[Solved] mythtv-setup DVB (could not get card info/No such device)

Update: Solution in post #4.
I'm building a new Arch server which will replace my existing mythtv backend using a HP microserver. Other than my old machine not being updated in some time, the only difference is new box is 64bit. I have 2x Sony PlayTV USB DVB's and have left one plugged into each system.
[root@oldserver ~]# uname -a
Linux oldserver 3.5.4-1-ARCH #1 SMP PREEMPT Sat Sep 15 13:04:04 UTC 2012 i686 GNU/Linux
[root@microserver ~]# uname -a
Linux microserver 3.7.6-1-ARCH #1 SMP PREEMPT Mon Feb 4 09:15:13 CET 2013 x86_64 GNU/Linux
While trying to add my tuners to the new box from mythtv-setup I get the following error in the log and "could not get card info" on the screen in setup:
2013-02-13 20:27:47.629155 I Current MythTV Schema Version (DBSchemaVer): 1307
2013-02-13 20:28:18.498767 E FE_GET_INFO ioctl failed (/dev/dvb/adapter0/frontend0)
eno: No such device (19)
2013-02-13 20:28:18.537457 E FE_GET_INFO ioctl failed (/dev/dvb/adapter0/frontend0)
eno: No such device (19)
To me this is either permissions of the device, which match on both systems (except for the + on the oldserver which I think is ACL but output of getfacl are identical?)
[root@microserver ~]# ls -ld /dev/dvb/adapter*{,/*}
drwxr-xr-x 2 root root 120 Feb 13 17:22 /dev/dvb/adapter0
crw-rw---- 1 root video 212, 4 Feb 13 17:22 /dev/dvb/adapter0/demux0
crw-rw---- 1 root video 212, 5 Feb 13 17:22 /dev/dvb/adapter0/dvr0
crw-rw---- 1 root video 212, 3 Feb 13 17:22 /dev/dvb/adapter0/frontend0
crw-rw---- 1 root video 212, 7 Feb 13 17:22 /dev/dvb/adapter0/net0
drwxr-xr-x 2 root root 120 Feb 13 17:22 /dev/dvb/adapter1
crw-rw---- 1 root video 212, 68 Feb 13 17:22 /dev/dvb/adapter1/demux0
crw-rw---- 1 root video 212, 69 Feb 13 17:22 /dev/dvb/adapter1/dvr0
crw-rw---- 1 root video 212, 67 Feb 13 17:22 /dev/dvb/adapter1/frontend0
crw-rw---- 1 root video 212, 71 Feb 13 17:22 /dev/dvb/adapter1/net0
[root@oldserver ~]# ls -ld /dev/dvb/adapter*{,/*}
drwxr-xr-x 2 root root 120 Jan 7 21:48 /dev/dvb/adapter0
crw-rw----+ 1 root video 212, 4 Jan 7 21:48 /dev/dvb/adapter0/demux0
crw-rw----+ 1 root video 212, 5 Jan 7 21:48 /dev/dvb/adapter0/dvr0
crw-rw----+ 1 root video 212, 3 Jan 7 21:48 /dev/dvb/adapter0/frontend0
crw-rw----+ 1 root video 212, 7 Jan 7 21:48 /dev/dvb/adapter0/net0
drwxr-xr-x 2 root root 120 Jan 7 21:48 /dev/dvb/adapter1
crw-rw----+ 1 root video 212, 68 Jan 7 21:48 /dev/dvb/adapter1/demux0
crw-rw----+ 1 root video 212, 69 Jan 7 21:48 /dev/dvb/adapter1/dvr0
crw-rw----+ 1 root video 212, 67 Jan 7 21:48 /dev/dvb/adapter1/frontend0
crw-rw----+ 1 root video 212, 71 Jan 7 21:48 /dev/dvb/adapter1/net0
The users have correct group status, even tried as root.
[root@oldserver ~]# id media
uid=1001(media) gid=100(users) groups=100(users),91(video),998(mythtv)
[root@microserver ~]# id media
uid=1000(media) gid=100(users) groups=100(users),10(wheel),91(video),92(audio),93(optical),999(mythtv)
[root@oldserver ~]# id mythtv
uid=998(mythtv) gid=998(mythtv) groups=998(mythtv),91(video),92(audio),93(optical)
[root@microserver ~]# id mythtv
uid=999(mythtv) gid=999(mythtv) groups=999(mythtv),10(wheel),91(video),92(audio),93(optical),100(users)
or missing firmware which is identical bar obviously 64bit libs
[root@microserver ~]# ls -l /usr/lib*/firmware/dvb-usb-dib0700-1.20.fw
-rw-r--r-- 1 root root 33768 Oct 31 07:36 /usr/lib64/firmware/dvb-usb-dib0700-1.20.fw
-rw-r--r-- 1 root root 33768 Oct 31 07:36 /usr/lib/firmware/dvb-usb-dib0700-1.20.fw
[root@oldserver ~]# ls -l /usr/lib*/firmware/dvb-usb-dib0700-1.20.fw
-rw-r--r-- 1 root root 33768 Jun 15 2012 /usr/lib/firmware/dvb-usb-dib0700-1.20.fw
[root@microserver ~]# ls -l /lib*/firmware/dvb-usb-dib0700-1.20.fw
-rw-r--r-- 1 root root 33768 Oct 31 07:36 /lib64/firmware/dvb-usb-dib0700-1.20.fw
-rw-r--r-- 1 root root 33768 Oct 31 07:36 /lib/firmware/dvb-usb-dib0700-1.20.fw
[root@oldserver ~]# ls -l /lib*/firmware/dvb-usb-dib0700-1.20.fw
-rw-r--r-- 1 root root 33768 Jun 15 2012 /lib/firmware/dvb-usb-dib0700-1.20.fw
And the device is found, with not issues scanning channels using linuxtv-dvb-apps.....
[root@microserver ~]# dmesg | grep dvb
[ 11.892891] dvb-usb: found a 'Sony PlayTV' in cold state, will try to load a firmware
[ 12.044667] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw'
[ 12.754034] dvb-usb: found a 'Sony PlayTV' in warm state.
[ 12.754171] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 13.214473] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 13.666764] dvb-usb: schedule remote query interval to 50 msecs.
[ 13.666779] dvb-usb: Sony PlayTV successfully initialized and connected.
[ 13.667106] usbcore: registered new interface driver dvb_usb_dib0700
[root@microserver ~]# scan /usr/share/dvb/dvb-t/au-Melbourne
scanning /usr/share/dvb/dvb-t/au-Melbourne
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 226500000 1 3 9 3 1 1 0
initial transponder 177500000 1 3 9 3 1 1 0
initial transponder 191625000 1 3 9 3 1 1 0
initial transponder 219500000 1 3 9 3 1 1 0
initial transponder 536625000 1 2 9 3 1 2 0
>>> tune to: 226500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE
0x0000 0x0230: pmt_pid 0x0102 ABC -- ABC News 24 (running)
[shrink output]
Network Name 'ABC Melbourne'
[shrink output]
dumping lists (29 services)
[shrink output]
Done.
Hopefully someone wiser than I can spot the problem here and I can get this build finished
Edit: I should add that I did a trial install of Ubuntu 12.04, upto date as of few days ago and it worked perfectly though I didn't note down what kernel version (was 64bit). Nothing has changed hardware wise.
Last edited by dave00 (2013-02-23 22:57:54)

fphillips wrote:
Try femon -H -a0 while trying to add card in mythtv-setup. Explanation here: http://code.mythtv.org/trac/ticket/10830#comment:7
It seems to affect dvb usb devices. I didn't see any evidence of this patch http://patchwork.linuxtv.org/patch/13563/ in current kernels, but it may have been rewritten. I haven't had to change my card setup and don't have usb tuners, so I haven't hit this problem.
Edit: Found it, ha, just went out yesterday, will be in 3.9: (search for Juergen) http://patchwork.linuxtv.org/patch/16925/
That worked great.
I did stumble upon the femon thing at some point but I didn't see any explanation for it and all my googling for femon resulted in a plugin for VDR which totally had me stumped. After your post a tried a slightly different google string and found it was in the linuxtv-dvb-apps package. In hindsight a "pacman -Qo femon" would have given me the answer...
Thanks for your efforts fphillips.

Similar Messages

  • Problem in the setup of oracle soa " could not get deployment manage"

    hi,
    i'm trying to install Oracle SOA with oracle database XE, but i'm having an error message in the oracle bpel process manager configuration assistant: 'could not get deployment manage'..
    can u help me please!!!

    Is the database up and running, can you connect to the orabpel user?
    cheers
    James

  • I set iCloud up last week and the next day when out in the field I could not get Outlook to open up.  I want to change my settings so I can get mail at home or in the field

    I set iCloud up last week and the next day when out in the field I could not get Outlook to open up.  I want to change my settings so I can get mail at home or in the field, not just when i'm at home.  I have a PC and fios internet with Verizon at home.  I have a Sprint air card in the field or access an available wifi.  I want to change my settings to allow for receiving email in the field.  What's the point of an air card and icloud for backup fi it doesn't work in the field for some odd reason?

    Apple - Support - Mail Setup Assistant

  • DBUS doesn't start - Could not get UID and GID for username

    Hi.
    Today i installed Archlinux in other of my systems, but i have a problem. I installed the last dbus (dbus 1.4.16-1) and i putted it in my rc.conf:
    DAEMONS=(syslog-ng @network crond dbus alsa)
    but it doesn't start.
    The error is:
    Thu Apr 5 23:03:36 2012: :: Starting D-BUS system messagebus [BUSY] Failed to start message bus: Could not get UID and GID for username "dbus"
    Thu Apr 5 23:03:36 2012: [FAIL]
    So, i don't know what happen. In my other systems, i don't have any problem, only with this fresh install.
    Googling i found this solution from Chakra's wiki:
    Could not get UID and GID
    If you get the following error while starting DBUS:
    Failed to start message bus: Could not get UID and GID for username "dbus"
    then add the user like so:
    # groupadd -g 81 dbus
    # useradd -c 'System message bus' -u 81 -g dbus -d '/' -s /bin/false dbus
    If i do this, can i funk my system?
    Edit:
    That solution works well. I don't kown if in the future maybe i'll have some problem.
    Should i mark this post like "Solved"? Still i don't know what was the real problem.
    Last edited by superchango (2012-04-06 14:08:34)

    i'm out today and as i haven't completed setup yet i can't upload log to phone to post it all. 
    the problem wasn't spotted until trying to set up NetworkManager and lightdm.
    useradd and groupadd owned by shadow (4.1.5-4), it wasn't installed before dbus-core and avahi needed them though. not sure how install environment works, does it rely on installed version or installer versions?
    installed filesystem (2012.2-4) //FIRST LINE OF FILE
    /tmp/alpm_INcwzu/.INSTALL: line 2: usr/sbin/groupadd: No such file or directory
    /tmp/alpm_INcwzu/.INSTALL: line 3: usr/sbin/useradd: No such file or directory
    installed dbus-core (1.4.16-1)
    installed xcb-proto (1.7.1-1)
    installed xproto (7.0.23-1)
    installed libxdmcp (1.1.1-1)
    installed libxau (1.0.7-1)
    installed libxcb (1.8.1-1)
    installed kbproto (1.0.6-1)
    installed libx11 (1.4.99.901-1)
    installed dbus (1.4.16-1)
    /tmp/alpm_ETrJQT/.INSTALL: line 2: usr/sbin/groupadd: No such file or directory
    /tmp/alpm_ETrJQT/.INSTALL: line 3: usr/sbin/useradd: No such file or directory
    // INFO ON ADDING AVAHI TO RC.CONF
    installed avahi (0.6.31-1)
    // LOTS OF SUCCESSFUL PACKAGES
    installed shadow (4.1.5-4)
    // MORE SUCESS
    installed mkinitcpio (0.8.6-2)
    >>> Updating module dependencies
    ==> Creating gzip initcpio image: /boot/initramfs-linux.img
    bsdcpio: Failed to set default locale
    // REPEAT FOR FALLBACK, SAME ERROR
    After that it's fine.

  • Could not getting field values from form

    hi,
    hellow, can you help me for solving the bellow problem
    i have form its enctype attribute of form tag is setted as multipart/form-data. when i am submiting this form, i call a request.getParameter(); in the submitting jsp file. But for any controls such as text,checkbox,select box etc could not get its corresponding value.

    Its obvious why its not picking up the change in the second action.
    Lets see...
    Here is your case I
    You get the populated form which is also put in the request with updated value from the JSP....
    (1)
    protected Forward updateGoalObjective(GoalsForm form)
    form.setGoalId(44); //int field set to 44
    return new Forward("success");
    You set one of the fields some other value....in one but how will the second action know about it???
    You try to execute the second action and the action grabs the form from the request again. This is the original form submitted by the JSP so you still see that value...
    You will have to pass in the customized or processed form for the form to be able to get it...
    protected Forward showGoal(GoalsForm form)
    System.out.println(form.getGoalId()); //prints 68
    return new Forward("success");
    In your second case you create a new form...why would you want to do that if you have a form value being set in JSP??
    The answer is you should be doing something Like this:
    * @jpf:action form="goalsForm"
    * @jpf:forward name="success" path="showGoal.do"
    protected Forward updateGoalObjective(GoalsForm form)
    //other code
    form.setGoalId(44); //int field set to 44
    return new Forward("success", form);
    * @jpf:action form="goalsForm"
    * @jpf:forward name="success" path="Goal.jsp"
    protected Forward showGoal(GoalsForm form)
    System.out.println(form.getGoalId()); //prints 68
    return new Forward("success");
    }

  • OWA 2007 Issue : Microsoft.Exchange.Data.Storage.VirusMessageDeletedException Could not get properties.

    Hi I am facing an issue with Outlook web access on my production server Exchange Server 2007 with Sp1. When i try to reply or forward a message from OWA it displays The message has been deleted due to a virus threat . Kindly refer to the below error details. I have a box with all 3 roles installed I do not have an Edge Server . IO have installed Forefront on the same Box as my exchange Server.Below is the Detail of  the error . Kindly Help
    A virus was found in this message and it has been deleted. For further
    information, please contact technical support for your organization.
    Click here to continue working.
     Copy error details to clipboard
     Show details
    Request
    Url: https://192.168.7.12:443/owa/forms/basic/BasicEditMessage.aspx?ae=Item&t=IPM.Note&a=Reply&id=RgAAAACFMIZq8d7LTqcPs%2bRZA5g%2bBwBDDZWeCojSQZ1bZZ7Ga%2fkWAAAAeCc6AABDDZWeCojSQZ1bZZ7Ga%2fkWAA5iTbjpAAAJ
    User host address: 192.168.7.11
    User: Munendra Pal Gangwar
    EX Address: /o=First Organization/ou=Exchange Administrative Group
    (FYDIBOHF23SPDLT)/cn=Recipients/cn=mp_gangwar
    SMTP Address: [email protected]
    OWA version: 8.1.336.0
    Mailbox server: PFCDELEXCH01.PFCDOMAIN
    Exception
    Exception type: Microsoft.Exchange.Data.Storage.VirusMessageDeletedException
    Exception message: Could not get properties.
    Call stack
    Microsoft.Exchange.Data.Storage.MapiPropertyBag.GetProperties(IList`1
    propertyDefinitions)
    Microsoft.Exchange.Data.Storage.StoreObjectPropertyBag.InternalLoad(PropertyDefinition[]
    properties, Boolean forceReload)
    Microsoft.Exchange.Data.Storage.StoreObjectPropertyBag..ctor(StoreSession
    session, MapiProp mapiProp, Origin origin, PropertyDefinition[]
    autoloadProperties, Boolean canSaveOrDisposeMapiProp)
    Microsoft.Exchange.Data.Storage.StoreObjectPropertyBag..ctor(StoreSession
    session, MapiProp mapiProp, Origin origin, PropertyDefinition[]
    autoloadProperties)
    Microsoft.Exchange.Data.Storage.Item.InternalBindItem(StoreSession
    session, StoreObjectId itemId, Byte[] changeKey, ItemBindOption
    itemBindOption, PropertyDefinition[] allPropsToLoad)
    Microsoft.Exchange.Data.Storage.Item.InternalBind[T](StoreSession
    session, StoreId id, ItemBindOption itemBindOption,
    PropertyDefinition[] allPropsToLoad)
    Microsoft.Exchange.Data.Storage.Item.InternalBind[T](StoreSession
    session, StoreId id, PropertyDefinition[] allPropsToLoad)
    Microsoft.Exchange.Clients.Owa.Core.Utilities.GetItem[T](StoreSession
    storeSession, StoreId storeId, Boolean forceAsMessageItem,
    PropertyDefinition[] prefetchProperties)
    Microsoft.Exchange.Clients.Owa.Core.Utilities.GetItem[T](UserContext
    userContext, StoreId storeId, Boolean forceAsMessageItem,
    PropertyDefinition[] prefetchProperties)
    Microsoft.Exchange.Clients.Owa.Core.Utilities.GetItem[T](UserContext
    userContext, StoreId storeId, PropertyDefinition[] prefetchProperties)
    Microsoft.Exchange.Clients.Owa.Basic.EditMessage.LoadMessage()
    Microsoft.Exchange.Clients.Owa.Basic.EditMessage.OnLoad(EventArgs e)
    System.Web.UI.Control.LoadRecursive()
    System.Web.UI.Page.ProcessRequestMain(Boolean
    includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
    Inner Exception
    Exception type: Microsoft.Mapi.MapiExceptionVirusMessageDeleted
    Exception message: MapiExceptionVirusMessageDeleted: Unable to get
    properties on object. (hr=0x80004005, ec=1294) Diagnostic context:
    Lid: 18969 EcDoRpcExt2 called [length=479] Lid: 27161 EcDoRpcExt2
    returned [ec=0x0][length=422][latency=15] Lid: 23226 --- ROP Parse
    Start --- Lid: 27962 ROP: ropOpenMessage [3] Lid: 17082 ROP Error:
    0x50E Lid: 26977 Lid: 21921 StoreEc: 0x50E Lid: 27962 ROP:
    ropExtendedError [250] Lid: 1494 ---- Remote Context Beg ---- Lid:
    1238 Remote Context Overflow Lid: 14164 StoreEc: 0xFFFFFA1D PropTag:
    0x672D0003 Lid: 8660 StoreEc: 0x8004010F PropTag: 0x672D0003 Lid:
    21970 StoreEc: 0x8004010F PropTag: 0x672D0003 Lid: 23921 StoreEc:
    0x3EC Lid: 21970 StoreEc: 0x8004010F PropTag: 0x672F0014 Lid: 23921
    StoreEc: 0x3EC Lid: 21970 StoreEc: 0x8004010F PropTag: 0x6708000B Lid:
    21970 StoreEc: 0x8004010F PropTag: 0xE960102 Lid: 21970 StoreEc:
    0x8004010F PropTag: 0x6708000B Lid: 21970 StoreEc: 0x8004010F PropTag:
    0xE960102 Lid: 21970 StoreEc: 0x8004010F PropTag: 0x67760102 Lid:
    25394 Lid: 19506 Lid: 27698 Lid: 11285 StoreEc: 0x50E Lid: 21970
    StoreEc: 0xFFFFFC07 PropTag: 0x30080040 Lid: 25818 Lid: 6153 StoreEc:
    0x50E Lid: 25906 Lid: 5249 StoreEc: 0x50E Lid: 1750 ---- Remote
    Context End ---- Lid: 27962 ROP: ropGetPropsSpecific [7] Lid: 17082
    ROP Error: 0x4B9 Lid: 26465 Lid: 21921 StoreEc: 0x4B9 Lid: 27962 ROP:
    ropExtendedError [250] Lid: 1494 ---- Remote Context Beg ---- Lid:
    26426 ROP: ropGetPropsSpecific [7] Lid: 1750 ---- Remote Context End
    ---- Lid: 26849 Lid: 21817 ROP Failure: 0x4B9 Lid: 20385 Lid: 28577
    StoreEc: 0x50E Lid: 32001 Lid: 29953 StoreEc: 0x50E
    Call stack
    Microsoft.Mapi.MapiExceptionHelper.ThrowIfError(String message, Int32
    hresult, Object objLastErrorInfo)
    Microsoft.Mapi.MapiProp.GetProps(PropTag[] propTagsRequested)
    Microsoft.Exchange.Data.Storage.MapiPropertyBag.GetProperties(IList`1
    propertyDefinitions)

    I had this same issue, except I have Symantec mail security not Forefront. It wound up being a line in the adult content filter. For whatever reason, they included "If you received this email" as one of the literal strings. This is probably part
    of almost every corporate confidentiality clause I have ever seen!! go figure......
    Thanks for the event log hint- since I have the adult content set to delete, I had no good tracking mechanism in Exhange or SMSME. I set email notifications for the future on these.
    Brent
    I had this same problem, but I have ESET Mail Security Server. in some one case the problem y solved if I attach the "user@domain" in the "white
    List". But in many case the problem is continuous. I have Exchange 2007 in MS Windows Server 2003.
    Thanks for yours help.

  • Could not get stream for task attachment

    When uploading Document and Trying to view documents in Worklits we get the following error:
    <Error> <oracle.soa.services.workflow.worklist> <BEA-000000> <<oracle.bpel.services.workflow.worklist.servlet.ADFAttachmentHelper.getTaskAttachment>
    Could not get stream for task attachment:
    This seem to have been a bug on previous versions of Oracle BPM but we're receiving it on 11.1.1.7
    Any idea what might be causing this?
    someone that experienced a similar issue but was resolved bu applying a patch
    ID 1453480 - someone that experienced a similar issue but was resolved bu applying a patch
    Thanks

    Complete restart of the environment solved issue

  • "Could not get needed resources for application to be launched (id=-669)"

    I keep getting this message
    Setup Resourses Status
    Could not get needed resources for application [App name. edir path] to
    be launched (id=-669).
    Problem: Unable to connect to server [server name]
    I am able to browse to the server no problem as well as map a drive
    directly to it?
    I am not sure why I am getting this ?

    This is under the "Environment" portion of the "Run Tab"
    Craig Wilson - MCNE, MCSE, CCNA
    Novell Support Forums Volunteer Sysop
    Novell does not officially monitor these forums.
    Suggestions/Opinions/Statements made by me are solely my own.
    These thoughts may not be shared either Novell or any rational human.
    <[email protected]> wrote in message
    news:[email protected]...
    > Craig where do I to determine that? I know it has to run as admin but I
    > am not sure if it is set like that...
    >
    >> Is the application configured to run "Normal", "Secure System User", or
    >> "Unsecure System User".
    >>
    >> Methods #2 and #3 require the workstation not the user to have rights
    > and
    >> require the use of UNC instead of a mapped drive.
    >>
    >> --
    >> Craig Wilson - MCNE, MCSE, CCNA
    >> Novell Support Forums Volunteer Sysop
    >>
    >> Novell does not officially monitor these forums.
    >>
    >> Suggestions/Opinions/Statements made by me are solely my own.
    >> These thoughts may not be shared either Novell or any rational human.
    >>
    >> <[email protected]> wrote in message
    >> news:[email protected]...
    >> > It is associated with the user and I can get access to the exe via
    > their
    >> > PC using their login
    >> >
    >> >> ,
    >> >> > Could not get needed resources for application [App name. edir
    > path]
    >> > to
    >> >> > be launched (id=-669).
    >> >> >
    >> >> > Problem: Unable to connect to server [server name]
    >> >> >
    >> >> > I am able to browse to the server no problem as well as map a drive
    >> >> > directly to it?
    >> >> >
    >> >> -669 is "wrong password" IIRC. Is this app associated to user or WS,
    > ie
    >> > is
    >> >> t trying to access that path wth the User's or Workstation's
    >> > credentials?
    >> >>
    >> >> - Anders Gustafsson, Engineer, CNE6, ASE
    >> >> NSC Volunteer Sysop
    >> >> Pedago, The Aaland Islands (N60 E20)
    >> >>
    >> >> Novell does not monitor these forums officially.
    >> >> Enhancement requests for all Novell products may be made at
    >> >> http://support.novell.com/enhancement
    >> >>
    >> >> Using VA 5.51 build 315 on Windows 2000 build 2600
    >> >>
    >> >
    >>
    >>
    >

  • AM 7.1 CDSSO Could not get agent for the realm

    Hi,
    We are trying to configure the Cookie highjacking fix in AM 7.1 and apache agent 2.2. When we try to go the agent, the browser gets redirected to the Access Manager. After authentication, I get the error message on the browser "resource access denied".
    On the AM side, I get following error in amCDC file:
    04/19/2007 06:19:19:919 PM PDT: Thread[service-j2ee-3,5,main]
    CDCServlet Initializing...
    04/19/2007 06:19:19:922 PM PDT: Thread[service-j2ee-3,5,main]
    CDCServlet init params. Restricted Token Enabled: false Auth URL Cookie Name: sunIdentityServerAuthNServer Auth URL Cookie Domain:Deployment Descriptor: /amserver
    04/19/2007 06:19:19:925 PM PDT: Thread[service-j2ee-3,5,main]
    CDCServlet.doGetPost: Query String received: goto=http%3A%2F%2Feauthdev.etc.net%2Fcgi-bin%2Fprintenv%3FsunwMethod%3DGET&RequestID=15432&MajorVersion=1&MinorVersion=0&ProviderID=http%3A%2F%2Feauthdev.etc.net%3A80%2Famagent&IssueInstant=2007-04-19T18%3A19%3A19Z
    04/19/2007 06:19:19:934 PM PDT: Thread[service-j2ee-3,5,main]
    SSOException caught: com.iplanet.sso.SSOException: Invalid session ID.
    04/19/2007 06:19:20:430 PM PDT: Thread[service-j2ee-3,5,main]
    Forwarding for authentication to: /UI/Login?goto=%2Famserver%2Fcdcservlet%3FTARGET%3Dhttp%253A%252F%252Feauthdev.etc.net%252Fcgi-bin%252Fprintenv%253FsunwMethod%253DGET%26RequestID%3D15432%26MajorVersion%3D1%26MinorVersion%3D0%26ProviderID%3Dhttp%253A%252F%252F
    eauthdev.etc.net%253A80%252Famagent%26IssueInstant%3D2007-04-19T18%253A19%253A19Z
    04/19/2007 06:19:27:293 PM PDT: Thread[service-j2ee-4,5,main]
    CDCServlet.doGetPost: Query String received: TARGET=http%3A%2F%2Feauthdev.etc.net%2Fcgi-bin%2Fprintenv%3FsunwMethod%3DGET&RequestID=15432&MajorVersion=1&MinorVersion=0&ProviderID=http%3A%2F%2Feauthdev.etc.net%3A80%2Famagent&IssueInstant=2007-04-19T18%3A19%3A19Z
    04/19/2007 06:19:27:294 PM PDT: Thread[service-j2ee-4,5,main]
    WARNING: Advice List is : null
    04/19/2007 06:19:27:294 PM PDT: Thread[service-j2ee-4,5,main]
    CDCServlet.doGetPost: targetURL = http://eauthdev.etc.net/cgi-bin/printenv?sunwMethod=GET
    04/19/2007 06:19:27:294 PM PDT: Thread[service-j2ee-4,5,main]
    CDCServlet.doGetPost: gotoURL = http://eauthdev.etc.net/cgi-bin/printenv?sunwMethod=GET
    04/19/2007 06:19:27:321 PM PDT: Thread[service-j2ee-4,5,main]
    CDC Servlet: Directory matches for http://eauthdev.etc.net:80/ is:{AMIdentity object: id=eauthdev_apache_8080,ou=agent,dc=mycompany,dc=com AMSDKDN=uid=eauthdev_apache_8080,ou=agents,dc=mycompany,dc=com={sunidentityserverdevicestatus=[Active], sunidentityserverdevicekeyvalue=[agentRootURL=http://eauthdev.etc.net:80/]}}
    04/19/2007 06:19:27:400 PM PDT: Thread[service-j2ee-4,5,main]
    WARNING: Invalid GoTo URL: http://eauthdev.etc.net/cgi-bin/printenv?sunwMethod=GET for Agent ID: http://eauthdev.etc.net:80/
    04/19/2007 06:19:27:400 PM PDT: Thread[service-j2ee-4,5,main]
    ERROR: CDCServlet.doGetPost:Exception occured
    java.lang.Exception: Invalid Agent: Could not get agent for the realm
    at com.iplanet.services.cdc.LdapSPValidator.validateAndGetRestriction(LdapSPValidator.java:200)
    at com.iplanet.services.cdc.CDCServlet.redirectWithAuthNResponse(CDCServlet.java:288)
    at com.iplanet.services.cdc.CDCServlet.doGetPost(CDCServlet.java:247)
    at com.iplanet.services.cdc.CDCServlet.doGet(CDCServlet.java:194)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:796)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:917)
    at org.apache.catalina.core.ApplicationFilterChain.servletService(ApplicationFilterChain.java:391)
    at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:297)
    at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:178)
    at com.sun.identity.setup.AMSetupFilter.doFilter(AMSetupFilter.java:86)
    at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:210)
    at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:178)
    at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:270)
    at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:241)
    at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:182)
    at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:571)
    at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:160)
    at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:571)
    at com.sun.webserver.connector.nsapi.NSAPIProcessor.process(NSAPIProcessor.java:149)
    at com.sun.webserver.connector.nsapi.NSAPIConnector.service(NSAPIConnector.java:995)
    Does anybody knows what is going wrong?
    Thanks in advance,
    Vivek

    One more thing Vivek : seems like the problem comes from the fact that the there's 3 checks done to ensure the goto URL matches what's in the agent profile, and one of them (the port check) fails.
    agentRootURL has port 80. The gotoURL doesn't.
    Try not specifying a port number for key agentRootURL and tell me if that works.
    Side note : it seems you might not have the following property enabled in your AMConfig.properties :
    com.sun.identity.enableUniqueSSOTokenCookie = true
    HTH,
    N.

  • [java] Failed at "Could not get DeploymentManager".

    I am running the second example in the BPEL Help tutorial. In that we are supposed to run ant from tutorials\127.OrderBookingTutorial\PriceQuote and it gives error because it is not able to resolve
    my PC name 5mq9p91. I changed couple of build.properties files and for hostname put in the IP address, so some of these worked, but some of the places still have 5mq9p91 causing FAILURE.
    Where does ant get my machine name, how I can get it to pull full qualified name or the IP address?
    ERROR:
    [echo] Deploying SelectManufacturingUI using "admin_client.jar deployer:oc4j:opmn://5MQ9P91:6003/home -file C:\HOME\bpel\ProcessManager\product\10.1.3.1\OracleAS_1\bpel\samples\tutorials\127.OrderBookingTutorial\PriceQuote\SelectManufacturingUI/SelectManufacturingUI.ear ..."
    [java] Failed at "Could not get DeploymentManager".
    (1. EXECUTION OF ANT BELOW)
    Actual problem is once I complete this exercise, partner link has compilation error, because the WSDL does not have complete qualified PC name.
    In the WSDL you can see the reference to "soap:address location="http://5MQ9P91:8888/orabpel/default/RapidDistributors/1.0""
    how do I change this to have complete qualified address?
    Actual Error:
    Error:
    [Error ORABPEL-10903]: failed to read wsdl
    [Description]: in "bpel.xml", Error loading schemas from wsdl.
    Error while loading schemas from wsdl file at location "http://11.111.111.11:8888/orabpel/default/RapidDistributors/RapidDistributors?wsdl". The reason is http://5MQ9P91:8888/orabpel/xmllib/ws-addressing.xsd.
    Please verify the schemas defined in wsdl.
    [Potential fix]: If your site has a proxy server, then you may need to configure your BPEL Server, designer and browser with your proxy server configuration settings (see tech note on http://otn.oracle.com/bpel for instructions).
    (2. RapidDistributors WSDL INFO BELOW)
    Few things I did to solve the problem, without much success:
    Installed BPEL and when I use firefox I get DNS Lookup Error
    http://5mq9p91:8888/
    Now if I use http://5mq9p91.na.zzzzz.net:8888/ it works fine and if I use the IP address it works fine.
    Have the same problem with IE, but after putting entried in C:\WINDOWS\system32\drivers\etc\hosts file problem went away.
    I also added DNS Suffix na.zzzzz.com in the Control Panel --> Network --> TCP/IP --> Advanced --> DNS Tab
    (3. IPCONFIG /ALL DETAILS BELOW)
    1. EXECUTION OF ANT
                   C:\HOME\bpel\ProcessManager\product\10.1.3.1\OracleAS_1\bpel\samples\tutorials\127.OrderBookingTutorial\PriceQuote>ant
                   Buildfile: build.xml
                   RapidDistributors:
                   Trying to override old definition of task customize
                   pre-build:
                   validateTask:
                   [echo]
                   [echo] --------------------------------------------------------------
                   [echo] | Validating workflow
                   [echo] --------------------------------------------------------------
                   [echo]
                   [validateTask] Validation of workflow task definitions is completed without errors
                   compile:
                   [echo]
                   [echo] --------------------------------------------------------------
                   [echo] | Compiling bpel process RapidDistributors, revision 1.0
                   [echo] --------------------------------------------------------------
                   [echo]
                   [bpelc] validating "C:\HOME\bpel\ProcessManager\product\10.1.3.1\OracleAS_1\bpel\samples\tutorials\127.OrderBookingTutorial\PriceQuote\RapidDistributors\bpel\RapidDistributors.bpel" ...
                   [bpelc] BPEL suitcase generated in: C:\HOME\bpel\ProcessManager\product\10.1.3.1\OracleAS_1\bpel\samples\tutorials\127.OrderBookingTutorial\PriceQuote\RapidDistributors\output\bpel_RapidDistributors_1.0.jar
                   deployProcess:
                   [echo]
                   [echo] --------------------------------------------------------------
                   [echo] | Deploying bpel process RapidDistributors on 11.111.111.11, port 8888
                   [echo] --------------------------------------------------------------
                   [echo]
                   [deployProcess] Deploying process C:\HOME\bpel\ProcessManager\product\10.1.3.1\OracleAS_1\bpel\samples\tutorials\127.OrderBookingTutorial\PriceQuote\RapidDistributors\output\bpel_RapidDistributors_1.0.jar
                   [deployProcess] Successfully deployed the process "RapidDistributors" on server "11.111.111.11" and port "8888"
                   deployTaskForm:
                   [echo]
                   [echo] --------------------------------------------------------------
                   [echo] | Deploying workflow form for RapidDistributors on 11.111.111.11, port 8888
                   [echo] --------------------------------------------------------------
                   [echo]
                   [deployTaskForm] There are no forms to deploy
                   deployDecisionServices:
                   [echo]
                   [echo] --------------------------------------------------------------
                   [echo] | Deploying decision services for RapidDistributors on 11.111.111.11, port 8888
                   [echo] --------------------------------------------------------------
                   [echo]
                   [deployDecisionServices] There are no decision services to deploy
                   process-deploy:
                   post-build:
                   deploy:
                   SelectManufacturing:
                   Trying to override old definition of task customize
                   pre-build:
                   validateTask:
                   [echo]
                   [echo] --------------------------------------------------------------
                   [echo] | Validating workflow
                   [echo] --------------------------------------------------------------
                   [echo]
                   [validateTask] url is file:/C:/home/bpel/ProcessManager/product/10.1.3.1/OracleAS_1/bpel/system/services/schema/WorkflowTaskDefinition.xsd
                   [validateTask] Validation of workflow task definitions is completed without errors
                   compile:
                   [echo]
                   [echo] --------------------------------------------------------------
                   [echo] | Compiling bpel process SelectManufacturing, revision 1.0
                   [echo] --------------------------------------------------------------
                   [echo]
                   [bpelc] validating "C:\HOME\bpel\ProcessManager\product\10.1.3.1\OracleAS_1\bpel\samples\tutorials\127.OrderBookingTutorial\PriceQuote\SelectManufacturing\bpel\SelectManufacturing.bpel" ...
                   [bpelc] BPEL suitcase generated in: C:\HOME\bpel\ProcessManager\product\10.1.3.1\OracleAS_1\bpel\samples\tutorials\127.OrderBookingTutorial\PriceQuote\SelectManufacturing\output\bpel_SelectManufacturing_1.0.jar
                   deployProcess:
                   [echo]
                   [echo] --------------------------------------------------------------
                   [echo] | Deploying bpel process SelectManufacturing on 11.111.111.11, port 8888
                   [echo] --------------------------------------------------------------
                   [echo]
                   [deployProcess] Deploying process C:\HOME\bpel\ProcessManager\product\10.1.3.1\OracleAS_1\bpel\samples\tutorials\127.OrderBookingTutorial\PriceQuote\SelectManufacturing\output\bpel_SelectManufacturing_1.0.jar
                   [deployProcess] Successfully deployed the process "SelectManufacturing" on server "11.111.111.11" and port "8888"
                   deployTaskForm:
                   [echo]
                   [echo] --------------------------------------------------------------
                   [echo] | Deploying workflow form for SelectManufacturing on 11.111.111.11, port 8888
                   [echo] --------------------------------------------------------------
                   [echo]
                   [deployTaskForm] 07/07/12 09:22:47 Notification ==>Application Deployer for default_SelectManufacturing_1_0_Approval STARTS.
                   [deployTaskForm] 07/07/12 09:22:47 Notification ==>Undeploy previous deployment
                   [deployTaskForm] 07/07/12 09:22:48 Notification ==>Initialize C:\HOME\bpel\ProcessManager\product\10.1.3.1\OracleAS_1\j2ee\home\applications\default_SelectManufacturing_1_0_Approval.ear begins...
                   [deployTaskForm] 07/07/12 09:22:48 Notification ==>Initialize C:\HOME\bpel\ProcessManager\product\10.1.3.1\OracleAS_1\j2ee\home\applications\default_SelectManufacturing_1_0_Approval.ear ends...
                   [deployTaskForm] 07/07/12 09:22:48 Notification ==>Starting application : default_SelectManufacturing_1_0_Approval
                   [deployTaskForm] 07/07/12 09:22:48 Notification ==>Initializing ClassLoader(s)
                   [deployTaskForm] 07/07/12 09:22:48 Notification ==>Initializing EJB container
                   [deployTaskForm] 07/07/12 09:22:48 Notification ==>Loading connector(s)
                   [deployTaskForm] 07/07/12 09:22:48 Notification ==>Starting up resource adapters
                   [deployTaskForm] 07/07/12 09:22:48 Notification ==>Initializing EJB sessions
                   [deployTaskForm] 07/07/12 09:22:48 Notification ==>Committing ClassLoader(s)
                   [deployTaskForm] 07/07/12 09:22:48 Notification ==>Initialize workflowform begins...
                   [deployTaskForm] 07/07/12 09:22:48 Notification ==>Initialize workflowform ends...
                   [deployTaskForm] 07/07/12 09:22:48 Notification ==>Started application : default_SelectManufacturing_1_0_Approval
                   [deployTaskForm] 07/07/12 09:22:48 Notification ==>Application Deployer for default_SelectManufacturing_1_0_Approval COMPLETES. Operation time: 718 msecs
                   [deployTaskForm] Successfully deployed form on server "11.111.111.11"
                   deployDecisionServices:
                   [echo]
                   [echo] --------------------------------------------------------------
                   [echo] | Deploying decision services for SelectManufacturing on 11.111.111.11, port 8888
                   [echo] --------------------------------------------------------------
                   [echo]
                   [deployDecisionServices] There are no decision services to deploy
                   process-deploy:
                   post-build:
                   deploy:
                   SelectManufacturingUI:
                   Trying to override old definition of task customize
                   deploy:
                   [echo] Deploying SelectManufacturingUI from C:\HOME\bpel\ProcessManager\product\10.1.3.1\OracleAS_1\bpel\samples\tutorials\127.OrderBookingTutorial\PriceQuote\SelectManufacturingUI:
                   [echo]
                   schemac:
                   build_ear:
                   [jar] Building jar: C:\HOME\bpel\ProcessManager\product\10.1.3.1\OracleAS_1\bpel\samples\tutorials\127.OrderBookingTutorial\PriceQuote\SelectManufacturingUI\SelectManufacturingUI.war
                   [ear] Building ear: C:\HOME\bpel\ProcessManager\product\10.1.3.1\OracleAS_1\bpel\samples\tutorials\127.OrderBookingTutorial\PriceQuote\SelectManufacturingUI\SelectManufacturingUI.ear
                   deployOc4j:
                   deployBindWebAppOc4j:
                   deployIas_10gR2:
                   deployBindWebAppIas_10gR2:
                   deployIas_10gR3:
                   [echo] Deploying SelectManufacturingUI using "admin_client.jar deployer:oc4j:opmn://5MQ9P91:6003/home -file C:\HOME\bpel\ProcessManager\product\10.1.3.1\OracleAS_1\bpel\samples\tutorials\127.OrderBookingTutorial\PriceQuote\SelectManufacturingUI/SelectManufacturingUI.ear ..."
                   [java] Failed at "Could not get DeploymentManager".
                   [java] This is typically the result of an invalid deployer URI format being supplied, the target server not being in a started state or incorrect authentication details being supplied.
                   [java] More information is available by enabling logging -- please see the Oracle Containers for J2EE Configuration and Administration Guide for details.
                   [java] Java Result: 1
                   deployBindWebAppIas_10gR3:
                   [echo] Binding WebAp SelectManufacturingUI using "admin_client.jar deployer:oc4j:opmn://5MQ9P91:6003/home ..."
                   [java] Failed at "Could not get DeploymentManager".
                   [java] This is typically the result of an invalid deployer URI format being supplied, the target server not being in a started state or incorrect authentication details being supplied.
                   [java] More information is available by enabling logging -- please see the Oracle Containers for J2EE Configuration and Administration Guide for details.
                   [java] Java Result: 1
                   deployBindWebAppIas:
                   deployOraclej2ee:
                   deployNonOraclej2ee:
                   [delete] Deleting: C:\HOME\bpel\ProcessManager\product\10.1.3.1\OracleAS_1\bpel\samples\tutorials\127.OrderBookingTutorial\PriceQuote\SelectManufacturingUI\SelectManufacturingUI.war
                   [delete] Deleting: C:\HOME\bpel\ProcessManager\product\10.1.3.1\OracleAS_1\bpel\samples\tutorials\127.OrderBookingTutorial\PriceQuote\SelectManufacturingUI\SelectManufacturingUI.ear
                   CreateOrderBookingUI:
                   Trying to override old definition of task customize
                   deploy:
                   [echo] Deploying CreateOrderBookingUI from C:\HOME\bpel\ProcessManager\product\10.1.3.1\OracleAS_1\bpel\samples\tutorials\127.OrderBookingTutorial\PriceQuote\CreateOrderBookingUI/jsp:
                   [echo]
                   schemac:
                   build_ear:
                   [jar] Building jar: C:\HOME\bpel\ProcessManager\product\10.1.3.1\OracleAS_1\bpel\samples\tutorials\127.OrderBookingTutorial\PriceQuote\CreateOrderBookingUI\CreateOrderBookingUI.war
                   [ear] Building ear: C:\HOME\bpel\ProcessManager\product\10.1.3.1\OracleAS_1\bpel\samples\tutorials\127.OrderBookingTutorial\PriceQuote\CreateOrderBookingUI\CreateOrderBookingUI.ear
                   deployOc4j:
                   deployBindWebAppOc4j:
                   deployIas_10gR2:
                   deployBindWebAppIas_10gR2:
                   deployIas_10gR3:
                   [echo] Deploying CreateOrderBookingUI using "admin_client.jar deployer:oc4j:opmn://5MQ9P91:6003/home -file C:\HOME\bpel\ProcessManager\product\10.1.3.1\OracleAS_1\bpel\samples\tutorials\127.OrderBookingTutorial\PriceQuote\CreateOrderBookingUI/CreateOrderBookingUI.ear ..."
                   [java] Failed at "Could not get DeploymentManager".
                   [java] This is typically the result of an invalid deployer URI format being supplied, the target server not being in a started state or incorrect authentication details being supplied.
                   [java] More information is available by enabling logging -- please see the Oracle Containers for J2EE Configuration and Administration Guide for details.
                   [java] Java Result: 1
                   deployBindWebAppIas_10gR3:
                   [echo] Binding WebAp CreateOrderBookingUI using "admin_client.jar deployer:oc4j:opmn://5MQ9P91:6003/home ..."
                   [java] Failed at "Could not get DeploymentManager".
                   [java] This is typically the result of an invalid deployer URI format being supplied, the target server not being in a started state or incorrect authentication details being supplied.
                   [java] More information is available by enabling logging -- please see the Oracle Containers for J2EE Configuration and Administration Guide for details.
                   [java] Java Result: 1
                   deployBindWebAppIas:
                   deployOraclej2ee:
                   deployNonOraclej2ee:
                   [delete] Deleting: C:\HOME\bpel\ProcessManager\product\10.1.3.1\OracleAS_1\bpel\samples\tutorials\127.OrderBookingTutorial\PriceQuote\CreateOrderBookingUI\CreateOrderBookingUI.war
                   [delete] Deleting: C:\HOME\bpel\ProcessManager\product\10.1.3.1\OracleAS_1\bpel\samples\tutorials\127.OrderBookingTutorial\PriceQuote\CreateOrderBookingUI\CreateOrderBookingUI.ear
                   deploy:
                   BUILD SUCCESSFUL
                   Total time: 50 seconds
                   C:\HOME\bpel\ProcessManager\product\10.1.3.1\OracleAS_1\bpel\samples\tutorials\127.OrderBookingTutorial\PriceQuote>
    2. RapidDistributors WSDL INFO
         http://11.111.111.11:8888/orabpel/default/RapidDistributors/RapidDistributors?wsdl
              <?xml version="1.0" encoding="UTF-8" ?>
              - <definitions name="RapidDistributors" targetNamespace="http://xmlns.oracle.com/RapidDistributors" xmlns="http://schemas.xmlsoap.org/wsdl/" xmlns:tns="http://xmlns.oracle.com/RapidDistributors" xmlns:wsa="http://schemas.xmlsoap.org/ws/2003/03/addressing" xmlns:ns1="http://www.globalcompany.com/ns/sales" xmlns:plnk="http://schemas.xmlsoap.org/ws/2003/05/partner-link/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:client="http://xmlns.oracle.com/RapidDistributors">
              - <types>
              - <schema attributeFormDefault="qualified" elementFormDefault="qualified" targetNamespace="http://xmlns.oracle.com/RapidDistributors" xmlns="http://www.w3.org/2001/XMLSchema">
              - <element name="RapidDistributorsProcessRequest">
              - <complexType>
              - <sequence>
              <element name="input" type="string" />
              </sequence>
              </complexType>
              </element>
              - <element name="RapidDistributorsProcessResponse">
              - <complexType>
              - <sequence>
              <element name="result" type="string" />
              </sequence>
              </complexType>
              </element>
              </schema>
              - <schema xmlns="http://www.w3.org/2001/XMLSchema">
              <import namespace="http://www.globalcompany.com/ns/sales" schemaLocation="OrderBookingPO.xsd" />
              </schema>
              - <schema xmlns="http://www.w3.org/2001/XMLSchema">
              <import namespace="http://schemas.xmlsoap.org/ws/2003/03/addressing" schemaLocation="http://5MQ9P91:8888/orabpel/xmllib/ws-addressing.xsd" />
              </schema>
              </types>
              - <message name="RapidDistributorsResponseMessage">
              <part name="payload" element="ns1:SupplierInfo" />
              </message>
              - <message name="RapidDistributorsRequestMessage">
              <part name="payload" element="ns1:OrderItems" />
              </message>
              - <message name="WSAMessageIDHeader">
              <part name="MessageID" element="wsa:MessageID" />
              </message>
              - <message name="WSAReplyToHeader">
              <part name="ReplyTo" element="wsa:ReplyTo" />
              </message>
              - <message name="WSARelatesToHeader">
              <part name="RelatesTo" element="wsa:RelatesTo" />
              </message>
              - <portType name="RapidDistributorsCallback">
              - <operation name="onResult">
              <input message="tns:RapidDistributorsResponseMessage" />
              </operation>
              </portType>
              - <portType name="RapidDistributors">
              - <operation name="initiate">
              <input message="tns:RapidDistributorsRequestMessage" />
              </operation>
              </portType>
              - <binding name="RapidDistributorsBinding" type="tns:RapidDistributors">
              <soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http" />
              - <operation name="initiate">
              <soap:operation style="document" soapAction="initiate" />
              - <input>
              <soap:header message="tns:WSAReplyToHeader" part="ReplyTo" use="literal" encodingStyle="" />
              <soap:header message="tns:WSAMessageIDHeader" part="MessageID" use="literal" encodingStyle="" />
              <soap:body use="literal" />
              </input>
              </operation>
              </binding>
              - <binding name="RapidDistributorsCallbackBinding" type="tns:RapidDistributorsCallback">
              <soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http" />
              - <operation name="onResult">
              <soap:operation style="document" soapAction="onResult" />
              - <input>
              <soap:header message="tns:WSARelatesToHeader" part="RelatesTo" use="literal" encodingStyle="" />
              <soap:body use="literal" />
              </input>
              </operation>
              </binding>
              - <service name="RapidDistributorsCallbackService">
              - <port name="RapidDistributorsCallbackPort" binding="tns:RapidDistributorsCallbackBinding">
              <soap:address location="http://set.by.caller" />
              </port>
              </service>
              - <service name="RapidDistributors">
              - <port name="RapidDistributorsPort" binding="tns:RapidDistributorsBinding">
              <soap:address location="http://5MQ9P91:8888/orabpel/default/RapidDistributors/1.0" />
              </port>
              </service>
              - <plnk:partnerLinkType name="RapidDistributors">
              - <plnk:role name="RapidDistributorsProvider">
              <plnk:portType name="tns:RapidDistributors" />
              </plnk:role>
              - <plnk:role name="RapidDistributorsRequester">
              <plnk:portType name="tns:RapidDistributorsCallback" />
              </plnk:role>
              </plnk:partnerLinkType>
              </definitions>
    3. IPCONFIG /ALL DETAILS
                   C:\>ipconfig /all
                   Windows IP Configuration
                        Host Name . . . . . . . . . . . . : 5MQ9P91
                        Primary Dns Suffix . . . . . . . : na.zzzzz.net
                        Node Type . . . . . . . . . . . . : Hybrid
                        IP Routing Enabled. . . . . . . . : No
                        WINS Proxy Enabled. . . . . . . . : No
                        DNS Suffix Search List. . . . . . : na.zzzzz.net
                                            na.zzzzz.net
                                            zzzzz.net
                   Ethernet adapter Local Area Connection:
                        Connection-specific DNS Suffix . : na.zzzzz.net
                        Description . . . . . . . . . . . : Broadcom NetXtreme 57xx Gigabit Controller
                        Physical Address. . . . . . . . . : 00-13-72-BA-E2-DF
                        Dhcp Enabled. . . . . . . . . . . : Yes
                        Autoconfiguration Enabled . . . . : Yes
                        IP Address. . . . . . . . . . . . : 11.111.111.11
                        Subnet Mask . . . . . . . . . . . : 255.255.255.0
                        Default Gateway . . . . . . . . . : 13.141.178.1
                        DHCP Server . . . . . . . . . . . : 13.135.65.50
                        DNS Servers . . . . . . . . . . . : 13.135.0.11
                                            13.135.0.13
                                            13.151.1.16
                        Primary WINS Server . . . . . . . : 13.135.65.50
                        Secondary WINS Server . . . . . . : 13.151.32.32
                        Lease Obtained. . . . . . . . . . : Wednesday, July 11, 2007 6:02:29 PM
                        Lease Expires . . . . . . . . . . : Monday, July 16, 2007 6:02:29 PM
                   Ethernet adapter {4AC576C8-F05E-422F-BA75-A986D1994DDF}:
                        Connection-specific DNS Suffix . :
                        Description . . . . . . . . . . . : Nortel IPSECSHM Adapter - Packet Scheduler Miniport
                        Physical Address. . . . . . . . . : 44-45-53-54-42-00
                        Dhcp Enabled. . . . . . . . . . . : No
                        IP Address. . . . . . . . . . . . : 0.0.0.0
                        Subnet Mask . . . . . . . . . . . : 0.0.0.0
                        Default Gateway . . . . . . . . . :
                   C:\>

    Solution:
    C:\HOME\bpel\ProcessManager\product\10.1.3.1\OracleAS_1\bpel\utilities\ant-orabpel.properties
    changed hostname and put in the IP Address, and this worked.
    But now that I run ANT it still has the "Could not get DeploymentManager" problem, so it was not because of machine name translation.
    so now what?
    more over, actual problem is to fix the WSDL file:
    "http://11.111.111.11:8888/orabpel/default/RapidDistributors/RapidDistributors?wsdl".
    If WSDL file is fixed my tutorial example may work....
    Any body...please help!!!!

  • "could not get an output file for the document (error RWI 00314)"

    Hi
    We are getting the following error when running the Webi Reports "could not get an output file for the document (error RWI 00314)". The issue seems to be related to Tomcat Memory Heap size, our Tomcat Java heap Size is 1024MB. We were able to resolve  the issue by restarting the Tomcat. We cannot restart the Tomcat in Prod if this is happening frequently.
    Can some one please suggest  any other solution other than restarting the Tomcat frequently, our platform is BOBJ XI 3.1 SP3 with FP 3.1 our Wndows OS is 32 Bit.
    Thank's for your help

    Hi Sreeram,
    Earlier i also faced same kind of problem.
    To solve this kind of problems you need to shutdown the server.
    second thing is when patches missed that time also you will get this kind of problem.
    check j2ee connection is it properly working or not?
    Regards,
    samar reddy.

  • Google cloud print for officejet pro 8600 - could not get printer information from hp.

    I just purchased a new OfficeJet Pro 8600 today. Everything seems to work great except for the connector to Google Cloud Print. I can print from AirPrint, as well as emails to the hpeprint.com address, but when I try to register via the google site, I receive the "could not get printer information from HP" error message.
    The printer is connected via wireless ethernet, and seems to work find otherwise. I have no restrictions on who can send print jobs, and I have changed the email address for hpeprint.com a few times, as suggested in other forum threads, but it can never connect to the the Cloud Print service. I am at the latest firmware level listed on the HP website. I have tried to initiate the connection from multiple PC's as well as multiple web browsers.
    This was a big factor in purchasing this printer. Help anyone?
    This question was solved.
    View Solution.

    Hey rch33k, I am sorry for the ongoing issue that you are having accessing Google Cloud Print. This is being looked into as this is not a singular issue and is affecting other customers as well.  Engineers are currently investing this problem to try and provide a solution to it.  I want to again apologize and thank you all for your patience in this matter.  They only other thing to attempt at this time is to contact Google for further assistance to see if anything can be done on their end. Hopefully this will be fixed quickly
    I am a former employee of HP...
    How do I give Kudos?| How do I mark a post as Solved?

  • Security Agent: Could not get the user record from OpenDirectory

    Hi,
    Two months ago I had to change my SSD due to a damage at the old one. In the Apple shop they installed OS X Lion with a image from their image-server.
    After that the Mac was quite slow in booting. With the old SSD (128 GB) booting takes 25 sec now it takes 75 sec.
    I tried different things to solve the problem without result. First I asked in the shop, then I googled the problem all with no real solution.
    Today now I searched in the log files. I found the following:
    09.02.12 11:03:07.861 SecurityAgent: Could not get the user record from OpenDirectory.
    09.02.12 11:03:07.861 SecurityAgent: Will sleep 3 seconds and try again (retryCount = 10)
    09.02.12 11:03:34.907 SecurityAgent: Could not get the user record from OpenDirectory.
    09.02.12 11:03:34.907 SecurityAgent: Will sleep 3 seconds and try again (retryCount = 1)
    09.02.12 11:03:34.907 SecurityAgent: Will sleep 3 seconds and try again (retryCount = 1)
    09.02.12 11:03:38.653 WindowServer: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
    09.02.12 11:03:58.245 SecurityAgent: User info context values set for andi
    09.02.12 11:03:58.246 SecurityAgent: User info context values set for andi
    09.02.12 11:03:58.356 SecurityAgent: Login Window login proceeding
    09.02.12 11:03:58.356 SecurityAgent: Login Window login proceeding
    This operation takes 30 secs during the boot process. Can somebody help me, to solve this problem?
    Regards
    Andreas
    MacBook Pro, Mid 2009
    2.66 GHz Intel Core 2 Duo
    8GB 1067 MHz DDR3
    SAMSUNG SSD 830 Series , 256 GB
    OS X 10.7.3

    cece2bali wrote: "it seems that your mac tries to connect to a server while booting. This action will erase all your network configuration..."
    Where can I go to learn more about this 'erasure' of network configuration if the mac tries to connect to a server while booting?
    I get the same error message as the OP. My account is an Admin on the machine. It's configured to automatically log in on boot -- except sometimes it fails. It has a login-item which runs a bash script that makes an https request to a nearby machine. Maybe I should make this script sleep a while so the https action happens after the boot sequence is done? (unlike SmashHuevo, my user needs to be an Admin)

  • Could not get DeploymentManager during SOA install

    I am getting the following error:
    *Could not get DeploymentManager
    This is typically the result of an invalid deployer URI format being supplied, the target server not being in a started state or incorrect authentication details being supplied. More information is available by enabling logging -- please see the Oracle Containers for J2EE Configuration and Administration Guide for details.*
    during the SOA install. I am installing 10.1.3.1 and then I was going to patch it to 10.1.3.3. I am installing it on a Windows XP and ironic thing is it has been installed once on this machine without any errors. I started tinkering with some configuration files so I can process large ESB input files and the metadata repository got hosed. I then went to install it again but started getting this error. I am not doing anything differently from the previous successful installation. Issues like these and others in Oracle SOA is forcing our company to seriously start looking at alternatives.
    Thanks for any help.

    Are you sure you have setup the connectivity correctly in JDev. If you have not removed the previous install correctly it could have held on to the ports, therefore the second install does not use the default.
    Things to check is the oc4j container, and the port. Also perform a test to ensure all things are connecting correctly.
    cheers
    James

  • Checking for file conflicts: could not get filesystem information

    When I try to install a new package with pacman 4 I got the following warning just after pacman has done "checking for file conflicts":
    warning: could not get filesystem information for /var/lib/ntp/etc/resolv.conf (deleted): No such file or directory
    After the warning message is printed, the installation continues normally.  This warning message has never shown up before.
    I have ntpd running in a chroot as a non-root user (instructions).
    I am wondering if anyone else gets the same warning message and if this 'problem' can be solved.
    I forgot to say: the file is still there according to ls and is not empty, but the contents differs form the /etc/resolv.conf-file.
    tim@tim-notebook:~$ cat /var/lib/ntp/etc/resolv.conf && echo && cat /etc/resolv.conf
    # Generated by NetworkManager
    # Generated by NetworkManager
    nameserver 192.168.1.1
    Last edited by timothy (2012-01-19 00:15:51)

    I'm not sure how to do that or I do not know exactly what you mean.
    tim@tim-notebook:~$ pkgfile -gs "*etc/resolv.conf"
    core/filesystem
    extra/archboot
    But you probably already knew that.
    Running pacman with the --debug option did not gave me any more clues.  All I know now, is that this message is printed when the moundpoints are examined:
    stderr 'pacman -Syu--debug' output wrote:(...)
    debug: checking possible conflict: /var/lib/
    debug: file is a directory, not a conflict
    debug: checking available disk space
    warning: could not get filesystem information for /var/lib/ntp/etc/resolv.conf (deleted): No such file or directory
    debug: mountpoint: /var/lib/ntp/proc
    debug: mountpoint: /var/lib/ntp/lib
    debug: mountpoint: /var/lib/ntp/etc/services
    debug: mountpoint: /tmp

Maybe you are looking for