[SOLVED] Zabbix installation blocked - PHP database support missing?

Hello everyone!
I'm trying to install zabbix following the wiki (the mysql version: zabbix-server-mysql from AUR),
on a working LAMP server (up to date).
The package installs, but when I try to take the last steps of the installation (from http://localhost/my_zabbix_installation),
on page two (Check of pre-requisites) it marks:
"PHP databases support off Fail"
according to php, mysql support is enabled. (extension=mysql.so is commented out in /etc/php/php.ini)
What can cause this?
Last edited by scar (2014-08-05 16:16:47)

It is not bug. Read PHP extensions
uncommet in file /etc/php/php.ini
extension=mysqli.so

Similar Messages

Hello i have been trying to install i tunes 10 on to my pc but as i get to the end of installation it comes up with the message windows installer package failed contact support or vendor how do i solve this im running vista of an acer laptop many thanks

hello i have been trying to install i tunes 10 on to my pc but as i get to the end of installation it comes up with the message windows installer package failed contact support or vendor how do i solve this im running vista of an acer laptop many thanks

Let's try the following user tip with that one:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

SAP IDES ECC5.0 (SQL 2005 Database) installation Error at Database instan.

At the time IDES ECC 5.0 installation (SQL 2005 database), I was copy all DVD on Hard drive and start setup then at installation of database instance, following Errors are occured. so I cant continue with the installation, if anyone have installation guide/or solve the following error please mail me at [email protected]
from Log file SAPCLUST
Interface access functions from dynamic library dbmssslib.dll loaded.myCluster
(3.5.Imp): 613: error when retrieving table description for physical table AABLG.
myCluster (3.5.Imp): 614: return code received from nametab is 32
myCluster (3.5.Imp): 296: error when retrieving physical nametab for table AABLG.
(CNV) ERROR: code page conversion failed
rc = 2
from sappool.log
Interface access functions from dynamic library dbmssslib.dll loaded.failed to read short nametab of table ARCH_NUM (rc=32)conversion failed for row 0 of table VARKEY = ⁘
(CNV) ERROR: code page conversion failed
So please send me solution/ or any configuration need for SQL 2005 / installation guide thanks

This may be hard disk problem, some file not able to write on HDD.
Regards
Rajnish

Is duplicate from active database supported in Standard Edition?

Hi,
I'm trying to clone a database whithout a staging area.
After having the clone instance and the sql*net configuration set up, I'm running this
command in the rman-commandline:
Recovery Manager: Release 11.1.0.7.0 - Production on Tue Nov 2 15:52:31 201
Copyright (c) 1982, 2007, Oracle. All rights reserved.
connected to target database: LOCALDB (DBID=370732657)
connected to auxiliary database: LOCALFB (not mounted)
RMAN> run {
duplicate target database to localfb from active database
pfile=C:\Oracle\admin\ProdFB\pfile\init.ora
db_file_name_convert=('PROD', 'ProdFB')
logfile group 1 ('C:\OraData\ProdFB\Redo/log01A.dbf','C:\OraData\ProdFB\log01B.dbf') size 100m,
group 2 ('C:\OraData\ProdFB\Redo/log02A.dbf','C:\OraData\ProdFB/log02B.dbf') size 100m,
group 3 ('C:\OraData\ProdFB\Redo/log03A.dbf','C:\OraData\ProdFB/log03B.dbf') size 100m;
Starting Duplicate Db at 02.11.10
using target database control file instead of recovery catalog
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID=594 device type=DISK
contents of Memory Script:
set newname for datafile 1 to
"C:\ORADATA\PRODFB\TS\SYSTEM01.DBF";
set newname for datafile 2 to
"C:\ORADATA\PRODFB\TS\SYSAUX01.DBF";
set newname for datafile 3 to
"C:\ORADATA\PRODFB\TS\UNDO01.DBF";
set newname for datafile 4 to
"C:\ORADATA\PRODFB\TS\PRODFB01.DBF";
set newname for datafile 5 to
"C:\ORADATA\PRODFB\TS\PIMAINT01.DBF";
set newname for datafile 6 to
"C:\ORADATA\PRODFB\TS\INDX01.DBF";
backup as copy reuse
datafile 1 auxiliary format
"C:\ORADATA\PRODFB\TS\SYSTEM01.DBF" datafile
2 auxiliary format
"C:\ORADATA\PRODFB\TS\SYSAUX01.DBF" datafile
3 auxiliary format
"C:\ORADATA\PRODFB\TS\UNDO01.DBF" datafile
4 auxiliary format
"C:\ORADATA\PRODFB\TS\PRODFB01.DBF" datafile
5 auxiliary format
"C:\ORADATA\PRODFB\TS\PIMAINT01.DBF" datafile
6 auxiliary format
"C:\ORADATA\PRODFB\TS\INDX01.DBF" ;
sql 'alter system archive log current';
executing Memory Script
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
Starting backup at 02.11.10
released channel: ORA_AUX_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 11/02/2010 15:52:46
RMAN-03015: error occurred in stored script Memory Script
RMAN-06181: multiple channels require Enterprise Edition
RMAN>
As you can see, I get the error RMAN-06181.
So my question is: is duplication from active database supported in the standard edition?
If it is, then what do I need th do to make this work?
Thanks for your help.

Yes, this is it.
I tested only three cases before:
- not allocating any channel
- allocating local channel only
- allocating auxiliary channel only
I need to allocate both channels in the run block, then it works.
Thanks a lot for your help.
run {
allocate channel c1 device type disk;
allocate auxiliary channel c2 device type disk;
duplicate target database to localfb from active database
pfile=C:\Oracle\admin\ProdFB\pfile\init.ora
db_file_name_convert=('PROD', 'ProdFB')
logfile group 1 ('C:\OraData\ProdFB\Redo/log01A.dbf','C:\OraData\ProdFB\Redo/log01B.dbf') size 100m,
group 2 ('C:\OraData\ProdFB\Redo/log02A.dbf','C:\OraData\ProdFB\Redo/log02B.dbf') size 100m,
group 3 ('C:\OraData\ProdFB\Redo/log03A.dbf','C:\OraData\ProdFB\Redo/log03B.dbf') size 100m;
using target database control file instead of recovery catalog
allocated channel: c1
channel c1: SID=580 device type=DISK
RMAN-06908: WARNING: operation will not run in parallel on the allocated channels
RMAN-06909: WARNING: parallelism require Enterprise Edition
allocated channel: c2
channel c2: SID=591 device type=DISK
Starting Duplicate Db at 04.11.10
:

SAP Database Support

Dear all,
Please tell me can SAP support MS- SQL Standard Edition? or It should be Enterprise edition
Also provide me link where i can get list of DATABASE supported by sap
Regards
Amol

amol_dounde30 wrote:
HI gudide,
>
> Thanks for reply,
>
> Actually our org. using MS SQL ENT Edition & now they want to remove ENT EDITION & want to install STANDARD EDITION
>
> I am lil worried abut, can data upload from ent edition to std edition & will it work. ?
>
> hence i am asking will sap support for std edition
>
> Regards
> Amol
Hello,
MS SQL Server Enterprise Software is the supported one.
First check with service.sap.com/pam to verify the support version (2000/2005/2008R2). Then check with Installation Guides for SAP, there you will see only the database software required is Enterprise Edition.
Thanks

How to solve disabled textbox (insert to database)

hi all,
i want to insert value from textbox to database...why when my textbox disabled that value can't insert to database(i'm using micromedia dreamwear to create screen)...how to solve it....

I'm missing something. Where's the Java connection here? Thanks.
(also, the Macromedia folks, makers of Dreamweaver would be pissed to see you calling them "micromedia" and the product dreamwear)

Installation package is not supported by this processor type error while installing SqlSysClrTypes.msi in windows 7

Hi Team,
I am trying to restore/design few SSRS reports in my PPS Dashboard Designer 2013. On my process I got the error "Failed to load the appropriate report editor" and to rectify it I tried installing the SqlSysClrTypes.msi on my machine (32 bit). But
while installing, got the error "The Installation package is not supported by this processor type". kindly help me in getting link for downloading the correct version on the add-on.
Thanks,
-Arsath

Try below msi
http://download.microsoft.com/download/B/6/3/B63CAC7F-44BB-41FA-92A3-CBF71360F022/1033/x86/SQLSysClrTypes.msi
http://social.technet.microsoft.com/Forums/lync/en-US/dab8767e-92a0-4cee-aad8-1e216084acfa/getting-error-on-installation-of-sqlclrtypemsi-on-windows-server-2008-r2-64-bit-machine?forum=ocsclients
install the sqlsysclrtype.msi for sql server 2012
http://stackoverflow.com/questions/14991693/created-msi-but-get-installation-package-is-not-supported-by-this-processor-type
If this helped you resolve your issue, please mark it Answered

"The language of this installation package is not supported by your system" Error Message when installing Office 2010

Hello, I am having a very hard time attempting to install Office 2010 Pro Plus on a system. The error message that I receive is as follows:
The language of this installation package is not supported by your system.
I have tried running the Microsoft FixIt tool to remove any traces of Office 2007 and Office 2010. Also, I have followed the instructions in
KB928218 to manually uninstall any traces of Office 2007.
I believe the user had both Office 2007 and Office 2010 installed previously. There is no article to remove all traces of Office 2010.
Here is some additional output from the Setup log:
Parsing setup.xml file: F:\Access.en-us\setup.xml
Error: Installation of this product requires operating system supplemental language support. Type: 54::NoSupportedCulture.
Error: Installation of this product requires operating system supplemental language support. Type: 54::NoSupportedCulture.
Error: Installation of this product requires operating system supplemental language support. Type: 54::NoSupportedCulture.
Showing parent-less message Title: 'Setup Error', Message: 'The language of this installation package is not supported by your system.
I have tried both running setup from a disc and a network share. I am completely stumped and have been trying to get this to load for hours now. Thanks in advance for any advice!

Hi,
Thank you for contacting Excel IT Pro Discussions Services.
From your description, I understand that you encountered the following error when trying to install Office 2010:
"The language of this installation package is not supported by your system"
If there is any misunderstanding, please feel free to let me know.
Please check if this blog helps:
http://blogs.technet.com/b/jks/archive/2009/04/23/how-to-fix-the-error-the-language-of-this-installation-package-is-not-supported-by-your-system-during-office-products-installation.aspx
If anything is unclear or if there is anything I can do for you, please feel free to let me know.
Best Regards,
Sally Tang

Is there a limit on the size of the input for the Solve Linear Equations block?

Hello,
I'm trying to figure out why the Solve Linear Equations block will properly function with some sets of data and why it won't with others. What my program is doing is taking a signal and comparing it with a batch of sine and cosine waves to try and pick out patterns in the data. I have different sample sizes and it seems to work when I throw 3900 points at it. However, I have another set with 4550 points and it gives me incorrect amplitudes for my sinusoids. Is there some limit to the size of the matrices that I can give this block? Or is there some other workaround that still allows me to keep all of my data?
Thanks,
David Joseph

Well, the best way to show what I expect is to see the entire program. It's pretty evident that when looking at the graphs, something isn't right. What is supposed to happen is that the runout amplitudes are found, and then those sinusoids are subtracted from the initial data, leaving tooth to tooth data and noise. When I use the larger arrays, it seems as though not all of the data gets through (count the peaks on the product gear runout graph vs. initial) and the amplitudes are much to small, such that nothing is really taken out and the tooth to tooth data looks like the initial data.
Also, we will also be using an FFT, but it will be limited to only determining the frequencies we should check. I've fought with the fft blocks quite a bit and I just prefer to not use them. Plus, the guy I'm writing this for wants exact answers and does not want to pad or resample the data or use windows.
The exact number of data points isn't important (ie. 4550 vs 4551) since I use the array size block to index the for loop.
As for typical values, they can change a lot based on materials. But, the original 3900 data point sets and the 4550 data point sets used practically identical gears. So, use the original 3900 sets I've included as references (check the RO array block numbers to compare).
I've included 3 3900 samples, 3 4550 samples, and 3 4550 samples that have been truncated to 3900 or so as constants on the block diagram.
Also, the check for additional runouts (like 3 per rev, 4 per rev, etc..) is optional, but if you choose to use it, use positive integers only.
I don't know how much of this program will make sense and I have wires running everywhere.. so good luck. Keep in mind I'm only a student and I hadn't touched Labview until about 2 or 3 months ago.
Thanks,
David Joseph
Attachments:
Full example.vi ‏139 KB

Hi, While installing XQuatrz-2.7.7, the installation blocks at the "destination" level. It asks how to install this soft, "Install for all users" is shadowed, but frozen: i cannot select anything and move on. Any idea how to get that fixed? Thanks!

Hi,
While installing XQuatrz-2.7.7, the installation blocks at the "destination" level. It asks how to install this soft, "Install for all users" is shadowed, but frozen: i cannot select anything and move on. Any idea how to get that fixed?
Thanks!

It says above 2 relevant and 1 correct answere available .............
I'm new here so could anyone direct me to these answeres?

Third Party Database Support in SQL Developer

As a rule I don't (blatantly) advertise my blog on this forum, but I have just had feedback from my recent posting which made realize you might not have stumbled on this new functionality. i.e. Third Party Database Support in SQL Developer. 
In the Evaluation Release 3 (1.1.0.22.71) you can connect to and browse MySQL and SQL Server databases. The Getting Started document on OTN, does mention where to get the jdbc drivers and briefly, how to set it up in SQL Developer. This blog entry takes that a step further.
If you have access to either of these databases, please take a whirl and see what you think. For production you will also be able to connect to an MS Access database.
Regards 
Sue

The great thing, as you see from Donal's reply, is that other teams can take advantage of SQL Developer's framework, so we have a few teams working on extensions to SQL Developer and the product benefits from the work they do.
From the SQL Developer team's side, we have logged and fixed bugs for 8i support in 1.1. since the last evaluation drop, so when you get the next drop for SQL Developer, you should be able to browse more objects using 8i. Also I have logged further 8i bugs and will continue to have more fixed. This is an ongoing project. We also have a number of features that need to be added to support current releases and try to give these a high priority. So the team is focused on addressing as many requests as we can for supported features.
We know we have many customers on unsupported databases and would like to support them too, having said that, we have run a poll on this forum for ages and have had 7.5% (22) responses for databases lower than 9.x. It's a small poll, but based on all our feedback we believe we have the right focus.
Regards
Sue

Need Help with IMG+PHP Database+Selective Display

The problem is really a lot simpler than I made it sounds to
be, though I fear the answer might be vice versa.
I need to have pictures appear when they exist. That's all.
Here is where I am at:
I have created a php database for a news announcement page.
In that database, I have a column named "img" whose default value
is "null"
Whenever I actually have a picture corrosponding to a
particular news, the "img" column will change to the file name of
that image, which I will then extract.
So basically... if news A, img = null... no picture. news B
img = b... then yes picture. very simple concept for database.
Here's what I can't do.
When I read the database from DW, how can I make it so that
when it reads a "null" it won't insert a picture and vice versa? I
figure it definitely has to do with the "if" statement (duh...)
I know how to make text do that effect...
<? if $row_data['text'] != null
echo("i have data");
?>
but how do i do it with an image? I tried putting the image
tag to replace the entire "echo" line, but that's apparently not
how you do it. I tried putting it inside "echo", but that doesn't
seem to be it either.
also, as a premise, all pictures are associated with only 1
particular news.
which i wrote something similar to this:
<img src="<?php echo $row_data['img']; ?>.jpg"
width="200" height="200" />
Um, basically... I need THAT to fit into the IF statement. So
thanks in advance.

if (!is_null($row_data['img']))
echo '<img src="',$row_data['img'],'.jpg" width="200"
height="200" />';
Let's break that down into the following:
echo '<img src="' ;
echo $row_data['img'] ;
echo '.jpg" width="200" height="200" />' ;
When you string multiple echoes together use a comma between
them,. so now
we have:
echo '<img src="',$row_data['img'],'.jpg" width="200"
height="200" />';
(You may also use a period, but my understanding is the
period is less
efficient.)
I only have single quotes in my PHP statements. The double
quotes you see
are part of what will be the rendered HTML.
You may generally use the single quote or double quote
interchangeably with
few exceptions such as having double quotes as part of the
text or vice
versa among others. You can probably escape the characters
too, but lets
keep this simple for now.
If I misspoke I am sure Micha will be sure to correct me.
IMO The best thing to do is learn by trial and error, and
your best resource
on the net for PHP is probably the php website. www.php.net
"Bih Wang" <[email protected]> wrote in
message
news:gr3p0m$293$[email protected]..
> thanks so much!
>
> is how i interpret the code correct?
>
> if (!is_null($row_data['img'])) ---> if img is false
> echo <--- maybe i been using this without
understanding it correctly...
> echo
> means to display on screen but not limited to text
right?
>
> and the rest is where you lost me... i don't get the
punctuations
>
> bracket double quote (" is for text right?
> so single quote ' means to accept a php function or html
code?
>
> so can i do this?
> '<div bob>blah'
> and have div bob appear only when the conditions are
met?
>
> and external data is define by comma?
> such as... if i pre-define value "x"
> so i can do img src=',x,'.jpg?
>
> thanks again! is there a tutorial i can read for these?
>
>

Problem in Execute query on non-database block and database block together

Hi All,
In my form,i have
1. First block is Non-database block with one non-database item.
2. Second and third blocks are database blocks.
Now the problem is that i want to perform execute-query for all the blocks.
If the cursor is on the non-database item of 1st block and i clicks on the "Enter-query" then i am getting message " This function can not be performed here".
If i click on the item of the database block and then clicks on the "Enter-query" and then "execute-query" it's working fine.
But i don't want to do in this way.
My cursor will be on the First block only and then it should perform execute-query.
I am using this non-database item to copy value of this item to the item of the database block item.
I think i make you understand about my problem.
I am using forms 10g on Window xp.
Please help me.

Hi!
Simply create a enter-query trigger on the non-database-block:
begin
go_block ( 'database_block' );
enter_query;
end;If your search criteria is in the non-database-item in the first block,
you actually do not need the enter_query build-in.
Just create a execute-query trigger on the first block like:
begin
go_block ( 'database_block' );
execute_query;
go_item ( :System.trigger_item );
end;And in a pre-query trigger on the database-block copy the
value of your seach item into the item you want to search for.
Regards

Dose Logical Standby Database support sdo_georaster type?

Hello everyone,
Dose Logical Standby Database support sdo_georaster type?

ylin wrote:
Hello everyone,
Dose Logical Standby Database support sdo_georaster type?in 10g no - http://download.oracle.com/docs/cd/B19306_01/server.102/b14239/data_support.htm#CHDDCCIG

MySQL 4.0 & smallworld database supported in PI 7.1.1?

Hi All,
I have two questions, but both related in JDBC adapter:
1. Is mySQL 4.0 is still supported in PI 7.1.1?
2. Is Small World Database supported in PI 7.1.1?
Would be great if you can share any link.
Cheers,
Rahul

MySql is usually supported on PI 7.11, but i'm not sure that also the release 4.0 is supported.
Here are the parameters:
Driver Class: com.mysql.jdbc.Driver
URL: jdbc:mysql://<host>:<port3306>/<database>
You can download the MySQL Drivers depending on your version from:
http://dev.mysql.com/downloads/connector/j/
The file you need to deploy is mysql-connector-java-3.1.10.jar
Becareful to select the right version of the driver.
Relating to SmallWorldDatabase... i really don't know!

[SOLVED] Zabbix installation blocked - PHP database support missing?

Similar Messages

Maybe you are looking for