[SOLVED] network does not work at bootup

the only way i can get the network to work is by doing dhcpcd eth0 at root. how to set it up so that it works at bootup?
Last edited by stevestark (2010-08-24 22:31:18)

http://wiki.archlinux.org/index.php/Beginners'_Guide#NETWORKING_Section

Similar Messages

C7 Social Network does not work!

My nokia C7 social network does not work.
After log in my nokia account,it does not appear facebook&Twitter.it just empty
How to solve it?

Did you try reinstalling Nokia Social? Which version is installed in your phone? Try the latest one http://betalabs.nokia.com/apps/nokia-social-1-3?req=true
If you want to thank someone, just click on the blue star at the bottom of their post

Wrt610n wireless network does not work after firmeware upgrade

Hi
I just updated my Wrt610n hardware version 1 to the newest firmware, it did finish with sucess, I did factory reset reboot and reconfig. But the wireless network does not work , cant connect computers to it. Did downgrade the firmware to the same it was and restore my settings but still wireless does not work. But router works fine with lan. Any suggestions? maybe the firmware tosted the router?
Regards
Stefan

Update -
After last reset and reupgrade with the newest firmware for hardware version 1 I could config the router and connect 2 computers with wireless - but only for about 15 mín - then they lost connection and could not reconnect.
I did then get the newest update for hardeware version 2 - just to try and upgraded with that and got success, and now I have reset the router again and config it and those 2 computers are connected and have been for 1 hour now. So seems to be working - is it okay to have the firmware for hardware version 2 on my version 1 router?
Any thought what is going on - could it be that the other firmware had not loaded compleytle or?

Primary network does not work, guest network does work

I updated the firmware on the Time Capsule, after which we had a power outage. When the Time Capsule came back up, after a bunch of fiddling around we discovered that although the primary network cannot connect the Internet through our phone system router, the guest network works fine. The primary network does not work with the guest network turned off. Resetting the Time Capsule had no effect.

After an entire day of messing around, we went into Airport Utility, selected Internet, selected DHCP, and changed DHCP Beginning Address to match the one showing on the guest network (172.16). Now the primary network can see the Internet.

Network does not work or the network signal attenuates rapidly

Network does not work or the network signal attenuates rapidly

Hello shishir_teamo,
If you are having issues with Wi-Fi on you iPhone 4S, check the following article that will help troubleshoot the issue.
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Thanks for using Apple Support Communities.
Regards,
-Norm G.

HT1695 Wi-Fi to your iPhone does not work with the knowledge that I have worked Restart for the same purpose network does not work What is the solution please help as soon as

Wi-Fi to your iPhone does not work with the knowledge that I have worked Restart for the same purpose network does not work What is the solution please help as soon as

Okay, the Wi-Fi doesn't work. Turn it on.
Beyond that, we cannot offer any other assistance as you've failed to provide useful details of the problem.
When responding, post in your native language as your English makes very little sense.

Solved rEFInd does not work after update

Hello.
Today, I updated rEFInd with yaourt.
After the update, I copied the new files in /boot/efi.
I rebooted and now rEFInd does not work.
The only message I got is:
rEFInd - Initializing
After 2-3 minutes, the computer reboots and I got the same error message.
To boot, I had to use the UEFI shell.
First of all, is there a log file for rEFInd?
It is not easy at all to debug it when we don't have any error messages.
After that, I did the procedure to install rEFInd in /boot/efi twice without any success.
Do you know what to do to solve my problem?
Thanks for your help.
Last edited by antoyo (2012-11-07 23:29:55)

@antoyo: The old one is compiled using gnu-efi-libs, the new one is compiled using Tianocore UDK2010.
Full package: http://dl.dropbox.com/u/9710721/refind- … pkg.tar.xz
Src package: http://dl.dropbox.com/u/9710721/refind- … src.tar.gz (will compile only in x86_64 system)

SWP 6.4 install on second computer in wifi WIN 7 network does not work for me.

Installed on my desktop, works fine. Installed on my Laptop, does not work.
As administrator I see the clip window, can open and close it but no menu, so I cannot use it.
As user the switch in the toolbar is there but it does not activate the clip window.
On both machines the OS is Win 7 Home Premium, the printer is the Smart 109B. Printing through Wifi to my printer which is attached to my desktop as a USB-printer works fine. But i take it the real printing is not involved in working with SWP. Maybe networking but I cannot find any hint. Pse help me.
Henk

Hi Tomasz,
as I figured out, this problem is related to the usage or measurement of the InDesign-document at least for me.
I create two portrait-oriented InDesign Layouts.
For the first I choose Print-usage in the New Document-dialog.
For the second I choose Web-usage in the New Document-dialog.
The first will render as bitmap (wrong).
The second will render as PDF (correct).
Folio- and Article-Image-Type is set to PDF in both cases.
Strange behavior.
Regards
Ingo
Am 06.09.2011 um 15:52 schrieb Tomasz Kuczborski:
OK. Ingo, have a look:
attached below is what you see whenever you create new article. So, if you create 10 articles, you have 10 opportunities to set the rendering intent differently. I think this is wrong, as the image format setting applies to the whole folio. Or maybe it has changed recently? If not, the least what should happen is a warning, that your new choice changes the actual setting.
Cheers,
Tomek
http://forums.adobe.com/servlet/JiveServlet/showImage/81969/ScreenShot2011-09-06at15.46.58.png
>

I have just upgraded to Lion and I now find that my VPN network does not work properly. It worked fine with Leopard.

I have just upgraded to Lion and now my VPN connection does not work properly. It was working fine when I was using Leopard. The VPN is My Private Network and we use it to link to BBC iPlayer when abroad. It will actually connect to the VPN site and shows a UK IP address, but then when we try to load an iPlayer programme we get the message from the BBC that we are not in the country and, therefore, cannot access the site. Any suggestions?

Have a look at System Preferences, Accessibility, VoiceOver.
(Command - F5).
charlie

Guest network does not work

Hi
I have latest Airport Extreme with 2TB hard disk (Time Capsule). I have working private network after latest firmware update (7.7.2 here) except my guest network. I have tried to setup the guest network as open network and WPA/WPA2 network with password but it does not work.
I can see the guest network but when I try to connect to it the connection does not work (= there is no internet connection or I cannot connect at all). Private network works fine (WPA2 Personal). Router mode is off (bridged network).
Any ideas how to get it work?

Router mode is off (bridged network).
Any ideas how to get it work?
The TC will nor produce a working guest network without being in Router mode.. ie DHCP + NAT.. you will not get it working in bridge.. it tricks you.. it looks so like it is going to work.. but no. it cannot.
You must rearrange your network so the TC is main router..
Or
IMHO the easier way is to go and buy a cheap wireless router.. a $35 tp-link etc.. and simply use that as AP. It is cheaper, easier and much faster.. guest network is still adding clients to the same wireless.. whereas setting up a second AP allows you to have an entirely separate connection.

WEP network does not work

After upgrade to Snow Leopard, I tried to connect to my home network. It uses plain WEP key (ASCII key, not a "password").
My network at work uses WPA and after upgrade, it just worked, I did not have to set any keys or anything.
Home network with WEP does not work. I see it, but I can't connect. I tried deleting and creating the network again in preferences. I'm sure it's 128-bit ascii key, it has to be exactly 13 characters. The network then uses DHCP and works on all other computers. I can't change to WPA, because I have a wifi-connected printer without WPA support.
Any idea what could have changed after upgrade to Snow Leopard? I never had any problems with that network when using 10.5.

The desired network can be the only network in the list of networks
When you click on the desired network you are prompted for a WEP key.
When you enter the key, the "failed to connect" shows up in the lower left corner of the dialog.
The key was verified by two others in the room who were able to get on using the same key (one on a dell, one on an hp.)
The network is inside a stone building so there is very little outside interference. The same laptop was able to connect to the same network last week before the upgrade to snow leopard.
My wifes 2006 Macbook pro is unable to connect to open networks and looses our time capsule network several times a day even though it is in the same room less than 10 feet from the time capsule and has all bars lit up. This is all happening the very next day after a Snow Leopard upgrade.
What ever changed in snow leopard, made the wireless worse. Is there a way to get the old wireless drivers back?
Thanks for your Help
Rob

Printersharing over my local network does not work anymore

I cannot figure it out.
'all of a sudden' (so it seems) my 2 printers in my network do not print printjobs from other macs in my network. It dit work. Nothing really changed, exept some system-updates.
print-share is on, awake out of sleep is on (network-tab). Really there is no reason that it would not work.
Still, ... it doesn't.
config:
- imac 27" 2011, software updated
- macmini 2010, software updated
canon ip4200, works standard on imac.
brother HL-2030, works standard on imac
The charm of the set-up was that I could have my printers in the office and still print from the livingroom (mac mini)
To try to solve the problem I moved the mac mini temporarily to the office, so I have it next to the imac.
Opening the section 'printers and scanners' and then pressing the '+' does however give me 2 differentviews:
- on the imac I get a sub menu, dropping down from the '+'
- on the mac mini I get a new window named 'add new printer' (this is hopefully the right translation - I am on a Dutch system)
This strikes me as odd. I never noticed this before. Maybe this is where the problem lies?
Anyone, Please???
thanks,
Jo

I did that. I think I did all I could think of: restart macs, adsl-router, the only place I did not look was my switch.
I use this thing because the build-in router in de ADSL-'modem' is 'only' 10/100 Mb. I want full use of my LAN, so I bought a switch. (I have a NAS for photo's, video and itunes. It is still awaiting to be used fully, but that is another matter).
I just solved the problem partly. ...
I just found out that the mac-mini was attached to the router, and the imac to the switch. I just connected both to the switch which solved the problem. Also connecting them to the router solved the problem.
So, ... my next question would be: is bonjour using a special port on my router that I should open, or is there some other reason possible? (... it has a build-in firewall ...)
It appears to be that the problem lies in the communication between the router and the switch.
... Just checked that, ... and it seems to work.
So next analysis would be ... bad connection? loose cable/connector/etc?

File & folder sharing with privileges on my network does not work. What is wrong?

My Timecapsule is creating a network between my iMac with OS 10.7.5 and my Macbook Pro Retina OS 10.9.2. I am trying to setup a folder on my iMac with controlled access privileges to work as a server for others using the Macbook as a client. I followed different tutorials to the letter, but it did not work, I could not get the connection. Then I called the Apple help line. It turns out that just setting it up with a 'sharing only' account etc. in 'sharing ' in the 'system preferences' is not enough. One also has to set up the same priviliges in the 'get info' window of the folder directly at the same time...so a double setup. They could not explain properly why and there is no mention of this whatsoever in any tutorial I found on the internet. Anyway, I tried that and it still did not work. When I add the user in the 'get info' window and press enter, suddenly the user does not show up in the privilege box with the user name but instead a line saying something like "searching for user" and something small dudeling next to it......I called Apple again. After two agonizing hours on the phone where I was treated like an imbecile it turns out one has to somehow go through the address book ??? Why, I have no clue and how, I do not remember, but suddenly it worked.
Anyway, now two month later I had to add a new user account to my Macbook and I need to give it access to my server folder on my iMac. Well same problem again. I cannot remeber what we did 2 month ago an cannot call Apple, because my service period has expired. I tried myself and got the dudle in the folders 'get info' window again. Then by mistake I deleted myself as the only administrator account on the Imac from the access privileges to that shaered server folder. When I tried to put my account back into the folders privilege settings I got the same message and the dudeling thingy there too. Frustrated I thought it is best to just re-start the computer.......that was the end of it all: Now the startup window does not show my account name and icon anymore, just two lines to fill in the account name and password. The upper line has an arrow pointing left, the lower for the password an arrow pointing right. I filled in the account name and the password....the dudle circle comes and nothing happens, it seems to crash. When I click on the arrows the sign-in lines disappear, only the three buttons for going to sleep, re-start and turn off at the bottom are the only items left on the screen. I tried 10 times to no avail. This is turning into a nightmare!! My account is the only user account on this iMac.......
What am I doing wrong? Or what is wrong with my iMac?
Why is there nothing mentioned about these issues in the tutorials or anywhere else? Why do the tutorials say it is so easy, when even the staff on Apple's helpline cannot figure it out without having lengthy side conferences with their co-workers and managers???
Does anybody know what I have to do again with the address book to add this external 'sharing only' user account to the folder's privilege settings?
I assumme I have to re-boot my computer tomorrow and restore it from the Time Capsule. How do I do that? I cannot log in????
With the setup I had working for the last two month there were still issues with acces conflict to new subfolders and files inside the shared folder between me and the Macbook account user. I have read that the solution is to create a group and give the group access privileges to the folder. However, I could not find any details on the exact steps to follow. I need the exact steps, otherwise this will turn into the next nightmare. Where can I find this info.
I would really appreciate your help with answers and solutions to these complex issues
Thank you

check out managed datasources in the manuals

Find via network does not work

Hi..I´m having a big trouble when trying to find images by it´s keywork when they are stored in my company server. Let´s explain
I take some photos or even work with Photoshop, Illustrator or InDesign files. I set different keyword for the files and move it to a central folder in my server, where everyone inside the company has acess.
The problem is: Nobody is able to find that images...In Adobe Bridge (Cs3 or CS4) they go Edit > Find, set the criteria and run the search > not done. The unique person able to find that images by searching via keywork is myself inside my own computer (the one I´ve set files´ keywords)
I´ve tried everithing, check options in find dialog box, triing to centralize a cache folder in server and pointing all the bridges to that folders, purge and export cache to folders, and so on, but I do not know if it´s anything related to cache.
In Resume, nobody is able to find images by any criteria if they are stored inside server (just the people that set keyword is able).
How to solve it?
Thank you a lot
Gustavo.

This question has been asked many times, but no one responds back as how they solved the problem.
Seen this recent link. It sounds like you have tried suggestions at end of post #1, and it did not work.
If you find something that does work please post back to help others.
http://forums.adobe.com/thread/556836?tstart=0
Message was edited by: Curt Y
Note: No files will be found unless the folders are indexed.

[SOLVED] Microphone does not work after fresh install

Hello all,
I just installed arch a week or so ago, everything is great except from
the fact that my microphone does not seem to work (at least with
skype)..
This is the output of amixer:
[jorge@flamingo ~]$ amixer
Simple mixer control 'Master',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum
Playback channels: Mono
Limits: Playback 0 - 64
Mono: Playback 57 [89%] [-5.25dB] [on]
Simple mixer control 'Headphone',0
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 64
Mono:
Front Left: Playback 64 [100%] [0.00dB] [on]
Front Right: Playback 64 [100%] [0.00dB] [on]
Simple mixer control 'Headphone',1
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 64
Mono:
Front Left: Playback 64 [100%] [0.00dB] [on]
Front Right: Playback 64 [100%] [0.00dB] [on]
Simple mixer control 'PCM',0
Capabilities: pvolume penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 255
Mono:
Front Left: Playback 183 [72%] [-14.40dB]
Front Right: Playback 183 [72%] [-14.40dB]
Simple mixer control 'Mic Jack Mode',0
Capabilities: enum
Items: 'Mic In' 'Line In'
Item0: 'Mic In'
Simple mixer control 'IEC958',0
Capabilities: pswitch pswitch-joined penum
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'IEC958 Default PCM',0
Capabilities: pswitch pswitch-joined penum
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'IEC958 Playback Source',0
Capabilities: enum
Items: 'Digital Playback' 'ADAT' 'Analog Mux 1' 'Analog Mux 2' 'Analog Mux 3'
Item0: 'Digital Playback'
Simple mixer control 'IEC958',1
Capabilities: pswitch pswitch-joined penum
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'Beep',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum
Playback channels: Mono
Limits: Playback 0 - 3
Mono: Playback 0 [0%] [-18.00dB] [off]
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 14
Front Left: Capture 14 [100%] [21.00dB] [on]
Front Right: Capture 14 [100%] [21.00dB] [on]
Simple mixer control 'Capture',1
Capabilities: cvolume cswitch penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 14
Front Left: Capture 14 [100%] [21.00dB] [off]
Front Right: Capture 14 [100%] [21.00dB] [off]
Simple mixer control 'Capture',2
Capabilities: cvolume cswitch penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 14
Front Left: Capture 14 [100%] [21.00dB] [off]
Front Right: Capture 14 [100%] [21.00dB] [off]
Simple mixer control 'Digital',0
Capabilities: cvolume penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 120
Front Left: Capture 115 [96%] [27.50dB]
Front Right: Capture 115 [96%] [27.50dB]
Simple mixer control 'Input Source',0
Capabilities: cenum
Items: 'Mic' 'Front Mic' 'Digital Mic'
Item0: 'Mic'
Simple mixer control 'Input Source',1
Capabilities: cenum
Items: 'Mic' 'Front Mic' 'Digital Mic'
Item0: 'Mic'
Simple mixer control 'Input Source',2
Capabilities: cenum
Items: 'Mic' 'Front Mic' 'Digital Mic'
Item0: 'Mic'
Simple mixer control 'Mux',0
Capabilities: cvolume penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 4
Front Left: Capture 4 [100%] [40.00dB]
Front Right: Capture 4 [100%] [40.00dB]
Simple mixer control 'Mux',1
Capabilities: cvolume penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 4
Front Left: Capture 4 [100%] [40.00dB]
Front Right: Capture 4 [100%] [40.00dB]
Simple mixer control 'Mux',2
Capabilities: cvolume penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 4
Front Left: Capture 4 [100%] [40.00dB]
Front Right: Capture 4 [100%] [40.00dB]
[jorge@flamingo ~]$
The capture section seems to be ok.. However when I am using skype,
the people I call only hear a noise and nothing else. I confirmed that with
skype call testing service..
Moreover, the levels of the mixer are ok and nothing is muted.
Finally, the mic itself works fine, I dual boot with XP and I didn't have
any problems with skype there..
Please let me know what other information you need..
Many thanks in advance.
Last edited by geo909 (2011-02-23 01:23:28)

alterecco wrote:
If you are using alsa, then remember to go into alsamixer and turn up your microphone volumes and set a device as the capture device.
Basically, go to the capture pane (F4), navigate to the capture device you want to use, and press Space to toggle it on.
First of all, I'm so sorry for the late reply.. I didn't have access to a pc for a long time.
And actually your suggestion did the job! I don't believe it was something that simple,
I spent hours googling around and trying all sorts of stuff..
Thanks a lot!!!

[SOLVED] network does not work at bootup

Similar Messages

Maybe you are looking for