[SOLVED]ping and incoming connections not working

Problem: eg.
$ ping google.com
PING google.com (209.85.148.99) 56(84) bytes of data.
no answer so i press ctrl+c, i get:
^C
--- google.com ping statistics ---
56 packets transmitted, 0 received, 100% packet loss, time 54999ms
i can't use any torrent client because it accepts connections only then i start client(tested with deluge and transmission). eg. i start deluge->torrent start upload->later it won't start upload, but it sends to server info, server get that info(i tested in situation there i'm the only seeder and there is only one leecher which is under my control)
thoughts about that: i searched for solution for a long time, i very doubt that is a software issue, i think it's hardware problem(and about hardware i know nothing). why i think so:
possible cause of problem:
1. kernel upgrade to 3.0=with ubuntu live cd same problems, so it can't be it
2. i deleted windows xp, windows writes something to network card or bios?
3. hardware problem
before problems started i not did something big, so problem could cause only these 3 items.
i don't have firewall, there was one but for testing purposes i deleted it.
network card Realtek RTL-8169 Gigabit Ethernet, driver is latest(but tested and older version)
i tested with 2 different ISP's. one connected over lan and another just my phone connected as modem over usb cable. in both cases ping not work and all other network services works ok, i can browse, ftp works, i can download torrent(if torrent download starts with program start, not later), skype works, internet radio works, etc.
question: what to do, to make torrents work as they worked earlier? i have this problem about few weaks, in past 3 years i don't have such problems.
Last edited by gymka (2011-08-29 14:04:29)

I(i mean browser) can reach everything and everythere, but "ping" can't reach sites. Tried ping sites in my country, same result. i get answer from ping only then i ping these sites:
127.0.0.1
and
84.55.46.19(my ISP site for clients)
i can't even ping 192.168.0.1(it's router, so how can i browse if i can't reach router?)
and i can't ping 84.55.46.27(it's my ISP site for public)
# tcptraceroute archlinux.org
Selected device eth0, address 192.168.15.10, port 42318 for outgoing packets
Tracing the path to archlinux.org (66.211.214.131) on TCP port 80 (http), 30 hops max
1 192.168.15.1 0.940 ms 0.596 ms 0.553 ms
2 84.55.40.129.ip.greitas.lt (84.55.40.129) 3.047 ms 2.047 ms 2.649 ms
3 10.10.20.20 5.741 ms 5.935 ms 5.010 ms
4 * * *
^C
Same problems with different ISP so it's not my ISP problem.
Another thing:
# netstat -lnp|grep deluge
unix 2 [ ACC ] STREAM LISTENING 344527 1560/python2 /home/gymka/.config/deluge/ipc/deluge-gtk
as i understand 344527 is port on which app listens, but in application shows that it listens on 51128, then i configured to use only 51128 and restarted deluge
# netstat -lnp|grep deluge
unix 2 [ ACC ] STREAM LISTENING 522255 1641/python2 /home/gymka/.config/deluge/ipc/deluge-gtk[/deluge]
transmission atleast shows that port 57781(don't know if it listen it)
# netstat -lnp|grep transmission
tcp 0 0 0.0.0.0:57781 0.0.0.0:* LISTEN 1833/transmission-g
tcp 0 0 :::57781 :::* LISTEN 1833/transmission-g
udp 0 0 239.192.152.143:6771 0.0.0.0:* 1833/transmission-g
udp 0 0 0.0.0.0:57781 0.0.0.0:* 1833/transmission-g
unix 2 [ ACC ] STREAM LISTENING 709406 1833/transmission-g /tmp/at-spi2/socket-1833-1804289383
Last edited by gymka (2011-08-28 06:20:12)

Similar Messages

  • [Solved] Arch and virtual networking, not working as planned.

    Running pfSense trough virtualbox, running virtual machines behind it.
    What setup do I need, to get wireless LAN solely to pfSense. Currently I use the bridged setup in virtualbox as the WAN side. LAN is a host only adapter vboxnet0, all other VM's connect through that virtual adapter.
    I would like to use a second host only adapter on a different subnet, but, once I create the adapter vboxnet1 and add it as second LAN card OPT1 to pfSense, internet stops working on the first LAN, though I can still ping google from the pfSense box.
    How do I get Arch to not use the wireless connection but only the second host only adapter.
    At the moment I use NetworkManager for the network.
    Current setup (working):
    Router –                                         192.168.1.1 
    Arch bare hardware, main OS – 192.168.1.9   (wireless)
    pfSense WAN -                             192.168.1.12 ( through wireless)
    pfSense LAN  -                              10.10.2.1
    host only adapter vboxnet0 -        10.10.2.3
    I would like to add (not working):
    pfSense OPT1 -                            10.10.10.1
    host only adapter vboxnet1 -        10.10.10.3
    But this fails for unknown reasons.
    What do I miss, or should I do different, thanks in advance, Mark
    Last edited by qinohe (2015-01-30 12:39:32)

    All is working well. I extended to four virtual adapters, one for the Arch host, and a wireless AP connected to eth0, bridged to pfSense. All applications on the host are finding the pfSense squid proxy, I have libproxy installed. Set the default gateway on the host to be the proxy of pfSense.
    Now I can use my laptop to connect to insecure networks while not belonging to it, and host for friends at the same time, very nice

  • [SOLVED] Netcfg and Wireless connections stopped working

    I've been using Netcfg for a while now on my laptop and I've had no problems connecting to the internet until last week. Since the last pacman update I did (around Wednesday I believe) my laptop has not been able to connect to the internet again. It doesn't recognize my wireless interface even though it did before, and netcfg gives me a strange output when I try to connect to my network and tells me the network is not available. I've gone through the steps in the wiki about installing wireless drivers and I've redone that but it still does not work.
    Here is what Netcfg gives me when I try to connect:
    :: LosPin up [BUSY]
    nl80211: 'nl80211' generic netlink not found
    ioctl[SIOCSIWMODE]: Operation not supported
    ioctl[SIOCGIWRANGE]: Operation not supported
    ioctl[SIOCGIWMODE]: Operation not supported
    ioctl[SIOCSIWAP]: Operation not supported
    ioctl[SIOCSIWENCODEEXT]: Operation not supported
    ioctl[SIOCSIWENCODE]: Operation not supported
    ioctl[SIOCSIWENCODEEXT]: Operation not supported
    ioctl[SIOCSIWENCODE]: Operation not supported
    ioctl[SIOCSIWENCODEEXT]: Operation not supported
    ioctl[SIOCSIWENCODE]: Operation not supported
    ioctl[SIOCSIWENCODEEXT]: Operation not supported
    ioctl[SIOCSIWENCODE]: Operation not supported
    > Wireless network "LosPin" not present.
    [FAIL]
    I know the network is present because when I boot into Windows on this same laptop it connects without any issues. I think it is a driver issue but re-installing the driver has not helped so I'm wondering if anyone can help me out.
    This is my netcfg profile if needed:
    CONNECTION="wireless"
    ESSID="LosPin"
    INTERFACE="eth0"
    SCAN="yes"
    TIMEOUT="10"
    SECURITY="wpa"
    KEY=
    WPA_Driver='wext'
    IP='static'
    ADDR='10.0.0.80'
    GATEWAY='10.0.0.1'
    DNS='10.0.0.1'
    The reason that the interface is set to eth0 is because it is the only interface for which netcfg tries to connect to the network. If I use wlan0 as the interface it tells me it doesn't exist, and before I had the problem, the interface I used was eth1, which now netcfg says does not exist either.
    Any help is greatly appreciated.
    Last edited by Hoest (2011-11-17 23:32:29)

    I've checked and it's definitely not an rfkill issue. I've tried to connect to the network with two different netcfg profiles, one using wpa_supplicant and the other with configsection. Both give me the same "WPA Authentication/Association Failed" error. There was one try with the wpa_supplicant profile that gave the a "network not found" error but afterwards it went back to the original error. Here are my profiles if needed.
    configsection profile:
    CONNECTION='wireless'
    INTERFACE='eth0'
    SECURITY='wpa-configsection'
    ESSID='LosPin'
    IP='dhcp'
    TIMEOUT='130'
    CONFIGSECTION='
    ssid="LosPin"
    key_mgmt=WPA-PSK
    psk="..."'
    wpa_supplicant profile:
    CONNECTION="wireless"
    INTERFACE="eth0"
    TIMEOUT="60"
    WPA_Driver='wext'
    IP='dhcp'
    SECURITY='wpa-config'
    WPA_CONF='/etc/wpa_supplicant.conf'
    And this is my wpa_supplicant.conf:
    ctrl_interface=DIR=/run/wpa_supplicant GROUP=wheel
    network={
    ssid="LosPin"
    proto=RSN
    key_mgmt=WPA-PSK
    pairwise=CCMP TKIP
    group=CCMP TKIP
    #psk="..."
    psk=84e710904340353a5217eb63ced7e8f4beb38bf6317bf4648e8b4557c7f3442d
    Again, thank you all for all your help.

  • Ping and Tracert does not work

    Basically I can cruise the internet just fine but i ahve been having a ton of trouble staying connected to an online game that I normally play.  When i try to ping or tracert the game server I get times outs right after I hit my Linksys WRT54G router, and when i try pinging or tracert from the Linksys router I get time outs as well.  At thsi point i thought it might have been the game servers but then discovered I couldn't ping, or tracert to either msn, microsoft or even google.
    How come or what can i check?

    Sorry i should have been more clear, the internet works fine and I can cruise websites no problem.  Lately I have been having trouble staying connected to EVE Online and was trying to do a Tracert or even Ping on the Gaming server.
    If I try a ping from my pc which is wired into the router I get Request Timed out, if I try a Tracert it hits the router at 192.168.1.1 but anything after the router times out.
    If I logon to the web UI for the router and try the Tracert and Ping utilities built in to the router (WRT54G) I get time outs as well for both Ping and Tracert.  I have tried various other sites as well as the game server that I am having trouble with and each time it comes back as Request Time Out.
    I am wondering why?

  • Satellite P750 - touch pad and internet connection not working

    Touch pad stopped working a few months ago and now can only get internet via the modem. Apparently need a new driver.
    Where do I access this and how do I get the touch pad working again.

    Hello
    At first check what is the status of all hardware components (WLAN, LAN and touchpad) in device manager. Be sure all components are installed properly.
    All necessary drivers you can download from Toshiba download page - http://www.toshiba.eu/innovation/dow...ivers_bios.jsp
    It is not easy to say what is wrong with touchpad. Be sure the touchpad is enabled properly.

  • I have a 27" thunderbolt display NOT the iMac, and I'm trying to connect my xbox 360 to it via the Belkin AV360. I plug everything in and it does not work? I check all the power cables and and connections and still not he issue. Iv'e tried C-F2 also. Help

    I have a 27" thunderbolt display NOT the iMac, and I'm trying to connect my xbox 360 to it via the Belkin AV360. I plug everything in and it does not work? I check all the power cables and and connections and still not he issue. Iv'e tried C-F2 also. has anyone used this devive (AV360) on there own 27" thunderbolt display (not the imac) and gotten it to work? If so I'd appreciate the help.

    There are multiple reasons that lead to issue. You should read the troubleshooting guide to get the right solution to solve the issue: iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support

  • My iphone bluetooth  not connect to my hands free or parrot i have been using iphone 4s with6.0 software always worked now called apple no help so i restored my iphone 4 and that does not work i then tried my daughters iphone

    my iphone 5 bluetooth  not connect to my hands free or parrot i have been using iphone 4s with 6.0 software always worked now called apple no help so i restored my iphone 4  with 6.00 net work and that does not work i then tried my daughters iphone and blackberry and they connected
    I then tried i phone 5 in my daughters and sons car and no luck. I cant  get help from anyone  its a joke

    I found the solution to your problem. It solved mine right away and now I'm able to upload videos directly from my iPhone.
    Go to this thread: https://discussions.apple.com/message/17366529#17366529#17366529

  • I have an iPad 2 and so does my mom.  We both have the app Slotomania and now all of sudden after having it for months, our games connected and we don't know how to fix it.  Deleting it and reinstalling does not work.

    I have an iPad 2 and so does my mom.  We both have the app Slotomania and now all of sudden after having it for months, our games connected and we don't know how to fix it.  Deleting it and reinstalling does not work.

    Does the app now use iCloud, do you use iCloud and do the two of you use the same account on iCloud?
    Just a guess.

  • Ipad displays "ipad is disabled connect to itunes", I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?

    Ipad displays “ipad is disabled connect to itunes”, I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?
    My son let one of his friends use his ipad. The next time he tired to use it he could not get it unlocked, I tired to unlock it but it kept telling me that I had the wrong pass code. With out me knowing my son continued to tire until it completely disabled it self.

    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • When i finally connected my mac to work network on windows environment everything related to apple including App store, Safari, software updates, iCloud and iTunes do not work using a proxy server and everything else is working very well

    when i finally connected my mac to work network on windows environment everything related to apple including App store, Safari, software updates, iCloud and iTunes do not work using a proxy server and everything else is working very well including chrome browser…i tried everything but no clue...anybody have solution for this..???

    I also forgot to note that this problem also persists with the new iBooks application. I cannot get past the 'Get Started' screen or access the iBooks Store. Again, all top bar menus are unresponsive.
    DT

  • HT4587 My airport express and wireless airplay speaker are connected to wife, but airplay and homesharing are not working...what to do?

    My airport express and wireless airplay speaker are connected to WIFI, but airplay and homesharing are not working...what to do?  Everything was working fine until about two weeks ago, all of the sudden airplay has disappeared from the iphone, itunes on the laptop, and the apple remote for iphone.  I have restarted the router many times, re-setup the airplay speaker and the airport express and booth are showing as being properly connected to the router when I log into the router IP address.  I was on the phone with Apple support for 30 minutes they blames verizon, got on the phone with verizon and they stated the settings were all correct and compatible with apple, got back on the phone with apple and they again are blaming verizon and trying to get me to get an airport extreme because that would fix the problem...any suggestions, please!

    There are three Airport resets, soft, hard and factory default.  It would probably be beneficial if you tried each one in sequence.  Actually, you could jump to the factory default reset if you don't mind reconfiguring from scratch.

  • I tried updating software on my iphone and it did not work. My handset has had the picture of the usb cable asking to connect to itunes for hours and i can not switch my phone off or reset it. Please help!

    I tried updating iphone software and it did not work. It just shows connect to itunes with usb cable on the handset. I have tried for hours to try and turn the hanset off and troubleshoot but nothing works. The connect to itunes display can not be over-ridden.
    Please help!!!

    oh and the device is not being recognised by itunes now either.

  • HT201407 Ipod My daughter locked my iPod with a code and now she does not remember it  It is locked and it will not work connected to iTunes

    My daughter locked my iPod with a code and now she does not remember it  It is locked and it will not work connected to iTunes

    Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
    1. iOS- Forgotten passcode or device disabled after entering wrong passcode
    2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    3. Restoring iPod touch after forgotten passcode
    4. What to Do If You've Forgotten Your iPhone's Passcode
    5. iOS- Understanding passcodes
    6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    Forgotten Restrictions Passcode Help
    You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
    Also, see iTunes- Restoring iOS software.

  • TS1398 my wifi connection on our mini ipad is grayed out and cannot connect to wifi, I have tried resetting and that did not work.

    Our wifi  is grayed out on our mini ipad; I have tried resetting network settings and that did not work. Any other suggestions?

    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
     Cheers, Tom

  • Getting sqlplus and odbc connection to work

    I'm looking to automate some data extraction activities either through a windows batch file or set up a data connection in an excel spreadsheet. I've installed (I think) the instant client, but, I'm not seeing any programs to run in my start>All Programs list except Microsoft ODBC Administrator and sqlplus does not work when typed at the command prompt (sqlplusw neither).
    Not sure what I should do next...thanks for looking and your help.
    I currently use sql server and access and have set odbc connections and connections to sql server in excel.
    Here's what the inventory shows:
    Inventory contents of (my-computer):
    Oracle Homes
    OraClient10g_home1
    Oracle Client 10.2.0.1.0
    Oracle Instant Client 10.2.0.1.0
    Oracle ODBC Driverfor Instant Client 10.2.0.1.0
    Oracle JDBC/OCI Instant Client 10.2.0.1.0
    SSL Required Support Files for InstantClient 10.2.0.1.0
    RDBMS Required Support Files for Instant Client 10.2.0.1.0
    SQL*Plus Files for Instant Client 10.2.0.1.0
    HOME SELECTION
    Central Inventory Location: "C:\Program Files\Oracle\Inventory"
    Oracle Home Status
    OraClient10g_home1 Selected
    PATH = D:\oracle\product\10.2.0\client_1\bin;D:\oracle\product\10.2.0\client_1;%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;
    etc, etc, etc
    --------------------------------------------------------------------------------

    thanks
    sqlplus working, had the wrong path, but, not connecting. I did save a copy of the tnsnames.ora from another machine. Here's what it shows, below, I think I need to use the LDAP adapter, but, not sure how to make it use that, sqlnet.ora is:
    SQLNET.AUTHENTICATION_SERVICES= (NTS)
    NAMES.DIRECTORY_PATH= (LDAP, TNSNAMES, EZCONNECT)
    ----command line results------
    C:\>tnsping POST_DBSR.xxx.ourcompany.COM
    TNS Ping Utility for 32-bit Windows: Version 10.2.0.1.0 - Production on 21-SEP-2
    010 07:33:32
    Copyright (c) 1997, 2005, Oracle. All rights reserved.
    Used parameter files:
    D:\oracle\product\10.2.0\client_2\network\admin\sqlnet.ora
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)
    (HOST = 192.168.1.xxx)(PORT = 1521))) (CONNECT_DATA = (SID = post)))
    TNS-12535: TNS:operation timed out

Maybe you are looking for

  • Can't install WIN7 with an external USB DVD

    Hi, Read all posts regarding the install of WIN7. Still none actually worked for me. 1. Details: MacMini late 2009, OS X Mavericks, unusable Apple SuperDrive, external Asus DVD on USB. Stick with drivers for WIN7, created by downloading them from App

  • Internet EXTREMELY overpriced and SLOW

    I'll save the backstory and tell you straight up what the problem is... I get this **bleep**ty internet for $50 dollars a month which is only 1.5 megabits at MAX, I've actually NEVER EVER gotten 1.5 megabits. Now this 1.5 megabits translates into 192

  • Driver for intel cs330 webcam on windows 7

    HI I have a great old webcam a Intel CS330, but i have just bought a new computer and its runing windows 7 and i cant seem to find a driver for it :( Could you please tell me where i may get this from if it is avalible or if it will be anytime soon.

  • XSAN in two buildings

    Has anyone setup XSAN in two different buildings/locations? We are looking to setup XSAN but we may be splitting into two locations. I've call our ISP providers and they said they could do a point to point DS3 but that would only get us 90mb max. The

  • Register IP address and host name of SAP Router

    Does anyone think there would be a problem if we register one IP address now and then register another one later, replacing the first? Thanks.