[SOLVED] VLC 1.1.9 Crashing "Not enough memory"

Hi, I'm having some problems with VLC 1.1.9 crashing at seemingly random intervals while watching videos (I can confirm I've had problems with .mkv, .avi, .wmv) usually between 10 and 15 minutes after starting. When running from the command line I get this output:
VLC media player 1.1.9 The Luggage (revision exported)
Blocked: call to unsetenv("DBUS_ACTIVATION_ADDRESS")
Blocked: call to unsetenv("DBUS_ACTIVATION_BUS_TYPE")
[0x92488fc] main libvlc: Running vlc with the default interface. Use 'cvlc' to use vlc without interface.
Blocked: call to setlocale(6, "")
Blocked: call to setenv("ORBIT_SOCKETDIR", "/tmp/orbit-ryan", 1)
Warning: call to srand(1303626505)
Warning: call to rand()
Blocked: call to setlocale(6, "")
(process:20992): Gtk-WARNING **: Locale not supported by C library.
Using the fallback 'C' locale.
[0x92e2e6c] signals interface error: signal 17 overriden (0xb4cdb150)
[0x92e2e6c] signals interface error: /usr/lib/libQtCore.so.4(?)[(nil)]
Not enough memory
But if I run free directly after it crashes, it shows I still have almost 3 gigs of ram free:
total used free shared buffers cached
Mem: 3356340 266248 3090092 0 4128 109896
-/+ buffers/cache: 152224 3204116
Swap: 9214972 139628 9075344
If I downgrade to version 1.1.8, it runs just fine, and I get the exact same output minus the last line (the "Not enough memory")
I have this problem when running Gnome, KDE or XFCE on two separate machines; I was wondering if anyone has had the same problem, or has any clues where the problem could be.
Last edited by Ozymandias_117 (2011-04-29 12:43:20)

^^ thanks itman that worked for me. I changed back to alsa plugin and gstreamer backend for KDE.
They say that this bug has been fixed in 1.2 of vlc release:
http://forum.videolan.org/viewtopic.php?f=13&t=89621
Last edited by twilightning (2011-04-27 11:32:41)

Similar Messages

CRASH "Not enough memory to create clipboard. This should never happen."

CRASH Error message: "Not enough memory to create clipboard. This should never happen."
What the F???
SvK

i was talking to someone at frankfurt about this (possibly logic had crashed on something we were looking at - i don't remember) and they said error messages like that were for the developers. the fact you saw the error message yourself was in itself a bug.
i don't know for sure, but i think you are seeing some kind of bug relating to memory management. try deleting history and reorganizing memory if you get this error a lot.

TS1717 keep getting "the itunes library file cannot be saved." there is not enough memory available. then itunes crashes. anyone else having this issue?

error code keeps popping up-the itunes library file cannot be saved. there is not enough memory available. then itunes crashes? anyone else having this issue?

Yes, I'm getting the same issue

K recent upgrades my mac laptop to lion. Since then iMovie crashes when i try to export a movie project. I ofter get a message that says not enough memory in the heap zone. What can be done?

I recent upgraded my mac laptop to lion. Since then iMovie crashes when i try to export a movie project. I ofter get a message that says not enough memory in the heap zone. What can be done?

I recent upgraded my mac laptop to lion. Since then iMovie crashes when i try to export a movie project. I ofter get a message that says not enough memory in the heap zone. What can be done?

CS3: Not enough memory to place file?? (Vista 64 bit) SOLVED!!

For whomever this helps, I fixed my "Not enough memory to place file" problem (running Vista 64 Bit with lots of ram).
After trying everything else (checking cache files, deleting preferences file, uninstalling nearly all fonts, increasing virtual ram on machine, etc.), I solved it by right clicking the launch icon, and then in the compatibility tab checking the "Run this program in compatibility mode for:" box and then choosing the XP OS from the drop down list.
Oddly though, I have a nearly identical Vista 64 bit machine running the same Illustrator CS3 and this has no problems (without the need for this fix).
Add this to your list of things to try.

YES! viveredesign is my new hero.
Adobe, your programs drive me nuts some days.
Windows 7 / 64 bit

PremeierePro CC crash when rendering - not enough memory

I´m on working with a 90 minute project and when trying to render PP CC crash.
PremeierePro CC crash when rendering. It says not enough memory. I´m on a MacBookPro Retina:
Processor 2.8 GHz Intel Core i7
Memory 16 GB 1600 MHz DDR3
Graphics Intel HD Graphics 4000 1024 MB
Software OS X 10.9.1 (13B42)

Kevin said "Update the drivers for both your video cards" so it seems he knows more than I do about Mac's
Read below about some problems/fixes for dual cards
-http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modules.html
-http://forums.adobe.com/thread/1001579
-Use BIOS http://forums.adobe.com/thread/1019004?tstart=0
-link to why http://forums.adobe.com/message/4685328
-http://www.anandtech.com/show/4839/mobile-gpu-faceoff-amd-dynamic-switchable-graphics-vs-n vidia-optimus-technology/2

What does "After Effects error: Not enough memory to initialize PSL. ( 83 :: 8 )" mean?

So, about a week ago I did a fresh install of 64-bit Windows 7 Ultimate on a new PC, and subscribed to the Adobe Creative Cloud, installing After Effects CS6 and Photoshop CS6 from the Adobe Application Manager, then doing all updates (and I just checked right now at 10:35PM on July 26th, I have the latest versions of everything).
After Effects was working completely normal, then just now, I tried to import a Photoshop .psd and I got the error message:
After Effects error: Not enough memory to initialize PSL.
( 83 :: 8 )
Then After Effects crashed. So now it opens up normally, but when I try to import a .psd or open an After Effects project saved from an earlier version of After Effects (CS3 to CS5) I get the same error and a crash, every single time.
Searching the forums, I see people talking about this error when importing .psds into CS5, and they say that getting the latest updates solved the issue for them (which obviously can't help me). I'm running all legit software on a brand new computer with 32 GB of RAM which has passed all my physical stress tests so I know it's not hardware related.
The one thing I saw people suggest is to hold down Ctrl-Alt-Shift when starting the program. When I do this, Windows asks if I want to allow After Effects to make changes to the system, and when I say yes, I can import .psds and open the older AE files. When I close After Effects and reopen it without holding down the Ctrl-Alt-Shift keys, it goes right back to crashing.
Obviously the smart-*** answer is "then hold down Ctrl-Alt-Shift, dummy", and I'll do that for now, but is there any clue what the problem is?
I feel like kind of a chump because I decided to stop using my student versions of Adobe software (I haven't been a student for about four years) and pay the full price for the cloud membership and the latest creative suite, and it's full of bugs.

Now, I get the same ( 83 :: 8 ) error listed above, followed by a new dialog window that reads:
After Effects error: Crash in progress. Last logged message was: <4488> <DynamicLink> <5> C:\Program Files\Adobe\Adobe Premiere Pro CS6\Adobe Premiere Pro.exe
Then, when I click OK, I get:
After Effects can't continue: sorry, After Effects has crashed. For After Effects Help and Support, go to http://www.adobe.com/go/learn_ae_support. If you still can't resolve the issue, please contact Adobe Technical Support (2).
( 0 :: 42 )
Clicking OK to that gives me a chance to save the latest project, then the standard Windows 7 crash dialog window opens, the one that gives me the choice of "Check online for a solution and close the program" or just "Close the program" and lets me View problem details, which are:
Problem signature:
Problem Event Name:          APPCRASH
Application Name:          AfterFX.exe
Application Version:          11.0.0.378
Application Timestamp:          4f6d63ab
Fault Module Name:          StackHash_a85b
Fault Module Version:          6.1.7601.17725
Fault Module Timestamp:          4ec4aa8e
Exception Code:          c0000374
Exception Offset:          00000000000c40f2
OS Version:          6.1.7601.2.1.0.256.1
Locale ID:          1033
Additional Information 1:          a85b
Additional Information 2:          a85ba096cc6b6acabe6eaf35bf34dc60
Additional Information 3:          f862
Additional Information 4:          f86227a9dfa15a47cdb6c94bb0d08360

Not enough memory to complete operation

I've looked through the forums for the "not enough memory to complete operation" error and despite following the advice I found, the error still occurs.
I'm using LabVIEW 2012 to try and continuously monitor our system, recording temperature, power, etc vs time (values obtained from USB-6008 DAQ). The data being saved to file, is done every 60 seconds using a small array (no problems here). The typical run/time memory allocation to LabVIEW is about 180MB (4GB RAM on computer).
The issue I feel is related to our wish to display this data on graphs for extended periods of time. The current iteration of the code works as follows.
1) we have 2 XY graphs with 2 plots each.
2) for each plot, I am initializing clusters of 2 arrays of 100,000 (XY pairs) which are wired to shift registers. I know this is larger than can be displayed on a graph but I am currently more concerned with reducing the number of data copies.
3) Every 10th data point is added into the arrays using an In Place Element Unbundle/Bundle along with a "Replace Array Subset". This means there are approximatly 8640 points per day. (A single day is the shortest time span typically viewed)
4) For two plots on an XY graph, two clusters are combined in an array (using Build Array). I think this is my problem right here. Since everytime I update the graphs Labview has to allocate memory for the 4 XY plots. ( Am I correct here?)
Decimating the data further when looking over multiple days will reduce the amount written to the plots. However this operation creates data copies. Is it worthwhile in this case?
Instead of initializing 4 clusters (1 for each plot) and combining into arrays later, would it be better to initialize Array of cluster of arrays (2 plots per graph) and update the data by "index / unbundle / replace array subset / bundle replace array subset" series of operations?
Solved!
Go to Solution.

Hooovahh wrote:
But what I think is more important is your middle loop is unbounded in size for its arrays. Memory will continue to grow until it crashes. You removed the write VI but I'm guessing you are essentially overwritting the old file with all the same data but with 1 extra data point. Why not just write that one extra data point by appending to the existing file? Look at the Write To Spreadsheet which shows how to append to file (it is an optional input).
If you'll notice the section where I comment that the save VI is deleted, there is a null array wired to the shift register. While this probably isn't the best practice, the array builds to 60, appended to the text file, and overwritten with the null array. This is to avoid opening/closing the file every second.
The other array there stores power and time for every data point when the sun is up for the day (probably near 50,000 data points). This is done to calculate the days insulation by integration. This array could probably stand some improvement using an initialized array. (i got tunnel vision on the other part of the code and missed this).
In regards to the graphs containing multiple days worth of data to be viewed at any time, yes this is a requirement (the more the better). This is for monitoring a solar array at our University and, once free from bugs, will be linked to a web page using the Web Server. So individuals may view data within the past 1,2, or even 3 weeks. Normally, I would just have a separate VI for viewing data when desired but 24/7 access to view the updated data is a requirement.
Am I correct in that the Build Arrays (just prior to the graphs) makes a data copy of each cluster? Could it be this large data copy that's the cause of the error? My understanding from other posts is that this error is generally linked to non-continuous memory allocation for arrays/clusters.

'Not enough memory' + 'Internal error' x 'Could not render the database' = Parting of company :(

I can’t believe the amount of concern / disappointment / frustration spread across every associated Fireworks forum re: CS5’s
"An internal error occurred"
"Could not render the database"
"Not enough memory"
"Crash without notification"
Etc.,
We installed the CS5 trial – being more than wary about Adobe’s past releases – and lo and behold, all of the above beared ‘true’!
This is nothing new of course, we’ve all been experiencing this since CS3 – but hoping against hope - a newer release would solve the poor memory management and general ‘bug-ridden’ code; alas - as per usual, Adobe has not responded with any pro-solution based action, but successfully furthered our frustration with a couple of fresh gimmicks without strengthening the core software.
As an avid fan of adobe software […and a Fireworks freak] working in a design house that has many different employees with widespread software tastes – I eventually said ‘enough is enough’ after the umpteenth crash [as of 3 weeks ago] and have revisited the Rebel Alliance; ‘yes, CorelDraw’! No I’m not going to go into some tirade about how much better Corel is etc. - as it has its own strengths and weaknesses, too […but without the hourly crashes] – so to be honest, we figure the time increase in some projects due to using Corel […time is diminishing with each project’s acquired experience] are negated by the downtime of Fireworks; so far, this is holding true.
This may seem drastic, but it has been a long time coming – that is, implementing a move from our decade invested workflow to a ‘somewhat’ new schema, but due to the disappointing aforementioned, eventually principal / expenditure comparisons / sanity / lack of support all culminate to such, and if there’s no support for the competition, well – then there is ‘no’ competition; a luxury Adobe has taken for granted way too long.
I truly hope Adobe turns around and fixes their ways, until then – we’ll be supporting those that do – and hopefully along the way, just maybe, with the added funds from disgruntled adobe x-pats – the software will far exceed what I used to love and adore […how I miss macromedia]; honestly, it would be near on impossible to argue which suite was better ‘either way’ – so it may not be such a distant future. Besides, with the market-door Adobe is opening due to such poor software, the new player sniffing around the edges will be welcomed by many with open arms; I know my/our allegiance will go straight to the company with the greatest software stability and sound support, whomever that maybe.
So here’s to hoping no more, and actually doing! Very sad...

I am also getting this error message. It happens randomly. Adobe help told me to close and reopen FW and then it stopped happening. Does this sound like a good solution to anyone?

MS Project Professional 2010 - Configuration Failure - There is not enough memory to complete the operation

Windows 7 64, MS Office Pro 2010 installed add working - 4 gig of memory 500 gig + of free disk space. I get the below results when trying to start project the first time.
Tried usual admin rights stuff and turning off norton and firewall. Same results after re-install, restart,
repair, you know all the usual.
Note I borrowed the steps below from another thread that was never answered.
http://answers.microsoft.com/en-us/office/forum/office_2010-project/ms-project-crash-after-configuring/e6c67a84-5749-4b19-8cbd-562189d9785c
1. Microsoft Project Professionnal 2010 popup: Configuration Progress splash screen with progress bar and yellow wave at bottom.
2. Microsoft Office Project MUI (English) 2010 popup: Please wait while Windows configures Microsoft Office Project MUI (English) 2010, then disappears.
3. Microsoft Project 2010 logo popup with green wave at bottom.
4. Steps 1-3 repeated 3 times.
5. Microsoft Project popup: There is not enough memory to complete the operation. To free up available memory, close programs, projects, or windows you aren't using, and try again.

I located a solution, finally! It was solved back in 2007. It is NOT a memory issue nor a conflict with other software as most of the forum advisers suggest. It is a pure MICROSOFT problem with Registry permissions. And as they provide no solution
(as of 2014 yes 7 years) one has to use a registry hacking tool to take command of the registry. The solution that worked perfectly for me is located here :
http://www.techtalkz.com/microsoft-office/157044-unable-install-project-standard-2007-a.html
Full thanks to David Chatfield for finding the answer back in July of 2007!

SBS 2011 Remote Web Workplace issues not enough memory???

Hi,
Were having problems with the RWW website on our SBS 2011 server, users are able to logon, but the connect buttons of the computers are not working, if we click on them nothing happes, no error message, nothing.
When a users logs on we see 5 error messages in the application log of the SBS server, 4 times event 3 appears and 1 time event 1309, all messages say there is not enough memory available (less then 5%). When we close some applications/services and the memory
usage is below 95% the RWW websites works fine and the connect buttons function properly.
This server has 16GB of RAM, beside the standard SBS 2011 installation we installed only anti-virus and back-up software on this server.
We have several other customers that are running SBS 2011 servers, they have less internal memory and sometimes just 98% of free memory, but their RWW websites function without any problems and don't get these error messages.
Can someone tell me how to resolve this problem?
This are the complete error messages:
Logboeknaam:   Application
Bron:          System.ServiceModel 4.0.0.0
Datum:         16-5-2013 10:36:34
Gebeurtenis-id:3
Taakcategorie: WebHost
Niveau:        Fout
Trefwoorden:   Klassiek
Gebruiker:     NETWORK SERVICE
Computer:
Beschrijving:
WebHost kan een aanvraag niet verwerken.
Informatie afzender: System.ServiceModel.ServiceHostingEnvironment+HostingManager/28106152
Uitzondering: System.ServiceModel.ServiceActivationException: De service /Remote/BuiltIns/HomePage/GadgetDnD/GadgetDnDService.svc kan niet worden geactiveerd als gevolg van een uitzondering tijdens de compilatie. Het uitzonderingsbericht is: Het controleren
van de geheugenpoorten is mislukt omdat het vrije geheugen (462663680 byte) minder bedraagt dan 5% van het totale geheugen. Het gevolg is dat de service niet beschikbaar is voor binnenkomende aanvragen. U kunt dit probleem oplossen door de belasting van de
computer te verlagen of door de waarde van inFreeMemoryPercentageToActivateService in het configuratie-element serviceHostingEnvironment aan te passen.. ---> System.InsufficientMemoryException: Het controleren van de geheugenpoorten is mislukt omdat het
vrije geheugen (462663680 byte) minder bedraagt dan 5% van het totale geheugen. Het gevolg is dat de service niet beschikbaar is voor binnenkomende aanvragen. U kunt dit probleem oplossen door de belasting van de computer te verlagen of door de waarde van
inFreeMemoryPercentageToActivateService in het configuratie-element serviceHostingEnvironment aan te passen.
   bij System.ServiceModel.Activation.ServiceMemoryGates.Check(Int32 minFreeMemoryPercentage, Boolean throwOnLowMemory, UInt64& availableMemoryBytes)
   bij System.ServiceModel.ServiceHostingEnvironment.HostingManager.CheckMemoryCloseIdleServices(EventTraceActivity eventTraceActivity)
   bij System.ServiceModel.ServiceHostingEnvironment.HostingManager.EnsureServiceAvailable(String normalizedVirtualPath, EventTraceActivity eventTraceActivity)
   --- Einde van intern uitzonderingsstackpad ---
   bij System.ServiceModel.ServiceHostingEnvironment.HostingManager.EnsureServiceAvailable(String normalizedVirtualPath, EventTraceActivity eventTraceActivity)
   bij System.ServiceModel.ServiceHostingEnvironment.EnsureServiceAvailableFast(String relativeVirtualPath, EventTraceActivity eventTraceActivity)
Procesnaam: w3wp
Proces-id: 21252
Gebeurtenis-XML:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="System.ServiceModel 4.0.0.0" />
    <EventID Qualifiers="49154">3</EventID>
    <Level>2</Level>
    <Task>5</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2013-05-16T08:36:34.000000000Z" />
    <EventRecordID>404277</EventRecordID>
    <Channel>Application</Channel>
    <Computer></Computer>
    <Security UserID="S-1-5-20" />
</System>
<EventData>
    <Data>System.ServiceModel.ServiceHostingEnvironment+HostingManager/28106152</Data>
    <Data>System.ServiceModel.ServiceActivationException: De service /Remote/BuiltIns/HomePage/GadgetDnD/GadgetDnDService.svc kan niet worden geactiveerd als gevolg van een uitzondering tijdens de compilatie. Het uitzonderingsbericht is:
Het controleren van de geheugenpoorten is mislukt omdat het vrije geheugen (462663680 byte) minder bedraagt dan 5% van het totale geheugen. Het gevolg is dat de service niet beschikbaar is voor binnenkomende aanvragen. U kunt dit probleem oplossen door de
belasting van de computer te verlagen of door de waarde van inFreeMemoryPercentageToActivateService in het configuratie-element serviceHostingEnvironment aan te passen.. ---> System.InsufficientMemoryException: Het controleren van de geheugenpoorten
is mislukt omdat het vrije geheugen (462663680 byte) minder bedraagt dan 5% van het totale geheugen. Het gevolg is dat de service niet beschikbaar is voor binnenkomende aanvragen. U kunt dit probleem oplossen door de belasting van de computer te verlagen of
door de waarde van inFreeMemoryPercentageToActivateService in het configuratie-element serviceHostingEnvironment aan te passen.
   bij System.ServiceModel.Activation.ServiceMemoryGates.Check(Int32 minFreeMemoryPercentage, Boolean throwOnLowMemory, UInt64& availableMemoryBytes)
   bij System.ServiceModel.ServiceHostingEnvironment.HostingManager.CheckMemoryCloseIdleServices(EventTraceActivity eventTraceActivity)
   bij System.ServiceModel.ServiceHostingEnvironment.HostingManager.EnsureServiceAvailable(String normalizedVirtualPath, EventTraceActivity eventTraceActivity)
   --- Einde van intern uitzonderingsstackpad ---
   bij System.ServiceModel.ServiceHostingEnvironment.HostingManager.EnsureServiceAvailable(String normalizedVirtualPath, EventTraceActivity eventTraceActivity)
   bij System.ServiceModel.ServiceHostingEnvironment.EnsureServiceAvailableFast(String relativeVirtualPath, EventTraceActivity eventTraceActivity)</Data>
    <Data>w3wp</Data>
    <Data>21252</Data>
</EventData>
</Event>
Logboeknaam:   Application
Bron:          ASP.NET 4.0.30319.0
Datum:         16-5-2013 10:36:34
Gebeurtenis-id:1309
Taakcategorie: Webgebeurtenis
Niveau:        Waarschuwing
Trefwoorden:   Klassiek
Gebruiker:     n.v.t.
Computer:
Beschrijving:
Gebeurteniscode: 3005
Gebeurtenisbericht: Er is een onverwerkte uitzondering opgetreden.
Gebeurtenistijd: 16-5-2013 10:36:34
Gebeurtenistijd (UTC): 16-5-2013 8:36:34
Gebeurtenis-id: 2ce25cc6a90146e8ad0fa32e504b86ef
Gebeurtenisreeks: 134
Gebeurtenisinstantie: 7
Gebeurtenisdetailcode: 0
Toepassingsinformatie:
    Toepassingsdomein: /LM/W3SVC/1/ROOT/Remote-1-130131644927895718
    Vertrouwensniveau: Full
    Virtueel pad toepassing: /Remote
    Toepassingspad: C:\Program Files\Windows Small Business Server\Bin\WebApp\RemoteAccess\
    Computernaam:
Procesinformatie:
    Proces-id: 21252
    Procesnaam: w3wp.exe
    Accountnaam: NT AUTHORITY\NETWORK SERVICE
Uitzonderingsinformatie:
    Uitzonderingstype: InsufficientMemoryException
    Uitzonderingsbericht: Het controleren van de geheugenpoorten is mislukt omdat het vrije geheugen (462663680 byte) minder bedraagt dan 5% van het totale geheugen. Het gevolg is dat de service niet beschikbaar is voor binnenkomende aanvragen.
U kunt dit probleem oplossen door de belasting van de computer te verlagen of door de waarde van inFreeMemoryPercentageToActivateService in het configuratie-element serviceHostingEnvironment aan te passen.
   bij System.ServiceModel.Activation.ServiceMemoryGates.Check(Int32 minFreeMemoryPercentage, Boolean throwOnLowMemory, UInt64& availableMemoryBytes)
   bij System.ServiceModel.ServiceHostingEnvironment.HostingManager.CheckMemoryCloseIdleServices(EventTraceActivity eventTraceActivity)
   bij System.ServiceModel.ServiceHostingEnvironment.HostingManager.EnsureServiceAvailable(String normalizedVirtualPath, EventTraceActivity eventTraceActivity)
Aanvraaginformatie:
    Aanvraag-URL: https://mail.mannekus.com:443/Remote/BuiltIns/HomePage/GadgetDnD/GadgetDnDService.svc/js
    Aanvraagpad: /Remote/BuiltIns/HomePage/GadgetDnD/GadgetDnDService.svc/js
    Hostadres gebruiker: 192.168.10.91
    Gebruiker: MANNEKUS\ITSN
    Is geverifieerd: True
    Verificatietype: Forms
    Accountnaam thread: NT AUTHORITY\NETWORK SERVICE
Threadinformatie:
    Thread-id: 28
    Accountnaam thread: NT AUTHORITY\NETWORK SERVICE
    Imiteert: False
    Stacktracering:    bij System.ServiceModel.Activation.ServiceMemoryGates.Check(Int32 minFreeMemoryPercentage, Boolean throwOnLowMemory, UInt64& availableMemoryBytes)
   bij System.ServiceModel.ServiceHostingEnvironment.HostingManager.CheckMemoryCloseIdleServices(EventTraceActivity eventTraceActivity)
   bij System.ServiceModel.ServiceHostingEnvironment.HostingManager.EnsureServiceAvailable(String normalizedVirtualPath, EventTraceActivity eventTraceActivity)
Aangepaste gebeurtenisdetails:
Gebeurtenis-XML:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="ASP.NET 4.0.30319.0" />
    <EventID Qualifiers="32768">1309</EventID>
    <Level>3</Level>
    <Task>3</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2013-05-16T08:36:34.000000000Z" />
    <EventRecordID>404279</EventRecordID>
    <Channel>Application</Channel>
    <Computer></Computer>
    <Security />
</System>
<EventData>
    <Data>3005</Data>
    <Data>Er is een onverwerkte uitzondering opgetreden.</Data>
    <Data>16-5-2013 10:36:34</Data>
    <Data>16-5-2013 8:36:34</Data>
    <Data>2ce25cc6a90146e8ad0fa32e504b86ef</Data>
    <Data>134</Data>
    <Data>7</Data>
    <Data>0</Data>
    <Data>/LM/W3SVC/1/ROOT/Remote-1-130131644927895718</Data>
    <Data>Full</Data>
    <Data>/Remote</Data>
    <Data>C:\Program Files\Windows Small Business Server\Bin\WebApp\RemoteAccess\</Data>
    <Data></Data>
    <Data>
    </Data>
    <Data>21252</Data>
    <Data>w3wp.exe</Data>
    <Data>NT AUTHORITY\NETWORK SERVICE</Data>
    <Data>InsufficientMemoryException</Data>
    <Data>Het controleren van de geheugenpoorten is mislukt omdat het vrije geheugen (462663680 byte) minder bedraagt dan 5% van het totale geheugen. Het gevolg is dat de service niet beschikbaar is voor binnenkomende aanvragen. U kunt
dit probleem oplossen door de belasting van de computer te verlagen of door de waarde van inFreeMemoryPercentageToActivateService in het configuratie-element serviceHostingEnvironment aan te passen.
   bij System.ServiceModel.Activation.ServiceMemoryGates.Check(Int32 minFreeMemoryPercentage, Boolean throwOnLowMemory, UInt64& availableMemoryBytes)
   bij System.ServiceModel.ServiceHostingEnvironment.HostingManager.CheckMemoryCloseIdleServices(EventTraceActivity eventTraceActivity)
   bij System.ServiceModel.ServiceHostingEnvironment.HostingManager.EnsureServiceAvailable(String normalizedVirtualPath, EventTraceActivity eventTraceActivity)
</Data>
    <Data>https://mail.mannekus.com:443/Remote/BuiltIns/HomePage/GadgetDnD/GadgetDnDService.svc/js</Data>
    <Data>/Remote/BuiltIns/HomePage/GadgetDnD/GadgetDnDService.svc/js</Data>
    <Data>192.168.10.91</Data>
    <Data>MANNEKUS\ITSN</Data>
    <Data>True</Data>
    <Data>Forms</Data>
    <Data>NT AUTHORITY\NETWORK SERVICE</Data>
    <Data>28</Data>
    <Data>NT AUTHORITY\NETWORK SERVICE</Data>
    <Data>False</Data>
    <Data>   bij System.ServiceModel.Activation.ServiceMemoryGates.Check(Int32 minFreeMemoryPercentage, Boolean throwOnLowMemory, UInt64& availableMemoryBytes)
   bij System.ServiceModel.ServiceHostingEnvironment.HostingManager.CheckMemoryCloseIdleServices(EventTraceActivity eventTraceActivity)
   bij System.ServiceModel.ServiceHostingEnvironment.HostingManager.EnsureServiceAvailable(String normalizedVirtualPath, EventTraceActivity eventTraceActivity)
</Data>
</EventData>
</Event>

Yes, many of our customers use the same anti-virus software, Kaspersky AV 6.0, and the same back-up software, Ashay online back-up.
A reboot temporarily solves the problem but when the memory usage gets above 95% the problem gets back.
This site has about 40 user accounts.
The error message states the following:
To resolve this problem reducethe load on the
computer or modify the valueinFreeMemoryPercentageToActivateService in
the configuration element service
hosting environment.
Where could we check if there is a limit of 5% or less free memory set, which configuration file should we check?

How do i allocate more memory to my iphoto application? i am unable to add more photos to my library i keep getting a pop up saying not enough memory in my application

how do i allocate more memory from my hd to my iphoto application? i have over 80 gb on my hard drive, but only 1.7 gb allocated to my iphoto application & i am unable to add more photos to my library. i keep getting a popup that says not enough application memory.

There is excessive swapping of data between physical memory (that is, the memory chips on the logic board) and virtual memory (one or more files on the startup volume.) That activity is relatively slow and causes the whole system to be less responsive. It can happen for two reasons:
A long-running process with a memory leak (a kind of bug)
Not enough memory for your usage pattern
Tracking down a memory leak can be difficult, and it may come down to a process of elimination.
These instructions are for OS X 10.9 ("Mavericks.") The procedure may be slightly different for earlier versions of OS X.
When you notice the swap activity, open the Activity Monitor application and select All Processes from the View menu, if it's not already selected. Select the Memory tab. Click the heading of the Real Mem column in the process table twice to sort the table with the highest value at the top. If you don't see that column, select
View ▹ Columns ▹ Real Memory
from the menu bar.
If one process (excluding "kernel_task") is using much more memory than all the others, that could be an indication of a leak. A better indication would be a process that continually grabs more and more real memory over time without ever releasing it. Here is an example of how it's done.
The processes named "Safari Web Content" render web pages for Safari. They use a lot of memory and may leak if certain Safari extensions or third-party web plugins are installed. Consider them prime suspects.
Another process often implicated in memory leaks is "inkjet4" or "inkjet8," which is a component of the HP printing software. If it's present, force-quit the process in Activity Monitor to solve the problem temporarily. Empty the print queues in the Printers & Scanners preference pane (which has a slightly different name in each recent version of OS X.) If you don't use an HP printer, remove the software. Otherwise, if the problem is recurrent, update the software (which may not help) or contact HP support.
"Wired" memory should be a small part of the total. That memory is not swapped, but it makes less physical memory available which may then result in swapping. If you have a lot of wired memory, that's usually an indication of a memory leak in a third-party program that modifies the operating system at a low level. Ask for guidance in that case.
If you don't have an obvious memory leak, your options are to install more memory (if possible) or to run fewer programs simultaneously.
The next suggestion is only for users familiar with the shell. For a more precise, but potentially misleading, test, run the following command:
sudo leaks -nocontext -nostacks process | grep total
where process is the name of a process you suspect of leaking memory. Almost every process will leak some memory; the question is how much, and especially how much the leak increases with time. I can’t be more specific. See the leaks(1) man page and the Apple developer documentation for details.

Continous capture to AVI -- not enough memory

I'm running LabView 2009 right now with two Camera Link cameras (JAI CM-200MCL), each capable of running at roughly 25 fps with an NI PCIe 1430 frame grabber (They're rated for 30 fps, but I haven't been able to get them to run at this speed in LabView). I'm trying to get it so that I can capture a 30 second movie at least in which the images in both videos can be roughly coordinated with eachother in the time domain.
Currently, I'm running into two major problems:
1) When imaging with both cameras and writing them to their own AVIs simultaneously, the respective camera fps values drop to about 17 each, screwing up the time fidelity of the resulting video and making analysis virtually impossible.
2) Whenever I try to implement the code with newer AVI sub VIs in labview (requiring a compression codec), or when I try to take the raw VI and compress it by reading it and writing it to a new AVI file, my system runs out of memory and I get a message like this:
Error -1074396159 occurred at IMAQ AVI2 Write Frame
Possible reason(s):
IMAQ Vision: Not enough memory for requested operation.
Does anyone know what I can do to solve this? Currently I'm at a loss as to next steps and can't seem to find a solution in the various discussion threads I've read on similar topics.
Attachments:
Vision Acquisition_2cam.vi ‏200 KB
Grab and Save to AVI.vi ‏52 KB
Convert Avis.vi ‏18 KB

Hi floomich86,
When do you get the error? How many times the acquisition loop runs before you get the error?
Looking at it now, I think you're right that it's not a throughput issue, but has to do with the memory being used up. I have a couple recommendations:
1) Try using a codec after to process your images so they're smaller. Use the IMAQ Get Codec Names node to find the various codecs available on your computer (it returns an array of all the various codecs), then use an index array function to choose one of these (try an NI one to start). Then wire this codec into your IMAQ AVI Create node in your Vision_Acquisition_2cam.vi. Adding this compression should help your images take up less memory.
2) This seems like a good application for the Producer-Consumer architecture. This would require revamping your code in a major way, but I think using this architecture would improve performance. This architecture is best for programs that need to gather data in one loop and process it in another simultaneously.
Here are some examples of the Producer-Consumer architecture. I tried to find some specifically with Vision functions in them but I couldn't. Yet, you can still see how the architecture and data gathering/analysis works with these.
Here is a white paper to introduce the architecture:
http://www.ni.com/white-paper/3023/en/
Here are some examples:
https://decibel.ni.com/content/docs/DOC-26558
https://decibel.ni.com/content/docs/DOC-2431
https://decibel.ni.com/content/docs/DOC-2145
Please let me know if these are helpful.
Julian R.
Applications Engineer
National Instruments

Getting " Not enough memory for the operation error " in BOE

Hi,
We are using BOE 11.0.
we try to schedule a new report with multiple database logins for testing in BOE. When we run the report we are getting error like "Not enough memory for the operation error"
The same report has been executed successfully when we run using Crystal reports developer. The report is fectching less than 10K records from all the databases together.
Please let me know which is causing the issue and also let me know is there any limit in the number of databases connecting for a single report.
many thanks in advance for all your help.
Cheers,
Suri ;-)

Hi Sarthan,
Sorry. I'm new to BOE. We know only scheduling the reports creating folders etc. :-)
I've seen one parameter "Maximum Cache Size Allowed (KBytes)" and the value for this parameter is 5000.
If we change it to a big number whether we can solve the issue ? Please suggest.
Cheers,
Suri ;-)

Could not complete the save command because there is not enough memory (RAM)

Hi There,
As per subject line we are using Photoshop CC on 3 different computers, got one error frequently on all systems "could not complete the save command because there is not enough memory (RAM)".
System Configuration:
2 Systems have Dual Core processor with 4 GB RAM
& 1 System have Core i3 processor with 8 GB RAM
We tried to solve our end but still not resolve.
Regards,
Pankaj A. Pagare
Cont. No. 9922507601

http://forums.adobe.com/community/photoshop
This forum is actually about the Cloud as delivery, not about using individual programs
If you start at the Forums Index http://forums.adobe.com/index.jspa
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says ALL FORUMS) to open the drop down list and scroll

[SOLVED] VLC 1.1.9 Crashing "Not enough memory"

Similar Messages

Maybe you are looking for