[SOLVED] WRT300N change language?

Hi everyone!
Ive got a problem, I dont seem to find a way to change my language on my WRT300N router to english.
A little background. Sent my router in for repair and got an new back that has germany language in the setup and I cant change it. The nearest I got was to the page where I upgrade my firmware and just above that option there is another option that says "Wählen Sie die Sprache aus:" and there I can choose "Englisch" and I do that but nothing is happening. I have also downloaded a new english firmware 2.00.20 but that doesnt solve my problem either.
So if there is anyone who knows what I should do to solve this Im very happy because its so frustating to try to configure in an language that I dont understand.
Message Edited by Johnsson on 11-20-2008 05:38 AM

Hi again!
Your advice didnt work for my router, got an "404 file not found" error when I tried to connect to http://192.168.1.1/language.htm
But I Finally managed to solve it. I did an last try to download an firmware from my local linksys site and choosed "Englisch" and upgraded and it worked.
Now I can finally do some more advanced setup

Similar Messages

[SOLVED] How change language in Cinnamon Desktop Environment

Hi,
I wanted to change the language of cinnamon but I do not see any option to change the language. I have installed cinnamon-translations.
Thanks for all help
Last edited by formoza (2014-08-01 20:00:31)

Things changed recently with the introduction of the "mintlocale" package in Linux Mint, which now handles this in Cinnamon.
For now, to add new locales you need to still use the /etc/locale.gen and locale-gen way of adding them.
To change language used, you need the mintlocale package installed.

[SOLVED]LibreOffice changed language, can't turn back to english.

Hi, so I installed LibreOffice about two weeks ago and it has worked just fine and dandy until today when I tried opening a Microsoft Word document, it loaded but the workspace was black with white letters and it's Afrikaans or something similar, my question is if there's a surefire way to change it back to english? I already tried uninstalling/reinstalling but had no luck with that, even if I open other documents or start a new one it's in that same strange configuration, could anyone help me with this, please?
Last edited by nilith (2011-08-27 00:19:12)

Wow, I don't know how or why, but I uninstalled LibreOffice, then the next day after a fresh reboot reinstalled it and it changed back to english !
Still, thank you so much for taking the time to answer my question, if this happens again I'll make sure to try out your suggestion.

[SOLVED]How Can I change language on Google in Opera?

Hello, I have a problem with Opera. I try to change de language of google to another language, but it has no effect:
As you can see, I tried to change the language of google (it's for now in spanish) but it never changes. In konqueror and Firefox it changes correctly.
Cookies on Opera are activated.
What must I do to solve this problem? Maybe a bug?
Greetings
Last edited by Davigetto (2007-11-16 15:14:17)

Well, cookies were activated, I have made all I could..., but nothing work.
I have solved the problem at "brutal mode", I have erased all .opera folder xDDD, now google can change Language
Strange...
Thank You for all your help
Last edited by Davigetto (2007-11-16 15:13:44)

Change language in HP Solution Center?

I have a problem:
A part of HP Solution Center is in English, but all settings are in Russian. So is there a way to change language in some ini file or somewhere in settings?

Hello lumaris,
Welcome to the HP Support Forums!
I understand you have the HP Solution Center software installed on your computer and it is in a different language. I am not aware of any setting within the software to change this, I believe it comes from the setting on the computer.
You could try uninstalling and installing the printer software, this might get things lined back to all the correct language.
Regards,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Change language of Skype user interface

Someone called me from Albania. Now all my Skype instructions are in the Albanian language. How do I get them back to english?
Solved!
Go to Solution.

Hi and welcome to the Skype Community,
Please take a look at the instructions here to change your language back in Skype for Windows: http://community.skype.com/t5/Windows-desktop-client/How-to-change-language-back-to-English/m-p/2097...
Follow the latest Skype Community News
↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

Change language on pro8600

change to english on pro8600

Lets start with you helping by identifying your notebook completely.
HP has produced and brought to market more than a thousand different models of notebooksmodels of notebooks and desktop PCs over the years. It is difficult to help you if we don't know which one you own..
Method #1: If the notebook will boot into Windows, you can retrieve your Product Number by pressing Fn + Esc key.
Method #2:
Remove the battery and look in the compartment where the battery was installed. You should see a Service tag with printed part number and a product name. Please post the p/n (with all alphanumeric characters here). If you live outside of North America, it helps us if you post the country of purchase.
Don't forget to post the name of the installed operating system, if you haven't already done that.
In your case that is the most important thing besides identifyin your notebook that you can do to help us help you. You won't be "change language on pro8600" .You will be changing the display language of your Microsoft Windows operating system. Whether or not we can help you with that depends on the version of the Windows Operating system that is installed.
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Cannot change language to Czech

Hello guys, when I start my ZIIO10 it says something about crashed application for com.android.deskclock stopped unexpectedly.
It is after fw update, I tried all factory resets possible, even power and + option.
Also when I change language to Czech, after restart it is again english. But on the language screen I can see CZ sign instead of US.
How can I solve this?
Thanks

Hello guys, anyone has got any idea? I am desperate. Since the beginning I have problems with this device.
I would like to try other reset. Maybe with ADB. Could somedy explain me how to do it?
I also tried reflashing with the firmware and no change.
Thanks

Problem: Changing Language for Web Dynpro Java within NW Portal (i18n)

Hi Experts out there,
I hope all you had a nice Christmas and a big New Years Eve :)!!!
i got a challenge for you about WD Java and internationalization (i18n)
Here is the scenario:
We are using a SAP NetWeaver Portal 7.0 and my task is to implement some smaller Web Dynpro Applications.
These Applications must be i18n conform, so i just created (according to the corresponding WD Java tutorial) some ".xlf" files.
Okay...Everything is working fine. The user can log at the portal and the application is displayed in his language, which is "english" or "german". (the application is just a simple form)
So far so good...Now here comes the point where it's getting tricky...
When the user wants to change his assigned language (of the portal user) he can use the "personalize" button in the Masthead (-> change portal language). All the portal content should now be displayed in his new chosen language.
For example the user is logged into the portal with "german" as portal language and now changes his languages settings into "english". After this everything in the portal (navigation, portal iViews ) is displayed in the changed language (from english into german) ...
BUT: my Web Dynpro Java Application stays as the original languages setting was. That means the whole portal is now english, but my WD Java Appl. stays german .
Only if the user logs of and logs in again, the WD Java Appl. is displayed in the corresponding portal language...
VERY Strange?!?!
Can anybody give me a hint how to solve this problem?
I guess i have to re-initiate the Web Dynpro Application some how ...(like killing the application and restarting it ...) but is just a "weak guess"...
Any Help / Hint is more than welcome !!!
Cheers
Stefan

Hi Stefan,
This correct see SAP Note [947081|https://service.sap.com/sap/support/notes/947081]
If the locale for the Web Dynpro iView is changed in the portal (through portal personalization), this is not reflected in the running login session. The user needs to logoff and login again, in order to see the locale change in the Web Dynpro iView.
Regards,
Leo

Change language of photosmart A616

How do I change the language of the photosmart A616 after the initial install? It worked fine for a while and when I went to print it was in japanese. I cannot read what is on the display screen to know how to reset the language.

Hi Gigi5,
You will find the change language under the setup - preferences - language. You can also find this information on the User guide page 61.
http://h10032.www1.hp.com/ctg/Manual/c00701123.pdf
Japanese translation:
セットアップ] - [プリファレンス] - [言語
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

What key(s) do i type to change language from english to other? i am writing s story in dual languages. i was told to click command and space bar together but it is not working.

what key(s) do it type to change language from english to other? i am writing a story in dual languages. I was told to click command and space bar together but it is not working.

Command Spacebar opens Spotlight as you have found out. If you want to change languages you need to say what app you are using to write the story in, I'm guessing you are using Pages or MS Word. If that's the case
Pages: Open Inspector - Click the T tab - Click Language and change your language.
MS Word: Tools Menu - Language - Choose your language.

How to reload the screen when changing languages in JavaFX 2?

I'm beginner with javaFX and i need to change language of the screen. but i have no idea how to reload the screen when the language was changed. The application have a button where have the language available. I want just refresh screen when the user change language.
Here is the start method to show the stage.
    @Override
    public void start(Stage stage) throws Exception
        this.stage = stage;
        Locale locale = Locale.getDefault();
        ResourceBundle rb = ResourceBundle.getBundle("resources/Label",locale);
        loader = new FXMLLoader(getClass().getResource("FXMLDocument.fxml"),rb);
        root = (Parent)loader.load();
        FXMLDocumentController controller = (FXMLDocumentController) loader.getController();
        controller.setMain(this);
        scene = new Scene(root);
        stage.setScene(scene);
        stage.show();
here is the function to change the language(in the same class with start function),the rb is the new ResourceBundle:
    public void refresh(ResourceBundle rb)
          //change the language here
1. I don't want to use the resourceBundle to get value in resource file and set label in scene one by one.like following:
this.btnLabel.setText(rb.getString(key.test));
2. I don't want to reload the scene,like following:
    public void refresh(ResourceBundle rb)
         try
            loader = new FXMLLoader(getClass().getResource("FXMLDocument.fxml"),rb);
            root = (Parent)loader.load();
            scene.setRoot(root);
            FXMLDocumentController controller = (FXMLDocumentController) loader.getController();
            controller.setMain(this);
        catch(Exception err)
            err.printStackTrace();
So do we have a solution to just set the resourceBundle and reload the scene easier?
Thanks and best regards!

Your option 2 (reload the FXML for the scene using the new resource bundle as a parameter), is the way this would normally be done and what I would recommend.
Failing that, you could use option 1 of individually resetting the label text of labeled items (I don't really recommend this).
Why don't you want to use option 2?
Perhaps it is because there is some internal state of the UI which differs from the initial state when the the UI is first loaded (e.g. user has typed text in a text field and you want to preserve that). If that's the case you will need to either go with your option 1 of individually resetting the label text of labeled items, or implement something which preserves the UI state and user data by saving it in memory or to disk, reloading the UI via the FXMLLoader (essentially your option 2), then restoring the UI state and user data to what it was before the language change. Preserving and restoring the modified state seems complicated to me if you have a lot of state, so I wouldn't really advise this approach unless you really needed it.

I changed language from EN-GB to EN-US but my keyboard is still British (only when using FF). How can I change it to EN-US? in English

I changed language (based on an answer in this forum) from EN-GB to EN-US but my keyboard is still British (only when using FF). How can I change it to EN-US?
Should I just export my bookmarks, uninstall and reinstall the proper version? That may just be shorter than anything else.

GREAT!. Thanks a lot for educating me. There seem to be a million things we have to learn about our computers and when we run into them the first time they seem insurmountable. You pointed me to the solution. Thanks again. Ben

Changing Language in 6120

Hi all
I am having trouble with changing language in 6120.
Usually, I am use to change language by pressing the # key when i write some thing... BUT the thing is that in 6120, it will change the language only to the language you choose.
E.G main language is English, I write a URL in english that i want to get to, now, i am in the site and wants to write in Hebrew, However, the options of changing language by pressing on # key is only 123, abc, ABC but not Hebrew, even when i have Hebrew fonts installed. thus, i need to go to the language section, choose Main language as Hebrew, go back to the site and write in hebrew ... cant i do it just with the # key ?! so i will have 123, abc, ABC, אבג ... BTW, i had this option in my old 6230i

In July of this year, Apple made a change to the iTunes store which essentially makes this impossible (for now). Until that time, there was a workaround you could use as per their Knowledgebase which would let you set the language of the iTunes Store back to English, regardless of what country your iTunes account was based in.
There have been repeated attempts from the user community to get Apple to acknowledge and address this issue, but the customer service staff have thusfar only referred to the KB article, which doesn't actually help. For now, your only option is to select a different country's store by selecting the flag icon/button on the lower right corner of the iTunes store and reading about applications or music in another store...of course, this actually will log out out of your itunes store account, which means you can't purchase anything, and as soon as you sign back in, you will be forced to the language of the country your account is based in.
I find this policy of Apple's to be truly repugnant and counter everything they've strived to stand for - but it seems it's here to stay, as they won't acknowledge nor fix it.
Apple's staff only point to:
http://support.apple.com/kb/HT2242
This will not fix the problem we've all been having since July.

How to change language in photoshop CC 2014 with rksskogo into English?

how to change language in photoshop CC 2014 with rksskogo into English?

go to your installed photoshop directory select locales folder "nl_NL" folder "support files" "tw10428.dat" rename to "tw10428.dat.old" press yes, and restart the tool again

[SOLVED] WRT300N change language?

Similar Messages

Maybe you are looking for