[SOLVED]php, upload file more then 980mb

Hi!
I have a problem: I want to upload file about 2G. file uploads in /tmp while its size not more then ~980mb, after that he deleted and ~1.2G go to /dev/null
httpd was restart after I changed in php.ini
post_max_size = 30G
upload_max_filesize = 30G
error UPLOAD_ERR_CANT_WRITE: "Failed to write file to disk";
files less 900mb upload normally
Last edited by x1site (2014-07-22 09:53:56)

slithery wrote:
Do you only have 2G of RAM by any chance?
The /tmp filesystem is mounted in RAM and limited to half the amount of total memory. If this is your issue then either change the download location to somewhere else or adjust your tmpfs settings.
I have changed
upload_tmp_dir = /srv/temp
open_basedir = /srv/http/:/home/:/tmp/:/usr/share/pear/:/usr/share/webapps/:/srv/temp
it helped me. thx
Last edited by x1site (2014-07-22 09:53:44)

Similar Messages

How to show an HTML file (more then 1MB size) in JEditorPane

I an trying to show an HTML file (more then 1 MB size ) in JEditorPane
but getiing OutOfMemory error.
if i try the same for size less then 1 MB(i tried till 850KB) then it will work fine.
I am using setPage() method of JEditorPane.
please provide solution .

I meet the same question, and even worse.
I created a html file with frameset, when i point to the link which is an html file larger than 500kb . it fails. and some error "infinite loop in formatting" is thrown
in javax. swing.text.FlowView. I read the code of this class, and can't tell what's the error of my application.
Can someone help and give some answer?

Can't open .msg files more then once, saved or as an attachment to an email

we use :
microsoft xp & office/outlook 2003
can't open .msg files more then once, saved or as an attachment to an email
If we save an email as a outlook.msg file , we can only open it once, close it,
when trying to open it again it gives an error that it is not possible due to a scurity issue or it is already open.
After closing outlook and starting it again, we can open it once again.
Same when clicking an .msg that is attached to an email, but here we can switch to another email, go back to the one and open it again.
We have installed all updates for both xp and office 2003 also internet explorer 8.0 to test if that would work, normally we have ie7.0.

Hi,
1． What is the detail error information, please try to reproduce the issue and then post the detail error information here.
2． Did you save the msg file locally or on a network drive?
3． Please try to check security on the msg file and also check the drive NTFS permission.
4． Copy over the email messages from the affected user machine to a different machine and check if the issue persist.
5． Test if the issue persist after saving a new email on Mailbox to local drives.
6． Copy over the affected email messages from local drive to a PST file and check if these emails can be opened fine.
1)    Create a new PST file .
2)    Added to user’s Outlook profiles.
3)    Launch Outlook .
4)    Highlight a folder under this PST.
5)    Drag and drop or copy/paste the emails from local drive to Folder highlighted under the PST files.
Besides, please try to remove all the add-ins like Entrust and then test the issue again.
1.     Remove add-ins
1)    Uncheck all Third-Party Add-ins selected in Outlook , found under Tool\Options\Other\Add-ins managers.
2)    Export the registry hive below for backup.
  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office\Outlook \Addins
  HKEY_CURRENT_USER\SOFTWARE\Microsoft\Office\Outlook \Addins
3)    Delete the registry entries under the above path for all Third-Party Add-ins.
4)    Close , Open Outlook and attempt to open email message on local drives.
2.     Temporarily stop all third-party application running following the steps
below.
1)    Run MSCONFIG
2)    Go to Services Tab\Select Hide all Microsoft Services check box.
3)    Click Disable All.
4)    Restart the Machine Test if the issue persist.
5)    To revert back the above setting Run MSCONFIG, Go to General Tab , Select Normal
Startup and restarted the machine.
Regards,
Xiu
1 Translated from dutch as good as i know :
"Can't open : c:\test.msg, it might not exist, do you have the required permission to open the file or is it open in another application. Click
with the right mousebutton on the map click properties to view/check the rights for that map."
2 tried both, the network and locally, i have the rights to save it in the map and open it once, so thats not the problem, iseems that outlook locks the file after it is openen once.
3 security and ntfs permissions are ok, see 2
4 tried it from different pc's networks maps etc.
5 done.
6 in a pst file the msg can be openen ore than once, but thats not the problem, tried and this works, but i need to save an email as an .msg file.
7 addins removed and doen all of that part, didn't help.
We also have tried:
-Installing all updates and ie8
-going back to xp sp2 (fresh install of xp)
Only thing that did work was an msg file attached to an email, we couldn't open that more then once,
but after checking "Use exchange modus with cache" at the account properties we could open that more than once.
Now we need to be able to open the email's saved as .msg more then 1 time.

[solved] vsftpd: Uploaded files are with permissions -rw-------.?

Hello,
I have a problem with the ftp server(vsftpd).The new files are saved with permissions 600 (rw ----). So apache server can't show them. Ftp access is configured with my local user and this home is in /srv/http.
The trouble is the user config access...
Last edited by felipe (2013-07-29 16:38:14)

solved:
acording to
Q) Help! Uploaded files are appearing with permissions -rw-------.
A1) Depending on if this is an upload by a local user or an anonymous user,
use "local_umask" or "anon_umask" to change this. For example, use
"anon_umask=022" to give anonymously uploaded files permissions
-rw-r--r--. Note that the "0" before the "22" is important.
A2) Also see the vsftpd.conf.5 man page for the new "file_open_mode"
parameter.
more info :
https://security.appspot.com/vsftpd/FAQ.txt

Unable to upload file more than 2 MB

Hi I am trying to uplaod a file to Oracle DB using struts . The file is being stored as a blob datatype . When the file-size is more than 2 MB the file does not get uplaoded . The property mapped to the form attribute returns null . IBelow is part of the jsp code
<html:form styleId="sponsorBio" action='<%=response.encodeURL("/sponsorBioUpdate.do")%>' method="POST" enctype="multipart/form-data" >
<TR>
<TD valign="top" class="txt_12_dblue">Attach Biography Document</TD>
<TD valign="top" class="txt_12_dblue">:</TD>
<TD><html:file name="biographyForm" property="biography.formFile" /></TD>
</TR>
The property biography.formFile is coming as null in the backend
Can anyone pls help .

2 megabytes or 2 gigabytes? I could see a limitation with the former (as this is the size of the absolute value of the max of a signed int). But 2mb seems more like some configuration option is fouling your upload. What and how are you using to parse the multi-part?
- Saish

Unable to upload file more than 1 MB

Hi,
I am using the iPlanet web server for my web application.
I am not able to upload a file of size greater than 1MB.
Are there any settings on the iplanet server made that limit the file size for the uploading?
Regards,
Manasi

Hi Mansi,
It is not because of App server. It is due to the program/logic that you are using. There is one very good file upload application is available in open source where you can upload the attachments of 10mb within very less time.
Download the jar from the following URL
http://servlets.com/cos/
Regards,
Sandeep

My uploads waits more then 2 months to be approved

I uploaded some content 2 months ago and still not approved http://www.adobe.com/cfusion/exchange/index.cfm?event=myUploads

Try posting your product if its CS6 compatible to the new Adobe Exchnage, we have dedicated product approval staff.
https://www.adobeexchange.com/producer
It's free to post 10 products including 2 paid products.
Jonathan Ferman | Product Manager

How to send more then one image ore data file

Here
http://www.kfhgd.internetcafe-kaufbeuren.de/upload.php
I use an already
made script. I want to allow users to send more then one
image or data file
to the server. All my efforts for reaching the author had
been
unsuccessfully.
Could someone help me to change the script in my way?
Ciao, servus und salut
Janis

.oO(Janis)
>Here
http://www.kfhgd.internetcafe-kaufbeuren.de/upload.php
I use an already
>made script. I want to allow users to send more then one
image or data file
>to the server. All my efforts for reaching the author had
been
>unsuccessfully.
>
>Could someone help me to change the script in my way?
You need multiple file upload form controls in your HTML and
the PHP
script has to loop through the array that holds the
informations about
all received files.
The script might also need some additional security checks.
Currently it
seems to be possible to upload any arbitrary files, even
other scripts.
With some more tweaking the server might be tricked into
executing them,
which would be a huge security hole.
The receiving script has to check the actual file content,
not just the
file extension or content type, which can both be faked.
Where did you get that script from?
Micha

PHP Upload script for ZIP/SIT files

Hi,
I'm trying to locate a decent script that would allow clients
to upload files to a Web site that I am working on. I found a basic
one that works at www.w3schools.com/PHP/php_file_upload.asp.
However, it lack the capabilities to upload zip and sit files.
Could I modify the existing script that I just mentioned?
Unfortunately, I am not very PHP saavy. I have been Googling for
such a script but have not found one yet. I hope some one could
recommend a decent script. Thanks.

.oO(Mark A. Boyd)
>Carlton Chin posted in macromedia.dreamweaver.appdev:
>
>> I'm trying to locate a decent script that would
allow clients to
>> upload files to a Web site that I am working on. I
found a basic
>> one that works at
www.w3schools.com/PHP/php_file_upload.asp.
>> However, it lack the capabilities to upload zip and
sit files.
>> Could I modify the existing script that I just
mentioned?
>
>The ticket is where the script is checking
$_FILES["file"]["type"].
>See
http://www.w3schools.com/media/media_mimeref.asp
>
>If you only want to allow zip/sit, try changing this:
>
><?php
>if ((($_FILES["file"]["type"] == "image/gif")
>|| ($_FILES["file"]["type"] == "image/jpeg")
>|| ($_FILES["file"]["type"] == "image/pjpeg"))
>&& ($_FILES["file"]["size"] < 20000))
Be careful. These informations can be faked or might not be
available at
all. I can easily upload a PHP script as "image/jpeg". If the
file ends
up in a public directory within the document root, I can
execute it and
then have a look at the entire server ...
Relying on the content type or file extension is a huge
security hole!
I'm quite surprised that W3Schools publishes such an insecure
script.
To make sure that an uploaded file is really of the type you
expect, you
must look at its content! For images you can use
getimagesize(), which
will also return the type if it's a valid image. For other
types you
have to use other libs or external tools. On a *nix machine
you could
execute the shell command 'file' for example, which
recognizes quite a
lot of different file types.
Micha

Error Uploading Files - One or more files could not be uploaded

Hi, I used Adobe SendNow without any problems for years. Since the migration to Adobe Acrobat, I don't think I have once managed to successfully send any files. Each time I get the message: Error Uploading Files - One or more files could not be uploaded. Please try again. If someone could help that would be great or else I will need to subscribe to alternative file sharing service that actually uploads files. I previously filed a Case Request looking for assistance, and within 2 seconds I received an automated response: "With this response, we believe your issue is resolved and have therefore closed your case 0186251803" !!!

Hi,
Those sizes (and numbers and numbers of files) shouldn't present any problem, but obviously something is amiss.
If you wouldn't mind trying to upload via the Files tab, and then sending from there, that would help us to diagnose. To upload your files, simply sign in and click on the Files tab. You might want to make a folder to hold the files you are going to send. To do this, click on the folder with the + sign. Then open that folder and click on the cloud with the arrow.
(The other way to upload files is to simply drag and drop them.) If you have trouble uploading many files at once (you shouldn't!), try one at a time. Again, I am interested to know what method, if any, works for you.
Now that you have your files uploaded (at least, I hope you've been able to do it successfully!), click on the Send tab and follow the instructions for selecting Acrobat.com Files instead of My Computer.
You should now see the folder you just created. Open it up, and select the files you want to send.
If you have any trouble with this method, give a holler. Though since it's getting late here on the east coast, I might not be able to respond until the morning.

How to make changes in more then one file

Hi All,
M new and dont have deep idea about dreamwheaver.Actually i want to make changes in more then one file at the same time, how to do this. Is there any option available there. ?

If you you build your new site with SSIs (server-side includes), changes to include files will populate to all pages on the remote server. This is a huge time saver for maintaining common page elements on large sites.
Example code might look like this:
<body>
header goes here

<p>some text</p>
menu goes here

<p>some text</p>
footer goes here

</body>
</html>
Pages with includes on them need to be saved as .shtm or .shtml. If you use server-side scripts on your site, save as .asp or .php to match your script type.
http://www.smartwebby.com/web_site_design/server_side_includes.asp
Nancy O.

How do I select more then one channel to view in tdms file viewer graph panel

I have a TDMS file that I can view with the labview 2013 TDMS file viewer and I can select one signal out of 15 signals to view on the graph panel. however I would like be able to look at 2 or 3 signals
on the same graph but can't seem to be able to select more then one signal at a time. Is there a way to select more then one to view?

I've modified the TDMS viewer in the past to allow selecting multple channels. It's a little bit of a pain because the tree control in the viewer only allows you to select one item. You have to edit the tree to allow multiple items. Now your selection is an array instead of a scalar. This means the rest of the code has to be updated, and the references to the tree in subVIs need to be updated. Not impossible but it takes some time. Alternativly open it in Excel with the free add-in then you can select the two columns you want and insert a graph. Not as simple for the user but using Excel, which users should be familiar with might mean users need less training on data files.
Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.

After choosing a jpg for upload, the "Upload File" button on the organization's receiving site of does not respond. The second problem: it's impossible to highlight more that one file at a time.

Clicking the first file, holding down shift and clicking the last file doesn't work. I've tried all manner of command, control, shift combos without success. This one-at-a-time attachment problem also happens in web mail. Are these two issues related? Thanks for non-techie solutions for both issues. I have Safari 5.0.6 (5533.22.3) and Leopard.

Thanks for your response. I do have javascript turned on (not java). To answer your question,
I was trying to upload 3 jpgs to the submissions page of a visual arts website. I could only highlight one jpg at a time in the "Choose File" option, and then the "Upload File" button of the submissions page would not respond.
It's an ongoing problem with this site (I'm the only one with this issue and there are a lot of submissions). I have to send the images as email attachements to the administrator of the site. When doing this via webmail, I still the one attachment at a time problem, but the images get to the administrator. Thanks for helping.

I like to edit single letter in the pdf file having more then 1000 page, Example "T" in place of "V" in all the 1000 pages in pdf file. Please let me know

I like to edit single letter in the pdf file having more then 1000 page, Example "T" in place of "V" in all the 1000 pages in pdf file. Please let me know !

In a PDF you can´t change single letter.
You can only try to convert the PDF document into a Word document.
Now you can search and replace a letter.

Mail if no file available for more then 24 hours

Hi All,
I have one File to RFC scenario on PI7.1.
But now I have requirement that, I want to send error mail if file is not available for more then 1 day.
Can it be done in any SAP-PI standard way?
Or I need to write a small ABAP code on table SXMSPMAST to check if scenario runs in last 24 hour or not & then send alert mails?
Regards

Hi Rohan,
You need an ABAP code. There should be a table where you store all the file name PI receives and processes and the time and date when they have been received. The ABAP code will continuously check contents of the table and find out difference between current server time and date with the last entry in the table. If the difference is more than 24 hours then it will trigger emails to a fixed address or that may be obtained from a different table.
regards
Anupam

[SOLVED]php, upload file more then 980mb

Similar Messages

Maybe you are looking for