[SOLVED] Pacman is unable to look up keys?

Hi there,
I'm using Arch Linux for a while, and I'm using pacman 4.0 as well as key signing. It works without any problems, and I run system upgrades every 3 days or so.
Today i just want to initiate the upgrade with "pacman -Syu" as usual, but pacman refuses it because it is unable to check the keys. Since it did work perfectly before, I - of course - did pacman key initialization and configured the pacman.conf properly.
:: Synchronizing package databases...
core is up to date
extra is up to date
community is up to date
:: Starting full system upgrade...
resolving dependencies...
warning: dependency cycle detected:
warning: udev will be installed before its util-linux dependency
looking for inter-conflicts...
Targets (25): binutils-2.22-5 coreutils-8.16-2 dhcpcd-5.5.6-1 expat-2.1.0-1
filesystem-2012.2-4 gcc-4.7.0-3 gcc-libs-4.7.0-3 glibc-2.15-10
gnutls-3.0.18-1 kmod-7-2 krb5-1.10.1-2 libarchive-3.0.4-1
libltdl-2.4.2-5 libpng-1.5.10-1 libtool-2.4.2-5 linux-3.2.14-1
linux-api-headers-3.3-1 mkinitcpio-0.8.6-2 pcmciautils-018-4
perl-net-ssleay-1.46-1 syslinux-4.05-4 syslog-ng-3.3.4-5
tzdata-2012c-1 udev-181-9 util-linux-2.21.1-2
Total Installed Size: 245.35 MiB
Net Upgrade Size: 5.96 MiB
Proceed with installation? [Y/n] y
(25/25) checking package integrity [######################] 100%
error: libarchive: key "5C2E46A0F53A76ED" is unknown
error: key "5C2E46A0F53A76ED" could not be looked up remotely
error: failed to commit transaction (invalid or corrupted package)
Errors occurred, no packages were upgraded.
My pacman.conf looks like this (important parts)
# PGP signature checking
# NOTE: None of this will work without running `pacman-key --init` first.
# The compiled in default is equivalent to the following line. This requires
# you to locally sign and trust packager keys using `pacman-key` for them to be
# considered valid.
#SigLevel = Optional TrustedOnly
# If you wish to check signatures but avoid local sign and trust issues, use
# the following line. This will treat any key imported into pacman's keyring as
# trusted.
SigLevel = Optional TrustAll
# For now, off by default unless you read the above.
#SigLevel = Never
[core]
SigLevel = PackageRequired
Include = /etc/pacman.d/mirrorlist
[extra]
SigLevel = PackageOptional
Include = /etc/pacman.d/mirrorlist
[community]
SigLevel = PackageOptional
Include = /etc/pacman.d/mirrorlist
gpg.conf
no-greeting
no-permission-warning
lock-never
keyserver hkp://keys.gnupg.net
keyserver-options timeout=10
I also tried increasing the timeout and changing the keyserver to hkp://pgp.mit.edu:11371, as adviced in other threads, but no help.
Cleaning the caches with pacman -Sc didn't help ether. I also restarted the system several times, but no success.
Any help? Thanks!
Last edited by silentsnake (2012-04-07 14:56:24)

Cleaning the cache with pacman -Sc will leave the most recent downloaded version there, so delete the package manually from the cache and run pacman -Syu again.

Similar Messages

[Solved] Pacman unable to look up keys remotely

My [testing] install has been running pacman 4 ever since Allan put a provisional package up for testing (outside the [testing] repo). The key verification worked okay.
However, I am not able to upgrade any more packages it seems, due to pacman being unable to look up the keys online. I don't know if the gnupg 2 move has anything to do with it. I already tried changing the key server in /etc/pacman.d/gnupg/gpg.conf from the default one to the MIT one (which seems to be a lot more responsive). That doesn't help any.
This is what pacman spits out:
error: libnfs: key "DB323392796CA067" is unknown
error: key "DB323392796CA067" could not be looked up remotely
error: afpfs-ng: key "DB323392796CA067" is unknown
error: key "DB323392796CA067" could not be looked up remotely
error: libshairport: key "DB323392796CA067" is unknown
error: key "DB323392796CA067" could not be looked up remotely
error: xbmc: key "DB323392796CA067" is unknown
error: key "DB323392796CA067" could not be looked up remotely
error: failed to commit transaction (invalid or corrupted package (PGP signature))
Errors occurred, no packages were upgraded.
Curiously, all those packages are xbmc 11.0 and its new dependencies. It's just one key. I ran pacman-key -u and it says there is no need for updating (I may be misled about the purpose of the -u option though ).
Any pointers?
Last edited by .:B:. (2012-03-28 14:16:38)

Thanks.
Too bad there was nothing about that on the general dev ML, or I must have overlooked it. I have followed the discussion about dropping the gnupg 1.4 branch, but no mention whatsoever of this breakage that the patch mentioned in the dev ML will fix.
Last edited by .:B:. (2012-03-28 14:21:46)

[SOLVED] pacman is unable to remove openbox

I installed openbox yesterday to try it out and now when I try to remove it by writing
sudo pacman -Rns openbox
I get the following error,
error: target not found
I've tried updating my mirrorlist with reflector, also tried pacman -Syyu but I keep getting the same error again and again. Where did I go wrong?
Last edited by chosentorture (2014-11-30 20:34:13)

Head_on_a_Stick wrote:
What is the output of:
pacman -Q openbox
It looks like it's already gone to me...
It says,
error: package 'openbox' was not found
But, I didn't remove openbox myself. I had also installed fluxbox with openbox and I only removed fluxbox. I also removed a .fluxbox directory from ~/

[Solved] Pacman -Su stuck at downloading required keys

With updating my system (with pacman -Syu), pacman seems stuck with the last operation "Checking keys in the keyring". What I see is:
(167/167) checking keys in keyring [####################################] 100%
downloading required keys...
After 20 minutes or so I killed the process and initialized the keyring from scratch, following the instructions on the wiki, hoping this would give some clues. Unfortunately, this problem still persists.
Any suggestions on what may be the problem, or how to fix it?
Last edited by Floris (2015-02-12 14:04:31)

Thanks for that hint. The debug showed that it was fetching a key remotely, and then nothing. With that, I was able to find this similar thread on this forum. I followed the suggested procedure:
mauritiusdadd wrote:# rm -R /etc/pacman.d/gnupg/
# rm -R /root/.gnupg/ # only if the directory exists
# gpg --refresh-keys
# pacman-key --init && pacman-key --populate
# pacman-key --refresh-keys
and it solved the stall. I think that the second instruction really helped, because I did rebuild the keychain multiple times today. Apparently something was cached in the .gnupg folder that might have interfered.
Thanks!
Last edited by Floris (2015-02-12 16:54:23)

[SOLVED] Pacman won't look up gpg keys

Ever since I upgraded gnupg/gpgme today, pacman won't look up (or rather fail looking up) any missing GPG keys. Relevant part of pacman's output:
debug: checking signature for /var/cache/pacman/pkg/privoxy-3.0.19-2-i686.pkg.tar.xz
debug: 1 signatures returned
debug: fingerprint: C06086337C50773E
debug: summary: key missing
debug: status: No public key
debug: timestamp: 1328647189
debug: exp_timestamp: 0
debug: validity: unknown; reason: Success
debug: key lookup failed, unknown key
debug: signature is not valid
debug: looking up key C06086337C50773E locally
debug: key lookup failed, unknown key
error: privoxy: key "C06086337C50773E" is unknown
debug: looking up key C06086337C50773E remotely
debug: key lookup failed, unknown key
debug: looking up key 7C50773E remotely
debug: key lookup failed, unknown key
debug: gpg error: End of file
error: key "C06086337C50773E" could not be looked up remotely
error: failed to commit transaction (invalid or corrupted package (PGP signature))
Errors occurred, no packages were upgraded.
Failing to import the key directly through pacman, I tried
pacman-key --recv-key C06086337C50773E
which successfully added the key to my keyring.
I could then install the package. I also tried switching to different keyserves, but without success.
Everything pacman{, -key} related worked fine until the update, but I can't say for certain that it was the gnupg/gpgme update that broke something.
Does anyone else have this issue or is there something wrong with my setup? I already thought of opening a bug report, but I want to make sure it's not my fault.
btw: Hi, everyone :)
Last edited by vehk (2012-03-28 07:54:28)

This wasn't explicitly stated above, but to do the manual import with pacman-key, I had to prefix the fingerprint with 0x, as so:
$ sudo pacman-key -r 0x5C2E46A0F53A76ED
However, the default keyserver is giving me problems currently:
$ sudo pacman-key -r 0x5C2E46A0F53A76ED
Password:
gpg: requesting key F53A76ED from hkp server keys.gnupg.net
gpgkeys: HTTP fetch error 7: couldn't connect: End of file
gpg: no valid OpenPGP data found.
gpg: Total number processed: 0
==> ERROR: Remote key not fetched correctly from keyserver.
So in the end, I used a different keyserver:
sudo pacman-key -r 0x5C2E46A0F53A76ED --keyserver hkp://subkeys.pgp.net
Hope that helps anyone else.

Unable to create foreign key: InvalidArgument=Value of '0' is not valid for 'index'. Parameter name: index

I am running an SQL(CE) script to create a DB. All script commands succeed, but the DB get "broken" after creating the last costaint: after running the script, viewing table properties of Table2 and clicking on "Manage relations" gives the following error: Unable to create foreign key: InvalidArgument=Value of '0' is not valid for 'index'. Parameter name: index. Wondering what does that refer to...
Here it is the script. Please note that no error is thrown by running the following queries (even from code that passing the queries by hand, one-by-one to sql server management studio).
CREATE TABLE [table1] (
[id_rubrica] numeric(18,0) NOT NULL
, [id_campo] numeric(18,0) NOT NULL
, [nome] nvarchar(100) NOT NULL
GO
ALTER TABLE [table1] ADD PRIMARY KEY ([id_rubrica],[id_campo]);
GO
CREATE UNIQUE INDEX [UQ__m_campi] ON [table1] ([id_campo] Asc);
GO
CREATE TABLE [table2] (
[id_campo] numeric(18,0) NOT NULL
, [valore] nvarchar(4000) NOT NULL
GO
ALTER TABLE [table2] ADD PRIMARY KEY ([id_campo],[valore]);
GO
ALTER TABLE [table2] ADD CONSTRAINT [campo_valoriFissi] FOREIGN KEY ([id_campo]) REFERENCES [table1]([id_campo]);
GO
Sid (MCP - http://www.sugata.eu)

I know this is kind of old post, but did this realy solved your problem?
I'm getting this same error message after adding a FK constraint via UI on VS2008 Server Explorer.
I can add the constraint with no errors, but the constraint is not created on the DataSet wizard (strongly typed datasets on Win CE 6) and when I click "Manage Relations" on the "Table Properties" this error pop out:
"InvalidArgument=Value or '0' is not valid for 'index'.
Parameter name: index"
Even after vreating my table with the relation in SQL the same occurs:
CREATE TABLE pedidosRastreios (
    idPedidoRastreio INT NOT NULL IDENTITY PRIMARY KEY,
    idPedido INT NOT NULL CONSTRAINT FK_pedidosRastreios_pedidos REFERENCES pedidos(idPedido) ON DELETE CASCADE,
    codigo NVARCHAR(20) NOT NULL

TMADMIN_CAT:1607: ERROR: Unable to initialize public key subsystem

Hi All,
I have installed HCM 9 with 8.49.08 PeopleTools on CentOS 5.3 Linux. Everything went fine (I have completed the creation of database) until I am about to start the application server that I have just created. I am getting this error, "TMADMIN_CAT:1607: ERROR: Unable to initialize public key subsystem".
@Nicolas
I have followed the instructions in your blog (it's very helpful). However I am now stack with this error.
Screenshot of the error after trying to boot the appserv:
PeopleSoft Domain Boot Menu
Domain Name: DMHCM
1) Boot (Serial Boot)
2) Parallel Boot
q) Quit
Command to execute (1-2, q) [q]: 1
psappsrv.cfg has changed archiving old one...
Copying DMHCM/Archive/psappsrv.cfg to DMHCM/Archive/psappsrv_092509_0140_32.cfg
Attempting to boot bulletin board...
tmadmin - Copyright (c) 1996-1999 BEA Systems, Inc.
Portions * Copyright 1986-1997 RSA Data Security, Inc.
All Rights Reserved.
Distributed under license by BEA Systems, Inc.
Tuxedo is a registered trademark.
TMADMIN_CAT:1607: ERROR: Unable to initialize public key subsystem
==============ERROR!================
Boot attempt encountered errors!. Check the TUXEDO log for details.
==============ERROR!================
Do you wish to see the error messages in the APPSRV.LOG file? (y/n) [n] :
Here the content of the ULOG:
CentOSLinux:psoft /applications/speople/pt849/appserv >tail ULOG.092509
014032.CentOSLinux!tmadmin.24422.3086362304.-2: 09-25-2009: Tuxedo Version 9.1, 32-bit
014032.CentOSLinux!tmadmin.24422.3086362304.-2: GP_CAT:1345: ERROR: pif: can't load 'registry.so'
014032.CentOSLinux!tmadmin.24422.3086362304.-2: LIBSEC_CAT:22: ERROR: Unable to realize the ecsec_map_proof interface implementation native/security/map_proof. Error code (-5000)
014032.CentOSLinux!tmadmin.24422.3086362304.-2: LIBTUX_CAT:6275: ERROR: Unable to initialize public key subsystem (-3003)
014032.CentOSLinux!tmadmin.24422.3086362304.-2: LIBTUX_CAT:6204: ERROR: Could not initialize public key subsystem
020404.CentOSLinux!tmadmin.25119.3086403264.-2: 09-25-2009: Tuxedo Version 9.1, 32-bit
020404.CentOSLinux!tmadmin.25119.3086403264.-2: GP_CAT:1345: ERROR: pif: can't load 'registry.so'
020404.CentOSLinux!tmadmin.25119.3086403264.-2: LIBSEC_CAT:22: ERROR: Unable to realize the ecsec_map_proof interface implementation native/security/map_proof. Error code (-5000)
020404.CentOSLinux!tmadmin.25119.3086403264.-2: LIBTUX_CAT:6275: ERROR: Unable to initialize public key subsystem (-3003)
020404.CentOSLinux!tmadmin.25119.3086403264.-2: LIBTUX_CAT:6204: ERROR: Could not initialize public key subsystem
This seems to be the main culprit... GP_CAT:1345: ERROR: pif: can't load 'registry.so' and I have searched this forum and found several suggestions like make sure that LD_LIBRARY_PATH is correctly set .. incorrect permssions, delete the .adm ... etc. I have done all of this suggestions. I even re-installed the Tuxedo 9.1 with the assumption that some files like resistry,.so might have been corrupted but this all did not resolved the issue. I believe I have done my I could before going here asking for help.
Here is the content of my .bash_profile:
# .bash_profile
PS1='CentOSLinux:$USER $PWD >'
# Get the aliases and functions
if [ -f ~/.bashrc ]; then
. ~/.bashrc
fi
# User specific environment and startup programs
PATH=$PATH:$HOME/bin
export PATH
unset USERNAME
export BEA=/applications/speople/bea
export TUXDIR=/applications/speople/bea/tuxedo91
export BEA_HOME=/applications/speople/bea/weblogic92
export ORACLE_HOME=/applications/oracle/10.2.0
export PATH=$PATH:$ORACLE_HOME/bin
LD_LIBRARY_PATH=$ORACLE_HOME/lib; export LD_LIBRARY_PATH
LIBPATH=$TUXDIR/lib:$LIBPATH:/usr/lib; export LIBPATH
export PS_HOME=/applications/speople/pt849
. $PS_HOME/psconfig.sh
I would really appreciate any help on this issue. Many thanks.

Please, check if you have the following RPM installed :
[root@centos ~]# more /etc/redhat-release
CentOS release 5.3 (Final)
[root@centos ~]# rpm -q compat-libstdc++-33-3.2.3-61.i386
compat-libstdc++-33-3.2.3-61
[root@centos ~]#I tested it on CentOS5.3, everything is working fine. Please, see below all the installation steps :
1. Install CentOS 5.3 with all the default settings
2. Install Tuxedo
2.1 => Modify the file ./linux/sles9/base/tuxedo91_32_SLES_9_x86.bin
mv ./linux/sles9/base/tuxedo91_32_SLES_9_x86.bin /tmp/tuxedo91_32_SLES_9_x86.bin
cat /tmp/tuxedo91_32_SLES_9_x86.bin|sed 's/export LD_ASSUME_KERNEL/#xport LD_ASSUME_KERNEL/' > ./linux/sles9/base/tuxedo91_32_SLES_9_x86.bin2.2 => Download and install JDK5
./jdk-1_5_0_21-linux-i586-rpm.bin
For inquiries please contact: Sun Microsystems, Inc., 4150
Network Circle, Santa Clara,   California 95054, U.S.A.
(LFI#143333/Form ID#011801)
Do you agree to the above license terms? [yes or no]
yes
Unpacking...
Checksumming...
0
0
Extracting...
UnZipSFX 5.50 of 17 February 2002, by Info-ZIP ([email protected]).
inflating: jdk-1_5_0_21-linux-i586.rpm
Preparing...                ########################################### [100%]
   1:jdk                    ########################################### [100%]
Done.
[root@centos JDK5]# # /usr/sbin/alternatives --install /usr/bin/java java /usr/java/jdk1.5.0_21/bin/java 2
[root@centos JDK5]# /usr/sbin/alternatives --config java
There are 4 programs which provide 'java'.
Selection    Command
* 1           /usr/lib/jvm/jre-1.6.0-openjdk/bin/java
   2           /usr/lib/jvm/jre-1.4.2-gcj/bin/java
+ 3           /usr/java/jdk1.5.0_16/bin/java
   4           /usr/java/jdk1.5.0_21/bin/java
Enter to keep the current selection[+], or type selection number: 4
[root@centos JDK5]# java -version
java version "1.5.0_21"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_21-b01)
Java HotSpot(TM) Client VM (build 1.5.0_21-b01, mixed mode, sharing)
[root@centos JDK5]#2.3 => Modify the file install.sh
The line
sh $INSTALL_BINARY -f $SILENT_INSTALL_FILE > $INSTALLER_OUTPUT;becomes
sh $INSTALL_BINARY LAX_VM /usr/java/jdk1.5.0_21/jre/bin/java -f $SILENT_INSTALL_FILE > $INSTALLER_OUTPUT;2.4 => run the Tuxedo Installer
sh ./install.sh3. Install Peopletools
4. Install the RPM (from the CentOS 5.3 DVD) - this is required for psadmin
rpm -Uvh compat-libstdc++-33-3.2.3-61.i386.rpm5. Install additional RPMs for Oracle
rpm -Uvh libXp-1.0.0-8.1.el5.i386.rpm
rpm -Uvh kernel-headers-2.6.18-128.el5.i386.rpm
rpm -Uvh glibc-headers-2.5-34.i386.rpm
rpm -Uvh glibc-devel-2.5-34.i386.rpm
rpm -Uvh compat-gcc-34-3.4.6-4.i386.rpm
rpm -Uvh libgomp-4.3.2-7.el5.i386.rpm
rpm -Uvh gcc-4.1.2-44.el5.i386.rpm
rpm -Uvh gcc-c++-4.1.2-44.el5.i386.rpm
rpm -Uvh compat-glibc-headers-2.3.4-2.26.i386.rpm
rpm -Uvh compat-glibc-2.3.4-2.26.i386.rpm
rpm -Uvh glibc-utils-2.5-34.i386.rpm
rpm -Uvh compat-db-4.2.52-5.1.i386.rpm
rpm -Uvh compat-gcc-34-c++-3.4.6-4.i386.rpm
rpm -Uvh compat-libstdc++-296-2.96-138.i386.rpm
rpm -Uvh gcc43-4.3.2-7.el5.i386.rpm
rpm -Uvh gcc43-c++-4.3.2-7.el5.i386.rpm6. Install Oracle (database or client depending of the config)
6.1 => add the entry in tnsnames.ora
6.2 => create the symbolic link
[oracle@centos oracle]$ cd $ORACLE_HOME/lib
[oracle@centos lib]$ ln -s libclntsh.so libclntsh.so.9.06.3 => make the ORACLE_HOME readable and executable for everbody
7. psoft user
7.1 => The .bash_profile
[psoft@centos ~]$ more .bash_profile
# .bash_profile
# Get the aliases and functions
if [ -f ~/.bashrc ]; then
        . ~/.bashrc
fi
# User specific environment and startup programs
export ORACLE_HOME=/oracle/10.2
PATH=$PATH:$HOME/bin:$ORACLE_HOME/bin
export PATH
export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:$ORACLE_HOME/lib
export PS_HOME=/psoft/psoft849
. $PS_HOME/psconfig.sh
[psoft@centos ~]$7.2 => Modify the file $PS_HOME/psconfig.sh
PS_HOSTTYPE=redhat-4-ia32;export PS_HOSTTYPE8. psadmin, create the new domain, and start
PeopleSoft Domain Boot Menu
     Domain Name: DMOHRMS9
1) Boot (Serial Boot)
2) Parallel Boot
q) Quit
Command to execute (1-2, q) [q]: 1
psappsrv.cfg has changed archiving old one...
Copying DMOHRMS9/Archive/psappsrv.cfg to DMOHRMS9/Archive/psappsrv_092609_1218_35.cfg
Attempting to boot bulletin board...
tmadmin - Copyright (c) 1996-1999 BEA Systems, Inc.
Portions * Copyright 1986-1997 RSA Data Security, Inc.
All Rights Reserved.
Distributed under license by BEA Systems, Inc.
Tuxedo is a registered trademark.
No bulletin board exists. Entering boot mode.
INFO: BEA Tuxedo, Version 9.1, 32-bit, Patch Level 036
INFO: Serial #: 650522264137-2065448083901, Expiration NONE, Maxusers 1000000
INFO: Licensed to: Oracle-Peoplesoft-ISV
Booting admin processes ...
exec BBL -A :
        process id=26552 ... Started.
1 process started.
Attempting to boot ...
INFO: BEA Tuxedo, Version 9.1, 32-bit, Patch Level 036
INFO: Serial #: 650522264137-2065448083901, Expiration NONE, Maxusers 1000000
INFO: Licensed to: Oracle-Peoplesoft-ISV
Booting server processes ...
exec PSWATCHSRV -A -- -ID 176290 -C psappsrv.cfg -D DMOHRMS9 -S PSWATCHSRV :
        process id=26555 ... Started.
exec PSAPPSRV -s@../psappsrv.lst -s@../psqcksrv.lst -sICQuery -sSqlQuery:SqlRequest -- -C psappsrv.cfg -D DMOHRMS9 -S PSAPPSRV :
        process id=26556 ... Started.
exec PSAPPSRV -s@../psappsrv.lst -s@../psqcksrv.lst -sICQuery -sSqlQuery:SqlRequest -- -C psappsrv.cfg -D DMOHRMS9 -S PSAPPSRV :
        process id=26560 ... Started.
exec PSAPPSRV -s@../psappsrv.lst -s@../psqcksrv.lst -sICQuery -sSqlQuery:SqlRequest -- -C psappsrv.cfg -D DMOHRMS9 -S PSAPPSRV :
        process id=26564 ... Started.
exec PSSAMSRV -A -- -C psappsrv.cfg -D DMOHRMS9 -S PSSAMSRV :
        process id=26568 ... Started.
exec PSMONITORSRV -A -- -ID 176290 -C psappsrv.cfg -D DMOHRMS9 -S PSMONITORSRV :
        process id=26571 ... Started.
exec JSL -A -- -d unused -n //centos.phoenix-nga:9000 -m 1 -M 3 -I 5 -j ANY -x 40 -S 10 -c 1000000 -w JSH :
        process id=26574 ... Started.
exec JREPSVR -A -- -W -P /psoft/psoft849/appserv/DMOHRMS9/jrepository :
        process id=26576 ... Started.
8 processes started.HTH,
Nicolas.

Error "Unable to find method:key" on UM configuration iView

When i try to click on the UM configuration in System Administration --> System configuration i am getting the Error Unable to find method:key Does any one came across the same Issue. Please help ?

Server restart should help. See note 792929.

[useless, SOLVED] Pacman shows package corrupted while upgrading

I pacman -Syu'ed my system after a week & there was these error of cyclic dependancy while installing gcc package. So, I issued this command:
sudo pacman -S gcc gcc-libs gcc-ada gcc-fortran gcc-objc libtool
While instaling, it showed that gcc's package is corrupted.
But, later I tried installing it using
sudo pacman -U gcc-4.6.2-1-x86_64.pkg.tar.xz gcc-libs-4.6.2-1-x86_64.pkg.tar.xz gcc-ada-4.6.2-1-x86_64.pkg.tar.xz gcc-fortran-4.6.2-1-x86_64.pkg.tar.xz gcc-objc-4.6.2-1-x86_64.pkg.tar.xz libtool-2.4
and it installed correctly.
It seems like local repo had the wrong md5 of the gcc package. How come?
Last edited by shadyabhi (2011-11-04 13:44:01)

karol wrote:Can you post the exact output, the 'corrupted' message?
shadyabhi@archlinux ~ $ sudo pacman -S gcc
warning: gcc-4.6.2-1 is up to date -- reinstalling
resolving dependencies...
looking for inter-conflicts...
Targets (1): gcc-4.6.2-1 [17.03 MB]
Total Download Size: 0.00 MB
Total Installed Size: 67.22 MB
Proceed with installation? [Y/n] Y
:: File gcc-4.6.2-1-x86_64.pkg.tar.xz is corrupted. Do you want to delete it? [Y/n] ^C [----------------------------------------------------------------] 0%
Interrupt signal received
shadyabhi@archlinux ~ $ sudo pacman -U /var/cache/pacman/pkg/gcc-4.6.2-1-x86_64.pkg.tar.xz
warning: gcc-4.6.2-1 is up to date -- reinstalling
resolving dependencies...
looking for inter-conflicts...
Targets (1): gcc-4.6.2-1 [17.06 MB]
Total Download Size: 0.00 MB
Total Installed Size: 66.82 MB
Proceed with installation? [Y/n] Y
(1/1) checking package integrity [################################################################] 100%
(1/1) checking for file conflicts [################################################################] 100%
(1/1) upgrading gcc [################################################################] 100%
shadyabhi@archlinux ~ $
I was successful in installing that same package if I used -U option. Thats some serious bug in pacman which should be looked into.
Please tell me as to what more info should I provide to be of more help.
Last edited by shadyabhi (2011-11-04 13:19:15)

Unable to validate message; key used for decrypting message is invalid;

When trying to decrypt an RNIF message in our SAP XI system we are running into an issue with below error message:
"Unable to validate message; key used for decrypting message is invalid; expected keystore entry: SSL-<SID>; keystore entry used: null"
The keystore administrator role is mapped to XIAFUSER. We validated the decryption using the J2EE Private Key thru a third-party (non-SAP) tool and it works fine. The keystore SSL-<SID> contains the Private Key and Cert from our CA. The message was encrypted using the Public Key of J2ee engine.
We were unable to generate more details even after increasing the log level. The security.log is the only place showing the above error message.

The folder C:\j2sdk1.4.2_13\jre\lib\security contains the Java Cryptography Extension (JCE) files - 'local_policy.jar' and 'US_export_policy.jar' .The default files will have a size of 3 kb.These need to be replaced by JCE Unlimited Strength Jurisdiction Policy Files - 'local_policy.jar' and 'US_export_policy.jar' which are of size 5kb. In brief, C:\j2sdk1.4.2_13\jre\lib\security should contain the files - 'local_policy.jar' and 'US_export_policy.jar' and their size should be 5kb (and not 3kb). After we did this change the decrypt worked fine.

[SOLVED] Pacman and yaourt not working when run with "sudo"

Hi,
I am an Arch newbie, just installed Arch 3.10 on my machine. I access internet through a proxy server and I'm facing this strange problem -
Pacman is unable to fetch packages when I run it through sudo - "sudo pacman -S smplayer" (It gives network unreachable error).
However when I run it through root, it retrieves those same packages successfully.
yaourt also faces a similar kind of problem -
When I run it through sudo or as root, it is unable to retrieve packages which can be downloaded by pacman. But, when I run pacman to download those same packages, it is able to do so.
I am using gnome 3.8, and use radiotray ( It's for listening online radios ). When I run it via 'Alt-F2' or as a startup application, it's not able to connect to any radio station ( which means it's not connecting to the internet ). However, on running it via terminal, it connects to the internet successfully. Are these 2 problems related ? I'm facing the first one even without loading gnome, so it's not gnome's problem, i guess.
I can ping successfully through my administrator as well as root account, connect to the internet via browser, and ssh, git, bzr are also working fine.
What can I do to resolve this ?
Thanks
Last edited by parinporecha (2013-09-12 06:01:06)

parinporecha wrote:
To configure proxy, I added the line "export http_proxy=PROXY_LINK" to the bashrc files of user and root.
Regarding Arch 3.10, yes i meant the installation media from 2013.09.01 ( kernel 3.10 )
That's why root works, but not sudo. Sudo clears the environment. See man sudo and man sudoers.

Look up Key

Hi All,
I am having a issue one of the Look up keys while i am looking to populate a date key into my fact table using a day_dt = calender_date lookup join for lot of records i am getting gud results except for some of the records i am getting NULL value populated into my fact table but i a have day_dt in my source table for that column . i am thinking the problem might be i am getting a warning saying calender_date date look up does not contain a unique Key.
Can you guys what i have to do to populate my fact table with date key instead of null.
Thanks

You use the key lookup operator to do an outer join the sql code. For example,you have the customer code (in sales tables) and want to look for his name in another table (customer table). It's not necessary to add the customer table into the mapping, but the sales table must be on the mapping.
You drag the key lookup operator and select the customer code as the source column. In the next screen you have to choose the table you want to search. In this case you have to choose the customer table. In that table you should select a key that matches the customer code. You can use a PK or UK to have a validating succesfull. Also, you can use an attribute of customer table that is not a key, but in this case you will got a warning when validating the mapping.
After doing the match, the next screen let you specify an action to be taken if the customer code isn't founded in customer table. Then you can return null value for the customer name or specify a fixed text, like "Name Unknown".

BB Curve 8310 - Message -"Unable to look up the user info in database"

Have contacts with email address uploaded from older model. Receive emails ok...have also set up two addresses for myself, however when trying to either manually place the email address or select one from my contacts, I get the response
"Unable to look up the user info in database" when trying to send email
I have created a CSV file for my contacts to transfer to the Curve however I don't know where to go from there.

Unable to look up the user info in database - KB03414
SOLUTION HERE.
If your issue is resolved, put a checkmark in the green box that contains the resolution.
OR
If it was just/or also really helpful - Give it a Kudos.. Go on Mate.. Help the rest of the clueless blackberry user world find their answer too..
~Gday from Down Under~

Unable to read registry key for log4net configuration location

I am getting this error "Unable to read registry key for log4net configuration location."
Regards Ravin

Thanks for reply.
I m using log4net in Biztalk server 2010. I wrote code in my orchestration like
// Create the logger using the ProjectName property value
from the .btdfproj
logger = log4net.Ext.Serializable.SLogManager.GetLogger("MyProjectName",
log4net.helpers.CallersTypeName.Name);
// Configure the logger by referencing the registry key written
during the deployment process
logger.RegistryConfigurator();
// Set some properties in the PropertiesCollectionEx object
logProps.Set("InstanceId", MyOrchestration(Microsoft.XLANGs.BaseTypes.InstanceId));
// Write a debug level entry to Log4Net including the properties
object
logger.Debug(logProps, "Received top level request...");
After successfully Deploying solution. Im getting this error.
I think problem is with the " log4net 64bit".
Regards Ravin

Unable to look up bean

Hi,
My action class (on the webserver) is unable to look up the bean (on app server - Weblogic) msg is name not found.
However the same action class is able to look up the session bean on NT and not on unix, can anyone hlep as to why this hsould be so?
Regards

Probably there is something different about the configurations on the two systems (and not the fact they are running on different operating systems).

[SOLVED] Pacman is unable to look up keys?

Similar Messages

Maybe you are looking for