
    radius-server host 10.1.2.222 auth-port 1645 acct-port 1646 key 7 [censored]
    radius-server source-ports 1645-1646
    Another switch that does work without repeated prompting has these relevant bits:
    aaa new-model
    aaa group server tacacs+ mcbhtacacs
    server 10.1.2.221
    server 10.1.2.222
    aaa group server radius mcbhradius
    server 10.1.2.221 auth-port 1645 acct-port 1646
    server 10.1.2.222 auth-port 1645 acct-port 1646
    aaa authentication login default group mcbhtacacs local
    aaa authentication login LOCALAUTH local
    aaa authorization exec default group mcbhtacacs local
    aaa accounting send stop-record authentication failure
    aaa accounting exec default start-stop group mcbhtacacs
    aaa accounting commands 1 default start-stop group mcbhtacacs
    aaa accounting commands 15 default start-stop group mcbhtacacs
    aaa accounting system default start-stop group mcbhtacacs
    aaa session-id common
    tacacs-server host 10.1.2.221 key 7 [censored]
    tacacs-server host 10.1.2.222 key 7 [censored[
    tacacs-server directed-request
    radius-server host 10.1.2.221 auth-port 1645 acct-port 1646 key 7 [censored]
    radius-server host 10.1.2.222 auth-port 1645 acct-port 1646 key 7 [censored]
    radius-server source-ports 1645-1646
    10.1.2.221 and 10.1.2.222 are the ACS servers, running ACS 4.1 and are linked to a pair of Active Directory domain controllers.
    Aside from host names, these two switches appear to have an identical AAA configuration.  So why would the first switch repeatedly ask for credentials over HTTP when the second switch with the same software does not?

  • Dynamic Command Parameter Prompts twice for Value

    I am having trouble in CR 2008 with command parameters.  Whenever I make the command parameter dynamic, I am prompted twice for the value: first I'm prompted to enter the value freehand, then the second prompt is a dropdown list with just the freehand value (or an error if the freehand value does not exist in the db).
    I need to use dynamic command parameters for two reasons: 1) to allow users to select the value from a dropdown list rather than a free-text value, and 2) to limit the record set returned from my initial command query.
    Any help on how to get dynamic command parameters to display all values in a dropdown list, and in one prompt, is appreciated!

    Hi
    If you create a parameter in your command it will be always static.  You can't make this as dynamic because, once your command get executed only you will get values in your report or in your list of values (dynamic parameter).
    There is a work around for this :
    --Create a report with command without any parameters at command level
    --Create a dynamic parameter at report level and do not place any fields in your report.
    --Now insert your orginal report as sub report in Report footer.
    --Right click on your sub report and go in change sub report links and link Main report dynamic parameter to your sub report command parameter.
    --Suppress all other section in your main report.
    Now when you refresh, it will execute your main report dynamic parameter with pick list.  Once user selects a value it will be passed to your command parameter.
    Thanks,
    Sastry

  • [SOLVED] Error running install command for soundcore

    Hi,
    I use OSSv4 instead of ALSA. Everything is working correctly but I noticed an error message in the bootlog:
    systemd-udevd[204]: Error running install command for soundcore
    What does this mean? Why is there an error?
    Of course I blacklisted the ALSA module as it is described in the wiki: https://wiki.archlinux.org/index.php/OSS#Install
    best regards
    nuc
    Last edited by nuc (2013-02-07 18:09:57)

    Ok, thanks for the info.
    But why does the wiki suggest to run "install soundcore /bin/false" instead of just "blacklist soundcore"? In earlier revisions the wiki suggested to do "blacklist soundcore" (https://wiki.archlinux.org/index.php?ti … did=231068).
    Doesn't this actually have the same effect?
    EDIT:
    I found this https://wiki.archlinux.org/index.php/Ke … acklisting
    Last edited by nuc (2013-01-27 18:20:01)

  • [SOLVED] Can you wrap commands for sudo?

    Is there a way to wrap commands for use with sudo, such that my below command would work:
    $ sudo (pacman -Sy && pacman -Su)
    bash: syntax error near unexpected token `pacman'
    Note: The above is just an example of what I want to do, I would normally use 'pacman -Syu'
    Last edited by deltaecho (2008-09-15 06:18:24)

    You could simply alias it with pacman.  This is what I do, and I know I'm not alone.
    In .bashrc:
    alias pacman='sudo pacman'
    And I also have it set to not ask for a password with pacman in my sudoers file.

  • Prompt command with JBuilder

    i have just purchased my first JAVA book
    "A Framework for Programming and Problem Solving"
    Anyway, I have not gotten far at all because it asks me to use the prompt command early on to find the directory or make up one. I don't understand what that means. It came with a CD Rom with JBuilder on it. Why am I having to type using the command prompt and notepad as an editor? Is the JBuilder not the compiler/editor? I am confused and frustrated. Please help.

    JBuilder is an IDE (Integrated Development Environment).
    The Java SDK contains the compiler.
    Notepad is a text editor.
    There are many ways to enter, compile and run Java
    programs. JBuilder is one environment, but it separates
    the programmer from what is actually going on within the
    computer. The author is probably trying to encourage
    you to use notepad and the command prompt so that
    you will understand what JBuilder does for you when you
    tell it to "Make MyProject".
    IMHO, when you are first learning to program, using a
    text editor is probably best because you are required to
    write all of the code and you control the compilation and
    execution yourself. When you understand the basics of
    programming it's great to use an IDE for the features that
    they include. I would also suggest that you use TextPad
    instead of notepad. It can be used to highlight Java code
    and can also be configured to compile and run your
    programs.
    Hope that helps!
    Mark

  • TS3276 Web through this step-by-step, but alas it did not solve the problem. For some reason I can download mail on my Macbook Pro, but no my iMac. Connection Doctor shows all green lights.

    Went through this step-by-step, but alas it did not solve the problem. For some reason I can download mail on my Macbook Pro and iPhone, but no my iMac. Connection Doctor shows all green lights. This started today when I was prompted to re-enter incoming mail server passwords. I re-entered passowrds yet again to make sure they were correct. Rebuilt the inBox. Connection Doctor continues to show all green lights, but am still unable to download mail to the inbox. Has anyone else ever run into this problem?

    I have the exact same problem trying to use the Remote app on both my iPhone 3gs and iPad 2 with either my Mac or ATV2.  My Remote app used to work on my phone - I can't recall if I ever actually used it with my iPad, but when I tried today, I got all the same results as you did (on both iPad, and then iPhone).  I  was using my ATV2 to play music from iTunes on my Mac and wanted to use the Remote app, but it would not connect to either device no matter what I did. 

  • Hye master.i want to install windows 8.1 but it can't and the prompt command had been out on my laptop screen.

    When i boot the cd,it can boot but after a while,the prompt command had been display on my laptop screen then i can't install the windows.anyone can help me?i'm from malaysia.thank you all

    Hi,
    Please refer to the guide provided by
    T. Kujala to correctly install Windows 8.1, if you have already followed the instruction, and the issue persists, then please post a screen shot of the "prompt command displayed on the screen" you mentioned for better understanding. Meanwhile,
    please make sure that the installation CD itself is not broken.
    Yolanda Zhu
    TechNet Community Support

  • Key Command for "Go to Next Marker" doesn't work properly

    Hi there!
    While using Logic Pro 9.1.8 with Mountain Lion (10.8.2), it seems that the Key Command for "Go to Next/Previous Marker" doesn't work properly.
    The only effect is, that a grey rectangle moves in the top of the Arrange Area while ignoring the Markers itself.
    Any suggestions to solve it or is it me that is misbehaving?
    Cheers, GJ

    Hi
    The commands work correctly here on the same OS etc: Cycle Locators jump to the next/prev marker and the Playhead jumps to the Start of the Marker.
    Default KC are Control Command +Arrow Left/right
    Step 1: check you are using the correct key command :-)
    CCT

  • Command for silent installation of SCVMM Agent or adding Hyper-v Host to SCVMM

    Hello..
    I have to add my Hyper-V host using command to SCVMM without access to SCVMM Console.
    Plz provide me commands for that.

    Hi Richa,
    I tested in my lab to add a domain joined hyper-v host with following command:
    Add-SCVMHost -ComputerName serverlab-01 -VMMServer scvmm2012r2-01 -Credential (Get-SCRunAsAccount -Name "domainadmin" )
    The Runasaccount "domainadmin" is create via command "new-scrunasaccount" (during this command it will prompt to input the username and password in my case I added a domain admin account ):
    $credential = Get-Credential
    New-SCRunAsAccount -Credential $credential -Name "domainadmin"
    Actually (in most cases), you can use "view script" in the GUI or at the end of the wizard , this may help us to know which command was used :
    Best Regards,
    Elton Ji
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

  • PROMPT Command equivalent in Oracle 7

    Hi All,
    I am working on a database Health check script . I Have to implement this on a Oracle7 server running on OS HP-unix. I have done with this health check script on all the 9i servers. The same script i have to modify and implement in Oracle7 database also. To print Headings or titles in Oracle 9i i used PROMPT command. So which is the equivalent command that can be used in Oracle7. I want to print the headings. Kindly assist me.

    877920 wrote:
    Same error. Unable to login.
    SQL> connect / as sysdba
    ERROR: ORA-01017: invalid username/password; logon deniedAs far as I recall, sqlplus back then did not support this specific logon syntax. Qualify the connection string using username and password. e.g.
    sqlplus sys/mysecretpassword
    The sysdba role will likely not be enabled - but that should not be an issue for running a bunch SQL selects.
    Also reconsider using the sys schema for logging on. The only time this schema should be used is for actual database maintenance - like doing a shutdown, changing initialisation settings, doing an upgrade and so on.
    Using it as your personal superuser logon is not a good idea and one that you will be nailed for (and very hard) in any security review or audit.
    Rather create a new schema and grant it the minimal rights needed to do perform the required job.
    PS. Cannot recall if connect internal also worked in sqlplus back then - but that can be tried if you want a sysdba connection from sqlplus itself.

  • HT3597 commands for voice control

    Is there a list of commands for voice control?

    Yea, I have a friend who has noticed this issue on his Z10.
    I've tested on my Z30, and the voice feedback is loud and clear. We'll have to figure out the differenced in the devices or OS release, or settings.
    What is your Operating System loaded to your device? Look at Options >  From the main screen, swipe down from the top black bezel to Settings > About... what is the OS Version listed there?
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Voice command for Contacts doesn't work after a re...

    Voice command for Contacts doesn't work after a reboot or a contacts restore.
    Steps to reproduce:
    1. Backup contacts. Open Files > Backup & Restore > Select Contact for Backup Contents and select Back up now.
    2. Edit/save a contact, press and hold the call button, speak contacts name. The voice recognition works fine.
    3. Restore contacts. Open Files > Backup & Restore > Select Contact for Backup Contents and select Restore.
    4. Reboot phone when prompted.
    5. Press and hold the call button, speak contacts name. The voice recognition does not work.
    Work around:
    Edit and save each contact.
    Additional Information:
    Social integration with contacts also does not work after a reboot. The facebook icon and "See what xxx is up to on Facebook" is not displayed. The same work around "Edit and save each contact" also applies. This occurs using the Nokia N8 and Nokia 808 Pureview.

    Nancy2015 wrote:
    I have my phone paired with my car, I can do everything except it does not recognize any of my contact names. If I try say a contact name, it says "not recognized" but if I say the contacts phone number, the name pops up onthe display in my car.
    Has anyone had this issue, is there a setting I am missing in my phone?
    Hello, 
    This is not necessarily and issue with the phone. It could also be an issue with the car`s bluetooth software that is only limited to some functions like reading your contacts list, last calls, missed calls, etc. which is most likely the basic 2.0 version. 
    The Z30 has the 4.0 version that has a lot more communication capability but if the car`s bluetooth its a lower version, then you will not be able to take full advantage of it unless you upgrade the bluetooth software in your car. Call your dealer and inquire about the bluetooth software upgrade in your car   

  • Modifying "Prompt user for input"

    Hi, all.
    Is there any "Prompt user for input" VI where I can include enum or ring type inputs? If not, how can I modify the "Prompt user for input" VI to do that?
    Thanks,
    Francisco
    Solved!
    Go to Solution.

    Right click on the express VI and select 'Open Front Panel'. This will convert it to a regular VI that you can edit. Or, just create your own VI from scratch. Look at the shipping examples for 'pop-up's.

  • An extra prompt appears for Credentials Opening Office Document in Workspac

    Hi,
    Anybody have any knowledge about this issue? and how to solve these issue?
    *6959959* An extra prompt appears for Credentials Opening Office Document using Internet Explorer with Smartcut or from EPM Workspace.
    If a security agent with a cookie-based session management mechanism is used, opening Microsoft Office documents from Microsoft Internet Explorer sometimes another prompt for credentials is displayed. This occurs because Microsoft Office issues an HTTP OPTIONS request when attempting to open documents. This OPTIONS request does not contain the same session-related cookies as requests made from the browser, so the security provider issues the prompt for credentials. Please see http://support.microsoft.com/?scid=kb;en-us;838028 for details about how Microsoft Office and Microsoft Internet Explorer open documents.
    To resolve this issue, reconfigure the security provider by disabling authentication for OPTIONS requests.
    Thanks in Advance.

    Not sure if this is what you are describing or not, but please take a look at Document ID 1350828.1 (I have pasted the text below):
    Windows Security Login Window Appears When Exporting Financial Reporting (FR) Reports To Ppt/Doc Or Xls with Office 2010 and Windows 2008 [ID 1350828.1]
    Modified 02-MAY-2012 Type PROBLEM Status PUBLISHED
    In this Document
    Symptoms
    Changes
    Cause
    Solution
    References
    Applies to:
    Hyperion BI+ - Version 9.3.3.0.00 and later
    Information in this document applies to any platform.
    Symptoms
    Unable to export FR reports to Excel, Powerpoint or Word from Workspace.
    When exporting and selecting to open the file, a new "Windows Security" window appears with a login/password to the server Windows security
    "Connect to server.system.local"
    No matter what user enters, the window comes back and the file doesn't open.
    If the file is saved then it can be opened.
    Changes
    Office 2010 was installed.
    Cause
    The cause of this issue is unknown.
    This issue has been identified in unpublished Bug 11891558 - "WINDOWS SECURITY" LOGIN WINDOW EXPORTING FR REPORTS TO PPT/DOC OR XLS :IE8/WIN7
    Solution
    For versions prior to 11.1.2.0:
    Amend the web.xml file for FR with this syntax:
    <security-constraint>
    <web-resource-collection>
    <web-resource-name>Suppress OPTIONS,HEAD for Office</web-resource-name>
    <url-pattern>/hrget/*</url-pattern>
    <http-method>OPTIONS</http-method>
    <http-method>HEAD</http-method>
    </web-resource-collection>
    <auth-constraint/>
    </security-constraint>
    Restart the Financial Reporting Web Application service and then export the report(s) to Excel, Word or PPT.
    Note: File should be located under: Hyperion/deployments/Weblogic9/servers/Financial Reporting/Web Applications/hr/WEB-INF
    This has been fixed in Patch Set 11.1.1.3.519 for Oracle Hyperion Reporting and Analysis Financial Reporting (patch number 13024655)
    Beginning with version 11.1.2.0.00:
    Please apply the following steps to resolve:
    1. On the Financial Reporting server browse to the location:
    oraclehome\Middleware\EPMSystem11R1\products\financialreporting\InstallableApps
    2. Take a backup copy of the HReports.ear file.
    3. Rename the file to zip and extract the "hr.war".
    4. HReports.ear file contains hr.war, where inside this file in the "web-inf" folder there is the web.xml file.
    5. Edit the web.xml file with a text editor and add the same syntax as the earlier release, at the end before the very last line---></web-app>

Maybe you are looking for