[SOLVED] Superblock has invalid ext3 journal after change of VMSPLIT

I'm not sure if this is the appropriate forum for this, but here goes..
I recently recompiled a custom kernel (toofishes' Eee kernel) which had NOHIGHMEM=y and VMSPLIT2G=y, enabling highmem and changing the split back to VMSPLIT3G. However, when it came to booting it, my login manager never popped up and instead I got a tty. Logging in gave me this output:
/bin/ls: /lib/librt.so.1: unsupported version 372 of Verdef record
and when I try to start X:
xauth: creating new authority file /home/jickel/.serverauth.1892
/usr/bin/X: error while loading shared libraries: libm.so.6: ELF load command alignment not page-aligned
giving up.
xinit: Connection refused (errno 111): unable to connect to X server
xinit: No such process (errno 3): Server error.
Plus some segfaults when quitting. It seems I did not configure the new memory setting properly, though I did remember to change the CONFIG_PAGE_OFFSET_ VALUE at least.
Now when I try to boot using the default arch kernel to replace the faulty kernel, the file system check fails, and when I manually run fsck I get this question:
Superblock has an invalid ext3 journal (inode 8).
Clear<y>?
I'm still pretty new to Linux, but it seems the change of memory might have forced a change in the FS journal. No idea where to go from here though, and I that answering yes to the above might hose my FS. What do you suggest I do? I recently backed up my system, luckily.
Last edited by Jickel (2008-07-08 20:10:30)

I did it manually, I'll try doing it the other way later then. Thanks for the advice!
I guess those segfaults must have damaged the journals then. I'm still not sure how to repair this though.
UPDATE: Well I deleted the journal, had the file system repaired, and had a new journal created. The fsck command reports everything is fine now, but I still get the "FILE SYSTEM CHECK FAILED - Please repair manually and reboot" box-thingy when I try to reboot. Any idea how do progress from here? I need a working system to update the kernel back to a working one.
Oh, I found another thread where the OP has the same issue http://bbs.archlinux.org/viewtopic.php?pid=385792 . I'll go through the solutions suggested there and see if anything works. No word on results in that thread though.
Last edited by Jickel (2008-07-08 05:37:44)

Similar Messages

7.0 - Cannot save journal after changing content

Hi all,
When I have copied journals to another category or time, and want to change some of its content, I cannot save the journal, as the button 'Save' is not activated. When I post the journal, it does change back to the original entries.
We currently use release 7.0.119.
Thank you for any information or suggestions.
Melanie

Hi Roberto,
do you mean by launching a package copy, if I have tried to copy the data with the data manager package on journal level?
No, I have just copied some journals from one month to the other, say, ACTUAL 2011.NOV to ACTUAL 2011.DEC, and then wanted to change some numbers, and save the journal again. But the icon for saving was not activated.
For now the issue is "solved", as at some stage I have logged off BPC and started it again. But it has happened before, and it is a strange behaviour.
Perhaps it is a service pack issue?
Best regards,
Melanie

Has anyone seen a DRASTIC change in speed after upgrading to 5.7?

Has anyone seen a DRASTIC change in speed after upgrading to 5.7? Just the simple task of copying photos now takes FOREVER. Importing iphoto for just two years of photos (my smallest iphoto library by far) took A WEEK. I did not have access to Lightroom for a week. I thought it was just going to be the iphoto import, but now my regular import is taking almost 1/2 an hour and only 22 photos into the import.

Oh no! I think I might be experiencing the same problem, oddly with almost exactly the same time to import from iPhoto, just shy of 7 days...
I also posted this problem to the form and am actually on the phone with Adobe support right now. I have an iPhoto library of ~15,000 photos and I didn't expect it to be very fast, but it's taking an average of at least 40 seconds per photo to import, and it has kept complete focus of LR so I can't even confirm that it isn't importing duplicates. By my calculations it should take over 166 hours to complete the import! Something has to be wrong here. I've been going for over 48 hours and am scared to stop the import if this really is normal performance.
Are normal import tasks also slow for you now? Can you share any more details? I can't test myself yet since the iPhoto import is still churning, but it could help troubleshooting with support. I'll let you know if they come back with anything, I'm on hold now.

Will the penfailure be solved after changing the cartridges? Installing printer again did not help.

Hp Print Diagnnostic Utility detected 'Pen Failure' I tried reinstalling printer driver again, checked cartridges installation for correctness, cleaned contact points but they did not help. Will the penfailure be solved after changing the cartridges? Installing printer again did not help.
Rajein

Yes, I did try it.
I completely uninstalled Firefox (including personal settings, bookmarks, add-ons etc.) and then I installed Firefox 24 from scratch. The outcome is unchanged. Namely, it installs it and then right when it is about to start for the very first time, it hangs. If I run the task manager I can see the process firefox32. It shows as if it is running. But in fact it is hanging doing nothing. It is almost as if the process is waiting for something to happen and that never occurs. Note that this should not have anything to do with, say, an incompatible add-on/plug in because I had them all removed. I also removed adobe flash prior to the installation and run the malware removal program too.

After changing my e-mail address, two iCloud accounts were created, my iphone is unusable due to password requests every few seconds and my account has been blocked. What can I do?

After changing my e-mail address, two iCloud accounts were created, my iphone is unusable due to password requests every few seconds and my iCloud account has been blocked. What can I do?

So, you are saying that you set up a brand new Apple ID and then signed into iCloud with it, correct?
Are you also saying both accounts are disabled for Security reasons? If not, why can't you sign on with the one that is not disabled?
GB

TS3048 [SOLVED] after changing batteries: keyboard did not connect to iMac

After changing the batteries of my wireless keyboard, it refused to connect to the iMac.
It took me half an hour to discover that it was connected to my iPhone instead.
So if you ever created a BT connection on your iPhone, make sure it does not interfere with the iMac when you swap batteries...
I simply removed the BT connection on my iPhone.
Hope this helps others.

Please use Apple's Troubleshooting wireless mouse and keyboard issues located by clicking http://support.apple.com/kb/ts3048. Also it is wise to keep a cheap USB keyboard & mouse around in the event of bluetooth problems.

Parameter TSTMP1 has invalid value 0

I am getting the following error(dump in the back end)..when I try executing the following ABAP Webdynpro program
http://HOST:8000/sap/bc/webdynpro/sap/asr_processes_display
Runtime Errors UNCAUGHT_EXCEPTION
Exception CX_PARAMETER_INVALID_RANGE
The following error text was processed in the system ED1 : Parameter has invalid value: Parameter TSTMP1 has invalid value 0 .
The error occurred on the application server host_ED1_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: SUBTRACT of program CL_ABAP_TSTMP=================CP
Method: SUBTRACT_TIMESTAMPS of program CL_HRASR00_PROCESS_UTILITIES==CP
Method: GET_CURRENT_TIME_DATA of program CL_HRASR00_PROCESS_UTILITIES==CP
Method: START_TRACKING of program /1BCWDY/2VM0SKJ71MBDIR0QYUEP==CP
Method: IF_COMPONENTCONTROLLER~START_TRACKING of program /1BCWDY/2VM0SKJ71MBDIR0QYUEP==CP
Method: HANDLEDEFAULT of program /1BCWDY/2VM0SKJ71MBDIR0QYUEP==CP
Method: HANDLEDEFAULT of program /1BCWDY/2VM0SKJ71MBDIR0QYUEP==CP
Method: IF_WDR_VIEW_DELEGATE~WD_INVOKE_EVENT_HANDLER of program /1BCWDY/2VM0SKJ71MBDIR0QYUEP==CP
Method: INVOKE_EVENTHANDLER of program CL_WDR_DELEGATING_IF_VIEW=====CP
Method: DISPLAY_TOPLEVEL_COMPONENT of program CL_WDR_CLIENT_COMPONENT=======CP
Any ideas on solving this?

Hi
Any one has any incite into this issue. Pls share it.
I am also facing the same issue. In our case, we have been developing processes and some of the processes are working fine until Friday 10/24. Now we are facing this error. I checked all config changes after Firday. Nothing significant related to processes. No patches applied over the weekend.
Any help is appreciated!
Thank you

[SOLVED] Problems with systemd-update-utmp after systemd update

Hi all,
I noticed that systemd-update-utmp-runlevel.service has been failing since the last systemd update. My systemd is:
Repository : core
Name : systemd
Version : 184-2
$ systemctl status systemd-update-utmp-runlevel.service
systemd-update-utmp-runlevel.service - Update UTMP about System Runlevel Changes
Loaded: loaded (/usr/lib/systemd/system/systemd-update-utmp-runlevel.service; static)
Active: failed (Result: exit-code) since Sat, 02 Jun 2012 13:55:40 +0200; 56min ago
Docs: man:utmp(5)
Main PID: 395 (code=exited, status=1/FAILURE)
CGroup: name=systemd:/system/systemd-update-utmp-runlevel.service
The exact cause of error is:
Jun 02 13:55:40 arch systemd-update-utmp[395]: Failed to write utmp record: No such file or directory
Jun 02 13:55:40 arch systemd[1]: systemd-update-utmp-runlevel.service: main process exited, code=exited, status=1
What's more, after this update I am not able to mount vmware hgfs shares. I've got following entry in my /etc/fstab (from arch's wiki)
#enable shared folders
.host:/ /mnt/hgfs vmhgfs defaults,ttl=5 0 0
It worked just fine. After the update system boots into maintenance mode with the following message found in sysemd-journal:
arch mount[143]: Directory in share name must not be empty
arch mount[143]: Error: share name is invalid, aborting mount
After commenting hgfs mount entry out the system boots normally.
Thanks in advance.
EDIT:
Mounting hgfs shares manually works as expected
$: sudo mount /mnt/hgfs
Could not add entry to mtab, continuing
mtab:
.host:/ /mnt/hgfs vmhgfs rw,relatime 0 0
so this issue must be systemd related
Last edited by mrzeznicki (2012-06-07 15:18:05)

falconindy wrote:Still can't reproduce this. libmount's parser does just fine with ".host" as a dummy entry in my /etc/hosts file mapped for an NFS share.
Yep, libmount is probably not a problem, I guess this error comes from vmware's hgfsmounter
static Bool
ParseShareName(const char *shareName, // IN: Share name to validate
const char **shareNameHost, // OUT: Share name, host component
const char **shareNameDir) // OUT: Share name, dir component
const char *colon, *dir;
/* 1) Must be colon separated into host and dir. */
colon = strchr(shareName, ':');
if (colon == NULL) {
printf("Share name must be in host:dir format\n");
return FALSE;
/* 2) Dir must not be empty. */
dir = colon + 1;
if (*dir == '\0') {
printf("Directory in share name must not be empty\n");
return FALSE;
/* 3) Dir must start with forward slash. */
if (*dir != '/') {
printf("Directory in share name must be an absolute path\n");
return FALSE;
/* 4) Host must be ".host". */
if (strncmp(shareName, ".host:", 6) != 0) {
printf("Host in share name must be \".host\"\n");
return FALSE;
*shareNameHost = ".host";
LOG("Host component of share name is \"%s\"\n", *shareNameHost);
*shareNameDir = dir;
LOG("Directory component of share name is \"%s\"\n", *shareNameDir);
return TRUE;
I am just wondering why it worked before (and why manual mount works). Is there anything in systemd mount layer that consumes '/'?

Invalid date format after APEX upgrade

We are currently working on upgrading our applications from 1.6 to the new APEX 3.2 version. After the upgrade of one of our systems I have a tabular form that is returning the error 'Invalid date format found'. The date that is getting entered into the system is being displayed and choosed via a sql popup. The code for the pop up is
SQL CODE
create or replace view next_weeks as
with t as (
select
trunc(sysdate) + (rownum - 1) / 2 d
from
dual
connect
by rownum <= 28)
, call_info as (
select
c.call_identifier, c.callback_date, c.callback_cancelled
from uid_csr_schedule c
select
to_char(d, 'fmDy MM/DD/YYYY AM') l
, to_char(d, 'dd-mon-yy hh:mi:ss AM') v
,to_char(d, 'mm/dd/yy hh:mi:ss AM') o
from
t
where
((select count(callback_date) from call_info ci where ci.callback_date = t.d
and (ci.callback_cancelled is null or ci.callback_cancelled !='Y'))) <
(select csr_calls_per_period from uid_sch_system_default)
minus
select
to_char(d, 'fmDy MM/DD/YYYY AM') l
, to_char(d, 'dd-mon-yy hh:mi:ss AM') v
,to_char(d, 'mm/dd/yy hh:mi:ss AM') o
from
t
where
(select count(callback_date) from call_info ci where ci.callback_date = t.d
and (ci.callback_cancelled is null or (ci.callback_cancelled !='Y')))
=(select override_amt from uid_sch_call_override
where (to_char(begin_date,'dd-mon-yy') || ' ' || upper(period)) = to_char(t.d, 'dd-mon-yy AM'))
union select
to_char(d, 'fmDy MM/DD/YYYY AM') l
, to_char(d, 'dd-mon-yy hh:mi:ss AM') v
,to_char(d, 'mm/dd/yy hh:mi:ss AM') o
from
t
where
((select count(callback_date) from call_info ci where ci.callback_date = t.d
and (ci.callback_cancelled is null or ci.callback_cancelled !='Y'))) >=
(select csr_calls_per_period from uid_sch_system_default)
and
(select count(callback_date) from call_info ci where ci.callback_date = t.d
and (ci.callback_cancelled is null or (ci.callback_cancelled !='Y')))
<
(select override_amt from uid_sch_call_override
where (to_char(begin_date,'dd-mon-yy') || ' ' || upper(period)) = to_char(t.d, 'dd-mon-yy AM'))
order by o
The form then has the item set as a popup with a date format mask of dd-MON-yy hh:mi:ss AM. The popup displays fine and the date is shown in the field but the error is received when I try to save the information. If I change the application global setting of date format mask to dd-MON-yy hh:mi:ss AM then this error goes away however, it creates problems on all the rest of my pages that use this date in the where clause of the queries. Is there a way to solve the problem above without having to change the globalization parameter or do I need to change this parameter and then redo those queries?
Thanks for your help!
Amber

Amber,
It's interesting that the problem goes away if you set the global date format to be the same as the column level. The column level should trump the global setting. What process is returning the error? Are you sure it's the MRU or could it be something custom?
You could consider adding a process before the MRU fires that uses alter session to change the date format.
Regards,
Dan
Blog: http://DanielMcGhan.us/
Work: http://SkillBuilders.com/

My Macbook Pro has become super slow after upgrading to 10.9.2. can anyone help please?

My Macbook pro has slowed down drastically after upgrading to 10.9.2. It has become so slow that i can hardly use it. I did an etrcheck
Hardware Information:
          MacBook Pro (13-inch, Mid 2012)
          MacBook Pro - model: MacBookPro9,2
          1 2.5 GHz Intel Core i5 CPU: 2 cores
          4 GB RAM
Video Information:
          Intel HD Graphics 4000 - VRAM: 1024 MB
System Software:
          OS X 10.9.2 (13C64) - Uptime: 0 days 0:19:10
Disk Information:
          APPLE HDD TOSHIBA MK5065GSXF disk0 : (500.11 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    Macintosh HD (disk0s2) / [Startup]: 499.25 GB (356.27 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
          MATSHITADVD-R   UJ-8A8
USB Information:
          Apple Inc. FaceTime HD Camera (Built-in)
          Apple Inc. Apple Internal Keyboard / Trackpad
          Apple Computer, Inc. IR Receiver
          Apple Inc. BRCM20702 Hub
                    Apple Inc. Bluetooth USB Host Controller
FireWire Information:
Thunderbolt Information:
          Apple Inc. thunderbolt_bus
Launch Daemons:
          [System] com.adobe.fpsaud.plist 3rd-Party support link
Launch Agents:
          [System] com.hp.devicemonitor.plist 3rd-Party support link
          [System] com.hp.messagecenter.launcher.plist 3rd-Party support link
User Launch Agents:
          [not loaded] com.adobe.ARM.[...].plist 3rd-Party support link
User Login Items:
          iTunesHelper
          Dropbox
          AdobeResourceSynchronizer
Internet Plug-ins:
          FlashPlayer-10.6: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
          QuickTime Plugin: Version: 7.7.3
          AdobePDFViewerNPAPI: Version: 11.0.06 - SDK 10.6 3rd-Party support link
          AdobePDFViewer: Version: 11.0.06 - SDK 10.6 3rd-Party support link
          Flash Player: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
          Default Browser: Version: 537 - SDK 10.9
          Silverlight: Version: 5.1.10411.0 - SDK 10.6 3rd-Party support link
Safari Extensions:
          Adblock Plus: Version: 1.7.4.1135
          Ebay Shopping Assistant: Version: 1.1
          Amazon Shopping Assistant: Version: 1.1
          Slick Savings: Version: 1.0
          Searchme: Version: 1.3
          AdBlock: Version: 2.6.18
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
          AirPlay: Version: 2.0 - SDK 10.9
          AppleAVBAudio: Version: 203.2 - SDK 10.9
          iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
          Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes:
          Flash Player 3rd-Party support link
Old Applications:
          None
Time Machine:
          Time Machine not configured!
Top Processes by CPU:
              29%          Safari
              16%          com.apple.WebKit.WebContent
               5%          PluginProcess
               4%          WindowServer
               3%          com.apple.WebKit.Networking
Top Processes by Memory:
          289 MB          Safari
          131 MB          com.apple.IconServicesAgent
          82 MB          com.apple.WebKit.WebContent
          82 MB          mds_stores
          66 MB          Finder
Virtual Memory Information:
          721 MB          Free RAM
          1.62 GB          Active RAM
          1.05 GB          Inactive RAM
          636 MB          Wired RAM
          1.18 GB          Page-ins
          0 B          Page-outs

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed: Copy a line of text from this web page into the window of another application. Wait for the script to run. It usually takes a few minutes. Then paste the results, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; AC="com.autodesk.AutoCAD com.evenflow.dropbox com.google.GoogleDrive"; H='^[[:space:]]*((127\.0\.0\.1|::1|fe80::1%lo0)[[:space:]]+local|(255\.){3}255[[:space:]]*broadcast)host[[:space:]]*$'; NS=networksetup; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; AT () { o=`file -b "$1" | egrep -v '^(A.{16}t$|cann)'`; Ps "${1##*/} format"; }; Pc () { o=`grep -v '^ *#' "$2"`; l=`wc -l <<< "$o"`; [[ l -gt 25 ]] && o=`head -n25 <<< "$o"`$'\n'"[$((l-25)) more line(s)]"; Pm "$1"; AT "$1"; }; Pm () { [[ "$o" ]] && o=`sed -E '/^ *$/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/(\/Users\/)[^/]+/\1-/g' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id -G | grep -qw 80; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed -n 's/^ *//;5p;6p;8p'; h=(`SP Hardware | awk '/ Id/{print $3}; /Mem/{print $2}'`); o=$h; Ps "Model"; o=$((h[1]<4?h[1]:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d;/[my].*:/d'`; [[ "$o" =~ s:\ [^O]|x([^08]|0[^2]|8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; p=`SP Power`; o=`awk '/Cy/{print $NF}' <<< "$p"`; o=$((o>=300?o:0)); Ps "Battery cycles"; o=`sed -n '/Cond.*: [^N]/{s/^.*://p;}' <<< "$p"`; Ps "Battery condition"; for b in FireWire Thunderbolt USB; do o=`SP $b | sed -En '/:$/{s/ *:$//;x;s/\n//;s/\n.*//;/\)/p;};/^ *(V.+ [0N]|Man).+ /{s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};/Apple|Broadcom|Genesy|Intel|SMSC/{s/.//g;h;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; fdesetup status | grep -q On && o=on || o=; Ps "FileVault"; a=(/ ""); A=(System User); for i in 0 1; do o=`cd ${a[$i]}L*/Lo*/Diag* || continue; for f in *.{cr,h,pa,s}*; do [[ -f "$f" ]] || continue; d=$(stat -f%Sc -t%F "$f"); [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && f="$f *"; echo "$d ${f%%_2*} ${f##*.}"; done | sort | tail`; Pm "${A[$i]} diagnostics"; done; grep -lq '*$' <<< "$o" && printf $'\n\t* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'caug|GPU |hfs: Ru|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|timed? ?o|WARN' -k Message Ane 'SMC:' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); n=$((${#s[*]}-1)); c="${s[*]}"; o=${s[$n]}%; Ps "CPU usage by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); n=$((${#s[*]}-1)); s[$n]=${s[$n]%[+-]}; c="${s[*]}"; o=$((s[$n]>=25000?s[$n]:0)); Ps "Mach ports used by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | awk 'NR>1 && !/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|openld|post[fg]|x)/{print $3}'`; Pm "Extrinsic daemons"; o=`launchctl list | awk 'NR>1 && !/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | egrep -v 'com\.apple\.(CSConfig|server)' | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/StartupItems; do M; done`; Pm "Startup items"; sys=`pkgutil --regexp --only-files --files com.apple.pkg.* | sort | uniq | sed 's:^:/:'`; b=`sed -E '/^.+Lib.+\/Contents\/Info.plist$/!d;s/\/Info.plist$//;/Contents\/./d' <<< "$sys"`; l=`egrep '^/usr/lib/.+dylib$' <<< "$sys"`; [[ "$b" && "$l" ]] && { o=`find -L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type d -name Contents -prune | grep -Fv "$b" | while read d; do test -f "$d/Info.plist" || continue; ID=$($PB\ :CFBundleIdentifier "$_") || ID="No bundle ID"; printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find /usr/lib -type f -name *.dylib | grep -Fv "$l"`; Pm "Extrinsic shared libraries"; :; } || echo $'\nReceipts missing'; o=`for e in INSERT_LIBRARIES LIBRARY_PATH; do launchctl getenv DYLD_$e; done`; Pm "Inserted dylibs"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; i=`route -n get default | awk '/e:/{print $2}'`; I=`$NS -listnetworkserviceorder | sed -En '/ '$i'\)$/{x;s/^$.+$ //p;q;};x'`; n=`$NS -getdnsservers "$I" | awk '!/^T/{printf "not "; exit}'`; Ps "DNS (${n}from DHCP)"; o=`$NS -getinfo "$I" | awk '/k:/{if ($3 !~ "(255\.){3}0") print}; /v6:/{if ($2 !~ "A") print}'`; Pm "TCP/IP"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; f=/etc/hosts; Pc "hosts" <(egrep -v "$H" $f ); AT $f; Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; LD="$(`find /S*/*/F* -type f -name lsregister | head -n1` -dump)"; o=`for ID in $AC; do [[ "$LD" =~ $ID ]] && echo $ID; done`; Pm "Application check"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l`; Ps "Restricted user files"; cd; o=`find . -maxdepth 1 -exec basename {} + | while read f; do [[ ("$f" =~ ^\.. && ! "$f" =~ ^\.(adobe|android|bash.+|CFU.+|cache|config|cups|dropbox|DS_Store|filezilla|font.+|git.+|profile|rnd|sh_.+|ssh|subv.+|Trash(es)?|zprofile|zsh.+)$) || ($(stat -f%f "$f") -ge 32768 && "$f" != Library) ]] && ls -Fd "$f"; done`; Pm "Hidden user files"; o=`SP Fonts | egrep 'id: N|te: Y' | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=; [[ UID -eq 0 ]] && o=root; Ps "UID"; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Error after changing password in Discoverer Viewer (11.1.1.4)

I (and all other users) get the below error after changing the password used to login to Discoverer Viewer...
Weblogic Version 10.3.4
Discoverer Version 11.1.1.4
Error
The application encounters an invalid state. .
- java.rmi.RemoteException: ORA-06510: PL/SQL: unhandled user-defined exception ORA-06512: at "REP_DISCOVERER_PS.WWSSO_API_PRIVATE", line 279 ORA-01403: no data found ORA-06512: at line 1 ; nested exception is: oracle.discoiv.beans.ConnectionStoreException: ORA-6510: unhandled user-defined exception ORA-06512: at "REP_DISCOVERER_PS.WWSSO_API_PRIVATE", line 279 ORA-01403: no data found ORA-06512: at line 1
I have already tried the following oracle note (which did not work): http://docs.oracle.com/cd/E17904_01/doc.1111/e14770/discoverer.htm#BABDJJBE
"43.1.1 Issues with Metadata Repository and Oracle Database 10g Release 1"
But we have Oracle Database 11g.
If anyone has any suggestions please advise. I have had a ticket open with Oracle Support now for a few months and they cannot reproduce.
Thanks,
Justin

We also see this same error when attempting to Create a Connection in Oracle BI Discoverer 11g. I am able to connect to a database but not able to save a connection to said database....
A connection error.
- Oracle BI Discoverer Viewer cannot save the connection. Check for other errors.
- ORA-06510: PL/SQL: unhandled user-defined exception ORA-06512: at "REP_DISCOVERER_PS.WWSSO_API_PRIVATE", line 279 ORA-01403: no data found ORA-06512: at line 1

Problems with OEM after changing a database's hostname

I am having a whole pile of trouble after changing the hostname of an Oracle server 10g R1 -- it's actually 10.1.0.3.0 x86_64 on a Red Hat Enterprise Linux 4.0 server.
Specifically, I had a server called "foo" on which I installed 10g R1, with the SID and service ID both "BB8PROD". Then I realized that I had to rename the server to "bar", which I did (via /etc/sysconfig/network and /etc/hosts).
Then, I edited $ORACLE_HOME/network/admin/tnsnames.ora and $ORACLE_HOME/network/admin/listener.ora to reflect the new host names. I restarted the listener and the database, both of which came up fine.
However, when I start OEM via "emctl start dbconsole"), it still gives me the management URL of http://bar.domain.name:5500/em/. Obviously, that's the <i>old</i> hostname and not the new one. If I visit that URL (which I can keep alive via a CNAME in DNS), then I get the following message despite the instance running just fine in the background:
"Database: BB8PROD
The database status is currently unavailable. It is possible that the database is in mount or nomount state. Click 'Startup' to obtain the current status and open the database. If the database cannot be opened, click 'Perform Recovery' to perform an appropriate recovery operation."
It seems that OEM doesn't know where to find the instance since I changed the name in the listener and tnsnames files. I've tried using <tt>emca -r</tt> to OEM start on the correct hostname (i.e., bar) but even when I do that, it still can't connect to the database.
I found this URL about changing port numbers and the associated XML files that OEM calls, but that didn't solve my issue. I've looked online for help, and most of the articles I've found are about 10g R2, where OEM seems easier to reconfigure.
So, when changing the hostname of a database, what am I supposed to do to OEM to have it recognize the changes?
Thanks!
Chris

Hello Dieter,
I do not have a direct answer to your question, however , I am using an ECC6 system and I checked the two tables that you mentioned (SRGBTBREL & SRRELROLES). SRRELROLES has 3.8 million entries and SRGBTBREL has 2700 entries.
I would talk to your authorizations people to see if there is a generation or maintenance step that needs to be performed.
Not a lot of help I know. Good luck
Greg Kern

Deletion or rversal of Cash Journal After Print Out

Hi All,
I want to delete or reverse the Cash Journal After the Print out has been taken. We have received the cash from the customer and have deposited the same in the bank and has taken the print out of the receipt as well. Now i want to change the posting date.
How i can go for that.
Please Help.
Thanks and Regards
Deepak

Hi Deepak,
Refer SAP Note-359656 - FBCJ: receipt printed - reversal not possible. SAP has for security reasons specifically made this check.Alternatively,if you want to reverse the receipt from customer just post one payment for the same customer on the same day as posting date.
Assign points if the tip found useful
Regards
Gopal

Tax code F6 for country SE has been deleted or incorrectly changed

Hello All
I am trying to clear one customer Invoice thru T.code F-28. After giving all parameters when simulating i am getting error message "Tax code F6 for country SE has been deleted or incorrectly changed"
Message # FS201.
We are using ECC 6 version.
Any one solved this error please help me.
Regrads
Ravi Kiran

Hi ,
I had Solve my problem ,
This error can happen because of many reason,
1. The insistence for tax code would be because the G/L account used
has been made relevant for tax. Hence the system will not allow to post
the document without tax code.
2. If the tax code is not activated for any condition type (maintainanceof tax rate) using table 003 (Tax classification).
3. If G/L accounts are not assigned to any deductible condition in the
tax procedure.
4. If it is an input tax code then not assiging it to company code
in the following customising node.
SPRO > Logictics general > Tax on goods mvmt > India > Determination
of excise duty > Asssign tax code to company code..
5. If the requirement routine 166 is assigned to the main service tax
condition also.
Thanks
Devang

Photosmart 7510 aio - Colors are wrong after changing Magenta Cartridge

Hi,
I have an isue where my 7510 aio printer wont print Yellow and coloer scheme seems all messed up after changing the Magenta Cartridge yesterday.
All other cartridiges was not changed but for some reason the color cheme of the printer is messed up. I tried another Magenta Cartridge but it still seem strange.
When I print out a status report the
- Foto-Color is more brown than black.
- The Magenta looks ok (Very pink)
- Cyan is blue / purple looking
- Yellow is Orange
- Black is ok black.
I tried running a clean and adjust but non of that works.
I tried taking out all cartrigdes and re-inserting them and that wont work either.
Anybody has an idea of what could be wrong and how I can correct it?
Thanks
Jakob

Hello NikDk, and welcome to the HP Forums, I hope you enjoy your experience!
I see you're having print quality issues. I would like to help with that!
First thing I would suggest, would be a power reset. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
Second, I would recommend utilizing this document on Fixing Ink Streaks, Faded Prints, and Other Common Print Quality Problems.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

[SOLVED] Superblock has invalid ext3 journal after change of VMSPLIT

Similar Messages

Maybe you are looking for