[Solved] pacstrap fails on invalid signature for glibc

I'm trying a fresh install of Arch, but while following the beginner's guide, I encounter an issue when running `pacstrap /mnt base base-devel`.
When it has downloaded all packages and it finishes checking package integrity, I keep getting this:
error: glibc: signature from "Allan McRae <..>" is invalid
I have already tried `pacman-key --init` and `pacman-key --populate archlinux`. But that doesn't solve the issue.
I have also tried a different mirror, but that too didn't solve the issue.
What am I doing wrong? And how can I solve this problem.
*EDIT* Solved, I found out that pacstrap stored the database on /mnt/var/, by removing it and redownloading the packages, it solved my issue.
Last edited by madjo (2012-09-25 10:18:28)

For future reference, you don't have to delete the whole cache, just the package that is corrupt. (in /mnt/var/cache/pacman/pkg/)

Similar Messages

  • Boot fail. Invalid signature

    Just turned my tv and box on and it says boot fail. Invalid signature. Can anyone suggest what I do?

    Switch it off and try it again. Do this a few times if this still persists then I'm afraid dead may have a dead box.
    Before phoning however try this :
    Factory Reset
    Switch off the Vision+ box at the mains socket
    Hold down the front panel OK and down arrow buttons
    Switch on the power to the Vision+ box
    Allow the box to start up (about 15 seconds)
    Release the OK and down arrow buttons
    The Vision+ box will then contact the servers to get a new copy of its firmware
    This will take around 30 minutes
    Life | 1967 Plus Radio | 1000 Classical Hits | Kafka's World
    Someone Solved Your Question?
    Please let other members know by clicking on ’Mark as Accepted Solution’
    Helpful Post?
    If a post has been helpful, say thanks by clicking the ratings star.

  • Report fails with " Invalid argument for database." error.

    Hi All,
    Several of my reports deployed on Crystal Reports Server 2008 server fails everyday with the following error.
    Error in File ~tmp121c5dc747685036.rpt: Invalid argument for database.
    The error is not consistent, if report A fails today, it is Report B the next day. When I reschedule the reports, they run just fine. They fail only when the daily schedules run at 2:00 AM in the morning. 100 + reports are run at this time and some of the reports that fail run many times with different parameters. Is this error due to scheduling reports many times or is it something else? Appreciate any help with this.
    Thanks
    Bin

    Hi,
    can you please check under <BOBJ installation directory>\BusinessObjects Enterprise 12.0\logging in the log files created by the crystal reports job server for additionaly error messages?
    Regards,
    Stratos
    PS: Do you run CRS 2008 V0 or V1?

  • Invalid signature for Itunes 10.5.1

    I see I'm not the only onw who can't download 10.5.1 version of iTunes due to the invalid signature.  I tried disabling my anti virus-- didn't work.  The last three updates I've had to completely remove iTunes and re install-- what a pain in the ***!  Come on iTunes,  is it too much too ask that you provide us w/ a valid signature?

    Ok so, now apparently, when I close out of itunes and re open it, the album artwork is there now.  Weird.

  • Invalid signature for perl-params-util [solved]

    Trying to upgrade perl-params-util failes with
    error: perl-params-util: signature from "Justin Davis (juster) <[email protected]>" is invalid
    I did a 'pacman-key --refresh-keys' and verified Just Davis' fingerprint. Can't see any error, might the package been broken? Anyone facing this issue?
    Thank you all reading this and dropping your 2¢
    Last edited by Henry78 (2012-08-07 05:29:31)

    you might try a pacman -Syy to force an update of the package lists.
    If that does not work, try telling pacman to clear your cache and, perhaps, try a different mirror.

  • [SOLVED] Pacstrap fails retrieving *any* file...

    Hi guys; I'm new here & kind of ashamed to open a thread because of the probably real stupid error I get.
    (Yes, I read the wiki and searched inside the forum&google.)
    I trying to install Arch in a Virtualbox VM; but I can't get past the initial pacstrap.
    All I get is:
    http://i.minus.com/igwm6vXdLZqPE.jpg
    http://i.minus.com/iGEBrUyZ3JoxH.jpg
    It always stops at about 88-90%.
    Network is working (at least pinging google etc.)
    I tried changing the mirror list (one of the mirrors is just 1km away and probably in the same university network as me... -.-)
    Manually downloading the databases via wget (found links somewhere here...) so the "warning: database file does not exist" error stopped coming, but that was the only thing that changed.
    I'm real perplexed about what's wrong. I'd be glad if you helped me^^
    edit: Sorry about the images.
    -- mod edit: read the Forum Etiquette and only post thumbnails http://wiki.archlinux.org/index.php/For … s_and_Code [jwr] --
    Last edited by Freierfall (2012-09-08 09:50:29)

    That was already the chosen option I've never changed anything there.
    Last night I also thought that may have to do something withe a misconfiguration of Virtualbox, so i downloaded the trial version of parallels, nothing changed.
    Err.. the only factor that hasn't changed is my network here. But I've never mentioned any problems with it in regular use; and It seems that syncing of the core-pacage has no such problems?

  • Oracle 11g RAC on Red Hat EL 4 x86_64 check failed for glibc-2.3.4-2.19

    Hi , I had a Red Hat EL 4 linux with FULL installion, so all the packages are installed auto.
    when I check the glibc with RPM, I got :
    rpm -q --queryformat "%{NAME}-%{VERSION}.%{RELEASE}.%{ARCH}\n" glibc
    glibc-2.3.4.2.41.i686
    glibc-2.3.4.2.41.x86_64
    It looks the 32 bit and 64 bit glibc are all installed.
    but when I run cluvfy to check RAC installion , I got :
    Check: Package existence for "glibc-2.3.4-2.19"
    Node Name Status Comment
    wcmrac2 missing failed
    wcmrac1 missing failed
    Result: Package existence check failed for "glibc-2.3.4-2.19". －－－－－32 bit check failed ？？
    Check: Package existence for "glibc-2.3.4-2.19"
    Node Name Status Comment
    wcmrac2 glibc-2.3.4-2.41 passed
    wcmrac1 glibc-2.3.4-2.41 passed
    Result: Package existence check passed for "glibc-2.3.4-2.19".－－－－64 bit check passed ？？
    why does this ?

    Did you check the compatibility of Oracle Database 11g with RedHat 4 in the compatibility matrix or the installation docs?

  • For Windows XP. trying to download 10.5.2, but download fails continuously with message saying "certificate has invalid signature"

    I have been trying to download itunes_10.5.2 to a Window XP environment, but on each occasion after each section of the download I get a fail message saying something like "certificate has invalid signature".

    Thanks for the reply kglad - much appreciated.
    I have already tried that option (along with downloading files) as it was one of the solutions mentioned on other threads, but that also failed.
    Any other ideas?

  • [SOLVED] Grub 2 gives Error: Invalid Signature

    Hello everyone.
    I am trying to dual boot Arch and Windows 7. I am boot into Arch with no problem but when I select Windows 7; I am greeted with the 'Error: Invalid Signature' and redirects back to the Grub 2 menu.
    I have googled and have tried many times, so I thought I would come to the endless supply of knowledge of the bbs.archlinux forums.
    I can boot into Windows when I have it as the first boot drive in the BIOS, so I Windows is fine. It's got to be one simple step I'm missing here.
    P.S. I really wasn't sure where to put this post.
    I'll go ahead and list some (hopefully) useful information:
    sudo fdisk -l
    Disk /dev/sdc: 500.1 GB, 500107862016 bytes, 976773168 sectors
    Units = sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 4096 bytes
    I/O size (minimum/optimal): 4096 bytes / 4096 bytes
    Disk identifier: 0x00000000
    Device Boot Start End Blocks Id System
    /dev/sdc1 * 63 1992059 995998+ 83 Linux
    Partition 1 does not start on physical sector boundary.
    /dev/sdc2 1992060 9992429 4000185 82 Linux swap / Solaris
    Partition 2 does not start on physical sector boundary.
    /dev/sdc3 9992430 976773167 483390369 83 Linux
    Partition 3 does not start on physical sector boundary.
    Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes, 1953525168 sectors
    Units = sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    I/O size (minimum/optimal): 512 bytes / 512 bytes
    Disk identifier: 0x0ca96061
    Device Boot Start End Blocks Id System
    /dev/sdb1 * 2048 1953521663 976759808 7 HPFS/NTFS/exFAT
    Disk /dev/sda: 60.0 GB, 60022480896 bytes, 117231408 sectors
    Units = sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    I/O size (minimum/optimal): 512 bytes / 512 bytes
    Disk identifier: 0x4df1d31e
    Device Boot Start End Blocks Id System
    /dev/sda1 2048 117227519 58612736 7 HPFS/NTFS/exFAT
    Where /dev/sda is Windows
               /dev/sdb is an extra disk that holds music and documents
               /dev/sdc is Arch
                       sdc1 is /boot
                       sdc2 is swap
                       sdc3 is root
    Also my BIOS are set up to boot the Arch disk, then Windows, and final the extra disk.
    /etc/grub.d/40_custom:
    #!/bin/sh
    exec tail -n +3 $0
    # This file provides an easy way to add custom menu entries. Simply type the
    # menu entries you want to add after this comment. Be careful not to change
    # the 'exec tail' line above.
    menuentry "Windows 7" {
    set root=(hd0,1)
    drivemap -s (hd0) (hd1)
    chainloader +1
    /boot/grub/grub.cfg
    # DO NOT EDIT THIS FILE
    # It is automatically generated by grub-mkconfig using templates
    # from /etc/grub.d and settings from /etc/default/grub
    ### BEGIN /etc/grub.d/00_header ###
    insmod part_gpt
    insmod part_msdos
    if [ -s $prefix/grubenv ]; then
    load_env
    fi
    set default="0"
    if [ x"${feature_menuentry_id}" = xy ]; then
    menuentry_id_option="--id"
    else
    menuentry_id_option=""
    fi
    export menuentry_id_option
    if [ "${prev_saved_entry}" ]; then
    set saved_entry="${prev_saved_entry}"
    save_env saved_entry
    set prev_saved_entry=
    save_env prev_saved_entry
    set boot_once=true
    fi
    function savedefault {
    if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
    fi
    function load_video {
    if [ x$feature_all_video_module = xy ]; then
    insmod all_video
    else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
    fi
    if [ x$feature_default_font_path = xy ] ; then
    font=unicode
    else
    insmod part_msdos
    insmod ext2
    set root='hd2,msdos3'
    if [ x$feature_platform_search_hint = xy ]; then
    search --no-floppy --fs-uuid --set=root --hint-bios=hd2,msdos3 --hint-efi=hd2,msdos3 --hint-baremetal=ahci2,msdos3 c15450d4-4fe6-4124-aa4e-a6419188845b
    else
    search --no-floppy --fs-uuid --set=root c15450d4-4fe6-4124-aa4e-a6419188845b
    fi
    font="/usr/share/grub/unicode.pf2"
    fi
    if loadfont $font ; then
    set gfxmode=auto
    load_video
    insmod gfxterm
    fi
    terminal_input console
    terminal_output gfxterm
    set timeout=5
    ### END /etc/grub.d/00_header ###
    ### BEGIN /etc/grub.d/10_linux ###
    menuentry 'Arch GNU/Linux, with Linux core repo kernel' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-core repo kernel-true-c15450d4-4fe6-4124-aa4e-a6419188845b' {
    load_video
    set gfxpayload=keep
    insmod gzio
    insmod part_msdos
    insmod ext2
    set root='hd2,msdos1'
    if [ x$feature_platform_search_hint = xy ]; then
    search --no-floppy --fs-uuid --set=root --hint-bios=hd2,msdos1 --hint-efi=hd2,msdos1 --hint-baremetal=ahci2,msdos1 4637508e-7f78-4f2d-9cd7-90868f1de62f
    else
    search --no-floppy --fs-uuid --set=root 4637508e-7f78-4f2d-9cd7-90868f1de62f
    fi
    echo 'Loading Linux core repo kernel ...'
    linux /vmlinuz-linux root=UUID=c15450d4-4fe6-4124-aa4e-a6419188845b ro quiet
    echo 'Loading initial ramdisk ...'
    initrd /initramfs-linux.img
    menuentry 'Arch GNU/Linux, with Linux core repo kernel (Fallback initramfs)' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-core repo kernel-fallback-c15450d4-4fe6-4124-aa4e-a6419188845b' {
    load_video
    set gfxpayload=keep
    insmod gzio
    insmod part_msdos
    insmod ext2
    set root='hd2,msdos1'
    if [ x$feature_platform_search_hint = xy ]; then
    search --no-floppy --fs-uuid --set=root --hint-bios=hd2,msdos1 --hint-efi=hd2,msdos1 --hint-baremetal=ahci2,msdos1 4637508e-7f78-4f2d-9cd7-90868f1de62f
    else
    search --no-floppy --fs-uuid --set=root 4637508e-7f78-4f2d-9cd7-90868f1de62f
    fi
    echo 'Loading Linux core repo kernel ...'
    linux /vmlinuz-linux root=UUID=c15450d4-4fe6-4124-aa4e-a6419188845b ro quiet
    echo 'Loading initial ramdisk ...'
    initrd /initramfs-linux-fallback.img
    ### END /etc/grub.d/10_linux ###
    ### BEGIN /etc/grub.d/20_linux_xen ###
    ### END /etc/grub.d/20_linux_xen ###
    ### BEGIN /etc/grub.d/20_memtest86+ ###
    ### END /etc/grub.d/20_memtest86+ ###
    ### BEGIN /etc/grub.d/30_os-prober ###
    ### END /etc/grub.d/30_os-prober ###
    ### BEGIN /etc/grub.d/40_custom ###
    # This file provides an easy way to add custom menu entries. Simply type the
    # menu entries you want to add after this comment. Be careful not to change
    # the 'exec tail' line above.
    menuentry "Windows 7" {
    set root=(hd0,1)
    drivemap -s (hd0) (hd1)
    chainloader +1
    ### END /etc/grub.d/40_custom ###
    ### BEGIN /etc/grub.d/41_custom ###
    if [ -f ${config_directory}/custom.cfg ]; then
    source ${config_directory}/custom.cfg
    elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
    source $prefix/custom.cfg;
    fi
    ### END /etc/grub.d/41_custom ###
    Thanks in Advance for anyone that is willing to help. Let me know if you need anymore information.
    I am going to keep on researching and trying.
    Last edited by pjk1939 (2012-12-02 23:22:35)

    Alright everyone I got it working. I will show what I did and mark as solved.
    For some reason, that I do not know the answer too, the Window's bootloader was on my extra harddrive /dev/sdb1 as opposed to /dev/sda1, where my Windows partion actually is. I'm not sure what I did to do that or if that is just is just how Windows works.
    my /etc/grub/40_custom:
    #!/bin/sh
    exec tail -n +3 $0
    # This file provides an easy way to add custom menu entries. Simply type the
    # menu entries you want to add after this comment. Be careful not to change
    # the 'exec tail' line above.
    menuentry "Windows 7" {
    insmod ntfs
    set root=(hd0,1)
    search --no-floppy --fs-uuid --set BE4CA71B4CA6CD89
    chainloader +1
    I added in the
    insmod ntfs
    and
    search --no-floppy --fs-uuid --set BE4CA71B4CA6CD89
    so that it would boot from the /dev/sdb1 drive.
    I found the UUID by running the command:
    sudo blkid

  • Hello, I was trying to upgrade my iTunes for windows 7 PC, but because of invalid signature error I removed iTunes as well as all apple related applications. While reinstalling it , When I click link to install iTunes it immediately says '' thank you

    Hello, I was trying to upgrade my iTunes for windows 7 PC, but because of invalid signature error I removed iTunes as well as all apple related applications. While reinstalling it , When I click link to install iTunes it immediately says '' thank you for downloading iTunes'' but I don't find it in my system.
    I have tried all suggested option to solve it but all in vain. Please help me to get rid of this problem

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
    Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
    tt2

  • Asu invalid signature, Itunes failed secure connection

    ok this is my computers info
    Manufacturer: Gigabyte Technology Co., Ltd.
    Processor: Intel(R) Core(TM)2 Duo CPU E8200 @ 2.66GHz (2 CPUs), ~2.7GHz
    Memory: 2046MB RAM
    Hard Drive: 750 GB
    Video Card: 2 x NVIDIA GeForce 8800 GT SLI
    Monitor: BenQ FP222W (Digital)
    Sound Card: onboard
    Speakers (Realtek High Definition Audio)
    Speakers/Headphones:
    Keyboard: USB Root Hub
    Mouse: USB Root Hub
    Mouse Surface: teh pwnag3 table
    Operating System: Windows Vista™ Ultimate (6.0, Build 6001) Service Pack 1 (6001.vistasp1_gdr.080425-1930)
    Motherboard: gigabyte S-Series N650SLI-DS4L
    First of all i was having trouble with Apple software update, every time i try to update, i get a invalid signature error...
    the update i am trying to download is the asu 2.1.1 which is 1.99mb and my current version of asu is version 2.1.0.110
    also when i try buy things off itunes i keep getting an error message saying could not get a secure connection to itunes.
    it would be great help if there was an actual solution to these problems

    umm apple support helper fails to actually read my email properly as you can see down below, i hope you people are better than that and will actually read what i have written lol correctly ok??? lol
    it starts from the bottom lol
    Subject: Del's itunes, and umm apple software update problems lol
    Subject: Re: Connection; Follow-up: 54591743
    ahh none of that info actually helped if you haven't noticed i have a
    problem
    with
    iTunes for Windows could not establish a secure connection to the
    iTunes Store.
    also apple software updater receives error message "apple software
    updater has invalid signature, and has been deleted"
    everything you sent me was about installing itunes..... its already
    installed
    NONE of that info you sent me had any use for me.
    also i noticed i get this message aswell
    Error "check time and date" but its all fine its correct
    Subject: Re: Connection; Follow-up: 54591743
    Good afternoon from California. I hope my email finds you well. I
    understand you're having difficulty installing the latest updates to
    your Apple software. I'll do everything I can to help you get iTunes up
    and running.
    If you are having trouble installing iTunes for Windows, iPod, or
    QuickTime software on your computer, please try the steps outlined in
    this installation troubleshooting article:
    http://www.info.apple.com/kbnum/n93976
    Please make sure you're attempting to install the latest version of
    iTunes. You can download the latest version of iTunes free of charge
    from the Apple website:
    http://www.apple.com/itunes/download/
    Windows XP with Service Pack 2 users should also read this important
    article about changes to Internet Explorer download behavior:
    http://www.info.apple.com/kbnum/n93975.
    I hope the above information is helpful to you Nicholas. If you are
    still experiencing a problem with this, you may wish to call our
    AppleCare technical support team. A representative will be able to tell
    you about Apple's complimentary and fee-based support options and can
    help you determine which option might be most helpful in this case. To
    find the appropriate phone number, please visit:
    http://www.apple.com/support/contact/phone_contacts.html
    Thank you for your patience regarding this matter and have a great day.
    Sincerely
    Elaine
    iTunes Store Customer Support
    Please Note: I work Tues - Sat 10am - 7pm PST
    Thank you for allowing me the opportunity to assist you.
    Support Subject : Connection
    Sub Issue : This same connection has worked before
    Platform : Windows Vista
    Country : Australia
    Error Message : other
    Comments: iTunes for Windows could not establish a secure connection to
    the iTunes Store.
    also apple software updater receives error message "asu has invalid
    signature, and has been deleted"
    this also might have a bit more info on my problem
    describes my problem a bit more in detail >>
    http://discussions.apple.com/thread.jspa?threadID=1689719&stqc=true
    things i've tried:
    uninstalling and re-installing both itunes and quicktime
    ran the diagnostics with itunes "secure link to Itunes store failed"
    then tried http://support.apple.com/kb/TS1470
    everything was already done i didn't have to change any of that.
    i tried this aswell:
    (If you do get the "invalid signature" message, to upgrade to a higher
    version of ASU that does seem to work properly, a QuickTime uninstall
    followed by a standalone QT reinstall, or an iTunes uninstall/reinstall
    should get you back a better version of ASU. My local copy of an iTunes
    7.6.2.9 installer was one of the versions with an ASU 2.0.2.92 in the
    bundle ... but on the laptop that's quite comfortable about upgrading
    itself to 2.1.)
    from http://discussions.apple.com/thread.jspa?messageID=7989138
    i believe the problems might be related... since well i think apple
    software updater cannot complete the updates therefor makes itunes
    software maybe older? therefore not being able to get a secure link but
    i cannot find any information on apple software updater
    Message was edited by: Del-owns

  • Trying to load a secure website, firefox says "Secure Connection Failed: Peer's certificate has an invalid signature."

    I need to get on this website, which only allows Firefox and Safari for Mac OSX, but since I upgraded to the latest Firefox update, this is the message I get:
    Secure Connection Failed
    An error occurred during a connection to teleserve.dlt.ri.gov.
    Peer's certificate has an invalid signature.
    (Error code: sec_error_bad_signature)
    Help!

    The site doesn't seem to be sending the correct intermediate certificate.
    You can install this VeriSign intermediate certificate that works for me.
    *https://knowledge.verisign.com/support/ssl-certificates-support/index?page=content&id=AR1514

  • Verification Failed. The certificate for this server is invalid

    I am trying to backup my iPad to iCloud.  I get:
    Verification Failed.  The certificate for this server is invalid. You might be connecting to a server that is pretending to be "setup.icloud.com" which could put your confidential information at risk.
    I am logged onto the wifi at work and I can surf the Internet so the connection is OK.
    How do I begin to debug this issue?

    Hey everyone,
    I had this issue for few months already! I have a @me.com mail address, theoretically should be compatible with iCloud, just for some reason, it's not working!!
    The mail all work fine on my macbook and iPhone, just the ipad kept showing the error message, the "verification failed".
    The internet is wi-fi and it all working fine.
    Now here is the solution.
    Make sure you got internet connected fine.
    Go Setting --> Mail, Contacts, Calendars --> Add Account --> Other
    --> Add Mail Address -->
    in the description, it will auto showing "Me", don't change it!
    Go "Next" -->
    in the Incoming Mail Server
    Host Name --> Type "imap.mail.me.com"
    Then your user name and password
    in the Outgoing Mail Server
    Host Name --> Type "smtp.mail.me.com"
    Then your user name and password
    Then next and save it.
    This should work, it works for me,
    Hope this helps!!

  • SSRS Error : Query execution failed for dataset 'dataSet'. (rsErrorExecutingCommand) Semantic query execution failed. Invalid object name 'RPT.*********'. (rsSemanticQueryEngineError)

    I am new to SSRS and I am trying to migrate reports from 2008 to 2012. As I have so many reports to migrate, I simply got the back up of ReportServer,
    ReportServerTempDB, and Encryption Key and restored them to test environment. I made necessary configuration from RS configuration tool. I am able to see the reports now when I browse //hostname/reports. But when I open any particular report I am getting some
    error.
    · An error has occurred during report processing.
    (rsProcessingAborted)
    Query execution       failed for dataset 'dataSet'.
          (rsErrorExecutingCommand
    Semantic query        execution failed. Invalid object name
           'RPT. ******'. (rsSemanticQueryEngineError)
    ****** - I am assuming this is a custom data class.
    Does anyone have insight on this? or any better way that I can migrate the reports to new server with less efforts.
    I don’t have the reports solution file to deploy the reports, so I have followed backup and restore process.

    Hi Kishore237,
    According to your description, you migrated some reports from Reporting Services (SSRS) 2008 to 2012. Now you get error when accessing the reports on SSRS 2012. Right?
    In this scenario, did you modify the report data source in database after migration? You can try to open the report in Report Builder or Report designer and check the report dataset. If you can preview the report in Report builder or Report designer,
    please try to redeploy the report to Report Server. If it is still not working, please try to restore the database from backup. And for migrating reports, please follow the "Content-Only Migration" in the link below:
    http://msdn.microsoft.com/en-us/library/ms143724(v=sql.110).aspx
    If you have any question, please feel free to ask.
    Best Regards,
    Simon Hou

  • Firefox Displays "Peer's certificate has an invalid signature." SubCA shows "Could not trust this certificate for unknown reasons"

    Using a 2-tier on-premise PKI. Offline Root CA (Standalone Windows 2008 R2 Enterprise) and online SubCA for issuing certificates (Domain-Joined Issuing CA)
    ROOTCA certificate installed in the store and showing trusted (Uses a SHA2 signature and PKCS #1 SHA-256 With RSA Encryption algorithm)
    ISSUINGCA certificate installed in the store and showing "Could not trust for unknown reasons" also has SHA2 signature with RSASSA-PSS algorithm
    Issued certificate is for a Lync Front-End Web Server and when attempts are made to load the secure web connection. I receive the error "Peer's certificate has an invalid signature"
    I've completely de-installed and re-installed Firefox. Removed and re-added the ROOT and SUBCA certs. Note: No issues when using same certs in Internet Explorer 8, 9 or 10 on the same system. Lync client also using same certificates, no issues. Only when accessing the Lync Web Services from Firefox.
    Question: Does Firefox NSS Internal PCKS#11 Module support RSASSA-PSS SHA-256 with different hashes? How can I troubleshoot this further?

    HI khetheri,
    In order to better test the certificate may we request the certificate without the private keys? I have some backup from the security team if this is possible.
    There is a temporary work around as well but I don't recommend turning on all certificates to make sure it is not a compatibility error(ish)
    It is possible to check if it is being detected as a bad certificate in Firefox itself to eliminate compatibility issues.
    # In the [[Location bar autocomplete|Location bar]], type '''about:config''' and press '''Enter'''. The about:config "''This might void your warranty!''" warning page may appear.
    # Click '''I'll be careful, I promise!''', to continue to the about:config page.
    # Search for '''browser.xul.error_pages.expert_bad_cert ''' and set it to true to try the certificate normally.
    Looking forward to your reply!

Maybe you are looking for