Command for silent installation of SCVMM Agent or adding Hyper-v Host to SCVMM

Hello..
I have to add my Hyper-V host using command to SCVMM without access to SCVMM Console.
Plz provide me commands for that.

Hi Richa,
I tested in my lab to add a domain joined hyper-v host with following command:
Add-SCVMHost -ComputerName serverlab-01 -VMMServer scvmm2012r2-01 -Credential (Get-SCRunAsAccount -Name "domainadmin" )
The Runasaccount "domainadmin" is create via command "new-scrunasaccount" (during this command it will prompt to input the username and password in my case I added a domain admin account ):
$credential = Get-Credential
New-SCRunAsAccount -Credential $credential -Name "domainadmin"
Actually (in most cases), you can use "view script" in the GUI or at the end of the wizard , this may help us to know which command was used :
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

Similar Messages

Silent installation of Cloud agent 12c failed on a windows 2003 host

Hello All,
I've done multiple installations by silently installing the cloud agent 12c using a response file. However, the configuration portion failed on this one windows 2003 host.
Has anyone seen this? I've searched on metalink and see other problems like TZ, service already exists, incorrect PERL settings etc..but found nothing that helps so far.
In log file:
The action configuration is performing
The plug-in Agent Configuration Assistant is running
AgentConfiguration:agent configuration has been started
Validating OMS_HOST and EM_UPLOAD_PORT
Performing free port detection..
AgentConfiguration: Executing emctl deploy agent command...
AgentConfiguration:agent configuration finished with status = false
The plug-in Agent Configuration Assistant has failed its perform method
The action configuration has failed its perform method
In Agent Deploy log file:
value passed to dir splitC:/oracle/em/agent_inst
INFO: length of temp is2
INFO: Return value:C:
\/oracle/em/agent_inst
INFO: ** Agent Port Check completed successfully.**
INFO: ERROR: The
Management Agent configuration failed. The plug-in configuration for the oracle.sysman.oh
monitoring plug-in may have failed, or this plug-in may not be present in the Management Agent
software. Ensure that the Management Agent software has the oracle.sysman.oh monitoring plug-in,
if not then retry the operation. If the agent software has the oracle.sysman.oh monitoring plug-
in, view the plug-in deployment log C:\oracle\em\agent_inst\install\logs to check if the plug-in
configuration for the oracle.sysman.oh monitoring plug-in failed.
INFO:
INFO: perform - mode
finished for action: configure
INFO:
INFO: You can see the log file: C:\oracle\em\core
\12.1.0.3.0\cfgtoollogs\oui\configActions2013-12-23_11-07-08-AM.log
INFO:
INFO: C:\oracle\em>exit
/b 3
INFO: Plugin homes:
INFO: Plugin homes:
INFO: C:\oracle\em\core\12.1.0.3.0\oui\bin
\runConfig.bat ORACLE_HOME=C:\oracle\em\core\12.1.0.3.0 RESPONSE_FILE=C:\oracle\em\core
\12.1.0.3.0\agent.rsp ACTION=configure MODE=perform COMPONENT_XML=
{oracle.sysman.top.agent.11_1_0_1_0.xml} RERUN=true completed with status=3
SEVERE: ERROR: Agent
Configuration Failed
SEVERE: ERROR: Agent Deployment Failed

Thanks for the reply Rahul.
I've used that same response file for deployments on other servers without any problem.
See response file below: (note i've changed the server name)
## copyright (c) 1999, 2012 Oracle. All rights reserved.          ##
## Specify values for the variables listed below to customize     ##
## your installation.                                             ##
## Each variable is associated with a comment. The comment        ##
## identifies the variable type.                                  ##
## Please specify the values in the following format:             ##
##         Type         Example                                   ##
##         String       "Sample Value"                            ##
##         Boolean      True or False                             ##
##         Number       1000                                      ##
##         StringList   {"String value 1","String Value 2"}       ##
## The values that are given as <Value Required> need to be       ##
## specified for a silent installation to be successful.          ##
## This response file is generated by Oracle Software             ##
## Packager.                                                      ##
RESPONSEFILE_VERSION=2.2.1.0.0
#OMS_HOST:<String> OMS host info required to connect to OMS
#EM_UPLOAD_PORT:<String> OMS port info required to connect to OMS
#AGENT_REGISTRATION_PASSWORD:<String> Agent Registration Password needed to
#     establish a secure connection to the OMS.
#AGENT_INSTANCE_HOME:<String> Agent instance home is the location of agent state directory.
#AGENT_PORT:<String> Agent port on which the agent process should be started.
#b_startAgent:<boolean> Agent will not be started after configuration if the value specified is false.
#ORACLE_HOSTNAME:<String> Fully qualified domain name of host where is the agent is deployed.
#s_agentHomeName:<String>Customized Oracle home name for the agent home. Example: s_agentHomeName="agent12gR1"
OMS_HOST="omshost.company.com"
EM_UPLOAD_PORT="1159"
AGENT_REGISTRATION_PASSWORD="complicatedpassword"
AGENT_INSTANCE_HOME="e:/oracle/em/agent_inst"
AGENT_PORT="3872"
b_startAgent=true
ORACLE_HOSTNAME="targetserver.company.com"
#s_agentHomeName=<Value Unspecified>
#s_agentSrvcName:<String> Sets the agent Service Name and this variable can be
#      used to overrite the agent service name calculated by the install. This is
#      required for only Windows.
#      Example:
#      s_agentSrvcName = "GridAgent"            ; User specified value
#s_agentSrvcName=""
#Please Don't change the values of these variables
#EM_INSTALL_TYPE:<STRING> install type
EM_INSTALL_TYPE="AGENT"

Commands for silent install for oajinit13129.exe

I'm writing a script to install oajinit13129.exe and I was wondering what the command/s are for installing the update silently, or invisibly for the user? I'm guessing it's a b1 command, pre-installation batch, but can't be sure.
Thanks for any help you can offer,
Carl W

Here are the steps needed to do silent installation:
1) Unistall Jinitiator
2) Make cmd file for example (install.cmd) containing the following line:
jinit13121.exe -s -a -s
Note: You have to write the full path of the exe file of jinit
This will install the jinitiator in silent mode in the directory
C:\Program Files\Oracle\JInitiator 1.3.x.x
3) Finally Execute (Install.cmd) and it will install Jinitiator in Silent mode

Can't change default installation directory for silent installation of Flash Builder 4.5

Hello,
I'm trying to create a custom installation script for Flash Builder 4.5 in silent mode.
I have created a flash builder msi installer using "Adobe Application Manager Enterprise Edition".
I would like to change the default installation directory during silent installation.
Could you please help ?
Thank you in advance.
Best regards,
Ryad

The install.xml in the "Adobe Flash Builder 4.5 Installer/deploy" folder will have the INSTALLDIR property. You can change this property to your custom location.
<?xml version="1.0" encoding="UTF-8"?>
<Deployment>
<Properties>

<Property name="INSTALLDIR">C:\Program Files\Adobe</Property>
</Properties>
<Payloads>
</Payloads>
</Deployment>
Thanks
Unni G S

Windows command for Patch installation

Hi!
We are having some difficulty understanding the Windows command for installing a patch.
We read the readme, but cannot quite follow. Can someone please provide this command?
Version: Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - Production
Thanks!

PavanG wrote:
You can use the below command to apply the patch.
opatch apply
You will need to run this command from the patch folder after setting the Oracle Home and Oracle Sid.There are other options to opatch - such as napply. Better to find out what the OP is having difficulty with before throwing out a one-size-fits-all solution.

Advanced options for silent installation? (both 6.1 and 7.0)

Hi all!
Looking at on-line docs, silent installation has a very limited set of parameters
in installer.properties (6.1) and silent.xml (7.0). Are there more options available?
If so, where do I get a complete list?
Any help is appreciated!
Thanks,
Leo

SAP Note 1118779 helpded

Command line for silent installation firefox 10.0.2

I have to deploy custom firefox 10.0.2 on workstations with limited rights.
I need the commands to create a custom package

Hi martian,
Have you looked at the [[Username and password not remembered]] Knowledge Base article? It sounds like this is spot on for the issue you describe. There is a lot of useful information in the article.
Hopefully this helps!

Command for silently uninstall Adobe Muse

hi
Per subject, I need some help about uninstall Adobe Muse 6.0.
I would like to deploy adobe muse from SCCM.
Programs for installation have been done, tested.
And I would like to create programs for uninstall Adobe Muse completely and silently.
Here is the uninstall sequence:
1. MsiExec.exe /x {C935F091-75FD-752B-B19D-6AAE0D24B05B} /qb!
2. "C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\core\PDApp.exe" --appletID="DWA_UI" --appletVersion="2.0" --mode="Uninstall" --mediaSignature="{9A554C9D-E12D-4205-8101-9F4337CD5673}"
3. Remove folder "Program" in C root.
The issue is, see picture below
This window will pop up when executing command in sequence 2.
I would like to make it silent (it can be completely silent or the effect can be the same/similar like using "/qb!" in msiexec command), so that user do not need to manually do it.
I've searched a lot in the internet and also tried all I know but none of them works.
Any suggestions would be appreciated.
Thanks.

Creative Cloud Help / Sign out, Sign in | Creative Cloud desktop app
http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
Creative Cloud Help / Install, update, or uninstall apps
http://helpx.adobe.com/creative-cloud/help/install-apps.html
Installing Creative Cloud Apps
http://tv.adobe.com/watch/cs6-creative-cloud-feature-tour-for-video/installing-desktop-app s-from-creative-cloud/

Command Line Parameters for Silent Install with Status for BI4.0 Products

For the XI3.1 product installations, which clearly leveraged MSIEXEC installation files, it was possible to use the /qb+ command line parameter to trigger a silent install which showed the progress of the installation with a final prompt to acknowledge the completion of the installation.
For the new BI4.0 installation package, it's not clear how to trigger a silent installation which also shows the installation progress. The installation guide describes using -q in the command line to run a silent installation, or leveraging a response.ini file to trigger a silent install, but in neither case does it show how to modify the silent installation command to enable a display of the installation progress.
Does anyone know the syntax, either command line or embedded in a response.ini file, to trigger a silent installation for the BI4.0 products which ALSO shows the progress of the installations?
Thanks,
Josh

Yes, I've tried the same switch that I used for the XI3.1 installations, namely "/qb". In XI3.1 I was able to use this switch either directly in the MSIEXEC command line or in the Response.ini file as "QUIET=/qb". In either case, this switch resulted in a silent install that showed a progress bar window for the installation, completing with a confirmation prompt indicating that the installation had completed.
Neither approach works with the BI4.0 installation packages. My suspicion is that SAP has switched to a different installation engine as I can't find the typical .msi installation files that would indicate this is a MSIEXEC installation. I'm hoping someone knows what type of installation engine is being used and what the switching syntax is for silent installs. But it can't be a completely transparent silent install (I know how to do this); it must provide an option to show an installation progress bar.
Thanks,
Josh

Error in Silent Installation of Oracle Database 10g R2

Hi All,
I want to install oracle DB10gR2 through silent installation(through command) and got the following error druing the prerequesties checks...
Anyone can pl. let me know how to ignore tis error or continue with this installation as we normally do in GUI instllation.
chk d below log for silent installation ...
=================================================================
Performing check for Kernel
Checking kernel parameters
Checking for semmsl=250; found semmsl=250. Passed
Checking for semmns=32000; found semmns=32000. Passed
Checking for semopm=100; found semopm=32. Failed <<<<
Checking for semmni=128; found semmni=128. Passed
Checking for shmmax=536870912; found shmmax=33554432. Failed <<<<
Checking for shmmni=4096; found shmmni=4096. Passed
Checking for shmall=2097152; found shmall=2097152. Passed
Checking for file-max=65536; found file-max=52371. Failed <<<<
Checking for VERSION=2.4.21; found VERSION=2.4.21-4.ELsmp. Passed
Checking for ip_local_port_range=1024 - 65000; found ip_local_port_range=32768 - 61000. Failed <<<<
Checking for rmem_default=262144; found rmem_default=65535. Failed <<<<
Checking for rmem_max=262144; found rmem_max=65535. Failed <<<<
Checking for wmem_default=262144; found wmem_default=65535. Failed <<<<
Checking for wmem_max=262144; found wmem_max=65535. Failed <<<<
Check complete. The overall result of this check is: Failed <<<<
Check complete: Failed <<<<
Problem: The kernel parameters do not meet the minimum requirements (see above).
Recommendation: Perform operating system specific instructions to update the kernel parameters.
=======================================================================
Performing check for GLIBC
Checking Recommended glibc version
Expected result: ATLEAST=2.3.2-95.27
Actual Result: 2.3.2-95.3
Check complete. The overall result of this check is: Failed <<<<
Performing check for TotalMemory
===============================================================
Checking physical memory requirements ...
Expected result: 922MB
Actual Result: 496MB
Check complete. The overall result of this check is: Failed <<<<
Check complete: Failed <<<<
Problem: The system does not have sufficient physical memory to perform the install.
Recommendation: Increase the amount of physical memory available to your system before continuing with the installation.
===============================================================

Hi Pierre,
thats fine that I should nt contuinue the installation if the prerequisties isnt match
but my question is "if we are doing the same installation in GUI based then we have to select that failed components and verify it again, i.e. I select that failed component and retry it (that the same thing done by me) and its working perfectly..." and my installation is successfully completed with any errors.
So, how can I do the same thing through command line, IF I want to retry for the failed components?
FYI ...Log for kernel parameters, RPM and Memory...
==========================================================
Performing check for Kernel
Checking kernel parameters
Checking for semmsl=250; found semmsl=250. Passed
Checking for semmns=32000; found semmns=32000. Passed
Checking for semopm=100; found semopm=100. Passed
Checking for semmni=128; found semmni=128. Passed
Checking for shmmax=536870912; found shmmax=536870912. Passed
Checking for shmmni=4096; found shmmni=4096. Passed
Checking for shmall=2097152; found shmall=2097152. Passed
Checking for file-max=65536; found file-max=65536. Passed
Checking for VERSION=2.4.21; found VERSION=2.4.21-4.ELsmp. Passed
Checking for ip_local_port_range=1024 - 65000; found ip_local_port_range=1024 - 65000. Passed
Checking for rmem_default=262144; found rmem_default=262144. Passed
Checking for rmem_max=262144; found rmem_max=262144. Passed
Checking for wmem_default=262144; found wmem_default=262144. Passed
Checking for wmem_max=262144; found wmem_max=262144. Passed
Check complete. The overall result of this check is: Passed
Check complete: Passed
=====================================================
2) also the GLIBC is already higher version with me..then why it shown me as fail
Performing check for GLIBC
Checking Recommended glibc version
Expected result: ATLEAST=2.3.2-95.27
Actual Result: 2.3.2-95.3
Check complete. The overall result of this check is: Failed <<<<
=====================================================
3) Memory error
Performing check for TotalMemory
Checking physical memory requirements ...
Expected result: 922MB
Actual Result: 496MB
Check complete. The overall result of this check is: Failed <<<<

Oracle 10g db Silent installation error

Hi All,
I am getting this error while going for silent installation :
SEVERE:Values for the following variables could not be obtained from the command line or response file(s):
DEP_MODE(InstallType),
TLDepModes(TopLevelInstallType)
Here is response file and execution summary :
=============================================================
$ ./runInstaller -silent -responseFile /dumps/oracle4linux/dvd/database/responsevenf
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2008-11-14_03-07-37AM. Please wait ...[oracle@hrmodev database]$ Oracle Universal Installer, Version 10.2.0.1.0 Production
Copyright (C) 1999, 2005, Oracle. All rights reserved.
You can find a log of this install session at:
/arch/ptchdb/db/tech_st/10.2.0/admin/oui/PTCH_hrmodev/oraInventory/logs/installActions2008-11-14_03-07-37AM.log
.................................................................................................... 100% Done.
SEVERE:Values for the following variables could not be obtained from the command line or response file(s):
DEP_MODE(InstallType),
TLDepModes(TopLevelInstallType)
Silent install cannot continue.
=============================================================
Here is my response file :
[General]
RESPONSEFILE_VERSION=1.0.0.0.0
[Session]
#This entry is not used on Windows platforms
#UNIX_GROUP_NAME;String;Used in Dialog
#Group that the current user is part of, for ownership of the install files.
UNIX_GROUP_NAME="dba"
#FROM_LOCATION;String;Used in Dialog
#Full path for the products.jar file.
#Replace the X: with the drive letter of your CD-ROM device.
FROM_LOCATION="/dumps/oracle4linux/dvd/database/stage/products.xml"
#FROM_LOCATION_CD_LABEL;String:Used in multi-CD installations.
#It includes the label of the Compact Disk where the file "products.jar" exists.
#The label can be found in the file "disk.label" in the same directory as
#"products.jar".
#ORACLE_HOME;String;Used in Dialog
#Enter the path to your oracle home. Replace the drive letter and optionally
#alter the home path.
ORACLE_HOME="/visapp/venforth/app/oracle/"
#ORACLE_HOME_NAME;String;Used in Dialog
#Enter the name of this oracle home. The name will be used to identify this
#home.
ORACLE_HOME_NAME="VENF"
#TOPLEVEL_COMPONENT;StringList;Used in Dialog
#Choices: "oracle.server", "8.1.5.0.0"
#TOPLEVEL_COMPONENT={"oracle.server", "8.1.5.0.0"}
#TOPLEVEL_COMPONENT={"oracle.rdbms","9.2.0.4.0"}
TOPLEVEL_COMPONENT={"oracle.swd","2.2.1.2.0"}
#SHOW_COMPONENT_LOCATIONS_PAGE;Boolean;Used in Dialog
#Some components are flexible in where they are installed, although all have
# default locations. Set this to FALSE if you want to accept the default locations
# and not show this page.
SHOW_COMPONENT_LOCATIONS_PAGE=false
#SHOW_SUMMARY_PAGE;Boolean;Used in Dialog <---------------
#MUST be <false> for "silent" install
SHOW_SUMMARY_PAGE=false
#SHOW_INSTALL_PROGRESS_PAGE;Boolean;Used in Dialog <---------------
#MUST be <false> for "silent" install
SHOW_INSTALL_PROGRESS_PAGE=false
#SHOW_REQUIRED_CONFIG_TOOL_PAGE;Boolean;Used in Dialog
SHOW_REQUIRED_CONFIG_TOOL_PAGE=false
#SHOW_OPTIONAL_CONFIG_TOOL_PAGE;Boolean;Used in Dialog
SHOW_OPTIONAL_CONFIG_TOOL_PAGE=false
#SHOW_END_SESSION_PAGE;Boolean;Used in Dialog <---------------
#MUST be <false> for "silent" install
SHOW_END_SESSION_PAGE=false
#Parameter : LOCATION_FOR_DISK2
#Type : String
#Description : Complete path to the other disks.
#Example : LOCATION_FOR_DISK2 = "..\..\Disk2"
#LOCATION_FOR_DISK2="F:\teststage\cd\Disk3"
#Parameter : NEXT_SESSION
#Type : Boolean
#Description : Set to true if the installer needs to go to the File Locations page for another installation.
#Example : NEXT_SESSION = true
NEXT_SESSION=false
#Parameter : SHOW_SPLASH_SCREEN
#Type : Boolean
#Description : Set to true if the initial splash screen in the installer needs to be shown.
#Example : SHOW_SPLASH_SCREEN = true
SHOW_SPLASH_SCREEN=false
#Parameter : SHOW_WELCOME_PAGE
#Type : Boolean
#Description : Set to true if the Welcome page in the installer needs to
be shown.
#Example : SHOW_WELCOME_PAGE = false
SHOW_WELCOME_PAGE=false
#Parameter : SHOW_ROOTSH_CONFIRMATION
#Type : Boolean
#Description : Set to true if the Confirmation dialog asking to run the root.sh script in the installer needs to be shown.
#Valid only in Unix platforms.
#Example : SHOW_ROOTSH_CONFIRMATION = true
SHOW_ROOTSH_CONFIRMATION=false
#Parameter : SHOW_EXIT_CONFIRMATION
#Type : Boolean
#Description : Set to true if the confirmation when exiting the installer needs to be shown.
#Example : SHOW_EXIT_CONFIRMATION = true
SHOW_EXIT_CONFIRMATION=false
[oracle.server_8.1.5.0.0]
#INSTALL_TYPE;String;Used in Dialog
# Minimal - Optional pre-configured DB (b_createDB), Networking services, Server utilities
# Typical - Pre-configured starter DB, Licensable options and Cartridges,
# Networking services, Server utilities
INSTALL_TYPE="Typical"
DEP_MODE = Custom
TLDepModes = Custom
[oracle.rdbms_8.1.5.0.0]
#OPTIONAL_CONFIG_TOOLS;StringList
#OPTIONAL_CONFIG_TOOLS={"dbassist"} OR OPTIONAL_CONFIG_TOOLS={"Oracle Database Configuration Assistant"}
#s_GlobalDBName;String;Used in Dialog
#This is the name of the database which will be created as part of the typical install.
#You should modify this string to use an appropriate name.
s_GlobalDBName="VENF"
#This entry not needed for Windows installation.
#s_mountPoint;String;Used in Dialog
#Database file location: directory for datafiles, control files, redo logs
#s_mountPoint="/visapp/venforth/oradata/"
#s_dbSid;String;Used in Dialog
#Value for ORACLE_SID. Change this to an appropriate SID.
s_dbSid="VENF"
#b_createDB;Boolean
#Relevant only in MINIMAL, set to TRUE if you want a starter database, set to FALSE if not.
b_createDB=true
Edited by: Kishore KVR on Nov 14, 2008 2:56 PM

Hi,
Have you checked for any errors in log file....????
Can you connect via SQL*PLUS ... , for example...????
Regards,
Simon

NM7.1: Regarding Software Package Silent Installation Issue

Dear Experts,
I am working on NM7.1, & I tried of creating a Software Package which will include MI client installation, JRE, MaxDB, MCD all in one. For this I zipped MaxDB folder which I downloaded from SMP & uploaded it to NWA, created a software package from NWA 7.1, downloaded it & tried installing it. It executed properly.
Now I wish to create a Software Package which can be installed in Silent mode.
For this, I went through NM71 help documentation & maintained JRE components Silent Command Line Parameter field value as - /qn ADDLOCAL=ALL IEXPLORER=1 INSTALLDIR=<Drive:>\java\jre.
Other components like MaxDB doesn't allow to maintain this parameter field value in NWA, neither MCD nor SETUP_WIN32.
So I downloaded this Software package & clicked on MassDeviceSetup_Silent.bat file for silent installation.
It started of & installed JRE but later it didn't proceeded further. I kept it running for almost 2 days, but then too nothing happened further.
I have attached the StandardMDSLog file at below link for your reference, please analyze it.
http://www.4shared.com/file/258992320/317aef7c/StandardMDSLog.html
I feel that I am missing something.
Please guide me further....
Thanks in advance.
Regards,
Saptak

Hi Stephan,
Thank you very much for your notes.
This issue has already been fixed in AccAD 2.2.
Best regards,
Yael

Grid Control 10.2.0.1.1 Silent Installation Problem

I seem to be having issue installing Grid Control 10.2.0.1.1; I am using the silent install with existing database method and for some reason, the installation process is not using some variable I have specified in the response file.
My operating environment is as follows
Redhat Enterprise Linux 5.2 [Tikanga] - 32bit
Repository: Oracle Database 11gR2Variables that I have specifed in the response file and are not being used are below.
>
s_mgmtTbsName="/u02/oradata/emrep/oradata/mgmt.dbf"
s_ecmTbsName="/u02/oradata/emrep/oradata/mgmt_ecm_depot1.dbf"
>
slientInstall log has the following entries
silentInstall2010-08-18_01-15-29-PM.log
*** Error Dialog: OUI-10150:Error: The file system location /u01/app/oracle/product/oms10g/oradata does not exist. Please enter the path of an existing directory. in component Oracle Enterprise Manager Grid Console 10.2.0.1.1 . Installation cannot continue for this component. ***
User Selected: S&top installation of this component only.
The file system location /u01/app/oracle/product/oms10g/oradata does not exist. Please enter the path of an existing directory.
This silent installation was unsuccessful.installActions log file has the following entries
INFO: Setting variable 's_mgmtTbsName' to '/u01/app/oracle/product/oms10g/oradata/mgmt.dbf'. Received the value from the variable calculation.
INFO: Calling Query fileQueries10.1.0.3.0 exists
filename = /u01/app/oracle/product/oms10g/oradata
INFO: Query Returned: false
User Selected: S&top installation of this component only.
The file system location /u01/app/oracle/product/oms10g/oradata does not exist. Please enter the path of an existing directory.
This silent installation was unsuccessful.Regard,
Phiri

[oracle@oracledba Disk1]$ cat response/em_using_existing_db.rsp
## copyright (c) 1999, 2004 Oracle. All rights reserved.          ##
## Specify values for the variables listed below to customize     ##
## your installation.                                             ##
## Each variable is associated with a comment. The comment        ##
## identifies the variable type.                                  ##
## Please specify the values in the following format:             ##
##         Type         Example                                   ##
##         String       "Sample Value"                            ##
##         Boolean      True or False                             ##
##         Number       1000                                      ##
##         StringList   {"String value 1","String Value 2"}       ##
## The values that are given as <Value Required> need to be       ##
## specified for a silent installation to be successful.          ##
## This response file is generated by Oracle Software             ##
## Packager.                                                      ##
RESPONSEFILE_VERSION=2.2.1.0.0
#Name       : UNIX_GROUP_NAME
#Datatype   : String
#Description: Unix group to be set for the inventory directory. Valid only in Unix platforms.
#Example: UNIX_GROUP_NAME = "install"
UNIX_GROUP_NAME="oinstall"
#Name       : FROM_LOCATION
#Datatype   : String
#Description: Complete path to the products.xml.
#Example: FROM_LOCATION = "../stage/products.xml"
FROM_LOCATION="/u02/orasoft/gc_10201/Disk1/rdbms/Disk1/stage/products.xml"
#Name       : FROM_LOCATION_CD_LABEL
#Datatype   : String
#Description: This variable should only be used in multi-CD installations. It includes the label of the compact disk where the file "products.xml" exists. The label can be found in the file "disk.label" in the same directory as products.xml.
#Example: FROM_LOCATION_CD_LABEL = "CD Label"
#FROM_LOCATION_CD_LABEL="EM10g"
#Name       : BASEDIR
#Datatype   : String
#Description: Directory where the ORACLE_HOMES gets created
#Example: BASEDIR = "C:\OHOME1" or BASEDIR = "/scratch/OracleHomes"
BASEDIR="/u01/app/oracle/product"
#Name       : INSTALLATION_NAME
#Datatype   : String
#Description: Oracle Home Name. Used in creating folders and services.
#Example: INSTALLATION_NAME = "OHOME1"
INSTALLATION_NAME="oms10g"
#Name       : NEXT_SESSION
#Datatype   : Boolean
#Description: Set to true to allow users to go back to the File Locations page for another installation. This flag also needs to be set to true in order to process another response file (see NEXT_SESSION_RESPONSE).
#Example: NEXT_SESSION = true
NEXT_SESSION=true
#Name       : NEXT_SESSION_ON_FAIL
#Datatype   : Boolean
#Description: Set to true to allow users to invoke another session even if current install session has failed. This flag is only relevant if NEXT_SESSION is set to true.
#Example: NEXT_SESSION_ON_FAIL = true
NEXT_SESSION_ON_FAIL=true
#Name       : DEINSTALL_LIST
#Datatype   : StringList
#Description: List of components to be deinstalled during a deinstall session.
#The following choices are available. The value should contain only one of these choices.
#The choices are of the form Internal Name, Version : External name. Please use the internal name and version while specifying the value.
#    oracle.sysman.top.agent, 10.2.0.0.0 : Oracle Management Agent 10.2.0.0.0
#    oracle.sysman.top.em_seed, 10.2.0.0.0 : Oracle Enterprise Manager Repository Database 10.2.0.0.0
#    oracle.sysman.top.oms, 10.2.0.0.0 : Oracle Enterprise Manager Grid Console 10.2.0.0.0
#Example: DEINSTALL_LIST = {"oracle.sysman.top.agent","10.2.0.0.0"}
DEINSTALL_LIST={"oracle.sysman.top.oms","10.2.0.1.1"}
#Name       : SHOW_DEINSTALL_CONFIRMATION
#Datatype   : Boolean
#Description: Set to true if deinstall confimation is needed during a deinstall session.
#Example: SHOW_DEINSTALL_CONFIRMATION = true
SHOW_DEINSTALL_CONFIRMATION=true
#Name       : SHOW_DEINSTALL_PROGRESS
#Datatype   : Boolean
#Description: Set to true if deinstall progress is needed during a deinstall session.
#Example: SHOW_DEINSTALL_PROGRESS = true
SHOW_DEINSTALL_PROGRESS=true
#Name       : REMOVE_HOMES
#Datatype   : StringList
#Description: List of the homes to be removed during a deinstall session. Each home is represented by its full path.
#Example: REMOVE_HOMES = {<full_path_of_home1>,<full_path_of_home2>, ...}
REMOVE_HOMES=<Value Unspecified>
#Name       : ACCEPT_LICENSE_AGREEMENT
#Datatype   : Boolean
#Description: By setting this variable to true, you are accepting the license agreement. This variable is used only for silent installations.
#Example: ACCEPT_LICENSE_AGREEMENT = true
ACCEPT_LICENSE_AGREEMENT=true
#Name       : TOPLEVEL_COMPONENT
#Datatype   : StringList
#Description: The top level component to be installed in the current session.
#The following choices are available. The value should contain only one of these choices.
#The choices are of the form Internal Name, Version : External name. Please use the internal name and version while specifying the value.
#    oracle.sysman.top.agent, 10.2.0.0.0 : Oracle Management Agent 10.2.0.0.0
#    oracle.sysman.top.em_seed, 10.2.0.0.0 : Oracle Enterprise Manager Repository Database 10.2.0.0.0
#    oracle.sysman.top.oms, 10.2.0.0.0 : Oracle Enterprise Manager Grid Console 10.2.0.0.0
#Example: TOPLEVEL_COMPONENT = {"oracle.sysman.top.agent","10.2.0.0.0"}
TOPLEVEL_COMPONENT={"oracle.sysman.top.oms","10.2.0.1.1"}
#Name       : SELECTED_LANGUAGES
#Datatype   : StringList
#Description: Languages in which the components will be installed.
#The following choices are available. The value should contain only one of these choices.
#The choices are of the form Internal Name : External name. Please use the internal name while specifying the value.
#    en,   : English
#    de,   : German
#    es,   : Latin American Spanish
#    es_MX,   : Mexican Spanish
#    es_ES,   : Spanish
#    fr,   : French
#    fr_CA,   : Canadian French
#    it,   : Italian
#    iw,   : Hebrew
#    ja,   : Japanese
#    ko,   : Korean
#    pt_BR,   : Brazilian Portuguese
#    zh_CN,   : Simplified Chinese
#    zh_TW,   : Traditional Chinese
#Example: SELECTED_LANGUAGES = {"en"}
#SELECTED_LANGUAGES={"en"}
#Name       : COMPONENT_LANGUAGES
#Datatype   : StringList
#Description: Languages in which the components will be installed.
#The following choices are available. The value should contain only one of these choices.
#The choices are of the form Internal Name : External name. Please use the internal name while specifying the value.
#    en,   : English
#    de,   : German
#    es,   : Latin American Spanish
#    es_MX,   : Mexican Spanish
#    es_ES,   : Spanish
#    fr,   : French
#    fr_CA,   : Canadian French
#    it,   : Italian
#    iw,   : Hebrew
#    ja,   : Japanese
#    ko,   : Korean
#    pt_BR,   : Brazilian Portuguese
#    zh_CN,   : Simplified Chinese
#    zh_TW,   : Traditional Chinese
#Example: COMPONENT_LANGUAGES = {"en"}
#Component : oracle.sysman.top.oms
COMPONENT_LANGUAGES={"en"}
#Name       : s_reposHost
#Datatype   : String
#Description: Hostname of the Repository database
#Component : oracle.sysman.top.oms
#Example    :s_reposHost="stadv26.us.oracle.com"
s_reposHost="oracledba"
#Name       : s_reposPort
#Datatype   : String
#Description: Port on which the Repository database is running
#Component : oracle.sysman.top.oms
#Example    :s_reposPort="1521"
s_reposPort="1521"
#Name       : s_reposSID
#Datatype   : String
#Description: SID or Service name of the Repository database
#Component : oracle.sysman.top.oms
#Example    :s_reposSID="emrep"
s_reposSID="emrep"
#Name       : s_reposDBAPwd
#Datatype   : String
#Description: Password of DBA user used to create repository schema
#Component : oracle.sysman.top.oms
# Example   : s_reposDBAPwd="password"
s_reposDBAPwd="emgc10g"
#Name       : s_mgmtTbsName
#Datatype   : String
#Description: Mgmt tablespace name
#Component : oracle.sysman.top.oms
#This will get created on the machine where the database is present
#So make sure that the directory given here is present in the machine where the database exists
#ORACLE_HOME/oradata/mgmt.dbf
#Example   : s_mgmtTbsName=/scratch/OracleHomes/oradata/mgmt.dbf
s_mgmtTbsName="/u02/oradata/emrep/oradata/mgmt.dbf"
#Name       : s_ecmTbsName
#Datatype   : String
#Description: ECM tablespace name
#Component : oracle.sysman.top.oms
#This will get created on the machine where the database is present
#So make sure that the directory given here is present in the machine where the database exists
#ORACLE_HOME/oradata/mgmt_ecm_depot1.dbf
#Example    : s_ecmTbsName=/scratch/OracleHomes/oradata/mgmt_ecm_depot1.dbf
s_ecmTbsName="/u02/oradata/emrep/oradata/mgmt_ecm_depot1.dbf"
#Name       : b_emailSelected
#Datatype   : Boolean
#Description: Whether to receive automatic threshold notification email
#Component : oracle.sysman.top.oms
#Example    : b_emailSelected=false/true
b_emailSelected=<Value Unspecified>
#Name       : s_emailAddress
#Datatype   : String
#Description: Address to receive threshold notification email, this will be effected only when b_emailSelected=true
#Component : oracle.sysman.top.em_seed
s_emailAddress=<Value Unspecified>
#Name       : s_emailServer
#Datatype   : String
#Description: SMTP gateway used to send threshold notification email, this will be effected only when b_emailSelected=true
#Component : oracle.sysman.top.em_seed
s_emailServer=<Value Unspecified>
#Name       : b_metalinkSelected
#Datatype   : Boolean
#Description: Whether MetaLink connection was configured
#Component : oracle.sysman.top.em_seed
#Example    : b_metalinkSelected=false/true
b_metalinkSelected=<Value Unspecified>
#Name       : s_metalinkUser
#Datatype   : String
#Description: user name for MetaLink access, this will be effected only when b_metalinkSelected=true
#Component : oracle.sysman.top.em_seed
s_metalinkUser=<Value Unspecified>
#Name       : s_metalinkPassword
#Datatype   : String
#Description: password for MetaLink access, this will be effected only when b_metalinkSelected=true
#Component : oracle.sysman.top.em_seed
s_metalinkPassword=<Value Unspecified>
#Name       : b_proxySelected
#Datatype   : Boolean
#Description: Whether proxy connection was configured
#Component : oracle.sysman.top.em_seed
#Example: b_proxySelected=false/true
b_proxySelected=<Value Unspecified>
#Name       : EM_PROXYUSER
#Datatype   : String
#Description: User name for proxy access,this will be effected only when b_proxySelected=true
#Component : oracle.sysman.top.em_seed
EM_PROXYUSER=<Value Unspecified>
#Name       : EM_PROXYREALM
#Datatype   : String
#Description: Server providing proxy access, this will be effected only when b_proxySelected=true
#Component : oracle.sysman.top.em_seed
EM_PROXYREALM=<Value Unspecified>
#Name       : EM_PROXYPASSWORD
#Datatype   : String
#Description: Password for proxy access, this will be effected only when b_proxySelected=true
#Component : oracle.sysman.top.em_seed
EM_PROXYPASSWORD=<Value Unspecified>
#Name       : EM_PROXYHOST
#Datatype   : String
#Description: Server providing proxy access, this will be effected only when b_proxySelected=true
#Component : oracle.sysman.top.em_seed
EM_PROXYHOST=<Value Unspecified>
#Name       : EM_DONTPROXYFOR
#Datatype   : String
#Description: Domains which should not use proxy access, this will be effected only when b_proxySelected=true
#Component : oracle.sysman.top.em_seed
EM_DONTPROXYFOR=<Value Unspecified>
#Name       : EM_PROXYPORT
#Datatype   : String
#Description: Port for proxy access, this will be effected only when b_proxySelected=true
#Component : oracle.sysman.top.em_seed
EM_PROXYPORT=<Value Unspecified>
#Name       : s_securePassword
#Datatype   : String
#Description: Password for secure communication with Management Server
#Component : oracle.sysman.top.oms
#Example    : s_securePassword="password"
s_securePassword="emgc10g"
#Name       : s_securePasswordConfirm
#Datatype   : String
#Description: Confirmation of password for secure communication with Management Server
#Component : oracle.sysman.top.oms
#Example    : s_securePasswordConfirm="password"
s_securePasswordConfirm="emgc10g"
#Name       : b_lockedSelected
#Datatype   : Boolean
#Description: Whether agent communication should be locked
#Component : oracle.sysman.top.oms
#Example    : b_lockedSelected=true/false
b_lockedSelected=false
#Name       : s_reposPwd
#Datatype   : String
#Description: Password of repository schema owner
#Component : oracle.sysman.top.oms
#Example    : s_reposPwd="password"
s_reposPwd="emgc10g"
#Name       : s_reposPwdConfirm
#Datatype   : String
#Description: Password for repository schema owner
#Component : oracle.sysman.top.oms
#Example    : s_reposPwdConfirm="password"
s_reposPwdConfirm="emgc10g"
#Please Don't change the values of these variables
n_firstInstanceValidation=2
n_firstReposValidation=1
n_firstReposPwdValidation=2
n_firstSecureValidation=2
n_firstVldnEmailSer=2
#Name       : b_upgrade
#Datatype   : Boolean
#Description: To Specify whether it is Normal Install or Upgrade
#Component : oracle.sysman.top.oms
#PLEASE DON'T CHANGE THIS VALUE
b_upgrade=false
#Name       : b_showOptConfigPage
#Datatype   : Boolean
#Description: whether to perform optional configuration
#Component : oracle.sysman.top.oms
#PLEASE DON'T CHANGE THIS VALUE
b_showOptConfigPage=TRUE
#Name       : s_installType
#Datatype   : String
#Description: Type of Grid Control install being performed
#Component : oracle.sysman.top.oms
#PLEASE DON'T CHANGE THIS VALUE
s_installType="NOSEED"
[oracle@oracledba Disk1]$

Oracle 9.2.0.1 Standard Edition Silent Installation using Response file

Does Oracle 9i Standard Edition come in 3 CDs??. I heard problems about providing response files to silent install Oracle 9.2.0.1 server.
I am about receive a licensed copy of Oracle 9i and I am looking at creating a response file for silent installation.
Is it necessary to copy contents of 3 CDs into one location on a harddrive on our users Server inorder for response file to work???
We will be installing Oracle 9.2.0.1 on Win2000 server.
I really appreciate any help.
Thanks

Hi,
I'm going to work on this subject in the next few weeks on a Oracle Personal v9.2.0.1.0.
I'll try to give you some informations if I can find something helpful for you.
Can you please tell me if you have some informations on your side.
Thanks.

Silent Installation Script Require

Hi,
Scripts require for silent installation of oracle 11g on Windows XP -32bit.
Oracle :-- 11gR2
OS :- Windows XP
Thanx in advance.
Regards,
Praful K

Hi,
see the description in the installation manual: [url http://download.oracle.com/docs/cd/E11882_01/install.112/e10843/advance.htm]Silent install. You have to build your own script because the environment can be special.
Herald ten Dam
http://htendam.wordpress.com

Command for silent installation of SCVMM Agent or adding Hyper-v Host to SCVMM

Similar Messages

Maybe you are looking for