[SOLVED] wxpython update cause problems for playonlinux

After a recent update, playonlinux seems to get stuck in an endless loop during startup. The output in terminal is this:
Looking for python... 3.3.3 - skipped
Looking for python2.7... 2.7.6 - selected
Traceback (most recent call last):
File "mainwindow.py", line 34, in <module>
import wx, wx.aui
File "/usr/lib64/python2.7/site-packages/wx-3.0-gtk2/wx/__init__.py", line 45, in <module>
from wx._core import *
File "/usr/lib64/python2.7/site-packages/wx-3.0-gtk2/wx/_core.py", line 4, in <module>
import _core_
ImportError: /usr/lib64/python2.7/site-packages/wx-3.0-gtk2/wx/_core_.so: symbol _ZTI10wxListBase, version WXU_3.0 not defined in file libwx_baseu-3.0.so.0 with link time reference
Looking for python2.7... 2.7.6 - selected
Traceback (most recent call last):
File "mainwindow.py", line 34, in <module>
import wx, wx.aui
File "/usr/lib64/python2.7/site-packages/wx-3.0-gtk2/wx/__init__.py", line 45, in <module>
from wx._core import *
File "/usr/lib64/python2.7/site-packages/wx-3.0-gtk2/wx/_core.py", line 4, in <module>
import _core_
ImportError: /usr/lib64/python2.7/site-packages/wx-3.0-gtk2/wx/_core_.so: symbol _ZTI10wxListBase, version WXU_3.0 not defined in file libwx_baseu-3.0.so.0 with link time reference
This just keeps repeating until I end the process with Ctrl-c
The specific update that cause this is:
wxgtk
wxpython
wxgtk2.8
The wxgtk2.8 package was newly installed as certain packages require this version. Just to make sure, I removed wxgtk2.8, and downgraded wxgtk and wxpython, then playonlinux works without issue. Upgrading the system again causes this issue to appear again.
Edit: wxgtk upgrades from version 2.8.12.1-5 -> 3.0.0-2, and wxpython upgrades from version 2.8.12.1-4 -> 3.0.0.0-1
I have narrowed down the problem. Downgrading only wxpython to version 2.8.12.1-4 solves the problem.
Last edited by Daerandin (2014-01-12 02:32:41)

I'm on wxpython 3.0.0-2 and I'm still getting this issue, both on wxgtk 2.8.12.1-5 and 3.0.0-2.
And it might help to know that playonlinux depends on the package "wxgtk2.8" rather than wxgtk (and also wxpython2.8), which I can't install without borking my system and don't want to anyway because I use wxMupen64Plus, so I installed every other dep and -Sdd'd it.
EDIT: Scratch that, my error is actually similar but not the same:
Looking for python... 3.3.3 - skipped
Looking for python2.7... 2.7.6 - selected
Traceback (most recent call last):
File "mainwindow.py", line 32, in <module>
wxversion.select('2.8')
File "/usr/lib/python2.7/site-packages/wxversion.py", line 152, in select
raise VersionError("Requested version of wxPython not found")
wxversion.VersionError: Requested version of wxPython not found
And it has the exact same output for either version of wxgtk. I'd test it on wxpython2.8, but that depends on wxgtk2.8, which I can't install without either uninstalling important packages like audacity or forcing conflict overwriting. It also loops this error forever until I CTRL+C.
Last edited by Cadeyrn (2014-02-04 06:29:08)

Similar Messages

  • [solved] Some programs cause problems for sound in other programs.

    Today I noticed that audio has stopped working in some applications, but not others. The programs that I know where it doesn't work are:
    Hotline Miami (game)
    VLC
    Dungeons of Dredmor (game)
    Uplink (game)
    Programs where I know it works are:
    mplayer / smplayer (on the same files where vlc does not work)
    mpd
    Programs run through wine
    Standalone flash player and the firefox flash plugin
    Additionally, when I run a program where audio doesn't work, I have to restart programs where it does. For example, I'll pause mpd, open Hotline Miami, and then quit. When I try to unpause mpd, I'll get the error message "Failed to open audio output". But if I try a couple times, it will eventually resume. It's a similar situation for mplayer. I'll have to quit and restart mplayer a couple times after trying one of the other programs before audio will work.
    Further complicating the matter is that there are no error messages for the programs where audio does not work. I can't seem to track down the problem. I also don't do much with sound beyond using mpd and mplayer, so I don't know when this started.
    My hardware is a Lenovo IdeaPad z580 with integrated Intel HDA audio.
    EDIT: I just noticed that the problem is not what I thought. Part of the problem was simply due to volume. So I can get sound in the listed programs. However, running those programs does still cause the problem for the mplayer and mpd where I have to restart them.
    Last edited by mathfreak (2014-03-10 13:27:10)

    Gah. It does appear to have been a pulseaudio thing. I hadn't even realized it was installed, let alone running. I've fixed it. Thanks for the help! And thanks, brebs, for the asoundrc file. I think it'll help a lot.

  • Has the lastest security update caused problems for anyone else?

    Since the latest security update things have been a little weird with my MBP. Within 5 hours of udating the computer there were two kernal panics. At least I think the second one was a kernal panic. I had closed the lid and it wouldnt sleep or turn back on and it had no response to the power button or any keys so I eventually pulled the battery. Then on restart it acted as if recovering from a panic.
    Since then I have had other problems such as long waking time from sleep, dim screen after restarts, and itunes opening for no reason at all. After the latest restart things seem more 'normal.'
    Has anyone else had this problem? If it continues, what should I do?

    And here was I thinking it was my own imagination! After installing that annoying update, my MBP has not been the same.
    I also had two kernal panics exactly as you have described.
    My MBP seems to me to be extremely sluggish compared to what it was, and I am seriously condsidering reinstalling OS x and not installing that update.
    At one point I decided to run disk check and it said I needed to repair my hard drive, something about the actual size and recorded size being different, so I repaired that last night so I will have to see how that goes.
    I am very careful with my comp so i know that it is nothing I did that could cause thes problems.
    And of course to add another problem to the list, My battery life is nothing like it used to be. I am a college student and up until i installed that update i could easily go 4 hours in lecs using the laptop to take notes, but now after about half an hour the battery indicator says i have an hour left. It is very annoying!
    Mac Book Pro 15" 2ghz 1024mb RAM 100gb HD   Mac OS X (10.4.8)   Glossy Screen

  • HT204053 I have downloaded Lion onto my MacBook Pro.  My husband and I share a desktop.  Can download Lion onto the desktop from my Apple ID without causing problems for my husband's Apple ID use.

    I have downloaded Lion onto my MacBook Pro.  My husband and I share a desktop.  Can we download Lion onto the desktop from my Apple ID without causing problems for my husband's Apple ID use?

    Yes. In the future, however, only you will be able to update Lion because it will now require your Apple ID.

  • [svn] 863: Cleanup the jsp for some space issue that causes problem for proxy test on WAS .

    Revision: 863
    Author: [email protected]
    Date: 2008-03-19 11:39:05 -0700 (Wed, 19 Mar 2008)
    Log Message:
    Cleanup the jsp for some space issue that causes problem for proxy test on WAS. Update both trunk and 3.0.x branch.
    Modified Paths:
    blazeds/branches/3.0.x/qa/apps/qa-regress/remote/HttpXmlEchoService.jsp
    blazeds/trunk/qa/apps/qa-regress/remote/HttpXmlEchoService.jsp

    Revision: 863
    Author: [email protected]
    Date: 2008-03-19 11:39:05 -0700 (Wed, 19 Mar 2008)
    Log Message:
    Cleanup the jsp for some space issue that causes problem for proxy test on WAS. Update both trunk and 3.0.x branch.
    Modified Paths:
    blazeds/branches/3.0.x/qa/apps/qa-regress/remote/HttpXmlEchoService.jsp
    blazeds/trunk/qa/apps/qa-regress/remote/HttpXmlEchoService.jsp

  • Automatic page updates causing problems with your screen reader

    i want to know whats going on with this Automatic page updates causing problems with your screen reader and yahoo does not work and in order for me to even email you for this question i have to use internet exp I have found this complaint many times in the forum but with no real answer how to fix the dang thing will you please tell us what your doing about this problem and or do we have to go back to using internet exp there are more sights than yahoo that no longer work with mozilla please let us no what is bieng done about this problem if any thing
    == URL of affected sites ==
    http://
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.0; Trident/4.0; SearchToolbar 1.1; Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1) ; SLCC1; .NET CLR 2.0.50727; Media Center PC 5.0; .NET CLR 3.5.30729; .NET CLR 3.0.30729; eMusic DLM/4; OfficeLiveConnector.1.4; OfficeLivePatch.1.3; InfoPath.3; .NET4.0C; AskTB5.8)

    Try Refresh Blocker: https://addons.mozilla.org/firefox/addon/992

  • Does adding V-Card to signature cause problems for Outlook (Windows) users?

    Hi -
    I want to add a V-Card to my signature in Apple Mail (by drag and drop from address book to signature pane in Mail>Preferences).  I have read that, in the past, this can caused problems for some recipients who use Windows Outlook.
    Is this still the case?  If so, how can I add a V-Card to my signature without causing problems for recipients?
    Thanks -
    Doug

    I take note of your WNLB recommendation but in this case the error start on one of the CAS server first and client connected to the CAS that does not have any errors continue to work as normal.
    I upgraded to SP3 late last year.  This problem first happened in Feb 2014.
    Have you checked the DNS settings on the VM - yes, and both of them are pointing to one of our DC's.
    I would set the client with a Host file to just one CAS to rule out the WNLB - this would be too hard
    to manage as when the issue happens again it could happen on CAS1 but the client could be connected to CAS2 so it wont experience the issue.
     

  • Does any one know about the small Hardrive that "The Power Company" is producing, sponsored by Indiegogo, for small Apple mobile devices (iPhones, iPods, etc,).  Do they work or cause problems for the device or iCloud storage?

    Does any one about the small hard drive that "the Power Company" is bringing out as a crowdsourced project by Indiegogo?  Does it work, does it cause problems for IOS, iPOD Touch or iCloud?

    I have not heard that mentioned here before. What does the Indiegogo page say?

  • Automatic page updates causing problems with your screen reader? this kind of message come when i access yahoo mail.yahoo mail page not come properly.

    Automatic page updates causing problems with your screen reader? this kind of message come when i access yahoo mail.yahoo mail page not come properly.i can't chat,compose mail nothing accessing.

    Try Refresh Blocker: https://addons.mozilla.org/firefox/addon/992

  • Firmware Update 1.7 drains battery and causes problems for sound

    I have a Macbook Pro early 2011 with a SSD. After installing Firmware 1.7 I saw the beach ball over and over even after rebooting... this problem got resolved after I plugged in power cable and is now gone even when it is running on battery. But the sound of my MBP goes randomly on/off when I plug in/out my headphones and the worst problem is that prior to the 1.7 I got up to 5 hours of battery but now only 2:30 hours. I've only 470 cycles of my battery. Resseting the SMC didn't help and unfortuaneltly there is no way of downgrading the firmware. What should I do?? This is definietly a firmware problem which supposedly was released to solve a rare battery problem on some machines not to cause problems on others.

    I am seeing this problem as well.
    Before the SMC Update 1.7 the battery was fine. After, it hibernated within a half hour of use on battery. Upon wake-up the Service Battery warning is in the battery menu, and the time remaining calculation has gone from several hours at a full charge to less than 10 minutes.
    My battery is original MacBookPro8,2; I rarely work on battery, relying on it mostly to keep my computer going while asleep during a half hour commute to/from work. System Information's Power tab reports
    Cycle Count:          19
    I plan to try a battery calibration soon; if that fails, then the Apple Store.
    e

  • HW acceleration (direct2d) causes problems for my site , is there a script to disable it automatically?

    direct2d acceleration on FF4 causes really bad font rendering problems for my site.
    Text goes on to of each other and behind pictures making it impossible to read for some parts. Disabling HW acceleration fixes the problem. Is there a script that I could use to disable it automatically for my site?

    In fact updating my graphics was the cause of the problem. With the old drivers there were no problems. It depends on the system. So far I've tested on 6 Windows PC's. on 2 of them it worked fine. My site should be 100% W3C compliant. It works fine on 3.6, Chrome, IE and Opera

  • Java 6 update caused problems

    Hi,
    I installed the recently released Java 6 in G5 (PPC-base MAC) and Leopard 10.5.8.
    After I did it, I realized that the update is only for intel-based MAC.
    But there was no warning message during the installation, though.
    I got many problems on java side for using Eclipse java and MATLAB.
    I checked that the default Java is shown to be 1.5 in Java preference app and "java -version", but installation tweaked some system files, which causes all these issues.
    Is there any way to go back to the status before I did the java 6 update?
    I would greatly appreciate it if some of you could suggest some possible ways to tackle this problem.
    Thanks,

    Restore from your Time Machine backup. Alternatively, don't do anything because release 5 was for any machine running 10.5.8 according to http://www.apple.com/downloads/macosx/apple/application_updates/javaformacosx105 update5.htmland since I installed it on the G4.

  • Pages update causes problems?

    Since April's update I have had problems with Pages. Templates keep opening with the 'cannot find font' message even though the font is activated. Since I use Font Explorer to manage fonts I tried moving the fonts into the system folder/font folder. Pages still could not find them. After deleting Pages and Keynote and reinstalling them from my CD all is happy again.
    My impression is that the update caused the problems. Anybody else experiencing this?
    Kurt

    Hullo Kurt:
    Glad you got it sorted. Didn't think it would help you much without further insight - but I had no trouble with the update either. One of those things you had to persevere with on the system you know to fix.
    I recall that when I first installed OsX, there was a font collection called "Classic." It was not of fonts the designers call "classic", so I assume it was carried over from Os9, even though I hadn't installed that.
    You can collate whatever collections you want from Pages, as you know: just so long as they go into the User or System Library fonts. I don't know how it is with Font Explorer, but with Font Book I find the safest way of resolving duplicates so they don't keep reappearing is to "resolve duplicates" first for any black-dotted fonts, then scan for the greyed out versions where they appear. These can be safely "removed" via Font Book.
    This way Pages can choose which copy of a font it doesn't need.
    BTW I've just updated to OsX 10.4.7. Can't put it on my profile yet. But it reproduces type throughout the system, and especially in Pages, even more snappily than before, and is said to improve Font Book's handling - as well as some PDF problems.
    Be interesting to see whether those are the ones that members have had trouble with. MacFixit suggests that this system update can cause problems with various duplicate files, but I started with a clean computer, left it alone for the update, and did a Safe Boot to see what that cleaned out before I bothered with all that, and then I found no need for it. Routine maintenance did turn up quite a few permissions to be repaired though.
    OTOH, if the system details on your profile are right, you might do better to look for a combo update on Mac Downloads to be sure you get it all stitched.
    Cheers.
    Mac OsX 10.4.7, never mind what it says under here.

  • IOS 8.0.2 update causing problems with wifi connectivity..please help

    latest update having problems ...please help..!!!!!!!!!!

    Just a quick snapshot of my chain of events.  I’m currently on my fourth iPhone 6 Plus 64GB here in London, UK. Every time I have spoken to AppleCare and told them that I have gone through all the Wi-Fi troubleshooting methods possible they have asked me to get a brand new retail replacement as I’m within my 14 day return period.  I’ve been experiencing the following issues:
    Wi-Fi disconnects and switches to 4G (Restart required for temp fix)
    Wi-Fi is still active but there is no traffic or activity– often when in sleep mode for long periods of time.  (Toggle Wi-Fi on/off for temp fix)
    Wi-Fi disconnects and cannot find any networks (restart required for temp fix)
    This has been occurring on both iOS 8 and 8.0.2
    The issues are the same on both my 2.4Ghz and 5Ghz networks
    This is affecting my ip6+ and 5s (5s used to work perfect on ios7 on same networks) – My MBP-R and all other devices run perfectly on my network.
    I spoke to AppleCare again yesterday and asked for their advice as its now my fourth iPhone in just under a month. This time they said that apple were fully aware of the Wi-Fi problem and that new repair tickets were not being raised for their engineers as they are already working hard to get this resolved. They also said they could see all the issues raised on the apple discussions boards which they usually don’t admit too! I asked what to do next and the advisor apologised and said this is clearly a software glitch and will be resolved in the next update. I asked for a timescale but unfortunately none was given.
    As stated above I have tried all the troubleshooting methods discussed on forums and on tech websites but the only thing that gives me a stable connection without any disconnects (especially on my 6 plus) is turning cellular/mobile data off when I know I’m going to be on Wi-Fi for a sustained period of time (e.g. at home or work). I appreciate this is annoying but it’s the best temp fix until an update comes out.
    Hope it helps everyone who is having issues with their devices that have cellular functionality.
    Any comments welcome

  • Firmware update caused problems with HBD-N790W

    Latest firmware update caused my DVD Blu Ray Home Theater to lose the ability to find internet video content.  The unit shows that the 12/19 update was successful.  I can access the internet and get web browser content--so there isn't anything wrong with my wireless web connection.  My unit shows the connection to the internet is working.  I made a YouTube video about it:https://www.youtube.com/watch?v=9nqYNNVPcBA&list=UUNQaJbjyKQwFlZXY6832mIA   The set-up feature does not work and I lost my video channels (Netflix, Amazon).  I don't really understand why my connection to the internet works, my wireless works...everything works except getting updated media channels.  I have tried plugging and unplugging cable, modem, wireless, unit,  for ten minutes many times.  I reconnect the unit to the web...get buttons that say that internet content can be updated...press the button...then the Sony logo and it stops there.

    Hi, i work for a Service center for  walmart and bestbuy and  i have been getting this model in for  service for awile now,    after  a firmware update   the systems have reported to work good till there turned off the first time and then they dont book up all the way,   you will get a   Sony logo at top left screen and the  Blue   Bluray Logo in the center of the tv screen    and thats it,  no menu functions     the  controls on the player it self   flash on and off slowly   you can turn the system on and off with the remote but thats it,    this looks like a failed firmware update  but there seems to be no way to reflash these even with the firmware you can get from the sony site  you have to burn a CDR disk  but  becuse there is no menu you cant get that far,   i have 19  of these units stacked up  5 have been replaced with  other brands to make customers happy,  the rest on still in wait for a fix,    its looking like replacement of main board  will be  the next step in this night mare.     if  sony tech wants to shine some lite on this now i would be very  gratefull.    Thanks    Chris R. 

Maybe you are looking for