All of a sudden, the radio signal LEDs went off and node went dead

In order to change the I/O variable data type of my node from single to array of single, I simply press and hold the rest button on WSN-3202 for 7seconds. At the end of it, the radio signal LEDs went off and node went dead. All attempt to bring it back to life proof abortive. What should I do?
Blessing

Hi Blessing,
If you've tried everything to get it working, including a fresh set of batteries or direct power from an adaptor, then you should contact your local NI branch regarding the repair process. The contact information for your branch can be found on http://sine.ni.com/apps/utf8/nicc.call_me.
Regards,
Imtiaz Chowdhury
Head of Digital Technologies
Brand786

Similar Messages

When my phone is powered on and not in use all of a sudden the Samsung Galazy 5 then Samsung and the verizon logo comes on to frequent all threw out the day . Has this happened to anyone else ?

When my phone is powered on and not in use all of a sudden the Samsung Galaxy 5 then Samsung and Verizon logo comes on tell me to check my battery cover, I have checked it and it is secure but it still continues to happen all day long. Has this happened to anyone else?

My phone is 5 days old and does the exact same thing.
Just check the box that says do not show again when it pops up. That should Stop the pop ups all the time.
I am very dissapointed with my phone . My S5 has been very buggy, likes to freeze up , lags , drains battery in about 4-5 hours, loses data connection in "Good Signal" areas ( drops down to 3g and 1x data or says 4g lte but Web pages fail to load , say no data connection). Camera has also crashed on me twice already.

When I use my computer for any amount of time all of a sudden the fan starts up full blast and everything freezes

Nothing works after this happens its happened 3 times now, the first I just forced shut down and re started, the second I force shut down and left it off for the night, the third time I let it run like that for a bit to see if it would control itself but after a small amount of time I forced shut it down again.

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time after you had the problem. Select the messages logged before the boot, while the system was unresponsive or was failing to shut down. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V). Please include the BOOT_TIME message at the end of the log extract.
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post any other kind of report — it will be very long and not helpful.

IPhoto randomly stopped letting me drag/drop photos into finder. It's been working all week and all of a sudden, the photos bounce back into iPhoto and don't copy. I tried to rebuild the iPhoto library using the ALT CMD buttons, but that didn't work...

Any suggestions?

What happens if you export the photo (file menu ==> export)?
What do you see if you right click on one ane reveal in finder?
LN

HT1766 hi i am very dissapointed with my i phone i went on a six day holiday and of course i took several photos and videos... i was then using facebook on my i phone and all of a sudden the phone reset by its own and i lost all of the information..

i need help thanks

Oh boy! Acting kind of weird seems to be an understatement, aquaequus!
What type of troubleshooting were we able to do with you? I want to make sure that we can get some sort of resolution for this problem.
It is quite possible the battery door may get your phone in working order again. I'm not sure if the store has it in stock, but it is available in our warehouse for $14.99 which can be ordered via customer service.
Tamara H.
Follow us on Twitter @VZWSupport

I have a macbook air and and hdmi that i have used many times, but not all of a sudden the tv won't recognize the hdmi. The computer flashes when it is plugged into the hdmi but the tv says "no signal" and the airplay displays option says "no device"

I have a macbook air and and hdmi that i have used many times, but not all of a sudden the tv won't recognize the hdmi. The computer flashes when it is plugged into the hdmi but the tv says "no signal" and the airplay displays option says "no device detected" and the drop down bar is grey and locked.

I have a macbook air and and hdmi that i have used many times, but not all of a sudden the tv won't recognize the hdmi. The computer flashes when it is plugged into the hdmi but the tv says "no signal" and the airplay displays option says "no device detected" and the drop down bar is grey and locked.

So my iPhone 4S started draining battery after recent update, battery got changed and it worked perfect for 3 days, all of a sudden the phone won't stay on unless connected to mains... Cannot receive any signal "searching" constantly. HELP

So my iPhone 4S started draining battery after recent update, battery got changed and it worked perfect for 3 days, all of a sudden the phone shut down and now won't stay on unless connected to mains... Claims its at 100% battery but thats impossible as it was at 30% before it shut down randomly.
Cannot receive any signal "searching" constantly.
Turns off as soon as removed from usb ... wont stay on connected to laptop!
HELP!

The iPhone includes a one year warranty. If an Apple store is not nearby, you can call AppleCare and handle an exchange under warranty over the phone. The exchange will be shipped to your door - someone must sign for the delivery so if no one will be at home, have it delivered where you work. You use the same box to return the existing iPhone back to Apple. Return shipping label and tape to reveal the box incuded - call the carrier with number incuded when the box is ready to be picked up. AppleCare will request a credit card in the event the existing iPhone is not returned within 10 days after the exchange under warranty is received.
Hardware can fail - it happens, which is why there is a one year warranty.

I have been using Photoshop Elements 8 for years. All of a sudden, the cropping tool changed: I cannot crop vertically or horizontally anymore--only diagonally. This has made it impossible for me to get the photo I want. I hope someone knows how to fix th

I have been using Elements 8 ever since it came out, and all of a sudden the cropping tool has changed: I can no longer crop horizontally or vertically, only diagonally. The up/down/side arrows have disappeared! Please help if you can, I'm no longer able to make my photos look their best. Thank you in advance.

Quit the editor (Quit PSE on a mac). Then restart it while holding down ctrl+alt+shift (command+option+shift). Keep the keys down till you see a window asking if you want to delete the settings file. You do.

The other day I was writing an essay while listening to my iTunes. Then all of a sudden, the power of my house went out. When we finally got power back, and I was able to open up itunes, over 700 songs of mine were deleted. How do I get them back?

The other day I was writing an essay while listening to my iTunes. Then all of a sudden, the power of my house went out. When we finally got power back, and I was able to open up itunes, over 700 songs of mine were deleted. When I looked in the trash, I saw two things labled "iTunes library extras", and "iTunes library genius". When I tried opening them, it said that I needed to open them with an application, and that I needed to chose one. I chose iTunes. When I tried double clicking on "iTunes library extras" after this, all it did was open up iTunes. Nothing else. Someone please help me because I had a lot of songs that I liked, and recently downloaded. And it will be a pain to get them all back if no one can help me.

Are the files still physically on your HD?
[User]/Music/iTunes/Media/Music is the default location. Unless you suddenly have a bunch of new "free space" on your hard drive, they're still where they were, you just need to create a new library file.

All of a sudden the screen on my iMac 10,1 is too small for the image. Can't figure out how to reduce the size of the Finder or any of the Apps.

All of a sudden the screen is too small for the image. Hard to explain, but in order to see the entire Finder window, I must scroll the image up/down, left/right.
It's not just the Finder though, all of the apps are affected this way too.
It's probably got something to do with the fact that I have an HDMI cable running from the Mac to a Vizio 42" TV. It's been running this way just fine for over two months though.
Any ideas?

You probably accidently zoomed the screen. Hold down CNTL while scrolling down with the mouse or trackpad to unzoom. Cntl - scroll up to zoom.
Regards,
Captfred

Hi, I was using my iPod Touch and then all of a sudden, the screen went black. So I held the the on and menu button to reboot it and so it shut of and came back on and been on the loading screen for an hour. What can I do to fix it?

Hi, I was using my iPod Touch and then all of a sudden, the screen went black. So I held the on/off button and menu button to reboot it. So it turned off then back on but it has been stuck on the loading page for an hour. What's wrong with it?

- Let the battery fully drain. After charging for at least an hour try here:
iOS: Not responding or does not turn on

I was editing vacation photos in aperture 3 all of a sudden the thumbnail disappeared and now all i have is a vertical white line and an orange flag... how do i get my photo back? thanks

i was editing vacation photos in aperture 3 all of a sudden the thumbnail disappeared and now all i have is a vertical white line and an orange flag... how do i get my photo back? thanks

     Hi Frank.
     I have just had jb Atlanta's problem while adjusting the contrast on a photo. I was creating a slideshow at the time. After a lot of reading up I was about to give up when I tried restoring the file to its original settings as you suggested. Bingo!
     However, that would only work for me, if I restored the settings while in the slideshow. All data had 'disappeared' when I attempted to open the photo in its original project folder.
     Hope this is of help. Many thanks.

Ipod 5th generation will not turn on, charge, or connect to macbook laptop. i was using it for music then all of a sudden the screen went black and was unresponsive. i have tried using other cords. also my home button is broken. someone please help!

ipod 5th generation will not turn on, charge, or connect to macbook laptop. i was using it for music then all of a sudden the screen went black and was unresponsive. i have tried using other cords. also my home button is broken. someone please help!

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

My keynote seems to be misbehaving. Me, a teacher was preparing a ppt on keynote.all of a sudden, the navigator column to my left goes black and nothing seems to move. Please help! Only 12 hours before I take class.

My keynote seems to be misbehaving. Me, a teacher was preparing a ppt on keynote.all of a sudden, the navigator column to my left goes black and nothing seems to move. Please help! Only 12 hours before I take class.

Hi KRKabutoZero,
Welcome to Apple Discussions
You may want to look at Knowledge Base Document #58042 on A flashing question mark appears when you start your Mac.
Do you have access to another Mac? You may want to backing up your files via Target Disk Mode (TDM) as well as running some utilities (Knowledge Base Document #58583 on How to use FireWire target disk mode.
You may want to invest in a utility like DiskWarrior from Alsoft. It is great for troubleshooting drive malfunctions.
As said before, you may also want to bring your iBook to your local Apple Store/Reseller.
Jon
Mac Mini 1.42Ghz, iPod (All), Airport (Graphite & Express), G4 1.33Ghz iBook, G4 iMac 1Ghz, G3 500Mhz, iBook iMac 233Mhz, eMate, Power Mac 5400 LC, PowerBook 540c, Macintosh 128K, Apple //e, Apple //, and some more... Mac OS X (10.4.5) Moto Razr, iLife '06, SmartDisk 160Gb, Apple BT Mouse, Sight..

HT4623 am trying to update my ipad using wireless,all of a sudden the electricity failed,and i dont have enough battery to complete the process.now my ipad didnt come up again.

pls kindly assist me on what to do,i got an update from my ipad software and i tried updating through wifi,all of a sudden the electricity went off and i dont have enough power on my ipad until it goes off.so the upgrading process didnt finish.now my ipad didnt come up.what can i do pls.

Have you recharged the battery? If so, try this... hold down the power and home buttons until the Apple icon appears, then let go.

All of a sudden, the radio signal LEDs went off and node went dead

Similar Messages

Maybe you are looking for