[SOLVED] No sound with vmware

I'm getting no sound with vmware, not sure why
Here's what I've been trying to test things:
$ cat /dev/urandom | aplay
Playing raw data 'stdin' : Unsigned 8 bit, Rate 8000 Hz, Mono
Here's some alsa info, if it helps:
$ aplay -L
null
Discard all samples (playback) or generate zero samples (capture)
default:CARD=AudioPCI
Ensoniq AudioPCI, ES1371 DAC2/ADC
Default Audio Device
sysdefault:CARD=AudioPCI
Ensoniq AudioPCI, ES1371 DAC2/ADC
Default Audio Device
front:CARD=AudioPCI,DEV=0
Ensoniq AudioPCI, ES1371 DAC2/ADC
Front speakers
rear:CARD=AudioPCI,DEV=0
Ensoniq AudioPCI, ES1371 DAC1
Rear speakers
surround40:CARD=AudioPCI,DEV=0
Ensoniq AudioPCI, ES1371 DAC2/ADC
4.0 Surround output to Front and Rear speakers
iec958:CARD=AudioPCI,DEV=0
Ensoniq AudioPCI, ES1371 DAC2/ADC
IEC958 (S/PDIF) Digital Audio Output
Last edited by specular (2014-08-27 19:52:45)

Don't think I was clear enough, but arch is installed as a vmware guest. Below is the requested output from the alsa-info script:
upload=true&script=true&cardinfo=
!!ALSA Information Script v 0.4.63
!!Script ran on: Wed Aug 27 18:29:05 UTC 2014
!!Linux Distribution
NAME="Arch Linux" ID=arch PRETTY_NAME="Arch Linux" HOME_URL="https://www.archlinux.org/" SUPPORT_URL="https://bbs.archlinux.org/" BUG_REPORT_URL="https://bugs.archlinux.org/"
!!DMI Information
Manufacturer: VMware, Inc.
Product Name: VMware7,1
Product Version: None
Firmware Version: VMW71.00V.0.B64.1310020058
!!Kernel Information
Kernel release: 3.14.2-1-ARCH
Operating System: GNU/Linux
Architecture: x86_64
Processor: unknown
SMP Enabled: Yes
!!ALSA Version
Driver version: k3.14.2-1-ARCH
Library version: 1.0.27.2
Utilities version: 1.0.28
!!Loaded ALSA modules
snd_ens1371
!!Sound Servers on this system
No sound servers found.
!!Soundcards recognised by ALSA
0 [AudioPCI ]: ENS1371 - Ensoniq AudioPCI
Ensoniq AudioPCI ENS1371 at 0x1000, irq 19
!!PCI Soundcards installed in the system
02:01.0 Multimedia audio controller: Ensoniq ES1371 [AudioPCI-97] (rev 02)
!!Advanced information - PCI Vendor/Device/Subsystem ID's
02:01.0 0401: 1274:1371 (rev 02)
Subsystem: 1274:1371
!!Loaded sound module options
!!Module: snd_ens1371
enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
id : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
joystick_port : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
lineio : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
spdif : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
!!AC97 Codec information
--startcollapse--
0-0/0: Cirrus Logic CS4297A rev 3
PCI Subsys Vendor: 0x1274
PCI Subsys Device: 0x1371
Flags: 4
Capabilities :
DAC resolution : 16-bit
ADC resolution : 16-bit
3D enhancement : No 3D Stereo Enhancement
Current setup
Mic gain : +0dB [+0dB]
POP path : pre 3D
Sim. stereo : off
3D enhancement : off
Loudness : off
Mono output : MIX
Mic select : Mic1
ADC/DAC loopback : off
0:00 = 0000
0:02 = 0e8e
0:04 = 0000
0:06 = 0000
0:08 = 0000
0:0a = 0000
0:0c = bfbf
0:0e = bfbf
0:10 = bfbf
0:12 = bfbf
0:14 = bfbf
0:16 = bfbf
0:18 = 28a8
0:1a = 0000
0:1c = 0808
0:1e = 0000
0:20 = 0000
0:22 = 0000
0:24 = 0000
0:26 = 000f
0:28 = 0000
0:2a = 0000
0:2c = 0000
0:2e = 0000
0:30 = 0000
0:32 = 0000
0:34 = 0000
0:36 = 0000
0:38 = 0000
0:3a = 0000
0:3c = 0000
0:3e = 0000
0:40 = 0000
0:42 = 0000
0:44 = 0000
0:46 = 0000
0:48 = 0000
0:4a = 0000
0:4c = 0000
0:4e = 0000
0:50 = 0000
0:52 = 0000
0:54 = 0000
0:56 = 0000
0:58 = 0000
0:5a = 0000
0:5c = 0000
0:5e = 0000
0:60 = 0000
0:62 = 0000
0:64 = 0000
0:66 = 0000
0:68 = 0000
0:6a = 0000
0:6c = 0000
0:6e = 0000
0:70 = 0000
0:72 = 0000
0:74 = 0000
0:76 = 0000
0:78 = 0000
0:7a = 0000
0:7c = 4352
0:7e = 5913
--endcollapse--
!!ALSA Device nodes
crw-rw----+ 1 root audio 116, 6 Aug 28 01:35 /dev/snd/controlC0
crw-rw----+ 1 root audio 116, 2 Aug 28 01:35 /dev/snd/midiC0D0
crw-rw----+ 1 root audio 116, 5 Aug 28 01:35 /dev/snd/pcmC0D0c
crw-rw----+ 1 root audio 116, 4 Aug 28 03:28 /dev/snd/pcmC0D0p
crw-rw----+ 1 root audio 116, 3 Aug 28 01:35 /dev/snd/pcmC0D1p
crw-rw----+ 1 root audio 116, 1 Aug 28 01:35 /dev/snd/seq
crw-rw----+ 1 root audio 116, 33 Aug 28 01:35 /dev/snd/timer
/dev/snd/by-path:
total 0
drwxr-xr-x 2 root root 60 Aug 28 01:35 .
drwxr-xr-x 3 root root 200 Aug 28 01:35 ..
lrwxrwxrwx 1 root root 12 Aug 28 01:35 pci-0000:02:01.0 -> ../controlC0
!!Aplay/Arecord output
APLAY
**** List of PLAYBACK Hardware Devices ****
card 0: AudioPCI [Ensoniq AudioPCI], device 0: ES1371/1 [ES1371 DAC2/ADC]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: AudioPCI [Ensoniq AudioPCI], device 1: ES1371/2 [ES1371 DAC1]
Subdevices: 1/1
Subdevice #0: subdevice #0
ARECORD
**** List of CAPTURE Hardware Devices ****
card 0: AudioPCI [Ensoniq AudioPCI], device 0: ES1371/1 [ES1371 DAC2/ADC]
Subdevices: 1/1
Subdevice #0: subdevice #0
!!Amixer output
!!-------Mixer controls for card 0 [AudioPCI]
Card hw:0 'AudioPCI'/'Ensoniq AudioPCI ENS1371 at 0x1000, irq 19'
Mixer name : 'Cirrus Logic CS4297A rev 3'
Components : 'AC97a:43525913'
Controls : 26
Simple ctrls : 13
Simple mixer control 'Master',0
Capabilities: pvolume pswitch pswitch-joined
Playback channels: Front Left - Front Right
Limits: Playback 0 - 63
Mono:
Front Left: Playback 49 [78%] [-21.00dB] [on]
Front Right: Playback 49 [78%] [-21.00dB] [on]
Simple mixer control 'PCM',0
Capabilities: pvolume pswitch pswitch-joined
Playback channels: Front Left - Front Right
Limits: Playback 0 - 63
Mono:
Front Left: Playback 23 [37%] [0.00dB] [on]
Front Right: Playback 23 [37%] [0.00dB] [on]
Simple mixer control 'Line',0
Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-exclusive
Capture exclusive group: 0
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: Playback 0 - 63
Front Left: Playback 0 [0%] [-34.50dB] [off] Capture [off]
Front Right: Playback 0 [0%] [-34.50dB] [off] Capture [off]
Simple mixer control 'CD',0
Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-exclusive
Capture exclusive group: 0
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: Playback 0 - 63
Front Left: Playback 0 [0%] [-34.50dB] [off] Capture [off]
Front Right: Playback 0 [0%] [-34.50dB] [off] Capture [off]
Simple mixer control 'Mic',0
Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-exclusive
Capture exclusive group: 0
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: Playback 0 - 63
Front Left: Playback 0 [0%] [-34.50dB] [off] Capture [on]
Front Right: Playback 0 [0%] [-34.50dB] [off] Capture [on]
Simple mixer control 'Mic Boost (+20dB)',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'Video',0
Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-exclusive
Capture exclusive group: 0
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: Playback 0 - 63
Front Left: Playback 0 [0%] [-34.50dB] [off] Capture [off]
Front Right: Playback 0 [0%] [-34.50dB] [off] Capture [off]
Simple mixer control 'Phone',0
Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-exclusive
Capture exclusive group: 0
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: Playback 0 - 63
Front Left: Playback 0 [0%] [-34.50dB] [off] Capture [off]
Front Right: Playback 0 [0%] [-34.50dB] [off] Capture [off]
Simple mixer control 'IEC958',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'Aux',0
Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-exclusive
Capture exclusive group: 0
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: Playback 0 - 63
Front Left: Playback 0 [0%] [-34.50dB] [off] Capture [off]
Front Right: Playback 0 [0%] [-34.50dB] [off] Capture [off]
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch cswitch-joined
Capture channels: Front Left - Front Right
Limits: Capture 0 - 15
Front Left: Capture 8 [53%] [12.00dB] [on]
Front Right: Capture 8 [53%] [12.00dB] [on]
Simple mixer control 'Mix',0
Capabilities: cswitch cswitch-exclusive
Capture exclusive group: 0
Capture channels: Front Left - Front Right
Front Left: Capture [off]
Front Right: Capture [off]
Simple mixer control 'Mix Mono',0
Capabilities: cswitch cswitch-exclusive
Capture exclusive group: 0
Capture channels: Front Left - Front Right
Front Left: Capture [off]
Front Right: Capture [off]
!!Alsactl output
--startcollapse--
state.AudioPCI {
control.1 {
iface MIXER
name 'Master Playback Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
control.2 {
iface MIXER
name 'Master Playback Volume'
value.0 49
value.1 49
comment {
access 'read write'
type INTEGER
count 2
range '0 - 63'
dbmin -9450
dbmax 0
dbvalue.0 -2100
dbvalue.1 -2100
control.3 {
iface MIXER
name 'Phone Playback Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.4 {
iface MIXER
name 'Phone Playback Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 63'
dbmin -3450
dbmax 6000
dbvalue.0 -3450
dbvalue.1 -3450
control.5 {
iface MIXER
name 'Mic Playback Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.6 {
iface MIXER
name 'Mic Playback Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 63'
dbmin -3450
dbmax 6000
dbvalue.0 -3450
dbvalue.1 -3450
control.7 {
iface MIXER
name 'Mic Boost (+20dB)'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.8 {
iface MIXER
name 'Line Playback Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.9 {
iface MIXER
name 'Line Playback Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 63'
dbmin -3450
dbmax 6000
dbvalue.0 -3450
dbvalue.1 -3450
control.10 {
iface MIXER
name 'CD Playback Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.11 {
iface MIXER
name 'CD Playback Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 63'
dbmin -3450
dbmax 6000
dbvalue.0 -3450
dbvalue.1 -3450
control.12 {
iface MIXER
name 'Video Playback Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.13 {
iface MIXER
name 'Video Playback Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 63'
dbmin -3450
dbmax 6000
dbvalue.0 -3450
dbvalue.1 -3450
control.14 {
iface MIXER
name 'Aux Playback Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.15 {
iface MIXER
name 'Aux Playback Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 63'
dbmin -3450
dbmax 6000
dbvalue.0 -3450
dbvalue.1 -3450
control.16 {
iface MIXER
name 'PCM Playback Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
control.17 {
iface MIXER
name 'PCM Playback Volume'
value.0 23
value.1 23
comment {
access 'read write'
type INTEGER
count 2
range '0 - 63'
dbmin -3450
dbmax 6000
dbvalue.0 0
dbvalue.1 0
control.18 {
iface MIXER
name 'Capture Source'
value.0 Mic
value.1 Mic
comment {
access 'read write'
type ENUMERATED
count 2
item.0 Mic
item.1 CD
item.2 Video
item.3 Aux
item.4 Line
item.5 Mix
item.6 'Mix Mono'
item.7 Phone
control.19 {
iface MIXER
name 'Capture Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
control.20 {
iface MIXER
name 'Capture Volume'
value.0 8
value.1 8
comment {
access 'read write'
type INTEGER
count 2
range '0 - 15'
dbmin 0
dbmax 2250
dbvalue.0 1200
dbvalue.1 1200
control.21 {
iface MIXER
name 'IEC958 Playback Con Mask'
value '0fff000f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
control.22 {
iface MIXER
name 'IEC958 Playback Pro Mask'
value cf00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
comment {
access read
type IEC958
count 1
control.23 {
iface MIXER
name 'IEC958 Playback Default'
value '0082000200000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access 'read write'
type IEC958
count 1
control.24 {
iface MIXER
name 'IEC958 Playback Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.25 {
iface PCM
name 'Playback Channel Map'
value.0 0
value.1 0
comment {
access read
type INTEGER
count 2
range '0 - 36'
control.26 {
iface PCM
device 1
name 'Playback Channel Map'
value.0 0
value.1 0
comment {
access read
type INTEGER
count 2
range '0 - 36'
--endcollapse--
!!All Loaded Modules
Module
fuse
vmw_vsock_vmci_transport
vsock
nls_iso8859_1
nls_cp437
vfat
fat
coretemp
hwmon
joydev
snd_ens1371
mousedev
snd_ac97_codec
hid_generic
ac97_bus
gameport
snd_rawmidi
snd_seq_device
snd_pcm
snd_timer
snd
crct10dif_pclmul
crc32_pclmul
crc32c_intel
ghash_clmulni_intel
soundcore
usbhid
aesni_intel
aes_x86_64
lrw
gf128mul
glue_helper
hid
psmouse
vmwgfx
ppdev
ablk_helper
cryptd
evdev
vmxnet3
mac_hid
pcspkr
vmw_balloon
i2c_piix4
serio_raw
ttm
microcode
drm
processor
i2c_core
intel_agp
intel_gtt
vmw_vmci
parport_pc
parport
battery
shpchp
ac
button
ext4
crc16
mbcache
jbd2
dm_mod
sd_mod
crc_t10dif
crct10dif_common
sr_mod
cdrom
ata_generic
pata_acpi
atkbd
libps2
ata_piix
libata
mptsas
scsi_transport_sas
mptscsih
uhci_hcd
ehci_pci
scsi_mod
ehci_hcd
usbcore
mptbase
usb_common
floppy
i8042
serio
!!ALSA/HDA dmesg
[ 5.342713] mousedev: PS/2 mouse device common for all mice
[ 5.345140] snd_ens1371 0000:02:01.0: enabling device (0000 -> 0001)
[ 5.391722] intel_rapl: domain package energy ctr 0:0 not working, skip
Last edited by specular (2014-08-27 18:45:55)

Similar Messages

  • [SOLVED]No Sound with ALSA - Intel Corporation 82801G HD Audio

    Hey all,
    I've succesfully installed Arch Linux. My past two attempts have met with failure, all because of my own failure to read and follow directions correctly. This time everything is installed correctly. I am running Kdemod3 on my laptop with Arch and everything works great. I LOVE Pacman and the simplicity of Arch's configuration files. It's super fast and all together simple. My only remaining problem is this:
    My sound with ALSA is not functioning. I followed the installation instructions at the arch wiki and after unmuting all of my channels I still would not get any sound. My sound module is snd_hda_intel and it is detected, loaded and the whole nine yards (as far as I can tell). My user is a member of the 'audio' user group also. I looked at the troubleshooting tips on the bottom of the Wiki but decided not to try them as they do not seem to pertain to my card (snd_hda_intel) but I will try them if anyone would like me to.
    If anyone has any ideas, they'd be greatly appreciated!:D Anything I can provide that you need I will be more than willing to provide.
    Thanks for such a great distribution,
    Dan
    Last edited by JazzDan (2008-06-29 05:06:35)

    Problem resolved. I ran alsaconf, selected my soundcard, and everything was working from there out. Thanks MisfitI38 on the IRC!!!

  • [SOLVED] No sound (with flash)

    Hello.
    I have no sound with flash. It does work elsewhere.
    I am using ALSA.
    My flash should output audio correctly according to wiki: https://wiki.archlinux.org/index.php/Fl … d_in_Flash
    # aplay -l
    **** List of PLAYBACK Hardware Devices ****
    card 0: PCH [HDA Intel PCH], device 0: ALC889 Analog [ALC889 Analog]
      Subdevices: 1/1
      Subdevice #0: subdevice #0
    card 0: PCH [HDA Intel PCH], device 1: ALC889 Digital [ALC889 Digital]
      Subdevices: 1/1
      Subdevice #0: subdevice #0
    card 1: Generic [HD-Audio Generic], device 3: HDMI 0 [HDMI 0]
      Subdevices: 1/1
      Subdevice #0: subdevice #0
    EDIT: I'm retarded. I didn't add my user to audio group. And sound elsewhere was from speaker-test which needs SU.
    Last edited by handl3r (2012-01-22 07:39:34)

    codemac wrote:
    Orrrr it's because the flash plugin uses OSS.
    run `aoss firefox` and be happy.
    OSS does still work or at least the alsa backwards compatibility layer that emulates the old interfaces, right? did i miss anything?
    for newer versions of flash (like version 9) simply install firefox in wine and let it install the plugin. that usually works great!

  • [solved] no sound with multimedia apps using Pulseaudio Dummy drive

    It seems audio issues are kindof frequent atm, but I couldn't solve the strange issue using the informations provided in the threads nor the wiki
    Issue:
    One app plays audio just fine: Deadbeef Audio player, but no activity shows up in Pavucontrol while playing.
        Deadbeef uses default Alsa outpput (currently Pulse audio server)
    The other multimedia that I use or tried (mplayer, VLC and paplay test.wav) play files with no sound to be heard. Pavucontrol just shows 'dummy output' activity
    as for mplayer that is the case with default pulse and alsa audio drivers
    Context:
    1/ Recently switched from ALSA to PulseAudio
    Have no  ~/.asoundrc
    2/ First appeared when:
    Installed software updates last week. I lazily hoped it will resolve itself with the next update which it didn't so far. None of the packets I updated had linux|pulse|alsa|sound|audio in its name.
    Another issue appeared at the same time: no software is able to play any media from the DVD drive. The optical drive itself is well recognized whether by 'lsscsi' or /proc/sys/dev/cdrom/info
    3/ PulseAudio did not start today after booting the system
    $ pulseaudio --start
        E: [pulseaudio] main.c: daemon startup failed
    Started OK after commenting "/etc/pulse/default.pa" config line that remap microphone to mono for Skype (as per the Pulseaudio wiki)
    System Audio info:
    $ cat /proc/asound/cards
    0 [PCH ]: HDA-Intel - HDA Intel PCH
    HDA Intel PCH at 0xf7d00000 irq 46
    $ lspci|grep -i audio
    00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
    $ aplay -l
    carte 0: PCH [HDA Intel PCH], périphérique 0: ALC892 Analog [ALC892 Analog]
    Sous-périphériques: 1/1
    Sous-périphérique #0: subdevice #0
    carte 0: PCH [HDA Intel PCH], périphérique 1: ALC892 Digital [ALC892 Digital]
    Sous-périphériques: 1/1
    Sous-périphérique #0: subdevice #0
    # fuser -v /dev/snd/*
    /dev/snd/controlC0: kozaki 20121 F.... pulseaudio
    $ cat /proc/asound/modules;
    0 snd_hda_intel
    $ lsmod | grep ^snd;
    snd_hda_codec_realtek 67127 1
    snd_hda_codec_generic 63126 1 snd_hda_codec_realtek
    snd_hda_intel 26327 3
    snd_hda_controller 26727 1 snd_hda_intel
    snd_hda_codec 108552 4 snd_hda_codec_realtek,snd_hda_codec_generic,snd_hda_intel,snd_hda_controller
    snd_hwdep 17244 1 snd_hda_codec
    snd_pcm 88487 3 snd_hda_codec,snd_hda_intel,snd_hda_controller
    snd_timer 26614 1 snd_pcm
    snd 69340 13 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_pcm,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel
    $ systool -vm relevant_snd_module
    EDIT
    $ systool -vm snd_hda_intel
    Module = "snd_hda_intel"
    Attributes:
    coresize = "26327"
    initsize = "0"
    initstate = "live"
    refcnt = "5"
    taint = ""
    uevent = <store method only>
    Parameters:
    align_buffer_size = "-1"
    bdl_pos_adj = "1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1"
    beep_mode = "Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y"
    enable_msi = "1"
    enable = "Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y"
    id = "(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)"
    index = "-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1"
    jackpoll_ms = "0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0"
    model = "(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)"
    patch = "(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)"
    position_fix = "-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1"
    power_save = "1"
    power_save_controller= "Y"
    probe_mask = "-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1"
    probe_only = "0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0"
    single_cmd = "N"
    snoop = "Y"
    Sections:
    .bss = "0xffffffffa0365a80"
    .data = "0xffffffffa0365000"
    .data.unlikely = "0xffffffffa03657d0"
    .exit.text = "0xffffffffa0362930"
    .gnu.linkonce.this_module= "0xffffffffa0365800"
    .init.text = "0xffffffffa0368000"
    .note.gnu.build-id = "0xffffffffa0363000"
    .rodata = "0xffffffffa0363040"
    .rodata.str1.1 = "0xffffffffa0363f02"
    .rodata.str1.8 = "0xffffffffa03642e0"
    .smp_locks = "0xffffffffa0364618"
    .strtab = "0xffffffffa036b508"
    .symtab = "0xffffffffa0369000"
    .text = "0xffffffffa0360000"
    __mcount_loc = "0xffffffffa0364848"
    __param = "0xffffffffa0364628"
    __verbose = "0xffffffffa0365640"
    I guess it might be a rather basic configuration step that I missed and am blind to see. If so, sorry for wasting your time :-/ Hint appreciated.
    Last edited by kozaki (2014-09-01 19:43:16)

    Read how to post correctly to get English output.
    kozaki wrote:$ systool -vm relevant_snd_module;
    Really? What do you think relevant_snd_module is? When you copy something from another thread, maybe it would be wise to read through it first. I tried to explain that there is no relevant_snd_module, it is a hint to the user, yes you, to use the module that is relevant in users case, which often is snd_hda_intel, which again is also mentioned in the other thread. Read it and correct your post accordingly please.
    As for the issue at hand, is module-suspend-on-idle loaded? If so, disable and unload it. Start PA with '-vvvv' switch and post the log here. You might want to try defaulting the configuration for PA, meaning delete your ~/.config/pulse. Does your GPU have a hdmi sound card?
    Check if you can get sound output with PA killed through speaker-test:
    speaker-test -c 8 -t wav -D plug:"dmix:{CARD PCH DEV 0}"
    speaker-test -c 2 -t wav -D plug:"dmix:{CARD PCH DEV 0}"
    Both should work launched in that order at the same time.

  • [SOLVED]No sound with ALSA. I'm looking for help with troubleshooting.

    Hi!
    Recently I bought a new laptop (HP Probook 450 G1). For some reason I can't hear sound from the laptop's speaker or headphones. I already read the troubleshooting guide on wiki. Unfortunately none of the solutions described on the wiki helped. I'm not using PulseAudio and I'm out of ideas.
    Additional information:
    Alsamixer screenshot.
    ~ lsmod |grep snd
    snd_hda_codec_realtek 54803 1
    snd_hda_codec_generic 56366 1 snd_hda_codec_realtek
    snd_hda_codec_hdmi 40396 1
    snd_hda_intel 22831 6
    snd_hda_controller 22975 1 snd_hda_intel
    snd_hda_codec 104665 5 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_intel,snd_hda_controller
    snd_hwdep 6652 1 snd_hda_codec
    snd_pcm 83207 6 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel,snd_hda_controller
    snd_timer 19294 3 snd_pcm
    snd 61276 16 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel
    soundcore 5551 2 snd,snd_hda_codec
    ~ aplay -l
    **** List of PLAYBACK Hardware Devices ****
    card 0: SB [HDA ATI SB], device 0: ALC888 Analog [ALC888 Analog]
    Subdevices: 0/1
    Subdevice #0: subdevice #0
    card 0: SB [HDA ATI SB], device 1: ALC888 Digital [ALC888 Digital]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: HDMI [HDA ATI HDMI], device 3: HDMI 0 [HDMI 0]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    ~ speaker-test
    speaker-test 1.0.28
    Playback device is default
    Stream parameters are 48000Hz, S16_LE, 1 channels
    Using 16 octaves of pink noise
    Rate set to 48000Hz (requested 48000Hz)
    Buffer size range from 2048 to 16384
    Period size range from 1024 to 1024
    Using max buffer size 16384
    Periods = 4
    was set period_size = 1024
    was set buffer_size = 16384
    0 - Front Left
    Time per period = 2.651060
    0 - Front Left
    lspci |grep Audio
    00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA)
    01:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Juniper HDMI Audio [Radeon HD 5700 Series]
    ~ cat /proc/asound/cards
    cat /proc/asound/cards
    0 [SB ]: HDA-Intel - HDA ATI SB
    HDA ATI SB at 0xfe024000 irq 16
    1 [HDMI ]: HDA-Intel - HDA ATI HDMI
    HDA ATI HDMI at 0xfdffc000 irq 43
    Last edited by Skitter (2014-09-01 06:22:30)

    brebs wrote:
    emeres wrote:Why disable a card?
    So that the right output becomes the all-important *default* output. And it's conveniently a simple one-liner.
     I am very aware of that, why not use index instead? It is as convenient as enable. Why leave the user with a disabled device, when it can continue to work? I consider this highly inefficient, because it does not solve the actual issue and creates a potential problem in the future.
     In this case, user interaction was the cause, so it does not matter.
    Edit: Typo.
    Last edited by emeres (2014-08-29 17:45:29)

  • [SOLVED] Low sound with ALSA

    Hi! I'm using alsa on a laptop with master, speaker and PCM at 100%, and I still can't get an output as loud as I'd like.
    On ubuntu with pulseaudio, I had the option of setting the volume to 120% on the sound preferences menu, which made a desirable volume level for me. Is there an equivalent thing in arch? Is this like setting PCM to something higher than 0b?
    Cheers!
    Last edited by orlox (2010-08-14 20:09:46)

    Just installed pulseaudio. Not really a solution to the name of this thread, since I didn't get a loud volume with ALSA, but it solves my problem of having low volume on my PC

  • [Solved] No sound with udev 173

    After updating to udev 173, i don't have any sound. The problem resolves when downgrading to udev 172. I compared the permissions in /dev/snd:
    < drwxr-xr-x 2 root root 60 by-path
    < crw-rw----+ 1 root audio 116, 8 controlC0
    < crw-rw----+ 1 root audio 116, 7 hwC0D2
    < crw-rw----+ 1 root audio 116, 6 pcmC0D0c
    < crw-rw----+ 1 root audio 116, 5 pcmC0D0p
    < crw-rw----+ 1 root audio 116, 4 pcmC0D1c
    < crw-rw----+ 1 root audio 116, 3 pcmC0D1p
    < crw-rw----+ 1 root audio 116, 2 pcmC0D2c
    < crw-rw---- 1 root audio 116, 1 seq
    < crw-rw----+ 1 root audio 116, 33 timer
    > drwxr-xr-x 2 root root 60 by-path
    > crw-rw---- 1 root audio 116, 8 controlC0
    > crw-rw---- 1 root audio 116, 7 hwC0D2
    > crw-rw---- 1 root audio 116, 6 pcmC0D0c
    > crw-rw---- 1 root audio 116, 5 pcmC0D0p
    > crw-rw---- 1 root audio 116, 4 pcmC0D1c
    > crw-rw---- 1 root audio 116, 3 pcmC0D1p
    > crw-rw---- 1 root audio 116, 2 pcmC0D2c
    > crw-rw---- 1 root audio 116, 1 seq
    > crw-rw---- 1 root audio 116, 33 timer
    I don't know if it's related, but i noticed a segfault in dmesg:
    [ 209.583561] gnome-settings-[725]: segfault at b3aca160 ip b3aca160 sp bfcaeccc error 4
    What should i do?
    Edit: Fixed with 173-2.
    Last edited by Wey (2011-07-31 15:25:53)

    Please mark your topic solved Wey.

  • [solved] No sound with ALC269VB on asus 1215b EeePC

    Hello,
    I've just finished the basic install on a Asus Eee PC 1215B (with an APU C-50) and I'm having problems to make the sound work. I've googled around without succes...
    # aplay -l
    **** List of PLAYBACK Hardware Devices ****
    card 0: Generic [HD-Audio Generic], device 3: HDMI 0 [HDMI 0]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: SB [HDA ATI SB], device 0: ALC269VB Analog [ALC269VB Analog]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    # cat /proc/asound/card1/pcm0p/info
    card: 1
    device: 0
    subdevice: 0
    stream: PLAYBACK
    id: ALC269VB Analog
    name: ALC269VB Analog
    subname: subdevice #0
    class: 0
    subclass: 0
    subdevices_count: 1
    subdevices_avail: 1
    # cat /etc/modprobe.d/modprobe.conf
    blacklist radeon
    option snd-hda-intel mode=auto
    I've runned alsaconf and rebooted several times and nothing helped...
    When I run alsamixer, the default chip that appears is ATI R6xx HDMI, with only S/PDIF channel, when I change card to HDA ATI SB (chip Realtek ALC269VB) it appears the usual channels the change volume. Only mic is muted, the I run speaker-test:
    # speaker-test -c 1
    speaker-test 1.0.24.2
    Playback device is default
    Stream parameters are 48000Hz, S16_LE, 1 channels
    Using 16 octaves of pink noise
    ALSA lib pcm_dmix.c:1018:(snd_pcm_dmix_open) unable to open slave
    Playback open error: -2,No such file or directory
    I dont have ideas to solve this...
    Could someone help me??
    Gratefull,
    Heitor.
    Last edited by heitorpb (2012-01-22 20:00:19)

    New try. Check IDs with:
    cat /proc/asound/card0/id
    cat /proc/asound/card1/id
    Then do something like
    options snd-hda-intel id=SB,HDMI index=0,1
    using the IDs you got with the commands above.
    As for .asoundrc, I've seen one recently, but can't remember where. Edit - Found it:
    pcm.!default {
    type hw
    card SB
    ctl.!default {
    type hw
    card SB
    However this will only play one sound at a time. Check here if you want to play around with this stuff: http://alsa.opensrc.org/FAQ026. Hopefully you won't need to.
    Last edited by Gusar (2012-01-22 20:02:39)

  • [SOLVED] No sound with Chromium, libpepflashplayer problem.

    Hi,
    I had problem with no sound in Chromium when using the flashplayer, but it all worked in Firefox.
    The problem was the chromium-pepper-flash player that I used as described in the Wiki.
    with that player I get following message when starting Chromium:
    ALSA lib setup.c:565:(add_elem) Cannot obtain info for CTL elem (MIXER,'Audigy Analog/Digital Output Jack',0,0,0): No such file or directory
    But if I use:
    Shockwave Flash
    Version:    11.2 r202
    Location:    /usr/lib/mozilla/plugins/libflashplayer.so
    Type:    NPAPI
    I got sound ok, unfortunately the player crach much more often, something that was the reason I changed to  chromium-pepper-flash player
    Any ides why I do not get sound in Chromium with chromium-pepper-flash player?
    Best regards.
    Christer
    Last edited by agkbill (2012-12-08 08:29:34)

    To share my findings.
    The problem was a the settings in asound.conf.
    My old "asound.conf."
    # conver alsa API over jack API
    # use it with
    # % aplay foo.wav
    # use this as default
    pcm.!default {
    type plug
    slave { pcm "jack" }
    ctl.mixer0 {
    type hw
    card 1
    # pcm type jack
    pcm.jack {
    type jack
    playback_ports {
    0 system:playback_1
    1 system:playback_2
    capture_ports {
    0 system:capture_1
    1 system:capture_2
    Left since I was playing around wirh PureData and Jack.
    All my outher audio apps like mpd, xbmc worked just finde with this one but not libpepflashplayer.
    My new asound.conf
    # use this as default
    pcm.!default {
    type hw
    card 0
    device 0
    ctl.mixer0 {
    type hw
    card 0
    With the new one also libpepflashplayer works OK.
    Using libflashplayer was a very bad option for me because it crash so often. libpepflashplayer much more stable for me.
    All the best.
    Christer

  • [SOLVED] No sound with Asus Xonar DGX

    I've got no sound so I've looked into journalctl and there were some bluez and pulseaudio related erros. So i.a.w. this topic https://bbs.archlinux.org/viewtopic.php?id=155714 I did `systemctl enable bluetooth.service`. No more errors but still no sound.
    Other things I did:
    - unplug/plug headphones
    - check whether anything is muted in alsamixer and the gnome sound applet (note: nothing is greyed-out, microphone picks up signals)
    snd_oxygen i.e. ASUS XONAR is the sound card I would like to use and I hook my headphones to.
    # cat /proc/asound/cards
    0 [DGX ]: CMI8786 - Xonar DGX
    C-Media Oxygen HD Audio at 0xee00, irq 17
    1 [HDMI ]: HDA-Intel - HDA ATI HDMI
    HDA ATI HDMI at 0xfd7fc000 irq 30
    # lsmod | grep '^snd' | column -t
    snd_hda_codec_hdmi 49263 1
    snd_hda_intel 26387 2
    snd_hda_controller 26857 1 snd_hda_intel
    snd_oxygen 23783 2
    snd_hda_codec 112621 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_controller
    snd_oxygen_lib 36709 1 snd_oxygen
    snd_hwdep 17244 1 snd_hda_codec
    snd_mpu401_uart 13507 1 snd_oxygen_lib
    snd_rawmidi 26806 1 snd_mpu401_uart
    snd_seq_device 13307 1 snd_rawmidi
    snd_pcm 88779 5 snd_hda_codec_hdmi,snd_oxygen_lib,snd_hda_codec,snd_hda_intel,snd_hda_controller
    snd_timer 26614 1 snd_pcm
    snd 73436 19 snd_oxygen,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_rawmidi,snd_oxygen_lib,snd_hda_codec,snd_hda_intel,snd_mpu401_uart,snd_seq_device
    # journalctl -b | grep -i bluez
    Apr 26 12:13:52 arch1411 dbus[326]: [system] Activating via systemd: service name='org.bluez' unit='dbus-org.bluez.service'
    Apr 26 12:13:52 arch1411 dbus[326]: [system] Successfully activated service 'org.bluez'
    Apr 26 12:14:31 arch1411 /usr/lib/gdm/gdm-x-session[359]: Activating service name='org.bluez.obex'
    Apr 26 12:14:31 arch1411 /usr/lib/gdm/gdm-x-session[359]: Successfully activated service 'org.bluez.obex'
    [root@arch1411 hg1]# journalctl -b | grep -i audio
    Apr 26 12:13:50 arch1411 kernel: snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
    Apr 26 12:13:52 arch1411 rtkit-daemon[432]: Successfully made thread 431 of process 431 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
    Apr 26 12:13:52 arch1411 rtkit-daemon[432]: Successfully made thread 456 of process 431 (/usr/bin/pulseaudio) owned by '1000' RT at priority 5.
    Apr 26 12:13:52 arch1411 rtkit-daemon[432]: Successfully made thread 497 of process 431 (/usr/bin/pulseaudio) owned by '1000' RT at priority 5.
    Apr 26 12:13:52 arch1411 rtkit-daemon[432]: Successfully made thread 498 of process 431 (/usr/bin/pulseaudio) owned by '1000' RT at priority 5.
    Apr 26 15:37:00 arch1411 vlc.desktop[876]: [00007ffabc009ee8] mpgatofixed32 audio converter error: libmad error: bad main_data_begin pointer
    Apr 26 15:37:02 arch1411 vlc.desktop[876]: [00007ffae0c244f8] mpgatofixed32 audio converter error: libmad error: bad main_data_begin pointer
    # systemctl status pulseaudio.service
    ● pulseaudio.service
    Loaded: not-found (Reason: No such file or directory)
    Active: inactive (dead)
    # systemctl start pulseaudio.service
    Failed to start pulseaudio.service: Unit pulseaudio.service failed to load: No such file or directory.
    Should I proceed per https://bbs.archlinux.org/viewtopic.php?id=149501 and remove pulseaudio daemon from the /etc/rc.conf file?
    Last edited by bbarcher (2015-05-01 07:42:36)

    systemctl --all --no-pager|grep -i pulse
    returns nothing.
    Thank you for your input, V1del.
    $ pacmd list-cards
    2 card(s) available.
    index: 0
    name: <alsa_card.pci-0000_01_00.1>
    driver: <module-alsa-card.c>
    owner module: 6
    properties:
    alsa.card = "0"
    alsa.card_name = "HDA ATI HDMI"
    alsa.long_card_name = "HDA ATI HDMI at 0xfd7fc000 irq 30"
    alsa.driver_name = "snd_hda_intel"
    device.bus_path = "pci-0000:01:00.1"
    sysfs.path = "/devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card0"
    device.bus = "pci"
    device.vendor.id = "1002"
    device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
    device.product.id = "aa88"
    device.product.name = "Barts HDMI Audio [Radeon HD 6800 Series]"
    device.string = "0"
    device.description = "Barts HDMI Audio [Radeon HD 6800 Series]"
    module-udev-detect.discovered = "1"
    device.icon_name = "audio-card-pci"
    profiles:
    output:hdmi-stereo: Digital Stereo (HDMI) Output (priority 5400, available: unknown)
    output:hdmi-surround: Digital Surround 5.1 (HDMI) Output (priority 300, available: unknown)
    output:hdmi-surround71: Digital Surround 7.1 (HDMI) Output (priority 300, available: unknown)
    off: Off (priority 0, available: unknown)
    active profile: <output:hdmi-stereo>
    sinks:
    alsa_output.pci-0000_01_00.1.hdmi-stereo/#0: Barts HDMI Audio [Radeon HD 6800 Series] Digital Stereo (HDMI)
    sources:
    alsa_output.pci-0000_01_00.1.hdmi-stereo.monitor/#0: Monitor of Barts HDMI Audio [Radeon HD 6800 Series] Digital Stereo (HDMI)
    ports:
    hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: no)
    properties:
    device.icon_name = "video-display"
    index: 1
    name: <alsa_card.pci-0000_04_04.0>
    driver: <module-alsa-card.c>
    owner module: 24
    properties:
    alsa.card = "1"
    alsa.card_name = "Xonar DGX"
    alsa.long_card_name = "C-Media Oxygen HD Audio at 0xee00, irq 17"
    alsa.driver_name = "snd_oxygen"
    device.bus_path = "pci-0000:04:04.0"
    sysfs.path = "/devices/pci0000:00/0000:00:05.0/0000:03:00.0/0000:04:04.0/sound/card1"
    device.bus = "pci"
    device.vendor.id = "13f6"
    device.vendor.name = "C-Media Electronics Inc"
    device.product.id = "8788"
    device.product.name = "CMI8788 [Oxygen HD Audio]"
    device.string = "1"
    device.description = "CMI8788 [Oxygen HD Audio]"
    module-udev-detect.discovered = "1"
    device.icon_name = "audio-card-pci"
    profiles:
    input:analog-stereo: Analog Stereo Input (priority 60, available: unknown)
    output:analog-stereo: Analog Stereo Output (priority 6000, available: unknown)
    output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (priority 6060, available: unknown)
    off: Off (priority 0, available: unknown)
    active profile: <output:analog-stereo+input:analog-stereo>
    sinks:
    alsa_output.pci-0000_04_04.0.analog-stereo/#1: CMI8788 [Oxygen HD Audio] Analog Stereo
    sources:
    alsa_output.pci-0000_04_04.0.analog-stereo.monitor/#1: Monitor of CMI8788 [Oxygen HD Audio] Analog Stereo
    alsa_input.pci-0000_04_04.0.analog-stereo/#2: CMI8788 [Oxygen HD Audio] Analog Stereo
    ports:
    analog-input-front-mic: Front Microphone (priority 8500, latency offset 0 usec, available: unknown)
    properties:
    device.icon_name = "audio-input-microphone"
    analog-input-mic: Microphone (priority 8700, latency offset 0 usec, available: unknown)
    properties:
    device.icon_name = "audio-input-microphone"
    analog-input-linein: Line In (priority 8100, latency offset 0 usec, available: unknown)
    properties:
    analog-input-aux: Analog Input (priority 8000, latency offset 0 usec, available: unknown)
    properties:
    analog-output-headphones: Headphones (priority 9000, latency offset 0 usec, available: unknown)
    properties:
    device.icon_name = "audio-headphones"
    $ pacmd list-sinks
    2 sink(s) available.
    index: 0
    name: <alsa_output.pci-0000_01_00.1.hdmi-stereo>
    driver: <module-alsa-card.c>
    flags: HARDWARE DECIBEL_VOLUME LATENCY FLAT_VOLUME DYNAMIC_LATENCY
    state: SUSPENDED
    suspend cause: IDLE
    priority: 9050
    volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
    balance 0.00
    base volume: 65536 / 100% / 0.00 dB
    volume steps: 65537
    muted: no
    current latency: 0.00 ms
    max request: 0 KiB
    max rewind: 0 KiB
    monitor source: 0
    sample spec: s16le 2ch 44100Hz
    channel map: front-left,front-right
    Stereo
    used by: 0
    linked by: 0
    configured latency: 0.00 ms; range is 0.50 .. 1999.82 ms
    card: 0 <alsa_card.pci-0000_01_00.1>
    module: 6
    properties:
    alsa.resolution_bits = "16"
    device.api = "alsa"
    device.class = "sound"
    alsa.class = "generic"
    alsa.subclass = "generic-mix"
    alsa.name = "HDMI 0"
    alsa.id = "HDMI 0"
    alsa.subdevice = "0"
    alsa.subdevice_name = "subdevice #0"
    alsa.device = "3"
    alsa.card = "0"
    alsa.card_name = "HDA ATI HDMI"
    alsa.long_card_name = "HDA ATI HDMI at 0xfd7fc000 irq 30"
    alsa.driver_name = "snd_hda_intel"
    device.bus_path = "pci-0000:01:00.1"
    sysfs.path = "/devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card0"
    device.bus = "pci"
    device.vendor.id = "1002"
    device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
    device.product.id = "aa88"
    device.product.name = "Barts HDMI Audio [Radeon HD 6800 Series]"
    device.string = "hdmi:0"
    device.buffering.buffer_size = "352768"
    device.buffering.fragment_size = "176384"
    device.access_mode = "mmap+timer"
    device.profile.name = "hdmi-stereo"
    device.profile.description = "Digital Stereo (HDMI)"
    device.description = "Barts HDMI Audio [Radeon HD 6800 Series] Digital Stereo (HDMI)"
    alsa.mixer_name = "ATI R6xx HDMI"
    alsa.components = "HDA:1002aa01,00aa0100,00100200"
    module-udev-detect.discovered = "1"
    device.icon_name = "audio-card-pci"
    ports:
    hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: no)
    properties:
    device.icon_name = "video-display"
    active port: <hdmi-output-0>
    * index: 1
    name: <alsa_output.pci-0000_04_04.0.analog-stereo>
    driver: <module-alsa-card.c>
    flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY FLAT_VOLUME DYNAMIC_LATENCY
    state: SUSPENDED
    suspend cause: IDLE
    priority: 9059
    volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
    balance 0.00
    base volume: 65536 / 100% / 0.00 dB
    volume steps: 65537
    muted: no
    current latency: 0.00 ms
    max request: 0 KiB
    max rewind: 0 KiB
    monitor source: 1
    sample spec: s16le 2ch 48000Hz
    channel map: front-left,front-right
    Stereo
    used by: 0
    linked by: 0
    configured latency: 0.00 ms; range is 0.50 .. 1837.50 ms
    card: 1 <alsa_card.pci-0000_04_04.0>
    module: 24
    properties:
    alsa.resolution_bits = "16"
    device.api = "alsa"
    device.class = "sound"
    alsa.class = "generic"
    alsa.subclass = "generic-mix"
    alsa.name = "Multichannel"
    alsa.id = "Multichannel"
    alsa.subdevice = "0"
    alsa.subdevice_name = "subdevice #0"
    alsa.device = "0"
    alsa.card = "1"
    alsa.card_name = "Xonar DGX"
    alsa.long_card_name = "C-Media Oxygen HD Audio at 0xee00, irq 17"
    alsa.driver_name = "snd_oxygen"
    device.bus_path = "pci-0000:04:04.0"
    sysfs.path = "/devices/pci0000:00/0000:00:05.0/0000:03:00.0/0000:04:04.0/sound/card1"
    device.bus = "pci"
    device.vendor.id = "13f6"
    device.vendor.name = "C-Media Electronics Inc"
    device.product.id = "8788"
    device.product.name = "CMI8788 [Oxygen HD Audio]"
    device.string = "hw:1"
    device.buffering.buffer_size = "352800"
    device.buffering.fragment_size = "352800"
    device.access_mode = "mmap+timer"
    device.profile.name = "analog-stereo"
    device.profile.description = "Analog Stereo"
    device.description = "CMI8788 [Oxygen HD Audio] Analog Stereo"
    alsa.mixer_name = "CMI8786"
    alsa.components = "CS4245 CMI8786"
    module-udev-detect.discovered = "1"
    device.icon_name = "audio-card-pci"
    ports:
    analog-output-headphones: Headphones (priority 9000, latency offset 0 usec, available: unknown)
    properties:
    device.icon_name = "audio-headphones"
    active port: <analog-output-headphones>
    After all of the recommended solutions from the wiki I still get
    $ systemctl status pulseaudio.service
    ● pulseaudio.service
    Loaded: not-found (Reason: No such file or directory)
    Active: inactive (dead)
    $ pulseaudio -vvvv
    I: [pulseaudio] main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted
    I: [pulseaudio] main.c: setrlimit(RLIMIT_RTPRIO, (9, 9)) failed: Operation not permitted
    D: [pulseaudio] core-rtclock.c: Timer slack is set to 50 us.
    D: [pulseaudio] core-util.c: RealtimeKit worked.
    I: [pulseaudio] core-util.c: Successfully gained nice level -11.
    I: [pulseaudio] main.c: This is PulseAudio 6.0
    D: [pulseaudio] main.c: Compilation host: x86_64-unknown-linux-gnu
    D: [pulseaudio] main.c: Compilation CFLAGS: -march=x86-64 -mtune=generic -O2 -pipe -fstack-protector-strong --param=ssp-buffer-size=4 -Wall -W -Wextra -Wno-long-long -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wlogical-op -Wsign-compare -Wformat-security -Wmissing-include-dirs -Wformat-nonliteral -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing -Wwrite-strings -Wno-unused-parameter -ffast-math -fno-common -fdiagnostics-show-option -fdiagnostics-color=auto
    D: [pulseaudio] main.c: Running on host: Linux x86_64 3.19.3-3-ARCH #1 SMP PREEMPT Wed Apr 8 14:10:00 CEST 2015
    D: [pulseaudio] main.c: Found 6 CPUs.
    I: [pulseaudio] main.c: Page size is 4096 bytes
    D: [pulseaudio] main.c: Compiled with Valgrind support: no
    D: [pulseaudio] main.c: Running in valgrind mode: no
    D: [pulseaudio] main.c: Running in VM: no
    D: [pulseaudio] main.c: Optimized build: yes
    D: [pulseaudio] main.c: FASTPATH defined, only fast path asserts disabled.
    I: [pulseaudio] main.c: Machine ID is d36c9fa4b78f4c8cae7f7ad7897683e3.
    I: [pulseaudio] main.c: Session ID is c1.
    I: [pulseaudio] main.c: Using runtime directory /run/user/1000/pulse.
    I: [pulseaudio] main.c: Using state directory /home/hg1/.config/pulse.
    I: [pulseaudio] main.c: Using modules directory /usr/lib/pulse-6.0/modules.
    I: [pulseaudio] main.c: Running in system mode: no
    E: [pulseaudio] pid.c: Daemon already running.
    E: [pulseaudio] main.c: pa_pid_file_create() failed.
    Last edited by bbarcher (2015-04-27 19:16:41)

  • [SOLVED] No Sound with ALSA & Pulseaudio

    Recently I made the transition from Debian to Arch, installed on a
    seperate partition using the chroot install method.
    All went smoothly, with the exception that there is no audio whatsoever.
    Over the last week I've read through the related topics on the wiki and searched the forum,
    but to no avail
    Any assistance would be appreciated.
    Here are some details;
    lspci | grep audio
    00:1b.0 Audio device [0403]: Intel Corporation 82801FB/FBM/FR/FW/FRW
    (ICH6 Family) High Definition Audio Controller [8086:2668] (rev 03)
    lsmod | grep snd
    snd_intel8x0m 9736 0
    snd_ac97_codec 89404 1 snd_intel8x0m
    ac97_bus 910 1 snd_ac97_codec
    snd_hda_codec_realtek 35187 1
    snd_hda_intel 31255 0
    snd_hda_codec 128666 2 snd_hda_codec_realtek,snd_hda_intel
    snd_hwdep 4750 1 snd_hda_codec
    snd_pcm_oss 33509 0
    snd_mixer_oss 12450 1 snd_pcm_oss
    snd_pcm 63880 5
    snd_pcm_oss,snd_ac97_codec,snd_hda_codec,snd_hda_intel,snd_intel8x0m
    snd_page_alloc 5978 3 snd_pcm,snd_hda_intel,snd_intel8x0m
    snd_seq_dummy 1131 0
    snd_seq_oss 25116 0
    snd_seq_midi 4104 0
    snd_seq_midi_event 4484 2 snd_seq_oss,snd_seq_midi
    snd_rawmidi 14828 1 snd_seq_midi
    snd_seq 41044 6
    snd_seq_midi_event,snd_seq_oss,snd_seq_dummy,snd_seq_midi
    snd_seq_device 4256 5
    snd_seq,snd_rawmidi,snd_seq_oss,snd_seq_dummy,snd_seq_midi
    snd_timer 14946 2 snd_pcm,snd_seq
    snd 44566 14
    snd_hda_codec_realtek,snd_pcm_oss,snd_ac97_codec,snd_hwdep,snd_timer,snd_pcm,snd_se$
    soundcore 4386 1 snd
    ls /dev/snd/*
    /dev/snd/controlC0
    /dev/snd/hwC0D2
    /dev/snd/seq
    /dev/snd/timer
    /dev/snd/by-path:
    pci-0000:00:1b.0
    cat /proc/asound/modules
    0 snd_hda_intel
    aplay -lL
    null
    Discard all samples (playback) or generate zero samples (capture)
    pulse
    PulseAudio Sound Server
    default
    Default ALSA Output (currently PulseAudio Sound Server)
    **** List of PLAYBACK Hardware Devices ****
    Screenshots of alsamixer
    http://www.imgbin.org/index.php?page=image&id=15874
    http://www.imgbin.org/index.php?page=image&id=15875
    pavucontrol shows no devices for configuration
    Last edited by naesk (2013-12-13 08:11:44)

    a couple of days i had a similar problem, because sound modules for my internal modem were loaded. maybe you can try to blacklist the snd_hda_codec_realtek module, which looks like a network card.
    you can achieve that by putting
    blacklist snd_hda_codec_realtek
    in /etc/modprobe.d/modprobe.conf and reboot.
    rgds
    hcjl
    Last edited by hcjl (2013-12-13 08:39:48)

  • [SOLVED] no sound with audigy 2 after kernel 2.6.26.2-1 upgrade

    Hello
    today i upgraded my system with pacman and after reboot my audigy 2 stopped working... i read that many have problem with the kernel upgrade...i think it's my problem too... So what can i do?
    thanks in advance...
    Last edited by kcr (2008-08-12 09:28:42)

    sorry, you're right...
    1) these are the package that pacman updates today:
    [2008-08-11 10:36] upgraded kernel26 (2.6.25.11-1 -> 2.6.26.2-1)
    [2008-08-11 10:36] upgraded klibc (1.5-5 -> 1.5-6)
    [2008-08-11 10:36] upgraded klibc-extras (2.4-1 -> 2.4-2)
    [2008-08-11 10:36] upgraded klibc-kbd (1.15.20080312-5 -> 1.15.20080312-6)
    [2008-08-11 10:36] upgraded klibc-module-init-tools (3.2.2-3 -> 3.4-1)
    [2008-08-11 10:36] upgraded klibc-udev (116-3 -> 116-4)
    [2008-08-11 10:36] upgraded lirc-utils (0.8.2-1 -> 0.8.3-1)
    [2008-08-11 10:36] upgraded man-pages (3.05-1 -> 3.06-1)
    [2008-08-11 10:36] upgraded tzdata (2008d-1 -> 2008e-1)
    2) no error messages at all;
    3)no crash, only no sound...
    thanks...

  • [Solved] No sound with ALSA (change default sound card)

    I installed Arch on another laptop and I am unable to get sound working.
    # lspci | grep -i audio
    00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Device 9840
    00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD] FCH Azalia Controller (rev 02)
    Two devices show up in alsamixer. The first (the default, I assume) shows up only an S/PDIF button that I can toggle. If I select the other sound card, I can change volume normally.
    I followed this solution in the wiki with no success.
    How can I make the second sound card the default one?
    Last edited by Gradient (2014-09-09 18:17:14)

    Here is the requested info with the cards in the corrected order:
    $ aplay -lL;
    null
    Discard all samples (playback) or generate zero samples (capture)
    default:CARD=Generic_1
    HD-Audio Generic, ALC3227 Analog
    Default Audio Device
    sysdefault:CARD=Generic_1
    HD-Audio Generic, ALC3227 Analog
    Default Audio Device
    front:CARD=Generic_1,DEV=0
    HD-Audio Generic, ALC3227 Analog
    Front speakers
    surround21:CARD=Generic_1,DEV=0
    HD-Audio Generic, ALC3227 Analog
    2.1 Surround output to Front and Subwoofer speakers
    surround40:CARD=Generic_1,DEV=0
    HD-Audio Generic, ALC3227 Analog
    4.0 Surround output to Front and Rear speakers
    surround41:CARD=Generic_1,DEV=0
    HD-Audio Generic, ALC3227 Analog
    4.1 Surround output to Front, Rear and Subwoofer speakers
    surround50:CARD=Generic_1,DEV=0
    HD-Audio Generic, ALC3227 Analog
    5.0 Surround output to Front, Center and Rear speakers
    surround51:CARD=Generic_1,DEV=0
    HD-Audio Generic, ALC3227 Analog
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
    surround71:CARD=Generic_1,DEV=0
    HD-Audio Generic, ALC3227 Analog
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
    hdmi:CARD=Generic,DEV=0
    HD-Audio Generic, HDMI 0
    HDMI Audio Output
    **** List of PLAYBACK Hardware Devices ****
    card 0: Generic_1 [HD-Audio Generic], device 0: ALC3227 Analog [ALC3227 Analog]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: Generic [HD-Audio Generic], device 3: HDMI 0 [HDMI 0]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    $ for i in /proc/asound/card[0-9]*; do echo "--- $i ---";amixer -c $(cat $i/id); done;
    --- /proc/asound/card0 ---
    Simple mixer control 'Master',0
    Capabilities: pvolume pvolume-joined pswitch pswitch-joined
    Playback channels: Mono
    Limits: Playback 0 - 87
    Mono: Playback 87 [100%] [0.00dB] [on]
    Simple mixer control 'Headphone',0
    Capabilities: pvolume pswitch
    Playback channels: Front Left - Front Right
    Limits: Playback 0 - 87
    Mono:
    Front Left: Playback 87 [100%] [0.00dB] [on]
    Front Right: Playback 87 [100%] [0.00dB] [on]
    Simple mixer control 'Speaker',0
    Capabilities: pvolume pswitch
    Playback channels: Front Left - Front Right
    Limits: Playback 0 - 87
    Mono:
    Front Left: Playback 87 [100%] [0.00dB] [on]
    Front Right: Playback 87 [100%] [0.00dB] [on]
    Simple mixer control 'Mic',0
    Capabilities: pvolume pswitch
    Playback channels: Front Left - Front Right
    Limits: Playback 0 - 31
    Mono:
    Front Left: Playback 31 [100%] [12.00dB] [off]
    Front Right: Playback 31 [100%] [12.00dB] [off]
    Simple mixer control 'Mic Boost',0
    Capabilities: volume
    Playback channels: Front Left - Front Right
    Capture channels: Front Left - Front Right
    Limits: 0 - 3
    Front Left: 3 [100%] [36.00dB]
    Front Right: 3 [100%] [36.00dB]
    Simple mixer control 'Capture',0
    Capabilities: cvolume cswitch
    Capture channels: Front Left - Front Right
    Limits: Capture 0 - 63
    Front Left: Capture 39 [62%] [12.00dB] [on]
    Front Right: Capture 39 [62%] [12.00dB] [on]
    Simple mixer control 'Auto-Mute Mode',0
    Capabilities: enum
    Items: 'Disabled' 'Enabled'
    Item0: 'Enabled'
    Simple mixer control 'Internal Mic Boost',0
    Capabilities: volume
    Playback channels: Front Left - Front Right
    Capture channels: Front Left - Front Right
    Limits: 0 - 3
    Front Left: 3 [100%] [36.00dB]
    Front Right: 3 [100%] [36.00dB]
    Simple mixer control 'Mute-LED Mode',0
    Capabilities: enum
    Items: 'On' 'Off' 'Follow Master'
    Item0: 'Follow Master'
    --- /proc/asound/card1 ---
    Simple mixer control 'IEC958',0
    Capabilities: pswitch pswitch-joined
    Playback channels: Mono
    Mono: Playback [off]
    $ lspci -vnn | grep -A 1 -i audio
    00:01.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Device [1002:9840]
    Subsystem: Hewlett-Packard Company Device [103c:22cd]
    00:14.2 Audio device [0403]: Advanced Micro Devices, Inc. [AMD] FCH Azalia Controller [1022:780d] (rev 02)
    Subsystem: Hewlett-Packard Company Device [103c:22cd]
    emeres wrote:What do you mean 'is visible in alsamixer'? F6 does not list it? Did you use index or enable?
    Yes, that is what I meant; F6 did not list them both when I use your options. I must have done something wrong the first time, because now it does.
    emeres wrote:Read this alsa documentation and 'mad modprobe'.
    Thanks for the link. That was what I was looking for.

  • [SOLVED] No sound with HDMI output

    aplay -l:
    **** List of PLAYBACK Hardware Devices ****
    card 0: PCH [HDA Intel PCH], device 0: ALC269VB Analog [ALC269VB Analog]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0]
    Subdevices: 0/1
    Subdevice #0: subdevice #0
    lsmod | grep snd:
    lsmod | grep snd
    snd_hda_codec_hdmi 23672 1
    snd_hda_codec_realtek 60377 1
    snd_hda_intel 24053 7
    snd_hda_codec 94273 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel
    snd_hwdep 6300 1 snd_hda_codec
    snd_pcm 74958 4 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
    snd_page_alloc 7217 2 snd_pcm,snd_hda_intel
    snd_timer 18966 1 snd_pcm
    snd 58997 20 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_hda_codec,snd_hda_intel
    soundcore 5410 1 snd
    I tried the solution in the wiki. The sound would work when I issued the aplay command, but then when I set the .asoundrc file, sound would not work (after logging out and logging back in). I also tried this solution from another thread, but I mistakenly forgot to make backups of the two respective files and now I have no sound at all. Help would be much appreciated! Thanks!
    Edit:
    Also tried this, didn't work either.
    Edit2:
    Finally got it solved! All I had to do was go into alsamixer and unmute the "S/PDIF" channel, follow the instructions from the wiki (see link above), and I finally got the sound to work.
    Last edited by bl3ndy (2012-07-08 20:05:18)

    Check this:
    https://discussions.apple.com/message/20616650#20616650

  • [SOLVED] no sound with 32bit prefix wine

    Hello,
    I am trying to play Ultra Street Fighter IV and I am running into a few issues.
    My standard wine prefix is a 64bit one.
    With it, I can play the game, hear the audio fine, but the videos/cut scenes don't appear at all. They're completely skipped.
    Looking around I found someone on wine db saying wmp9 fixed it for him, and so I tried.
    Unfortunately for wmp9 I need a 32bit wine prefix.
    I created one, winetricks wmp9 and yes the videos did play, success! But alas now the game has no sound... the in-game-videos do but not the game itself.
    Running winecfg on the 32bit wine prefix, I can hear the test sound, so I am not sure what the problem is.
    I have a wine-git build from the 14th September.
    I have also tried with a 1.7.24 csmt build and it was the same.
    I do not believe the issue is in wine itself, but who knows.
    I have tried setting Windows to XP or 7 and the result was the same.
    I have tried playing with winetricks settings but no result.
    I am running on Arch Linux 64b.
    I believe I have all the packages needed but again...:
    multilib/lib32-openal, multilib/lib32-libpulse multilib/lib32-alsa-plugins multilib/lib32-alsa-lib multilib/lib32-alsa-oss
    With a default wine command line, I do not see any particular error related to audio.
    I tried WINEDEBUG=+all, but it's way too much stuff... no clue what is important or not.
    The command line I use:
    WINEPREFIX=/home/<32BIT_WINE> WINEARCH='win32' wine-csmt SSFIV.exe
    I do not have any lib32 gstreamer installed, but I believe wine doesn't use gstreamer anymore so it shouldn't be a problem right?
    I am using pulse and checked in pavucontrol that there is no stream for the game.
    Thanks for any help!
    Last edited by gee (2014-10-03 01:14:15)

    V1del wrote:I think it needs a native XAudio DLL that may have been installed by some other game when you installed it but lacks on the default 32bit fresh prefix, so check your 64bit wine prefix if it has a native XAudio dll somewhere and try to copy that over to the win32 one (sorry no info on the actual version/location not on my arch right now)
    Good guess!
    I have some xaudio files in the 64b one but not the 32bit one.
    I have no clue where that came from. Let's try copying them.
    How did you even know about that?
    olive wrote:For 32bit audio you need to install lib32-mpg123. But maybe the problem is with your application. Does it work with other 32 bit applications? In wine, it's best to include all the optional dependencies to have everything working, please do pacman -Qi wine and ensure that the optional dependencies are installed (unless you know you do not need something).
    I already have that library and all the optdepts of wine as well.
    Now as for another app it's a good question, let me see.
    Thanks guys!

Maybe you are looking for

  • Optimize the following update on per_all_assignments_F

    Hi I am trying to optimize this sql which is taking a long time to complete. declare cursor c1 is select person_id, annual_rt from xxdl.xxdl_papf_scrambling_view; begin for i in c1 loop update PER_ALL_ASSIGNMENTS_F set as_attribute4 = i.annual_rt whe

  • Webutil error while generate excel form

    Hi In my forms appl. I use webutil in order to generate excel reports I have to midtier instances both running on a separate host. End users connect through a WLB frontend. At one of the midtiers, when generating a excel report using webutil "error w

  • Pdf file not loading to website

    I created a newsletter in pages, saved it as a pdf and emailed it to our web person. They have a pc with microsoft windows. They can open the document & read it just fine, but can't get it to upload to the website. Has anyone else come across this pr

  • Why can't I see image thumbnails of my .psdx files in my Creative Cloud Connection folder?

    I am saving my projects to my Creative Cloud account and use the CC Connection. My .psdx files appear in my CC Connection folder as icons, not as image thumbnails. What am I doing wrong?

  • Service Entry Deletion after MIRO

    Dear All, After MIRO of service entry sheet, we have option to delete the service entry sheet, although we cannot change the data. A meesage appears when we revoked the entry sheet as "An invoice already exists for this entry sheet" - message 11388.