[SOLVED] mplayer no sound alsa

In KDE multimedia settings I'm using phonon-gstreamer and I have also tried changing to phono-vlc. Sound in the application 'Clementine' doesn't work either. Sound is working fine for KDE desktop effects, amarok, juk, and dragonplayer, and Flash.
Using smplayer audio options I have set to alsa, and have tried all the alsa 0.1 etc options -- none work. I have also tried mplayer -vo alsa
mplayer ran from shell:
[AO_ALSA] alsa-lib: pcm_hw.c:1293:(snd_pcm_hw_open) open '/dev/snd/pcmC1D0p' failed (-2): No such file or directory
[AO_ALSA] Playback open error: No such file or directory
[AO_ALSA] alsa-lib: pcm_hw.c:1293:(snd_pcm_hw_open) open '/dev/snd/pcmC1D0p' failed (-2): No such file or directory
Could this issue be because for alsa I have  set my default sound card in user space (because I have USB mic)?
~/.asoundrc:
# Setting default device
pcm.!default {
type hw
card 1
device 0
ctl.!default {
type hw
card 1
device 0
# Enable mixing
pcm.dsp {
type plug
slave.pcm "dmix"
Last edited by ScannerDarkly (2011-07-16 20:30:29)

As you mention, sound from kde notifications and other phonon-based apps work. That means your phonon subsystem is working fine. Changing backends doesn't particularly help if both are working equally well.
Clementine does not use phonon and instead uses gstreamer directly. I believe the devs note that this is because phonon lacks some features relating to visualization. I have no experience using gstreamer and I could never get clementine to work on my systems. So, I have no suggestions for troubleshooting that (sorry!).
To set the audio out, you need to use ao, not vo (e.g. mplayer -ao alsa). I'm guessing that was just a typo.
If this is caused by your customization, can you back up your ~/.asoundrc and relogin to see if things still work (or simpler, try using a fresh temp user account)?

Similar Messages

  • [SOLVED] Software mixing on ALSA+USB sound card

    I have cheap chinesse USB soud card. lsusb says its "Tenx Technology, Inc. TP6911 Audio Headset"
    After arch installation sound was working about 2-3 reboots. Then i googled and deleted pulseaudio, and sound randomly working or not after reboots.
    After a lot of research i got /etc/asound.conf like that:
    pcm.!default {
    type hw
    card AUDIO
    ctl.!default {
    type hw
    card AUDIO
    "AUDIO" its name of card. Checked that. And now i had sound in 80% reboots.
    After research i founded that i cant play 2 sounds at same time. (And youtube writes "error occured" for 90% videos).
    Tested aplay (it never works):
    >aplay /usr/share/sounds/alsa/Front_Center.wav
    Playing WAVE '/usr/share/sounds/alsa/Front_Center.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Mono
    aplay: set_params:1239: Channels count non available
    Then played sound in other program and in same time launched aplay:
    >aplay /usr/share/sounds/alsa/Front_Center.wav
    aplay: main:722: audio open error: Device or resource busy
    So that mean i need software mixing.
    Googled, and installed "alsa-oss" and did some random stuff with config
    pcm.!default {
    type hw
    card AUDIO
    slave.pcm "dmix"
    ctl.!default {
    type hw
    card AUDIO
    slave.pcm "dmix"
    and now youtube working. I hear it. But now aplay says:
    >aplay /usr/share/skype/sounds/CallBusy.wav
    ALSA lib pcm_hw.c:1743:(_snd_pcm_hw_open) Unknown field slave
    aplay: main:722: audio open error: Invalid argument
    He dont like "slave" thing in config, but it helps. I tested 3 times, added "slave" and rebooted and youtube works. Without "slave" it not working.
    And i still cant hear 2 sounds at same time. In google ALSA says like software mixing must work without config, if not then do bugreport.
    Im in arch less then 7 days, before i had experience with ubuntu server only, so configuring ALSA is hard for me.
    Can somebody help me configure software mixing?
    Thank you.
    Last edited by pico (2013-07-07 10:36:33)

    Okay. I surfed your URLs and ended in http://alsa.opensrc.org/Dmix
    Example /etc/asound.conf from 3 and 5 works great! Thank you!
    If somebody will google Tenx Technology, Inc. TP6911 Audio Headset
    Use /etc/asound.conf (you need create it)
    pcm.dsp0 {
    type plug
    slave.pcm "hw:0"
    ctl.mixer0 {
    type hw
    card 0
    or
    pcm.dsp0 {
    type plug
    slave.pcm "dmix"
    hint {
    show on
    description "My dmix dsp0"
    ctl.mixer0 {
    type hw
    card 0
    both works for me.
    =======
    Aaaaand after 2 reboots everything is broken. Both configs not helping. aoss and alsaplayer don't make any sound.
    5 reboots later sound again works.
    =======
    Okay, i know why i need reboot.
    If you have same problem - do aplay -l, if your card not first - nothing will work. You need reboot until your card is first. I tryed to do my card always first, but then mixer dont work. And for make it work on every reboot looks like you need read 18 huge books about universe creation.
    Last edited by pico (2013-07-09 09:53:25)

  • [SOLVED] mplayer + OSS4

    Does mplayer play jerky when OSS4 is installed?
    I have tried setting ao=oss in .mplayer/config
    With ALSA, playback is smooth, with VLC+OSS, playback is smooth
    I have recompiled mplayer with --enable-ossaudio \
    Not sure if that is correct, but I saw a package in AUR with this enabled
    Not sure what to do,  I have Googled the problem, no relevant results
    Last edited by Anonymo (2010-06-03 05:45:25)

    I kept looking and changed my config to what I found on Ubuntu forums; video is smooth now.
    #======
    # Video
    #======
    # Set video driver.
    vo=xv
    # Use double-buffering. (Recommended for xv with SUB/OSD usage)
    double=yes
    #======
    # Audio
    #======
    # Set audio driver.
    ao=alsa
    # Set mixer channel
    mixer-channel=Master
    # Ajust volume differences. *
    a52drc=1
    # Fix A/V sync problems. *
    mc=0.2
    autosync=30
    #==========
    # Subtitles
    #==========
    # VobSubs
    #========
    # Align subs. (-1: as they want to align themselves)
    spualign=-1
    # Anti-alias subs. (4: best and slowest)
    spuaa=4
    # Set language.
    slang=fi,fin,en,eng
    # Text-based subtitles
    #=====================
    # Find subtitle files. (1: load all subs containing movie name)
    sub-fuzziness=1
    # Set font.
    font=/home/osmo/.fonts/microsoft/vista/Calibri.ttf
    # Set font encoding.
    subfont-encoding=unicode
    # Set subtitle file encoding.
    unicode=yes
    utf8=yes
    # Resample the font alphamap. (1: narrow black outline)
    ffactor=1
    # Set subtitle position. (100: as low as possible)
    subpos=100
    # Set subtitle alignment at its position. (2: bottom)
    subalign=2
    # Set font size. (2: proportional to movie width)
    subfont-autoscale=2
    # Set font blur radius. (default: 2)
    subfont-blur=2.0
    # Set font outline thickness. (default: 2)
    subfont-outline=2.0
    # Set autoscale coefficient. (default: 5)
    subfont-text-scale=4.4
    # OSD
    #====
    # Set autoscale coefficient. (default: 6)
    subfont-osd-scale=4.4
    #===========
    # Appearance
    #===========
    # Disable screensaver.
    stop-xscreensaver=yes
    # Position window. (50%:50%: center of screen)
    geometry=50%:50%
    Last edited by Anonymo (2010-06-02 20:47:40)

  • [SOLVED] no hdmi sound (Radeon HD 7700/7800 Series)

    Pulseaudio detects the sound card, and paplay gives sound but totem or youtube movies doesn't give any sound. Gnome sound volume test gives sound though. What should I do to fix the hdmi sound?
    'pactl list sinks' shows:
    Sink #0
    State: RUNNING
    Name: alsa_output.pci-0000_07_00.1.hdmi-stereo
    Description: Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series] Digital Stereo (HDMI)
    Driver: module-alsa-card.c
    Sample Specification: s16le 2ch 44100Hz
    Channel Map: front-left,front-right
    Owner Module: 6
    Mute: no
    Volume: front-left: 43861 / 67% / -10.46 dB, front-right: 43861 / 67% / -10.46 dB
    balance 0.00
    Base Volume: 65536 / 100% / 0.00 dB
    Monitor Source: alsa_output.pci-0000_07_00.1.hdmi-stereo.monitor
    Latency: 1182766 usec, configured 1999818 usec
    Flags: HARDWARE DECIBEL_VOLUME LATENCY SET_FORMATS
    Properties:
    alsa.resolution_bits = "16"
    device.api = "alsa"
    device.class = "sound"
    alsa.class = "generic"
    alsa.subclass = "generic-mix"
    alsa.name = "HDMI 0"
    alsa.id = "HDMI 0"
    alsa.subdevice = "0"
    alsa.subdevice_name = "subdevice #0"
    alsa.device = "3"
    alsa.card = "1"
    alsa.card_name = "HDA ATI HDMI"
    alsa.long_card_name = "HDA ATI HDMI at 0xfe760000 irq 58"
    alsa.driver_name = "snd_hda_intel"
    device.bus_path = "pci-0000:07:00.1"
    sysfs.path = "/devices/pci0000:00/0000:00:0d.0/0000:07:00.1/sound/card1"
    device.bus = "pci"
    device.vendor.id = "1002"
    device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
    device.product.id = "aab0"
    device.product.name = "Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series]"
    device.string = "hdmi:1"
    device.buffering.buffer_size = "352768"
    device.buffering.fragment_size = "176384"
    device.access_mode = "mmap+timer"
    device.profile.name = "hdmi-stereo"
    device.profile.description = "Digital Stereo (HDMI)"
    device.description = "Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series] Digital Stereo (HDMI)"
    alsa.mixer_name = "ATI R6xx HDMI"
    alsa.components = "HDA:1002aa01,00aa0100,00100300"
    module-udev-detect.discovered = "1"
    device.icon_name = "audio-card-pci"
    Ports:
    hdmi-output-0: HDMI / DisplayPort (priority: 5900, available)
    Active Port: hdmi-output-0
    Formats:
    pcm
    Sink #1
    State: SUSPENDED
    Name: alsa_output.pci-0000_00_14.2.analog-stereo
    Description: Built-in Audio Analog Stereo
    Driver: module-alsa-card.c
    Sample Specification: s16le 2ch 44100Hz
    Channel Map: front-left,front-right
    Owner Module: 7
    Mute: no
    Volume: front-left: 50112 / 76% / -6.99 dB, front-right: 50112 / 76% / -6.99 dB
    balance 0.00
    Base Volume: 65536 / 100% / 0.00 dB
    Monitor Source: alsa_output.pci-0000_00_14.2.analog-stereo.monitor
    Latency: 0 usec, configured 0 usec
    Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
    Properties:
    alsa.resolution_bits = "16"
    device.api = "alsa"
    device.class = "sound"
    alsa.class = "generic"
    alsa.subclass = "generic-mix"
    alsa.name = "ALC892 Analog"
    alsa.id = "ALC892 Analog"
    alsa.subdevice = "0"
    alsa.subdevice_name = "subdevice #0"
    alsa.device = "0"
    alsa.card = "0"
    alsa.card_name = "HDA ATI SB"
    alsa.long_card_name = "HDA ATI SB at 0xfeb00000 irq 16"
    alsa.driver_name = "snd_hda_intel"
    device.bus_path = "pci-0000:00:14.2"
    sysfs.path = "/devices/pci0000:00/0000:00:14.2/sound/card0"
    device.bus = "pci"
    device.vendor.id = "1002"
    device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
    device.product.id = "4383"
    device.product.name = "SBx00 Azalia (Intel HDA)"
    device.form_factor = "internal"
    device.string = "front:0"
    device.buffering.buffer_size = "352768"
    device.buffering.fragment_size = "176384"
    device.access_mode = "mmap+timer"
    device.profile.name = "analog-stereo"
    device.profile.description = "Analog Stereo"
    device.description = "Built-in Audio Analog Stereo"
    alsa.mixer_name = "Realtek ALC892"
    alsa.components = "HDA:10ec0892,10438436,00100302"
    module-udev-detect.discovered = "1"
    device.icon_name = "audio-card-pci"
    Ports:
    analog-output-lineout: Line Out (priority: 9900, not available)
    analog-output-headphones: Headphones (priority: 9000, not available)
    Active Port: analog-output-lineout
    Formats:
    pcm
    'pactl list short sinks' shows:
    0 alsa_output.pci-0000_07_00.1.hdmi-stereo module-alsa-card.c s16le 2ch 44100Hz SUSPENDED
    1 alsa_output.pci-0000_00_14.2.analog-stereo module-alsa-card.c s16le 2ch 44100Hz SUSPENDED
    I've already tried to comment "load-module module-suspend-on-idle" in /etc/pulse/default.pa file, but it shows idle instead of suspended. Anyone have any idea what might be wrong with the pulseaudio?
    Last edited by ahcaliskan (2015-05-19 15:45:53)

    Sound still not working. Here is the pulseaudio output:
    I: [pulseaudio] main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted
    D: [pulseaudio] core-rtclock.c: Timer slack is set to 50 us.
    D: [pulseaudio] core-util.c: setpriority() worked.
    I: [pulseaudio] core-util.c: Successfully acquired nice level -10, which is lower than the requested -11.
    I: [pulseaudio] main.c: This is PulseAudio 6.0
    D: [pulseaudio] main.c: Compilation host: x86_64-unknown-linux-gnu
    D: [pulseaudio] main.c: Compilation CFLAGS: -march=x86-64 -mtune=generic -O2 -pipe -fstack-protector-strong --param=ssp-buffer-size=4 -Wall -W -Wextra -Wno-long-long -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wlogical-op -Wsign-compare -Wformat-security -Wmissing-include-dirs -Wformat-nonliteral -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing -Wwrite-strings -Wno-unused-parameter -ffast-math -fno-common -fdiagnostics-show-option -fdiagnostics-color=auto
    D: [pulseaudio] main.c: Running on host: Linux x86_64 4.0.3 #1 SMP PREEMPT Thu May 14 08:58:24 UTC 2015
    D: [pulseaudio] main.c: Found 8 CPUs.
    I: [pulseaudio] main.c: Page size is 4096 bytes
    D: [pulseaudio] main.c: Compiled with Valgrind support: no
    D: [pulseaudio] main.c: Running in valgrind mode: no
    D: [pulseaudio] main.c: Running in VM: no
    D: [pulseaudio] main.c: Optimized build: yes
    D: [pulseaudio] main.c: FASTPATH defined, only fast path asserts disabled.
    I: [pulseaudio] main.c: Machine ID is 95303e48bec149d190471b0a51ab134e.
    I: [pulseaudio] main.c: Session ID is c2.
    I: [pulseaudio] main.c: Using runtime directory /run/user/1000/pulse.
    I: [pulseaudio] main.c: Using state directory /home/ahc/.config/pulse.
    I: [pulseaudio] main.c: Using modules directory /usr/lib/pulse-6.0/modules.
    I: [pulseaudio] main.c: Running in system mode: no
    I: [pulseaudio] main.c: Fresh high-resolution timers available! Bon appetit!
    D: [pulseaudio] memblock.c: Using shared memory pool with 1024 slots of size 64.0 KiB each, total size is 64.0 MiB, maximum usable slot size is 65472
    D: [pulseaudio] memblock.c: Using shared memory pool with 1024 slots of size 64.0 KiB each, total size is 64.0 MiB, maximum usable slot size is 65472
    I: [pulseaudio] cpu-x86.c: CPU flags: CMOV MMX SSE SSE2 SSE3 SSSE3 SSE4_1 SSE4_2 MMXEXT
    I: [pulseaudio] svolume_mmx.c: Initialising MMX optimized volume functions.
    I: [pulseaudio] remap_mmx.c: Initialising MMX optimized remappers.
    I: [pulseaudio] svolume_sse.c: Initialising SSE2 optimized volume functions.
    I: [pulseaudio] remap_sse.c: Initialising SSE2 optimized remappers.
    I: [pulseaudio] sconv_sse.c: Initialising SSE2 optimized conversions.
    I: [pulseaudio] svolume_orc.c: Initialising ORC optimized volume functions.
    D: [pulseaudio] database-gdbm.c: Opened GDBM database '/home/ahc/.config/pulse/95303e48bec149d190471b0a51ab134e-device-volumes.x86_64-unknown-linux-gnu.gdbm'
    I: [pulseaudio] module-device-restore.c: Successfully opened database file '/home/ahc/.config/pulse/95303e48bec149d190471b0a51ab134e-device-volumes'.
    I: [pulseaudio] module.c: Loaded "module-device-restore" (index: #0; argument: "").
    D: [pulseaudio] database-gdbm.c: Opened GDBM database '/home/ahc/.config/pulse/95303e48bec149d190471b0a51ab134e-stream-volumes.x86_64-unknown-linux-gnu.gdbm'
    I: [pulseaudio] module-stream-restore.c: Successfully opened database file '/home/ahc/.config/pulse/95303e48bec149d190471b0a51ab134e-stream-volumes'.
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1 added for object /org/pulseaudio/stream_restore1
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry0
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry1
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry2
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry3
    I: [pulseaudio] module.c: Loaded "module-stream-restore" (index: #1; argument: "").
    D: [pulseaudio] database-gdbm.c: Opened GDBM database '/home/ahc/.config/pulse/95303e48bec149d190471b0a51ab134e-card-database.x86_64-unknown-linux-gnu.gdbm'
    I: [pulseaudio] module-card-restore.c: Successfully opened database file '/home/ahc/.config/pulse/95303e48bec149d190471b0a51ab134e-card-database'.
    I: [pulseaudio] module.c: Loaded "module-card-restore" (index: #2; argument: "").
    I: [pulseaudio] module.c: Loaded "module-augment-properties" (index: #3; argument: "").
    I: [pulseaudio] module.c: Loaded "module-switch-on-port-available" (index: #4; argument: "").
    D: [pulseaudio] alsa-util.c: Trying hw:1,3 with SND_PCM_NO_AUTO_FORMAT ...
    D: [pulseaudio] alsa-util.c: Managed to open hw:1,3
    I: [pulseaudio] alsa-util.c: Trying to disable ALSA period wakeups, using timers only
    D: [pulseaudio] alsa-util.c: Maximum hw buffer size is 23777 ms
    D: [pulseaudio] alsa-util.c: Set buffer size first (to 88200 samples), period size second (to 88200 samples).
    I: [pulseaudio] alsa-util.c: ALSA period wakeups disabled
    I: [pulseaudio] alsa-sink.c: Successfully opened device hw:1,3.
    I: [pulseaudio] alsa-sink.c: Successfully enabled mmap() mode.
    I: [pulseaudio] alsa-sink.c: Successfully enabled timer-based scheduling mode.
    D: [pulseaudio] module-device-restore.c: Database contains no data for key: sink:alsa_output.hw_1_3
    D: [pulseaudio] module-device-restore.c: Database contains no (or invalid) data for key: sink:alsa_output.hw_1_3:null
    I: [pulseaudio] sink.c: Created sink 0 "alsa_output.hw_1_3" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
    I: [pulseaudio] sink.c: alsa.resolution_bits = "16"
    I: [pulseaudio] sink.c: device.api = "alsa"
    I: [pulseaudio] sink.c: device.class = "sound"
    I: [pulseaudio] sink.c: alsa.class = "generic"
    I: [pulseaudio] sink.c: alsa.subclass = "generic-mix"
    I: [pulseaudio] sink.c: alsa.name = "HDMI 0"
    I: [pulseaudio] sink.c: alsa.id = "HDMI 0"
    I: [pulseaudio] sink.c: alsa.subdevice = "0"
    I: [pulseaudio] sink.c: alsa.subdevice_name = "subdevice #0"
    I: [pulseaudio] sink.c: alsa.device = "3"
    I: [pulseaudio] sink.c: alsa.card = "1"
    I: [pulseaudio] sink.c: alsa.card_name = "HDA ATI HDMI"
    I: [pulseaudio] sink.c: alsa.long_card_name = "HDA ATI HDMI at 0xfe760000 irq 58"
    I: [pulseaudio] sink.c: alsa.driver_name = "snd_hda_intel"
    I: [pulseaudio] sink.c: device.bus_path = "pci-0000:07:00.1"
    I: [pulseaudio] sink.c: sysfs.path = "/devices/pci0000:00/0000:00:0d.0/0000:07:00.1/sound/card1"
    I: [pulseaudio] sink.c: device.bus = "pci"
    I: [pulseaudio] sink.c: device.vendor.id = "1002"
    I: [pulseaudio] sink.c: device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
    I: [pulseaudio] sink.c: device.product.id = "aab0"
    I: [pulseaudio] sink.c: device.product.name = "Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series]"
    I: [pulseaudio] sink.c: device.string = "hw:1,3"
    I: [pulseaudio] sink.c: device.buffering.buffer_size = "352768"
    I: [pulseaudio] sink.c: device.buffering.fragment_size = "176384"
    I: [pulseaudio] sink.c: device.access_mode = "mmap+timer"
    I: [pulseaudio] sink.c: device.description = "Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series]"
    I: [pulseaudio] sink.c: device.icon_name = "audio-card-pci"
    D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
    D: [pulseaudio] module-device-restore.c: Database contains no data for key: source:alsa_output.hw_1_3.monitor
    D: [pulseaudio] module-device-restore.c: Database contains no (or invalid) data for key: source:alsa_output.hw_1_3.monitor:null
    I: [pulseaudio] source.c: Created source 0 "alsa_output.hw_1_3.monitor" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
    I: [pulseaudio] source.c: device.description = "Monitor of Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series]"
    I: [pulseaudio] source.c: device.class = "monitor"
    I: [pulseaudio] source.c: device.icon_name = "audio-input-microphone"
    I: [pulseaudio] alsa-sink.c: Using 2.0 fragments of size 176384 bytes (999.91ms), buffer size is 352768 bytes (1999.82ms)
    I: [pulseaudio] alsa-sink.c: Time scheduling watermark is 20.00ms
    D: [pulseaudio] alsa-sink.c: hwbuf_unused=0
    D: [pulseaudio] alsa-sink.c: setting avail_min=87310
    D: [pulseaudio] alsa-util.c: snd_pcm_dump():
    D: [pulseaudio] alsa-util.c: Hardware PCM card 1 'HDA ATI HDMI' device 3 subdevice 0
    D: [pulseaudio] alsa-util.c: Its setup is:
    D: [pulseaudio] alsa-util.c: stream : PLAYBACK
    D: [pulseaudio] alsa-util.c: access : MMAP_INTERLEAVED
    D: [pulseaudio] alsa-util.c: format : S16_LE
    D: [pulseaudio] alsa-util.c: subformat : STD
    D: [pulseaudio] alsa-util.c: channels : 2
    D: [pulseaudio] alsa-util.c: rate : 44100
    D: [pulseaudio] alsa-util.c: exact rate : 44100 (44100/1)
    D: [pulseaudio] alsa-util.c: msbits : 16
    D: [pulseaudio] alsa-util.c: buffer_size : 88192
    D: [pulseaudio] alsa-util.c: period_size : 44096
    D: [pulseaudio] alsa-util.c: period_time : 999909
    D: [pulseaudio] alsa-util.c: tstamp_mode : ENABLE
    D: [pulseaudio] alsa-util.c: tstamp_type : MONOTONIC
    D: [pulseaudio] alsa-util.c: period_step : 1
    D: [pulseaudio] alsa-util.c: avail_min : 87310
    D: [pulseaudio] alsa-util.c: period_event : 0
    D: [pulseaudio] alsa-util.c: start_threshold : -1
    D: [pulseaudio] alsa-util.c: stop_threshold : 6205960286516543488
    D: [pulseaudio] alsa-util.c: silence_threshold: 0
    D: [pulseaudio] alsa-util.c: silence_size : 0
    D: [pulseaudio] alsa-util.c: boundary : 6205960286516543488
    D: [pulseaudio] alsa-util.c: appl_ptr : 0
    D: [pulseaudio] alsa-util.c: hw_ptr : 0
    D: [alsa-sink-HDMI 0] alsa-sink.c: Thread starting up
    D: [alsa-sink-HDMI 0] core-util.c: SCHED_RR|SCHED_RESET_ON_FORK worked.
    I: [alsa-sink-HDMI 0] core-util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 5.
    I: [alsa-sink-HDMI 0] alsa-sink.c: Starting playback.
    D: [alsa-sink-HDMI 0] alsa-sink.c: Cutting sleep time for the initial iterations by half.
    D: [alsa-sink-HDMI 0] alsa-sink.c: Cutting sleep time for the initial iterations by half.
    D: [pulseaudio] module-device-restore.c: Database contains no (or invalid) data for key: sink:alsa_output.hw_1_3:null
    I: [pulseaudio] module.c: Loaded "module-alsa-sink" (index: #5; argument: "device=hw:1,3").
    D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-6.0/modules/module-udev-detect.so': success
    D: [pulseaudio] module-udev-detect.c: /dev/snd/controlC1 is accessible: yes
    D: [pulseaudio] module-udev-detect.c: /devices/pci0000:00/0000:00:0d.0/0000:07:00.1/sound/card1 is busy: yes
    D: [pulseaudio] module-udev-detect.c: /dev/snd/controlC0 is accessible: yes
    D: [pulseaudio] module-udev-detect.c: /devices/pci0000:00/0000:00:14.2/sound/card0 is busy: no
    D: [pulseaudio] module-udev-detect.c: Loading module-alsa-card with arguments 'device_id="0" name="pci-0000_00_14.2" card_name="alsa_card.pci-0000_00_14.2" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1"'
    D: [pulseaudio] dbus-util.c: Successfully connected to D-Bus session bus 927ea15335ea5cfa45d57cb0555b4740 as :1.28
    D: [pulseaudio] reserve-wrap.c: Successfully acquired reservation lock on device 'Audio0'
    I: [pulseaudio] (alsa-lib)utils.c: could not open configuration file /usr/share/alsa/ucm/HDA ATI SB/HDA ATI SB.conf
    I: [pulseaudio] (alsa-lib)parser.c: error: could not parse configuration for card HDA ATI SB
    I: [pulseaudio] (alsa-lib)main.c: error: failed to import HDA ATI SB use case configuration -2
    I: [pulseaudio] alsa-ucm.c: UCM not available for card HDA ATI SB
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/profile-sets/default.conf'
    D: [pulseaudio] alsa-mixer.c: Looking at profile input:analog-mono
    D: [pulseaudio] alsa-mixer.c: Checking for recording on Analog Mono (analog-mono)
    D: [pulseaudio] alsa-util.c: Trying hw:0 with SND_PCM_NO_AUTO_FORMAT ...
    D: [pulseaudio] alsa-util.c: Managed to open hw:0
    D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    D: [pulseaudio] alsa-util.c: Trying hw:0 without SND_PCM_NO_AUTO_FORMAT ...
    D: [pulseaudio] alsa-util.c: Managed to open hw:0
    D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    D: [pulseaudio] alsa-util.c: Trying plug:hw:0 with SND_PCM_NO_AUTO_FORMAT ...
    D: [pulseaudio] alsa-util.c: Managed to open plug:hw:0
    D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    D: [pulseaudio] alsa-util.c: Trying plug:hw:0 without SND_PCM_NO_AUTO_FORMAT ...
    D: [pulseaudio] alsa-util.c: Managed to open plug:hw:0
    D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:hw:0: Invalid argument
    D: [pulseaudio] alsa-mixer.c: Caching failure to open input:analog-mono
    D: [pulseaudio] alsa-mixer.c: Looking at profile input:analog-stereo
    D: [pulseaudio] alsa-mixer.c: Checking for recording on Analog Stereo (analog-stereo)
    D: [pulseaudio] alsa-util.c: Trying front:0 with SND_PCM_NO_AUTO_FORMAT ...
    D: [pulseaudio] alsa-util.c: Managed to open front:0
    D: [pulseaudio] alsa-util.c: Maximum hw buffer size is 23777 ms
    D: [pulseaudio] alsa-util.c: Set buffer size first (to 4408 samples), period size second (to 1102 samples).
    D: [pulseaudio] alsa-mixer.c: Profile input:analog-stereo supported.
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-front-mic.conf'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-mic.conf.common'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-rear-mic.conf'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-mic.conf.common'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-internal-mic.conf'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-mic.conf.common'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-dock-mic.conf'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-mic.conf.common'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input.conf'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input.conf.common'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-mic.conf'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-mic.conf.common'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-linein.conf'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-aux.conf'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input.conf.common'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-video.conf'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input.conf.common'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-tvtuner.conf'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input.conf.common'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-fm.conf'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input.conf.common'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-mic-line.conf'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input.conf.common'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-mic.conf.common'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-headphone-mic.conf'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-mic.conf.common'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-headset-mic.conf'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-mic.conf.common'
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL front:0
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer front:0: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-front-mic'
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Front Mic Jack' succeeded (found!)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Front Mic Phantom Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=1, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=1).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Inverted Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-rear-mic'
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Rear Mic Jack' succeeded (found!)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Rear Mic Phantom Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=1, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=1).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Inverted Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-internal-mic'
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Mic Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Dock Mic Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Front Mic Jack' succeeded (found!)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Rear Mic Jack' succeeded (found!)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Internal Mic Phantom Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Int Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Int Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=1).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Inverted Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Skipping path 'analog-input-internal-mic', none of required-any elements preset.
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-dock-mic'
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Dock Mic Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Dock Mic Phantom Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=1).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Inverted Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Skipping path 'analog-input-dock-mic', none of required-any elements preset.
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input'
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' failed.
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-mic'
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Mic Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Mic Phantom Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=1).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Select' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Boost (+20dB)' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Inverted Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Skipping path 'analog-input-mic', none of required-any elements preset.
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-linein'
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Jack' succeeded (found!)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Phantom Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=1, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=1).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-aux'
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' failed.
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-video'
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' failed.
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-tvtuner'
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' failed.
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-fm'
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' failed.
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-mic-line'
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' failed.
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-headphone-mic'
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Headphone Mic Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=1).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Auto-Mute Mode' succeeded (volume=0, switch=0, enumeration=1).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Inverted Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Skipping path 'analog-input-headphone-mic', none of required-any elements preset.
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-headset-mic'
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Headset Mic Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Headset Mic Phantom Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Headphone Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Headphone Mic Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Headset Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Headset Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Headset' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=1).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Inverted Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Skipping path 'analog-input-headset-mic', none of required-any elements preset.
    D: [pulseaudio] alsa-mixer.c: Available mixer paths (after tidying):
    D: [pulseaudio] alsa-mixer.c: Path Set 0x1134570, direction=2
    D: [pulseaudio] alsa-mixer.c: Path analog-input-front-mic (Front Microphone), direction=2, priority=85, probed=yes, supported=yes, has_mute=yes, has_volume=yes, has_dB=yes, min_volume=0, max_volume=46, min_dB=-16, max_dB=60
    D: [pulseaudio] alsa-mixer.c: Element Capture, direction=2, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
    D: [pulseaudio] alsa-mixer.c: Element Front Mic Boost, direction=2, switch=0, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=4, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
    D: [pulseaudio] alsa-mixer.c: Element Input Source, direction=2, switch=0, volume=0, volume_limit=-1, enumeration=1, required=0, required_any=0, required_absent=0, mask=0x0, n_channels=0, override_map=no
    D: [pulseaudio] alsa-mixer.c: Option Front Mic (analog-input-microphone-front/analog-input-microphone-front) index=0, priority=0
    D: [pulseaudio] alsa-mixer.c: Element Rear Mic Boost, direction=2, switch=0, volume=2, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x6, n_channels=2, override_map=no
    D: [pulseaudio] alsa-mixer.c: Element Line Boost, direction=2, switch=0, volume=2, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x6, n_channels=2, override_map=no
    D: [pulseaudio] alsa-mixer.c: Jack Front Mic, alsa_name='Front Mic Jack', detection possible
    D: [pulseaudio] alsa-mixer.c: Jack Front Mic Phantom, alsa_name='Front Mic Phantom Jack', detection unavailable
    D: [pulseaudio] alsa-mixer.c: Setting analog-input-microphone-front (analog-input-microphone-front) priority=0
    D: [pulseaudio] alsa-mixer.c: Path analog-input-rear-mic (Rear Microphone), direction=2, priority=82, probed=yes, supported=yes, has_mute=yes, has_volume=yes, has_dB=yes, min_volume=0, max_volume=46, min_dB=-16, max_dB=60
    D: [pulseaudio] alsa-mixer.c: Element Capture, direction=2, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
    D: [pulseaudio] alsa-mixer.c: Element Rear Mic Boost, direction=2, switch=0, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=4, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
    D: [pulseaudio] alsa-mixer.c: Element Input Source, direction=2, switch=0, volume=0, volume_limit=-1, enumeration=1, required=0, required_any=0, required_absent=0, mask=0x0, n_channels=0, override_map=no
    D: [pulseaudio] alsa-mixer.c: Option Rear Mic (analog-input-microphone-rear/analog-input-microphone-rear) index=1, priority=0
    D: [pulseaudio] alsa-mixer.c: Element Front Mic Boost, direction=2, switch=0, volume=2, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x6, n_channels=2, override_map=no
    D: [pulseaudio] alsa-mixer.c: Element Line Boost, direction=2, switch=0, volume=2, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x6, n_channels=2, override_map=no
    D: [pulseaudio] alsa-mixer.c: Jack Rear Mic, alsa_name='Rear Mic Jack', detection possible
    D: [pulseaudio] alsa-mixer.c: Jack Rear Mic Phantom, alsa_name='Rear Mic Phantom Jack', detection unavailable
    D: [pulseaudio] alsa-mixer.c: Setting analog-input-microphone-rear (analog-input-microphone-rear) priority=0
    D: [pulseaudio] alsa-mixer.c: Path analog-input-linein (Line In), direction=2, priority=81, probed=yes, supported=yes, has_mute=yes, has_volume=yes, has_dB=yes, min_volume=0, max_volume=46, min_dB=-16, max_dB=60
    D: [pulseaudio] alsa-mixer.c: Element Capture, direction=2, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
    D: [pulseaudio] alsa-mixer.c: Element Line Boost, direction=2, switch=0, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=4, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
    D: [pulseaudio] alsa-mixer.c: Element Input Source, direction=2, switch=0, volume=0, volume_limit=-1, enumeration=1, required=0, required_any=0, required_absent=0, mask=0x0, n_channels=0, override_map=no
    D: [pulseaudio] alsa-mixer.c: Option Line (analog-input-linein/analog-input-linein) index=2, priority=0
    D: [pulseaudio] alsa-mixer.c: Element Front Mic Boost, direction=2, switch=0, volume=2, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x6, n_channels=2, override_map=no
    D: [pulseaudio] alsa-mixer.c: Element Rear Mic Boost, direction=2, switch=0, volume=2, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x6, n_channels=2, override_map=no
    D: [pulseaudio] alsa-mixer.c: Jack Line, alsa_name='Line Jack', detection possible
    D: [pulseaudio] alsa-mixer.c: Jack Line Phantom, alsa_name='Line Phantom Jack', detection unavailable
    D: [pulseaudio] alsa-mixer.c: Setting analog-input-linein (analog-input-linein) priority=0
    D: [pulseaudio] alsa-mixer.c: Looking at profile input:iec958-stereo
    D: [pulseaudio] alsa-mixer.c: Checking for recording on Digital Stereo (IEC958) (iec958-stereo)
    D: [pulseaudio] alsa-util.c: Trying iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D1c' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:0: No such file or directory
    D: [pulseaudio] alsa-mixer.c: Caching failure to open input:iec958-stereo
    D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-mono
    D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Mono (analog-mono)
    D: [pulseaudio] alsa-util.c: Trying hw:0 with SND_PCM_NO_AUTO_FORMAT ...
    D: [pulseaudio] alsa-util.c: Managed to open hw:0
    D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    D: [pulseaudio] alsa-util.c: Trying hw:0 without SND_PCM_NO_AUTO_FORMAT ...
    D: [pulseaudio] alsa-util.c: Managed to open hw:0
    D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    D: [pulseaudio] alsa-util.c: Trying plug:hw:0 with SND_PCM_NO_AUTO_FORMAT ...
    D: [pulseaudio] alsa-util.c: Managed to open plug:hw:0
    D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    D: [pulseaudio] alsa-util.c: Trying plug:hw:0 without SND_PCM_NO_AUTO_FORMAT ...
    D: [pulseaudio] alsa-util.c: Managed to open plug:hw:0
    D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:hw:0: Invalid argument
    D: [pulseaudio] alsa-mixer.c: Caching failure to open output:analog-mono
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-mono+input:analog-mono - will not be able to open output:analog-mono
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-mono+input:analog-stereo - will not be able to open output:analog-mono
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-mono+input:iec958-stereo - will not be able to open output:analog-mono
    D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-stereo
    D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Stereo (analog-stereo)
    D: [pulseaudio] alsa-util.c: Trying front:0 with SND_PCM_NO_AUTO_FORMAT ...
    D: [pulseaudio] alsa-util.c: Managed to open front:0
    D: [pulseaudio] alsa-util.c: Maximum hw buffer size is 23777 ms
    D: [pulseaudio] alsa-util.c: Set buffer size first (to 4408 samples), period size second (to 1102 samples).
    D: [pulseaudio] alsa-mixer.c: Profile output:analog-stereo supported.
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-output.conf'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-output.conf.common'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-output-lineout.conf'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-output.conf.common'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-output-speaker.conf'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-output.conf.common'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-output-headphones.conf'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-output.conf.common'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-output-headphones-2.conf'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-output.conf.common'
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL front:0
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer front:0: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-output'
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Hardware Master' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Master' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Master Mono' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Surround' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Side' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Center' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'LFE' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'CLFE' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'PCM' succeeded (volume=1, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'External Amplifier' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Bass Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'IEC958' succeeded (volume=0, switch=2, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'IEC958 Optical Raw' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Analog Output' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-output-lineout'
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Out Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Out Phantom Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Headphone Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Out Front Jack' succeeded (found!)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Out Front Phantom Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Out CLFE Jack' succeeded (found!)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Out CLFE Phantom Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Out Surround Jack' succeeded (found!)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Out Surround Phantom Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Out Side Jack' succeeded (found!)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Out Side Phantom Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Hardware Master' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Master' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker+LO' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone+LO' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Master Mono' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line HP Swap' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone' succeeded (volume=2, switch=2, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone2' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Desktop Speaker' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Surround' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Side' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Center' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'LFE' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'CLFE' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Bass Speaker' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker Front' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker Surround' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker Side' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker CLFE' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'PCM' succeeded (volume=1, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'External Amplifier' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Bass Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'IEC958' succeeded (volume=0, switch=2, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'IEC958 Optical Raw' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Analog Output' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-output-speaker'
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Headphone Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Dock Headphone Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Front Headphone Jack' succeeded (found!)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Out Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Out Front Jack' succeeded (found!)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Speaker Phantom Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Speaker Front Phantom Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Hardware Master' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Master' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Master Mono' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone' succeeded (volume=2, switch=2, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone2' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone+LO' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker+LO' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Desktop Speaker' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Speaker' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker Front' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Surround' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Surround Speaker' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker Surround' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Side' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker Side' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Center' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Center Speaker' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'LFE' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'LFE Speaker' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Bass Speaker' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'CLFE' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker CLFE' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'PCM' succeeded (volume=1, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'External Amplifier' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Bass Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'IEC958' succeeded (volume=0, switch=2, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'IEC958 Optical Raw' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Analog Output' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Skipping path 'analog-output-speaker', none of required-any elements preset.
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-output-headphones'
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Dock Headphone Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Dock Headphone Phantom Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Front Headphone Jack' succeeded (found!)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Front Headphone Phantom Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Headphone Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Headphone Phantom Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Headphone Mic Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Hardware Master' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Master' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Master Mono' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker+LO' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone+LO' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Headset' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line HP Swap' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone2' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Desktop S

  • Solving the distorted sound?

    Hi, I have itunes v7.1 and am experiencing the same sound problems everyone else seems to , (poor and lowers the volume in the middle by itself). I was thinking of installing v6.5 software but will that solve the bad sound on my music automatically or will I have to re input my cd's into itunes to resolve the sound quality issue?

    You might try upgrading to the laterst version.
    Also see troubleshooting sound problems:
    http://docs.info.apple.com/article.html?artnum=93610
    Having said that, I had to downgrade to 6.0.5.
    It is not a problem, but you have to retrieve your old 6.0.5 library from Previous iTunes Libraries folder.
    You can find the old version here:
    http://www.apple.com/support/downloads/itunes605forwindows.html

  • [SOLVED] No Sound - ALSA. Soundcard detected however

    The new version of Alsa (1.0.20) supports my new sound card- the Asus Xonar Essence STX. I installed this version like it says on the wiki page http://www.alsa-project.org/main/index. … e-virtuoso (compiled from source)
    I have no sound now. In alsamixer my Master channel is unmuted and raised but i cant hear anything (not in mplayer, not with aplay... nothing). Here are some outputs that might help you help me
    [rohit@myarch ~]$ aplay -l
    **** List of PLAYBACK Hardware Devices ****
    card 0: STX [Xonar Essence STX], device 0: Multichannel [Multichannel]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 0: STX [Xonar Essence STX], device 1: Digital [Digital]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    [rohit@myarch CD1]$ mplayer -ao alsa 03\ Radiohead\ -\ Nude.mp3
    MPlayer dev-SVN-rUNKNOWN-4.3.3 (C) 2000-2009 MPlayer Team
    CPU: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz (Family: 6, Model: 15, Stepping: 11)
    CPUflags: MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 1
    Compiled with runtime CPU detection.
    137 audio & 292 video codecs
    mplayer: could not connect to socket
    mplayer: No such file or directory
    Failed to open LIRC support. You will not be able to use your remote control.
    Playing 03 Radiohead - Nude.mp3.
    Audio only file format detected.
    ==========================================================================
    Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
    AUDIO: 44100 Hz, 2 ch, s16le, 320.0 kbit/22.68% (ratio: 40000->176400)
    Selected audio codec: [mp3] afm: mp3lib (mp3lib MPEG layer-2, layer-3)
    ==========================================================================
    AO: [alsa] 48000Hz 2ch s16le (2 bytes per sample)
    Video: no video
    Starting playback...
    [rohit@myarch ~]$ lsmod | grep snd_pcsp
    [rohit@myarch ~]$
    (blank output)
    [rohit@myarch ~]$ lsmod|grep '^snd'
    snd_seq_oss 27872 0
    snd_seq_midi_event 6004 1 snd_seq_oss
    snd_seq 48368 4 snd_seq_oss,snd_seq_midi_event
    snd_virtuoso 11748 2
    snd_oxygen_lib 29588 1 snd_virtuoso
    snd_pcm_oss 36416 0
    snd_mixer_oss 14356 2 snd_pcm_oss
    snd_pcm 67256 2 snd_oxygen_lib,snd_pcm_oss
    snd_timer 19228 2 snd_seq,snd_pcm
    snd_page_alloc 8124 1 snd_pcm
    snd_mpu401_uart 6804 1 snd_oxygen_lib
    snd_rawmidi 19712 1 snd_mpu401_uart
    snd_seq_device 6240 3 snd_seq_oss,snd_seq,snd_rawmidi
    snd 47812 13 snd_seq_oss,snd_seq,snd_virtuoso,snd_oxygen_lib,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device
    [rohit@myarch ~]$ ls -l /dev/snd/
    total 0
    crw-rw---- 1 root audio 116, 0 2009-05-07 23:34 controlC0
    crw-rw---- 1 root audio 116, 24 2009-05-07 23:34 pcmC0D0c
    crw-rw---- 1 root audio 116, 16 2009-05-07 23:56 pcmC0D0p
    crw-rw---- 1 root audio 116, 17 2009-05-07 23:34 pcmC0D1p
    crw-rw---- 1 root audio 116, 1 2009-05-07 23:34 seq
    crw-rw---- 1 root audio 116, 33 2009-05-07 23:34 timer
    [AlsaMixer v1.0.20 (Press Escape to quit)]──────────────────┐
    │ Card: Xonar Essence STX │
    │ Chip: AV200
    HELP!#
    # /etc/modprobe.conf (for v2.6 kernels)
    # ALSA portion
    alias char-major-116 snd
    alias snd-card-0 snd-virtuoso
    # module options should go here
    # OSS/Free portion
    alias char-major-14 soundcore
    alias sound-slot-0 snd-card-0
    # card #1
    alias sound-service-0-0 snd-mixer-oss
    alias sound-service-0-1 snd-seq-oss
    alias sound-service-0-3 snd-pcm-oss
    alias sound-service-0-8 snd-seq-oss
    alias sound-service-0-12 snd-pcm-oss
    Last edited by ronandi (2009-05-08 20:20:42)

    windtalker wrote:I had the same prob.
    I went back and muted line jac and my sound started working.
    What's line jac? (or jack)? and how did you do that?
    Nvm I didnt realize that I could switch on of the options to "Headphones". Solved!
    Last edited by ronandi (2009-05-08 20:20:22)

  • [solved] No sound, ALSA finds soundcard, pulseaudio does not.

    Problem:
    pulseaudio can't find my soundcard (or it can't find ALSA, not sure). It falls back to a dummy-output and no input so i can't play sounds or use my mic.
    First appeared when:
    Installing software updates like a month ago. I ignored it at first in the hopes it will resolve itself with the next update an few dates later. It didn't so far. None of the packets I updated had linux|pulse|alsa|sound|audio in its name. So i guess it just triggered the problem in a indirect way.
    What did not help:
    Reinstalling packets with pulse|alsa|sound|audio in its name.
    Deleting ${HOME}/.pulse* .
    Rebooting.
    Resetting /etc/pulse/* or /etc/asound.conf to the defaults of the packaes they come with.
    Adding or removing my user to the audio group.
    Googling. Other threads i this forum.
    Additional infos:
    (Stuff that was requested from others which had similar problems. No other [solved]-threads were helping me so far.)
    /dev/dsp does not exist.
    fuser -v /dev/snd/* returns nothing
    aplay whatever.wav produces no sound.
    aplay -D sysdefault whatever.wav works.
    Using Gnome 3 started with gdm.
    aplay -l
    **** List of PLAYBACK Hardware Devices ****
    card 0: Intel [HDA Intel], device 0: ALC272 Analog [ALC272 Analog]
    Subdevices: 0/1
    Subdevice #0: subdevice #0
    card 0: Intel [HDA Intel], device 3: HDMI 0 [HDMI 0]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    aplay -L
    null
    Discard all samples (playback) or generate zero samples (capture)
    pulse
    PulseAudio Sound Server
    default
    Default ALSA Output (currently PulseAudio Sound Server)
    sysdefault:CARD=Intel
    HDA Intel, ALC272 Analog
    Default Audio Device
    front:CARD=Intel,DEV=0
    HDA Intel, ALC272 Analog
    Front speakers
    surround40:CARD=Intel,DEV=0
    HDA Intel, ALC272 Analog
    4.0 Surround output to Front and Rear speakers
    surround41:CARD=Intel,DEV=0
    HDA Intel, ALC272 Analog
    4.1 Surround output to Front, Rear and Subwoofer speakers
    surround50:CARD=Intel,DEV=0
    HDA Intel, ALC272 Analog
    5.0 Surround output to Front, Center and Rear speakers
    surround51:CARD=Intel,DEV=0
    HDA Intel, ALC272 Analog
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
    surround71:CARD=Intel,DEV=0
    HDA Intel, ALC272 Analog
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
    hdmi:CARD=Intel,DEV=0
    HDA Intel, HDMI 0
    HDMI Audio Output
    dmesg
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.6.7-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.2 (GCC) ) #1 SMP PREEMPT Sun Nov 18 10:11:22 CET 2012
    [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux cryptdevice=/dev/sda7:root root=/dev/mapper/root ro quiet init=/bin/systemd
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000d2000-0x00000000000d3fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000d8000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b76a0fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000b76a1000-0x00000000b76a6fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000b76a7000-0x00000000b77d1fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000b77d2000-0x00000000b780efff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000b780f000-0x00000000b7908fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000b7909000-0x00000000b7b0efff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000b7b0f000-0x00000000b7b18fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000b7b19000-0x00000000b7b1efff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000b7b1f000-0x00000000b7b62fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000b7b63000-0x00000000b7b9efff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000b7b9f000-0x00000000b7be4fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000b7be5000-0x00000000b7bfefff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x00000000b7bff000-0x00000000b7bfffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000b7c00000-0x00000000b7dfffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000b8000000-0x00000000bfffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] DMI present.
    [ 0.000000] DMI: Dell Inc. Inspiron 1370/0R8PR3, BIOS A01 09/15/2009
    [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] No AGP bridge found
    [ 0.000000] e820: last_pfn = 0xb7c00 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-D3FFF write-protect
    [ 0.000000] D4000-DBFFF uncachable
    [ 0.000000] DC000-EFFFF write-back
    [ 0.000000] F0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 0B8000000 mask FF8000000 uncachable
    [ 0.000000] 1 base 000000000 mask F80000000 write-back
    [ 0.000000] 2 base 080000000 mask FC0000000 write-back
    [ 0.000000] 3 base 0FFE40000 mask FFFFC0000 write-protect
    [ 0.000000] 4 base 0B7E00000 mask FFFE00000 uncachable
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] found SMP MP-table at [mem 0x000f6bf0-0x000f6bff] mapped at [ffff8800000f6bf0]
    [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
    [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0xb7bfffff]
    [ 0.000000] [mem 0x00000000-0xb7bfffff] page 2M
    [ 0.000000] kernel direct mapping tables up to 0xb7bfffff @ [mem 0x1fffc000-0x1fffffff]
    [ 0.000000] RAMDISK: [mem 0x376e2000-0x37b68fff]
    [ 0.000000] ACPI: RSDP 00000000000f6b10 00024 (v02 DELL )
    [ 0.000000] ACPI: XSDT 00000000b7bf7369 00064 (v01 DELL CL09 06040000 LTP 00000000)
    [ 0.000000] ACPI: FACP 00000000b7be7000 000F4 (v03 TOSCPL CRESTLNE 06040000 ALAN 00000001)
    [ 0.000000] ACPI: DSDT 00000000b7be8000 077A9 (v02 Dell CANTIGA 06040000 INTL 20060608)
    [ 0.000000] ACPI: FACS 00000000b7b9efc0 00040
    [ 0.000000] ACPI: HPET 00000000b7bfed16 00038 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
    [ 0.000000] ACPI: MCFG 00000000b7bfed4e 0003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
    [ 0.000000] ACPI: OSFR 00000000b7bfed8a 00070 (v01 DELL DELL 06040000 ASL 00000061)
    [ 0.000000] ACPI: APIC 00000000b7bfedfa 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
    [ 0.000000] ACPI: BOOT 00000000b7bfee62 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
    [ 0.000000] ACPI: SLIC 00000000b7bfee8a 00176 (v01 DELL CL09 06040000 LTP 00000000)
    [ 0.000000] ACPI: SSDT 00000000b7be6000 00655 (v01 PmRef CpuPm 00003000 INTL 20050624)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000000b7bfffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0xb7bfffff]
    [ 0.000000] NODE_DATA [mem 0xb7be1000-0xb7be4fff]
    [ 0.000000] [ffffea0000000000-ffffea0002dfffff] PMD -> [ffff8800b4000000-ffff8800b6dfffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00010000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal empty
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00010000-0x0009efff]
    [ 0.000000] node 0: [mem 0x00100000-0xb76a0fff]
    [ 0.000000] node 0: [mem 0xb76a7000-0xb77d1fff]
    [ 0.000000] node 0: [mem 0xb780f000-0xb7908fff]
    [ 0.000000] node 0: [mem 0xb7b0f000-0xb7b18fff]
    [ 0.000000] node 0: [mem 0xb7b1f000-0xb7b62fff]
    [ 0.000000] node 0: [mem 0xb7b9f000-0xb7be4fff]
    [ 0.000000] node 0: [mem 0xb7bff000-0xb7bfffff]
    [ 0.000000] On node 0 totalpages: 751850
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 6 pages reserved
    [ 0.000000] DMA zone: 3913 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 11696 pages used for memmap
    [ 0.000000] DMA32 zone: 736171 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
    [ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
    [ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000d8000
    [ 0.000000] PM: Registered nosave memory: 00000000000d8000 - 0000000000100000
    [ 0.000000] PM: Registered nosave memory: 00000000b76a1000 - 00000000b76a7000
    [ 0.000000] PM: Registered nosave memory: 00000000b77d2000 - 00000000b780f000
    [ 0.000000] PM: Registered nosave memory: 00000000b7909000 - 00000000b7b0f000
    [ 0.000000] PM: Registered nosave memory: 00000000b7b19000 - 00000000b7b1f000
    [ 0.000000] PM: Registered nosave memory: 00000000b7b63000 - 00000000b7b9f000
    [ 0.000000] PM: Registered nosave memory: 00000000b7be5000 - 00000000b7bff000
    [ 0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff8800b7400000 s84608 r8192 d21888 u1048576
    [ 0.000000] pcpu-alloc: s84608 r8192 d21888 u1048576 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 740084
    [ 0.000000] Policy zone: DMA32
    [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux cryptdevice=/dev/sda7:root root=/dev/mapper/root ro quiet init=/bin/systemd
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] __ex_table already sorted, skipping sort
    [ 0.000000] xsave: enabled xstate_bv 0x3, cntxt size 0x240
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 2944188k/3010560k available (4727k kernel code, 3160k absent, 63212k reserved, 4143k data, 772k init)
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=2.
    [ 0.000000] NR_IRQS:4352 nr_irqs:512 16
    [ 0.000000] Extended CMOS year: 2000
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 12058624 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.000000] tsc: Detected 1296.696 MHz processor
    [ 0.003337] Calibrating delay loop (skipped), value calculated using timer frequency.. 2594.45 BogoMIPS (lpj=4322320)
    [ 0.003343] pid_max: default: 32768 minimum: 301
    [ 0.003400] Security Framework initialized
    [ 0.003407] AppArmor: AppArmor disabled by boot time parameter
    [ 0.003948] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.006850] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [ 0.008132] Mount-cache hash table entries: 256
    [ 0.008498] Initializing cgroup subsys cpuacct
    [ 0.008503] Initializing cgroup subsys memory
    [ 0.008517] Initializing cgroup subsys devices
    [ 0.008520] Initializing cgroup subsys freezer
    [ 0.008522] Initializing cgroup subsys net_cls
    [ 0.008525] Initializing cgroup subsys blkio
    [ 0.008570] CPU: Physical Processor ID: 0
    [ 0.008572] CPU: Processor Core ID: 0
    [ 0.008575] mce: CPU supports 6 MCE banks
    [ 0.008587] CPU0: Thermal monitoring enabled (TM2)
    [ 0.008592] process: using mwait in idle threads
    [ 0.008600] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
    Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
    tlb_flushall_shift is 0xffffffff
    [ 0.010851] ACPI: Core revision 20120711
    [ 0.016699] ftrace: allocating 18348 entries in 72 pages
    [ 0.027201] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.061706] smpboot: CPU0: Genuine Intel(R) CPU U7300 @ 1.30GHz stepping 0a
    [ 0.063329] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
    [ 0.063329] ... version: 2
    [ 0.063329] ... bit width: 40
    [ 0.063329] ... generic registers: 2
    [ 0.063329] ... value mask: 000000ffffffffff
    [ 0.063329] ... max period: 000000007fffffff
    [ 0.063329] ... fixed-purpose events: 3
    [ 0.063329] ... event mask: 0000000700000003
    [ 0.086782] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.100007] smpboot: Booting Node 0, Processors #1 OK
    [ 0.113162] Brought up 2 CPUs
    [ 0.113162] smpboot: Total of 2 processors activated (5188.90 BogoMIPS)
    [ 0.113436] devtmpfs: initialized
    [ 0.116686] PM: Registering ACPI NVS region [mem 0xb7b63000-0xb7b9efff] (245760 bytes)
    [ 0.121465] NET: Registered protocol family 16
    [ 0.121699] ACPI: bus type pci registered
    [ 0.121824] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.121828] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    [ 0.174683] PCI: Using configuration type 1 for base access
    [ 0.175619] bio: create slab <bio-0> at 0
    [ 0.175619] ACPI: Added _OSI(Module Device)
    [ 0.175619] ACPI: Added _OSI(Processor Device)
    [ 0.175619] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.175619] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.178073] ACPI: EC: Look up EC in DSDT
    [ 0.182902] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.188123] ACPI: SSDT 00000000b7b1aca0 00223 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
    [ 0.188671] ACPI: Dynamic OEM Table Load:
    [ 0.188676] ACPI: SSDT (null) 00223 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
    [ 0.188875] ACPI: SSDT 00000000b7b19620 00568 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
    [ 0.189399] ACPI: Dynamic OEM Table Load:
    [ 0.189404] ACPI: SSDT (null) 00568 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
    [ 0.189425] ACPI: SSDT 00000000b7b1aa20 001CF (v01 PmRef ApIst 00003000 INTL 20050624)
    [ 0.190407] ACPI: Dynamic OEM Table Load:
    [ 0.190412] ACPI: SSDT (null) 001CF (v01 PmRef ApIst 00003000 INTL 20050624)
    [ 0.190429] ACPI: SSDT 00000000b7b1af20 0008D (v01 PmRef ApCst 00003000 INTL 20050624)
    [ 0.190693] ACPI: Dynamic OEM Table Load:
    [ 0.190698] ACPI: SSDT (null) 0008D (v01 PmRef ApCst 00003000 INTL 20050624)
    [ 0.190715] ACPI: Interpreter enabled
    [ 0.190715] ACPI: (supports S0 S3 S4 S5)
    [ 0.190715] ACPI: Using IOAPIC for interrupt routing
    [ 0.323314] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
    [ 0.323314] ACPI: No dock devices found.
    [ 0.323314] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.323314] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.323314] PCI host bridge to bus 0000:00
    [ 0.323314] pci_bus 0000:00: busn_res: [bus 00-ff] is inserted under domain [bus 00-ff]
    [ 0.323314] pci_bus 0000:00: root bus resource [bus 00-ff]
    [ 0.323314] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.323314] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.323314] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.323314] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
    [ 0.323314] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff]
    [ 0.323314] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff]
    [ 0.323314] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000
    [ 0.323314] DMAR: Forcing write-buffer flush capability
    [ 0.323314] DMAR: Disabling IOMMU for graphics on this chipset
    [ 0.323314] pci 0000:00:02.0: [8086:2a42] type 00 class 0x030000
    [ 0.323314] pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf03fffff 64bit]
    [ 0.323314] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.323314] pci 0000:00:02.0: reg 20: [io 0x1800-0x1807]
    [ 0.323314] pci 0000:00:02.1: [8086:2a43] type 00 class 0x038000
    [ 0.323314] pci 0000:00:02.1: reg 10: [mem 0xf0400000-0xf04fffff 64bit]
    [ 0.323314] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
    [ 0.323314] pci 0000:00:1a.0: reg 20: [io 0x1820-0x183f]
    [ 0.323314] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
    [ 0.323314] pci 0000:00:1a.1: reg 20: [io 0x1840-0x185f]
    [ 0.323314] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
    [ 0.323314] pci 0000:00:1a.2: reg 20: [io 0x1860-0x187f]
    [ 0.323314] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
    [ 0.323314] pci 0000:00:1a.7: reg 10: [mem 0xf0804800-0xf0804bff]
    [ 0.323314] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
    [ 0.323314] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
    [ 0.323314] pci 0000:00:1b.0: reg 10: [mem 0xf0800000-0xf0803fff 64bit]
    [ 0.323314] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.323342] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
    [ 0.323470] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.323513] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400
    [ 0.323640] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 0.323688] pci 0000:00:1c.5: [8086:294a] type 01 class 0x060400
    [ 0.323816] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
    [ 0.323860] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
    [ 0.323931] pci 0000:00:1d.0: reg 20: [io 0x1880-0x189f]
    [ 0.324017] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
    [ 0.324087] pci 0000:00:1d.1: reg 20: [io 0x18a0-0x18bf]
    [ 0.324173] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
    [ 0.324243] pci 0000:00:1d.2: reg 20: [io 0x18c0-0x18df]
    [ 0.324346] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
    [ 0.324379] pci 0000:00:1d.7: reg 10: [mem 0xf0804c00-0xf0804fff]
    [ 0.324516] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    [ 0.324552] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
    [ 0.324666] pci 0000:00:1f.0: [8086:2917] type 00 class 0x060100
    [ 0.324866] pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601
    [ 0.324900] pci 0000:00:1f.2: reg 10: [io 0x1818-0x181f]
    [ 0.324915] pci 0000:00:1f.2: reg 14: [io 0x180c-0x180f]
    [ 0.324931] pci 0000:00:1f.2: reg 18: [io 0x1810-0x1817]
    [ 0.324946] pci 0000:00:1f.2: reg 1c: [io 0x1808-0x180b]
    [ 0.324960] pci 0000:00:1f.2: reg 20: [io 0x18e0-0x18ff]
    [ 0.324975] pci 0000:00:1f.2: reg 24: [mem 0xf0804000-0xf08047ff]
    [ 0.325062] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.325096] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
    [ 0.325123] pci 0000:00:1f.3: reg 10: [mem 0x00000000-0x000000ff 64bit]
    [ 0.325160] pci 0000:00:1f.3: reg 20: [io 0x1c00-0x1c1f]
    [ 0.325277] pci_bus 0000:02: busn_res: [bus 02] is inserted under [bus 00-ff]
    [ 0.325283] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 0.325366] pci_bus 0000:08: busn_res: [bus 08] is inserted under [bus 00-ff]
    [ 0.325632] pci 0000:08:00.0: [14e4:4315] type 00 class 0x028000
    [ 0.325707] pci 0000:08:00.0: reg 10: [mem 0xf0500000-0xf0503fff 64bit]
    [ 0.326109] pci 0000:08:00.0: supports D1 D2
    [ 0.326112] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
    [ 0.326304] pci 0000:00:1c.1: PCI bridge to [bus 08]
    [ 0.326314] pci 0000:00:1c.1: bridge window [mem 0xf0500000-0xf05fffff]
    [ 0.326391] pci_bus 0000:20: busn_res: [bus 20] is inserted under [bus 00-ff]
    [ 0.326477] pci 0000:20:00.0: [10ec:8168] type 00 class 0x020000
    [ 0.326546] pci 0000:20:00.0: reg 10: [io 0x2000-0x20ff]
    [ 0.326670] pci 0000:20:00.0: reg 18: [mem 0xf0904000-0xf0904fff 64bit pref]
    [ 0.326745] pci 0000:20:00.0: reg 20: [mem 0xf0900000-0xf0903fff 64bit pref]
    [ 0.326794] pci 0000:20:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
    [ 0.327093] pci 0000:20:00.0: supports D1 D2
    [ 0.327096] pci 0000:20:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.327302] pci 0000:00:1c.5: PCI bridge to [bus 20]
    [ 0.327309] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
    [ 0.327323] pci 0000:00:1c.5: bridge window [mem 0xf0900000-0xf09fffff 64bit pref]
    [ 0.327363] pci_bus 0000:26: busn_res: [bus 26] is inserted under [bus 00-ff]
    [ 0.327435] pci 0000:00:1e.0: PCI bridge to [bus 26] (subtractive decode)
    [ 0.327452] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 0.327456] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 0.327460] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.327463] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
    [ 0.327467] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
    [ 0.327471] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
    [ 0.327505] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.327638] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
    [ 0.327717] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
    [ 0.327766] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
    [ 0.327824] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
    [ 0.327883] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
    [ 0.327886] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
    [ 0.334993] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
    [ 0.335069] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    [ 0.335141] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 12 14 15)
    [ 0.335212] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    [ 0.335283] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
    [ 0.335355] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 *7 11 12 14 15)
    [ 0.335424] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
    [ 0.335495] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    [ 0.336671] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.336689] vgaarb: loaded
    [ 0.336691] vgaarb: bridge control possible 0000:00:02.0
    [ 0.336769] PCI: Using ACPI for IRQ routing
    [ 0.348092] PCI: pci_cache_line_size set to 64 bytes
    [ 0.348605] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
    [ 0.348608] e820: reserve RAM buffer [mem 0xb76a1000-0xb7ffffff]
    [ 0.348614] e820: reserve RAM buffer [mem 0xb77d2000-0xb7ffffff]
    [ 0.348619] e820: reserve RAM buffer [mem 0xb7909000-0xb7ffffff]
    [ 0.348623] e820: reserve RAM buffer [mem 0xb7b19000-0xb7ffffff]
    [ 0.348627] e820: reserve RAM buffer [mem 0xb7b63000-0xb7ffffff]
    [ 0.348631] e820: reserve RAM buffer [mem 0xb7be5000-0xb7ffffff]
    [ 0.348634] e820: reserve RAM buffer [mem 0xb7c00000-0xb7ffffff]
    [ 0.348791] NetLabel: Initializing
    [ 0.348794] NetLabel: domain hash size = 128
    [ 0.348796] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.348816] NetLabel: unlabeled traffic allowed by default
    [ 0.348840] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
    [ 0.348847] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
    [ 0.348855] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
    [ 0.370000] Switching to clocksource hpet
    [ 0.381464] pnp: PnP ACPI init
    [ 0.381496] ACPI: bus type pnp registered
    [ 0.382022] pnp 00:00: [bus 00-ff]
    [ 0.382027] pnp 00:00: [io 0x0000-0x0cf7 window]
    [ 0.382031] pnp 00:00: [io 0x0cf8-0x0cff]
    [ 0.382035] pnp 00:00: [io 0x0d00-0xffff window]
    [ 0.382039] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [ 0.382042] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
    [ 0.382046] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
    [ 0.382050] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
    [ 0.382053] pnp 00:00: [mem 0x000cc000-0x000cffff window]
    [ 0.382057] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
    [ 0.382060] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
    [ 0.382064] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
    [ 0.382067] pnp 00:00: [mem 0x000dc000-0x000dffff window]
    [ 0.382071] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
    [ 0.382075] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
    [ 0.382078] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
    [ 0.382086] pnp 00:00: [mem 0x000ec000-0x000effff window]
    [ 0.382089] pnp 00:00: [mem 0x000f0000-0x000fffff window]
    [ 0.382093] pnp 00:00: [mem 0xc0000000-0xdfffffff window]
    [ 0.382097] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
    [ 0.382100] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
    [ 0.382200] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    [ 0.440057] pnp 00:01: [io 0x0000-0x001f]
    [ 0.440061] pnp 00:01: [io 0x0081-0x0091]
    [ 0.440065] pnp 00:01: [io 0x0093-0x009f]
    [ 0.440068] pnp 00:01: [io 0x00c0-0x00df]
    [ 0.440072] pnp 00:01: [dma 4]
    [ 0.440121] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.440232] pnp 00:02: [mem 0xfed00000-0xfed003ff]
    [ 0.440329] system 00:02: [mem 0xfed00000-0xfed003ff] has been reserved
    [ 0.440336] system 00:02: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
    [ 0.440353] pnp 00:03: [io 0x00f0]
    [ 0.440369] pnp 00:03: [irq 13]
    [ 0.440414] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.440433] pnp 00:04: [io 0x002e-0x002f]
    [ 0.440436] pnp 00:04: [io 0x0061]
    [ 0.440439] pnp 00:04: [io 0x0063]
    [ 0.440443] pnp 00:04: [io 0x0065]
    [ 0.440446] pnp 00:04: [io 0x0067]
    [ 0.440449] pnp 00:04: [io 0x0070]
    [ 0.440452] pnp 00:04: [io 0x0080]
    [ 0.440456] pnp 00:04: [io 0x0092]
    [ 0.440459] pnp 00:04: [io 0x00b2-0x00b3]
    [ 0.440462] pnp 00:04: [io 0x0480-0x048f]
    [ 0.440466] pnp 00:04: [io 0xffff]
    [ 0.440469] pnp 00:04: [io 0xffff]
    [ 0.440472] pnp 00:04: [io 0x0400-0x047f]
    [ 0.440475] pnp 00:04: [io 0x1180-0x11ff]
    [ 0.440479] pnp 00:04: [io 0xfe00]
    [ 0.440482] pnp 00:04: [io 0xff2c-0xff7f]
    [ 0.440574] system 00:04: [io 0x0480-0x048f] has been reserved
    [ 0.440578] system 00:04: [io 0xffff] has been reserved
    [ 0.440583] system 00:04: [io 0xffff] has been reserved
    [ 0.440587] system 00:04: [io 0x0400-0x047f] has been reserved
    [ 0.440591] system 00:04: [io 0x1180-0x11ff] has been reserved
    [ 0.440596] system 00:04: [io 0xfe00] has been reserved
    [ 0.440600] system 00:04: [io 0xff2c-0xff7f] has been reserved
    [ 0.440606] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.440620] pnp 00:05: [io 0x0070-0x0077]
    [ 0.440629] pnp 00:05: [irq 8]
    [ 0.440674] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.440691] pnp 00:06: [io 0x0060]
    [ 0.440694] pnp 00:06: [io 0x0064]
    [ 0.440703] pnp 00:06: [irq 1]
    [ 0.440753] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
    [ 0.440772] pnp 00:07: [irq 12]
    [ 0.440819] pnp 00:07: Plug and Play ACPI device, IDs DLL0418 PNP0f13 (active)
    [ 0.441027] pnp 00:08: [mem 0xfed1c000-0xfed1ffff]
    [ 0.441031] pnp 00:08: [mem 0xfed10000-0xfed13fff]
    [ 0.441034] pnp 00:08: [mem 0xfed18000-0xfed18fff]
    [ 0.441038] pnp 00:08: [mem 0xfed19000-0xfed19fff]
    [ 0.441041] pnp 00:08: [mem 0xe0000000-0xefffffff]
    [ 0.441045] pnp 00:08: [mem 0xfed20000-0xfed3ffff]
    [ 0.441048] pnp 00:08: [mem 0xfed45000-0xfed8ffff]
    [ 0.441146] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.441151] system 00:08: [mem 0xfed10000-0xfed13fff] has been reserved
    [ 0.441155] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 0.441159] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 0.441164] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
    [ 0.441168] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.441172] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
    [ 0.441178] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.441356] pnp: PnP ACPI: found 9 devices
    [ 0.441359] ACPI: ACPI bus type pnp unregistered
    [ 0.449759] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
    [ 0.449766] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
    [ 0.449771] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
    [ 0.449786] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 08] add_size 1000
    [ 0.449791] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 08] add_size 200000
    [ 0.449807] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x001fffff] to [bus 20] add_size 400000
    [ 0.449828] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
    [ 0.449833] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 0.449837] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 0.449841] pci 0000:00:1c.5: res[14]=[mem 0x00100000-0x001fffff] get_res_add_size add_size 400000
    [ 0.449845] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 0.449849] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 0.449858] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc01fffff]
    [ 0.449864] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0200000-0xc03fffff 64bit pref]
    [ 0.449869] pci 0000:00:1c.1: BAR 15: assigned [mem 0xc0400000-0xc05fffff 64bit pref]
    [ 0.449874] pci 0000:00:1c.5: BAR 14: assigned [mem 0xc0600000-0xc0afffff]
    [ 0.449880] pci 0000:00:1c.0: BAR 13: assigned [io 0x3000-0x3fff]
    [ 0.449885] pci 0000:00:1c.1: BAR 13: assigned [io 0x4000-0x4fff]
    [ 0.449890] pci 0000:00:1f.3: BAR 0: assigned [mem 0xc0b00000-0xc0b000ff 64bit]
    [ 0.449908] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 0.449913] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
    [ 0.449922] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc01fffff]
    [ 0.449929] pci 0000:00:1c.0: bridge window [mem 0xc0200000-0xc03fffff 64bit pref]
    [ 0.449939] pci 0000:00:1c.1: PCI bridge to [bus 08]
    [ 0.449944] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
    [ 0.449953] pci 0000:00:1c.1: bridge window [mem 0xf0500000-0xf05fffff]
    [ 0.449960] pci 0000:00:1c.1: bridge window [mem 0xc0400000-0xc05fffff 64bit pref]
    [ 0.449971] pci 0000:20:00.0: BAR 6: assigned [mem 0xf0920000-0xf093ffff pref]
    [ 0.449975] pci 0000:00:1c.5: PCI bridge to [bus 20]
    [ 0.449980] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
    [ 0.449989] pci 0000:00:1c.5: bridge window [mem 0xc0600000-0xc0afffff]
    [ 0.449996] pci 0000:00:1c.5: bridge window [mem 0xf0900000-0xf09fffff 64bit pref]
    [ 0.450021] pci 0000:00:1e.0: PCI bridge to [bus 26]
    [ 0.450083] pci 0000:00:1e.0: setting latency timer to 64
    [ 0.450089] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.450093] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.450097] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.450101] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
    [ 0.450105] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff]
    [ 0.450108] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
    [ 0.450112] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
    [ 0.450116] pci_bus 0000:02: resource 1 [mem 0xc0000000-0xc01fffff]
    [ 0.450120] pci_bus 0000:02: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref]
    [ 0.450124] pci_bus 0000:08: resource 0 [io 0x4000-0x4fff]
    [ 0.450127] pci_bus 0000:08: resource 1 [mem 0xf0500000-0xf05fffff]
    [ 0.450131] pci_bus 0000:08: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref]
    [ 0.450135] pci_bus 0000:20: resource 0 [io 0x2000-0x2fff]
    [ 0.450139] pci_bus 0000:20: resource 1 [mem 0xc0600000-0xc0afffff]
    [ 0.450142] pci_bus 0000:20: resource 2 [mem 0xf0900000-0xf09fffff 64bit pref]
    [ 0.450146] pci_bus 0000:26: resource 4 [io 0x0000-0x0cf7]
    [ 0.450150] pci_bus 0000:26: resource 5 [io 0x0d00-0xffff]
    [ 0.450154] pci_bus 0000:26: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.450157] pci_bus 0000:26: resource 7 [mem 0x000d4000-0x000d7fff]
    [ 0.450161] pci_bus 0000:26: resource 8 [mem 0xc0000000-0xdfffffff]
    [ 0.450165] pci_bus 0000:26: resource 9 [mem 0xf0000000-0xfebfffff]
    [ 0.450219] NET: Registered protocol family 2
    [ 0.451401] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
    [ 0.456144] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.456812] TCP: Hash tables configured (established 524288 bind 65536)
    [ 0.456888] TCP: reno registered
    [ 0.456903] UDP hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.456958] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.457123] NET: Registered protocol family 1
    [ 0.457150] pci 0000:00:02.0: Boot video device
    [ 0.457669] PCI: CLS 64 bytes, default 64
    [ 0.457746] Unpacking initramfs...
    [ 0.626300] Freeing initrd memory: 4636k freed
    [ 0.628543] Simple Boot Flag at 0x3e set to 0x1
    [ 0.629045] audit: initializing netlink socket (disabled)
    [ 0.629069] type=2000 audit(1354288244.626:1): initialized
    [ 0.648430] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.651510] VFS: Disk quotas dquot_6.5.2
    [ 0.651590] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.651831] msgmni has been set to 5759
    [ 0.652156] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.652204] io scheduler noop registered
    [ 0.652208] io scheduler deadline registered
    [ 0.652301] io scheduler cfq registered (default)
    [ 0.652518] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
    [ 0.652689] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
    [ 0.652857] pcieport 0000:00:1c.5: irq 42 for MSI/MSI-X
    [ 0.653107] intel_idle: does not run on family 6 model 23
    [ 0.653156] GHES: HEST is not enabled!
    [ 0.653245] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.653953] Linux agpgart interface v0.103
    [ 0.654073] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    [ 0.669080] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.669133] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 0.669294] mousedev: PS/2 mouse device common for all mice
    [ 0.670409] rtc_cmos 00:05: RTC can wake from S4
    [ 0.670599] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
    [ 0.670636] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    [ 0.670648] cpuidle: using governor ladder
    [ 0.670651] cpuidle: using governor menu
    [ 0.670829] drop_monitor: Initializing network drop monitor service
    [ 0.670946] TCP: cubic registered
    [ 0.671122] NET: Registered protocol family 10
    [ 0.671359] NET: Registered protocol family 17
    [ 0.671373] Key type dns_resolver registered
    [ 0.671720] PM: Hibernation image not present or could not be loaded.
    [ 0.671743] registered taskstats version 1
    [ 0.672782] rtc_cmos 00:05: setting system clock to 2012-11-30 15:10:45 UTC (1354288245)
    [ 0.674872] Freeing unused kernel memory: 772k freed
    [ 0.675168] Write protecting the kernel read-only data: 8192k
    [ 0.682434] Freeing unused kernel memory: 1408k freed
    [ 0.683107] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 0.685881] Freeing unused kernel memory: 568k freed
    [ 0.698116] systemd-udevd[43]: starting version 195
    [ 0.701918] SCSI subsystem initialized
    [ 0.703991] ACPI: bus type scsi registered
    [ 0.704082] libata version 3.00 loaded.
    [ 0.705773] ahci 0000:00:1f.2: version 3.0
    [ 0.705858] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
    [ 0.705949] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
    [ 0.705955] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc sxs
    [ 0.705962] ahci 0000:00:1f.2: setting latency timer to 64
    [ 0.708617] scsi0 : ahci
    [ 0.709413] scsi1 : ahci
    [ 0.709823] scsi2 : ahci
    [ 0.710229] scsi3 : ahci
    [ 0.710359] ata1: SATA max UDMA/133 abar m2048@0xf0804000 port 0xf0804100 irq 43
    [ 0.710365] ata2: SATA max UDMA/133 abar m2048@0xf0804000 port 0xf0804180 irq 43
    [ 0.710367] ata3: DUMMY
    [ 0.710370] ata4: DUMMY
    [ 1.196712] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 1.196745] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 1.198401] ata1.00: ATA-8: WDC WD3200BEKT-75F3T0, 11.01A11, max UDMA/133
    [ 1.198405] ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
    [ 1.200123] ata1.00: configured for UDMA/133
    [ 1.200301] scsi 0:0:0:0: Direct-Access ATA WDC WD3200BEKT-7 11.0 PQ: 0 ANSI: 5
    [ 1.201956] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
    [ 1.202042] sd 0:0:0:0: [sda] Write Protect is off
    [ 1.202047] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1.202083] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.213584] ata2.00: ATAPI: TSSTcorp DVD+/-RW TS-U633F, D500, max UDMA/100
    [ 1.213590] ata2.00: applying bridge limits
    [ 1.229911] ata2.00: configured for UDMA/100
    [ 1.232328] scsi 1:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-U633F D500 PQ: 0 ANSI: 5
    [ 1.270602] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
    [ 1.271452] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 1.273864] ACPI: bus type usb registered
    [ 1.273912] usbcore: registered new interface driver usbfs
    [ 1.273946] usbcore: registered new interface driver hub
    [ 1.273996] usbcore: registered new device driver usb
    [ 1.274813] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 1.274869] ehci_hcd 0000:00:1a.7: setting latency timer to 64
    [ 1.274876] ehci_hcd 0000:00:1a.7: EHCI Host Controller
    [ 1.274891] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
    [ 1.278814] ehci_hcd 0000:00:1a.7: debug port 1
    [ 1.278826] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
    [ 1.278852] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xf0804800
    [ 1.279113] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 1.279117] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 1.280054] sr 1:0:0:0: Attached scsi CD-ROM sr0
    [ 1.286696] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
    [ 1.286950] hub 1-0:1.0: USB hub found
    [ 1.286958] hub 1-0:1.0: 6 ports detected
    [ 1.287158] ehci_hcd 0000:00:1d.7: setting latency timer to 64
    [ 1.287164] ehci_hcd 0000:00:1d.7: EHCI Host Controller
    [ 1.287174] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
    [ 1.291082] ehci_hcd 0000:00:1d.7: debug port 1
    [ 1.291093] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
    [ 1.291118] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0804c00
    [ 1.300028] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    [ 1.300266] hub 2-0:1.0: USB hub found
    [ 1.300273] hub 2-0:1.0: 6 ports detected
    [ 1.301086] uhci_hcd: USB Universal Host Controller Interface driver
    [ 1.301130] uhci_hcd 0000:00:1a.0: setting latency timer to 64
    [ 1.301135] uhci_hcd 0000:00:1a.0: UHCI Host Controller
    [ 1.301145] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
    [ 1.301191] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820
    [ 1.301506] hub 3-0:1.0: USB hub found
    [ 1.301513] hub 3-0:1.0: 2 ports detected
    [ 1.301640] uhci_hcd 0000:00:1a.1: setting latency timer to 64
    [ 1.301645] uhci_hcd 0000:00:1a.1: UHCI Host Controller
    [ 1.301654] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
    [ 1.301701] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840
    [ 1.301997] hub 4-0:1.0: USB hub found
    [ 1.302004] hub 4-0:1.0: 2 ports detected
    [ 1.302158] uhci_hcd 0000:00:1a.2: setting latency timer to 64
    [ 1.302164] uhci_hcd 0000:00:1a.2: UHCI Host Controller
    [ 1.302198] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
    [ 1.302230] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00001860
    [ 1.302434] hub 5-0:1.0: USB hub found
    [ 1.302441] hub 5-0:1.0: 2 ports detected
    [ 1.302557] uhci_hcd 0000:00:1d.0: setting latency timer to 64
    [ 1.302562] uhci_hcd 0000:00:1d.0: UHCI Host Controller
    [ 1.302572] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
    [ 1.302603] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001880
    [ 1.302824] hub 6-0:1.0: USB hub found
    [ 1.302833] hub 6-0:1.0: 2 ports detected
    [ 1.303165] uhci_hcd 0000:00:1d.1: setting latency timer to 64
    [ 1.303171] uhci_hcd 0000:00:1d.1: UHCI Host Controller
    [ 1.303186] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
    [ 1.303219] uhci_hcd 0000:00:1d.1: irq 19, io base 0x000018a0
    [ 1.303759] hub 7-0:1.0: USB hub found
    [ 1.303766] hub 7-0:1.0: 2 ports detected
    [ 1.303897] uhci_hcd 0000:00:1d.2: setting latency timer to 64
    [ 1.303903] uhci_hcd 0000:00:1d.2: UHCI Host Controller
    [ 1.303995] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
    [ 1.304040] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018c0
    [ 1.304881] hub 8-0:1.0: USB hub found
    [ 1.304888] hub 8-0:1.0: 2 ports detected
    [ 1.323613] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
    [ 1.330105] [drm] Initialized drm 1.1.0 20060810
    [ 1.331660] agpgart-intel 0000:00:00.0: Intel GM45 Chipset
    [ 1.331843] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
    [ 1.333755] agpgart-intel 0000:00:00.0: detected 131072K stolen memory
    [ 1.333940] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
    [ 1.334797] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
    [ 1.334889] ACPI: Lid Switch [LID0]
    [ 1.335079] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
    [ 1.335086] ACPI: Power Button [PWRB]
    [ 1.335191] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
    [ 1.335196] ACPI: Power Button [PWRF]
    [ 1.341526] i915 0000:00:02.0: setting latency timer to 64
    [ 1.414990] i915 0000:00:02.0: irq 44 for MSI/MSI-X
    [ 1.415006] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [ 1.415008] [drm] Driver supports precise vblank timestamp query.
    [ 1.415071] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
    [ 1.606699] usb 2-4: new high-speed USB device number 2 using ehci_hcd
    [ 1.630029] tsc: Refined TSC clocksource calibration: 1296.749 MHz
    [ 1.630036] Switching to clocksource tsc
    [ 2.030864] fbcon: inteldrmfb (fb0) is primary device
    [ 2.090024] usb 2-5: new high-speed USB device number 3 using ehci_hcd
    [ 2.574662] Console: switching to colour frame buffer device 170x48
    [ 2.579271] fb0: inteldrmfb frame buffer device
    [ 2.579273] drm: registered panic notifier
    [ 2.680113] acpi device:07: registered as cooling_device0
    [ 2.780104] acpi device:08: registered as cooling_device1
    [ 2.780177] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
    [ 2.780313] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input4
    [ 2.780358] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    [ 2.963907] device-mapper: uevent: version 1.0.3
    [ 2.964084] device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: [email protected]
    [ 3.763615] atkbd serio0: Unknown key pressed (translated set 2, code 0x8e on isa0060/serio0).
    [ 3.763622] atkbd serio0: Use 'setkeycodes e00e <keycode>' to make it known.
    [ 9.679599] XFS (dm-0): Mounting Filesystem
    [ 9.807350] XFS (dm-0): Ending clean mount
    [ 10.447920] systemd[1]: RTC configured in localtime, applying delta of 60 minutes to system time.
    [ 10.481565] systemd[1]: systemd 196 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ; arch)
    [ 10.507375] systemd[1]: Set hostname to <xxx-laptop>.
    [ 11.844864] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. See system logs and 'systemctl status display-manager.service' for details.
    [ 11.845276] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    [ 11.845371] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [ 11.845393] systemd[1]: Starting Login Prompts.
    [ 11.845414] systemd[1]: Reached target Login Prompts.
    [ 11.845429] systemd[1]: Starting Arch Daemons.
    [ 11.845447] systemd[1]: Reached target Arch Daemons.
    [ 11.845462] systemd[1]: Starting Remote File Systems.
    [ 11.845481] systemd[1]: Reached target Remote File Systems.
    [ 11.845496] systemd[1]: Starting Syslog Socket.
    [ 11.845558] systemd[1]: Listening on Syslog Socket.
    [ 11.845576] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    [ 11.845615] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    [ 11.845630] systemd[1]: Starting Delayed Shutdown Socket.
    [ 11.845668] systemd[1]: Listening on Delayed Shutdown Socket.
    [ 11.845766] systemd[1]: Starting udev Kernel Socket.
    [ 11.845804] systemd[1]: Listening on udev Kernel Socket.
    [ 11.845885] systemd[1]: Starting udev Control Socket.
    [ 11.845927] systemd[1]: Listening on udev Control Socket.
    [ 11.845979] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
    [ 11.846139] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
    [ 11.846157] systemd[1]: Expecting device dev-mapper-home.device...
    [ 11.846175] systemd[1]: Expecting device dev-sda8.device...
    [ 11.846193] systemd[1]: Expecting device dev-mapper-swap.device...
    [ 11.846210] systemd[1]: Expecting device dev-sda6.device...
    [ 11.846232] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
    [ 11.846291] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
    [ 11.846308] systemd[1]: Expecting device dev-disk-by\x2duuid-f19efb1f\x2d9a5b\x2d4f22\x2db35d\x2d4a603145a436.device...
    [ 11.846328] systemd[1]: Expecting device dev-disk-by\x2duuid-bd984744\x2d036e\x2d47e5\x2db40f\x2d04fa9f6d0f35.device...
    [ 11.846347] systemd[1]: Expecting device dev-disk-by\x2duuid-f1bab4e5\x2de736\x2d443a\x2d827e\x2d59f202a548ab.device...
    [ 11.846368] systemd[1]: Starting Journal Socket.
    [ 11.846439] systemd[1]: Listening on Journal Socket.
    [ 11.846467] systemd[1]: Started File System Check on Root Device.
    [ 11.846485] systemd[1]: Starting Remount Root and Kernel File Systems...
    [ 11.850382] systemd[1]: Mounting Temporary Directory...
    [ 11.998839] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway. (To see the over-mounted files, please manually mount the underlying file system to a secondary location.)
    [ 12.026864] systemd[1]: Mounting Huge Pages File System...
    [ 12.040270] systemd[1]: Mounting POSIX Message Queue File System...
    [ 12.043518] systemd[1]: Starting udev Coldplug all Devices...
    [ 12.156149] systemd[1]: Starting Load Kernel Modules...
    [ 12.173525] systemd[1]: Mounting Debug File System...
    [ 12.186770] systemd[1]: Starting Setup Virtual Console...
    [ 12.484840] systemd[1]: Starting Apply Kernel Variables...
    [ 12.616915] systemd[1]: Starting Set Up Additional Binary Formats...
    [ 12.630266] systemd[1]: Starting udev Kernel Device Manager...
    [ 12.636850] systemd[1]: Starting Journal Service...
    [ 12.646587] systemd[1]: Started Journal Service.
    [ 12.646650] systemd[1]: Starting Syslog.
    [ 12.646684] systemd[1]: Reached target Syslog.
    [ 12.647637] systemd[1]: Started Remount Root and Kernel File Systems.
    [ 12.647816] systemd[1]: Mounted Temporary Directory.
    [ 12.647972] systemd[1]: Mounted Huge Pages File System.
    [ 12.648127] systemd[1]: Mounted POSIX Message Queue File System.
    [ 12.653654] systemd[1]: Mounted Debug File System.
    [ 12.653705] systemd[1]: Starting Local File Systems (Pre).
    [ 12.653726] systemd[1]: Reached target Local File Systems (Pre).
    [ 12.653749] systemd[1]: Starting Load Random Seed...
    [ 12.705203] FS-Cache: Loaded
    [ 12.740616] RPC: Registered named UNIX socket transport module.
    [ 12.740621] RPC: Registered udp transport module.
    [ 12.740624] RPC: Registered tcp transport module.
    [ 12.740626] RPC: Registered tcp NFSv4.1 backchannel transport module.
    [ 12.881473] systemd-udevd[162]: starting version 196
    [ 12.988696] FS-Cache: Netfs 'nfs' registered for caching
    [ 13.298794] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [ 13.299212] r8169 0000:20:00.0: irq 45 for MSI/MSI-X
    [ 13.299501] r8169 0000:20:00.0: eth0: RTL8168d/8111d at 0xffffc9000060e000, 00:26:b9:ca:52:29, XID 081000c0 IRQ 45
    [ 13.299506] r8169 0000:20:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
    [ 13.401185] input: PC Speaker as /devices/platform/pcspkr/input/input5
    [ 13.802403] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
    [ 14.148667] input: HDA Intel HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
    [ 14.148733] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
    [ 14.208405] cfg80211: Calling CRDA to update world regulatory domain
    [ 14.318480] microcode: CPU0 sig=0x1067a, pf=0x80, revision=0xa07
    [ 14.330974] lib80211: common routines for IEEE802.11 drivers
    [ 14.330979] lib80211_crypt: registered algorithm 'NULL'
    [ 14.375031] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
    [ 14.649332] microcode: CPU0 updated to revision 0xa0b, date = 2010-09-28
    [ 14.656959] microcode: CPU1 sig=0x1067a, pf=0x80, revision=0xa07
    [ 14.660799] microcode: CPU1 updated to revision 0xa0b, date = 2010-09-28
    [ 14.668564] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 14.709327] ACPI: Requesting acpi_cpufreq
    [ 14.714946] Monitor-Mwait will be used to enter C-1 state
    [ 14.714973] Monitor-Mwait will be used to enter C-2 state
    [ 14.714989] Monitor-Mwait will be used to enter C-3 state
    [ 14.715001] tsc: Marking TSC unstable due to TSC halts in idle
    [ 14.715031] ACPI: acpi_idle registered with cpuidle
    [ 14.720557] Switching to clocksource hpet
    [ 14.757813] wmi: Mapper loaded
    [ 15.215288] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20120711/utaddress-251)
    [ 15.215300] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 15.215306] ACPI Warning: 0x0000000000001180-0x00000000000011bf SystemIO conflicts with Region \GPIO 1 (20120711/utaddress-251)
    [ 15.215313] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 15.215315] lpc_ich: Resource conflict(s) found affecting gpio_ich
    [ 15.303785] ACPI: Battery Slot [BAT1] (battery present)
    [ 15.405750] input: Dell WMI hotkeys as /devices/virtual/input/input8
    [ 15.417769] iTCO_vendor_support: vendor-support=0
    [ 15.430131] ACPI: AC Adapter [ACAD] (off-line)
    [ 15.471845] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
    [ 15.471895] iTCO_wdt: Found a ICH9M-E TCO device (Version=2, TCOBASE=0x0460)
    [ 15.472076] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 15.585541] wl: module license 'Mixed/Proprietary' taints kernel.
    [ 15.585549] Disabling lock debugging due to kernel taint
    [ 15.625424] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.0, id: 0x1a0b1, caps: 0xd04711/0xa00000/0x20000, board id: 3655, fw id: 528343
    [ 15.629342] INFO @wl_cfg80211_attach : Registered CFG80211 phy
    [ 15.654093] lib80211_crypt: registered algorithm 'TKIP'
    [ 15.654584] eth1: Broadcom BCM4315 802.11 Hybrid Wireless Controller 5.100.82.112
    [ 15.693893] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9
    [ 15.816131] ACPI Warning: 0x0000000000001c00-0x0000000000001c1f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120711/utaddress-251)
    [ 15.816143] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 16.108446] Linux media interface: v0.10
    [ 16.120558] Linux video capture interface: v2.00
    [ 16.169228] usbcore: registered new interface driver uas
    [ 16.281166] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_1.3M (0c45:6415)
    [ 16.316308] Initializing USB Mass Storage driver...
    [ 16.316609] usbcore: registered new interface driver usb-storage
    [ 16.316613] USB Mass Storage support registered.
    [ 16.328744] input: Laptop_Integrated_Webcam_1.3M as /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5:1.0/input/input10
    [ 16.328873] usbcore: registered new interface driver uvcvideo
    [ 16.328876] USB Video Class driver (1.1.1)
    [ 16.779720] usb 2-4: USB disconnect, device number 2
    [ 16.783629] scsi4 : usb-storage 2-4:1.0
    [ 16.783773] usbcore: registered new interface driver ums-realtek
    [ 17.381988] EXT4-fs (sda5): mounting ext3 file system using the ext4 subsystem
    [ 17.393596] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
    [ 21.567415] Adding 977880k swap on /dev/mapper/swap. Priority:-1 extents:1 across:977880k
    [ 21.656824] XFS (dm-1): Mounting Filesystem
    [ 21.839619] XFS (dm-1): Ending clean mount
    [ 21.940898] systemd-journald[163]: Received SIGUSR1
    [ 28.055735] r8169 0000:20:00.0: eth0: link down
    [ 28.055792] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 28.875645] Bluetooth: Core ver 2.16
    [ 28.875677] NET: Registered protocol family 31
    [ 28.875680] Bluetooth: HCI device and connection manager initialized
    [ 28.875684] Bluetooth: HCI socket layer initialized
    [ 28.875687] Bluetooth: L2CAP socket layer initialized
    [ 28.875695] Bluetooth: SCO socket layer initialized
    [ 29.041069] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
    [ 37.807702] fuse init (API version 7.20)
    [ 37.828734] EXT4-fs (sda5): re-mounted. Opts: commit=600
    lsmod
    Module Size Used by
    fuse 69173 2
    michael_mic 2074 8
    arc4 2039 4
    ecb 2105 0
    bnep 8857 2
    bluetooth 192120 7 bnep
    snd_seq 50881 1
    snd_seq_device 5268 1 snd_seq
    ums_realtek 7391 0
    usb_storage 47384 1 ums_realtek
    uvcvideo 72787 0
    videobuf2_vmalloc 2468 1 uvcvideo
    uas 11119 0
    videobuf2_memops 2246 1 videobuf2_vmalloc
    videobuf2_core 24030 1 uvcvideo
    videodev 100859 2 uvcvideo,videobuf2_core
    media 10405 2 uvcvideo,videodev
    i2c_i801 9571 0
    joydev 9991 0
    coretemp 6070 0
    kvm_intel 124749 0
    lib80211_crypt_tkip 7738 0
    wl 2558087 0
    kvm 373917 1 kvm_intel
    iTCO_wdt 5255 0
    iTCO_vendor_support 1929 1 iTCO_wdt
    dell_wmi 1485 0
    acpi_cpufreq 5933 1
    lpc_ich 10609 0
    ac 2536 0
    mperf 1267 1 acpi_cpufreq
    sparse_keymap 3056 1 dell_wmi
    battery 6773 0
    wmi 8379 1 dell_wmi
    dell_laptop 8787 0
    processor 26855 3 acpi_cpufreq
    evdev 10266 12
    psmouse 71909 0
    serio_raw 4689 0
    dcdbas 5520 1 dell_laptop
    lib80211 3949 2 wl,lib80211_crypt_tkip
    microcode 12377 0
    cfg80211 177108 1 wl
    rfkill 15604 5 cfg80211,bluetooth
    snd_hda_codec_hdmi 24487 1
    snd_hda_codec_realtek 61193 1
    snd_hda_intel 26180 3
    snd_hda_codec 98033 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel
    snd_hwdep 6428 1 snd_hda_codec
    snd_pcm_oss 38992 0
    snd_pcm 75689 5 snd_pcm_oss,snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
    snd_page_alloc 7217 2 snd_pcm,snd_hda_intel
    snd_timer 18934 3 snd_pcm,snd_seq
    snd_mixer_oss 15347 1 snd_pcm_oss
    snd 60188 16 snd_hda_codec_realtek,snd_pcm_oss,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_hda_codec,snd_hda_intel,snd_seq_device,snd_mixer_oss
    soundcore 5442 1 snd
    pcspkr 1899 0
    r8169 56839 0
    mii 4091 1 r8169
    nfs 127007 0
    lockd 64904 1 nfs
    sunrpc 186092 2 nfs,lockd
    fscache 40995 1 nfs
    ablk_helper 1972 0
    cryptd 8741 1 ablk_helper
    aes_x86_64 7508 6
    aes_generic 26138 1 aes_x86_64
    xts 3101 3
    gf128mul 6050 1 xts
    dm_crypt 15799 3
    dm_mod 72105 7 dm_crypt
    i915 495521 3
    video 11276 1 i915
    button 4662 1 i915
    i2c_algo_bit 5391 1 i915
    intel_agp 10744 1 i915
    intel_gtt 15659 3 i915,intel_agp
    drm_kms_helper 32877 1 i915
    drm 218852 4 i915,drm_kms_helper
    i2c_core 20707 6 drm,i915,i2c_i801,drm_kms_helper,i2c_algo_bit,videodev
    vfat 10119 0
    fat 48338 1 vfat
    xfs 748207 2
    ext4 440434 1
    crc16 1359 2 ext4,bluetooth
    jbd2 78751 1 ext4
    mbcache 5977 1 ext4
    uhci_hcd 23436 0
    ehci_hcd 41816 0
    sr_mod 14823 0
    usbcore 150398 6 uas,uhci_hcd,uvcvideo,ums_realtek,usb_storage,ehci_hcd
    usb_common 954 1 usbcore
    cdrom 35520 1 sr_mod
    sd_mod 29559 5
    ahci 21360 4
    libahci 20023 1 ahci
    libata 167683 2 ahci,libahci
    scsi_mod 133386 5 uas,usb_storage,libata,sd_mod,sr_mod
    lspci
    00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
    00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
    00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
    00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
    00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
    00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
    00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
    00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
    00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
    00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03)
    00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 03)
    00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
    00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
    00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
    00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
    00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
    00:1f.0 ISA bridge: Intel Corporation ICH9M-E LPC Interface Controller (rev 03)
    00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03)
    00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
    08:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01)
    20:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03)
    pacman -Q | grep ...
    alsa-lib 1.0.26-1
    alsa-plugins 1.0.26-1
    alsa-utils 1.0.26-1
    alsaplayer 0.99.81-5
    lib32-alsa-lib 1.0.26-1
    lib32-alsa-plugins 1.0.26-1
    lib32-libpulse 2.1-1
    lib32-libsndfile 1.0.25-2
    libcanberra-pulse 0.30-2
    libcdaudio 0.99.12-6
    libpulse 2.1-1
    libsndfile 1.0.25-2
    portaudio 19_20111121-1
    pulseaudio 2.1-1
    pulseaudio-alsa 2-1
    sound-juicer 3.5.0-1
    sound-theme-freedesktop 0.8-1
    soundtouch 1.6.0-1
    teamspeak-soundpack-portal 1-4
    webrtc-audio-processing 0.1-1
    pactl list
    Module #0
    Name: module-device-restore
    Argument:
    Usage counter: n/a
    Properties:
    module.author = "Lennart Poettering"
    module.description = "Automatically restore the volume/mute state of devices"
    module.version = "2.1"
    Module #1
    Name: module-stream-restore
    Argument:
    Usage counter: n/a
    Properties:
    module.author = "Lennart Poettering"
    module.description = "Automatically restore the volume/mute/device state of streams"
    module.version = "2.1"
    Module #2
    Name: module-card-restore
    Argument:
    Usage counter: n/a
    Properties:
    module.author = "Lennart Poettering"
    module.description = "Automatically restore profile of cards"
    module.version = "2.1"
    Module #3
    Name: module-augment-properties
    Argument:
    Usage counter: n/a
    Properties:
    module.author = "Lennart Poettering"
    module.description = "Augment the property sets of streams with additional static information"
    module.version = "2.1"
    Module #4
    Name: module-udev-detect
    Argument:
    Usage counter: n/a
    Properties:
    module.author = "Lennart Poettering"
    module.description = "Detect available audio hardware and load matching drivers"
    module.version = "2.1"
    Module #5
    Name: module-jackdbus-detect
    Argument:
    Usage counter: n/a
    Properties:
    module.author = "David Henningsson"
    module.descript

    I set the loglevel to debug and rebooted.
    grep -i pulse /var/log/everything.log
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: setrlimit(RLIMIT_RTPRIO, (9, 9)) failed: Operation not permitted
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] core-rtclock.c: Timer slack is set to 50 us.
    Dec 3 00:06:34 localhost rtkit-daemon[442]: Successfully made thread 713 of process 713 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] core-util.c: RealtimeKit worked.
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] core-util.c: Successfully gained nice level -11.
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: This is PulseAudio 2.1
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Compilation host: x86_64-unknown-linux-gnu
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Compilation CFLAGS: -march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -Wall -W -Wextra -Wno-long-long -Wvla -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wlogical-op -Wsign-compare -Wformat-security -Wmissing-include-dirs -Wformat-nonliteral -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Running on host: Linux x86_64 3.6.8-1-ARCH #1 SMP PREEMPT Mon Nov 26 22:10:40 CET 2012
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Found 2 CPUs.
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Page size is 4096 bytes
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Compiled with Valgrind support: no
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Running in valgrind mode: no
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Running in VM: no
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Optimized build: yes
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: FASTPATH defined, only fast path asserts disabled.
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Machine ID is 883cea362d03be37758a39f4000006db.
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Using runtime directory /home/whatever/.pulse/883cea362d03be37758a39f4000006db-runtime.
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Using state directory /home/whatever/.pulse.
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Using modules directory /usr/lib/pulse-2.1/modules.
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Running in system mode: no
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Fresh high-resolution timers available! Bon appetit!
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] memblock.c: Using shared memory pool with 1024 slots of size 64.0 KiB each, total size is 64.0 MiB, maximum usable slot size is 65472
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] cpu-x86.c: CPU flags: CMOV MMX SSE SSE2 SSE3 SSSE3 SSE4_1
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] svolume_mmx.c: Initialising MMX optimized volume functions.
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] remap_mmx.c: Initialising MMX optimized remappers.
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] svolume_sse.c: Initialising SSE2 optimized volume functions.
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] remap_sse.c: Initialising SSE2 optimized remappers.
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] sconv_sse.c: Initialising SSE2 optimized conversions.
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] svolume_orc.c: Initialising ORC optimized volume functions.
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] database-tdb.c: Opened TDB database '/home/whatever/.pulse/883cea362d03be37758a39f4000006db-device-volumes.tdb'
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] module-device-restore.c: Successfully opened database file '/home/whatever/.pulse/883cea362d03be37758a39f4000006db-device-volumes'.
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-device-restore" (index: #0; argument: "").
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] database-tdb.c: Opened TDB database '/home/whatever/.pulse/883cea362d03be37758a39f4000006db-stream-volumes.tdb'
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] module-stream-restore.c: Successfully opened database file '/home/whatever/.pulse/883cea362d03be37758a39f4000006db-stream-volumes'.
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1 added for object /org/pulseaudio/stream_restore1
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry0
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry1
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry2
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry3
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry4
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry5
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-stream-restore" (index: #1; argument: "").
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] database-tdb.c: Opened TDB database '/home/whatever/.pulse/883cea362d03be37758a39f4000006db-card-database.tdb'
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-card-restore.c: Successfully opened database file '/home/whatever/.pulse/883cea362d03be37758a39f4000006db-card-database'.
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-card-restore" (index: #2; argument: "").
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-augment-properties" (index: #3; argument: "").
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-2.1/modules/module-udev-detect.so': success
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-udev-detect.c: /dev/snd/controlC0 is accessible: yes
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-udev-detect.c: /devices/pci0000:00/0000:00:1b.0/sound/card0 is busy: yes
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-udev-detect.c: Found 1 cards.
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-udev-detect" (index: #4; argument: "").
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-2.1/modules/module-jackdbus-detect.so': success
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] dbus-util.c: Successfully connected to D-Bus session bus f8aad50a9c72259e812fef8050bbed02 as :1.11
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-jackdbus-detect.c: jackdbus isn't running.
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-jackdbus-detect" (index: #5; argument: "").
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-2.1/modules/module-bluetooth-discover.so': success
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] dbus-util.c: Successfully connected to D-Bus system bus aca7467032ad6386c1a812c250bbecf9 as :1.27
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] bluetooth-util.c: dbus: interface=org.freedesktop.DBus, path=/org/freedesktop/DBus, member=NameAcquired
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-bluetooth-discover" (index: #6; argument: "").
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-2.1/modules/module-esound-protocol-unix.so': success
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-esound-protocol-unix" (index: #7; argument: "").
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-native-protocol-unix" (index: #8; argument: "").
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-2.1/modules/module-gconf.so': success
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-gconf" (index: #9; argument: "").
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-default-device-restore.c: Saved default sink 'auto_null' not existent, not restoring default sink setting.
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-default-device-restore.c: Saved default source 'auto_null.monitor' not existent, not restoring default source setting.
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-default-device-restore" (index: #10; argument: "").
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-rescue-streams" (index: #11; argument: "").
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-always-sink.c: Autoloading null-sink as no other sinks detected.
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-device-restore.c: Restoring volume for sink auto_null.
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] sink.c: Created sink 0 "auto_null" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] sink.c: device.description = "Dummy Output"
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] sink.c: device.class = "abstract"
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] sink.c: device.icon_name = "audio-card"
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] source.c: Created source 0 "auto_null.monitor" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] source.c: device.description = "Monitor of Dummy Output"
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] source.c: device.class = "monitor"
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] source.c: device.icon_name = "audio-input-microphone"
    Dec 3 01:06:35 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Thread starting up
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-device-restore.c: Could not set format on sink auto_null
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-null-sink" (index: #12; argument: "sink_name=auto_null sink_properties='device.description="Dummy Output"'").
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-always-sink" (index: #13; argument: "").
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-intended-roles" (index: #14; argument: "").
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-suspend-on-idle.c: Sink auto_null becomes idle, timeout in 5 seconds.
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-suspend-on-idle" (index: #15; argument: "").
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-2.1/modules/module-console-kit.so': success
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-console-kit" (index: #16; argument: "").
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-2.1/modules/module-systemd-login.so': success
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] client.c: Created 0 "Login Session 1"
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-systemd-login.c: Added new session 1
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-systemd-login" (index: #17; argument: "").
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-position-event-sounds" (index: #18; argument: "").
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-role-cork.c: Using role 'phone' as trigger role.
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-role-cork.c: Using roles 'music' and 'video' as cork roles.
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-role-cork" (index: #19; argument: "").
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-filter-heuristics" (index: #20; argument: "").
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-filter-apply" (index: #21; argument: "").
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-2.1/modules/module-dbus-protocol.so': success
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Memstats added for object /org/pulseaudio/core1/memstats
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Device added for object /org/pulseaudio/core1/sink0
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Sink added for object /org/pulseaudio/core1/sink0
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Device added for object /org/pulseaudio/core1/source0
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Source added for object /org/pulseaudio/core1/source0
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module0
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module1
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module2
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module3
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module4
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module5
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module6
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module7
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module8
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module9
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module10
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module11
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module12
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module13
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module14
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module15
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module16
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module17
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module18
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module19
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module20
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module21
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client added for object /org/pulseaudio/core1/client0
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1 added for object /org/pulseaudio/core1
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-dbus-protocol" (index: #22; argument: "").
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-switch-on-port-available" (index: #23; argument: "").
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] main.c: Got org.PulseAudio1!
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] main.c: Got org.pulseaudio.Server!
    Dec 3 01:06:35 localhost pulseaudio[710]: [pulseaudio] main.c: Daemon startup successful.
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] main.c: Daemon startup complete.
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module22
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module23
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] client.c: Created 1 "Native client (UNIX socket client)"
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client added for object /org/pulseaudio/core1/client1
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Protocol version: remote 26, local 26
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=100 success=1
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: SHM possible: yes
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Negotiated SHM: yes
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-augment-properties.c: Looking for .desktop file for gnome-settings-daemon
    Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] client.c: Created 2 "Native client (UNIX socket client)"
    Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client added for object /org/pulseaudio/core1/client2
    Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Protocol version: remote 26, local 26
    Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=100 success=1
    Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: SHM possible: yes
    Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Negotiated SHM: yes
    Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] module-augment-properties.c: Looking for .desktop file for gnome-shell
    Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] module-augment-properties.c: Found /usr/share/applications/gnome-shell.desktop.
    Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] client.c: Created 3 "Native client (UNIX socket client)"
    Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client added for object /org/pulseaudio/core1/client3
    Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Protocol version: remote 26, local 26
    Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=100 success=1
    Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: SHM possible: yes
    Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Negotiated SHM: yes
    Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] module-augment-properties.c: Looking for .desktop file for canberra-gtk-play
    Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] client.c: Freed 3 "canberra-gtk-play"
    Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Connection died.
    Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client removed from object /org/pulseaudio/core1/client3
    Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted
    Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: setrlimit(RLIMIT_RTPRIO, (9, 9)) failed: Operation not permitted
    Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] core-rtclock.c: Timer slack is set to 50 us.
    Dec 3 00:06:38 localhost rtkit-daemon[442]: Successfully made thread 745 of process 745 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
    Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] core-util.c: RealtimeKit worked.
    Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] core-util.c: Successfully gained nice level -11.
    Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: This is PulseAudio 2.1
    Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Compilation host: x86_64-unknown-linux-gnu
    Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Compilation CFLAGS: -march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -Wall -W -Wextra -Wno-long-long -Wvla -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wlogical-op -Wsign-compare -Wformat-security -Wmissing-include-dirs -Wformat-nonliteral -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option
    Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Running on host: Linux x86_64 3.6.8-1-ARCH #1 SMP PREEMPT Mon Nov 26 22:10:40 CET 2012
    Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Found 2 CPUs.
    Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Page size is 4096 bytes
    Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Compiled with Valgrind support: no
    Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Running in valgrind mode: no
    Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Running in VM: no
    Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Optimized build: yes
    Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: FASTPATH defined, only fast path asserts disabled.
    Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Machine ID is 883cea362d03be37758a39f4000006db.
    Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Using runtime directory /home/whatever/.pulse/883cea362d03be37758a39f4000006db-runtime.
    Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Using state directory /home/whatever/.pulse.
    Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Using modules directory /usr/lib/pulse-2.1/modules.
    Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Running in system mode: no
    Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] pid.c: Daemon already running.
    Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] client.c: Created 4 "Native client (UNIX socket client)"
    Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client added for object /org/pulseaudio/core1/client4
    Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Protocol version: remote 26, local 26
    Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=100 success=1
    Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: SHM possible: yes
    Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Negotiated SHM: yes
    Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] module-augment-properties.c: Looking for .desktop file for pactl
    Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-x11-publish" (index: #24; argument: "display=:0").
    Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module24
    Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] client.c: Freed 4 "pactl"
    Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Connection died.
    Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client removed from object /org/pulseaudio/core1/client4
    Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] client.c: Created 5 "Native client (UNIX socket client)"
    Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client added for object /org/pulseaudio/core1/client5
    Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Protocol version: remote 26, local 26
    Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=100 success=1
    Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: SHM possible: yes
    Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Negotiated SHM: yes
    Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] module-augment-properties.c: Looking for .desktop file for pactl
    Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] module-x11-xsmp.c: Connected to session manager 'gnome-session' as '102459fa9aeb823737135449319899169800000005480030'.
    Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] client.c: Created 6 "XSMP Session on gnome-session as 102459fa9aeb823737135449319899169800000005480030"
    Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-x11-xsmp" (index: #25; argument: "display=:0 session_manager=local/whatever-laptop:@/tmp/.ICE-unix/548,unix/whatever-laptop:/tmp/.ICE-unix/548").
    Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client added for object /org/pulseaudio/core1/client6
    Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module25
    Dec 3 01:06:39 localhost pulseaudio[713]: [pulseaudio] client.c: Freed 5 "pactl"
    Dec 3 01:06:39 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Connection died.
    Dec 3 01:06:39 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client removed from object /org/pulseaudio/core1/client5
    Dec 3 01:06:40 localhost pulseaudio[713]: [pulseaudio] module-suspend-on-idle.c: Sink auto_null idle for too long, suspending ...
    Dec 3 01:06:40 localhost pulseaudio[713]: [pulseaudio] sink.c: Suspend cause of sink auto_null is 0x0004, suspending
    Dec 3 01:06:40 localhost pulseaudio[713]: [pulseaudio] core.c: Hmm, no streams around, trying to vacuum.
    Dec 3 01:06:52 localhost pulseaudio[713]: [pulseaudio] client.c: Created 7 "Native client (UNIX socket client)"
    Dec 3 01:06:52 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client added for object /org/pulseaudio/core1/client7
    Dec 3 01:06:54 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Protocol version: remote 26, local 26
    Dec 3 01:06:54 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=100 success=1
    Dec 3 01:06:54 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: SHM possible: yes
    Dec 3 01:06:54 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Negotiated SHM: yes
    Dec 3 01:06:54 localhost pulseaudio[713]: [pulseaudio] module-augment-properties.c: Looking for .desktop file for gnome-shell
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink auto_null.
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:auto_null:null.
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-stream-restore.c: Restoring device for stream sink-input-by-media-role:event.
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-intended-roles.c: Not setting device for stream audio-volume-change, because already set.
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink.c: Suspend cause of sink auto_null is 0x0000, resuming
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-suspend-on-idle.c: Sink auto_null becomes idle, timeout in 5 seconds.
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-suspend-on-idle.c: Sink auto_null becomes busy.
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] memblockq.c: memblockq requested: maxlength=33554432, tlength=0, base=4, prebuf=0, minreq=1 maxrewind=0
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432, base=4, prebuf=0, minreq=4 maxrewind=0
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: Created input 0 "audio-volume-change" on auto_null with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: event.id = "audio-volume-change"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: media.role = "event"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: media.name = "audio-volume-change"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: media.filename = "/usr/share//sounds/freedesktop/stereo/audio-volume-change.oga"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.name = "GNOME Shell"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: native-protocol.peer = "UNIX socket client"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: native-protocol.version = "26"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.id = "org.gnome.Shell"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.process.id = "717"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.process.user = "whatever"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.process.host = "whatever-laptop"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.process.binary = "gnome-shell"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.language = "en_US.utf8"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: window.x11.display = ":0"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.process.machine_id = "883cea362d03be37758a39f4000006db"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: module-stream-restore.id = "sink-input-by-media-role:event"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Requested tlength=2000.00 ms, minreq=20.00 ms
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Traditional mode enabled, modifying sink usec only for compat with minreq.
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Requested latency=1960.00 ms, Received latency=1960.00 ms
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] memblockq.c: memblockq requested: maxlength=4194304, tlength=352800, base=4, prebuf=349276, minreq=3528 maxrewind=0
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=4194304, tlength=352800, base=4, prebuf=349276, minreq=3528 maxrewind=0
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Final latency 3960.00 ms = 1960.00 ms + 2*20.00 ms + 1960.00 ms
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Stream added for object /org/pulseaudio/core1/playback_stream0
    Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] protocol-native.c: Requesting rewind due to end of underrun.
    Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Requested to rewind 345744 bytes.
    Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] sink.c: Processing rewind...
    Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] sink-input.c: Have to rewind 345744 bytes on render memblockq.
    Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] source.c: Processing rewind...
    Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Rewound 345744 bytes.
    Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] protocol-native.c: Underrun on 'audio-volume-change', 0 bytes in queue.
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink auto_null.
    Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Requested to rewind 345744 bytes.
    Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] sink.c: Processing rewind...
    Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] sink-input.c: Have to rewind 345744 bytes on render memblockq.
    Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] source.c: Processing rewind...
    Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Rewound 345744 bytes.
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:auto_null:null.
    Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Requested to rewind 352800 bytes.
    Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] sink.c: Processing rewind...
    Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] source.c: Processing rewind...
    Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Rewound 54188 bytes.
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-suspend-on-idle.c: Sink auto_null becomes idle, timeout in 5 seconds.
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-suspend-on-idle.c: Sink auto_null becomes idle, timeout in 5 seconds.
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] core.c: Hmm, no streams around, trying to vacuum.
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Stream removed from object /org/pulseaudio/core1/playback_stream0
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: Freeing input 0 "audio-volume-change"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-stream-restore.c: Restoring device for stream sink-input-by-media-role:event.
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-intended-roles.c: Not setting device for stream audio-volume-change, because already set.
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-suspend-on-idle.c: Sink auto_null becomes busy.
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] memblockq.c: memblockq requested: maxlength=33554432, tlength=0, base=4, prebuf=0, minreq=1 maxrewind=0
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432, base=4, prebuf=0, minreq=4 maxrewind=0
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: Created input 1 "audio-volume-change" on auto_null with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: event.id = "audio-volume-change"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: media.role = "event"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: media.name = "audio-volume-change"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: media.filename = "/usr/share//sounds/freedesktop/stereo/audio-volume-change.oga"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.name = "GNOME Shell"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: native-protocol.peer = "UNIX socket client"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: native-protocol.version = "26"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.id = "org.gnome.Shell"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.process.id = "717"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.process.user = "whatever"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.process.host = "whatever-laptop"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.process.binary = "gnome-shell"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.language = "en_US.utf8"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: window.x11.display = ":0"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.process.machine_id = "883cea362d03be37758a39f4000006db"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: module-stream-restore.id = "sink-input-by-media-role:event"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Requested tlength=2000.00 ms, minreq=20.00 ms
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Traditional mode enabled, modifying sink usec only for compat with minreq.
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Requested latency=1960.00 ms, Received latency=1960.00 ms
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] memblockq.c: memblockq requested: maxlength=4194304, tlength=352800, base=4, prebuf=349276, minreq=3528 maxrewind=0
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=4194304, tlength=352800, base=4, prebuf=349276, minreq=3528 maxrewind=0
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Final latency 3960.00 ms = 1960.00 ms + 2*20.00 ms + 1960.00 ms
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Stream added for object /org/pulseaudio/core1/playback_stream1
    Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] protocol-native.c: Requesting rewind due to end of underrun.
    Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Requested to rewind 345744 bytes.
    Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] sink.c: Processing rewind...
    Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] sink-input.c: Have to rewind 345744 bytes on render memblockq.
    Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] source.c: Processing rewind...
    Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Rewound 345744 bytes.
    Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] protocol-native.c: Underrun on 'audio-volume-change', 0 bytes in queue.
    Dec 3 01:08:21 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Requested to rewind 352800 bytes.
    Dec 3 01:08:21 localhost pulseaudio[713]: [null-sink] sink.c: Processing rewind...
    Dec 3 01:08:21 localhost pulseaudio[713]: [null-sink] source.c: Processing rewind...
    Dec 3 01:08:21 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Rewound 352800 bytes.
    Dec 3 01:08:21 localhost pulseaudio[713]: [pulseaudio] module-suspend-on-idle.c: Sink auto_null becomes idle, timeout in 5 seconds.
    Dec 3 01:08:21 localhost pulseaudio[713]: [pulseaudio] module-suspend-on-idle.c: Sink auto_null becomes idle, timeout in 5 seconds.
    Dec 3 01:08:21 localhost pulseaudio[713]: [pulseaudio] core.c: Hmm, no streams around, trying to vacuum.
    Dec 3 01:08:21 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Stream removed from object /org/pulseaudio/core1/playback_stream1
    Dec 3 01:08:21 localhost pulseaudio[713]: [pulseaudio] sink-input.c: Freeing input 1 "audio-volume-change"
    Dec 3 01:08:26 localhost pulseaudio[713]: [pulseaudio] module-suspend-on-idle.c: Sink auto_null idle for too long, suspending ...
    Dec 3 01:08:26 localhost pulseaudio[713]: [pulseaudio] sink.c: Suspend cause of sink auto_null is 0x0004, suspending
    Dec 3 01:08:26 localhost pulseaudio[713]: [pulseaudio] core.c: Hmm, no streams around, trying to vacuum.
    Dec 3 01:08:28 localhost pulseaudio[713]: [pulseaudio] module-device-restore.c: Synced.
    By now I also made my system not load any moudules which have oss in their name. Didn't help either.

  • [SOLVED]New Build, no sound, Alsa unable to open slave

    I've been happily using Arch on an old laptop I had lying around for 4/5  months, alongside ARM on my Raspberry Pi for a year or so. Being more than happy with it I decided to sell my 2011 i5 iMac, build a pc and hopefully learn something along the way. I mention this as it's my first build and the issue may be hardware realted, or more likely my assembly of the hardware, I've updated my sig to reflect the new parts.
    The first decision I made two days ago upon putting the system together. I had two plugs, one for HD audio, another for Realtek audio, I went with the HD option. The other variable that is new to me is an audio option in the Gigabyte uefi/bios for audio which has options for enabled, disabled & auto - I've tried all three. I thought at first going with HD option may have meant sound only via hdmi, I'm using an old vga monitor, but after a little reading it seems the HD option should work with the standard audio out's on the motherboard & case too.
    I've got a 3.5mm jack plugged into the line out on the back of the motherboard going to a phono connection on my stereo, I've also tried the headphone out on the front of the case, Zalman Z9.
    I've installed alsa-plugins and alsa-utils. Upon running speaker-test, or speaker-test -c 2 I'm getting:
    speaker-test -c 2
    speaker-test 1.0.27.2
    Playback device is default
    Stream parameters are 48000Hz, S16_LE, 2 channels
    Using 16 octaves of pink noise
    ALSA lib pcm_dmix.c:1022:(snd_pcm_dmix_open) unable to open slave
    Playback open error: -2,No such file or directory
    Using aplay:
    aplay piano2.wav
    ALSA lib pcm_dmix.c:1022:(snd_pcm_dmix_open) unable to open slave
    aplay: main:722: audio open error: No such file or directory
    Some info:
    lsmod | grep '^snd' | column -t
    snd_hda_codec_hdmi 30162 1
    snd_hda_codec_realtek 40772 1
    snd_hda_intel 36904 0
    snd_hda_codec 149633 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel
    snd_hwdep 6340 1 snd_hda_codec
    snd_pcm 77709 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
    snd_page_alloc 7242 2 snd_pcm,snd_hda_intel
    snd_timer 18726 1 snd_pcm
    snd 59173 7 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_hda_codec,snd_hda_intel
    ls -l /dev/snd
    total 0
    drwxr-xr-x 2 root root 80 Dec 1 19:31 by-path
    crw-rw----+ 1 root audio 116, 13 Dec 1 19:31 controlC0
    crw-rw----+ 1 root audio 116, 8 Dec 1 19:31 controlC1
    crw-rw----+ 1 root audio 116, 12 Dec 1 19:31 hwC0D0
    crw-rw----+ 1 root audio 116, 7 Dec 1 19:31 hwC1D2
    crw-rw----+ 1 root audio 116, 11 Dec 1 19:31 pcmC0D3p
    crw-rw----+ 1 root audio 116, 10 Dec 1 19:31 pcmC0D7p
    crw-rw----+ 1 root audio 116, 9 Dec 1 19:31 pcmC0D8p
    crw-rw----+ 1 root audio 116, 6 Dec 1 19:31 pcmC1D0c
    crw-rw----+ 1 root audio 116, 5 Dec 1 19:31 pcmC1D0p
    crw-rw----+ 1 root audio 116, 4 Dec 1 19:31 pcmC1D1c
    crw-rw----+ 1 root audio 116, 3 Dec 1 19:31 pcmC1D1p
    crw-rw----+ 1 root audio 116, 2 Dec 1 19:31 pcmC1D2c
    crw-rw---- 1 root audio 116, 1 Dec 1 19:31 seq
    crw-rw----+ 1 root audio 116, 33 Dec 1 19:31 timer
    aplay -l
    **** List of PLAYBACK Hardware Devices ****
    card 0: MID [HDA Intel MID], device 3: HDMI 0 [HDMI 0]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 0: MID [HDA Intel MID], device 7: HDMI 1 [HDMI 1]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 0: MID [HDA Intel MID], device 8: HDMI 2 [HDMI 2]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: PCH [HDA Intel PCH], device 0: ALC892 Analog [ALC892 Analog]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: PCH [HDA Intel PCH], device 1: ALC892 Digital [ALC892 Digital]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    The above is all without any .asoundrc in my home directory or anything in /etc.modprobe.d/*.conf
    From the wiki I've tried putting
    options snd slots=snd_mia,snd_hda_intel
    options snd_mia index=0
    options snd_hda_intel index=1
    in /etc/modprobe.d/alsa-base.conf, and tried reversing the 1 and 0, both 0's, both 1's to no avail.
    I've tried a few variations in .asoundrc based on the wiki example with no luck.
    I'm lost, this is the first time I've had sound issues with linux and I'm really not sure if it's rooted in the hardware, my first attempt at building a pc or a simple alsa config issue.
    Googling for unable to open slave in alsa seems to bring up mainly conflicting programm issues whic I don't think is my issue as I have no sound at all.
    *edit*
    perhaps this should be in newbie corner? my linux sound knowledge is definitely newbie status.
    Last edited by Proinsias (2013-12-03 23:22:48)

    Solved, not sure where I was going wrong in my initial attempts but a simple .asoundrc has my speakers singing. Could have sworn this was tried to death in the first half hour or so, oh well.
    On the plus side I spent my lunch hour today getting a rough idea of sound on linux and alsa preparing for a fight with my new build, ten minutes after booting up the new machine on my return home & all is well.   
    pcm.!default {
    type hw
    card 1
    ctl.!default {
    type hw
    card 0

  • [SOLVED]No Sound - ALSA - Maybe wrong audio device.

    Yesterday I installed Arch and it has been going well except that I can not get my sound working. Following https://wiki.archlinux.org/index.php/Ad … chitecture I installed alsa-utils and then used alsamixer to unmute channels. While I experimented with the channels I had a youtube video open and so I should have heard something if it had worked.
    I seem to have two sound cards. When I run alsamixer it defaults to the "Intel Haswell HDMI" chip and "Item: S/PDIF". I can unmute the S/PDIF channels but there is no volume bar. I suspect that this device is set as a default somewhere but it is not the one I want to use.
    Hitting F6 and choosing the "HDA Intel PCH" card has many columns. I have them all unmuted and I've played around quite a bit with turning various things up and down. The speaker I have in plugged into the back of the desktop I am using and is attached with both a round pale green connector and a usb connector.
    When I turn up the volume on the <Rear Mic> I can hear the static volume go up on the speaker. So I could change the volume on the speaker but the speaker was not getting audio from the web browser I had open.  When I turn up the volume on the <Front Mic> I can hear a high pitched noise increase, my only guess for where its coming from is the tiny speaker that I have plugged right into the motherboard.
    I've tried researching and I would like to try and change the default sound card like in this thread: https://bbs.archlinux.org/viewtopic.php?id=186597. But I'm afraid that I'm newer to Arch/Linux than those people or at least I'm confused trying to follow that advice. My /etc/modprobe.d directory is empty. If I made a .conf file like in that answer I would not know what to name it.
    Here is the output of some relevant (hopefully) commands:
    $ lspci -vnn | grep -A 1 -i audio
    00:03.0 Audio device [0403]: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller [8086:0c0c] (rev 06)
    Subsystem: ASRock Incorporation Device [1849:0c0c]
    00:1b.0 Audio device [0403]: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller [8086:8c20] (rev 05)
    Subsystem: ASRock Incorporation Device [1849:8892]
    $ aplay -lL
    null
    Discard all samples (playback) or generate zero samples (capture)
    hdmi:CARD=HDMI,DEV=0
    HDA Intel HDMI, HDMI 0
    HDMI Audio Output
    hdmi:CARD=HDMI,DEV=1
    HDA Intel HDMI, HDMI 1
    HDMI Audio Output
    hdmi:CARD=HDMI,DEV=2
    HDA Intel HDMI, HDMI 2
    HDMI Audio Output
    default:CARD=PCH
    HDA Intel PCH, ALC892 Analog
    Default Audio Device
    sysdefault:CARD=PCH
    HDA Intel PCH, ALC892 Analog
    Default Audio Device
    front:CARD=PCH,DEV=0
    HDA Intel PCH, ALC892 Analog
    Front speakers
    surround21:CARD=PCH,DEV=0
    HDA Intel PCH, ALC892 Analog
    2.1 Surround output to Front and Subwoofer speakers
    surround40:CARD=PCH,DEV=0
    HDA Intel PCH, ALC892 Analog
    4.0 Surround output to Front and Rear speakers
    surround41:CARD=PCH,DEV=0
    HDA Intel PCH, ALC892 Analog
    4.1 Surround output to Front, Rear and Subwoofer speakers
    surround50:CARD=PCH,DEV=0
    HDA Intel PCH, ALC892 Analog
    5.0 Surround output to Front, Center and Rear speakers
    surround51:CARD=PCH,DEV=0
    HDA Intel PCH, ALC892 Analog
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
    surround71:CARD=PCH,DEV=0
    HDA Intel PCH, ALC892 Analog
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
    iec958:CARD=PCH,DEV=0
    HDA Intel PCH, ALC892 Digital
    IEC958 (S/PDIF) Digital Audio Output
    **** List of PLAYBACK Hardware Devices ****
    card 0: HDMI [HDA Intel HDMI], device 3: HDMI 0 [HDMI 0]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 0: HDMI [HDA Intel HDMI], device 7: HDMI 1 [HDMI 1]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 0: HDMI [HDA Intel HDMI], device 8: HDMI 2 [HDMI 2]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: PCH [HDA Intel PCH], device 0: ALC892 Analog [ALC892 Analog]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: PCH [HDA Intel PCH], device 1: ALC892 Digital [ALC892 Digital]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    lsmod | grep snd
    snd_hda_codec_hdmi 53248 1
    snd_hda_codec_realtek 65536 1
    snd_hda_codec_generic 65536 1 snd_hda_codec_realtek
    snd_hda_intel 28672 0
    snd_hda_controller 28672 1 snd_hda_intel
    snd_hda_codec 114688 5 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_intel,snd_hda_controller
    snd_hwdep 16384 1 snd_hda_codec
    snd_pcm 90112 4 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel,snd_hda_controller
    snd_timer 28672 1 snd_pcm
    snd 69632 8 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel
    soundcore 16384 2 snd,snd_hda_codec
    $ speaker-test
    speaker-test 1.0.29
    Playback device is default
    Stream parameters are 48000Hz, S16_LE, 1 channels
    Using 16 octaves of pink noise
    ALSA lib pcm_dmix.c:1024:(snd_pcm_dmix_open) unable to open slave
    Playback open error: -2,No such file or directory
    Thank you for reading.
    Last edited by buffalo (2015-06-13 22:47:37)

    I followed Head_on_a_Stick's advice and the speaker is now working! Thank you so much Head_on_a_Stick. The one other time I posted on this forum was last February and you helped me out then too. You are my favorite!
    Thank you ewaller as well, but rather than look at aplay -l I think I will mark this thread as [SOLVED].
    The thing I'm still curious about is how did you know what to name the file  /etc/modprobe.d/alsa-base.conf ?
    Time for me to figure out how to get the headphone jack working.

  • [solved] After sytem update ALSA only plays sound for root

    Hello. Yesterday I performed a system update as usual, and after rebooting I found that my user account does not have any sound anymore. Root has sound just fine. I checked and my user is still in the audio group. I even removed him from the group, added him again, and rebooted but it did not help.
    I get these error messages in a terminal:
    mplayer:
    alsa-lib: pcm_dmix.c:989:(snd_pcm_dmix_open) unable to create IPC semaphore
    speaker-test:
    ALSA lib pcm_dmix.c:989:(snd_pcm_dmix_open) unable to create IPC semaphore
    Playback open error: -13,Permission denied
    Running these with a sudo works 100% fine. Alsamixer levels for my user are normal too.
    WORKAROUND: Restart timidity service.
    SOLUTION: Do not run timidity as a service in the first place.
    Last edited by mir91 (2013-11-25 13:37:12)

    Thanks for replying.
    My root user actually doesn't play sound, I just tried to play some for testing purpose after my normal user suddenly just had silence.
    Unfortunately those IPC-changes did not help. However, I removed my /etc/asound.conf file completely for testing purpose and voila, sound suddenly works again. So it seems the last update changed something that does not accept my asound configuration anymore. I will try to experiment a bit with its contents to further narrow it down.
    Ok, this is strange
    I commented out an entry
      period_time 0
    and after that my user had sound again. Then I restored that entry and...sound still works.
    I will pretend I didn't see anything and just move along I guess.
    Last edited by mir91 (2013-11-17 09:28:59)

  • No sound / ALSA after upgrade to kernel 2.6.15.4-1 - SOLVED

    Hi,
    just upgraded to 2.6.15.4-1 and my sound won't work. (Nvidia nforce 2).
    Alsamixer says no card installed. I'm not sure where to start and don't want to make a mess of things.  Anyone have any ideas??
    Thanks,
    Jim

    Ok, I need some help here. My ssoundcard is an intel ac97 (i810) , module snd-intel8x0. Here are my configurations:
    lsmod | grep snd
    snd_seq_oss 33408 0
    snd_seq_midi_event 6400 1 snd_seq_oss
    snd_seq 51984 4 snd_seq_oss,snd_seq_midi_event
    snd_seq_device 7436 2 snd_seq_oss,snd_seq
    snd_pcm_oss 50848 0
    snd_mixer_oss 17920 1 snd_pcm_oss
    snd_intel8x0 30620 0
    snd_ac97_codec 95136 1 snd_intel8x0
    snd_ac97_bus 2176 1 snd_ac97_codec
    snd_pcm 84100 3 snd_pcm_oss,snd_intel8x0,snd_ac97_codec
    snd_timer 22148 2 snd_seq,snd_pcm
    snd 49124 9 snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer
    soundcore 8160 1 snd
    snd_page_alloc 8840 2 snd_intel8x0,snd_pcm
    /etc/modprobe.conf
    # OSS Compatibility
    #install snd-pcm modprobe -i snd-pcm ; modprobe snd-pcm-oss ; true
    #install snd-seq modprobe -i snd-seq ; modprobe snd-seq-oss ; true
    # --- BEGIN: Generated by ALSACONF, do not edit. ---
    # --- ALSACONF version 1.0.10 ---
    alias snd-card-0 snd-intel8x0
    alias sound-slot-0 snd-intel8x0
    # --- END: Generated by ALSACONF, do not edit. ---
    /etc/rc.conf
    MOD_AUTOLOAD="yes"
    MODULES=(usbserial nvidia snd-intel8x0 snd-pcm-oss)
    DAEMONS=(syslog-ng !hotplug !pcmcia network netfs crond nvidia cups samba xinetd alsa)
    The mixer settings are unmutted. But still, no sound
    What am I doing wrong?

  • No sound - alsa fail after upgrade [Mostly Solved]

    Alsa cannot start:
    sudo /etc/rc.d/alsa start
    :: Restoring ALSA Levels                                                                        [BUSY] No state is present for card EWS88MT
    Found hardware: "ICE1712" "Wolfson WM9703,WM9707,WM9708,WM9717" "AC97a:574d4c03" "0x153b" "0x1115"
    Hardware is initialized using a generic method
    No state is present for card EWS88MT
                                                                                                    [FAIL]
    This happened during the last few weeks upgrades
    Edit:
    After running alsaconf I get:
    sudo /etc/rc.d/alsa start
    :: Restoring ALSA Levels                                                                        [DONE]
    But still no sound. And there are errors in errors.log:
    rpc.statd[954]: failed to create RPC listeners, exiting
    Edit2:
    The error was because I need to have rpcbind in daemons in rc.conf
    Edit3:
    After a reboot there is sound again - maybe due to running alsaconf.
    But during boot and start of Alsa there is a warning about a daemon starting a daemon - does anybody know what that is?
    Last edited by slot (2011-10-18 20:37:21)

    Okay, I fixed my issue.
    I had to run this script
    for i in $(seq 0 3);
    do amixer -Dhw:0 set 'VIA DXS',$i 80%;
    done
    The output was:
    bash-4.0$ ./alsa-fix.sh
    Simple mixer control 'VIA DXS',0
    Capabilities: pvolume
    Playback channels: Front Left - Front Right
    Limits: Playback 0 - 31
    Mono:
    Front Left: Playback 25 [81%] [-9.00dB]
    Front Right: Playback 25 [81%] [-9.00dB]
    Simple mixer control 'VIA DXS',1
    Capabilities: pvolume
    Playback channels: Front Left - Front Right
    Limits: Playback 0 - 31
    Mono:
    Front Left: Playback 25 [81%] [-9.00dB]
    Front Right: Playback 25 [81%] [-9.00dB]
    Simple mixer control 'VIA DXS',2
    Capabilities: pvolume
    Playback channels: Front Left - Front Right
    Limits: Playback 0 - 31
    Mono:
    Front Left: Playback 25 [81%] [-9.00dB]
    Front Right: Playback 25 [81%] [-9.00dB]
    Simple mixer control 'VIA DXS',3
    Capabilities: pvolume
    Playback channels: Front Left - Front Right
    Limits: Playback 0 - 31
    Mono:
    Front Left: Playback 25 [81%] [-9.00dB]
    Front Right: Playback 25 [81%] [-9.00dB]
    Hope it helps others

  • [SOLVED]Suddenly no sound, lenovo g455 alsa

    hi everyone
    My problem is: this morning I turned my laptop on  (Lenovo G455) and when I tried to volume up the sound, there was not sound!, I don't know why, alsamixer works fine, at least in the terminal, and when i try to play music in clementine, clementine "plays" the music but there is no sound in my headphones, ¿any solution?
    alsamixer output:
    sorry for my english
    thanks!
    Last edited by tronoslycer (2014-05-12 15:45:46)

    Oh I see, I am a big dimwit! haha thanks

  • [Solved] VirtualBox no sound w/ ALSA

    Everything works except fine except sound. I already re-setup all the modules since the last kernel update.
    I don't get the error message that says it's going to switch to NULL, it just boots up perfect and Windows 7 says there is no audio device.
    Any ideas?
    Last edited by Jimi (2010-09-07 03:01:13)

    Windows 7 does not have drivers for the card emulated by virtualbox, search virtualbox's documentation and use google and you will find the solution.

  • [SOLVED]Problem with sound in HDMI

    Hello good society of Arch
    Now I have problems with sound from HDMI. I use Arch as an tvPc, wasting movies and tv shows on it. I use ALSA and it works well, except of a few files that I have, then there is picture but sound is either twisted or not played at all. It does not matter whether I use vlc or mplayer, I'm experiencing the same problem.
    I have not found anything about this with google, other problems have been either hdmi sound working or not, not like it is with me, sometimes it works and sometimes it don't.
    I know that the files are ok, I can play them in anther pc I have (also using Arch on that pc).
    Does anybody know what the problem might be? What do I have to look at to find out what the problem is? This have been like this for some time now, but I haven't looked into it before, because I don't use TV that muts, but the wife does and when she stats blaming Arch, I have too do something about it.
    I have never encountered problem with Arch that i cant solve by using this forum and google
    Thanks
    Last edited by Vaski (2010-08-21 01:08:42)

    cleanrock wrote:I noticed i got no audio over hdmi on some video file which had a low audio bitrate, i solved it by resampling the sound to 48000 in ~/.mplayer/config :
    af=resample=48000
    I will look at this when i come home from work, thanks.
    nTia89 wrote:have you already read our wiki ?
    Yes i have, and sound is working, well most of the time.

Maybe you are looking for

  • I can't get X11 to start on my new install

    Hello All, I'm a recent convert from Ubuntu (surprise), and I can't get X11 to start.  I have an intel i3 cpu with a intel hd graphics 3000 card.  Here is my /etc/X11/xorg.conf file: Section "ServerLayout" Identifier "X.org Configured" Screen 0 "Scre

  • Class Media Tracker, error in tracker.waitForID(index);

    Mi problema es que el al momento de ejecutar dice "Image Fetcher 0" y no me carga las imagenes Este es el codigo: import java.awt.*; import java.applet.Applet; import java.awt.event.*; import java.awt.geom.*; import java.awt.image.*; import java.awt.

  • How do you burn imovie DVDs in Lion?

    I just bought a new i7 iMac with Lion, primarily to transfer my old videos to DVD.  While I see this iMac has iMovie 11, it doesn't come with any iDVD, and the old iDVD from Tiger will not work on it?  How am I supposed to burn copies of my final pro

  • 6120 Classic Dictionary Help

    Hey all, Does anyone know if it's possible to remove words manually added to the dictionary? I've got annoying words like "yot" and "I6m" showing up now instead of "you" and "I'm". It's bloody annoying when I'm in a hurry and so far I haven't found o

  • State Machine Programming books

    I just finished the LabVIEW basics I & II.Are there any third party books available that can help explain and expand on building State machines and event driven programming. Or at least cover this material in detail. Thanks in advance. SS