Some I/O problems, need help!

problem 1:
i have a file a.txt
content of a.txt
12 13 15 ...integer
and i want to use an string array to store each integer
, how to know the proper size of the array to store them?
problem 2:
How do I write an integer array to a file b.txt
like this format:
13 15 16.....so on

You should use a LinkedList instead of an array so you can resize it when u need to...
I've modified the code from the other Thread...
import java.io.*;
import java.util.LinkedList;
public class Test
     private static BufferedReader b;
     private static FileWriter f;
     private static String s;
     private static LinkedList l;
     public Test()
     public static void main(String args[])
          try
               b = new BufferedReader(new FileReader("a.txt"));
               s = new String();
               l = new LinkedList();
               f = new FileWriter("b.txt");
          catch(IOException io)
          try
               while((s = b.readLine()) != null)
                    l.add(s);
          catch(IOException io)
          for(int i = 0;i < l.size();i++)
               try
                    s = ((String)l.get(i)) + "\n";
                    f.write(s,0,s.length());
                    f.flush();
               catch(IOException io)
}Andrew

Similar Messages

  • Zen Vision:M problem, NEED HELP!

    My zen vision:m is starting to run slowly. It started right after my player froze and i reset it.Now its really slow and barely even switches screens sometimes.Right now its just a black screen with the keypad lit up.Whats wrong with it'sI NEED HELP!

    johnnnyp wrote:
    hi, i have a problem with my creative vision m. i wanted to watch a movie and it froze. i tried to shut it down but it wouldnt respond, and now is frozen. please help me if you can!
    You know its kinda rude to derail XBenzinoFla thread with your own problems, make your own thread next time.
    But to the both of you especially XBenzinoFla, try putting your ZVM in rescue mode and run scan disk to see if it hel
    ps.

  • Zen Micro problem need help

    Today i was listening to music and my zen micro just froze while playing and no buttons could be pressed and the lock button wasnt on. So i took the battery out and rebooted the player but it froze at the creative screen. I went home and i went to recovery mode and tried to reload the firmware but it said erasing firmware for more than 2 hours. So then i tried a format but it said formating for the same amount of time. I need help please. Also, recently i've had problems witht the headphone jack. When ever i would stick it in it would sound distorted and i would have to move it around until i got it to a certain spot to hear it good again. If anyone else has this problem please tell me. One more thing i had returned my other micro zen in for hard dri've probems and this was my new one do u think if i have to return in (hopefully not) that they would accept it.

    If the functions in Rescue Mode aren't working properly then you need to contact Creative Support.

  • Still stuck with the same old producer consumer weight problem need help

    Hello All,
    This is the problem I am stuck with right now.
    I have two array lists one producer array list and one consumer array list denoted by a and b
    P1 P2 P3 P4 P5
    5 6 7 8 9
    C1 C2 C3 C4 C5
    2 3 4 5 6
    Now we find all those producer consumer pairs which satisfy the criteria Pi>=Ci
    We have the following sets
    (5,2)(6,2)(7,2),(8,2),(9,2)
    (5,3)(6,3)(7,3),(8,3),(9,3)
    (5,4)(6,4)(7,4),(8,4),(9,4)
    (5,5)(6,5)(7,5),(8,5),(9,5)
    (6,6)(7,6)(8,6),(9,6)
    Let us done each of them with Si
    so we have S1,S2,S3,S4,S5
    we assign a third parameter called weight to each element in Si which has satisfied the condition Pi>=Ci;
    so we we will have
    (5,2,ai),(6,2,bi),(7,2,ci)....etc for S1
    similarly for S2 and so on.
    We need to find in each set Si the the pair which has the smallest weight.
    if we have (5,2,3) and (6,2,4) then 5,2,3 should be chosen.We should make sure that there is only one pair in every set which is finally chosen on the basis of weight.
    Suppose we get a pair (5,2,3) in S1 and (5,2,3) in S2 we should see that (5,2,3) is not used to compare to compare with any other elements in the same set S2,
    Finally we should arrive at the best element pair in each set.They should be non repeating in other sets.
    Given a problem
    P0 P1 P2 P3 P4
    9 5 2 2 8
    6 5 4 5 3
    C0 C1 C2 C3 C4
    we have So as (P0,C0) and (P4,C0)
    assuming that the one with the smaller index has lesser weight PO is selected.In the program I have used random weights.from set S1 we select the pair PO,CO
    S1 =(P0,C1),(P1,C1) and (P4,C1)
    since P0 and P4 are already used in previous set we dont use them for checking in S1 so we have (P1,C1) as best.
    S2=(P0,C2),(P1,C2) and (P4,C2) so we dont use P0,C2 and P1 and C2 because PO and P1 are already used in S1.
    So we choose P4,C2
    in S3 and S4 ae have (P0,C3),(P1,C3),(P4,C3) so we dont choose anything
    and same in S4 also.
    So answer is
    (P0,C0),(P1,C1) and (P4,C2).
    My program is trying to assign weights and I am trying to print the weights along with the sets.It doesnt work fine.I need help to write this program to do this.
    Thanks.
    Regards.
    NP
    What I have tried till now.
    I have one more question could you help me with this.
    I have an array list of this form.
    package mypackage1;
    import java.util.*;
    public class DD
    private  int P;
    private  int C;
    private int weight;
    public void set_p(int P1)
    P=P1;
    public void set_c(int C1)
    C=C1;
    public void set_weight(int W1)
    weight=W1;
    public int get_p()
    return P;
    public int get_c()
    return C;
    public int get_x()
    return weight;
    public static void main(String args[])
    ArrayList a=new ArrayList();
    ArrayList min_weights_int=new ArrayList();
    ArrayList rows=new ArrayList();
    ArrayList temp=new ArrayList();
    Hashtable h=new Hashtable();
    String v;
    int o=0;
    DD[] d=new DD[5];
    for(int i=0;i<4;i++)
    d=new DD();
    for(int i=0;i<4;i++)
    d[i].set_p(((int)(StrictMath.random()*10 + 1)));
    d[i].set_c((int)(StrictMath.random()*10 + 1));
    d[i].set_weight(0);
    System.out.println("Producers");
    for(int i=0;i<4;i++)
    System.out.println(d[i].get_p());
    System.out.println("Consumers");
    for(int i=0;i<4;i++)
    System.out.println(d[i].get_c());
    System.out.println("Weights");
    for(int i=0;i<4;i++)
    System.out.println(d[i].get_x());
    for(int i=0;i<4;i++ )
    int bi =d[i].get_c();
    ArrayList row=new ArrayList();
    for(int j=0;j<4;j++)
    if( d[j].get_p() >=bi)
    d[j].set_weight((int)(StrictMath.random()*10 + 1));
    row.add("(" + bi + "," + d[j].get_p() + "," +d[j].get_x() + ")");
    else
    d[j].set_weight(0);
    row.add("null");
    rows.add(row);
    System.out.println(rows);
    int f=0;
    for(Iterator p=rows.iterator();p.hasNext();)
    temp=(ArrayList)p.next();
    String S="S" +f;
    h.put(S,temp);
    String tt=new String();
    for(int j=0;j<4;j++)
    if(temp.get(j).toString() !="null")
    // System.out.println("In if loop");
    //System.out.println(temp.get(j).toString());
    String l=temp.get(j).toString();
    System.out.println(l);
    //System.out.println("Comma matches" + l.lastIndexOf(","));
    //System.out.println(min_weights);
    f++;
    for(Enumeration e=h.keys();e.hasMoreElements();)
    //System.out.println("I am here");
    int ii=0;
    int smallest=0;
    String key=(String)e.nextElement();
    System.out.println("key=" + key);
    temp=(ArrayList)h.get(key);
    System.out.println("Array List" + temp);
    for( int j=0;j<4;j++)
    String l=(temp.get(j).toString());
    if(l!="null")
    System.out.println("l=" +l);
    [\code]

    In your example you selected the pair with the greatest
    distance from the first set, and the pair with the least
    distance from the second. I don't see how the distance
    function was used.
    Also it's not clear to me that there is always a solution,
    and, if there is, whether consistently choosing the
    furthest or the closest pairs will always work.
    The most obvious approach is to systematically try
    all possibilities until the answer is reached, or there
    are no possibilities left. This means backtracking whenever
    a point is reached where you cannot continue. In this case
    backtrack one step and try another possibility at this
    step. After all possible choices of the previous step,
    backtrack one more step and so on.
    This seems rather involved, and it probably is.
    Interestingly, if you know Prolog, it is ridiculously
    easy because Prolog does all the backtracking for you.
    In Java, you can implement the algorithm in much the same
    way as Prolog implementations do it--keep a list of all the
    choice points and work through them until success or there
    are none left.
    If you do know Prolog, you could generate lots of random
    problems and see if there is always a solution.

  • Ipod problem NEED HELP ASAP

    Hello guys,my ipod touch has battery problems and internal speaker are not working and will apple replace me a new one,i even have 1 year warranty and i want a new ipod touch white instead of black<<<plz plz plz reply ASAP plz really need HELP!THANK YOU

    If you iPod is defective, in warranty and not abused Apple will replace it with a refurbished one.  They may or may not replace it with the white one.  You will have to ask.
    Other users have asked the same question but I hav never heard them come back with whether or not they go the color changed.

  • Pairing E51 to LG webslider problem needs help

    followed instuctions entered in code in both phones phones pair but will not support ??? can search E51 via webslider however not webslider via E51??
    please help? 

    Must be some strange bluetooth problems with the E51. My newly E51 doesn't connect automatically either to my nokia BH-101 headset! I have to connect manual every time (which is very annoying!!) and after the headset has been switched off I even have to enter the connection code every time, even if I select to have it connected automatically??

  • Another Infinite Login Loop Problem - need help badly

    Hello. I need help.
    When I start up my iMac (24 inch last generation model) I can't log into the OS. When I enter my password I see the default OS wallpaper (nothing else) then it kicks me to a blue screen then right back to the login. Same thing over and over. I've already ran disk utility off of the install CD to repair permissions, etc... but no luck. This even happens when I enter into safe mode. I'm running the latest version of the OS.
    Can anyone help me?

    Restore the bootable backup/clone or Time Machine backup. Without one, you have a difficult situation. First thing to try is boot with your install disc, run Disk Utility, and repair the disk.

  • Ipod nano Problems need help fast!!!!!!

    I got my nano in october everything was working fine.Until 2 weeks ago my ipod wasnt getting reconized by itunes.Im really getting frustrated and i need help.

    Welcome to Apple Discussions!
    Read through this...
    http://docs.info.apple.com/article.html?artnum=61711
    btabz

  • Urgent Problem, need help asap.

    Hello everyone,
    I'm sorry for the alarmist title, but I need help and I need it badly. Just last night, my macbook froze with nothing working. The mouse froze, the interrupt keys didn't work, nothing. I shut down the laptop, and tried to restart. I noticed a clicking sound coming from the lower left hand corner of the macbook. I'm assuming this is the hard drive.
    What happens is that there will be two clicks happening in a rythmic fashion, and after 15 second of booting up, a folder will appear with a question mark on the screen. The only thing I can do is power it down. Can someone please describe what is happening and make suggestions?
    The kicker is that I'm a college student studying in Denmark for the semester. The laptop is my only lifeline to back home. Please, any help is greatly appreciated.
    Matt

    You may have a disk failure or simply corrupted files. If you have a bootable backup that is working, then you can boot from it, erase your hard drive, then restore your backup. If not then do this:
    Repairing the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger and Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
    If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger, and 4.1 for Leopard) and/or TechTool Pro (4.6.1 for Leopard) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    If the drive is OK then you can reinstall OS X:
    How to Perform an Archive and Install
    An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
    1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
    Repairing the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
    3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
    4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
    5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
    6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

  • Setup Problem - Need Help Please!!

    My problem is a low hum eminating from my speakers every time I connect my MPC2000 sampler to my audio interface.
    My setup consists of the MPC2000, a Dj Mixer, and my laptop which has an M-Audio interface which I use to connect the mixer & MPC. Basically, as soon as I remove the cables that connect my MPC or my mixer to my interface, the hum stops. I've tried different cables, new cables, a ground adapter for the MPC to change it to 2 prong, and nothing helps. The only thing that DOESN'T cause this hum when plugged into my interface, is my keyboard, so i'm quite sure the interface itself isn't the problem.
    Does anyone know what might be causing this interference that's resulting in a hum? I have exhausted all my own theories and am desperate for some sort of help! Many thanks in advance!!!

    Hi beirut,
    Try the following:
    1.Put the mpc2000,the dj mixer and your computer all in the same power outlet from the wall.
    2.Go to home despot and buy a few gray-colored ground lift plugs (they must be gray)
    3.With these gray ground lift plugs,lift the MPC2000.test the system.No hum=solved problem.hum still there or different,list the DJ mixer.
    4.Is your DJ mixer hooked up to turntables? If so,you need to ground the turntables to a proper ground.Good turntables have a little wire coming out of them,just for that purpose.
    5.Try turning off any TVs,refridgerators,fluorescent lighting(the ones that look like office lights),and other things around your place,and see if the hum goes away.
    6.Try using a DI box for your DJ mixer,to plug it in to the DI,and then out to the audio interface.
    7.And Most Importantly... RUN AND BUY A DIFFERENT BRAND OF AUDIO INTERFACE!!!!!!!!!! M-Audio...yucky yucky yucky!!!
    Cheers

  • Serius project problems - Need help please

    Hi,
    I'm using adobe premiere and after effects to my last film (this is not the first time). I'm using DV 1280*720 default sound settings (as I did before in other movies). I have an Imac C2D and plenty of hard disk space.
    Yesterday when I import new takes and done some light fx's (blur 10% and tint) when I saved the premiere frozen for 30 minutes and then I had to force quit.
    When I've tried to open that project again, it just don't open. I've tried everything. See if there was any corrupted file, checked for Hard drive problem (it doesn't have any) and I delete the previous rendered files (as I saw on some tutorial).
    At least I could recover that project using autosaved and previous project backup (I take care always of saving backups).
    But when I saved again (the new recovered and rendered project) it freezes on quit and there comes again. (it seems that premiere it is getting something from the old(damaged) project and just stack there !!!!!!
    The project then it just don't open (I don't see any error message) I just see after 1 hour my premiere freezed and there is no way to see the timeline to fix anything.
    I assume that I have to recover again and to all work over and over. I saw some forums talking about adobe "broken links" something related to video files source and corrupted files, but I still don't get it (since premiere doesn't tells me what is going wrong!!!!!!). They talk about deleting MACC file on windows but I'm on a mac. I didn't saw any tutorial about recovering.
    whe this thing happens I see my timeline with video and audio. I can render but when I quit the program doesn't load the project again.
    Please any help...... I'm working since a month ago on this movie and I need to deleiver that asap.
    Is it better to export the video in parts and them join in a new project or there is any other thing that I can do without missing my month of work.
    ohhh man I just want to scream

    For any reason that I can't explain when I arrived home after day work, I've tried last time before looking my backups and Premiere loaded my project
    Before save and quit I've take a look in all file (check the link and where is the source) I found 2 still frames (photos) were lost ( i mean from my hard drive).
    My biggest clue now it is, when I deleted some video file before, when I enter the premiere project 1st thing that show it is a windows asking me to "point" where is that file.
    But when happens with a photo, premiere doesn't say that this files are lost. It just stucks your project. Any tip to prevent this again?
    Hardware Overview:
      Model Name:    iMac
      Model Identifier:    iMac7,1
      Processor Name:    Intel Core 2 Duo
      Processor Speed:    2.4 GHz
      Number Of Processors:    1
      Total Number Of Cores:    2
      L2 Cache:    4 MB
      Memory:    4 GB
      Bus Speed:    800 MHz
    Intel ICH8-M AHCI:
      Vendor:    Intel
      Product:    ICH8-M AHCI
      Speed:    3 Gigabit
      Description:    AHCI Version 1.10 Supported
    WDC WD3200AAJS-40VWA1:
      Capacity:    298.09 GB
      Model:    WDC WD3200AAJS-40VWA1
      Revision:    58.01D02
      Native Command Queuing:    Yes
      Queue Depth:    32
      Removable Media:    No
      Detachable Drive:    No
      BSD Name:    disk0
      Mac OS 9 Drivers:    No
      Partition Map Type:    GPT (GUID Partition Table)
      S.M.A.R.T. status:    Verified
      Volumes:
    iMac:
      Capacity:    297.77 GB
      Available:    158.68 GB
      Writable:    Yes
      File System:    Journaled HFS+
      BSD Name:    disk0s2
      Mount Point:    /
    ps: about your question "Next, please verify your Project/Sequence Presets. Do they match your footage 100%?" I've changed 2 video files, they were pretty bigger than the part I was taking for this project, so I edit and save just the part that I am using.
    Btw I've heard that Journaled HFS+ it is not good on Imac to use premiere render option. Is that right?
    Many thanks in advance.

  • Major iPod Problems, Need Help Solving

    One day I was casually syncing my iPod video with my computer to get a few new songs uploaded onto it.
    Suddenly, the iPod freezes up, shuts itself off, restarts, and magically it has forgotten everything and pretends it is a brand new iPod.
    No problem, I think, believing it will just need to load the songs again and everything will be fine.
    However, this is not the case.
    The iPod would then continue to load all the songs, shut down after loading them, restart and again pretend it is brand new and lad all the songs again.
    This continues to happen again and again.
    I try to update my iPod, figuring it may just be a version error or somesuch nonsense. The updater refuses to work and actually causes my iPod to crash, saying it has a diskwrite error.
    It refuses to "System Restore" on my computer, so I run the "System Restore" on another window computer that I own. And it runs just fine, making the iPod load songs once more.
    And I think, problem solved!
    However, again, this is not the case.
    I load it once, everything goes fine.
    The nxt day, after buying more songs, I try to upload and after the upload, the iPod shut off, restarts, and pretends to be new once more.
    I go through the "System Restore" process again, but afterwards, the iPod all out refuses to upload my music fully, shutting off about halfway through the process each time.
    And now whenever it is plugged into my computer, windows says it is unreadable and must be reformatted, so I run the updater and it says that there is an "iPod manager internal error" which could basically be another language considering my only basic knowledge of computers.
    Is there any way to repair my iPod at home? Or must it be sent in to Apple?

    GREAT NEWS!
    Last night, through some very thorough digging in the
    "Search Discussions", I found the answer and now my
    iPod is running perfect once more!
    Thank you very much for your help b noir. Without
    you, and many others on this board who had their
    problems solved by equally helpful people, I would
    still be digging through Apple's support section to
    no avail.
    PS. I found the answer in http://discussions.apple.com/thread.jspa?message
    ID=1539429

  • Backup Database Problem  - Need help  --  thanks!!

    I have backed up my LR database every few days and have had it check for corruption. Things were fine until today when I went to back it up. I received a message saying "Cannot write one file". That was the extent of the message. It didn't say that I had a corruption or give me an obvious error type warning. I rebooted my PC and repeated the maneuver without success.
    I then opened my most previous DB, from last week, and when I tried to save it, I got the same "Cannot write one file" message.
    LR appears to be working fine and all my metadata information seems intact.
    What does this mean and what should I do? I need to back up my database otherwise I feel very vulnerable to problems.
    Thanks for yor help! Marc - Syracuse, NY

    Thank you for the interest...
    I am using a Windows XP workstation and using the native LR database backup routine to backup the file to an external Western Digital harddrive. The WD HD has tons of room and, for some reason, the backup routine would tell me that it was "unable to write one file".
    I've tried reverting to an prior copy of the DB and now it seems okay. But I lost some of my recent work and feel a little less secure about putting all my edits/metadata into LR if I can be at risk for losing it again in the future.

  • S9e Fan problems - need help ASAP

    Hi,
    I need quick help; my poor netbook is running without fan on. I can't really use it but carefully I can chat on msn and check pages that don't require flash and things like that. It's between 60°C and 72°C.
    I've been using an S9e for more than a year, and didn't have problems besides fan always being on, but I got used to it.
    So the reason why I'm posting..
    Last week the fan began to only sometimes give a weird noise - but other times it worked normally  - like something was making it hard for it to spin, I thought I'd might have to put some oil into it or clean out the dust.
    But today, when I turned it on, when I got home from school, I noticed that fan didn't spin up on boot as it should, and used to.
    I thought it wasn't a big thing, kept computing, but when I didn't hear the fan for atleast an hour I started to be afraid.
    I checked the temperature it was quite hot, so I quickly turned it off. Disassembled it (out of warranty already), to check if it was just dust. No, it was quite clean.. Checked the cables, then reassembled the netbook. Hoped that it will spin up upon booting, but it did not. I checked and the fan works when it gets it's 5V, but the system simply does not power it, or I don't know.
    Here's when I have ran out of ideas..
    Please help if you can, I need it.
    Thanks in advance,
    iScream

    Hmm. If the fan had been making noises, I would tend to blame the fan. You can order a replacement here -> http://www.lenovospareparts.com/31035655--S10-Fan-​and-Heatsink_p_309.html
    Less likely, but possible is that the control circuit on the system board is toast. I think I would try to replace the fan, even though you can force it to run with 5V.. first.
    ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
    Mark Hopkins
    Program Manager, Lenovo Social Media (Services)
    twitter @lenovoforums
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Big email problems- need help asap

    I really hope someone out there can help me. I posted this same problem last night but I'm dying for some help. I 'm new to BB and can't set up my email account. We are a small company using Microsoft Exchange and access our email away from the office using Outlook web access. I'm going step by step doing everything it asks and when I'm done I get a message saying connection could not be established and to check that the server name is correct and that the server is available. I know the server name is correct because I use it on my laptop all the time to access my emails. Does anyone know how to check if the server is available? do I need some software I don't have? can I use the BIS to create an account and sync with my work outlook without having to change my email address. I'm very computer unsavoy and could use someone's knowledge. PLEASE HELP!!!!!!!!!!!

    chk these three knowledge base articles about typical OWA setup issues:
    http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB03133&sliceId=SAL_Pub...
    http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB04804&sliceId=SAL_Pub...
    http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB02858&sliceId=SAL_Pub...
    Message Edited by BBsingh on 09-24-2008 01:23 PM
    Click on KUDOS to appreciate our efforts and mark the thread RESOLVED if your issue is resolved.

Maybe you are looking for

  • [Workaround] Calling BPEL process from jspx causes DCA-40012 error on AS

    Hi! I've created a DataControl for my BPEL process in my application (ADF BC 10.1.3.3). I've created command button on my jspx page that has ActionListener binded to a backing bean method that calls commit and than my BPEL process through the binding

  • Available port numbers

    hello, can anyone help me to found the oracle port reserved numbers eg 1521,1523 for listener etc.. thanks in advance

  • Video Transitions for Adobe Premiere Pro CS4

    Adobe Premiere Pro CS4 contains/includes very few useful video transitions for my work. There were many very useful, sophicticated and great third party plugins for video transitions for earlier versions of Premiere (i.e. Premiere 6.5), but most of t

  • IDES information

    Hi all, I am a newbie here, hope there is someone in this forum that can help me with my queries below. 1. Just installed IDES 4.7SR1. Just wonder whether any application data included in the IDES because I did not see any data in client 000 and clie

  • Getting Reciever Order Status for Timesheets

    Hi Experts, I need to know the exact status ( TECO,Created , Locked etc) of the 'Service Order' against which an employee is booking his timesheet. On the basis of these statuses i need to show some warning messages. Is there any FM to determine this