Some of the 2811 router would power off and can't power up

We have some 2811 routers in our remoted offices. There wasn't any power surge or outage, but the router has no light and no power. Pressed power switch, didn't turn on. I have to leave the power switch button to ON, then unplug the power cord from the router and reseat it.
It would work fine.
Has anyone experience this problem before?

This could be a cable issue as already mentioned. It could also be a marginal power supply problem. I've seen a problem like this on a PC recently and it turned out to be the power supply.

Similar Messages

TS1292 How do I redeem my gift card if some of the activation code numbers peeled off and so now I can not read them? Will I be able to use the serial code?

I got a gift card to itunes for my birthday. Some of the activation code peeled off the card when I removed the sticker and I am unable to figure out the code. How do I redeem it now? the serial code? If so where?

http://support.apple.com/kb/TS1292

Ive got a Mac Pro bought seconf hand, It doesn't allow me to update as the username is blocked to the previous owner, it appears off and can't change it, the box goes directly to password. I have changed the computer username and password but the problem

Ive got a Mac Pro 2010, bought second hand through eBay. When it comes to update the software, the username is blocked to the previous owner. It appears off and the box goes directly to password. I have tried to reset then to log in in apple store with my login but didn't help. I would appreciate any tips to sort it out
Thanks fellas

That machine did not ship with Mountain Lion (Mac OS X 10.8), so that means the copy of Mountain Lion on the machine was purchased by the former owner and is non-transferable. It is permanently linked to his/her Apple ID, so you cannot update or reinstall it.
What you need to do (which the seller should have done for you) is reinstall the original system that that machine came with. I believe that would be Snow Leopard (Mac OS X 10.6). What you need to do is reinstall that system from the original disks. If the seller did not provide those disks, you can call Apple and get them replaced for a small shipping and handling fee.
For more info, see:
http://www.thesafemac.com/how-to-prepare-your-mac-for-sale/

HT4623 Hi, Im using an iPhone 4 8gb and recently updated my software using my computer to iOS 6.1.3 and some of the tabs are now grayed out and cant function (specific reference to "Show My Caller ID - On/Off tab"). is there a way to fix this or can i do

Hi, Im using an iPhone 4 8gb and recently updated my software using my computer to iOS 6.1.3 and some of the tabs are now grayed out and cant function (specific reference to "Show My Caller ID - On/Off tab"). is there a way to fix this or can i downgrade back to my default software?

Hi imobl,
Thanks for your response, I forgot to add that the five 3uk sims we have in use, I have tried all of them none of them are recongnised non of them have pin codes, I even purchased four more sims Tmobile (original carrier) Vodaphone, 3 and giffgaff.

Need some help in saving video message from viber to my Iphone. I disabled the thing that would save photos and videos automatically then, there comes a video I want to save. After loading and watching it, I press the "save to gallery"

Need some help in saving video message from viber to my Iphone 5S with new ios 8's program . I disabled the thing that would save photos and videos automatically then, there comes a video I want to save. After loading and watching it, I press the "save to gallery" thing but it doesn't save in gallery. I tried all, restarting my phone, rebooting then turning on the save automatically thing and when I watch it again, it still wouldn't save.

Probably a good question to ask Viber or look at their support site.

I'm getting the grey screen during start up and can't boot the computer. I did a cmnd R but worried it would automatically wipe my hard drive and reinstall OS. Is there a risk at cmnd R will result in wiped HD without me actively making that choice?

I'm getting the grey screen during start up and can't boot the computer - MacBook Pro with lion.
I did a command r after doing some research but got nervous that it would automatically wipe my hard drive and reinstall OS.
I was nervous because it asked me for language for software use before any options were presented (such as repair via disk utility). It looked similar to an OS install.So I powered off....Is there a risk at command r will result in wiped HD without me actively making that choice?

Repair the Hard Drive and Permissions - Mavericks, Lion/Mountain Lion
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
Reinstall Mountain Lion or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is
three times faster than wireless.

Sometimes I get a message that says that safari is not connected to the web when I trie to get to a particular website. However, it will let me go other places on th web. The only time shutting it off and on again works is when I am at the apple store.

Sometimes I get a message that safari is not connected to Internet while trying to reach a certain web page for work. The onl time shutting it off and on works is when I am at the apple store. Then I will usually get it to work for another day. Is there some other trick

Hello Theresa818,
Thank you for using Apple Support Communities!
It sounds like the cellular data will not activate for some reason on the iPad.
I found this article that will help you resolve this issue here, named iPad (Wi-Fi + Cellular Models): Troubleshooting a cellular data connection, found here http://support.apple.com/kb/TS4249
Check for a carrier settings update.
Update your iPad.
Toggle the Cellular Data setting off and on under Settings > Cellular Data.
Restart your iPad.
Tap Settings > General > About. Locate the Carrier entry and make sure that your carrier is correct.
If your SIM card has SIM PIN enabled, try turning it off: Tap Settings > Cellular Data > SIM PIN.
Make sure you're in an area of good coverage. If the cellular data connection works in another area, contact your carrier to report the original affected area.
Reset network settings: Tap Settings > General > Reset > Reset Network Settings.
Restore the iPad as new.
If none of the above steps resolves the issue, make an appointment at an Apple Retail Store, contact your carrier, or contact AppleCare to troubleshoot further.
I know you may have done one or two of the steps here, so you can skip those.
Take care,
Sterling

My iPhone has a protective cover on it and I carry it in my pocket a lot. Quite often when I take it out of my pocket the silent/ring switch is off and I am sure it was on when I put the phone in my pocket. How can this be happening?

My iPhone has a protective cover on it and I carry it in my pocket a lot. Quite often when I take it out of my pocket the silent/ring switch is off and I am sure it was on when I put the phone in my pocket. How can this be happening?

Protective cover as in screen protector? This would have nothing to do with the silent switch.
If you're referring to an actual case though... take the case off and see if the problem continues.
It may be as simple as the silent switch being lose, which will require a device replacement to resolve.

Hello, I have a problem with the keyboard of the device, some of the keys do not respond. What can I do? Amit

Hello,
I have a problem with the keyboard of the device, some of the keys do not respond.
What can I do?
Amit

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings (if you can)
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

All of a sudden, the radio signal LEDs went off and node went dead

In order to change the I/O variable data type of my node from single to array of single, I simply press and hold the rest button on WSN-3202 for 7seconds. At the end of it, the radio signal LEDs went off and node went dead. All attempt to bring it back to life proof abortive. What should I do?
Blessing

Hi Blessing,
If you've tried everything to get it working, including a fresh set of batteries or direct power from an adaptor, then you should contact your local NI branch regarding the repair process. The contact information for your branch can be found on http://sine.ni.com/apps/utf8/nicc.call_me.
Regards,
Imtiaz Chowdhury
Head of Digital Technologies
Brand786

Refurbished iPod touch 3rd gen won't start. Just got it today to replace my broken one. It freezes at the screen with the apple logo, then flashes off and tries to restart again. Help,

Refurbished iPod touch 3rd gen won't start. Just got it today to replace my broken one. It freezes at the screen with the apple logo, then flashes off and tries to restart again. Help!

I have tried holding the power home button but all that does is turn it off. When I try to start it again it goes into the same loop.

Hi. After I have loaded a picture into Photoshop some of the menu tools are greyed out and I cannot use the keyboard short cut, for instance I cannot use Ctrl T to enter free transform mode. Also the toolbar is so small I cannot see the icons without ge

Hi. After loading a picture into Photoshop some of the menu tools are greyed out and I cannot use the keyboard short cuts, for instance I cannot use Ctrl + T for free transform, how do I resolve this problem. In addition the tool Icons are so small I have to get close to the screen to see them, is there anyway the Icons can be made bigger without reducing the resolution of the screen.
Thanks
Derek

Are you working on a background layer? If so, Ctrl + T will not work. Press Alt and double-click your background layer to convert to a normal layer (or right-click BG layer and select Layer from Background) and try again.
If you're working in Photoshop CC 2014 you can go to Preferences > Experimental Features and tick "Scale UI 200% for high-density displays" to make your buttons and icons larger.

I have iTunes Match, but some of the music I loaded from CDs and I can see in the iTunes store won't play. It recognizes the album but is playing literally the only 3 songs I don't want to listen to.

have iTunes Match, but some of the music I loaded from CDs and I can see in the iTunes store won't play. It recognizes the album but is playing literally the only 3 songs I don't want to listen to.
How do I get to play all of my music that should be stored either on the computer or in the cloud?

Hi,
Initially your music should be in your iTunes library on your computer. Once match completes its scan, your music will have been matched or uploaded. I suggest that you add iCloud status column to song view. This will tell you what has been matched, uploaded, purchased, inelligible, duplicate or waiting. What is the status of your tracks that are not playing.
If space is not an issue, I suggest that you keep the music on the internal hard drive otherwise you can delete the tracks and play from cloud. In both instances, you should maintain a back up of all your music on a separate hard drive.
Jim

I have more than one copy of the same song in my iTunes. Some have the icloud symbol next to them and some do not. I need to clean this up but I am afraid to delete the songs for fear I will lose them.

I have more than one copy of the same song in my iTunes. Some have the icloud symbol next to them and some do not. I need to clean this up but I am afraid to delete the songs for fear I will lose them. Please help! On top of that my Mac keeps telling me my start up disc is full and I am deleting stuff like crazy!

Welcome to the  Discussion Forums
It won't be a problem if you delete your extra copies.
I don't download very much to my tv, I do sometimes if I'm in bed but usually I do it from itunes. However if you have not fully downloaded something to the tv it is possible to start the download from itunes as well, you have likely activated 'check for downloads fin itunes in some way, could be by opening itunes, selecting 'check or downloads' from the advanced menu or that you simply have automatically check for downloads set in your prefs and it has checked coincidentally.

For some reason the Apple ID window in iTunes and App Store now seems to have a character number constraint. As a result I am unable to enter the final few characters of my Apple ID which I have had for many years. Does anyone know what has caused this?

For some reason the Apple ID window in iTunes and App Store now seems to suddenly have a character number constraint which prevents me using my 29 character Apple ID. As a result I am unable to enter the final few characters of my Apple ID which I have had for many years. Does anyone know what has caused this?

You need to ask Apple for assistance with getting back into your old ID. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to resolve this issue through the Account Security team, fill out and submit this form.
(118441)

Some of the 2811 router would power off and can't power up

Similar Messages

Maybe you are looking for