[SOLVED] X Server not accepting remote connections after update

Hi everyone! After recent upgrade Xorg on my laptop not allows other machines to use him as a window server, just an example:
on laptop:
vitaly@trifon:~/VM$ ps aux | grep Xorg
root       499  2.7  1.3 393628 105276 tty7    Ssl+ фев17 139:48 /usr/lib/xorg-server/Xorg -br -novtswitch -quiet :0 vt7 -auth /var/run/xauth/A:0-rfwYma
vitaly   23338  0.0  0.0  10728  2272 pts/3    S+   08:01   0:00 grep --color=auto Xorg
As you can see, '-nolisten tcp' flag is absent.
vitaly@trifon:~/VM$ xhost
access control enabled, only authorized clients can connect
INET:192.168.2.2
INET:192.168.13.13
192.168.2.2 is my Virtual machine, which works perfectly before upgrade
if I try to start some graphics program, I see that:
[sandbox@sandbox ~]$ DISPLAY=192.168.2.1:0.0 xterm
xterm: Xt error: Can't open display: 192.168.2.1:0.0
Please tell me how can I let my server work?
Last edited by Trifon (2015-02-21 14:38:14)

No good results
first i scanned 6000 port, it was closed. i scanned random ports, all was "closed" too
Nmap done: 1 IP address (1 host up) scanned in 0.22 seconds
[sandbox@sandbox ~]$ nmap -p6000 192.168.2.1
Starting Nmap 6.47 ( http://nmap.org ) at 2015-02-21 12:53 MSK
Nmap scan report for 192.168.2.1
Host is up (0.00025s latency).
PORT     STATE  SERVICE
6000/tcp closed X11
Nmap done: 1 IP address (1 host up) scanned in 0.08 seconds
[sandbox@sandbox ~]$ nmap -p1234 192.168.2.1
Starting Nmap 6.47 ( http://nmap.org ) at 2015-02-21 12:53 MSK
Nmap scan report for 192.168.2.1
Host is up (0.00024s latency).
PORT     STATE  SERVICE
1234/tcp closed hotline
Nmap done: 1 IP address (1 host up) scanned in 0.07 seconds
[sandbox@sandbox ~]$ nmap -p5731 192.168.2.1
Starting Nmap 6.47 ( http://nmap.org ) at 2015-02-21 12:54 MSK
Nmap scan report for 192.168.2.1
Host is up (0.00029s latency).
PORT     STATE  SERVICE
5731/tcp closed unknown
Nmap done: 1 IP address (1 host up) scanned in 0.08 seconds
But scan result on working machine tells me that 6000 port is open (Debian Wheezy, dist-upgrade done yesterday, xorg-server was updated and restarted)
vitaly@trifon:/usr/lib/xorg-server$ nmap 192.168.X.X
Starting Nmap 6.47 ( http://nmap.org ) at 2015-02-21 11:29 MSK
Nmap scan report for 192.168.X.X
Host is up (0.14s latency).
Not shown: 996 closed ports
PORT     STATE SERVICE
22/tcp   open  ssh
111/tcp  open  rpcbind
6000/tcp open  X11
6881/tcp open  bittorrent-tracker
Last edited by Trifon (2015-02-21 09:58:23)

Similar Messages

  • Regarding mountain lion server: clients experience intermittent service connections. the server system log has the following error- Client handshake failed (6):113: Server not accepting client connections (any ideas???)

    regarding mountain lion server: clients experience intermittent service connections. the server system log has the following error- Client handshake failed (6):113: Server not accepting client connections. any suggestions would be greatly appreciated - thank you

    Hi Jason
    I was getting the same behavior after Apple support had me delete some plist files to get Airplay going. I was also getting the following error:
    the error occurred while processing a command of type 'writesettings' in the plug-in 'server vpn'
    I went into ~/Library/Preferences/ and /Library/Preferences/ and deleted every plist contating the word server. I had to re-set up my server (meaning walk through some intial steps) but all of my settings were still there after that and everything started working again.
    Just a thought, obviously try at your own risk but it worked for me.
    Kellen

  • Apple pay not accepting apple ID after update.

    After updating to iOS 8.1 my apple ID password is not working with Apple Pay.  After entering it for the 4th time it says that the password is incorrect and then says there is an error loading apple pay. 

    I'm having the same problem. If I try to add a credit card in the Passbook app it will not accept my AppleID password. The same thing happens if I try adding a card in Settings > Passbook & Apple Pay.
    I have verified that my password is correct by logging in to https://appleid.apple.com with it.

  • [SOLVED] Some text not rendering in Gnome after update

    After a recent update some text is not rendering in Gnome. For example, look at the url bar of chromium in this screenshot: http://i.imgur.com/A2Qyw.png
    Here's a "screenshot" of some text not rendering in gnome-terminal:
    $ echo -e "I like pizza\nI like pizza\nI like pizza"
    ...blank line...
    ...blank line...
    ...blank line...
    ...blank line...
    It basically renders my desktop environment worthless. I don't see anything suspicious in /var/lob/Xorg.0.log. Here are some of the packages I've updated recently:
    [2012-05-10 23:05] Running 'pacman -Suy'
    [2012-05-10 23:05] synchronizing package lists
    [2012-05-10 23:05] starting full system upgrade
    [2012-05-10 23:06] upgraded pygobject-devel (3.2.0-2 -> 3.2.1-1)
    [2012-05-10 23:06] upgraded python2-gobject (3.2.0-2 -> 3.2.1-1)
    [2012-05-12 10:49] Running 'pacman -Suy'
    [2012-05-12 10:49] synchronizing package lists
    [2012-05-12 10:49] starting full system upgrade
    [2012-05-12 10:55] upgraded cairo (1.10.2-3 -> 1.12.2-1)
    [2012-05-12 10:55] upgraded openssl (1.0.1.b-1 -> 1.0.1.c-1)
    [2012-05-12 10:55] upgraded git (1.7.10.1-1 -> 1.7.10.2-1)
    [2012-05-12 10:55] upgraded java-jline (1.0-1 -> 1.0-2)
    [2012-05-12 10:55] upgraded kmod (8-1 -> 8-2)
    [2012-05-12 10:55] upgraded libpulse (1.1-4 -> 2.0-1)
    [2012-05-12 10:55] upgraded libusb-compat (0.1.3-2 -> 0.1.4-1)
    [2012-05-12 10:55] upgraded libxi (1.6.0-1 -> 1.6.1-1)
    [2012-05-12 10:55] upgraded man-pages (3.39-1 -> 3.40-1)
    [2012-05-12 10:55] upgraded mpfr (3.1.0.p7-1 -> 3.1.0.p10-1)
    [2012-05-12 10:55] installed webrtc-audio-processing (0.1-1)
    [2012-05-12 10:55] upgraded pulseaudio (1.1-4 -> 2.0-1)
    [2012-05-12 10:55] upgraded taglib (1.7.1-1 -> 1.7.2-1)
    [2012-05-12 10:55] upgraded xorg-server-common (1.12.1-1 -> 1.12.1-2)
    [2012-05-12 10:55] upgraded xorg-server (1.12.1-1 -> 1.12.1-2)
    I'm not running [testing]. I don't know which of the two recent upgrades introduced the regression, but I'm guessing it was the one with all the xorg stuff...
    Any ideas what's going on here? Thanks!
    Last edited by mitch_feaster (2012-05-13 04:01:08)

    Here's what I upgraded lately:
    [2012-04-30 09:02] upgraded automake (1.11.5-1 -> 1.12-1)
    [2012-04-30 09:02] upgraded libxfce4util (4.8.2-1 -> 4.10.0-1)
    [2012-04-30 09:02] upgraded xfconf (4.8.1-1 -> 4.10.0-1)
    [2012-04-30 09:02] upgraded libxfce4ui (4.8.1-1 -> 4.10.0-1)
    [2012-04-30 09:02] upgraded exo (0.6.2-3 -> 0.8.0-1)
    [2012-04-30 09:02] upgraded fuse (2.8.7-1 -> 2.9.0-1)
    [2012-04-30 09:02] upgraded garcon (0.1.12-1 -> 0.2.0-1)
    [2012-04-30 09:02] upgraded vim-runtime (7.3.495-2 -> 7.3.495-3)
    [2012-04-30 09:02] upgraded gvim (7.3.495-2 -> 7.3.495-3)
    [2012-04-30 09:02] upgraded libcanberra (0.28-2 -> 0.28-3)
    [2012-04-30 09:02] upgraded libxfcegui4 (4.8.1-4 -> 4.10.0-1)
    [2012-04-30 09:02] upgraded xfce4-panel (4.8.6-1 -> 4.10.0-1)
    [2012-04-30 09:02] upgraded orage (4.8.3-1 -> 4.8.3-2)
    [2012-04-30 09:02] upgraded terminal (0.4.8-1 -> 0.4.8-2)
    [2012-04-30 09:02] upgraded thunar (1.2.3-5 -> 1.4.0-1)
    [2012-04-30 09:02] upgraded thunar-media-tags-plugin (0.2.0-1 -> 0.2.0-2)
    [2012-04-30 09:02] upgraded thunar-volman (0.6.1-1 -> 0.8.0-1)
    [2012-04-30 09:03] upgraded ttf-dejavu (2.33-2 -> 2.33-3)
    [2012-04-30 09:03] upgraded upower (0.9.15-1 -> 0.9.15-3)
    [2012-04-30 09:03] upgraded xfburn (0.4.3-5 -> 0.4.3-6)
    [2012-04-30 09:03] upgraded xfce4-appfinder (4.8.0-2 -> 4.10.0-1)
    [2012-04-30 09:03] upgraded xfce4-session (4.8.3-1 -> 4.10.0-3)
    [2012-04-30 09:03] upgraded xfce4-battery-plugin (1.0.1-1 -> 1.0.1-2)
    [2012-04-30 09:03] upgraded xfce4-clipman-plugin (1.2.3-1 -> 1.2.3-2)
    [2012-04-30 09:03] upgraded xfce4-cpufreq-plugin (1.0.0-2 -> 1.0.0-3)
    [2012-04-30 09:03] upgraded xfce4-cpugraph-plugin (1.0.1-3 -> 1.0.2-1)
    [2012-04-30 09:03] upgraded xfce4-datetime-plugin (0.6.1-2 -> 0.6.1-3)
    [2012-04-30 09:03] upgraded xfce4-dev-tools (4.9.1-1 -> 4.10.0-1)
    [2012-04-30 09:03] upgraded xfce4-dict (0.6.0-2 -> 0.6.0-3)
    [2012-04-30 09:03] upgraded xfce4-diskperf-plugin (2.5.1-1 -> 2.5.2-1)
    [2012-04-30 09:03] upgraded xfce4-eyes-plugin (4.4.1-2 -> 4.4.1-3)
    [2012-04-30 09:03] upgraded xfce4-fsguard-plugin (1.0.0-2 -> 1.0.0-3)
    [2012-04-30 09:03] upgraded xfce4-genmon-plugin (3.3.1-1 -> 3.3.1-2)
    [2012-04-30 09:03] upgraded xfce4-mailwatch-plugin (1.1.0-4 -> 1.1.0-5)
    [2012-04-30 09:03] upgraded xfce4-mixer (4.8.0-2 -> 4.8.0-3)
    [2012-04-30 09:03] upgraded xfce4-mount-plugin (0.6.3-1 -> 0.6.3-2)
    [2012-04-30 09:03] upgraded xfce4-mpc-plugin (0.4.0-1 -> 0.4.0-2)
    [2012-04-30 09:03] upgraded xfce4-netload-plugin (1.1.0-1 -> 1.1.0-2)
    [2012-04-30 09:03] upgraded xfce4-notes-plugin (1.7.7-3 -> 1.7.7-4)
    [2012-04-30 09:03] upgraded xfce4-notifyd (0.2.2-2 -> 0.2.2-3)
    [2012-04-30 09:03] upgraded xfce4-power-manager (1.0.11-2 -> 1.2.0-1)
    [2012-04-30 09:03] upgraded xfce4-quicklauncher-plugin (1.9.4-6 -> 1.9.4-7)
    [2012-04-30 09:03] upgraded xfce4-screenshooter (1.8.0-2 -> 1.8.0-3)
    [2012-04-30 09:03] upgraded xfce4-sensors-plugin (1.2.3-4 -> 1.2.3-5)
    [2012-04-30 09:03] upgraded xfce4-settings (4.8.3-2 -> 4.10.0-1)
    [2012-04-30 09:03] upgraded xfce4-smartbookmark-plugin (0.4.4-1 -> 0.4.4-2)
    [2012-04-30 09:03] upgraded xfce4-systemload-plugin (1.1.0-1 -> 1.1.0-2)
    [2012-04-30 09:03] upgraded xfce4-timer-plugin (0.6.4-1 -> 0.6.4-2)
    [2012-04-30 09:03] upgraded xfce4-verve-plugin (1.0.0-2 -> 1.0.0-3)
    [2012-04-30 09:03] upgraded xfce4-wavelan-plugin (0.5.10-2 -> 0.5.10-3)
    [2012-04-30 09:03] upgraded xfce4-weather-plugin (0.7.4-2 -> 0.7.4-3)
    [2012-04-30 09:03] upgraded xfce4-xkb-plugin (0.5.4.3-1 -> 0.5.4.3-2)
    [2012-04-30 09:03] upgraded xfdesktop (4.8.3-2 -> 4.10.0-1)
    [2012-04-30 09:03] upgraded xfwm4 (4.8.3-1 -> 4.10.0-1)
    [2012-04-30 09:03] upgraded xfwm4-themes (4.6.0-2 -> 4.10.0-1)
    [2012-04-30 13:59] upgraded inetutils (1.9.1-1 -> 1.9.1-2)
    [2012-04-30 13:59] upgraded libical (0.46-2 -> 0.48-1)
    [2012-04-30 13:59] upgraded libusb (1.0.8-2 -> 1.0.9-1)
    [2012-04-30 14:00] upgraded linux (3.3.3-1 -> 3.3.4-1)
    [2012-04-30 14:00] upgraded mdadm (3.2.3-1 -> 3.2.3-2)
    [2012-04-30 14:00] upgraded openssh (6.0p1-1 -> 6.0p1-2)
    [2012-04-30 14:00] upgraded xfce4-artwork (0.1-7 -> 0.1.1a_git20110420-1)
    [2012-04-30 14:00] upgraded xfce4-power-manager (1.2.0-1 -> 1.2.0-2)
    [2012-05-01 10:42] upgraded chromium (18.0.1025.162-1 -> 18.0.1025.168-1)
    [2012-05-01 10:42] upgraded imagemagick (6.7.6.5-1 -> 6.7.6.8-1)
    [2012-05-01 10:42] upgraded libldap (2.4.30-1 -> 2.4.31-1)
    [2012-05-01 10:42] upgraded upower (0.9.15-3 -> 0.9.16-1)
    [2012-05-01 10:42] upgraded xfce4-battery-plugin (1.0.1-2 -> 1.0.2-1)
    [2012-05-01 10:42] upgraded xfdesktop (4.10.0-1 -> 4.10.0-2)
    [2012-05-02 20:01] upgraded bzip2 (1.0.6-3 -> 1.0.6-4)
    [2012-05-02 20:01] upgraded dconf (0.12.0-1 -> 0.12.1-1)
    [2012-05-02 20:01] upgraded e2fsprogs (1.42.2-1 -> 1.42.2-2)
    [2012-05-02 20:01] upgraded syslog-ng (3.3.4-5 -> 3.3.5-1)
    [2012-05-03 07:24] upgraded binutils (2.22-6 -> 2.22-7)
    [2012-05-03 07:24] upgraded linux (3.3.4-1 -> 3.3.4-2)
    [2012-05-03 07:24] upgraded xfce4-screenshooter (1.8.0-3 -> 1.8.1-1)
    [2012-05-03 07:24] upgraded xfce4-settings (4.10.0-1 -> 4.10.0-2)
    [2012-05-03 07:24] upgraded xfdesktop (4.10.0-2 -> 4.10.0-3)
    [2012-05-03 18:21] upgraded libcanberra (0.28-3 -> 0.28-4)
    [2012-05-03 18:21] upgraded mercurial (2.1.2-1 -> 2.2-1)
    [2012-05-04 05:51] upgraded babl (0.1.6-1 -> 0.1.10-1)
    [2012-05-04 05:51] upgraded gtk3 (3.4.1-1 -> 3.4.2-2)
    [2012-05-04 05:52] upgraded ttf-freefont (20100919-2 -> 20120503-1)
    [2012-05-04 20:58] upgraded nss (3.13.4-1 -> 3.13.4-2)
    [2012-05-04 20:58] upgraded flashplugin (11.2.202.233-1 -> 11.2.202.235-1)
    [2012-05-04 20:58] upgraded xfce4-artwork (0.1.1a_git20110420-1 -> 0.1.1a_git20110420-2)
    [2012-05-05 10:57] upgraded attr (2.4.46-1 -> 2.4.46-2)
    [2012-05-05 10:57] upgraded acl (2.2.51-1 -> 2.2.51-2)
    [2012-05-05 10:57] upgraded zlib (1.2.6-1 -> 1.2.7-1)
    [2012-05-05 10:57] upgraded consolekit (0.4.6-2 -> 0.4.6-3)
    [2012-05-05 10:57] upgraded udev (182-1 -> 182-2)
    [2012-05-05 10:57] upgraded device-mapper (2.02.95-2 -> 2.02.95-4)
    [2012-05-05 10:57] upgraded filesystem (2012.2-4 -> 2012.2-5)
    [2012-05-05 10:57] upgraded gegl (0.1.8-2 -> 0.2.0-1)
    [2012-05-05 10:57] upgraded gimp (2.6.12-1 -> 2.8.0-1)
    [2012-05-05 10:57] upgraded gnome-keyring (3.4.1-1 -> 3.4.1-2)
    [2012-05-05 10:57] upgraded initscripts (2012.03.2-1 -> 2012.04.1-1)
    [2012-05-05 10:57] upgraded libcap (2.22-2 -> 2.22-3)
    [2012-05-05 10:57] upgraded libjpeg-turbo (1.2.0-1 -> 1.2.0-2)
    [2012-05-05 10:57] upgraded libwbclient (3.6.4-2 -> 3.6.5-1)
    [2012-05-05 10:57] upgraded linux-firmware (20120227-1 -> 20120227-2)
    [2012-05-05 10:57] upgraded lvm2 (2.02.95-2 -> 2.02.95-4)
    [2012-05-05 10:57] upgraded mdadm (3.2.3-2 -> 3.2.3-3)
    [2012-05-05 10:57] upgraded mercurial (2.2-1 -> 2.2.1-1)
    [2012-05-05 10:57] upgraded mkinitcpio (0.8.7-2 -> 0.8.8-1)
    [2012-05-05 10:57] upgraded pam (1.1.5-2 -> 1.1.5-3)
    [2012-05-05 10:57] upgraded smbclient (3.6.4-2 -> 3.6.5-1)
    [2012-05-05 10:57] upgraded sysfsutils (2.1.0-7 -> 2.1.0-8)
    [2012-05-05 10:57] upgraded usbmuxd (1.0.7-2 -> 1.0.7-3)
    [2012-05-05 10:57] upgraded v4l-utils (0.8.6-1 -> 0.8.8-1)
    [2012-05-05 10:57] upgraded xfsprogs (3.1.8-1 -> 3.1.8-2)
    [2012-05-06 10:05] upgraded initscripts (2012.04.1-1 -> 2012.05.1-1)
    [2012-05-06 10:05] upgraded unrar (4.1.4-2 -> 4.2.1-1)
    [2012-05-06 19:49] upgraded bash (4.2.024-2 -> 4.2.028-1)
    [2012-05-07 07:37] upgraded pygobject2-devel (2.28.6-5 -> 2.28.6-6)
    [2012-05-07 07:37] upgraded python2-gobject2 (2.28.6-5 -> 2.28.6-6)
    [2012-05-07 07:38] upgraded texlive-bin (2011.3-5 -> 2011.3-6)
    [2012-05-08 07:36] upgraded libpurple (2.10.3-2 -> 2.10.4-1)
    [2012-05-08 07:36] upgraded pidgin (2.10.3-2 -> 2.10.4-1)
    [2012-05-08 19:03] upgraded cifs-utils (5.3-2 -> 5.4-1)
    [2012-05-08 19:04] upgraded libmysqlclient (5.5.23-1 -> 5.5.24-1)
    [2012-05-08 19:04] upgraded ntfs-3g (2012.1.15-2 -> 2012.1.15-3)
    [2012-05-08 21:05] upgraded me-tv (1:1.3.6-1 -> 1:1.4.0.9-1)
    [2012-05-09 06:36] upgraded gcc-libs (4.7.0-5 -> 4.7.0-6)
    [2012-05-09 06:36] upgraded gcc (4.7.0-5 -> 4.7.0-6)
    [2012-05-09 06:36] upgraded gmp (5.0.4-1 -> 5.0.5-1)
    [2012-05-09 06:36] upgraded isl (0.09-1 -> 0.09-2)
    [2012-05-09 20:05] upgraded chromium (18.0.1025.168-1 -> 18.0.1025.168-2)
    [2012-05-09 20:05] upgraded glib2 (2.32.1-3 -> 2.32.2-2)
    [2012-05-09 20:05] upgraded linux (3.3.4-2 -> 3.3.5-1)
    [2012-05-09 20:05] upgraded qtcreator (2.4.1-1 -> 2.5.0-1)
    [2012-05-10 06:28] upgraded libcups (1.5.2-1 -> 1.5.2-2)
    [2012-05-10 06:28] upgraded cups (1.5.2-1 -> 1.5.2-2)
    [2012-05-10 06:28] upgraded ffmpeg (20120317-1 -> 20120509-1)
    [2012-05-12 09:12] upgraded libpulse (1.1-4 -> 2.0-1)
    [2012-05-12 09:12] upgraded libusb-compat (0.1.3-2 -> 0.1.4-1)
    [2012-05-12 09:12] upgraded mpfr (3.1.0.p7-1 -> 3.1.0.p10-1)
    [2012-05-12 09:12] upgraded openssl (1.0.1.b-1 -> 1.0.1.c-1)
    [2012-05-12 17:02] upgraded cairo (1.10.2-3 -> 1.12.2-1)
    [2012-05-12 17:02] upgraded kmod (8-1 -> 8-2)
    [2012-05-12 17:02] upgraded man-pages (3.39-1 -> 3.40-1)
    [2012-05-12 17:02] upgraded taglib (1.7.1-1 -> 1.7.2-1)
    [2012-05-12 17:02] upgraded xorg-server-common (1.12.1-1 -> 1.12.1-2)
    [2012-05-12 17:02] upgraded xorg-server (1.12.1-1 -> 1.12.1-2)
    [2012-05-12 20:52] upgraded libxi (1.6.0-1 -> 1.6.1-1)
    [2012-05-12 20:52] upgraded xfce4-genmon-plugin (3.3.1-2 -> 3.4.0-1)
    [2012-05-12 22:28] upgraded libvpx (1.0.0-1 -> 1.1.0-1)
    [2012-05-13 08:33] upgraded gtk3 (3.4.2-2 -> 3.4.3-1)
    [2012-05-13 08:37] upgraded libxi (1.6.1-1 -> 1.6.0-1)
    [2012-05-13 08:40] upgraded libxi (1.6.0-1 -> 1.6.1-1)
    [2012-05-13 09:40] upgraded cairo (1.12.2-1 -> 1.10.2-3)
    I suspected libxi first but a downgrade did not resolve the problem. So you may very well be correct by connecting this to the xserver. I'm using nouveau by the way.

  • [SOLVED] Archlinux does not boot any more after update

    Hi all,
    yesterday I decided to update my Archlinux system again after postponing the updates for some weeks.
    In general I update anything except kernel stuff, but this did lead to some dependency problems recently,
    so I decided to make a full upgrade now via pacman.
    After restarting the system, the kernel refused to boot. It told me, that it couldn't find my root partition /dev/sdc1 and left
    me in an almost useless recovery shell. The error was:
    ERROR: Unable to determine major/minor number of root device /dev/sdc1
    Has anyone an idea, what might have happened? I had to install Ubuntu into a free partition to post this
    topic. The disks and partitions are okay, I managed to "boot" using the old kernel, but of course the system
    remained useless in that case due to wrong kernel module versions.
    Thanks in advance for any hint, how to proceed.
    Cheers, Zmann
    Last edited by Zmann (2012-06-02 20:56:39)

    Hi all,
    thanks for the quick replies and sorry for the delay (children prioritized :-)
    Yes, I'm using an older SATA controller (more or less 6 years), so the problem might be related to what you posted.
    I was not able to boot the old fallback kernel, same error message. The fallback kernel simply uses a different initrd
    file, perhaps I should think about a more sophisticated approach.
    Nevertheless I already checked the file /etc/mkinitcpio.conf and it did not contain a hook called autodetect. So maybe
    the mkinitcpio won't help anyway? Should I prefer using the suggested LTS kernel instead? I assume, this is done by booting
    using an archlinux CD, then chroot and using pacman? Maybe it's sufficient to chroot from the currently running ubuntu instead?
    Or will the booted kernel have any influence to mkinitcpio or the like?
    Cheers, Zmann

  • SQL Server Express 2008 no longer accepting remote connections

    Last night our SQL Server Express 2008 (running on Windows 2003 server) stopped accepting remote connections. 
    1. We restarted the SQL Server -- no resolution.
    2. We rebooted the host Windows 2003 server - no resolution.
    3. telnet localhost 1433: says Could not open connection to the host on port 1433... connection failed.
    4. netstat -an indicates that the server is not listening on port 1433
    5. SQL Server Network Configuration -> Protocols for SQLEXPRESS2008A -> (properties) -> TCP-IP (enabled), Listen All (yes)
    6. SQL Native Client 10.0 Configuration -> Client Protocols -> (properties) TCP-IP (enabled), Default port (1433)
    Fragment from the server error log:
    2014-03-26 08:50:41.09 Server      A self-generated certificate was successfully loaded for encryption.
    2014-03-26 08:50:41.11 Server      Server is listening on [ 'any' <ipv4> 1026].
    2014-03-26 08:50:41.11 Server      Server local connection provider is ready to accept connection on [ \\.\pipe\SQLLocal\SQLEXPRESS2008A ].
    2014-03-26 08:50:41.11 Server      Server named pipe provider is ready to accept connection on [ \\.\pipe\MSSQL$SQLEXPRESS2008A\sql\query ].
    2014-03-26 08:50:41.11 Server      Dedicated administrator connection support was not started because it is disabled on this edition of SQL Server. If you want to use a dedicated administrator connection, restart SQL Server using the
    trace flag 7806. This is an informational message only. No user action is required.
    2014-03-26 08:50:41.11 Server      The SQL Server Network Interface library could not register the Service Principal Name (SPN) for the SQL Server service. Error: 0x54b, state: 3. Failure to register an SPN may cause integrated authentication
    to fall back to NTLM instead of Kerberos. This is an informational message. Further action is only required if Kerberos authentication is required by authentication policies.
    2014-03-26 08:50:41.11 Server      SQL Server is now ready for client connections. This is an informational message; no user action is required.
    2014-03-26 08:50:41.29 spid10s     Clearing tempdb database.
    2014-03-26 08:50:41.89 spid10s     Starting up database 'tempdb'.
    2014-03-26 08:50:42.09 spid13s     The Service Broker protocol transport is disabled or not configured.
    2014-03-26 08:50:42.09 spid13s     The Database Mirroring protocol transport is disabled or not configured.
    2014-03-26 08:50:42.14 spid13s     Service Broker manager has started.
    2014-03-26 08:50:42.14 spid7s      Recovery is complete. This is an informational message only. No user action is required.
    2014-03-26 08:50:53.48 spid51      Attempting to load library 'xpstar.dll' into memory. This is an informational message only. No user action is required.
    2014-03-26 08:50:53.48 spid51      Using 'xpstar.dll' version '2007.100.1600' to execute extended stored procedure 'xp_enumerrorlogs'. This is an informational message only; no user action is required.
    2014-03-26 08:51:35.68 spid54      Starting up database 'Web TimeSheet2'.
    2014-03-26 08:51:38.47 spid54      Recovery is writing a checkpoint in database 'Web TimeSheet2' (6). This is an informational message only. No user action is required.
    Note: the lines referring to xpstar.dll is new after this porblem.  Previous logs do not have this,Any help will be appreciated.

    Hi,
    >>Server is listening on [ 'any' <ipv4> 1026].
    Your sql server is not listening on default port 1433 but on 1026.When you connect to instance like hostname\instancename you should specify post no also.
    like hostname\instancename ,1026
    Can you try this.Makes sure TCP/IP and named pipes protocol is enabled
    Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

  • Remote device will not accept the connection

    Oh Windows 8...
    I've been having computer issues for a while now, but I always figured it was the application I was using to access the internet. I first noticed an issue when trying to log into World of Warcraft. There was an obvious connection issue, but I could still
    connect to my account. I contacted Blizzard about it, and nothing they told me to do helped me. This has been going on for nearly a month. Today, after not playing for a couple days, I realized I couldn't access the game at all. I blamed Blizzard again, and
    became frustrated with them because none of their solutions ever helped me.
    Today, instead of playing WoW, I tried to play Sims 4, which requires you to launch Origin, an application that uses the internet. Origin wouldn't let me connect either. A similar error to the one I experienced with World of Warcraft and its starter program
    (BattleNet) appeared. Again, I blamed the provider of the application.
    Still bored, I tried launching Steam, yet another gaming application that requires internet use. No, yet again I received a similar error to the other two. By now I figured it was an issue with the computer itself. I launched a connection test and it told
    me that the "Remote device or resource will not accept the connection".
    I tried launching Internet Explorer. I got the message that the "proxy server is not responding". I'm beyond frustrated. Thank god I also have Firefox installed, so here I am.
    I looked up possible solutions to my issue. All the possible solutions I've found are only about Internet Explorer, and none of those solutions have helped anyone else with my issue.
    So I guess it's on your end here. I have no use for this computer at all at this point. Help me out, please. I just recently bought this computer and I don't want to have to purchase another one to get away from Windows/Microsoft.

    Hi,
    This issue can be caused by proxy settings or malware.
    I suggest you to disable proxy settings. Follow these steps:
    Under "Tools" in the browser tool bar select "Internet Options".
    In the "Internet Options" window that pops up, click the "Connections" tab at the top.
    Click "LAN Settings" near the bottom of the "Connections" section.
    If the "Proxy server" checkbox is marked with a check, click it to deselect/uncheck it.
    Click "Ok" to close the "Local Area Network (LAN) Settings" window.
    Click "Ok" to close the "Internet Options" window.
    Now check if you are able to connect to Internet Explorer.
    You can download and run the Windows Malicious Removal Tool from the below mentioned link and run it on your computer:
    http://www.microsoft.com/security/pc-security/malware-removal.aspx
    Hope these could be helpful.
    Kate Li
    TechNet Community Support

  • An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider,

    An error has occurred while establishing a connection to the server.  When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider,
    error: 40 - Could not open a connection to SQL Server)

    An error has occurred while establishing a connection to the server.  When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named
    Pipes Provider, error: 40 - Could not open a connection to SQL Server)
    Hello,
    Make sure your SQL Server service is started.
    Make sure TCP\IP and names pipes protocol is enabled
    Make sure you have made an exception in firewall for SQL Server connection
    Make sure SQL Server browser service is enabled
    Make sure you connect with correct name hostname\instance name for named instance,MSSQLSERVER for default instance and Hotname\SQLEXPRESS for express edition.
    Please make sure you use port no when connecting to SQL server listeing on different port (hostname\instance ,portno)
    http://blogs.msdn.com/sql_protocols/archive/2006/09/30/SQL-Server-2005-Remote-Connectivity-Issue-TroubleShooting.aspx
    Hope this helps
    Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

  • Iphone not appears at Itunes after updating to ios 6.0.2 and I cannot switch on Iphone - there's only "connect USB to Itunes" icon shown. What should I do?

    iphone not appears at Itunes after updating to ios 6.0.2 and I cannot switch on Iphone - there's only "connect USB to Itunes" icon shown. What should I do?

    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...

  • HT204368 I am having trouble pairing my iPhone4 with bluetooth device. It was connected but is not able to connect after both devices were shut and then switched on, as per Apple instructions. phone does find any bluetooth device closeby. how to fix?

    I am having trouble pairing my iPhone4 with bluetooth device. It was connected but is not able to connect after both devices were shut and then switched on, as per Apple instructions. phone does find any bluetooth device closeby. how to fix?

    NovaRiddle wrote:
    I am having trouble pairing my iPhone4 with bluetooth device. ...
    Depends on the device...
    Have a look here for Supported Bluetooth Profiles
    http://support.apple.com/kb/HT3647

  • Not accept my simcard after download ios 6 in my iphone 3gs

    pls help me.. my iphone 3gs is not accept my simcard after download ios 6.0.1.. it asked to configurer in internet bt in left of the corner showed no service.. how to get back my iphone without format any apps, msgs,photos,songs,contacts in all details

    Contact the carrier to which it was locked before it was hacked, and enquire if they will unlock it.  Not all carriers offer unlocking and those that do usually have requirements such as that you are a current or former customer in good standing.

  • I have a problem with the device does not accept 5 slot after work and survey content is not possible activation of the device and iTunes

    I have a problem with the device does not accept 5 slot after work and survey content is not possible activation of the device and iTunes imei: 01******206
    <Personal Information Edited by Host>

    لدي جهاز ترقفت الشبكه ويعطي جاري البحث وتم تحديثه ولم يتم حل المشكلهة  والان الجهاز لايقبل التنشيط والايتونز لايتعرف عليه امل تنشيطه 013619004986206

  • Apple tv not accepting itunes password after i changed it on the computer

    Apple tv not accepting itunes password after i changed it on my mac. Mac opening itunes account with that password

    I don't have Apple TV, but are you able to log out of your account on it and then log back in with the new password so as to 'refresh' the account on it ?

  • I had been using iMessage all along with my friend who is using an iPhone 6. I choose to send a sms to him as I do not have any connection, after that there is no way I can send him an iMessage again. Can anyone advise how do I switch back?

    I had been using iMessage all along with my friend who is using an iPhone 6. I choose to send a sms to him as I do not have any connection, after that there is no way I can send him an iMessage again. Can anyone advise how do I switch back? I had tried resetting the network setting, toggling off the sms but to no avail.
    Thank you.
    Regards

    What do you mean you choose to send him an SMS because you don't have any connection. What kind of connection? Delete the thread with that individual that you sent via SMS, and as long as you have iMessage activated on your device and your friend has an active data connection, it should recognize that and send as an iMessage. Another scenario is to have the friend send you a message that you can respond to.

  • I now get an 500 Internal Server error when loading Firefox, after updating RealPlayer

    I now get an 500 Internal Server error when loading Firefox, after updating RealPlayer.
    When I try to open Firefox, it opens. But there is the error message.
    What is this? How do I did rid of it?
    '''bold text'''

    Clear the cache and the cookies from sites that cause problems.
    * "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    * "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Appearance/Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]
    You can also check the connection settings in Tools > Options > Advanced : Network : Connection<br />
    If you do not need to use a proxy to connect to internet then select "No Proxy"
    See "Firefox connection settings":
    * [[Firefox cannot load websites but other programs can]]

Maybe you are looking for

  • Is this normal temperatures after 1 minute of gaming?

    Hi HP. I just want to know if this is normal temperatures after about 1 minute of gaming? 

  • Photoshop CC Extensions menu is not selectable

    Photoshop CC Extensions menu is greyed out. I cannot select event that menu. The extensions installed successfully in Extension Manager CC, no errors. I even tried uninstalling and trying just 1... no dice. I've reinstalled Extension Manager CC witho

  • Error in activating CCLM BW in Solman_setup

    Hi, I am trying to activate custom code managment through Solman_setup. The first step is to activate BW for custom code management. I tried all options like manual check in rsa for activation & everything seems ok. But still when I execute BW activa

  • Formatting Error When Editing Pause Length

    Okay, so I build a lot of Workflows based on relative time, so one action takes place, then say 1 a minute later another will start. Perhaps sounds a little odd but works great for the things I need it for. Until I upgraded to Leopard that is. Now ev

  • Help!  iOS 4.1 update deleted calendar

    Just updated to 4.1 and now my exchange calendar is missing. My exchange email and contacts have shown up but not calendar. Is anyone having a similar issue?