[Solved] Suspend to ram doesn't work correctly on Acer Aspire 5100
Hi people of the archlinux forum.
Finally I decided to change from ubuntu to archlinux because I wanted to learn more about the world of linux.:D
I have already almost completely set up my laptop, but I have a problem when suspending to ram. The problem comes out when i wake up the laptop, and the screen starts to flicker and will not go away until i restart the laptop.
This is my laptop after the suspend:
I'm using pm-utils to suspend and hibernate my laptop, and the hibernate works fine. All settings were made following the arch wiki.
this is my xorg.conf
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "dri"
Load "extmod"
Load "glx"
Load "dbe"
Load "dri2"
Load "record"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
#DisplaySize 330 210 # mm
Identifier "Monitor0"
VendorName "AUO"
ModelName "2174"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "Dac6Bit" # [<bool>]
#Option "Dac8Bit" # [<bool>]
#Option "BusType" # [<str>]
#Option "CPPIOMode" # [<bool>]
#Option "CPusecTimeout" # <i>
#Option "AGPMode" # <i>
#Option "AGPFastWrite" # [<bool>]
#Option "AGPSize" # <i>
#Option "GARTSize" # <i>
#Option "RingSize" # <i>
#Option "BufferSize" # <i>
#Option "EnableDepthMoves" # [<bool>]
#Option "EnablePageFlip" # [<bool>]
#Option "NoBackBuffer" # [<bool>]
#Option "DMAForXv" # [<bool>]
#Option "FBTexPercent" # <i>
#Option "DepthBits" # <i>
#Option "PCIAPERSize" # <i>
#Option "AccelDFS" # [<bool>]
#Option "IgnoreEDID" # [<bool>]
#Option "CustomEDID" # [<str>]
#Option "DisplayPriority" # [<str>]
#Option "PanelSize" # [<str>]
#Option "ForceMinDotClock" # <freq>
#Option "ColorTiling" # [<bool>]
#Option "VideoKey" # <i>
#Option "RageTheatreCrystal" # <i>
#Option "RageTheatreTunerPort" # <i>
#Option "RageTheatreCompositePort" # <i>
#Option "RageTheatreSVideoPort" # <i>
#Option "TunerType" # <i>
#Option "RageTheatreMicrocPath" # <str>
#Option "RageTheatreMicrocType" # <str>
#Option "ScalerWidth" # <i>
#Option "RenderAccel" # [<bool>]
#Option "SubPixelOrder" # [<str>]
#Option "ShowCache" # [<bool>]
#Option "ClockGating" # [<bool>]
#Option "VGAAccess" # [<bool>]
#Option "ReverseDDC" # [<bool>]
#Option "LVDSProbePLL" # [<bool>]
#Option "AccelMethod" # <str>
#Option "DRI" # [<bool>]
#Option "ConnectorTable" # <str>
#Option "DefaultConnectorTable" # [<bool>]
#Option "DefaultTMDSPLL" # [<bool>]
#Option "TVDACLoadDetect" # [<bool>]
#Option "ForceTVOut" # [<bool>]
#Option "TVStandard" # <str>
#Option "IgnoreLidStatus" # [<bool>]
#Option "DefaultTVDACAdj" # [<bool>]
#Option "Int10" # [<bool>]
#Option "EXAVSync" # [<bool>]
#Option "ATOMTVOut" # [<bool>]
#Option "R4xxATOM" # [<bool>]
#Option "ForceLowPowerMode" # [<bool>]
#Option "DynamicPM" # [<bool>]
#Option "NewPLL" # [<bool>]
#Option "ZaphodHeads" # <str>
Identifier "Card0"
Driver "radeon"
VendorName "ATI Technologies Inc"
BoardName "RS482 [Radeon Xpress 200M]"
BusID "PCI:1:5:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
I know you maybe need more info, but i don't really know what do you need... please tell me what do you need and a post it!
Sorry for my english this isn't my native languaje... Thanks you for all
Last edited by geonunez (2010-07-08 20:19:09)
I have the same problem with my Acer Aspire 5100 (video ATI Xpress1100).
xorg.conf is not used. Turning KMS off doesn`t help.
I have tried to use uswsusp, but it doesn`t help. s2ram -n output correctly identify my laptop, which means it is in "whitelist" and correct settings for this hardware is known. s2ram suspend works, but screen blinking after waking up remains the same.
[Sydorenko@SLE ~]$ sudo s2ram -n
Machine matched entry 17:
sys_vendor = 'Acer *'
sys_product = 'Aspire 5100 *'
sys_version = ''
bios_version = ''
Fixes: 0x3 S3_BIOS S3_MODE
This machine can be identified by:
sys_vendor = "Acer "
sys_product = "Aspire 5100 "
sys_version = "V3.10A"
bios_version = "V3.10A"
See http://suspend.sf.net/s2ram-support.html for details.
Last edited by SydMax (2010-06-06 16:53:50)
Similar Messages
-
Hi.
I would like to ask for one thing: i can't suspend to ram or resume from suspend to ram.
I treid to check over www in order to find some help, some solutions, and how to fix that. Unfortunately, i found these:
https://forums.opensuse.org/showthread. … 13-2/page2
https://bugzilla.opensuse.org/show_bug.cgi?id=913105
https://forums.opensuse.org/showthread. … S-13-1-x64
Bug 91921 - WD 2TB Caviar black causes hard lock on resume S2RAM
https://bugzilla.kernel.org/show_bug.cgi?id=91921
In fact, when i was researching of this problem i wanted to check if my graphic card and memory are failing so a did few changes (removed memory stick and so one) but in doing this i removed almost all of my hard disk drives because i didn't want to hurt them with many reboots or resets.
What did i find? It is strange, kernel version is not important because i checked most of them.
I removed 2x2TB Seagate F14 series along with 4x3TB WD Green. Then i checked s2ram, it went to suspend, and resumes correctly. Everything works. I put it to sleep with s2ram -f -a 1. Works
I attached my 4x3TB WD Green drives. I put computer to sleep with s2ram...it causes hard lock, black screen, i could do only poweroff by powerbutton. s2ram -f -a 1 causes freez. Sometimes, but not constantly, s2ram -f -a 3 -p is being able to suspend...(mostly it does a freez, hard lock computer) but sometimes it is able to put it to a sleep, but resume just freezes everyting - no blinking cursor, no blinking num lock led and so on.
I know that you would suggest me to check logs - this is the main problem. Logs for pm-suspend works when i suspend or resume without WD drives attached. When i have them connected, i'm not able to check pm-logs because computer hangs, freezes and logs are not being stored/writed to pm-suspend.log and pm-powersave.log.
Could somebody help? Point me to a solution? I can't check logs because there are not any when freezing occurs. I checked openSuse thread and many others and for other systems there were some kernel fixex, patches.
They wrote that WD blacks are at fault because they don't have APM. Well, in fact my WD Green have APM with very aggresive factory settings: they park heads over 8 seconds not being used. I disabled it in firmware but disabling it is not the point and not the problem. People have the same problem even with APM and parking heads on other WD drives, i found it that some have it with WD Red's drives and even with very old 320GB WD Blue series - what is more funny, i have 640GB AAKS blue from WD and with this drive i can suspend or resume - APM on this drive is also unavilable, like in Green series because i changed it with wdidle with prebootable cd. I can't supend or resume with 3TB WD Greens.
BTW - suspend to disk, with pm-utils and uswsusp works ok, in 100% every time. (i had to add "shutdown method = shutdown" to /etc/suspend.conf from uswsusp package).
On Windows machine it works. Can suspend, can resume, can hibernate.
Last edited by firekage (2015-03-07 03:27:28)Hm, sometimes i found myself astonished because some things just does not work at all on one machine, while the other one has no problem at all. I was trying to find why suspend to ram won't work at all...and while i was searching i found one topic that was leading to upower dbus. Similar problem with upower i found, by coincidence, on Manjaro forum.
dbus-send --system --print-reply --dest="org.freedesktop.UPower" /org/freedesktop/UPower org.freedesktop.UPower.Suspend
this command above returns all the time:
Error org.freedesktop.DBus.Error.UnknownMethod: Method "Suspend" with signature "" on interface "org.freedesktop.UPower" doesn't exist
I tried this:
sudo systemctl enable acpid.service
sudo systemctl --system daemon-reload
sudo systemctl restart systemd-logind
As soon as i enabled and started acpid.service...my supend to ram, from kde, works like a charm, without graphic problem, or freezing.
There is few question: why on my desktop suspend doesen't work out of the box, when even archwiki says it should? Why on my netbook machine (Acer AOD270) that has the same package installed it works out of the box? Why on my desktop machine acpid.service was not enabled, was not started and was not running while on the notebook it does?
Anyway...i fixed it by a big coincidence because on Fedora forum somebody has problem with suspend to ram with nvidia GTX750 and this card was new like my card (GTX660). He posted the same problem with upower that i posted in quotes and because of this i found another thing on Manjaro forum and that was it!
BTW - this problem, i now think, is not related to my WD drives because it works with them. I think that there was another one ugly thing that broke my suspend to ram ability - bios of my motherboard (so called uefi bios with support for old one) has no option for S1-S5 stated (like the previous motherboards had) and only have ASPM...and ASPM is in my opinion broken but i will try to veryfi it one again later.
Last edited by firekage (2015-03-07 03:29:20) -
[SOLVED] Suspend to ram / disk not working in newer kernels
Hi all,
this puzzles me for a while:
My desktop system was able to suspend to ram / disk flawlessly in older kernels. It stopped working with 3.3. The suspend seems to work, the machine goes to standby. But when I try to resume, the machines is on but the screen stays black. Neither the console is working nor can I ssh into it. Only hard reset gets me out here
I did investigate and found many tips and hints which all led to nowhere. I even changed my filesystem back from btrfs to ext4 and my VGA module from proprietary nvidia to nouveau.
When this all failed I got to the idea to burn several install disks. One of the official 2011.08.19 (kernel 3.0.3) and one of the snapshots 2012.06.05_04-00-01 (kernel 3.3.7) and 2012.07.17_04-00-01 (kernel 3.4.4). I guess these can not be compromised by some hosed installation. I started one by one and issued the follwing command:
echo mem > /sys/power/state
which suspends the machine successfully in all three cases. With 2011.08.19 the resume is working but the other two fail. Some more info about the hardware:
1. lspci output
harvey@obelix ~ $ lspci
00:00.0 Host bridge: Intel Corporation Core Processor DMI (rev 11)
00:03.0 PCI bridge: Intel Corporation Core Processor PCI Express Root Port 1 (rev 11)
00:05.0 PCI bridge: Intel Corporation Core Processor PCI Express Root Port 3 (rev 11)
00:08.0 System peripheral: Intel Corporation Core Processor System Management Registers (rev 11)
00:08.1 System peripheral: Intel Corporation Core Processor Semaphore and Scratchpad Registers (rev 11)
00:08.2 System peripheral: Intel Corporation Core Processor System Control and Status Registers (rev 11)
00:08.3 System peripheral: Intel Corporation Core Processor Miscellaneous Registers (rev 11)
00:10.0 System peripheral: Intel Corporation Core Processor QPI Link (rev 11)
00:10.1 System peripheral: Intel Corporation Core Processor QPI Routing and Protocol Registers (rev 11)
00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06)
00:1a.1 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06)
00:1a.2 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06)
00:1a.7 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06)
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06)
00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 06)
00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06)
00:1d.1 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06)
00:1d.2 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06)
00:1d.3 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06)
00:1d.7 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a6)
00:1f.0 ISA bridge: Intel Corporation 5 Series Chipset LPC Interface Controller (rev 06)
00:1f.2 IDE interface: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA IDE Controller (rev 06)
00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 06)
00:1f.5 IDE interface: Intel Corporation 5 Series/3400 Series Chipset 2 port SATA IDE Controller (rev 06)
01:00.0 VGA compatible controller: NVIDIA Corporation G84 [GeForce 8600 GT] (rev a1)
02:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03)
03:00.0 SATA controller: JMicron Technology Corp. JMB363 SATA/IDE Controller (rev 02)
03:00.1 IDE interface: JMicron Technology Corp. JMB363 SATA/IDE Controller (rev 02)
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
3f:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-Core Registers (rev 04)
3f:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 04)
3f:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 04)
3f:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 04)
3f:03.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller (rev 04)
3f:03.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Target Address Decoder (rev 04)
3f:03.4 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Test Registers (rev 04)
3f:04.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Control Registers (rev 04)
3f:04.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Address Registers (rev 04)
3f:04.2 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Rank Registers (rev 04)
3f:04.3 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Thermal Control Registers (rev 04)
3f:05.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Control Registers (rev 04)
3f:05.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Address Registers (rev 04)
3f:05.2 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Rank Registers (rev 04)
3f:05.3 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Thermal Control Registers (rev 04)
2. lsmod output of 2012.07.17_04-00-01:
harvey@obelix ~ $ lsmod
Module Size Used by
fuse 68768 0
tun 15297 0
rfcomm 33627 8
bnep 8793 2
nfsd 246714 2
exportfs 3665 1 nfsd
btusb 11764 0
joydev 9991 0
bluetooth 190551 22 bnep,btusb,rfcomm
rfkill 15604 2 bluetooth
snd_hda_codec_realtek 60409 1
snd_hda_intel 24053 3
snd_hda_codec 94305 2 snd_hda_codec_realtek,snd_hda_intel
microcode 12185 0
i7core_edac 17477 0
snd_hwdep 6300 1 snd_hda_codec
i2c_i801 8180 0
iTCO_wdt 12813 0
snd_pcm 74958 2 snd_hda_codec,snd_hda_intel
r8169 49386 0
coretemp 5654 0
edac_core 36656 3 i7core_edac
iTCO_vendor_support 1929 1 iTCO_wdt
serio_raw 4653 0
pcspkr 1899 0
snd_page_alloc 7185 2 snd_pcm,snd_hda_intel
snd_timer 18966 1 snd_pcm
mii 4123 1 r8169
snd 58997 12 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_pcm,snd_hda_codec,snd_hda_intel
soundcore 5410 1 snd
acpi_cpufreq 5933 0
mperf 1235 1 acpi_cpufreq
evdev 9754 4
processor 26567 1 acpi_cpufreq
vboxnetadp 18387 0
vboxnetflt 16743 0
vboxdrv 1791382 2 vboxnetadp,vboxnetflt
nfs 276056 1
nfs_acl 2359 2 nfs,nfsd
lockd 62987 2 nfs,nfsd
auth_rpcgss 32327 2 nfs,nfsd
sunrpc 184998 12 nfs,nfsd,auth_rpcgss,lockd,nfs_acl
fscache 41059 1 nfs
aes_x86_64 7508 64
cryptd 8741 0
aes_generic 26138 1 aes_x86_64
xts 3101 32
gf128mul 6050 1 xts
dm_crypt 16496 4
dm_mod 70918 9 dm_crypt
sr_mod 14823 0
cdrom 35648 1 sr_mod
hid_logitech 16560 0
ff_memless 4690 1 hid_logitech
usbhid 36430 1 hid_logitech
hid 85285 2 hid_logitech,usbhid
sd_mod 29239 7
pata_jmicron 2480 0
usb_storage 44760 0
pata_acpi 3408 0
ata_piix 23160 5
crc32c_intel 1987 0
ahci 20549 0
libahci 20023 1 ahci
ata_generic 3295 0
libata 167611 6 ahci,pata_acpi,libahci,ata_generic,ata_piix,pata_jmicron
scsi_mod 132974 4 usb_storage,libata,sd_mod,sr_mod
uhci_hcd 23372 0
xhci_hcd 81440 0
ehci_hcd 40994 0
usbcore 147533 8 btusb,uhci_hcd,usb_storage,ehci_hcd,usbhid,xhci_hcd
usb_common 954 1 usbcore
floppy 58615 0
nouveau 784289 3
button 4502 1 nouveau
video 11307 1 nouveau
mxm_wmi 1425 1 nouveau
wmi 8475 2 mxm_wmi,nouveau
i2c_algo_bit 5391 1 nouveau
drm_kms_helper 33051 1 nouveau
ttm 64288 1 nouveau
drm 208926 5 ttm,drm_kms_helper,nouveau
i2c_core 20369 5 drm,i2c_i801,drm_kms_helper,i2c_algo_bit,nouveau
ext4 424175 4
crc16 1359 2 ext4,bluetooth
jbd2 73919 1 ext4
mbcache 5977 1 ext4
3. /var/log/pm-suspend.log of a not working suspend
Initial commandline parameters:
Tue Jul 17 11:21:18 CEST 2012: Running hooks for suspend.
Running hook /usr/lib/pm-utils/sleep.d/00logging suspend suspend:
Linux obelix 3.4.5-1-ARCH #1 SMP PREEMPT Mon Jul 16 21:35:54 CEST 2012 x86_64 GNU/Linux
Module Size Used by
rfcomm 33627 8
bnep 8793 2
nfsd 246714 2
exportfs 3665 1 nfsd
ext4 424175 3
jbd2 73919 1 ext4
mbcache 5977 1 ext4
btusb 11764 0
bluetooth 190551 22 bnep,btusb,rfcomm
crc16 1359 2 ext4,bluetooth
joydev 9991 0
rfkill 15604 2 bluetooth
snd_hda_codec_realtek 60409 1
microcode 12185 0
coretemp 5654 0
serio_raw 4653 0
snd_hda_intel 24053 5
snd_hda_codec 94305 2 snd_hda_codec_realtek,snd_hda_intel
pcspkr 1899 0
snd_hwdep 6300 1 snd_hda_codec
snd_pcm 74958 3 snd_hda_codec,snd_hda_intel
snd_page_alloc 7217 2 snd_pcm,snd_hda_intel
r8169 49386 0
i7core_edac 17477 0
snd_timer 18966 1 snd_pcm
edac_core 36656 3 i7core_edac
mii 4123 1 r8169
snd 58997 15 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_pcm,snd_hda_codec,snd_hda_intel
iTCO_wdt 12813 0
i2c_i801 8180 0
soundcore 5410 1 snd
iTCO_vendor_support 1929 1 iTCO_wdt
acpi_cpufreq 5933 0
mperf 1267 1 acpi_cpufreq
evdev 9754 4
processor 26567 1 acpi_cpufreq
vboxnetadp 18387 0
vboxnetflt 16743 0
vboxdrv 1791382 2 vboxnetadp,vboxnetflt
nfs 276056 1
nfs_acl 2359 2 nfs,nfsd
lockd 62987 2 nfs,nfsd
auth_rpcgss 32327 2 nfs,nfsd
sunrpc 184998 12 nfs,nfsd,auth_rpcgss,lockd,nfs_acl
fscache 41059 1 nfs
btrfs 710578 1
libcrc32c 1002 1 btrfs
zlib_deflate 20436 1 btrfs
aes_x86_64 7508 64
cryptd 8741 0
aes_generic 26138 1 aes_x86_64
xts 3101 32
gf128mul 6050 1 xts
hid_logitech 16560 0
ff_memless 4690 1 hid_logitech
dm_crypt 16496 4
dm_mod 70918 9 dm_crypt
sr_mod 14823 0
cdrom 35648 1 sr_mod
usbhid 36430 1 hid_logitech
usb_storage 44760 0
hid 85285 2 hid_logitech,usbhid
sd_mod 29239 7
pata_jmicron 2480 0
pata_acpi 3408 0
ata_piix 23160 5
ata_generic 3295 0
uhci_hcd 23404 0
crc32c_intel 1987 1
ahci 20549 0
libahci 20023 1 ahci
libata 167611 6 ahci,pata_acpi,libahci,ata_generic,ata_piix,pata_jmicron
xhci_hcd 81472 0
ehci_hcd 41026 0
scsi_mod 132974 4 usb_storage,libata,sd_mod,sr_mod
usbcore 147565 8 btusb,uhci_hcd,usb_storage,ehci_hcd,usbhid,xhci_hcd
usb_common 954 1 usbcore
floppy 58615 0
nouveau 784321 3
button 4502 1 nouveau
video 11307 1 nouveau
mxm_wmi 1425 1 nouveau
wmi 8475 2 mxm_wmi,nouveau
i2c_algo_bit 5391 1 nouveau
drm_kms_helper 33051 1 nouveau
ttm 64320 1 nouveau
drm 208958 5 ttm,drm_kms_helper,nouveau
i2c_core 20369 5 drm,i2c_i801,drm_kms_helper,i2c_algo_bit,nouveau
total used free shared buffers cached
Mem: 8173500 884060 7289440 0 3764 405872
-/+ buffers/cache: 474424 7699076
Swap: 8386556 0 8386556
/usr/lib/pm-utils/sleep.d/00logging suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00powersave suspend suspend:
/usr/lib/pm-utils/sleep.d/00powersave suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/01grub suspend suspend:
/usr/lib/pm-utils/sleep.d/01grub suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend:
/usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/75modules suspend suspend:
/usr/lib/pm-utils/sleep.d/75modules suspend suspend: success.
Running hook /etc/pm/sleep.d/90alsa suspend suspend:
/etc/pm/sleep.d/90alsa suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/90clock suspend suspend:
/usr/lib/pm-utils/sleep.d/90clock suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend:
/usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/95led suspend suspend:
/usr/lib/pm-utils/sleep.d/95led suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend:
Kernel modesetting video driver detected, not using quirks.
/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/99video suspend suspend:
kernel.acpi_video_flags = 0
/usr/lib/pm-utils/sleep.d/99video suspend suspend: success.
Tue Jul 17 11:21:18 CEST 2012: performing suspend
This seems to be a kernel bug. Any input?
Harvey
Last edited by Harey (2012-08-06 13:51:49)Another life-sign. The issue is still unsolved but I've come a little further. It seems to be a combination of more failures. The first one is USB hardware. I have a usb keyboard-mouse combo from Logitech (comfort cordless desktop). The USB bus does not wake up correctly when resuming from suspend. So my keyboard is unsuable. I put in a file /etc/pm/sleep.d/20_custom-ehci_hcd with the following content:
BUSES="0000:00:1a.7 0000:00:1d.7"
case "${1}" in
hibernate|suspend)
# Switch USB buses off
for bus in $BUSES; do
echo -n $bus | tee /sys/bus/pci/drivers/ehci_hcd/unbind
done
resume|thaw)
# Switch USB buses back on
for bus in $BUSES; do
echo -n $bus | tee /sys/bus/pci/drivers/ehci_hcd/bind
done
esac
The bus IDs were taken from /sys/bus/pci/drivers/ehci_hcd
When I start pm-suspend from a console (no X started) this seems to reanimate my keyboard while the screen stays black (with backlight on). I can type and reboot. Also I can ssh into the machine from my laptop.
Concerning the blank screen there seems to be a bug in both the proprietary nvidia modules as well as the nouveau driver. The nvidia folks have issued a new beta driver which seems to at least minimize the failures. This all concerns the nv50-family of nvidias cards. I have a GF8600GT which is one of these
I'll wait for this driver and then restart my testing. Until then - no suspend/hibernate
EDIT: Today's nvidia 304.32 is solving my issues - I can sleep again
Harvey
Last edited by Harey (2012-08-06 13:52:51) -
[Solved] Suspend to RAM no longer works
Suspend to RAM when closing my laptop lid worked out the box for me since I put Arch on my Dell XPS 14. After doing a pacman -Su yesterday (where I noticed that the kernel was updated, but it might be something else) it no longer works. Running 'systemctl suspend' in the terminal does work. Do I have to update a config?
Last edited by skip (2014-04-01 19:48:23)For anyone else that finds this, systemd 212 doesn't suspend with lid closed with or without external monitor for those using the Nvidia proprietary drivers. Nvidia doesn't provide the necessary information for systemd to know whether or not an external monitor is connected, and thus it plays it safe and doesn't suspend. This is explained nicely at the Freedesktop bug linked above, but I wanted to pass it along here for those that won't follow the link.
Sounds like they're leaning toward reversing the preference (dock/external display users will need to opt out of suspending with lid close) in future versions since non-dock/monitor users >> dock/monitor users. -
Hello,
I tried to get Suspend to Ram, but whatever way I use. Nothing worked.
First try was with
echo -n "mem" > /sys/power/state
I then got only a blinking cursor on a black screen for 20 seconds and then I see my console back with the error message
write error: Resource temporarily unavailable
Next thing the hibernate-scripts.
I changed hibernate.conf to
#TryMethod suspend2.conf
#TryMethod disk.conf
TryMethod ram.conf
After a run I have the same behaviour like in the first method.
cat /var/log/hibernate.log outputs
Starting suspend at Thu Mar 15 09:54:41 CET 2007
hibernate: [01] Executing CheckLastResume ...
hibernate: [01] Executing CheckRunlevel ...
hibernate: [01] Executing LockFileGet ...
hibernate: [01] Executing NewKernelFileCheck ...
hibernate: [10] Executing EnsureSysfsPowerStateCapable ...
hibernate: [11] Executing XHacksSuspendHook1 ...
hibernate: [59] Executing RemountXFSBootRO ...
hibernate: [89] Executing SaveKernelModprobe ...
hibernate: [91] Executing ModulesUnloadBlacklist ...
hibernate: [95] Executing XHacksSuspendHook2 ...
hibernate: [97] Executing VbetoolSaveState ...
'vbetool' utility not found. Vbetool disabled.
hibernate: [98] Executing CheckRunlevel ...
hibernate: [99] Executing DoSysfsPowerStateSuspend ...
hibernate: Activating sysfs power state mem ...
hibernate: [97] Executing VbetoolRestoreState ...
hibernate: [90] Executing ModulesLoad ...
hibernate: [89] Executing RestoreKernelModprobe ...
hibernate: [85] Executing XHacksResumeHook2 ...
hibernate: [70] Executing ClockRestore ...
hibernate: [59] Executing RemountXFSBootRW ...
hibernate: [11] Executing XHacksResumeHook1 ...
hibernate: [01] Executing NoteLastResume ...
hibernate: [01] Executing LockFilePut ...
Resumed at Thu Mar 15 09:55:04 CET 2007
Ok for the last attempt I installed powersave, run the powersaved daemon and typed "powersave -u" into my console.
My machine switched to text and I could read
Disabling non-boot CPUs
Stoppings Tasks
But then again I returned to my Desktop.
cat /var/log/suspend2ram.log
suspend2ram initiated: 2007-03-15 10:03:52 AM
Debug info follows here, please include in your bug reports. Thanks.
Loaded modules:
Module Size Used by
forcedeth 40200 0
ipv6 252480 10
it87 16784 0
hwmon_vid 3072 1 it87
eeprom 5904 0
i2c_isa 4096 1 it87
usbhid 34592 0
hid 25088 1 usbhid
snd_bt87x 12004 1
bt878 9208 0
ff_memless 5256 1 usbhid
rtc 10416 0
ppp_generic 23444 0
slhc 6272 1 ppp_generic
snd_mpu401 6376 0
snd_mpu401_uart 7040 1 snd_mpu401
shpchp 29588 0
ehci_hcd 30092 0
pci_hotplug 27976 1 shpchp
nvidia_agp 6556 1
agpgart 26200 1 nvidia_agp
pcspkr 2816 0
i2c_nforce2 5120 0
ohci_hcd 18948 0
tsdev 6336 0
evdev 8192 4
joydev 8384 0
sidewinder 11264 0
emu10k1_gp 3200 0
gameport 11784 3 sidewinder,emu10k1_gp
cx8800 29324 0
cx88xx 60452 1 cx8800
tuner 59816 0
tvaudio 21788 0
msp3400 28960 0
bttv 166004 2 bt878
video_buf 20356 3 cx8800,cx88xx,bttv
ir_common 26628 2 cx88xx,bttv
compat_ioctl32 1536 2 cx8800,bttv
i2c_algo_bit 7304 2 cx88xx,bttv
btcx_risc 4360 3 cx8800,cx88xx,bttv
tveeprom 13840 2 cx88xx,bttv
videodev 25216 3 cx8800,cx88xx,bttv
v4l2_common 22656 5 cx8800,tuner,msp3400,bttv,videodev
v4l1_compat 13956 2 cx8800,videodev
lirc_i2c 8964 2
i2c_core 17792 12 it87,eeprom,i2c_isa,i2c_nforce2,cx88xx,tuner,tvaudio,msp3400,bttv,i2c_algo_bit,tveeprom,lirc_i2c
lirc_dev 12532 1 lirc_i2c
capability 3592 0
commoncap 5632 1 capability
snd_seq_oss 29184 0
snd_seq_midi_event 6528 1 snd_seq_oss
snd_seq 46672 4 snd_seq_oss,snd_seq_midi_event
snd_pcm_oss 39072 0
snd_mixer_oss 14464 1 snd_pcm_oss
snd_intel8x0 28828 1
snd_emu10k1 112448 3
snd_rawmidi 19104 2 snd_mpu401_uart,snd_emu10k1
snd_ac97_codec 91940 2 snd_intel8x0,snd_emu10k1
ac97_bus 2432 1 snd_ac97_codec
snd_pcm 68484 6 snd_bt87x,snd_pcm_oss,snd_intel8x0,snd_emu10k1,snd_ac97_codec
snd_seq_device 6796 4 snd_seq_oss,snd_seq,snd_emu10k1,snd_rawmidi
snd_timer 18820 3 snd_seq,snd_emu10k1,snd_pcm
snd_page_alloc 7816 4 snd_bt87x,snd_intel8x0,snd_emu10k1,snd_pcm
snd_util_mem 3840 1 snd_emu10k1
snd_hwdep 7044 1 snd_emu10k1
snd 43492 24 snd_bt87x,snd_mpu401,snd_mpu401_uart,snd_seq_oss,snd_seq,snd_pcm_oss,snd_mixer_oss,snd_intel8x0,snd_emu10k1,snd_rawmidi,snd_ac97_codec,snd_pcm,snd_seq_device,snd_timer,snd_hwdep
soundcore 6496 1 snd
usbcore 115464 4 usbhid,ehci_hcd,ohci_hcd
ext3 119688 3
jbd 55336 1 ext3
mbcache 7044 1 ext3
ide_cd 35744 0
cdrom 34464 1 ide_cd
ide_disk 13312 5
amd74xx 13852 0 [permanent]
generic 4740 0 [permanent]
ide_core 108616 4 ide_cd,ide_disk,amd74xx,generic
sata_nv 14980 0
libata 94100 1 sata_nv
Memory info:
total used free shared buffers cached
Mem: 775600 675048 100552 0 44228 313144
-/+ buffers/cache: 317676 457924
Swap: 1004020 0 1004020
/proc/cmdline: root=/dev/hdb8 acpi_sleep=s3_bios ro vga=773
========we are going to sleep, preparing.========
== checking runlevel ==
no shutdown/reboot in progress, good.
== Unmounting FAT/NTFS filesystems: ==
none found in /etc/mtab
== FAT/NTFS filesystems unmounted ==
Stopping services: ('netfs network cups alsa' configured)
stopping netfs:
## stty: standard input: Inappropriate ioctl for device
## :: Unmounting Network Filesystems 9G [BUSY] 9G [DONE]
stopping network:
## stty: standard input: Inappropriate ioctl for device
## stty: standard input: Inappropriate ioctl for device
## :: Stopping Network 9G [BUSY] 9G [DONE]
stopping cups:
## stty: standard input: Inappropriate ioctl for device
## :: Stopping CUPS Daemon 9G [BUSY] 9G [DONE]
ejecting PCMCIA cards...
Unloading modules: ('prism54 ' configured)
checking prism54
prepare_sleep finished for suspend2ram
/usr/sbin/s2ram not found, falling back to echo.
==== finished, return code 11 ====
========we are back from suspend, cleaning up.========
== restore_after_sleep: restart and reload everything ==
Resuming:
switched back to console: ' 7'
reactivating ACPI fan FAN
Reloading modules:
inserting PCMCIA cards...
Restarting services:
starting cups:
## stty: standard input: Inappropriate ioctl for device
## :: Starting CUPS Daemon 9G [BUSY] 9G [DONE]
starting network:
## stty: standard input: Inappropriate ioctl for device
## :: Starting Network 9G [BUSY] 9G [DONE]
starting netfs:
## stty: standard input: Inappropriate ioctl for device
## :: Mounting Network Filesystems 9G [BUSY] 9G [DONE]
Remounting filesystems:
not necessary.
======================================
restore_after_suspend_to_ram: finished
Btw after installing powersave I get an
Enabling non-boot CPUs
when "echo -n "mem > /sys/power/state".
And the hibernate-script crashed at the vbetool-line, leaving me with a black screen.
But I don't think thats the main problem, because my machine even don't goes to the S3-sleep.dystoptic wrote:Shows mem and disk.
Do you use the proprietary ati driver or the xorg implementation?
Edit: Seems to be the free one, right? With my ati card i had a lot of struggle in connection with suspend to ram(with the free and the proprietary driver), i don't remember how i solved it, but finally it worked one time...
Last edited by buddabrod (2007-03-19 00:40:24) -
Neither does it work to browse forwards or backwards with the double gesture. Zooming in and out works fine though.
Everything still works in IE8 and in Google Chrome.
The touch-pad uses an ALPS-driver.Thanks, I don't have the file tp4table.dat on my computer. Currently I've reversed to 3.6 and will run it as long as it works. Really don't like 4.0 anyway... May be forced to use IE again if I don´t find anything better. Tried Chrome and worked well at first but now back and forth doesn't work there either and that's so annoying.
-
Game Center doesn't work correctly
Game Center on iPod Touch 2nd Gen doesn't work correctly under iOS 4.2.1
It shows wrong language (Englist but not my native language. My region setting is right and the system language right too.)
Besides, the "Games" page only has a button "Find Game Center Games", while it should show my Game Center Games.
The Friends page shows all my friends. But when I press a friend the sub page doesn't show the game my friend and I have in common.
I've restored my device several times, but it didn't help.
How to solve it?I've had exactly the same problem on my 2nd gen since early May when it just stopped working out of the blue.
There are a few threads here on the subject. I believe that every 2nd gen is affected as I've yet to hear a 2nd gen owner say that theirs works.
Other than waiting for Apple to fix it I don't think there is a solution. -
Hi. I would like to ask for your advice. I have problem with suspend to ram. In order to have nvidia drivers i had to install newest kernel, 3.12.xx. I found that suspend to ram doesen't work. I put my computer in sleep mode by typing
sudo systemctl suspend
, everything works, computer goes in sleep mode but after resume from it, after wake up i have only black screen with unblinking cursor on the left upper corner of screen. I can't kill x, can't do anything in tty, only hard reset.
I removed nvidia drivers in order to check older kernel, and found that with nouveau drivers kernel 3.9 works, i can suspend and resume. I did another thing. I installed clean Arch, updated it with pacman -Syu, and installed nvidia drivers - the same problem with resuming from suspend. So on fresh and updated system i removed nvidia again, installed old kernel with nouveau - suspend works with resume.
Could somebody help me? Maybe you can point me to a solution? I would like to have nvidia drivers installed and working suspend with resume from suspend to ram.
I checked pm-suspend.log:
http://pastebin.archlinux.fr/478611
I don't see anything wrong here. I asked on polish site about kernel 3.12, and with Ubuntu they said it works. Why on Arch only kernel 3.9 works with resuming from suspend to ram and olny when there are no nvidia drivers (because they need new kernel, i could even use old but i'm not so exprienced to compile kernel myself, won't do that, and with downgrade script from AUR i didn't found nvidia driver for older kernels. There are old kernel, even 3.0.xx but only nvidia drivers from 325 that they need 3.12 kernel).
My spec is AMD X4 955, NVIDIA GTX260, 4GB ram. Arch is x32, kernel 3.12.5.1 (other don't work with resume too, only 3.9 with nouveau).
Last edited by firekage (2013-12-22 12:33:45)I will try it, but i don't think that this "fix" will really help me - i installed newest driver, installed binary driver from nvidia website on kernel 3.9.8.1 and resuming from suspend to ram works. With newer kernel it just doesen't so if this would be a nvidia MSI problem than i would have it also on kernel 3.9.8.1 where i installed newest drivers ( i installed binary because i don't know which package from aur would work with this kernel, and on aur thare are only drivers from 325, no older).
Edit - just as i said. Doesen't work. It is not related to nvidia because it happens on nouveau. It is kernel fault.
Last edited by firekage (2013-12-25 02:25:34) -
AddChild doesn't work correctly in 11.9
comparing the two releases listed below, somehow my Flash program doesn't work correctly on the latest version anymore, nothing was changed in my program but after upgrading to the latest Flash Player, it doesn't work properly anymore, specifically, the items I add through the addChild method doesn't appear properly, was there any changes in between these versions that could have affected the addChild behavior? I'm testing with Windows 7 IE debug version and I see no script errors
Released 10/8/2013) Flash Player 11.9.900.117 (156.2 MB)
(Released 9/24/2013) Flash Player 11.8.800.175 (Win IE only) (50 MB)Could you please open a new bug report on this over at bugbase.adobe.com? When adding the bug, please include sample code, test url or a test swf so we can quickly test this out internally. If you'd like to keep this private, feel free to email the attachment to me directly ([email protected]).
Once added, please post back with the bug URL and I'll investigate internally.
-
IPhoto doesn`t work correctly with german "umlaut" (ä,ö,ü) in keywords
iPhoto doesn`t work correctly with german "umlaut" (ä,ö,ü) in keywords. They get to ä̈,ö̈, ü̈ when I write the keyword a second time. Can anybody tell me why. Thank you. Heinz
It apparently does not like non-standard English characters - use A-Z and 0-9 adn you should be OK
report to Apple - iPhoto menu ==> provide iPhoto feedback
LN -
After upgrade my iphone 4 to IOS6, sound doesn't work correctly
After upgrade my iphone 4 to IOS6, sound doesn't work correctly.
During a phone call, there is no sound. But if I turn on the speaker, there is sound. itune works fine since it's on the speaker.Dear All
i have done the same activity ( buy a new iphone 4 -> upgrade to ios5 - > configure email) with success-
than when i start to move the contacts from old mobile to iphone (using the microsim) i receive the same crash
in disgnosis e use i saw 2 dump with this title 'latestCrash-Preferences.plist and LatestCrash.plist. in each file the date is the same and i read:
Exception Tyle: EXC_CRASH (SIGABRT)
Exception code: 0x00000000, 0x00000000
Chrashed Thread: 6
in thread 6: name: Dispatch queue:
com.apple.addressBookUI.ContactsSettingPlugin
and thaan a lot of data.
Have you any idea?
thank in advance
Fabio -
Translation from CS5 to Cloud doesn't work correct, navi and linked images are broken.
Translation from CS5 to Cloud doesn't work correct, <navi> and linked images are broken.
The data of CS5 was created at another PC. I installed Cloud version into two different PC. One has had the site data since dreamweaver CS5 and it works correct in Cloud version. Another PC got the site data from remote server and it doesn't work correct. <navi> and linked image are broken.Another PC got the site data from remote server and it doesn't work correct. <navi> and linked image are broken.
This implies your site is not properly defined in DW. Go to Site > Manage Sites.
Or simply go to your other installation of DW and export the site definition file from Manage Sites.
Save it to a flash stick or other removable drive. Then import the STE file into your 2nd installation of DW.
Nancy O. -
ITunes 10.4 full screen with Win7-64bit doesn't work correctly.
iTunes 10.4 full screen with Win7-64 doesn't work correctly. I have the Windows taskbar on the left side of my screen. Maximized iTunes is panned to the left.
Same issue here. When the Windows taskbar is position on the top of the screen and then the iTunes windows is maximised, it's position is as if the Windows taskbar is at the bottom of the screen so the top of the iTunes window sits under the taskbar.
For those wanting a workaround, hold shift and right click the iTunes icon in the taskbar/quick launch bar and click restore, at least then you can adjust it to be full screen manually.
System:
Windows 7 Ultimate x64
iTunes 10.4
ATI 5750 video card -
Revision: 4028
Author: [email protected]
Date: 2008-11-06 09:04:26 -0800 (Thu, 06 Nov 2008)
Log Message:
Bug: Draining of buffered messages doesn't work correctly with long-polling.
QA: Yes - please make sure both nio and regular long-polling channels work with throttling.
Doc: No
Checkintests: Pass.
Details: Made sure that buffered messages are drained properly with all polling channels (polling, long-polling, and nio-long-polling).
Modified Paths:
blazeds/trunk/modules/core/src/flex/messaging/client/FlexClient.javaSounds like you've probably already looked but the CUPS article in the wiki led me through setting up a printer without any problems. http://wiki.archlinux.org/index.php/CUPS
The first section describes how to troubleshoot CUPS and printing problems.
I've also found a few other posts and links that may help.
http://hplipopensource.com/hplip-web/mo … eries.html
http://ubuntuforums.org/showthread.php?t=419163
Hope this helps! -
how can I avoid duplicates on contacts and how do I get contacts created on iPhone/ipad synchronized on my mac? so far it doesn't work correctly, just sometimes. same for icalendar
On your Mac, for duplicates, switching Contacts off then back on in System Preferences > iCloud may prevent duplicates.
On the iPhone / iPad tap Settings > iCloud. Make sure Contacts and Calendars are swtiched on.
Try restarting your Mac and your iOS devices when items won't sync as they should.
To restart an iOS device: Hold the On/Off Sleep/Wake button down until the red slider appears. Slide your finger across the slider to turn off iPhone. To turn iPhone back on, press and hold the On/Off Sleep/Wake button until the Apple logo appears.
Maybe you are looking for
-
Are we really vulnerable for plugins?
Are we really vulnerable... or is the admonition to perform updates a catchall for out-of-date plugins? What I mean is, do these plugins really miss a new vulnerability every other week, or is the term "vulnerable" used to mean that there is a newer
-
User Defined Fields & Tables Problem
After the upgrade to B1 2007 and converting our database to 2005 compatibility as per the upgrade directions, were having some weird issues with our user defined fields and tables. Our user defined fields that used to be alpha-numeric when se
-
How to modify a code of a RFC Server Program
Hello, In order to connect a BI System to a new ECC System, I need to modify a RFC Server Program. Please can you tell how can I modify this program? Thanks
-
How do I a full database impoert?
Could somebody help me? I have a database (OraEE 8.1.6 WinNT), SID=DB01 and I have a full export database dump, it was made like this: EXP system/<pw> file=MY.DMP full=Y I would like to make a same database in an other instance (SID=DB02). I have sta
-
User exit for invoice cockpit (tcode /cockpit/1)
Hi everybady, Could you please hepl us on this issue. I need to add a check when updating invoice cocpit document (via tcode /cockpit/1), i used exit FM via tcode /cockpit/C1 but nothing hapened. Any replay will be appreciated. Thanks. Toubkal