[solved] Unresolvable dependencies, system won't update

Trying to update, haven't done it in about two weeks. There's a new version of pacman, and when I attempt to install it it says :
resolving dependencies...
looking for inter-conflicts...
:: gcc-libs and gcc-libs-multilib are in conflict. Remove gcc-libs-multilib? [y/N]
If I say yes, it goes on to do that :
error: failed to prepare transaction (could not satisfy dependencies)
:: gcc-multilib: requires gcc-libs-multilib=4.6.2-7
If I say no, it does this instead :
error: failed to prepare transaction (conflicting dependencies)
:: gcc-libs and gcc-libs-multilib are in conflict
After trying to remove it I realized that gcc-libs was not yet installed on my machine. So I gather it's the newer version and is supposed to replace gcc-libs-multilib. Attempting to remove gcc-libs-multilib manually gives conflicts with pretty much my entire system (the list of conflicting packages is longer than a full-screened terminal). Attempting to remove gcc-multilib gives conflicts with libreoffice-sdk and libtool. However, attempting to remove these two packages throws up a long list of conflicting packages as well. What to do? Force the update?
Last edited by bolshevik (2012-02-20 01:30:11)

Please search before posting
https://bbs.archlinux.org/viewtopic.php?id=131608

Similar Messages

  • [SOLVED] Unresolvable dependencies: gambas3-examples

    I am trying to get my package updates using pacman, but unfortunately there seems to be a problem with some of the gambas3 packages:
    [hamish@Griffindor ~]$ su -
    Password:
    [root@Griffindor ~]# pacman -Syu
    :: Synchronizing package databases...
    core is up to date 0.0 B 0.00B/s 00:00 [----------------------] 0%
    extra is up to date 0.0 B 0.00B/s 00:00 [----------------------] 0%
    community is up to date 0.0 B 0.00B/s 00:00 [----------------------] 0%
    :: Starting full system upgrade...
    :: Replace khrplatform-devel with extra/mesa? [Y/n] Y
    :: Replace libegl with extra/mesa? [Y/n] Y
    :: Replace libgbm with extra/mesa? [Y/n] Y
    :: Replace libgl with extra/mesa-libgl? [Y/n] Y
    :: Replace libglapi with extra/mesa? [Y/n] Y
    resolving dependencies...
    warning: cannot resolve "gambas3-gb-imageio", a dependency of "gambas3-gb-map"
    :: The following package cannot be upgraded due to unresolvable dependencies:
    gambas3-examples
    Do you want to skip the above package for this upgrade? [y/N] N
    error: failed to prepare transaction (unexpected error)
    [root@Griffindor ~]#
    Any suggestions?
    Last edited by Hamish (2013-03-02 09:11:45)

    I've had less luck; it closed my bug report; probably because i was not so good in explaining my reasons
    Anyway he fixed other problems too, but other remains:
    https://bugs.archlinux.org/task/34107
    edit:
    Could you confirm?
    Last edited by kokoko3k (2013-03-02 17:12:30)

  • System Won't Update, Once Again

    [ ~ ] ➤ pcsys [ ]
    :: Synchronizing package databases...
    core is up to date
    extra is up to date
    community is up to date
    :: Starting full system upgrade...
    resolving dependencies...
    looking for inter-conflicts...
    Targets (17): cifs-utils-5.8-1 gmp-5.1.0-1 gst-plugins-base-libs-1.0.4-1 gstreamer-1.0.4-1 ibus-pinyin-1.5.0-2 krb5-1.11-1
    libmysqlclient-5.5.29-1 libreoffice-common-3.6.4-2 libreoffice-draw-3.6.4-2 libreoffice-en-US-3.6.4-2 libreoffice-impress-3.6.4-2
    libreoffice-writer-3.6.4-2 libwbclient-3.6.10-1 mysql-5.5.29-1 mysql-clients-5.5.29-1 smbclient-3.6.10-1 sqlite-3.7.15.1-1
    Total Installed Size: 476.73 MiB
    Net Upgrade Size: 64.48 MiB
    Proceed with installation? [Y/n] y
    (17/17) checking package integrity [####################################################] 100%
    (17/17) loading package files [####################################################] 100%
    (17/17) checking for file conflicts [####################################################] 100%
    error: failed to commit transaction (conflicting files)
    smbclient: /usr/bin/net exists in filesystem
    smbclient: /usr/bin/nmblookup exists in filesystem
    smbclient: /usr/bin/rpcclient exists in filesystem
    smbclient: /usr/bin/smbcacls exists in filesystem
    smbclient: /usr/bin/smbclient exists in filesystem
    smbclient: /usr/bin/smbcquotas exists in filesystem
    smbclient: /usr/bin/smbget exists in filesystem
    smbclient: /usr/bin/smbspool exists in filesystem
    smbclient: /usr/bin/smbtar exists in filesystem
    smbclient: /usr/bin/smbtree exists in filesystem
    smbclient: /usr/include/libsmbclient.h exists in filesystem
    smbclient: /usr/include/netapi.h exists in filesystem
    smbclient: /usr/lib/cups/backend/smb exists in filesystem
    smbclient: /usr/lib/libnetapi.so exists in filesystem
    smbclient: /usr/lib/libnetapi.so.0 exists in filesystem
    smbclient: /usr/lib/libsmbclient.so exists in filesystem
    smbclient: /usr/lib/libsmbclient.so.0 exists in filesystem
    smbclient: /usr/share/man/man1/nmblookup.1.gz exists in filesystem
    smbclient: /usr/share/man/man1/rpcclient.1.gz exists in filesystem
    smbclient: /usr/share/man/man1/smbcacls.1.gz exists in filesystem
    smbclient: /usr/share/man/man1/smbclient.1.gz exists in filesystem
    smbclient: /usr/share/man/man1/smbcquotas.1.gz exists in filesystem
    smbclient: /usr/share/man/man1/smbget.1.gz exists in filesystem
    smbclient: /usr/share/man/man1/smbtar.1.gz exists in filesystem
    smbclient: /usr/share/man/man1/smbtree.1.gz exists in filesystem
    smbclient: /usr/share/man/man7/libsmbclient.7.gz exists in filesystem
    Errors occurred, no packages were upgraded.

    Read the wiki, once again: https://wiki.archlinux.org/index.php/Pa … stem.22.21
    Or search the forum: https://bbs.archlinux.org/viewtopic.php?id=56373
    Last edited by 2ManyDogs (2012-12-21 13:24:18)

  • PB G4 with 10.4.5 - Safari only shows some images and system won't update..

    Hi,
    I really hope you can help me with some good ideas on how to fix this problem.
    A PowerBook G4 running 10.4.5.
    Suddely Safari stopped showing some of the images on webpages (only white instead). I deleted the Safari preferences, did a reset to default of Safari and even created a new user to test Safari - same result.
    As the machine is running 10.4.5 I startede Software update to update to 10.4.6 as I was hoping this could take care of the strange problem. When trying to update the Software update gets halv way in the status bare and just hangs in the same spot.
    I then downloaded the 10.4.6 combo updater from Apple.com. When I start the update program I get to the screen where I have to choose a disk to install onto - the only problem is that there are no disk icons !
    I have tried doing a fsck -yf on the disk and I have also fixed the permissions - still I get the same result when trying to run the combo updater.
    Please help - any good suggestions to fix this problem would be greatly appreciated !
    Cheers,
    Finn

    Give this a try:
    Boot from your Tiger DVD. After the installer loads select Disk Utility from the Utilities menu. After DU loads select your OS X volume from the list on the left, click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now shutdown the computer for a couple of minutes and then restart normally.
    If DU reports errors it cannot fix, then you will need Disk Warrior (3.0.3 for Tiger) and/or TechTool Pro (4.1.1 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

  • [Solved] pacman won't update kernel

    Hi, I create a base image that I clone to build from, it has nothing added but 'base-devel', earlier I installed an XFCE install, I went to create another from the same base image, when I install nvidia it told me in both cases that it needed a newer kernel 3.1.4, so I ran
    pacman -Syu
    . This morning this solves the problem, right now it states that it has nothing to update (it's made from the same image) and nvidia won't install stating it needs that upgrade. I shuffled mirrors around to see if it helped but it didn't. Anyone have an idea of why this is occurring?
    thanks in advance for your help.
    --jerry
    Last edited by jk121960 (2011-12-10 23:12:11)

    No, it doesn't do the upgrade, it insists there is nothing to upgrade, while the nvidia install says that there is.
    pacman -S nvidia nvidia-utils extra/opencl-nvidia
    warning: nvidia-utils-290.10-1 is up to date -- reinstalling
    warning: opencl-nvidia-290.10-1 is up to date -- reinstalling
    resolving dependencies...
    warning: cannot resolve "linux>=3.1", a dependency of "nvidia"
    :: The following package cannot be upgraded due to unresolvable dependencies:
    nvidia
    Do you want to skip the above package for this upgrade? [y/N] n
    error: failed to prepare transaction (could not satisfy dependencies)
    :: nvidia: requires linux>=3.1
    thanks
    --jerry
    pacman -Syu
    :: Synchronizing package databases...
    --2011-12-10 12:27:58-- ftp://ftp.jaist.ac.jp/pub/Linux/ArchLinux/core/os/x86_64/core.db
    => `core.db'
    Resolving ftp.jaist.ac.jp... 150.65.7.130, 2001:200:141:feed::feed
    Connecting to ftp.jaist.ac.jp|150.65.7.130|:21... connected.
    Logging in as anonymous ... Logged in!
    ==> SYST ... done. ==> PWD ... done.
    ==> TYPE I ... done. ==> CWD (1) /pub/Linux/ArchLinux/core/os/x86_64 ... done.
    ==> SIZE core.db ... 104184
    File has already been retrieved.
    2011-12-10 12:28:00 (0.00 B/s) - `core.db' saved [104184]
    --2011-12-10 12:28:00-- ftp://ftp.jaist.ac.jp/pub/Linux/ArchLinux/extra/os/x86_64/extra.db
    => `extra.db'
    Resolving ftp.jaist.ac.jp... 150.65.7.130, 2001:200:141:feed::feed
    Connecting to ftp.jaist.ac.jp|150.65.7.130|:21... connected.
    Logging in as anonymous ... Logged in!
    ==> SYST ... done. ==> PWD ... done.
    ==> TYPE I ... done. ==> CWD (1) /pub/Linux/ArchLinux/extra/os/x86_64 ... done.
    ==> SIZE extra.db ... 1178838
    File has already been retrieved.
    2011-12-10 12:28:03 (0.00 B/s) - `extra.db' saved [1178838]
    --2011-12-10 12:28:03-- ftp://ftp.jaist.ac.jp/pub/Linux/ArchLinux/community/os/x86_64/community.db
    => `community.db'
    Resolving ftp.jaist.ac.jp... 150.65.7.130, 2001:200:141:feed::feed
    Connecting to ftp.jaist.ac.jp|150.65.7.130|:21... connected.
    Logging in as anonymous ... Logged in!
    ==> SYST ... done. ==> PWD ... done.
    ==> TYPE I ... done. ==> CWD (1) /pub/Linux/ArchLinux/community/os/x86_64 ... done.
    ==> SIZE community.db ... 972101
    ==> PASV ... done. ==> REST 972243 ... done.
    ==> RETR community.db ... done.
    Length: 972101 (949K), -142 remaining (unauthoritative)
    100%[+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++] 972,243 --.-K/s in 0s
    2011-12-10 12:28:06 (0.00 B/s) - `community.db' saved [972243]
    :: Starting full system upgrade...
    there is nothing to do
    here is the pacman output.
    Last edited by jk121960 (2011-12-10 19:19:46)

  • Mac won't update software or access iTunes shop. Message comes up with 'not connected to the net. Check connections' error. I still have internet access. Changed my Apple ID but no result. Repaired permissions and re-installed operating system.

    Mac won't update software or access iTunes shop. Message comes up with 'not connected to the net. Check connections' error. I still have internet access. Changed my Apple ID but no result. Repaired permissions and re-installed operating system.

    It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
    First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
    http://www.adwaremedic.com/kb/baddns.php
    http://www.adwaremedic.com/kb/hackedrouter.php
    If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
    As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
    (Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

  • I updated Efi firmware, but force quit twitter to install. Now system won't come on, it just shows grey screen with the spinning wheel loading. I am running lion 10.7.3

    I updated Efi firmware, but force quit twitter to install. Now system won't come on, it just shows grey screen with the spinning wheel loading. I am running lion 10.7.3.
    Thank you

    The following support article is somewhat outdated. Where it refers to booting from an installation disc, you should boot from your recovery partition (if running 10.7 or later) by holding down the key combination command-R at the chime.
    Mac OS X: Gray screen appears during startup

  • [Solved] Severely broken system after update

    I need help with system that doesn't boot after update.
    I tried to make pacman -Syu on a system which was not updated since 2010 xmass... probably being overwhelmed by number of issues I did something wrong, but now the system is in a very bad state.
    I think that the main issue was glibc update. I followed the instruction to install all other packages before glibc, but every second package was complaining about glibc (although they all updated). Then pacman became broken, but I solved this and finally everything got updated.
    Everything looked fine right after update, but now the system is "unable to find root device" on boot.
    I tried to boot with recent arch usb stick (cd drive is broken in the computer), but it doesn't boot (reboots right after "loading archiso.img"). I managed to boot with ubuntu usb stick. I chrooted to my arch partition using these instructions:
    https://wiki.archlinux.org/index.php/Chroot#Change_root
    then, following pacman wiki I reinstalled linux, mkinitcpio and systemd.
    It didn't help. The last thing I can think of is to reinstall all packages via chroot. Is there any handy way to do this, taking into account that some packages could have been installed from AUR (I don't care about them at this point, but I wouldn't like this to stop me from reinstalling all other packages)?
    Any other ideas?
    Last edited by senjin (2012-09-15 19:34:26)

    It's not a solution since arch installation usb stick doesn't work for me, as I mentioned above. I must either make this installation work, or move to ubuntu (gah!)
    edit:
    I managed to boot. After the error message at the beginning I'm left with "you can type exit to continue booting, but it will most likely fail"... it doesn't fail, and system appears to be working normally (well, except some error about consolekit when X is starting, probably unrelated).
    Now the question is how to avoid this error message at the beginning...
    Last edited by senjin (2012-09-15 13:04:04)

  • [SOLVED] Switch to systemd - Now system won't boot

    I saw that todays update upgrade included the installation of systemd. I looked the wiki and did the necessary changes (I already had made the /etc/hostname etc. files). So I added the
    init=/bin/systemd
    line to grub and now my system won't boot. I get an error saying something about syslog service not enabled and then a black screen. I can boot my machine fine without the "init=/bin/systemd" line but I want to run a pure systemd system since Arch is moving to it anyway. In the wiki it mentions to install systemd-sysvcompat but it conflicts with initscripts it says. What am I doing wrong or missing?
    Last edited by fettouhi (2013-12-08 14:42:04)

    fettouhi wrote:
    Thanks for the clarification about the DAEMONS list. My DAEMONS list is:
    DAEMONS=(!hwclock ntpd syslog-ng !network netfs crond @alsa dbus networkmanager ufw cupsd avahi-daemon samba)
    when I try to enable alsa and dbus I get this
    [root@andre ~]# systemctl enable alsa-store.service
    The unit files have no [Install] section. They are not meant to be enabled using systemctl.
    [root@andre ~]# systemctl enable alsa-restore.service
    The unit files have no [Install] section. They are not meant to be enabled using systemctl.
    [root@andre ~]# systemctl enable dbus.service
    The unit files have no [Install] section. They are not meant to be enabled using systemctl.
    Is LVM handled automatically by systemd? The reason I ask is because I have the USELVM= set to YES in rc.conf.
    I made the permanent transition to systemd and did not start alsa at all - sound works fine - so I never bothered with the alsa-store/alsa-restore service files at all - it just works! Also dbus gets handled by default in systemd so you don't need any starting of dbus service at all... it just works.

  • Why won't my system won't suut down after software update?

    why won't my system won't suut down after software update?

    That's an annoying issue. Disconnect all USB devices such as Pen drives and external HDDs before doing the update.

  • Updating error 49.  recommended  solution was to retry...have tried and retried ... now system won't even attempt.   any HELP out there ???

    what to do when system won't even retry??

    Hi Robert,
    Are you running Windows Pro 8 N? If so, you may not have certain components required for Premiere Pro. To download them, please check out this document: Download Media Feature Pack for N and KN versions of Windows 8 from Official Microsoft Download Center
    Let us know if that worked for you.
    Thanks,
    Kevin

  • P35 platinum ms7345, system won't load OS, stops at msi splash screen

    motherboard in question is a p35 platinum ms7345
    system won't load the OS, stops at msi splash screen, can't get into bios.
    LED code stops at G-R-G-R "Testing Base and  Extended Memory"
    this is a system that I built over 8 months ago. the only thing I
    did was upgrade the cpu to a E8400( from a e6750). I had no previous
    problems. but after the upgrade. I first received an error
    = attempt to overclock failed = ( cant quote but as I remembered it)
     press any button to reset bios.( I have received this message before with the old cpu but with a restart the system went on as normal). After the system restart, it just sits on the splash screen. I never attempted
    to overclock the memory. the jb1 & jb2 jumpers are on 1 & 2 pins(same way it
    came from newegg). I tried to use different memory( in all of the slots) same outcome.
    I unplugged
    all other hardware except vid card> same outcome. I even used a different
    vid card> same outcome.
    system specs
    core 2 e8400
    msi p35 platnum
    2gb(2x1gb) adata ddr2 800
    any suggestions? I appreciate any help. I hope the board isn't   finished
    thanks in advance
    NFIXIT

    There are three possible solutions to solve the situation:
    1) Install a processor supported by the current BIOS Version to be able to properly turn on your system and then update the BIOS to the latest Version to be able to use your E8400/E0 (update should be done from DOS only).
    2) Ask in a local computer shop or contact your reseller to do the same thing for you.
    3) Connect an internal floppy drive and a PS/2 Keyboard and then try to force the system into AMI BIOS Recovery Mode.  Instructions:
    Quote
    Rename the desired AMI BIOS file to AMIBOOT.ROM and save it on a floppy disk. e.g. Rename A7345IMS.1xx to AMIBOOT.ROM
    Insert this floppy disk in the floppy drive. Turn On the system and press and hold Ctrl-Home to force update. It will read the AMIBOOT.ROM file and recover the BIOS from the A drive.
    When 4 beeps are heard you may remove the floppy disk and restart the computer.
    Even though the AMI BIOS Recovery Procedure is the only chance you have to solve the situation without installing a different processor, it does not work in all cases.  However, as it is an easy procedure, it is at least worth a try.

  • ICal won't update published calendar

    I have a published calendar on .Mac and when I update in iCal, it won't update on my .Mac account. Also it shows that the published date is Dec 31, 1969. I have checked my date and time on system preferences. I have deleted and recreated this calendar, and it has not solved the problem. I have even unpublished and published several times, all to no avail. I have iCal 2.0.2 installed. Anyonw else come across this problem?
    Thanks.

    When you publish, is "Publish changes automatically" checked? This would explain why updates don't happen. Also in .Mac system preferences under the "Sync" tab, there is a choice of how often to sync. Even if this is set to "Automatically" the sync isn't instant. Check this setting. I don't know if it affects published calendars or not, but worth checking nonetheless.
    I wonder if in the Date and Time system preference ("Date & Time" tab) you have "Set date & time automatically" Checked?
    Mine publish fine, no problem: http://ical.mac.com/dancingbrook/Social
    Still no solution for web To Dos though perhaps via a webDAV server? Try:
    http://www.icalx.com/
    Also, can I assume you've tried trashing your ical preferences? ~/Library/Preerences/com.apple.iCal.plist

  • Certain apps won't update or download on any device.

    I've searched for two weeks to no avail. I've seen similar problems posted but nothing quite like this. I have an iPhone 5s iOS 8.2, a 4th Gen iPad iOS 8.2 and Mac Mini Late 2014 OS X Yosemite 10.10.2. It all started with wanted to download the Pages app. My iPad is old enough it wouldn't let me download it for free so I initiated the download on my iPhone and then promptly cancelled. I then tried to download Pages from "the cloud" onto my iPad. It downloaded 3/4 of the way and failed stated that the app could not be downloaded at this time with two options to continue: done and retry. And now there are a handful of apps that will fail somewhere in the download and some apps that are already installed on the devices that won't update. Any app that has previously failed WILL download over cellular network on the iPhone 5s. I've tried four separate location with WIFI access and these same apps will not download. I've cleared network statistics, restored the iPhone to factory defaults, changed Apple ID password, tried a different Apple ID, and trying to download apps on Mac Mini to sync to iPhone/iPad over tethered connection. The only partial fix I have discovered is to start download over cellular network and switch to WIFI download. Please... any ideas. I feel I may have left out some steps I might have taken so please feel free to ask any questions.

    I had this problem and solved it by going to Settings > General > Reset > Reset All Settings.
    Note: This will not delete any apps, songs, videos, or podcasts from your phone. It will only reset your wallpapers, brightness, bluetooth, contact sorting, network preferences (still remembers networks though), etc.  It's a bit annoying to go update all these back to how yo like, but much less annoying than a full restore.
    DO NOT press Erase All Content and Settings. This will delete everything and you'll have to restore from iTunes.

  • IMac display issues: black icons and folders, doubled up files in finder windows, programs won't update

    HELP!
    I'm hoping someone can help with my iMac 27" purchased in 2010.  From a previous discussion I started a year ago, I have had virtually nothing but trouble with it.  After the internal hard drive crashing, I was able to install OS X on an external drive and used it for a good 8 months to drive my iMac and I took it to an expert who has replaced it with a 3tb HDD, but at some point the display has gone crazy.  I am not certain if it is hardware, i.e. graphics card or video but I'll describe the symptoms and add some pics to see if anyone has seen this before and knows what the problem may be.
    1.     90% of the screen was covered with white with just a portion of the desktop showing through.
            (This happened when I tried to reinstall OS X on the old HDD and the new one, but didn't happen when using OS X install disc)
    2.     Files, folders, photos and some icons on the dock go black
    3.     Files and photos double up when in Finder.  When I'm viewing photos, it shows them but all the previous panes and the photos are jumbled behind the
            photos.
    4.     Anything I open in Preview is completely black, but ColourSync Utility opens everything fine.
    5.     Programs won't update.  They will download onto my iMac but won't update.  Some say, because I don't have OS X 10.6.8 others just won't open.
            Including Google Chrome, opens with two tabs open but when I open a third tab the rainbow wheel just turns.  Skype won't open just gives a failure
            report.
    6.     10.6.8 Update Combo downloads but when I restart the screen is covered in white - as in 1. and I have to reinstall OS X 10.6.2 to get the screen to               clear but then all the above problems continue.
    7.     Sometimes videos don't display in Youtube, or the entire page other than the video player is covered in rainbow lines.
    8.     Some buttons are blacked out on selection pages, i.e. system preferences, or saving screens
    9.     Photos opened in FB go upside down and flicker all over the page as my mouse runs over them.
    10.   Photos won't upload into internet editing programs.
    I can't find anyone who has had the same issue in all of the discussions I've looked at, but it sounds like I have a video problem, but I wondered if it might be a software problem with flash or something.  Or I have something malicious on my computer.
    I also have an iphone 5 that faulted with the iTunes and USB icons and won't fix after trying one of those R-Sims, and I wondered if somewhere along the line it may have even had a virus/trojan/malware that has infected my external drive and then my internal drive.  A reason I have thought that is because I have used my daughter's MacPro laptop and plugged in my external drive and I noticed the windows in hers were starting to do the same thing.
    And on top of all that, my fans didn't work for over a year and I had to place an external fan at the back of the computer or it would overheat and shut down, but after resetting the SMU it started working again, but it is very noisy. I have tried to download SMC Fan Control and although it downloads to the HDD, it won't open.
    Sorry its such a long post, I do hope with all of this information someone can help me.
    Thanks so much.

    HI and Welcome to Apple Discussions...
    *Soon after, I installed Quake Wars, L4D 1, 2, Mass Effect 2, Need For Speed: Undercover, Mozilla Firefox and *Sophos Enterprise AV*. Approximately a week after installation, I began to experience malfunctions varying greatly*
    Macs get grumpy when running anti virus software. Disable or completely uninstall Sophos A/V and see if that makes a difference. A/V software on a Mac will slow the drive down more and more as time goes on.
    Also, check the vendor sites for each 3rd party software you installed to make sure they are compatible with 10.6.x
    The "hard reboots" are a result of the system freezing due to incompatible or outdated software.
    Carolyn
    Message was edited by: Carolyn Samit

Maybe you are looking for

  • New MB experience :-)

    I saw the new MacBook announcement and called the local Apple store which happened to have some in stock. So I ran down at lunch and picked one up. I am a long time mac user, starting in the 68k days. I have a 15" MB PRO that was one of the W8609 ser

  • How to setup att email account

    I went throught the process of setting up my ATT email account on my iPhone 4 and I can not get the email to work.  I keep recieving an error that says canot verify my email.

  • What would be convenient way to backup mass roles details from GRC ?

    Hello SCN folks, For a GRC 10.1 environment where in, there are 100k plus roles maintained, what would be an ideal & convenient way to backup the roles details, periodically? Since the volume is high a direct export would result in timeout and huge o

  • Path to Photoshop Plugins/Panels Assets Folder

    I am one of those who is scrambling to recreate a panel that was made in Configurator to HTML5 so please bear with me. For a javascript I am trying to find the path to a file in the "assets" folder within my panel for both Mac & Windows. I want the p

  • Weblogic server in workshop not deploying ear automatically

    Hi, I configured a weblogic server in the workshop studio, I added an ear to it and started. but when I try to access the web page of the web module, it says "cannot find the page". On admin console, it doesn't show any application added to it. Only